Continental Conair GH3100 Cordless Phone User Manual GH3150ib eng1

Continental Conair Limited Cordless Phone GH3150ib eng1

Users Manual

//2.4GHz CordlessTelephone with Call WaitingCaller ID and DigitalAnswering SystemGH3150 OWNER’ S MANUALToll-free Help Line 1-800-366-0937http://www.swbfreedomphone.com39Some states do not allow the exclusion or limitation of special, inci-dental, or consequential damages, so the above limitation or exclu-sion may not apply to you. This warranty gives you specific legalrights, and you may also have other rights which vary from state tostate.SOUTHWESTERN BELL FREEDOM PHONE7475 NORTH GLEN HARBOR BLVD., GLENDALE, AZ 85307STOP - DON’ T TAKE ME BACK TO STORE.LOOK - FOR THE TOLL-FREE “HELP” TELEPHONE NUMBER.LISTEN -AS THE EXPERTS TALK YOU THROUGH THE PROBLEM.For immediate answers to your questions regarding operation,missing parts or installation, call:Southwestern Bell Freedom Phone®Retails Sales Help Line at1-800-366-0937Monday- Friday 8:30a.m. - 9:00p.m.ESTSaturday 8:30a.m.- 12:30p.m. ESThttp://www.swbfreedomphone.comSOUTHWESTERN BELL FREEDOM PHONE7475N. GLEN HARBOR BLVD., GLENDALE, AZ 85307GH3150 Printed in China IB-5123
PLEASE READ IMPORTANT SAFETY INSTRUCTIONS BE-FORE USE.Congratulations! You have purchased a 2.4GHz Analog CordlessTelephone with Type II Call Waiting Caller ID and Digital Answer-ing System that has been manufactured to the highest standards ofSOUTHWESTERN BELL FREEDOM PHONE® Retail Sales.BEFORE INSTALLING AND OPERATING THIS TELEPHONE,IT IS VERY IMPORTANT THAT YOU READ THIS OWNER’ SMANUAL.IMPORTANT SAFETY INSTRUCTIONSBEFORE USING YOUR TELEPHONE EQUIPMENT, BASICSAFETYPRECAUTIONS SHOULD ALWAYS BE FOLLOWED TOREDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND IN-JURY TO PERSONS, INCLUDING THEFOLLOWING:1. Read and understand all instructions.2. Follow all warnings and instructions marked on the product.3. Unplug this product from the wall telephone jack and poweroutlet before cleaning. Do not use liquid or aerosol cleaners. Usea damp cloth for cleaning.4. Do not use this product near water, for example, near a bathtub,washbasin, kitchen sink, laundry tub, swimming pool, or in a wetbasement.5. Do not place this product on an unstable cart, stand or table. Theproduct may fall, causing serious damage.6. Slots or openings in the cabinet, back and bottom are providedfor ventilation, to protect equipment from overheating. Theseopenings must not be blocked or covered. Do not place theproduct on a bed, or other similar surface where the openingscould be blocked. Never place this product near or over aradiator or heat register.7. Operate this product using only the type of power sourceindicated on the marking label. If you are not sure of the type ofpower supply in your home, consult your dealer or local powercompany.8. Do not allow anything to rest on the power cord. Do not placethis product where it could be stepped on and damaged.9. Do not overload wall outlets and extension cords, as this can result in fire or electric shock.12
10. Never push objects of any kind into this product through cabinetslots, as they may touch dangerous voltage points or short circuitparts. This could result in fire or electric shock. Neverspill liquid of any kind on the product.11. To reduce the risk of electric shock, do not disassemble thisproduct. Instead, when service or repair work is required, take itto a qualified service technician. Opening or removing coversmay expose you to dangerous voltages or other risks. Incorrectreassembly can cause electric shock when the appliance issubsequently used.12. Unplug this product from the wall outlet and refer servicing toqualified service personnel under the following conditions:a. When the power supply cord or plug is damaged or frayed.b. If liquid has been spilled into the product.c. If the product has been exposed to rain or water.d. If the product has been dropped or the cabinet hasbeen damaged.e. If the product exhibits a distinct change in performance.If the product does not operate normally and proper operating instructions have been followed, adjust only thosecontrols that are covered by the operating instructions.Improper adjustment of other controls may result in damageand will often require extensive work by a qualifiedtechnician to restore the product to normal operation.13. Avoid using a telephone (other than a cordless type) during anelectrical storm.There may be a remote risk of electric shock from lightning.14. Do not use the telephone to report a gas leak if you are in thevicinity of the leak.15. Danger of explosion if battery is incorrectly replaced. Replacebattery pack only with the same or equivalent type recommendedby the manufacturer. Dispose of used batteries according to themanufacturer instructions.Safety Instructions for BatteriesHandset Battery PackCAUTION:Use only a Southwestern Bell Freedom Phone approved battery packin the handset of your GH3150 Analog Cordless Telephone. To re-duce the risk of fire or injury, always do the following when replac-ing, discarding or charging batteries.a. When handling the batteries, be careful not to short circuit thebattery with con ducting materials such as rings, bracelets, andkeys. The battery or conducting mate rial may overheat and causeburns.b. Use only the following type and size batteries in the cordlessphone:c. Self-contained 3-cell Nickel-Cadmium rechargeable the batterytype should be AA 3.6V 600mAh..Do not dispose of the battery pack in a fire. The cell may explode. Check with local codes for possible special disposal instructions.d. Do not attempt to open or mutilate the battery pack. Thechemicals are dangerous and may cause damage to the eyes orskin, and may be toxic if swallowed.e. Follow the charging instructions outlined in this manual.Save These InstructionsHandset Battery CautionCAUTION:To Reduce the risk of fire or injury to persons, read and follow theseinstructions.1. Use only the following type and size batteries in the cordlessphone: Self-contained 3-cell Nickel-Cadmium rechargeablebattery type should be AA 3.6V 600mAh..34
2. Do not dispose of the battery (ies) in a fire. The cell mayexplode. Check with local codes for possible special disposalinstructions.3. Do not open or mutilate the battery (ies). Released electrolyte iscorrosive and may cause damage to the eyes or skin. It may betoxic if swallowed.4. Handle batteries carefully in order to prevent short-circuiting thebattery with conducting material such as rings, bracelets, and keys.The battery or conductor may overheat and cause burns.5. Charge the battery (ies) provided with or identified for use withthis product only in accordance with the instructions and limitations specified in this manual.6. Do not mix old and new batteries in this product (applies toproducts employing more than one user replaceable secondbattery).7. Do not mix batteries of different sizes or from differentmanufacturers in this product. (applies to products employing morethan one user replaceable secondary battery).8. Do not attempt to recharge the battery (ies) provided with or identified for use with this product. The batteries may leak corrosiveelectrolyte or explode.9. Do not attempt to rejuvenate the battery (ies) provided with oridentified for use with this product by heating them. Sudden release of the battery electrolyte may occur, causing burnsor irritation to the eyes or skin.10. When inserting batteries into this product, the proper polarity ordirection must be observed. Reverse insertion of batteries cancause charging, and that may result in leakage or explosions.(Applies to product employing more than one separatelyreplaceable primary battery).11. Remove the batteries from this product if the product will not beused for a long period of time (several months or more), sinceduring this time the battery could leak into the product.12. Discard “dead” batteries as soon as possible since “dead”batteries are more likely to leak into a product.13. Do not store this product, or the batteries provided withor identified for use with this product, in high temperature areas.Batteries that are stored in a freezer or refrigerator for thepurpose of extending shelf life should be protected from condensation during storage and defrosting. Batteries should be stabilized at room temperature, prior to use after cold storage.56Ni-CdRBRCRBRCNOTE: The RBRC seal on the battery used in yourSouthwestern Bell Freedom Phone production in-dicates that we are participating in a program tocollect and recycle Nickel Cadmium batteriesthroughout the United States. Pls. contact your lo-cal recycling center.
CONTENTSIMPORTANT SAFETY INSTRUCTIONS ......................................................... 3Handset Battery Pack ................................................................................... 4Handset Battery Caution ..................................................................................... 5Handset Diagram ................................................................................................. 8Base Diagram ...................................................................................................... 9Traits of Cordless Telephones ............................................................................ 10Installation .......................................................................................................... 11Box Contents ............................................................................................... 11Preliminary Preparation Telephone Line Installation .................................. 11Modular Outlet ..................................................................................... 11Wall Mounting ..................................................................................... 12Handset Battery Charging ..................................................................... 12Setup..................................................................................................... 13Telephone Operation ................................................................................... 14Making a Call ....................................................................................... 14Receiving a Call Through the Handset ................................................. 14Memory Features............................................................................................ 14To Program Frequently Called Numbers: .................................................... 14To Delete a Memory Location: .................................................................... 15To Dial Number Stored in Memory: ............................................................ 15Redial .............................................................................................................. 16Flash ............................................................................................................... 16Receiver Volume Control ............................................................................... 16Page/Handset Locator ..................................................................................... 16Low Battery Warning ..................................................................................... 16Caller ID Operation ........................................................................................ 17Receiving a Call .......................................................................................... 17Reviewing Calls .......................................................................................... 17To Store Caller ID Record: .......................................................................... 17Caller ID Redial ........................................................................................... 17Caller ID Erase ............................................................................................. 18Answering System Operation ........................................................................ 19Base Control Operation ............................................................................... 19Handset Remote Operation .......................................................................... 21Line Remote Operation ............................................................................... 22Belt Clip ............................................................................................................. 22Optional Headset ................................................................................................ 22FCC Wants You To Know .................................................................................. 23Product Care ....................................................................................................... 24Additional Information ....................................................................................... 24Service ................................................................................................................ 25Limited Warranty ................................................................................................ 2578Handset Diagram//
Base Diagram910Traits of Cordless TelephonesA. Cordless telephones offer convenience and mobility duringtelephone conversations. The use of cordless phones isdependent upon the availability of AC power. Any disruption ofelectrical power at your location will prevent the placing orreceiving of telephone calls. It is recommended that a cordlesstelephone should not be installed as the only phone atyour location.B. The usable range of the cordless handset away from the base isdependent upon many factors. The telephone base is like a radiotransmitter in that it transmits telephone line signals via radio wavesto the handset. Therefore, the location of the base is importantin order to maximize the usable range. For example, installingthe base on the second floor, in some locations, will provide longerrange than a ground floor installation. Pick a location that givesyou the clearest signal. The following can adversely affect usablerange:* Aluminum siding* Insulation with foil backing* Any metal construction which could shield radio signalsAtmospheric conditions also play an important role in the perfor-mance of your cordless telephone.Interference can be caused by placing the base near:* Fluorescent lights* Appliances that generate electrical noise, including:* Microwaves* Televisions* VCRs* Baby monitors* Computers
C. For maximum performance, always keep the battery pack fullycharged.D. Plug your AC adaptor directly into an outlet, not an extensioncord.E. Do not plug other appliances into the outlet or have the outletcontrolled by a wall switch.F. If you want to use more than one cordless telephone in your home,the telephonesmust operate on different channels. Press thechannel key to select a channel that provides the clearestcommunication.InstallationBox ContentsBefore installing your phone, check the shipping carton to be sureyou have the following:* Base Unit * Long Telephone Line Cord* AC Adaptor * Remote Access Card* Owner’ s Manual * Handset with Rechargeable Battery* Belt Clip * Registration CardNotes:a. Keep the shipping carton and packaging, in case you need to shipyour phone.b. If there is visible damage, do not use this equipment. Contactyour shipping agent or return the telephone to the place ofpurchase.Preliminary Preparation Telephone Line Installation1. Never install telephone jack during a lightning storm.2. Never install telephone jack in wet location unless the jackis specifically designed for wet locations.3. Never touch uninsulated telephone wires or terminals unlessthe telephone line has been disconnected at the networkinterface.4. Use caution when installing or modifying telephone lines.Modular OutletThe GH3150 Cordless Telephone operates from a standard 110/120volt AC outlet. The handsets are powered by a rechargeable batterypack. Batteries are charged automatically when the handset is placedin the cradle of the base unit or charging unit.InstallationA. Plug one end of the long telephone line cord into the back of theunit and connect the other end to a modular wall jack. Press untillocking lever clicks.B. Connect the DC Adaptor into the back of the unit. Plug the otherend into a standard 110/120 volt AC outlet.C. Place the handset into the base unit. The IN USE/ CHARGE LEDwill light. The LCD display will show “Charging” for 2minutes and then return to standby mode. During these 2 minutes,user can pick up the phone and operate it in standby mode.NOTE: BATTERY PACK MUST BE CHARGED FOR 16 HOURSBEFORE INITIAL OPERATION.Handset Battery ChargingThe battery pack in the handset must be fully charged for about 16hours before using the telephone.11 12
Note:a. When the battery gets low while the phone in use, there will bea low-battery beep from the handset. The handset will alsodisplay “LOW BATTERY” on the second line of the LCD.b. If the battery becomes low while you are on a call terminate thecall quickly and put handset in the base to recharge the battery.c. The battery will hold its charge for several days out of the cradle,depending on use.To Replace Batteries1. Remove battery cover2. Remove old battery3. Install new battery4. Close battery cover.5. Place the handset on the base unit.Note: Use only the battery type that is recommended for usewith this phone.6. Charge 16 hours before first use.Note: To maximize your battery’ s life, periodically drain thebattery fully and then recharge it. To do this, unplug thephone line cord from your wall phone jack. Remove Handset fromBase/Charger unit and press the TALK button. Handset Batteriesmust then be recharged for a full 16 hours.SetupTo set Language:1. After installing the FULLY CHARGED handset battery, the handset display will light and will show “NEW CALL 00”.2. Press “PROG/FLASH” to enter the program menu.3. You can choose to see your display in 1ENG (English),2FRA (French) or 3ESP (Spanish). Press VOL/CID “ ” or “ ”button or 1,2 or 3 on the keypad to choose the desired language.1 ENG 2 FRA 3 ESP4. Press the “PROG/FLASH” key to confirm the display languageand press “EXIT/*” to leave the program menu.To set Ring Tone:This telephone offers 3 standard ring tones for user to select.1. Press “PROG/FLASH” 2 times to enter the program menuringer tone setting.2. You can choose from ringer tones 1-3 by pressing VOL/CID“ ” or “ ” button or 1,2 or 3 by keypad for changing the option.RINGER TONE 3. Press “PROG/FLASH” to confirm the ringer melody and press“EXIT/*” to leave the program menu.To set Tone/Pulse1. Press “PROG/FLASH” 3 times to enter the program menu.2. Press VOL/CID “ ” or “ ” button or press 1 or 2 by keypad toselect the TONE/PULSE item.1 TONE 2 PULSE3. Press the “PROG/FLASH” again to enter the TONE/PULSEsetting item.4. Press “PROG/FLASH“ to confirm the setting and press EXITto leave the program menu.To set DefaultThis telephone allows you to restore the phone setup options back tofactory default. The default setting will reset Menu Language backto English, Ringer Tone back to 01, and Tone/Pulse back to Tone.13 14
1. Press the “PROG/FLASH” 4 times to enter the program \menu default setting mode.2. Press VOL/CID “ ” or “ ” button to select to return toDEFAULT setting or not.DEFAULT NO3. Press “PROG/FLASH” to confirm the setting and press“EXIT/*” to leave the program menu.Telephone OperationMaking a Call1. Lift the handset and press the “TALK” button to connect tothe telephone line.2. After hearing a dial tone, dial the desired number. If you misdial,simply press the “TALK” button. Wait for a couple of seconds, and press the “TALK” button again for a new dial tone.3. After the conversation has been completed, press the “TALK”button once to disconnect the line, or return the handset to thebase. The IN USE/Charge LED, will now be ‘ charging’ .Receiving a Call Through the HandsetPress the “TALK” button on the handset.Memory FeaturesYour GH3150 is equipped with 10 memories for programming yourmost frequently dialed telephone numbers. You can store up to 24digits in each of the memory locations 1 through 10, by following thesteps outlined below.To Program Frequently Called Numbers:1. Press the“MEM” button on the handset, and the right handcorner display will show “MEM # - -” with “- -” representing the memory location that is currently displayed.2. Press the VOL/CID “ ” or “ ” or a digit to select thememory location where the telephone number is to be stored.You can choose from MEM 1-10.** EMPTY **Mem # 13. Press “MEM” to confirm the location.Note: If you do not want to confirm the memory location, press“EXIT” to return to standby mode.If the selected memory location is not empty and you do not wantto replace the content, press “EXIT/*” to keep the previousmemory record and return to standby mode.4. Edit the name (Up to 15 characters) by using the telephonekeypad buttons (1-9).ENTER NAMEMem # 3Note: Successively pressing the number 2 key quickly allowsyou to select between letters A. B. or C. This also applies toletters on dialing keys 3-9. To add a space in the name, pressthe 1 key. If you enter any letters incorrectly, press the deletekey to delete one character at a time. To repeat the same letterallow one second in between key presses.5. Press “MEM” to confirm the name.6. Enter the telephone number you wish to store, using thehandset keypad.Note: If you accidentally press a 25th digit, an error tone willsound, and you must reprogram the number.Note: To enter a pause in the dialing sequence press the“#/Pause” button. To delete a particular digit that has alreadybeen entered, press the “DELETE/CHAN” button. The digitlast entered will be deleted. To delete all of the digits, pressthe “EXIT” button.15 16
7. Press the “MEM” button to confirm the entered telephonenumber.To Delete a Memory Location:1. Press the “MEM” button on the handset, and the display willshow “MEM# - -” with “- -” representing the memorylocation that is currently displayed.2. Press VOL/CID “ ” or “ ” or a digit to find the memoryyou want to delete.3. Press the “DELETE” button on the handset.4. The unit will ask you to delete the selected telephone number andthe LCD Display will show “DELETE ?”1 2 3 4 5 6 7 8 9DELETE?Mem # 35. Press the “DELETE” button again to delete. The LCDDisplay will show “**DELETED**” and return to the standbymode.Note: Press “EXIT” key on the handset to terminate thedeletion process and return to standby mode.To Dial Number Stored in Memory:WHEN THE TALK BUTTON IS OFF:1. Press the “MEM” button on the handset, and the display willshow “MEM# --” with “-- ” representing the memorylocation that is currently displayed.2. Press VOL/CID “ ”or “ ”, or a digit to select the memorylocation where the telephone number is to be redialed. You canchoose from 1-10.3. Press the “TALK” button. The number will scroll across thescreen from left to right as it is dialed.WHEN THE TALK BUTTON IS ON:1. Press the “MEM” button on the handset.2. Press the desired memory location (1 through 10).3. Press “TALK” button to dial out the numbers.RedialYour GH3150 remembers the last number (up to 32 digits) dialed.This is a convenient feature when trying to place a call to a phonenumber that is not being answered or is continuously busy.DO NOT PRESS THE TALK BUTTON.1. Press the “REDIAL” button, and the display will show the lasttelephone number dialed.2. If you want to delete this displayed telephone number, press the“DELETE” button once for each digit shown.3. Press the “TALK” button. The number will scroll across thescreen from left to right as it is dialed.FlashYou can use your cordless telephone with special services such asCall Waiting or Three Way Conference (Special subscription fromyour local telephone company is required). During a telephone con-versation, you may hear a tone or click, which indicates that you arereceiving another call. To speak to the second caller and put the firstcall on Hold, press the “Flash” button. Press “Flash” again to returnto the original call. You may also press the “Flash” button to obtaina new dial tone.17 18
Receiver Volume ControlYour GH3150 allows you to adjust the handset volume to a morecomfortable listening level. Press VOL/CID “ ” or “ ” keys on thehandset to increase or decrease volume, while handset is in the TalkOn mode. The volume status will show on LCD.TALK 00:05 VOL2Page/Handset LocatorYou can send a page signal from the base to the handset.Press the “PAGE” button on the BASE once, and the handset willbeep for 2 minutes.Press the “TALK” button on the handset to stop the handset frombeeping, and return to standby mode.Low Battery Warning* When the handset battery voltage level is low, the handset LCDDisplay shows* “Low Battery” as follows:LOW BATTERY* Return the handset on the BASE unit for charging.Caller ID OperationReceiving a Call1. After first ring, the caller’ s name and telephone number willdisplay on the handset.2. The Caller ID information (of up to 40 callers) will be stored inthe handset display in the order received. If the received call information is the same as any of the new calls, the unit will displaythe “REPT” icon to indicate a repeat call. If the unit receivesmore than 40 calls, the oldest Caller ID information will be erased.Reviewing CallsReviewing New Call Records1. When the handset is in standby mode, press the VOL/CID “ ” or“ ” keys on the handset to display the informationNote: You can review up to 40 new caller ID calls from thehandset.2. Continue pressing the VOL/CID “ ” or “ ” keys on thehandset to review all new call records in the order the calls werereceived.When a name received exceeds 15 characters, the first 15characters will be shown.When a telephone number exceeds 15 characters, the last 15characters will be shown.To Store Caller ID Record:1. When the handset display is in standby mode, press the VOL/CID“ ” or “ ” side key on the handset to select the Caller ID recordyou want to store.2. Press the “MEM” button on the handset.3. The display will show “MEM# ” as follows:Mem # --4. Enter the desired memory location.Note: If the selected memory location is not empty, “REPLACE MEM?” will display on the LCD. Press“MEM” button to confirm the replacement. You will hear aconfirmation beep. If you do not want to confirm the replacement, press “EXIT” to keep the previous record and return tostandby mode.19 20
Caller ID RedialThe GH3150 allows you to redial a phone number in the caller IDmemory.1. When the handset is in standby mode, press the VOL/CID “ ” or“ ” keys to select the Caller ID record that you want to dial.Note: You can review and redial up to 40 Caller ID calls from thehandset.2. Press the “TALK” button on the handset. The number willscroll across the screen from left to right as it is dialed.Note: If you review the Caller ID call from the handset, youwill need to redial the call from the handset (by pressing the“TALK” button).- With current Telecom redialing situations, there are 2 redialoptions: (1) 10 digits without a 1 prefix and (2) 10 digits with a 1prefix.10 digits without a 1: In some areas of the country, the area codemust be included, even when dialing a local call. In this situation,simply press “TALK”button to dial out. You can press theFORMAT key to add a “1” prefix and your long distance callwill be dialed out.Caller ID EraseTo Erase a Caller ID Record:1. When the handset is in standby mode, press the VOL/CID “ ” or“ ” keys to select the Caller ID record you want to erase.2. Press the “DELETE” button to erase the call record; the displaywill show “DELETE CALL ID”3. Press the “DELETE” button again; the Caller ID record will bedeleted and the display will show the next call message.Note: If the current displayed message is the last message to comein, then the display will show “NO CALLS”.To Erase all Caller ID Records:1. When the current display shows the handset name or handsetnumber, press the VOL/CID “ ” or “ ” keys to review theCaller ID record.2. Press and hold “DELETE” button to erase all call records; thedisplay will show “DELETE ALL”3. Press “DELETE” button again; all the Caller ID records willbe deleted.Answering System OperationBase Control OperationTo turn Answering System ONPress the ANSWER ON/OFF button on the base to turn on the an-swering system. The message counter on the base will turn on andthe base unit will say “Answer On”. The message counter will dis-play the current message number to indicate the system is in Answerready mode.Note: The first time the answering machine is connected to A/C powerit will announce “Press Back Key for setup instructions.” You canpress this key for setup help.To turn Answering System OFFPress the ANSWER ON/OFF button on the base to turn off the an-swering system. You will hear “Answer Off”, and the message counteron the base will turn off.To check the DAY and TIME setting1. Press and Release the DAY/CHECK button. The DAY and TIMEsetting will be announced.21 22
To Set Day1. Press and Hold the DAY/CHECK button until “Monday” isannounced.2. Continue to hold down the DAY/CHECK button, and the Days ofthe week will be announced one by one.3. Release the button when the correct day is announced. The newday setting will repeat.To Set Hour1. Press the HOUR button until “12AM” is announced.2. Continue to press the HOUR button and the hours will beannounced in one hour increments (12PM, 1AM, 2AM, etc.)3. Release HOUR button when the current hour AM/PM isannounced.4. The new setting will repeat.To Set Minute1. Press the MIN button until “00” is announced.2. Press and hold MIN button to increase the minutes by incrementsof 5 (:05, :10, :15....:05).Press and release MIN button to increase the minutes byincrements of 1(:00, :01, :02....:00).3. Release MIN button when the new TIME setting is announced toconfirm the setting.To Set Remote Access CodeRemote access allows you to call in and listen to your messagesfrom an outside line. The default remote access code is 123, but werecommend that you create your own code for security purposes.Follow these easy steps to set your own code.1. Press “REMOTE/FORMAT” button on the handset2. Press “*” button.3. Key in your desired 3-digit security code.4. Press “*” button again to confirm the code.5. The new code you have set will be announced.Recording Outgoing GreetingYour system comes with a prerecorded outgoing greeting; “Pleaseleave your message after the tone.”1. Press and hold down the “Greeting” button.2. After you hear one beep, speak clearly into microphone (locatedon front of the base). You have a maximum of 1 minute to recordyour greeting. Your recording time should not be less than 2seconds.3. When finished, release the “Greeting” button.Note: If the unit beeps while you are recording your greeting,you have exceeded the 1 minute time limit. Record a shortergreeting.4. Unit will beep once, playback your recorded outgoing greeting,and then reset to answer incoming calls.Checking Your Outgoing Greeting1. Press and release the “Greeting” button.2. Your outgoing greeting will be played back to you, beep once,then reset to answer incoming calls.3. Press and release the VOL/CID “ ” or “ ” button on thebase to set the speaker to the desired sound level. You can checkthe current volume level in the base message counter.Recording a Memo1. Press and hold the “MEMO” button.2. After the beep, record your message (up to 1 minute) throughthe microphone in the front of the base.3. When your message is completed, release the “MEMO” button.The Base display message counter will indicate the revised message count. When a MEMO is recorded, your unit considers it asa standard message and will include it in the Base message count.Note: When memory is full during recording, the unit willannounce: “Memory is full.”23 24
Ring SelectYou can select the number of rings in which a call will be answered.Set the Ring Select switch (on the back of the base) to 2 or 6 rings,Voice Activated Recording (VOX)Your GH3150 records messages for up to 1 minute as long as thecaller speaks. To avoid unnecessary pauses due to hang-ups and tosave message capacity, your unit will automatically stop recordingafter 7 seconds.Message PlaybackIncoming MessagesThe GH3150 can record up to 12 minutes of incoming messages.The maximum recording time for each incoming message is 1 minute.When the answering system is on and is ready to answer the calls, thebase display will show the number of new messages and the totalnumber of messages in memory (up to 99).Note: The machine hangs up and resets to answer the next call in thefollowing cases: the caller hangs up, the message length exceeds 1minute, there are more than 7 seconds of silence or there is a steadytone (dial tone) for 7 seconds.To Hear Your Messages1. Press and release the “PLAY/STOP” button once.The unit will playback the incoming or MEMO messages in theorder they were received.2. The day and time will be heard at the end of each message.3. After all the messages have been played back, the unit will say“End of Message .” To erase all messages press and hold the“ERASE” button.4. Unit will reset to answer incoming calls.To Stop Playback of Incoming MessagesPress and release the “PLAY/STOP” button during message play-ing. Your unit will reset to answer incoming calls and will save allmessages except those marked for deletion.To Repeat the Current MessageDuring playback, press and quickly release BACK button.To Playback the Previous MessageDuring playback, press and quickly release BACK button TWICE.To Skip to the Next MessageDuring playback, press the SKIP button once to skip to the next mes-sage.Remote Handset OperationTo access your messages form the handset press the “ANS/FORMAT”key on the handset.After entering the remote handset mode, the handset display will show:REMOTE HANDSETThe voice-prompted menu will give you the following options:1) Press 7 to review the voice menu2) Press 2 to play message and press 2 again to stop3) Press 0 while playing a message to erase4) Press 1 to review the previous message5) Press 3 to skip message6) Press 4 to turn the answering machine on/off7) Press “EXIT/*” to disconnect/connect the answering machine25 26
27 28Line Remote OperationTo access your answering machine messages form an outside phoneline, dial your phone number. After listenting to the greeting, enteryour 3-digit remote access code.The voice-prompted menu will give you the following options:1) Press 7 to review the prompted voice menu2) Press 2 to play message and press 2 again to stop3) Press 0 while playing a message to erase4) Press 1 to review the previous message5) Press 3 to skip message6) Press 4 to turn the answering machine offBelt ClipYou can hang the handset on your belt or pocket using the belt clip.Optional HeadsetPlugging an optional headset into the handset allows hands-free phoneconversation.When a headset is connected to the handset, be sure to speak into theheadset microphone. If you want to return to normal conversationusing the handset, then disconnect the headset.For servicing or replacement, you can purchase a suitable headsetthrough our service center or your local retailer.For more information, contact the place of purchase, call Southwest-ern Bell Freedom Phone help line at 1-800-366-0937 or visit ourwebsite at http://www.swbfreedomphone.com.Troubleshooting GuideIf you have followed the instructions in this manual, and have diffi-culty operating your Southwestern Bell Freedom Phone® CordlessTelephone, locate the PROBLEM ACTION columns to locate andremedy the problem.Troubleshooting Guide (Cont.)PROBLEMThe unit will notoperate.No dial tone.Difficulty placing orreceiving calls.POSSIBLE CAUSEImproper installation.The digital security codehas been lost due to apower loss while thehandset was away from thebase.The battery is not charged.See the above mentionedpossible causes.The handset is being usedtoo far away from base.You may have lost thesecurity code. The handsetcan no longer communicatewith its base. The loss ofthe code can occur if thebattery is drained andneeds recharging, the DCadaptor is disconnected, apower loss occurred, orthere is electricalinterference from othercordless phones, babymonitors, microwaves, etc.Even a momentary powerinterruption could eraseyour cordless phone’ssecurity code.CORRECTIVE ACTIONRecheck all plug connections.Also, check the DC adaptor forproper connection to wall outletand phone base.Reset the digital security codeby returning the handset to thebase. A new code is set.Charge the battery for about 10-14 hours before initial use orwhen the battery handset beepsin talk mode.See above corrective actions.Move the handset closer to thebase.1. Return the handset to thebase unit for 5-10 seconds toreset code. If that doesn’t work.2. Check to make sure sure theDC adaptor is connected.3. Unplug DC adaptor frompower source, disconnecthandset battery for 5 seconds,then reconnect, place handsetback on base, then replug theDC adator.
29 30Troubleshooting Guide (Cont.)PROBLEMAnswering system willnot operate.No answerNo incoming messagesrecorded.POSSIBLE CAUSEYou may have had a power fail-ure.Unit is in the “ANSWER OFF”mode.DC adaptor is disconnected fromwall outlet or back of unit.Power to electrical outlet may beoff.Telephone line is not connectedto wall jack.Unit is in the “ANSWER OFF”mode.DC adaptor is disconnedted fromwall outlet or back of unit.Power to electrical outlet may beoff.Telephone line is not connectedto wall jack.CORRECTIVE ACTIONProceed with a unit reset (page28)Check to verify the base display shows“A” or the message count. If not, pressthe ANSWER ON/OFF button to turnthe unit on, until you hear “AnswerON”.Reconnect DC adaptor into wall out-let and back of unit.Check to see if electrical outlet is con-trolled by a light switch and power ison. Wall outlet may not be function-ing; try connecting to a different walloutlet.Connect telephone line into wall jack.Telephone wall jack may not be func-tioning; try connecting unit into a dif-ferent telephone wall jack.Check to verify the base display showsthe message count. If not, press theANSWER ON/OFF button to turn theunit on, until you hear “Answer On”.Reconnect unit into wall outlet or backof unit. Try connecting to a differentwall outlet.Check to see if electrical outlet is con-trolled by a light switch and power ison.Connect telephone line into wall jack.Try connecting unit into a differenttelephone wall jack.Troubleshooting Guide (Cont.)PROBLEMCan’t make outgoingcalls.Battery pack is notrecharging.Noise or interferenceis being heard duringyour conversation.During a conversa-tion a loud staticnoise is heard.The handset onlyworks close to thebase.The incoming call’ssignal is intermittentor fades.POSSIBLE CAUSETone/Pulse setting is not setcorrectly.The digital security codehas been lost.The base and handsetbattery contacts are not incontact with each other.Battery pack needs to bereplaced.Current channel is not theclearest choice.The handset is being usedtoo far away from the base.The base antenna is notfully upright.The battery is not charged.The handset is being usedtoo far away from the base.CORRECTIVE ACTIONSet the Tone/Pulse setting toproper position for your type ofservice.Reset the security codereturning the handset to thebase.Make certain the batterycontacts in the handset and basemake contact when handsetrests in the base. The base INUSE/CHARGE LED will be lit.Replace the battery pack at leastevery year.Press the channel button toswitch from one channel toanother. This will allow you tochoose the clearest of 40channels.Move the handset closer to thebase station.Make sure the base antenna isfully upright for the best result.Recharge the battery.Move the handset closer to thebase.
31 32Troubleshooting Guide (Cont.)PROBLEMYour telephone ringsbut the GH3150doesn’t show anyCaller ID records.You cannot redial acall record.You can’t receive callwaiting messages.The display screen isdim or blank.POSSIBLE CAUSEThe telephone line is notconnected properly to theunit.Your local area code is notprogrammed.The number display isincorrect.This service is notavailable.The display contrast is setto too low of a level.CORRECTIVE ACTIONConnect the telephone line intothe back of the unit. Check withyour local telephone companyto be sure Caller ID service isbeing provided on yourtelephone line. Also, if you pickup the phone before the firstcomplete ring, the caller IDinformation will not becompletely received.If the display does not indicate7 digits for local incomingcalls, reprogram the local areacode.Verify the number displayedduring redial. Date receivedwere possibly corrupted duringthe transmission through thetelephone lines. Dial thetelephone number manually onyour telephone.You must subscribe to CallerID, Call Waiting, as well asCall Waiting Caller ID servicefrom your local phonecompany. The phone must beoff-hook to hear the call waitingCaller ID alert signal.Press the handset “FLASH” andthen the “ *” or “# ” buttonto adjust the handset contrastlevel.Troubleshooting Guide (Cont.)PROBLEMNo remote operationThe machine iscutting off incomingmessages.POSSIBLE CAUSEDC adaptor is discon-nected from wall outlet orback of unit.Power to electrical outletmay be off.The telephone you arecalling from is not astandard touch-tone.Telephone line is notconnected to wall jack.Security code not enteredcorrectly.Remote security codebeing used differs from thecode you have set.The outgoing greeting youare recording is too long.Incoming messages are toolong.Caller may be pausing formore than 7 seconds.CORRECTIVE ACTIONReconnect unit into wall outletor back of unit. Try connectingto a different wall outlet.Check to see if electrical outletis controlled by a light switchand power is on.Try calling from a differentlocation (e.g. pay phone).Connect telephone line intowall jack. Try connecting into adifferent telephone wall jack.3 digit remote security codemust be entered within tenseconds of the beep at the endof your outgoing greeting. Pressand hold each digit for 2seconds, allowing a minimumof 2 seconds between digits.Press the “CH” buttons on theGH3150 handset to check thecurrent set security code. (seepage29)Record a shorter outgoinggreeting (between 2 and 60seconds.)Maximum recording time forincoming messages is 60seconds.Caller must speak continuouslywithout any long pauses.
33 34FCC Wants You To KnowThis equipment complies with Part 68 of the FCC rules and the re-quirements adopted by the ACTA. On the bottom of this equipmentis a label that contains, among other information, a product identifierin the format US:AAAEQ##TXXXX. If requested, this number mustbe provided to the telephone company. You must, upon request, pro-vide this information to your telephone company.FCC compliant telephone cord and modular plug are provided withthis equipment. This equipment is designed to be connected to thetelephone network or premise wiring using a compatible modularjack which is Part 68 compliant. See installation instructions for de-tails.The REN is used to determine the number of devices that may beconnected to a telephone line. Excessive RENs on a telephone linemay result in the devices not ringing in response to an incoming call.In most but not all areas, the sum of RENs should not exceed five(5.0).To be certain of the number of devices that may be concerned to aline, as determined by the total RENs, contact the local telephonecompany. [For products approved after July 23, 2001, the REN forthis product is part of the product identifier that has the formatUS:AAAEQ##TXXXX. The digits represented by ## are the RENwithout a decimal point (e.g., 03 is a REN of 0.3). For earlier prod-ucts, the REN is separately shown on the label.].If your telephone equipment causes harm to the telephone network,the telephone company may discontinue your service temporarily. Ifpossible, they will notify you in advance. But if advance notice isn’ tpractical, you will be notified as soon as possible. You will be in-formed of your right to file a complaint with the FCC.Your telephone company may make changes in its facilities, equip-ment, operations, or procedures that could affect the proper func-tioning of your equipment. If they do, you will be notified in advanceto give you an opportunity to maintain uninterrupted telephone ser-vice. If you experience trouble with this telephone equipment, dis-connect from the network until the problem has been corrected oruntil you are sure that the equipment is not malfunctioning.This equipment may not be used on coin service provided by thetelephone company.Connection to party lines is subject to state tariffs.This equipment is hearing aid compatible.An applicable certification jacks Universal Service Order Codes(USOC) for the equipment is provided (i.e., RJ11C) in the packagingwith each piece of approved terminal equipment.Warning: Changes or modifications to this unit not expressly approvedby the party responsible for compliance could void the user’s au-thority to operate the equipment.NOTICE: If your home has specially wired alarm equipment con-nected to the telephone line, ensure the installation of this [GH3150]does not disable your alarm equipment. If you have questions aboutwhat will disable alarm equipment, consult your telephone companyor a qualified installer.NOTE: This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equip-ment generates, uses, and can radiate radio frequency energy not in-stalled and used in accordance with the instructions, may cause harmfulinterference to radio communication. However, there is no guaranteethat interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television re-ception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one ormore of the following measures:* Reorient or relocate the receiving antenna.* Increase the separation between the equipment and receiver.* Connect the equipment to an outlet on a circuit different fromthat to which the receiver is connected.* Consult the dealer or an experienced radio TV technician forhelp.
Caution: This device complies with Part 15 of the FCC Rules. Operationis subject to the following two conditions: (1) this device may notcause harmful interference, and (2) this device must accept anyinterference received, including interference that may causeundesired operation.Privacy of communications may not be ensured when using thisphone.Product CareA. Avoid putting cordless phones near heating appliances and devices that generate electrical noise (motors, fluorescent lamps,etc.)B. Avoid rough treatment of the phone by placing the handset gentlyinto the base when hanging up. Avoid dropping the handset.C. Clean your cordless telephone only with a soft cloth slightlydampened with water or mild hand soap. Do not use any type ofsolvent or abrasive cleaner. Before cleaning, always unplug thephone from the wall outlet.D. Retain the original packaging should you need to ship the phoneat a later date.Additional InformationA. Connecting this telephone to a coin operated telephone or partyline is prohibited by law.B. If it is determined that your telephone is malfunctioning, the FCCrequires that it be disconnected from the modular outlet until theproblem has been corrected.For immediate answers to all your questions regarding theoperation of your. Southwestern Bell Freedom Phone, call theCustomer Hotline, toll-free at (800)366-0937.35 36ServiceAccording to FCC regulations, this equipment, which has been certi-fied and registered by the FCC, may only be repaired by authorizedpersons. If repairs or adjustments are made by an unauthorized per-son, the FCC certification may be voided. Should you encounter anyproblems, please call the Southwestern Bell Freedom Phone® toll-free Customer Help Line for assistance: 1-800-366-0937, Monday -Friday 8:30 am - 9:00 pm, and Saturday 8:30 am- 12:30 pm. You canalso visit our website at http://www.swbfreedomphone.com.FOR IN-WARRANTY SERVICE:Package your complete unit (including all adaptors, line cords, andother accessories) and ship the unit postage prepaid* and insured (foryour protection) to:SOUTHWESTERN BELL FREEDOM PHONE®DEPT.:Warranty Repair 7475 N. Glen Harbor Blvd., Glendale, AZ85307.Be sure to include your return address, proof of purchase, a daytimephone number, $9.50 for postage and handling*, and a brief explana-tion of your difficulties.* NOTE: California residents need only provide proof of purchaseand should call 1-800-366-0937 for shipping instructions.FOR OUT-OF-WARRANTY SERVICE:You may call our toll-free Help Line for the price of a replacementbefore returning your unit. Please follow all instructions for In-War-ranty service (above) to return your unit, and mark the package: DEPT.:Out-of-Warranty.If you have called and know the cost of your replacement, pleaseinclude this information with your unit for prompt service.
37 38Questions?STOP...DON’ T TAKE ME BACK TO THE STORE.LOOK...FOR THE TOLL-FREE “HELP” TELEPHONENUMBER.LISTEN...AS THE EXPERTS TALK YOU THROUGH THEPROBLEM.For immediate answers to your questions regarding operation,missing parts or installation, call theSOUTHWESTERN BELL FREEDOM PHONE® HELPLINE AT:1-800-366-0937http://www.swbfreedomphone.comLimited WarrantyThis Southwestern Bell Freedom Phone® is warranted to the origi-nal purchaser to be free from defects in materials and workmanshipunder normal installation, use, and service for a period of one(1)year from the date of purchase as shown on the purchaser’s receipt.The obligation of Southwestern Bell Freedom Phone Retail Salesunder this warranty shall be limited to repair or replacement (at ouroption) during the warranty period of any part which provesdefective in material or workmanship under normal installation, use,and service, provided the product is returned to Southwestern BellFreedom Phone Retail Sales (address below) TRANSPORTATIONCHARGES PREPAID (California residents call 1-800-366-0937 forshipping instructions). Products returned to us or to an AuthorizedService Center must be accompanied by a copy of the purchase re-ceipt.In the absence of such purchase receipt, the warranty period shall beone (1) year from the date of manufacture. To obtain service underthis warranty, return the defective product to the service center near-est you, together with your sales slip and $9.50 for postage and han-dling (California residents need only provide proof of purchase). Youmay also have other warranty rights which vary from state to state.This warranty shall be invalid if the product is damaged as a result ofdefacement, misuse, abuse, neglect, accident, destruction, or alter-ation of the serial number, improper electrical voltages or currents,repair alteration or maintenance by any person or party other thanour own service facility or an authorized Service Center, or any usein violation of instructions furnished by us.This warranty is also rendered invalid if this product is removed fromthe country in which it was purchased, if it is used in a country inwhich it is not registered for use, and/or if it is used in a country forwhich it was not designed. Due to variations in telephone systemsand communications laws, this product may be illegal for use in somecountries. Southwestern Bell Freedom Phone Retail Sales assumesno responsibility for damages or penalties incurred resulting fromthe use of this product in a manner or location other than that fromwhich it is intended.This one-year limited warranty is in lieu of all other expressed war-ranties, obligations, or liabilities. ANY IMPLIED WARRANTIES,OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIM-ITED TO THE IMPLIED WARRANTIES OF MERCHANTABIL-ITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BELIMITED IN DURATION TO THE ONE-YEAR DURATION OFTHIS WRITTEN LIMITED WARRANTY. SOME STATES DO NOTALLOW LIMITATIONS ON HOW LONG AN IMPLIED WAR-RANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOTAPPLY TO YOU.IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL,INCIDENTAL OR CONSEQUENTIAL DAMAGES FORBREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSEDOR IMPLIED, WHATSOEVER.

Navigation menu