Compoka Electronic Technology KBJ-229N Bluetooth headphone User Manual KBJ 229N

Shenzhen Compoka Electronic Technology Co., Ltd Bluetooth headphone KBJ 229N

15_KBJ-229N UserMan.pdf

Download: Compoka Electronic Technology KBJ-229N Bluetooth headphone User Manual KBJ 229N
Mirror Download [FCC.gov]Compoka Electronic Technology KBJ-229N Bluetooth headphone User Manual KBJ 229N
Document ID2991881
Application IDQEW5bq/joaBHGaDDgJ6olQ==
Document Description15_KBJ-229N UserMan.pdf
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize285.88kB (3573440 bits)
Date Submitted2016-05-16 00:00:00
Date Available2016-05-16 00:00:00
Creation Date2015-10-21 17:05:31
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2016-05-16 13:50:17
Document TitleKBJ-229N_说明书英文
Document CreatorAdobe Illustrator CS5
Document Author: Administrator

Bluetooth 4.0
Stereo Headphone
KBJ-229N
User's Manual
Thank you for selecting our latest Bluetooth headphone, please
read this User's Manual carefully before you operate this
headphone, and please save this Manual for further reference.
Before operating, please read all the Safety notice to make sure
the safe and appropriate use.
It will damage your hearing if you listen with high
volume for a long time. It is recommended that
only use the lowest volume which is necessary
for speaking and listening to music.
# 
USB Charging Cable:

Please observe the rules of the Country or Region which you
are in while driving.
Do not disassemble or modify the headphone at any reason,
otherwise, It may damage or burn the headphone.
If there is any quality problem, please send the headphone to
authorized service center for repairing.
Please keep the equipment along with all the accessories out
of the reach of children and pets. It will cause suffocation and
serious injury.
Do not put the device under the environment which the
temperature is too low or too high ( Below 0ņ or over 45ņ).
Extreme temperatures will cause the device deformation,
reduce the charging capacity and shorten the working life.
Please do not wet the device, for the liquid can cause serious
damage to the device. Please do not touch the device by wet
hands. It is out of the maintenance range for the damage
caused by water.
Please avoid closing to the eyes of children and pets when
using the flash indicator of the device.
Please do not operate the device in thunderstorm weather.
Bluetooth enter pairing mode
01


2.Instruction

 
Extendable
Power switch
LED indicator
Next Song
Volume Increase
Power switch
Pairing
Play/Pause /Receive
  
Re-dial the last
phone No
Previous song
Volume Decrease
USB Charging Port
Ear cushion
D3.5mm Plug port
Microphone
※  
   
3.5mm Audio Cable, User’s Manual
02
STATUS
VOICE PROMPT
Bluetooth is turned on
3.5mm Audio Cable:
1. Guide
Safety Notice:
$  
Pairing
Switch on : Press 2 seconds to switch on , the Blue
indicator will be in (It will appear voice prompts in
English). Press 2 seconds again to enter into pairing
mode, meanwhile the red and blue indicators take
turns to flash. It will turn off automatically when no
device to connect in 5 mins ) .
Switch off : Press 4 seconds to switch off , the Red
indicator flashes one time means the device is
switched off.
  
!   "   
Play/Pause
again to end the phone call.
Receive
   Press the key for 2 seconds to reject the phone call.
Re-dial the last Press the key by twice continuously to re-dial the last
phone number.
phone No
In Music Mode, press it for 1 time to pause, and press
it again to play. (when phone call comes, the music will
be off. When phone call is off, the music will continue)
In Music Mode, press it to play next song.
Long press to increase volume all
Next Song
the time. The voice prompts will appear when the volume
Volume Increase
up to Maximum.
In Music Mode, press it to play previous song.
Previous song
Volume Decrease Long press to decrease volume all the time.
03
When you turn the headphone on
When entering into paring mode
Bluetooth is connected
When you connect the first mobile phone
Bluetooth is connected
When you connect the second mobile phone
Volume max
When the volume up to the maximum
Bluetooth is turned off
When you turn the headphone off
Battery low warning
Battery low
How to connect with two Bluetooth mobile phones:
(1) Turn on the bluetooth function of mobile phone 1.
%&*  !!+ 6  + 
 
switch on and enter into pairing mode, blue and red indicators
take turns to flash, make connection with phone 1.
%7*  !! + &89    
indicators take turns to flash and searching connections
automatically; meanwhile, phone 1 is disconnected.
(4) Turn on the bluetooth function of the mobile phone 2 and
 <=&&>?+ $   $@

8%F   
password 0000 if needed and the connection will be made)
(5) Turn off the bluetooth headphone and return on, the
headphone will connect with both mobile phones automatically.
H" 
 
 
 
 !
will appear in English.
04
※ When the headphone is connected with two mobile phones,
some functions of the mobile phones cannot work normally.
3. Battery power of bluetooth headphone
displayed on Iphone
※ After connected with Iphone, the battery power bar of
the headphone will be displayed on the phone.
10:30
4.Bluetooth Indicator Status
Work Status
Switch on
Indicator Light Status
Blue indicator flash 3 times
Remark
Voice Prompts
Red indicator flash 1 time
Voice Prompts
the travel charger from the power outlet and headphone.
Pairing
Red and blue indicators take
turns to flash
Voice Prompts
repeatable charge and dis-charge.
Connection
Blue indicator will flash 1 time
every 6 seconds
Voice Prompts
Phone call
Blue indicator will flash 1 time
every 6 seconds
Play Music
Blue indicator will flash 1 time
every 6 seconds
Battery low
warning
Red indicator will flash 1 time
every 60 seconds
Charging
Red indicator is on all the time
when charging
Switch off
KBJ-229N
Voice Prompts
This headphone is equipped with built-in non-detachable and
rechargeable battery.
Please make sure that the battery is charged full for the first
time use.
05
During the charging, indicator will turn to Red. If without
charging, please plug out the travel charger first, then
connect it again.
06
Please do not dial or receive phone call during charging, and
please plug out the charger from the headphone, then receive
the phone call. When the battery is low, the headphone will
appear the prompt and the red indicator will flash.
※ If the headphone shut down without battery during the
phone calls, it will switch to mobile phone automatically.
6.Audio cable connection
Line Insert 3.5mm audio cable into headphone 3.5mm plug
port, the other part into audio output device(MP3/PC), then
you can enjoy music. When the bluetooth headphone is on,
the bluetooth function will be preffered although insert audio
cable.
07
7.Project Specification and Instruction
- Bluetooth Version : 4.0 (CSR8635)
- Supported devices: Bluetooth mobile phones, Bluetooth
speakers Bluetooth PC and other Bluetooth devices
- Charging Voltage: DC 5V
- Work Voltage: 3.7V
- Sensitivity: 97Âą3dB
- Battery Capacity:300mAh
- Frequency Response: 2.402~2.480GHz
※ The actual time may vary from mobile phone types and
functions.
08
Bluetooth 4.0
Stereo Headphone
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Format                          : application/pdf
Title                           : KBJ-229N_说明书英文
Creator                         : Administrator
Metadata Date                   : 2016:05:16 13:50:17+08:00
Modify Date                     : 2016:05:16 13:50:17+08:00
Create Date                     : 2015:10:21 17:05:31+08:00
Creator Tool                    : Adobe Illustrator CS5
Thumbnail Width                 : 256
Thumbnail Height                : 212
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 12072 bytes, use -b option to extract)
Instance ID                     : uuid:59cfe79c-4756-4427-aa45-1cc29bb45d6c
Document ID                     : xmp.did:2E09B720C777E511B015DC3C27E60C5F
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:59064b91-c1de-4884-91b6-0ebf3420cc15
Derived From Document ID        : xmp.did:08F411EE8D77E511B015DC3C27E60C5F
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:75E108905522E311B568A800AF5DC982, xmp.iid:40121D9EDFA0E311A478EFF7BEFA68E8, xmp.iid:43121D9EDFA0E311A478EFF7BEFA68E8, xmp.iid:5F6DA94402A5E3119EFFEA1674FFA8A8, xmp.iid:616DA94402A5E3119EFFEA1674FFA8A8, xmp.iid:43CC04EEC016E411918D9621C15AEC15, xmp.iid:46CC04EEC016E411918D9621C15AEC15, xmp.iid:47CC04EEC016E411918D9621C15AEC15, xmp.iid:48CC04EEC016E411918D9621C15AEC15, xmp.iid:37FE6E653A69E411907CF311AACF890B, xmp.iid:AD15FCB7026AE411B26DAD294A0DD20C, xmp.iid:06F411EE8D77E511B015DC3C27E60C5F, xmp.iid:07F411EE8D77E511B015DC3C27E60C5F, xmp.iid:08F411EE8D77E511B015DC3C27E60C5F, xmp.iid:2E09B720C777E511B015DC3C27E60C5F
History When                    : 2013:09:21 08:34:23+08:00, 2014:03:01 16:22:06+08:00, 2014:03:01 16:57:31+08:00, 2014:03:06 15:38:17+08:00, 2014:03:06 15:39:22+08:00, 2014:07:29 09:37:41+08:00, 2014:07:29 14:33+08:00, 2014:07:29 14:33:10+08:00, 2014:07:29 14:35:27+08:00, 2014:11:11 15:58:53+08:00, 2014:11:12 08:27:43+08:00, 2015:10:21 15:31:39+08:00, 2015:10:21 15:32:06+08:00, 2015:10:21 15:39:06+08:00, 2015:10:21 15:41:23+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 327.756049
Max Page Size H                 : 91.999897
Max Page Size Unit              : Millimeters
Font Name                       : Arial-BoldMT, ArialMT, MyriadPro-Semibold, MyriadPro-Regular, Tahoma, HYe2gj, AdobeSongStd-Light
Font Family                     : Arial, Arial, Myriad Pro, Myriad Pro, Tahoma, 汉仪细中圆简, Adobe 宋体 Std
Font Face                       : Bold, Regular, Semibold, Regular, Regular, regular, L
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, TrueType, Open Type
Font Version                    : Version 3.00, Version 3.00, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 3.15, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895
Font Composite                  : False, False, False, False, False, False, False
Font File Name                  : ARIALBD.TTF, ARIAL.TTF, MyriadPro-Semibold.otf, MyriadPro-Regular.otf, TAHOMA.TTF, 汉仪细中圆简.ttf, AdobeSongStd-Light.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: Deleted Global Color 1822
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Cyan    : 72.985399
Swatch Groups Colorants Magenta : 16.177601
Swatch Groups Colorants Yellow  : 8.886900
Swatch Groups Colorants Black   : 0.003100
Warning                         : [Minor] Extracted only 1000 xmpTPg:SwatchGroupsColorants items. Ignore minor errors to extract all
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Page Count                      : 3
Author                          : Administrator
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AA7XKBJ-229N

Navigation menu