Continental Automotive DHSNFC Door Handle Sensor NFC User Manual Manual of user
Continental Automotive GmbH Door Handle Sensor NFC Manual of user
Manual of user
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3440693 |
| Application ID | N/VjFOmJb5QN0X1PfWp3TQ== |
| Document Description | Manual of user |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 157.35kB (1966845 bits) |
| Date Submitted | 2017-06-27 00:00:00 |
| Date Available | 2017-12-24 00:00:00 |
| Creation Date | 2017-04-27 17:28:47 |
| Producing Software | Microsoft® Office Word 2007 |
| Document Lastmod | 2017-06-01 16:40:21 |
| Document Title | Manual of user |
| Document Creator | Microsoft® Office Word 2007 |
| Document Author: | TFIT02 |
AuD5 NFC : product overview – usage for homologation Purpose: Door Handle Sensor - Audi D5 NFC Scope: Product name Variant Continental Part number Audi Part number DHS Audi D5 NFC - L NFC Left A2C 114 793 4N1.927.753 DHS Audi D5 NFC - R NFC Right A2C 114 797 4N1.927.754 Door Handle Sensor Audi D5 NFC product overview – usage for homologation Version AA Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 1 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation Version History Item TBD (To be defined) or TBC (To be Confirmed) in blue color. Item Updates compared to previous revision in yellow color Document Change description (including ECM version number) AA First Version Date Date/ Status 26/04/2017 Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 2 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation Table of Contents: 1 General...................................................................................................................................... 5 1.1 Contact ............................................................................................................................... 5 1.2 Glossary .............................................................................................................................. 5 1.3 Validity and Track Changes ................................................................................................ 6 1.4 Type of Sensor .................................................................................................................... 6 1.5 Sensor Functions ................................................................................................................ 6 1.6 NFC Reader Principle .......................................................................................................... 7 1.7 Example of sensor use........................................................................................................ 7 2 System Architecture.................................................................................................................. 8 2.1 Alternative System Architectures ...................................................................................... 8 2.2 Dynamic Behaviors ............................................................................................................. 8 2.3 System Architecture ........................................................................................................... 9 2.4 Components ..................................................................................................................... 10 2.5 Materials .......................................................................................................................... 11 2.5.1.1 Storage Temperature Range ............................................................................... 11 2.5.1.2 Operating Temperature Range ........................................................................... 11 2.5.2 Assembly / Sealing ..................................................................................................... 11 2.5.2.1 Module Sealing ................................................................................................... 11 2.6 Connector requirements .................................................................................................. 11 2.6.1 Connector Reference ................................................................................................. 11 2.6.2 Connector Pinout ....................................................................................................... 12 2.7 Variants ............................................................................................................................ 13 2.7.1 Right/Left Variants..................................................................................................... 13 2.8 Electronics Structure and Interface ................................................................................. 14 2.8.1 Electronics Block Diagram ......................................................................................... 14 2.8.2 Operating Temperature Range .................................................................................. 14 2.8.3 Operating Voltage Range........................................................................................... 14 2.8.4 Peak Power Consumption ......................................................................................... 14 2.8.5 Sleep Power Consumption ........................................................................................ 16 2.8.6 Current Consumption ................................................................................................ 16 2.8.7 CAN Voltage Range .................................................................................................... 16 3 Misuse Protections ................................................................................................................. 17 4 Communication ....................................................................................................................... 18 4.1 CAN Communication Protocol ......................................................................................... 18 4.1.1 Lock Detection Message ............................................................................................ 18 4.1.2 Unlock Detection Messages ...................................................................................... 18 4.1.3 DHS Error Message .................................................................................................... 19 4.3 NFC Communication......................................................................................................... 20 4.3.1 NFC type .................................................................................................................... 20 Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 3 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation 4.3.2 Actuator test .............................................................................................................. 20 5 Detection area ........................................................................................................................ 22 5.1.1 Unlock Detection Area............................................................................................... 22 5.1.2 Lock Detection Area .................................................................................................. 22 5.1.3 NFC Detection Area .................................................................................................. 22 6 Homologation setup ............................................................................................................... 24 6.1 General Test conditions ................................................................................................... 24 6.2 Material provided by Continental .................................................................................... 24 6.3 DHS detection tracking..................................................................................................... 24 6.3.1 DHS connection instructions: .................................................................................... 25 6.3.2 Test box signals description: ..................................................................................... 28 6.3.3 Test box function: ...................................................................................................... 32 Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 4 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation 1 General 1.1 Contact Function Name Email Phone Project Leader Andreas Moser Andreas.moser@continental-corporation.com +33 5 61 19 80 81 System Engineer Stéphan Baudru Stephan.baudru@continental-corporation.com +33 5 61 19 74 02 Electronic Engineer Cyril Robin Cyril.robin @continental-corporation.com +33 5 61 19 53 41 Software Engineer Simon Forster Simon.forster@continental-corporation.com +33 5 61 19 33 87 Mechanical Engineer Paul Raison paul.raisson@continental-corporation.com +33 5 61 19 55 31 Quality Engineer Cindy Bardalou Cindy.bardalou@continental-corporation.com +33 5 62 23 15 05 1.2 Glossary D5/C8: DH: DHS: LF: RF: ECU: BCM: BCM2: Audi platforms names Door Handle (means Outside Door Handle) Door Handle Sensor Module (Unlock and Lock capacitive sensors) Low Frequency (125kHz signal for communication from ECU to Keyfob) Radio-Frequency (433 MHz signal for communication from Keyfob to ECU) Electronic Control Unit Body Controller Module Audi ECU name NFC : PCD : PICC : Near Field Communication Proximity Coupling Device (the Reader) Proximity Integrated Circuit Card (the Smartcard/the Smartphone) SE: ME: EE: System Engineering Mechanical Engineering Electrical Engineering HW: SW: HSI: ICT: Hardware Software Hardware Software Interface In Circuit Tester Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 5 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation EOL: End of Line (Tester) RT: DV: PV: EMC: Room Temperature Design Validation Product Validation Electro Magnetic Compatibility FMTT: FMDD: DGL: Flash Monitoring and Tuning Tool (Continental Development Tool) Continental Development Tool replacing the FMTT Design GuideLines 1.3 Validity and Track Changes Items or parameters values changed compared to previous revision are highlighted in yellow. Items or parameters values to be defined or to be confirmed are highlighted in blue. 1.4 Type of Sensor This sensor is a DHS. The DHS is a standalone module with capacitive and NFC unctions. This module is integrated into a DH, and used in Keyless Entry System, enabling 'key-free' Vehicle Unlocking and Locking. 1.5 Sensor Functions The DHS has 3 main functions : - Unlock Function : Capacitive detection with 2 detection ranges. - Lock Function : Capacitive detection with 2 detections ranges. - NFC Function : Read/Write function of NFC Smartcards/Smartphones. Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 6 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation 1.6 NFC Reader Principle The NFC principle is based on electromagnetic coupling between 2 devices at close distance (few cm). The PCD emits a electromagnetic field on a 13.56 Mhz carrier. It will power the PICC via Induction. The PCD can transmit data via Miller Coding and receive data back via Load modulation. 1.7 Example of sensor use Example of Vehicle Access Process (Unlocking): Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 7 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation As the user's hand approaches the capacitive sensor UNLOCK detection area, sensor communicates detection to BCM Module. Then, the corresponding LF antenna on front side is driven by system to send LF challenge to fob(s) to perform the user's identification process. The same principle is used to Lock the vehicle, with a capacitive sensor LOCK detection area. The NFC device tap is used to toggle the vehicle locking status. 2 System Architecture 2.1 Alternative System Architectures Major evaluation criteria for architecture solutions was robustness, proven in use and cost. Therefore the generic system architecture for Capa/NFC sensors proven in use in the generic project was chosen. 2.2 Dynamic Behaviors Dynamic behaviors, i.e. how the systems elements interact with each other dynamically, are mainly driven by the SW. Then, the timings and sequence charts are described in EE/SW Interface (HSI, IMS 161922) and SW Requirements (IMS 161715) Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 8 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation 2.3 System Architecture Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 9 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation 2.4 Components ID: 161948 State: Released The DHS module shall be composed of: a packaging: - plastic housing - plastic cover - potting material - foam pad on Lock Area (the function is to keep the water out of the zone) a connection module: - pressfit module - harness + splices - connector an electronic detection module: - PCB with electronic circuit (for detection technology) - Unlock Electrode (sensitive element) metal-stamping soldered on the PCB - Lock Electrode (sensitive element) and NFC antenna on Flex-PCB soldered on the PCB Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 10 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation 2.5 Materials 2.5.1.1 Storage Temperature Range ID: 161950 State: Released The Mechanical Design shall guarantee the sensor robustness over Temperature storage range: -40°C to +90°C. 2.5.1.2 Operating Temperature Range ID: 161951 State: Released The Mechanical Design shall guarantee the sensor robustness over Temperature operating range: -40°C to +70°C. 2.5.2 2.5.2.1 Assembly / Sealing Module Sealing ID: 161954 State: Released The DHS shall be sealed with PolyUrethane (PU) resin. The sealing process shall ensure absolute water tightness. 2.6 Connector requirements 2.6.1 Connector Reference ID: 161919 State: Released The connector is a directed part from Audi. Connector Designation: Tyco MCON 4 ways, Coding B color white Audi Reference: 4N0.973.704.A Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 11 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation The coding and pinout shall be identical for all variants (Left/Right). The pin coating shall be silver (Ag) 2.6.2 Connector Pinout ID: 161920 State: Released Pin number Pin Name Wire Color A1 Vbatt Grey A2 Gnd Black A3 CAN-H Blue A4 CAN-L Green Signal Description Kl30 - Power Supply Kl31 - Electrical Ground CAN -High CAN -Low Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 12 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation 2.7 Variants 2.7.1 Right/Left Variants ID: 161823 State: Released There shall be 2 mechanicals variants: 1 for Right Handle. 1 for Left Handle. These variants shall differ only by the: - housing & cover shape - Flex-PCB shape Left sensor: Right sensor: Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 13 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation 2.8 Electronics Structure and Interface 2.8.1 Electronics Block Diagram ID: 161781 State: Released The Electronics shall be compliant with the following Block Diagram. 2.8.2 Operating Temperature Range ID: 161782 State: Released The Electronic Design shall guaranty all electrical parameters over operating Temperature range -40°C to +70°C, unless otherwise stated. 2.8.3 Operating Voltage Range ID: 189713 State: Released The Electronic Design shall guaranty all electrical parameters over operating Voltage range UDH = 8V to 16V, unless otherwise stated. 2.8.4 Peak Power Consumption ID: 161784 State: Released The Electronic Design shall guarantee the following peak power consumption: Parameter IqpkOFF Description Min Typ Peak Quiescent Current Max 300 400 Date U. Comments µController Awake, mA NFC polling Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 14 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation CAN On Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 15 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation 2.8.5 Sleep Power Consumption ID: 161785 State: Released The Electronic Design shall guarantee the following power consumption in Sleep Mode: Parameter Description Iq_low Quiescent Current in Sleep Mode 2.8.6 Min Typ Max 67 U. Comments µController in Sleep Mode, No NFC polling µA No Capacitive Measurement CAN in Sleep Mode Current Consumption ID: 161866 Parameter IqOFF 2.8.7 State: Released Description Min Typ Max Average Dark current 200 300 TBC 500 TBC U. Comments Unlock Capacitive Polling @ 20 ms µA Lock Capacitive Polling @ 70 ms NFC Polling @ 100 ms CAN Voltage Range ID: 161783 State: Released The Electronic Design shall guaranty the CAN functionality (communication possible) over operating Voltage range UDH = 6V to 18V. In case voltage exceed 18V, CAN shall not be operational more than 1 minute. In case voltage exceed 26V, CAN shall stop immediatly the CAN communication. Overvoltage and undervoltage are manged by self check algorithm. Thresholds have tolerances up to 27.5V. See Requirement 171350 Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 16 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation 3 Misuse Protections After 20 lock/unlock activations in less than 10 seconds the sensor deactivates capa functions for 30s. After 20 NFC activations with wrong TAG in less than 10 seconds the sensor deactivates NFC function for 30s. Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 17 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation 4 Communication The DHS communicates detections ( lock/unlock/NFC) and status ( diagnosis) on CAN 4.1 CAN Communication Protocol ID: 161957 State: Released The DHS shall communicate with the BCM over a CAN High Speed network (500 kbits/s) 4.1.1 Lock Detection Message ID: 162063 State: Released If the DHS is in DETECTION or END_OF_DETECTION state on Lock, it shall set the following data on the CAN Output : If the DHS is in Prox range: Frame NFC_TGS_01 : KY_Schliessen_Annaeherung = 0x1 If the DHS is in Touch range: Frame NFC_TGS_01 : KY_Schliessen_Beteatigung = 0x1 Otherwise, these signals shall be set to 0x0. 4.1.2 Unlock Detection Messages ID: 162061 State: Released If the DHS is in DETECTION or END_OF_DETECTION state on Unlock, it shall set the following data on the CAN Output : If the DHS is in Prox range: Frame NFC_TGS_01 : KY_Oeffnen_Annaeherung = 0x1 If the DHS is in Touch range: Frame NFC_TGS_01 : KY_Oeffnen_Beteatigung =0x1 Otherwise, these signals shall be set to 0x0. Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 18 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation 4.1.3 DHS Error Message ID: 167002 State: Released If the DHS has detected any error, it shall pre-set the following data on the CAN Output. The Frame NFC_TGS_01 is sent when an active condition is set (AC) or wake up condition (WUC) is detected (if NM_NFC_TGS_NM_Activ_KL_15 (AC) set to 1 on or NM_NFC_TGS_NM_Activ_Diagnose (AC) set to 1 or NM_NFC_TGS_NM_activ_Auth (AC & WUC) set to 1 or NM_BCM2_Car_WakeUp (WUC) set to 1). Frame NFC_TGS_01 : NFC_TGS_Fehler = 0x0 - No error Frame NFC_TGS_01 : NFC_TGS_Fehler = 0x1 - DHS Internal error Frame NFC_TGS_01 : NFC_TGS_Fehler = 0x2 - Antenna error Frame NFC_TGS_01 : NFC_TGS_Fehler = 0x4 - Undervoltage Frame NFC_TGS_01 : NFC_TGS_Fehler = 0x8 - Overvoltage Frame NFC_TGS_01 : NFC_TGS_Fehler = 0x16 - Overheating Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 19 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation 4.3 NFC Communication 4.3.1 NFC type ID: 167097 State: Released The interface to smartphone / smartcard is defined according to ISO 14443A. Once a PICC has been detected, the DHS shall enter the NFC RF discovery mode. The DHS shall search for all allowed devices, and communicate with PICC type : NFC A Type 4. 4.3.2 Actuator test ID: 191483 State: Released When DHS receive the frame NFC_01 with signal Stellgliedtest_NFC set, the DHS shall perform the actuator test requirement as described below : 1. It shall turn on the antenna for at least p_t_tgs_actuator_test s and look for an external device with RF discovery polling rate as short as possible 2. If it finds an appropriate counterpart (NFC-A Type 4), it shall activate and send the SELECT command. 3. It shall feedback the result by changing the parameter "authenticated NFC-counterpart" The DHS Application shall execute the acutator test (when requested) at any time regardless of the Misuse or K15 State and ESM. It is required that the field is turned on during the complete duration of the actuator test. REQA is replaced by WUPA to ensure several communication possible whereas field is kept on. The DHS shall stop the actuator test if: Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 20 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation - receives the signal Stellgliedtest_NFC = 0 before the expiration of the timeout p_t_tgs_actuator_test - the timeout of p_t_tgs_actuator_test s expires Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 21 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation 5 Detection area 5.1.1 Unlock Detection Area ID: 161859 State: Released The Unlock detection area shall be limited to the designated area : 5.1.2 Lock Detection Area ID: 161860 State: Released The Lock detection area shall be limited to the designated area : 5.1.3 NFC Detection Area ID: 166779 State: Released The NFC detection area shall be limited to the designated area : Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 22 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 23 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation 6 Homologation setup 6.1 General Test conditions General test conditions valid for all tests : All materials within 100mm around the door handle sensor during the test process (includes Handle fixations - “Sensor fixture” / “Holder”, sockets, base plate, … -, actuation system –robot, arms, …-, tester mechanics, …) shall be made of non conductive material and as electrostatic neutral as possible (ie PEEK or PA66 GF30) in order to avoid influence on detection distance. Conductive environment (Robot, arms, jig walls, etc …) shall be at least 100mm away from Door Handle Assembly throughout the test sequence (except for Targets themselves). The connector positions, and then the bed-of-nails, shall be 100 mm away from the sensitive areas during the test. The DHS shall have its dedicated power supply. This power supply shall be a low noise linear power supply (switch mode power supplies are prohibited) No noise shall be visible by oscilloscope on DHS supply line. 6.2 Material provided by Continental 5 DHS Left number 84, 30,67,26,34 5 DHS right number 42, 13,9,15,48 Test box with usage described below Wires / connector Tag for NFC detection 6.3 DHS detection tracking In order to check DHS signal during homologation tests, a specific test box is provided by Continental. Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 24 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation 6.3.1 DHS connection instructions: Global overview when sensor is plugged to testbox: Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 25 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 26 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation Supply test box with 12V. Plug DHS Vbat and GND to corresponding Vbat and GND input on test box: Plug DHS CAN low and Can High to corresponding CAN low and Can High input on test box with color corresponding plugs: Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 27 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation 6.3.2 Test box signals description: LEDs are available to check visually if sensor is working. For each lead an output is available and can be connected directly to any recorder ( oscilloscope,…). High level means no detection, low level means detection. Below example with lock touch : L_Touch output is plugged to oscilloscope – GND also : Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 28 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 29 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation Unlock prox/touchdetection : touch hand in unlock area : Lock prox/touchdetection : touch hand in unlock area : Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 30 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation NFC detection : approach TAG against NFC area : message on test box = “SE-ID:OK” Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 31 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation Before to start any test, check for each LED and corresponding output that sensor is working fine: - touch lock area with thumb for at least 300 ms => check lock prox and lock touch function - touch unlock area with hand for at least 200 ms => check unlock prox and unlock touch function - approach TAG against NFC area => check NFC function 6.3.3 Test box function: To set the sensor in “normal mode”, as it is in vehicle configuration without communication with BCM, let the switch in position RF-OFF. To set the sensor in “RF Discovery mode”, set the switch in position RF-ON. The sensor will send continuous WUPA as described in chapter “actuator test”. To check no loss of detection Tag provided by continental shall lay against the DHS in front of NFC Area as describe in chapter”NFC detection area”. Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 32 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. AuD5 NFC : product overview – usage for homologation To exit the sensor from “RF Discovery mode”, set the switch in position RF-OFF. The sensor will exit from this mode to normal mode in about 1s. Date Department Designed by Released by Designation IMS ID SAP ID Document version as of Pages 161711 10 348616 April 27, 2017 33 of 33 Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. FCC Regulatory notices Modification statement Continental Automotive GmbH has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. Interference statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Wireless notice This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Class B digital device notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Language : fr-FR Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Format : application/pdf Creator : TFIT02 Create Date : 2017:04:27 17:28:47+02:00 Creator Tool : Microsoft® Office Word 2007 Modify Date : 2017:06:01 16:40:21+02:00 Metadata Date : 2017:06:01 16:40:21+02:00 Producer : Microsoft® Office Word 2007 Document ID : uuid:6889faa6-5cb6-4766-81d3-b24a0b410908 Instance ID : uuid:ee268476-9f90-49dc-a673-437cbd7e8193 Page Count : 34 Author : TFIT02EXIF Metadata provided by EXIF.tools