Comtrend WAP-5940 Wireless Video Bridge User Manual CT 5374

Download:
Mirror Download [FCC.gov]
Document ID	3304496
Application ID	+Klt5cofIqCj86FqPc7KbA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	151.69kB (1896065 bits)
Date Submitted	2017-03-04 00:00:00
Date Available	2017-03-04 00:00:00
Creation Date	2017-03-01 11:11:56
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-03-01 11:13:17
Document Title	CT-5374
Document Creator	Acrobat PDFMaker 15 Word 版
Document Author:	Technical Writer

WAP-5940
Wireless Video Bridge
User Manual
261097-022
Version A1.1, November 1, 2016
Preface
This manual provides information related to the installation and operation of this
device. The individual reading this manual is presumed to have a basic
understanding of telecommunications terminology and concepts.
If you find the product to be inoperable or malfunctioning, please contact technical
support for immediate service by email at INT-support@comtrend.com
For product update, new product release, manual revision, or software upgrades,
please visit our website at http://www.comtrend.com
Important Safety Instructions
With reference to unpacking, installation, use, and maintenance of your electronic
device, the following basic guidelines are recommended:
•
•
•
•
•
•
Do not use or install this product near water, to avoid fire or shock hazard. For
example, near a bathtub, kitchen sink or laundry tub, or near a swimming pool.
Also, do not expose the equipment to rain or damp areas (e.g. a wet basement).
Do not connect the power supply cord on elevated surfaces. Allow it to lie freely.
There should be no obstructions in its path and no heavy items should be placed
on the cord. In addition, do not walk on, step on, or mistreat the cord.
Use only the power cord and adapter that are shipped with this device.
To safeguard the equipment against overheating, make sure that all openings in
the unit that offer exposure to air are not blocked.
Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lightening. Also, do not use
the telephone to report a gas leak in the vicinity of the leak.
Never install telephone wiring during stormy weather conditions.
CAUTION:

To reduce the risk of fire, use only No. 26 AWG or larger
telecommunication line cord.

Always disconnect all telephone lines from the wall outlet before servicing
or disassembling this equipment.
WARNING

Disconnect the power line from the device before servicing.

Power supply specifications are clearly stated in Appendix A Specifications.
Copyright
Copyright©2016 Comtrend Corporation. All rights reserved. The information
contained herein is proprietary to Comtrend Corporation. No part of this document
may be translated, transcribed, reproduced, in any form, or by any means without
prior written consent of Comtrend Corporation.
This program is free software: you can redistribute it and/or modify it under the
terms of the GNU General Public License as published by the Free Software
Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
details.
You should have received a copy of the GNU General Public License
along with this program. If not, see http://www.gnu.org/licenses/
NOTE: This document is subject to change without notice.
This program is free software: you can redistribute it and/or modify it
under the terms of the GNU General Public Li
Protect Our Environment
This symbol indicates that when the equipment has reached the end of
its useful life, it must be taken to a recycling centre and processed
separate from domestic waste.
The cardboard box, the plastic contained in the packaging, and the parts that make
up this router can be recycled in accordance with regionally established regulations.
Never dispose of this electronic equipment along with your household waste; you
may be subject to penalties or sanctions under the law. Instead, please be
responsible and ask for disposal instructions from your local government.
Table of Contents
CHAPTER 1 INTRODUCTION ........................................................................................................... 4
CHAPTER 2 INSTALLATION............................................................................................................. 5
2.1 HARDWARE SETUP ........................................................................................................................... 5
2.2 LED INDICATORS............................................................................................................................. 7
2.3 INITIAL DEVICE SETUP .................................................................................................................... 8
CHAPTER 3 WEB USER INTERFACE............................................................................................ 10
3.1 DEFAULT SETTINGS ....................................................................................................................... 10
3.2 IP CONFIGURATION ........................................................................................................................ 11
3.3 LOGIN PROCEDURE........................................................................................................................ 12
CHAPTER 4 STATUS.......................................................................................................................... 14
4.1 STATUS - DEVICE ........................................................................................................................... 14
4.2
STATUS – WIRELESS ................................................................................................................ 16
4.2.1 AP Mode ................................................................................................................................ 16
4.2.2 STA Mode............................................................................................................................... 19
4.3 STATUS – NETWORKING................................................................................................................. 22
4.4 STATUS – WDS .............................................................................................................................. 24
4.5 STATUS – MBSS ............................................................................................................................ 25
CHAPTER 5 CONFIG......................................................................................................................... 27
5.1 CONFIG – WIRELESS ...................................................................................................................... 27
5.2 CONFIG – WPS .............................................................................................................................. 32
5.3 CONFIG – MAC FILTER ................................................................................................................. 34
5.4 CONFIG – NETWORKING ................................................................................................................ 36
5.5 CONFIG – WDS ............................................................................................................................. 39
5.6 CONFIG – MBSS............................................................................................................................ 41
5.7 CONFIG – ACS ............................................................................................................................... 42
CHAPTER 6 TOOLS ........................................................................................................................... 46
6.1 TOOLS – LOG ................................................................................................................................. 46
6.2 TOOLS – ADMIN ............................................................................................................................. 49
6.3 TOOLS – RESTORE ......................................................................................................................... 50
CHAPTER 7 SYSTEM ........................................................................................................................ 51
7.1 SYSTEM – UPGRADE ...................................................................................................................... 51
7.2 SYSTEM – REBOOT ........................................................................................................................ 53
APPENDIX A - SPECIFICATIONS ................................................................................................... 54
APPENDIX B - AP / STATION ........................................................................................................... 55
Chapter 1 Introduction
The WAP-5940 is an 802.11ac 4T4R wireless video bridge, with two Giga Ethernet
ports. WAP-5940 performs AP to transmission package TCP/UDP to client, also
supporting station mode, receiving packets and forwarding to the Ethernet port.
WAP-5940 has a high power wireless design which supports 802.11ac 5Ghz band
4T4R and is backward compatible 802.11n, 802.11a.
Chapter 2 Installation
2.1 Hardware Setup
Follow the instructions below to complete the hardware setup.
BACK PANEL
The figure below shows the back panel of the device.
Power ON
Press the power button to the OFF position (OUT). Connect the power adapter to the
power port. Attach the power adapter to a wall outlet or other AC source. Press the
power button to the ON position (IN). If the Power LED displays as expected then
the device is ready for setup (see section 2.2 LED Indicators).
Caution 1: If the device fails to power up, or it malfunctions, first verify that the
power cords are connected securely and then power it on again. If the
problem persists, contact technical support.
Caution 2: Before servicing or disassembling this equipment, disconnect all power
cords and telephone lines from their outlets.
Ethernet (LAN) Ports
Use 1000-BASE-T RJ-45 cables to connect two network devices to a Gigabit LAN, or
10/100BASE-T RJ-45 cables for standard network usage. These ports are
auto-sensing MDI/X; so either straight-through or crossover cable can be used.
Reset Button
To reboot the device press the Reset button for 1-5 seconds. Restore the default
parameters of the device by pressing the Reset button for more than 5 seconds.
After the device has rebooted successfully, the front panel should display as
expected (see section 2.2 LED Indicators for details).
WPS Button
Press and release the WPS button to start the WPS connection process with the
other device. The connection duration is 2 minutes during which the WPS LED will
blink. If there is no client connection the WPS led will turn off. If connection is
successful the WPS LED will stay on.
AP/Station Switch
Select the desired option.
2.2 LED Indicators
The front panel LED indicators are shown below and explained in the following table.
This information can be used to check the status of the device and its connections.
LED
Color
POWER
GREEN
ETH1
GREEN
Mode
On
Power on
Off
Power off
On
Ethernet connected
Off
Ethernet not connected
Blink
ETH2
GREEN
WPS
GREEN
GREEN
Ethernet connected
Off
Ethernet not connected
Station
GREEN
GREEN
Ethernet is transmitting/receiving
On
Wi-Fi enabled
Off
Wi-Fi disabled
Blink
When no client connected
On
WPS connection successful
Off
No WPS (5G) association process ongoing
Blink
AP
Ethernet is transmitting/receiving
On
Blink
WiFi
Description
WPS (5G) connection in progress
On
WAP-5940 working in AP mode
Off
WAP-5940 working in Station mode
On
WAP-5940 working in Station mode
Off
WAP-5940 working in AP mode
2.3 Initial Device Setup
Device Setup
1.
Setup the first Wireless Video Bridge by plugging in the power adapter and
press the Power Button to the ON position (IN). Set the Wireless Video
Bridge to AP Mode by sliding the AP/Station Switch to the up position.
2.
Connect the Wireless Video Bridge to a Network Device (Gateway, Router,
etc.) with an Ethernet (RJ-45) cable. You can use either Ethernet ports of the
Wireless Video Bridge to make this connection.
3.
After you select AP mode thus the Ethernet port (ETH1) will be WAN port,
another Ethernet port (ETH2) is LAN side.
4.
After you select station mode thus two Ethernet ports (ETH1, ETH2) are LAN
side.
Chapter 3 Web User Interface
This section describes how to access the device via the web user interface (WUI)
using an Internet browser such as Internet Explorer (version 6.0 and later).
3.1 Default Settings
The factory default settings of this device are summarized below.
•
•
•
•
LAN IP address AP: 10.0.0.2
LAN IP address STA: 10.0.0.10
LAN subnet mask: 255.255.255.0
Administrative access (username: root, password: 12345)
Caution: The LAN setting default is DHCP mode, if a device connects to the DHCP
network, the LAN IP will be changed by the DHCP server assigned.
Technical Note
During power on, the device initializes all settings to default values. It will then
read the configuration profile from the permanent storage section of flash memory.
The default attributes are overwritten when identical attributes with different values
are configured. The configuration profile in permanent storage can be created via
the web user interface or telnet user interface, or other management protocols.
The factory default configuration can be restored either by pushing the reset button
for more than ten seconds until the power indicates LED blinking or by clicking the
Restore Default Configuration option in the Restore Settings screen.
10
3.2 IP Configuration
STATIC IP MODE
In static IP mode, you assign IP settings to your PC manually.
Follow these steps to configure your PC IP address to use subnet 10.0.0.x.
NOTE:
The following procedure assumes you are running Windows. However,
the general steps involved are similar for most operating systems (OS).
Check your OS support documentation for further details.
STEP 1: From the Network Connections window, open Local Area Connection (You
may also access this screen by double-clicking the Local Area Connection
icon on your taskbar). Click the Properties button.
STEP 2: Select Internet Protocol (TCP/IP) and click the Properties button.
STEP 3: Change the IP address to the 10.0.0.x (10=0
25
The number of
number
client which are
connected to the
Virtual AP
26
Chapter 5 Config
5.1 Config
–
Wireless
This screen has two tab pages, “Basic” and “Advanced”.
Basic
Menu Item
Description
Options
Detail
Device Mode
AP or STA mode
Access Point
Device Acts as
Access Point
Station
Device Acts as
Station
27
ESSID
Channel
SSID of the AP
Available 5Ghz
Can be set to
This will be the
desired SSID
SSID of the
name
wireless network.
36-48, 149-165
5.150-5.250,
channels based on
5.725-5.850 GHz
region setting
are the supported
frequency ranges
PMF
Encryption
Protected
Sets the 802.11w /
Management
PMF capability.
Frames
Applies to AP
802.11 compliant
WPA2/AES
authentication and
encryption
NONE-OPEN
Disables encryption
(OPEN mode)
WPA2 + WPA
(Mixed mode)
WPA2/AES
Enterprise
WPA2 + WPA
Enterprise
Passphrase
The current
passphrase.
Applies to AP only.
Group Key
Group key renewal
Group key interval
This is the interval
interval(in sec)
interval for
needs to be
at which the group
enterprise security
between 0 and
key is renewed for
43200
clients associated
to this SSID
Advanced
28
Menu Item
Description
Options
Detail
Wireless Band
Frequency Band to
802.11a
802.11a 5 GHz
be used
operation
802.11an
802.11an 5 GHz
operation
802.11ac
802.11ac 5 GHz
operation
Bandwidth
Per the 802.11a or
20 MHz
20 MHz operation
40 MHz
40 MHz operation
80MHz
80 MHz operation
802.11an or
802.11ac
standard
Per the 802.11an
or 802.11ac
standard
Per the 802.11ac
29
standard
NSS
The maximum
Auto
number of spatial
streams
Tx Rate
Transmitted data
Not supported for
rate
802.11a standard
Auto or MCS0
Auto Rate Control,
~MCS76 for
MCS 0-76
802.11an
standard
Only Auto option
available for
802.11ac
standard when
NSS is set to Auto.
When NSS is not
set to Auto,
MCS0~MCS9
options are
available.
Priority
0~3
The priority is
used to
differentiate
traffic between
different
SSIDs
Beacon Interval
Set the interval of
How often the
the beacon
device sends a
Beacon. The
interval should be
between 25 and
5000. The default
value is 100.
DTIM Period
Delivery Traffic
The DTIM period
Indication
indicates how often
Message
clients serviced by
the access point
30
should check for
buffered data
awaiting pickup on
the access point.
The value should
between 1 and 15.
Short GI
Guard Intervals
Checked
The 802.11n draft
specifies two guard
intervals: 400ns
(short) and 800ns
(long).
The GI is 400ns.
VLAN
Virtual Lan for
1-4096
different interface
31
5.2 Config – WPS
Connect to without selecting an SSID and inputting a Passphrase.
Menu Item
Description
Options
Detail
WPS State
Set WPS states
Disabled
WPS disabled
Not configured
WPS enabled
User can remotely
change AP's
wireless
settings…SSID,
Encryption and
Passphrase for
example.
32
Configured
User needs to fill
certain parameters
to start WPS
connection
WPS PBC
WPS push button
Push button to start
WPS connection
WPS PIN
For Web UI pin
Character string
WPS pin mode
This will be the PIN
used for Web UI
WPS pin mode.
WPS AP PIN
Client must have
same PIN within 2
minutes. It is
recommended to
use the external
WPS push button on
the device.
33
5.3 Config – MAC Filter
This screen shows the MAC addresses filtering configurations that are used for the
AP.
Menu Item
Description
Wifi Interface
Real wireless device
Options
Detail
NONE
The AP can block a
name and MAC
Address in CPE
MAC Address
The device filter
Filtering
MAC address
selected station from
associating based on
its MAC (hardware
interface) address.
34
“NONE”= Disable MAC
address filtering.
White list mode
Accept a client
association request
unless the MAC
address for that client
has been blocked
Black list mode
Block a client
association request
unless the MAC
address for that client
has been authorized
MAC Address
Verify the MAC
Checks whether the
address
MAC address can be
validated
MAC Address
List the authorized
According to the MAC
List
or denied MAC
address filter
addresses
“Authorize if not
denied” filter lists the
denied MAC
addresses.
“Deny if not
authorized” filter lists
the authorized MAC
addresses.
35
5.4 Config – Networking
These screens show the networking configuration.
DHCP
36
Static IP
Menu Item
Description
Options
Detail
DHCP or Static
Set the network
DHCP
The device will try
IP
configuration to
to get its IP address
DHCP or Static IP
with DHCP from a
device like a router
Static IP
The device will use
the static IP
address
IP Address
The IP Address of
This can be
the system
changed from this
interface, by editing
this field.
If the device is
using DHCP, the IP
37
address is not
allowed to change.
CAUTION: After
selecting “Save”,
the IP Address will
change
IMMEDIATELY. The
Web UI must be
pointed at the new
address in order to
continue your Web
UI Session.
Netmask
Netmask of the IP
address
Ethernet MAC
This is the IEEE
The internal
Address
compliant MAC
network bridge
address of the
uses this MAC
Ethernet interface
address. This
cannot be changed.
Wireless MAC
This is the IEEE
The WLAN MAC
Address
compliant MAC
address. This
address of the
cannot be changed.
Wi-Fi interface.
BSSID
The current
this will be the
associated BSSID
SAME as the
of the Wi-Fi
Wireless MAC
system.
address.
38
5.5 Config – WDS
This screen shows the configuration of the WDS links.
This option is not available if the device is configured as a STA.
Menu Item
Description
Options
Detail
WDS checkbox
To determine if the
Checked
The WDS link will
WDS link is enabled
be stored to a file
after clicking the
Save Button
Not Checked
The WDS link will
be discarded after
clicking the Save
Button
MAC Address
48bit MAC address
39
The WDS peer MAC
address on the
opposite side
Passphrase
64 ASCII PSK
Wi-Fi devices can
see the SSID in
scan. Now the
passphrase string
is displayed as
"*******"
instead.
Empty
The WDS link does
not have security
VLAN
Virtual Lan for
1-4096
different interface
40
5.6 Config – MBSS
One can create multiple Basic Service Set Identifiers (BSSIDs) on a device initially
configured as an access point (AP). This capability is not available on a device
configured as a STA. The first step in creating an additional BSSID is to create the
wireless interface device for that BSSID.
41
Menu Item
Description
SSID
SSID of the MBSS
Options
Detail
This will be the SSID
of the wireless
network.
VLAN
Virtual Lan for different
1-4096
interface
Broadcast
Enabled or disabled
Checked
SSID will be broadcast
Unchecked
Wi-Fi devices can see
SSID broadcast
the SSID in scan
Priority
The priority is used to
differentiate traffic
between different
0 is highest
priority.
3 is lowest
priority.
SSIDs
PMF
Protected Management
Sets the 802.11w /
Frames
PMF capability. Applies
to AP
Encryption
802.11 compliant
NONE-OPEN
encryption
Disables encryption
(OPEN mode)
WPA2/AES
WPA2+WPA
(mixed mode)
Passphrase
The passphrase
applies to this MBSS
SSID
5.7 Config – ACS
WAN Management Protocol CWMP (TR-069) allows an Auto-Configuration Server
(ACS) to perform auto-configuration, provision, collection, and diagnostics to this
device. Select desired values and click SAVE to configure TR-069 options.
42
Menu Item
Description
Options
Enable
Enable TR-069
Select to enable
daemon connection
to ACS
Disable
Disable TR-069
Select to disable
daemon connection
to ACS
URL
IP address and port
the device uses to
connect to the ACS
Username
Username used to
authenticate on ACS
43
Detail
Password
Password used to
authenticate on ACS
Periodic Inform
Activate /
Unit is
Deactivate the info
second(s)
message to ACS
server
Interval
Periodic time
interval of sending
the info message
Connection
Request URL
The path for the
connection from the
ACS to the CPE. It is
recommended to
keep the default
setting.
Connection
Username used to
Request
authenticate an ACS
Username
making a
Connection Request
to the CPE
Connection
Password used to
Request
authenticate an ACS
Password
making a
Connection Request
to the CPE
STUN
Activate the TR-111
Select to enable
function
Deactivate the
Select to disable
TR-111 function
Server Address
IP address of device
used to connect to
the ACS which
support STUN
Server Port
Port of device used
to connect to the
44
ACS which support
STUN
Username
Username used to
authenticate on ACS
which support STUN
Password
Password used to
authenticate on ACS
which support STUN
Maximum Keep
The maximum
Unit is
Alive Period
connect duration to
second(s)
the ACS server
Minimum Keep
The minimum
Unit is
Alive Period
connect duration to
second(s)
the ACS server
45
Chapter 6 Tools
6.1 Tools – Log
This page has the ability to directly view the PHY statistics of the device.
Pressing the “Start” button will start a 10 second polling log. This data can be useful
to assist in debugging the system.
After selecting “Start”, the page will look similar to the image above. The logging will
stop after pressing the “Stop” button. If the IP address is changed or if the device is
shut off, this page will give an error message if logging was in progress. To recover
the session, please press the “Start” button again.
This interface takes data from an internal OS file, so intermittently; there may be
management messages that show up in this log.
46
Metric
Description
Comments
Tstamp
This is the system time of
the measurement taken
from the internal system
clock
RxPkts
This represents the
number of packets that
were successfully received
over 1 second intervals.
Each line represents 1
second of time.
RxGain
This is the higher receiver
The maximum value of
gain value that was
RxGain is 62
recorded on successfully
received packets during
this measurement
interval. If no packets
were received, this may be
an invalid number.
CRC
This is the number of CRC
If (CRC/Rx Packets) >
errors received over the 1
10-20%, then the channel
second measurement
condition or link quality is
interval
poor. This is possibly due to
interference, another Wi-Fi
network or being too far for
the current configuration to
be reliable.
Noise
This is the MAX receiver
This value is an internal
noise floor as measured
noise calculation, not
over this 1 second interval
external. In normal
operation it will vary
between 20 and 70.
TxPkts
This is the number of
successfully transmitted
packets over the last 1
second interval.
47
Defers
This number counts the
Defers are common in busy
number of times an
WiFi environments
attempted transmission
was deferred due to the
medium being busy.
This is helpful in
determining if an
environment is very busy.
Tout
This is an indicator of Tx
Timeouts are not common.
packet timeout
The Packet could not find a
time slot to transmit.
Retries
This counts the number of
On the transmit side, note
transmission retries that
that the general packet flow
have occurred over the
for error is as follows:
last one second.
ShPre
This is primarily due to the
Defer
lack of acknowledgements
Retry
from the partner device.
Timeout
This counts the number of
These are very common in
Short Preamble Detection
high throughput conditions
Errors
LgPre
This counts the number of
The wireless received a
Long Preamble Detection
signal which passed the
errors
short preamble, but failed
the more complex long
preamble. These are less
common than short
preamble errors.
Rate
This is a legacy
measurement for rate and
is not currently used
48
6.2 Tools – Admin
This page is for administration of the user passwords.
Menu Item
Description
Notes
User Name
The user name for login
Only for the login privilege
Old Passphrase
Enter the original password
of the user name
New Passphrase
Enter the new passphrase
New Passphrase
Enter the new passphrase
It should be the same as the
Again
again
“New Passphrase”
49
6.3 Tools – Restore
The Tools Restore page is for users to restore all the configurations of the device to
factory defaults. There is also the option to restore the configuration files and reboot
whilst retaining the IP settings.
The Restore function also restores the password of the login user.
50
Chapter 7 System
7.1 System – Upgrade
The System Upgrade page is for users to update the firmware on the device.
This page will upload a binary image file. Please use bin file to upgrade which is
named like “WAP-5940-EM51-3671361CTU-CXX_RXX.bin”.
When you select the file and click “Upgrade”, the “Upgrade” button will be disabled
and the page will display “Loading the image file......Please wait”, please wait for 2
minutes. Please be patient and do not power off the unit during this process.
Do not close the upgrade webpage.
51
When the firmware has been upgraded successfully, you will be automatically
directed to the reboot page.
52
7.2 System – Reboot
The System Reboot page is for users to reboot the device.
53
Appendix A - Specifications
Hardware Interface
•
•
•
•
•
•
•
AP/Station Switch x 1
RJ-45 X 2 for Giga Ethernet port
Reset Button X 1
WPS button X 1
4x internal MIMO antenna
Power switch X 1
Power Jack X 1
Standard
•
•
•
•
•
•
•
•
•
802.11a/n/ac
802.11i (WEP, WPA/WPA2, RADIUS)
802.11d
802.11e (WMM, WMM-PS)
802.11w
802.11h
802.11k
802.11r
802.11s (Draft)
Rates are for 256 QAM
•
•
•
80MHz: 1.7Gbps
40MHz: 800Mbps
20MHz: 346.8Mbps
Environment Condition
Operating temperature .....................................0 ~ 40 degrees Celsius
NOTE:
Specifications are subject to change without notice.
54
Appendix B - AP / Station
After you select AP mode thus the Ethernet port (ETH1) will be WAN port, another
Ethernet port (ETH2) is LAN side.
55
After you select station mode thus two Ethernet ports (ETH1, ETH2) are LAN side.
56
Warnings Guide
FCC Statements
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20 cm between the radiator
& your body.
ISED Statements
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following
two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
Cet appareil est conforme à la norme RSSs Industrie Canada exempts de licence norme(s). Son
fonctionnement est soumis aux deux conditions suivantes:
1. Cet appareil ne peut pas provoquer d’interférences et
2. Cet appareil doit accepter toute interférence, y compris les interferences qui peuvent causer un
mauvais fonctionnement du dispositif.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20 cm
between the radiator & your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de
distance entre la source de rayonnement et votre corps.
57
Users should also be advised that high-power radars are allocated as primary users (i.e. priority users)
of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference
and/or damage to LE-LAN devices.
Other Statements
This device and its antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems.
This device is restricted to indoor use.
58

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Technical Writer
Create Date                     : 2017:03:01 11:11:56+08:00
Document Number                 : 261099-002
ETH                             : 4
Keywords                        : Multi-DSL, WLAN, Router, CT-5374
Modify Date                     : 2017:03:01 11:13:17+08:00
Model Name                      : Multi-DSL WLAN Router
Subject                         : Multi-DSL WLAN Router
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Metadata Date                   : 2017:03:01 11:13:17+08:00
Creator Tool                    : Acrobat PDFMaker 15 Word 版
Document ID                     : uuid:517c614e-85d7-4223-9b74-0a072ff107b1
Instance ID                     : uuid:abb84708-294e-4dc1-88ca-becbc3b0d8cf
Format                          : application/pdf
Title                           : CT-5374
Description                     : Multi-DSL WLAN Router
Creator                         : Technical Writer
Producer                        : Adobe PDF Library 15.0
Source Modified                 : D:20170301030830
Company                         : Comtrend
Category                        : UM
Model                           : CT-5374
Version                         : A1.0
Document 0020number             : 261099-002
Model 0020 Name                 : Multi-DSL WLAN Router
PV Cs                           : 16
Eth 0023                        : 4
Headline                        : Multi-DSL WLAN Router
Page Layout                     : OneColumn
Page Count                      : 59

EXIF Metadata provided by EXIF.tools