Computime CTLB357 ZigBee-Ready RF Transceiver User Manual CTLA357 CTLB357 General Product specifications R1

Computime Ltd. ZigBee-Ready RF Transceiver CTLA357 CTLB357 General Product specifications R1

User manual

Download: Computime CTLB357 ZigBee-Ready RF Transceiver User Manual CTLA357 CTLB357 General Product specifications R1
Mirror Download [FCC.gov]Computime CTLB357 ZigBee-Ready RF Transceiver User Manual CTLA357 CTLB357 General Product specifications R1
Document ID2778044
Application IDi03eEGENlakoChqZIRsu1Q==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize46.13kB (576608 bits)
Date Submitted2015-10-11 00:00:00
Date Available2015-10-11 00:00:00
Creation Date2015-10-10 16:32:02
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2015-10-10 16:32:02
Document TitleCTLA357_CTLB357 General Product specifications R1
Document CreatorPDFCreator Version 1.2.3
Document Author: rnd-hardyfung

ZigB
Bee-Ready RF Transce
eiver Module
(IEE
EE 802.15.4)
CTLA35
57/CTLB357
The reproduction of this datasheet is NOT
allowed without approval of Computime Limited. All information and data
contained in this datasheet are subjecct to change without notice. This publication supersedes and replaces all information
previously supplied. Computime has no
n responsibility to the consequence of using the inform
mation described in this
document.
Copyright Š 2015 Computime Liimited. All rights reserved.
Rev.1
ZigBee- Ready RF Transceiver Mo
odule CTLA357/CTLB357
Revision
Rev.
Date
(DD-MM-YYYY)
21-1-2015
History
First Released
Copyright Š 2015 Computime Liimited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Mo
odule CTLA357/CTLB357
Table of Contents
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
General Description .................................................................................................................................. 1
Applications ............................................................................................................................................... 1
Features .................................................................................................................................................... 1
Absolute Maximum Ratingss ...................................................................................................................... 2
Recommended Operating Conditions..............................................................
......................................... 2
Electrical Specifications ............................................................................................................................ 2
Typical application block ........................................................................................................................... 3
Pin Assignment ......................................................................................................................................... 4
Pin Description .......................................................................................................................................... 5
Block Diagram ......................................................................................................................................... 10
RF Frequency Detail ............................................................................................................................... 11
PCB Layout Recommendattions.............................................................................................................. 12
Mechanical Dimensions .......................................................................................................................... 13
Copyright Š 2015 Computime Liimited. All rights reserved.
Rev.1
ZigBee- Ready RF Transceiver Mo
odule CTLA357/CTLB357
1. General Description
The CTLA357 and CTLB357 are
a compact surface mounted High Power Wireless
RF Transceiver
Module specially designed fo
or Ember ZigBee™ protocol stack for wirelesss networks, EmberZNet,
based on IEEE 802.15.4 standard
in the 2.4GHz world-wide ISM
M band. The size of
CTLA357/CTLB357 is 32.4 x 25.4
x 4.1 mm. It integrated a 2.4GHz, IEEE 802.15.4-2003 compliant
transceiver with a 32-bit netw
work processor (ARM Cortex-M3 Processo
or) to run EmberZNet. It
contains embedded FLASH an
nd integrated RAM for program and data sto
orage. It utilizes the nonintrusive SIF module for powerfful software debugging and programming of the
t network processor.
2. Applications
Home
automation &
building control
Home
appliances &
alarms
Monitoring of
remote
systems
Security
systems &
lighting
controls
nsor data
Sen
capture in
em
mbedded
ne
etworks
3. Features
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Complete ZigBee-ready mo
odule with integrated PCB antenna
Integrated IEEE 802.15.4 PHY
and MAC layer
Non-intrusive debug interface (SIF)
mberZNet Serial Protocol
SPI interface for communication and controlled by the Host using the Em
(EZSP)
mer
Internal RC oscillator for tim
High performance direct sequence spread spectrum (DSSS) RF transce
eiver
16 channels in the 2.4 GHzz ISM band
On-chip regulator for 2.1-3.6V operation.
Three deep low power mod
des
32-bit ARM® Cortex™-M3 processor
192KB FLASH ROM and 12
2KB RAM(EM357 internal)
8Mb off chip FLASH memory (CTLB357)
power power
+20dBm
Max. transmission
+18dBm+/-1dBm
Max. transmission
-100dBm sensitivity
Small footprint: 32.4 x 25.4 x 4.1 mm
Extremely low Deep Sleep Current.
Copyright Š 2015 Computime Liimited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Mo
odule CTLA357/CTLB357
4. Absolute Maximum Rattings
Parameter
Test Conditions
Min
n.
Max.
Unit
Regulator input voltage (VDD_PADS)
-0.3
+3.6
Voltage on any GPIO (PA[7:0], PB[7:0],
PC[7:0]),
SWCLK,
nRESET,
VREG_OUT
-0.3
VDD_PADS
+0.3
Voltage on any GPIO pin (PA4, PA5, PB5,
PB6, PB7, PC1), when used as an inputt to the
general purpose ADC with the low voltage
range selected
-0.3
2.0
Voltage on OSCA, OSCB, NC
-0.3
VDD_PADSA
+0.3
Storage temperature
-40
+85
°C
5. Recommended Operatin
ng Conditions
Parameter
Test Conditions
Min..
Typ.
Max.
Unit
Regulator input voltage (VDD_PADS)
2.1
3.6
Operating temperature range
-40
+85
°C
Max
Unit
2.480
2.5
GHz
MSL3
Moisture Sensitivity Level(MSL)
6. Electrical Specifications
T=25ć, VCC = 3.0V, Fo =2450MHz, if
i nothing else stated.
Parameter
Condition / Note
Min
Typ.
RF Operating frequency
Programmable in 5MHz steps, 5 MHz
steps for IEEE 802.15.4 compliance
2.405
2.4
Number of channels
For IEEE 802.15.4 compliance
16
Channel spacing
For IEEE 802.15.4 compliance
Frequency stability
MHz
+/-40
ppm
+18+/-1
+20
dBm
Transmit power
Programmable from firmware
Sensitivity
PER = 1% PER, 20byte packet
defined by IEEE 802.15.4 Boost
mode
-100
dBm
Adjacent channel rejection +/-5 MHz
IEEE 802.15.4 compliance at -82
dBm
35/35
dB
Adjacent channel rejection +/-10 MHz
IEEE 802.15.4 compliance at -82
dBm
40/40
dB
Copyright Š 2015 Computime Liimited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Mo
odule CTLA357/CTLB357
Parameter
Condition / Note
Min
Supply voltage
Typ.
2.1
Current consumption,
RX mode
Current
consumption,
TX mode
Max
Unit
3.6
Max RX sensitivity (normal mode)
28
mA
Max RX sensitivity (boost mode)
30
mA
CTLA357, CTLB
B357
150
CTLA357
2.8
CTLB357
mA
uA
Deep sleep current
Flash Memory
CTLA357, CTLB
B357
FLASH memory in EM357
CTLB357
RAM
12
uA
192
KB
Off chip Serial FLASH
Mb
Internal RAM in EM357
12
KB
24
MHz
32.768
KHz
MCU clock frequency
MCU Low Speed Clock
7. Typical application bloc
ck
HOST
MCU
VDD_PADS=2.1- 3.6V
NREST
PTI_EN
PTI-DA
ATA
Debug and
SIF_C
CLK
programming
SIF-M
MISO
interface
SIF-M
MOSI
CTLA/B357
RF Module

N+]&/ S)
NSIF_L
LOAD
SDB
BG
LINK_ACTIVITY
Figure 1: Example of application circuit
Copyright Š 2015 Computime Liimited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Mo
odule CTLA357/CTLB357
8. Pin Assignment
Figure
2: CTLA357/CTLB357 pin assignme
ent
Copyright Š 2015 Computime Liimited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Mo
odule CTLA357/CTLB357
9. Pin Description
Pin#
CTLA357
CTLB357
Direction
Description
JTCK
JTCK
JTAG clock input from debugger
SWCLK
SWCLK
I/O
Serial Wire Clock input/output with
w debugger
PC2
PC2
I/O
Digital I/O Enable with GPIO_D
DBGCFG[5]
JTDO
JTDO
JTAG data out to debugger
SWO
SWO
Serial Wire Output
output to debugger
PC3
PC3
I/O
Digital I/O Enable with GPIO_D
DBGCFG[5]
JTDI
JTDI
PC4
PC4
I/O
JTMS
JTMS
SWDIO
SWDIO
I/O
PC0
PC0
I/O High
current
JRST
JRST
JTAG reset input from debugge
er
IRQD
IRQD
Default external interrupt sourcce D
TRACEDATA1
TRACEDATA1
Synchronous CPU trace data bit
b 1
PB7
PB7
I/OHigh current
ADC2
ADC2
Analog
IRQC
IRQC
Default external interrupt sourcce C
TIM1C2
TIM1C2
Timer 1 channel 2 output
TIM1C2
TIM1C2
Timer 1 channel 2 input
PB6
PB6
I/O High
current
Digital I/O
ADC1
ADC1
Analog
ADC input 1
IRQB
IRQB
External interrupt source B
TIM1C1
TIM1C1
Timer 1 channel 1 output
TIM1C1
TIM1C1
Timer 1 channel 1 input
asynch
hronous
trace
JTAG data in from debugger
Digital
I/O
Either
GPIO_DBGCFG[5]
Enable
with
JTAG mode select from debug
gger
Serial Wire
debugger
bidirectional
Digital
I/O
Either
GPIO_DBGCFG[5]
data
Enable
to/from
with
Copyright Š 2015 Computime Liimited. All rights reserved.
Digital I/O
ADC input 2
Rev. 1
ZigBee- Ready RF Transceiver Mo
odule CTLA357/CTLB357
Pin#
CTLA357
CTLB357
Direction
Description
PA7
PA7
I/O High current
Digital
I/O
Disable
GPIO_DBGCFG [4]
RE
EG_EN
TIM1C4
TIM1C4
Timer 1 channel 4 output
TIM1C4
TIM1C4
Timer 1 channel 4 input
REG_EN
REG_EN
External regulator open drain output
PC1
PC1
RX Enable: High
10
GND
GND
PB3
PB3
I/O
Digital I/O
TIM2C3
TIM2C3
Timer 2 channel 3 output
TIM2C3
TIM2C3
Timer 2 channel 3 input
SC1nCTS
SC1nCTS
UART CTS handshake of Seria
al Controller 1
SC1SCLK
SC1SCLK
SPI master clock of serial Controller 1
SC1SCLK
SC1SCLK
SPI slave clock of serial Contro
oller 1
GND
GND
PC6
PC6
with
RX Disab
ble: Low
11
12
13
I/O
Digital I/O
I/O
32.768KHz crystal oscillator. If this pin is
used for oscillation, then cann
not be use for
other purposes, such as generral I/O port.
NTX_ACTIVE
NTX_ACTIVE
Inverted TX_ACTIVE signal
PC7
PC7
I/O
Digital I/O
I/O
32.768KHz crystal oscillator. If this pin is
used for oscillation, then cann
not be use for
other purposes, such as generral I/O port.
14
OSC32_EXT
OSC32_EXT
15
GND
GND
16
VDD_PADS
VDD_PADS
Power
17
nRESET
nRESET
Copyright Š 2015 Computime Liimited. All rights reserved.
Digital 32.768KHz clock input source
Pads supply(2.1-3.6V)
Active low chip reset(internal pull-up)
Rev. 1
ZigBee- Ready RF Transceiver Mo
odule CTLA357/CTLB357
Pin#
18
CTLA357
CTLB357
Direction
Description
PA0
PA0
I/O
Digital I/O
TIM2C1
TIM2C1
Timer 2 channel 1 output
TIM2C1
TIM2C1
Timer 2 channel 1 input
SC2MOSI
SC2MOSI
SPI master data out of serial controller
SC2MOSI
SC2MOSI
SPI slave data in of serial conttroller 2
SI
Serial data in for off-chip 8Mb flash. It
connected to AT25DF081A.So it cannot be
used for other purposes.
PA1
PA1
I/O
Digital I/O
TIM2C3
TIM2C3
Timer 2 channel 3 output
TIM2C3
TIM2C3
Timer 2 channel 3 input
SC2SDA
SC2SDA
I/O
TWI data of serial controller 2
SC2MISO
SC2MISO
SPI slave data out of serial con
ntroller 2
SC2MISO
SC2MISO
SPI master data in of serial controller 2
SO
Serial data out for off-chip 8Mb flash. It
connected to AT25DF081A.So it cannot be
used for other purposes.
PA2
PA2
I/O
Digital I/O
TIM2C4
TIM2C4
Timer 2 channel 4 output
TIM2C4
TIM2C4
Timer 2 channel 4 input
SC2SCL
SC2SCL
I/O
TWI clock of serial controller 2
SC2SCLK
SC2SCLK
SPI master clock of serial conttroller 2
SC2SCLK
SC2SCLK
SPI slave clock of serial contro
oller 2
SCK
Clock in for 8Mb flash. It connected to
AT25DF081A.So it cannot be used for other
purposes.
PA6
PA6
I/O High current
TIM1C3
TIM1C3
Timer 1 channel 3 output
TIM1C3
TIM1C3
Timer 1 channel 3 input
19
20
21
Copyright Š 2015 Computime Liimited. All rights reserved.
Digital I/O
Rev. 1
ZigBee- Ready RF Transceiver Mo
odule CTLA357/CTLB357
Pin#
22
23
CTLA357
CTLB357
Direction
Description
PB4
PB4
I/O
Digital I/O
TIM2C4
TIM2C4
Timer 2 channel 4 output
TIM2C4
TIM2C4
Timer 2 channel 4 input
SC1nRTS
SC1nRTS
UART RTS handshake of seria
al controller 1
SC1nSSEL
SC1nSSEL
SPI slave select of serial contrroller 1
PA3
PA3
I/O
SC2Nssel
SC2Nssel
SPI slave select of serial contrroller 2
TRACECLK
TRACECLK
Synchronous CPU trace clock
TIM2C2
TIM2C2
Timer 2 channel 2 output
TIM2C2
TIM2C2
Timer 2 channel 2 input
CE#
Chip Enable of 8Mb falsh. It co
onnected to
AT25DF081A.So it cannot be used
for other
purposes, such as general I/O port.
PA4
PA4
I/O
ADC4
ADC4
Analog
PTI_EN
PTI_EN
Frame signal of packet trace in
nterface
TRACEDATA2
TRACEDATA2
Synchronous CPU trace data bit
b 2
PA5
PA5
I/O
Digital I/O
ADC5
ADC5
Analog
PTI_DATA
PTI_DATA
Data signal of packet trace inte
erface
NBOOTMODE
NBOOTMODE
Embedded serial bootloader activation
out of
reset
TRACEDATA3
TRACEDATA3
Synchronous CPU trace data bit
b 3
PB1
PB1
I/O
Digital I/O
SC1MISO
SC1MISO
SPI slave data out of serial con
ntroller 1
SC1MOSI
SC1MOSI
SPI master data out of serial controller
SC1SDA
SC1SDA
I/O
TWI data of serial controller 1
SC1TXD
SC1TXD
UART transmit data of serial co
ontroller 1
TIM2C1
TIM2C1
Timer 2 channel 1 output
TIM2C1
TIM2C1
Timer 2 channel 1 input
Digital I/O
Digital I/O
ADC input 4
24
25
26
Copyright Š 2015 Computime Liimited. All rights reserved.
ADC input 5
Rev. 1
ZigBee- Ready RF Transceiver Mo
odule CTLA357/CTLB357
Pin#
27
CTLA357
CTLB357
Direction
Description
PB2
PB2
I/O
SC1MISO
SC1MISO
SPI master data in of serial con
ntroller 1
SC1MOSI
SC1MOSI
SPI slave data in of serial controller 1
SC1SCL
SC1SCL
I/O
SC1RXD
SC1RXD
UART receive data of serial co
ontroller 1
TIM2C2
TIM2C2
Timer 2 channel 2 output
TIM2C2
TIM2C2
Timer 2 channel 2 input
PB5
PB5
I/O
ADC0
ADC0
Analog
TIM2CLK
TIM2CLK
Timer 2 external clock input
TIM1CLK
TIM1CLK
Timer 1 external clock mask input
PB0
PB0
I/O
VREF
VREF
Analog O
ADC reference output
VREF
VREF
Analog I
ADC reference input
IRQA
IRQA
External interrupt source A
TRACECLK
TRACECLK
Synchronous CPU trace clock
TIM1CLK
TIM1CLK
Timer 1 external clock input
TIM2MSK
TIM2MSK
Timer 2 external clock mask input
Digital I/O
TWI clock of serial controller 1
Digital I/O
ADC input 0
28
29
Copyright Š 2015 Computime Liimited. All rights reserved.
Digital I/O
Rev. 1
ZigBee- Ready RF Transceiver Mo
odule CTLA357/CTLB357
10. Block Diagram
2.1 – 3.6V
PCB
antenna
32 Bit ARM
Processor
24MHz
User
Ap
pplication
UART/SPI/I2C
Communication
FEM
TM
Ziigbee
Network
IEEE 802.15.4
RF Transceiver
IEEE
E 802.15.4
MAC
Figure 3: CTLA357 Block Diagram
2.1 – 3.6V
32 Bit ARM
Processor
User
Ap
pplication
UART/SPI/I2C
Communication
8Mb flash
PCB
antenna
24MHz
FEM
TM
Ziigbee
Network
IEEE 802.15.4
RF Transceiver
IEEE
E 802.15.4
MAC
Figure 4: CTLB357 Block Diagram
Copyright Š 2015 Computime Liimited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Mo
odule CTLA357/CTLB357
11. RF Frequency Detail
The following table shows the RF
R channels as defined by the IEEE 802.15.4
4 standard.
R channel
RF
Frequency
11
2405MHz
12
2410MHz
13
2415MHz
14
2420MHz
15
2425MHz
16
2430MHz
17
2435MHz
18
2440MHz
19
2445MHz
20
2450MHz
21
2455MHz
22
2460MHz
23
2465MHz
24
2470MHz
25
2475MHz
26
2480MHz
for
Note: The output power of CTLA357/CTLB357
should be configured lower than -3.5dBm
-24dBm for
2480M channel to Comply FC
CC requirement.
The use of RF frequencies and
d maximum allowed RF power should accorrding to different national
regulations. The CTLA357/CT
TLB357 are complying with the applicable regulations
for the world
wide 2.4GHz ISM band.
The following table is the setting for the CTLA357/CTLB357 to US market:
Channel
Freq(MHz)
Ember setting
FCC
CH11~25
2405~2475
+18+/-1dBm
-4dBm +Non boost
Copyright Š 2015 Computime Liimited. All rights reserved.
CH26
2480
-3+/-1dBm
-24
4dBm ( base on FCC
te
est result to adjust )
Rev. 1
ZigBee- Ready RF Transceiver Mo
odule CTLA357/CTLB357
12. PCB Layout Recommen
ndations
Please reference Mechanical Dimensions
shown in next section for PCB layyout.
The area underneath the modu
ule should be covered with solder mask in ord
der to prevent short
circuit on the test pads on the back
side of the module. A solid ground plane
e under the module is
preferred.
As the module integrated with onboard
PCB trace antenna, the mounting po
osition of the module will
have great impact on the RF pe
erformance. There should not be any trace, ground
plane or metal
part underneath or nearby the area
of the onboard PCB trace antenna. The figure below shows an
example how the module positiioned on the mother PCB.
Figure 4: A reco
ommended placement of the module on a main PCB
Copyright Š 2015 Computime Liimited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Mo
odule CTLA357/CTLB357
13. Mechanical Dimensions

Pin 1
Pin 11
Figure 5: Mechanical
Dimensions of CTLA357/CTLB
B357
For further details on the So
oC transceiver (Ember EM357), please co
onsult the data sheet at
http://www.silabs.com/productss/wireless/zigbee/Pages/default.aspx
Copyright Š 2015 Computime Liimited. All rights reserved.
Rev. 1
ZigBee- Ready RF Transceiver Mo
odule CTLA357/CTLB357
Con
ntact information
COMPUTIME LIMITED
9/F Tow
wer One, Lippo Centre,
89 Queensway,
Hong Kong
Tel: +852.2260.0300
Fax: +852.2790.3996
e-mail: hq@computime.com
About Computime
Founded in 1974, Computim
me is a global technology, brand and man
nufacturing company
providing innovative automattion and control solutions to customers in
n commercial, industrial
and consumer markets.
The Company provides technologies and products that save energy and
a make people's
lives more productive and co
omfortable.
Copyright Š 2015 Computime Liimited. All rights reserved.
Rev. 1
FCC Statement 
Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmful
interference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
NOTE:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.
Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,
usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouragedtotrytocorrecttheinterferencebyoneormoreofthefollowing
measures:
Reorientorrelocatethereceivingantenna.
Increasetheseparationbetweentheequipmentandreceiver.
Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.
Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
FCCRadiationExposureStatement  
Themodularcanbeinstalledorintegratedinmobileorfixdevicesonly.Thismodularcannotbeinstalledinanyportabledevice,forexample,
USBdongleliketransmittersisforbidden.
ThismodularcomplieswithFCCRFradiationexposurelimitssetforthforanuncontrolledenvironment.Thistransmittermustnotbecolocated
oroperatinginconjunctionwithanyotherantennaortransmitter.Thismodularmustbeinstalledandoperatedwithaminimumdistanceof20
cmbetweentheradiatoranduserbody.
IftheFCCidentificationnumberisnotvisiblewhenthemoduleisinstalledinsideanotherdevice,thentheoutsideofthedeviceintowhichthe
module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following:
“ContainsTransmitterModuleFCCID:2AAUQCTLB357OrContainsFCCID:2AAUQCTLB357 ā
whenthemoduleisinstalledinsideanotherdevice,theusermanualofthisdevicemustcontainbelowwarningstatements;
1.ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:
(1)Thisdevicemaynotcauseharmfulinterference.
(2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
Thedevicesmustbeinstalledandusedinstrictaccordancewiththemanufacturer'sinstructionsasdescribedintheuserdocumentationthat
comeswiththeproduct

IC STATEMENT
ThisdevicecomplieswithIndustryCanada’slicenceexemptRSSs.Operationissubjecttothefollowingtwoconditions: 
(1)Thisdevicemaynotcauseinterference;and 
(2)Thisdevicemustacceptanyinterference,includinginterferencethatmaycauseundesiredoperationofthedevice. 
CetappareilestconformeauxCNRexemptesdelicenced'IndustrieCanada.Sonfonctionnementestsoumisauxdeuxconditionssuivantes:
(1)Cedispositifnepeutcauserd'interfĂŠrences;et
(2)CedispositifdoitacceptertouteinterfĂŠrence,ycomprislesinterfĂŠrencesquipeuventcauserunmauvaisfonctionnementdel'appareil.

ICRadiationExposureStatement  
Themodularcanbeinstalledorintegratedinmobileorfixdevicesonly.Thismodularcannotbeinstalledinanyportabledevice,forexample,
USBdongleliketransmittersisforbidden.
ThismodularcomplieswithICRFradiationexposurelimitssetforthforanuncontrolledenvironment.Thistransmittermustnotbecolocated
oroperatinginconjunctionwithanyotherantennaortransmitter.Thismodularmustbeinstalledandoperatedwithaminimumdistanceof20
cmbetweentheradiatoranduserbody.CettemodulairedoitĂŞtreinstallĂŠetutilisĂŠĂ unedistanceminimumde20cmentreleradiateuretle
corpsdel'utilisateur.
If the IC number is not visible when the module is installed inside another device, then the outside of the device into which the module is
installedmustalsodisplayalabelreferringtotheenclosedmodule.Thisexteriorlabelcanusewordingsuchasthefollowing: 
“ContainsIC:1700DCTLB357ā
whenthemoduleisinstalledinsideanotherdevice,theusermanualofthisdevicemustcontainbelowwarningstatements;
1.ThisdevicecomplieswithIndustryCanada’slicenceexemptRSSs.Operationissubjecttothefollowingtwoconditions: 
(1)Thisdevicemaynotcauseinterference;and 
(2)Thisdevicemustacceptanyinterference,includinginterferencethatmaycauseundesiredoperationofthedevice.
2.CetappareilestconformeauxCNRexemptesdelicenced'IndustrieCanada.Sonfonctionnementestsoumisauxdeuxconditionssuivantes:
(1)Cedispositifnepeutcauserd'interfĂŠrences;et
(2)CedispositifdoitacceptertouteinterfĂŠrence,ycomprislesinterfĂŠrencesquipeuventcauserunmauvaisfonctionnementdel'appareil.
Thedevicesmustbeinstalledandusedinstrictaccordancewiththemanufacturer'sinstructionsasdescribedintheuserdocumentationthat
comeswiththeproduct


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : rnd-hardyfung
Create Date                     : 2015:10:10 16:32:02+08:00
Modify Date                     : 2015:10:10 16:32:02+08:00
Subject                         : 
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PDFCreator Version 1.2.3
Metadata Date                   : 2015:10:10 16:30:42+08:00
Format                          : application/pdf
Description                     : 
Creator                         : rnd-hardyfung
Title                           : CTLA357_CTLB357 General Product specifications R1
Keywords                        : 
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:ce2b2979-7906-4faf-b1f0-3a505f09cb4d
Instance ID                     : uuid:1c9d79ea-bc36-4bc8-9b0d-81407bb0559c
Page Count                      : 19
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AAUQ-CTLB357

Navigation menu