Continental Conair GH3100 Cordless Phone User Manual 3110ib eng

Continental Conair Limited Cordless Phone 3110ib eng

Contents

GH3110 Users Manual

2.4GHz CordlessTelephone with Call WaitingCaller IDGH3110 OWNER’S MANUALToll-free Help Line 1-800-366-0937http://www/.swbfreedomphone.comPPSOUTHWESTERN BELL FREEDOM PHONE®7475 NORTH GLEN HARBOR BLVD., GLENDALE, AZ 85307STOP - DON'T TAKE ME BACK TO STORE.LOOK - FOR THE TOLL-FREE "HELP" TELEPHONE NUMBER.LISTEN - AS THE EXPERTS TALK YOU THROUGH THE PROBLEM.For immediate answers to your questions regarding operation,missing parts or installation, call:Southwestern Bell Freedom Phone®Retails Sales Help Line at1-800-366-0937Monday - Friday 8:30a.m. - 9:00p.m.ESTSaturday 8:30a.m. - 12:30p.m. ESThttp://www.swbfreedomphone.comSOUTHWESTERN BELL FREEDOM PHONE®7475N. GLEN HARBOR BLVD., GLENDALE, AZ 85307GH3110 Printed in China IB-5122A
PLEASE READ IMPORTANT SAFETY INSTRUCTIONS BEFOREUSE.Congratulations! You have purchased a 2.4GHz Analog Cordless Tele-phone with Type II Call Waiting Caller ID that has been manufacturedto the highest standards of SOUTHWESTERN BELL FREEDOMPHONE® Retail Sales.BEFORE INSTALLING AND OPERATING THIS TELEPHONE, ITIS VERY IMPORTANT THAT YOU READ THIS OWNER'SMANUAL.IMPORTANT SAFETY INSTRUCTIONSBEFORE USING YOUR TELEPHONE EQUIPMENT, BASICSAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWEDTO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK ANDINJURY TO PERSONS, INCLUDING THEFOLLOWING:1. Read and understand all instructions.2. Follow all warnings and instructions marked on the product.3. Unplug this product from the wall telephone jack and poweroutlet before cleaning. Do not use liquid or aerosol cleaners. Usea damp cloth for cleaning.4. Do not use this product near water, for example, near a bathtub,wash basin, kitchen sink, laundry tub, swimming pool, or in a wetbasement.5. Do not place this product on an unstable cart, stand or table. Theproduct may fall, causing serious damage.6. Slots or openings in the cabinet, back and bottom are provided forventilation, to protect equipment from overheating. Theseopenings must not be blocked or covered. Do not place theproduct on a bed, or other similar surface where the openingscould be blocked. Never place this product near or over a radiatoror heat register.7. Operate this product using only the type of power sourceindicated on the marking label. If you are not sure of the type ofpower supply in your home, consult your dealer or local powercompany.8. Do not allow anything to rest on the power cord. Do not place thisproduct where it could be stepped on and damaged.9. Do not overload wall outlets and extension cords, as this canresult in fire or electric shock.NO
10. Never push objects of any kind into this product through cabinetslots, as they may touch dangerous voltage points or short circuitparts. This could result in fire or electric shock. Never spill liquidof any kind on the product.11.To reduce the risk of electric shock, do not disassemble thisproduct. Instead, when service or repair work is required, take itto a qualified service technician. Opening or removing coversmay expose you to dangerous voltages or other risks. Incorrectreassembly can cause electric shock when the appliance issubsequently used.12. Unplug this product from the wall outlet and refer servicing toqualified service personnel under the following conditions:a. When the power supply cord or plug is damaged or frayed.b. If liquid has been spilled into the product.c. If the product has been exposed to rain or water.d. If the product has been dropped or the cabinet has beendamaged.e. If the product exhibits a distinct change in performance.If the product does not operate normally and proper operatinginstructions have been followed, adjust only those controlsthat are covered by the operating instructions. Improperadjustment of other controls may result in damage and willoften require extensive work by a qualified technician torestore the product to normal operation.13. Avoid using a telephone (other than a cordless type) during anelectrical storm.There may be a remote risk of electric shock from lightning.14. Do not use the telephone to report a gas leak if you are in thevicinity of the leak.15. Danger of explosion if battery is incorrectly replaced. Replacebattery pack only with the same or equivalent type recommendedby the manufacturer. Dispose of used according to themanufacturer instructions.Safety Instructions for BatteriesHandset Battery PackCAUTION:Use only a Southwestern Bell Freedom Phone approved battery pack inthe handset of your GH3110 Analog Cordless Telephone. To reduce therisk of fire or injury, always do the following when replacing, discard-ing or charging batteries.a. When handling the batteries, be careful not to short circuit thebattery with conducting materials such as rings, bracelets, andkeys. The battery or conducting material may overheat and causeburns.b. Use only the following type and size batteries in the cordlessphone:Self-contained 3-cell Nickel-Cadmium rechargeable battery typeAA 3.6V 600mAh.c. Do not dispose of the battery pack in a fire. The cell may explode.Check with local codes for possible special disposal instructions.d. Do not attempt to open or mutilate the battery pack. Thechemicals are dangerous and may cause damage to the eyes orskin, and may be toxic if swallowed.e. Follow the charging instructions outlined in this manual.Save These InstructionsHandset Battery CautionCAUTION:To reduce the risk of fire or injury to persons, read and follow theseinstructions.1. Use only the following type and size batteries in the cordlessphone: Self-contained 3-cell Nickel-Cadmium rechargeablebattery type AA 3.6V 600mAH.PQ
2. Do not dispose of the battery (ies) in a fire. The cell may explode.Check with local codes for possible special disposal instructions.3. Do not open or mutilate the battery (ies). Released electrolyte iscorrosive and may cause damage to the eyes or skin. It may betoxic if swallowed.4. Handle batteries carefully in order to prevent short-circuiting thebattery with conducting material such as rings, bracelets, andkeys. The battery or conductor may overheat and cause burns.5. Charge the battery (ies) provided with or identified for use withthis product only in accordance with the instructions andlimitations specified in this manual.6. Do not mix old and new batteries in this product.7. Do not mix batteries of different sizes or from differentmanufacturers in this product.8. Do not attempt to rejuvenate the battery (ies) provided with oridentified for use with this product by heating them. Suddenrelease of the battery electrolyte may occur, causing burns orirritation to the eyes or skin.9. When inserting batteries into this product, the proper polarity ordirection must be observed. Reverse insertion of batteries cancause charging, and that may result in leakage or explosions.(Applies to product employing more than one separatelyreplaceable primary battery).10. Remove the batteries from this product if the product will not beused for a long period of time (several months or more), sinceduring this time the battery could leak into the product.11.Discard "dead" batteries as soon as possible since "dead" batteriesare more likely to leak into a product.12. Do not store this product, or the batteries provided with oridentified for use with this product, in high temperature areas.Batteries that are stored in a freezer or refrigerator for the purposeof extending shelf life should be protected from condensationduring storage and defrosting. Batteries should be stabilized atroom temperature, prior to use after cold storage.RSNi-CdRBRCRBRCNOTE: The RBRC seal on the battery used in yourSouthwestern Bell Freedom Phone production indi-cates that we are participating in a program to col-lect and recycle Nickel Cadmium batteries through-out the United States. Please contact your local re-cycling center.
CONTENTSIMPORTANT SAFETY INSTRUCTIONS .......................................................... 2Handset Battery Pack ....................................................................................... 4Handset Battery Caution ....................................................................................... 4Handset Diagram ................................................................................................... 8Base Diagram ........................................................................................................ 9Traits of Cordless Telephones .............................................................................. 10Installation ............................................................................................................ 11Box Contents .................................................................................................. 11Preliminary Preparation Telephone Line Installation ..................................... 11Modular Outlet .......................................................................................... 12Handset Battery Charging ......................................................................... 12Setup.......................................................................................................... 13Telephone Operation ....................................................................................... 15Making a Call ............................................................................................ 15Receiving a Call Through the Handset ..................................................... 15Memory Features .................................................................................................. 15To Program Frequently Called Numbers: ....................................................... 15To Delete a Memory Location: ....................................................................... 17To Dial Number Stored in Memory: ............................................................... 17Redial ................................................................................................................... 18Flash ................................................................................................................... 18Receiver Volume Control ..................................................................................... 19Page/Handset Locator ........................................................................................... 19Low Battery Warning ........................................................................................... 19Caller ID Operation .............................................................................................. 19Receiving a Call .............................................................................................. 19Reviewing Calls .............................................................................................. 20To Store Caller ID Record: ............................................................................. 20Caller ID Redial .............................................................................................. 21Caller ID Erase ............................................................................................... 21Belt Clip ............................................................................................................... 22Optional Headset .................................................................................................. 22Troubleshooting Guide ......................................................................................... 22FCC Wants You To Know .................................................................................... 26Product Care ......................................................................................................... 28Additional Information ......................................................................................... 28Service .................................................................................................................. 29Limited Warranty .................................................................................................. 31Handset DiagramTU
Base Diagram Traits of Cordless TelephonesA. Cordless telephones offer convenience and mobility duringtelephone conversations. The use of cordless phones is dependentupon the availability of AC power. Any disruption of electricalpower at your location will prevent the placing or receiving oftelephone calls. It is recommended that a cordless telephoneshould not be installed as the only phone at your location.B. The usable range of the cordless handset away from the base isdependent upon many factors. The telephone base is like a radiotransmitter in that it transmits telephone line signals via radiowaves to the handset. Therefore, the location of the base isimportant in order to maximize the usable range. For example,installing the base on the second floor, in some locations, willprovide longer range than a ground floor installation. Pick alocation that gives you the clearest signal. The following canadversely affect usable range:*Aluminum siding*Insulation with foil backing*Any metal construction which could shield radio signalsAtmospheric conditions also play an important role in the perfor-mance of your cordless telephone.Interference can be caused by placing the base near:*Fluorescent lights*Appliances that generate electrical noise, including:*Microwaves*Televisions*VCRs*Baby monitors* ComputersVNM
C. For maximum performance, always keep the battery pack fullycharged.D. Plug your AC adaptor directly into an outlet, not an extensioncord.E. Do not plug other appliances into the outlet or have the outletcontrolled by a wall switch.F. If you want to use more than one cordless telephone in yourhome, the telephones must operate on different channels. Pressthe channel key to select a channel that provides the clearestcommunication.InstallationBox ContentsBefore installing your phone, check the shipping carton to be sureyou have the following:*Base Unit * Long Telephone Line Cord*AC Adaptor * Owner's Manual*Handset with Rechargeable Battery * Belt Clip*Registration CardNotes:a. Keep the shipping carton and packaging, in case you need to shipyour phone.b. If there is visible damage, do not use this equipment. Contactyour shipping agent or return the telephone to the place ofpurchase.Preliminary Preparation Telephone Line Installation1. Never install telephone jack during a lightning storm.2. Never install telephone jack in wet location unless the jack isspecifically designed for wet locations.3. Never touch uninsulated telephone wires or terminals unlessthe telephone line has been disconnected at the networkinterface.4. Use caution when installing or modifying telephone lines.Modular OutletThe GH3110 Cordless Telephone operates from a standard 110/120volt modular outlet. The handset is powered by a rechargeable batterypack. Batteries are charged automatically when the handset is placedin the cradle of the base unit.InstallationA. Plug one end of the long telephone line cord into the back of theunit and connect the other end to a modular wall jack. Press untillocking lever clicks.B. Connect the DC Adaptor into the back of the unit. Plug the otherend into a standard 110/120 volt AC outlet.C. Place the handset into the base unit. The IN USE/ CHARGE LEDwill light. The LCD display will show "NEW CALL 00" for 2minutes and then return to standby mode.NOTE: BATTERY PACK MUST BE CHARGED FOR 16 HOURSBEFORE INITIAL OPERATION.Handset Battery ChargingThe battery pack in the handset must be fully charged for about 16hours before using the telephone.NN NO
Note:a. When the battery gets low while the phone is in use, there will bea low-battery beep from the handset. The handset will alsodisplay "LOW BATTERY" on the second line of the LCD.b. If the battery becomes low while you are on a call, terminate thecall quickly and put handset in the base to recharge the battery.c. The battery will hold its charge for several days out of the cradle,depending on use.To Replace Batteries1. Remove battery cover2. Remove old battery3. Install new battery4. Close battery cover.5. Place the handset on the base unit.Note: Use only the battery type that is recommended for use withthis phone.6. Charge 16 hours before first use.Note: To maximize your battery's life, periodically drain thebattery fully and then recharge it. To do this, unplug the phoneline cord from your wall phone jack. Remove Handset from Base/Charger unit and press the TALK button. Handset Batteries mustthen be recharged for a full 16 hours.SetupTo set Language:1. After installing the FULLY CHARGED handset battery, thehandset display will light and will show "NEW CALL 00".2. Press "PROG/FLASH" to enter the program menu.3. You can choose to see your display in 1ENG (English), 2FRA(French) or 3ESP (Spanish). Press VOL/CID “” or “” buttonor 1, 2 or 3 on the keypad to choose the desired language.4. Press the "PROG/FLASH" key to confirm the display languageand press “EXIT/*” to leave the program menu.To set Ring Tone:This telephone offers 3 standard ring tones for user to select.1. Press "PROG/FLASH" 2 times to enter the program menu ringertone setting.2. You can choose from ringer tones 1-3 by pressing VOL/CID ""or "" button or 1, 2 or 3 on the keypad for changing the option.3. Press "PROG/FLASH" to confirm the ringer melody and press“EXIT/*” to leave the program menu.To set Tone/Pulse1. Press "PROG/FLASH" 3 times to enter the program menu.2. Press VOL/CID "" or "" button or press 1 or 2 on the keypadto select the TONE/PULSE item.3. Press "PROG/FLASH" to confirm the setting and press EXIT toleave the program menu.To set DefaultThis telephone allows you to restore the phone setup options back tofactory default. The default setting will reset Menu Language back toEnglish, Ringer Tone back to 01, and Tone/Pulse back to Tone.NP NQ
1. Press the "PROG/FLASH" button 4 times to enter the programmenu default setting mode.2. Press VOL/CID"" or "" button to select to return toDEFAULT setting or not.3. Press "PROG/FLASH" to confirm the setting and press “EXIT/*”to leave the program menu.Telephone OperationMaking a Call1. Lift the handset and press the "TALK" button to connect to thetelephone line.2. After hearing a dial tone, dial the desired number. If you misdial,simply press the "TALK" button. Wait for a couple of seconds,and press the "TALK" button again for a new dial tone.3. After the conversation has been completed, press the "TALK"button once to disconnect the line, or return the handset to thebase. The IN USE/Charge LED, will now be lit.Receiving a Call Through the HandsetPress the "TALK" button on the handset answer a call.Memory FeaturesYour GH3110 is equipped with 10 memories for programming yourmost frequently dialed telephone numbers. You can store up to 24digits in each of the memory locations 1 through 10, by following thesteps outlined below.To Program Frequently Called Numbers:1. Press the "MEM" button on the handset, and the right cornerdisplay will show "MEMO# - -" representing the memorylocation that is currently displayed.2. Press the VOL/CID "" or "" or a digit to select the memorylocation where the telephone number is to be stored. You canchoose from MEM 1-10.PK Press "MEM" to confirm the location.Note: If you do not want to confirm the memory location, press"EXIT" to return to standby mode.If the selected memory location is not empty and you do not wantto replace the content, press "EXIT/*" to keep the previousmemory record and return to standby mode.4. Edit the name (Up to 15 characters) by using the telephonekeypad buttons (1-9).Note: Successively pressing the number 2 key quickly allows youto select between letters A, B. or C. This also applies to letters ondialing keys 3-9. To add a space in the name, press the 1 key. Ifyou enter any letters incorrectly, press the delete key to delete onecharacter at a time. To repeat the same letter, allow one second inbetween key presses.5. Press "MEM" to confirm the name.6. Enter the telephone number you wish to store, using the handsetkeypad.Note: If you accidentally press a 25th digit, an error tone willsound.Note: To enter a pause in the dialing sequence, press the "#/Pause"button. To delete a particular digit that has already been entered,press the “DELETE/CHAN” button. The digit last entered will bedeleted. To delete all of the digits, press the “EXIT” button.NR NS
7. Press the 'MEM" button to confirm the entered telephone number.To Delete a Memory Location:1. Press the "MEM" button on the handset, and the display willshow "MEMO# - -" representing the memory location that iscurrently displayed.2. Press VOL/CID "" or "" or a digit to find the memory youwant to delete.3. Press the "DELETE" button on the handset.4. The unit will ask you to delete the selected telephone number andthe LCD Display will show "DELETE ?"5. Press the "DELETE" button again to delete. The LCD Displaywill show "**DELETED**" and return to the standby mode.Note: Press "EXIT" key on the handset to terminate the deletionprocess and return to standby mode.To Dial Number Stored in Memory:WHEN THE TALK BUTTON IS OFF:1. Press the "MEM" button on the handset, and the display willshow "MEMO# --" representing the memory location that iscurrently displayed.2. Press VOL/CID "" or "", or a digit to select the memorylocation where the telephone number is to be redialed. You canchoose from 1-10.3. Press the "TALK" button. The number will scroll across thescreen from left to right as it is dialed.WHEN THE TALK BUTTON IS ON:1. Press the "MEM" button on the handset.2. Press the desired memory location (0 through 9) to dial out thenumber.RedialYour GH3110 remembers the last number (up to 32 digits) dialed. Thisis a convenient feature when trying to place a call to a phone numberthat is not being answered or is continuously busy.DO NOT PRESS THE TALK BUTTON.1. Press the "REDIAL" button, and the display will show the lasttelephone number dialed.2. If you want to delete this displayed telephone number, press the"DELETE" button once for each digit shown.3. Press the "TALK" button. The number will scroll across thescreen from left to right as it is dialed.FlashYou can use your cordless telephone with special services such as CallWaiting or Three Way Conference (special subscription from your lo-cal telephone company is required). During a telephone conversation,you may hear a tone or click, which indicates that you are receivinganother call. To speak to the second caller and put the first call on Hold,press the "Flash' button. Press 'Flash" again to return to the originalcall. You may also press the "Flash" button to obtain a new dial tone.NT NU
Receiver Volume ControlYour GH3110 allows you to adjust the handset volume to a more com-fortable listening level. Press VOL/CID "" or "" keys on the hand-set to increase or decrease volume, while handset is in the Talk Onmode. The volume status will show on the LCD.Page/Handset LocatorYou can send a page signal from the base to the handset.Press the "PAGE" button on the BASE once, and the handset will beepfor 2 minutes.Press the "TALK" button on the handset to stop the handset from beeping,and return to TALK mode.Low Battery Warning*When the handset battery voltage level is low, the handset LCDDisplay shows.*"Low Battery" as follows:*Return the handset on the BASE unit for charging.Caller ID OperationReceiving a Call1. After first ring, the caller's name and telephone number will bedisplayed on the handset.2. The Caller ID information (of up to 40 callers) will be stored inthe handset display in the order received. If the received callinformation is the same as any of the new calls, the unit will displaythe "REPT" icon to indicate a repeat call. If the unit receives morethan 40 calls, the oldest Caller ID information will be erased.Reviewing CallsReviewing New Call Records1. When the handset is in standby mode, press the VOL/CID "" or"" keys on the handset to display the information.Note: You can review up to 40 new Caller ID calls from thehandset.2. Continue pressing the VOL/CID "" or "" keys on the handsetto review all new call records in the order the calls were received.When a name received exceeds 15 characters, the first 15characters will be shown.When a telephone number exceeds 15 characters, the last 15characters will be shown.To Store Caller ID Record:1. When the handset display is in standby mode, press the VOL/CID"" or "" key on the handset to select the Caller ID recordyou want to store.2. Press the “MEM” button on the handset.3. The display will show “MEMO#” as follows:4. Enter the desired memory location.Note: If the selected memory location is not empty, “REPLACEMEMO” will be displayed on the LCD. Press “MEM” button toconfirm the replacement. You will hear a confirmation beep. Ifyou do not want to confirm the replacement, press “EXIT” tokeep the previous record and return to standby mode.NV OM
Call ID RedialThe GH3110 allows you to redial a phone number in the Caller IDmemory.1. When the handset is in standby mode, press the VOL/CID "" or"" keys to select the Caller ID record that you want to dial.Note: You can review and redial up to 40 Caller ID calls from thehandset.2. Press the “TALK” button on the handset. The number will scrollacross the screen from left to right as it is dialed.Note: If you review the Caller ID call from the handset, you willneed to redial the call from the handset (by pressing the “TALK”button).- With current Telecom redialing situations, there are 2 redialoptions: (1) 10 digits without a 1 prefix and (2) 10 digits with a 1prefix.10 digits without a 1: In some areas of the country, the area codemust be included, even when dialing a local call. In this situation,simply press “TALK” button to dial out. You can press theFORMAT key to add a “1” prefix and your long distance call willbe dialed out.Caller ID EraseTo Erase a Caller Record:1. When the handset is in standby mode, press the VOL/CID "" or"" keys to select the Caller ID record you want to erase.2. Press the “DELETE” button to erase the call record; the displaywill show “DELETE CALL ID”.3. Press the “DELETE” button again; the Caller ID record will bedeleted and the display will show the next call message.Note: If the current displayed message is the last message to comein, then the display will show “NEW CALL 00”.To Erase all Caller ID Records:1. When the current display shows the handset name or handsetnumber, press the VOL/CID "" or "" keys to review theCaller ID record.2. Press and hold “DELETE” button to erase all call records; thedisplay will show “DELETE ALL”.3. Press “DELETE” button again; all the Caller ID records will bedeleted.Belt ClipYou can hang the handset on your belt or pocket using the belt clip.Optional HeadsetPlugging an optional headset into the handset allows hands-free phoneconversation.When a headset is connected to the handset, be sure to speak into theheadset microphone. If you want to return to normal conversation us-ing the handset, then disconnect the headset.For servicing or replacement, you can purchase a suitable headsetthrough our service center or your local retailer.For more information, contact the place of purchase, call SouthwesternBell Freedom Phone help line at 1-800-366-0937 or visit our website athttp://www.swbfreedomphone.com.Troubleshooting GuideIf you have followed the instructions in this manual, and havedifficulty operating your Southwestern Bell Freedom Phone®Cordless Telephone, locate the PROBLEM AND CORRECTIVEACTION columns to locate and remedy the problem.ON OO
OP OQTroubleshooting Guide (Cont.)PROBLEMThe unit will notoperate.No dial tone.Difficulty placing orreceiving calls.POSSIBLE CAUSEImproper installation.The digital security codehas been lost due to apower loss while thehandset was away fromthe base.The battery is not charged.See the above mentionedpossible causes.The handset is being usedtoo far away from base.You may have lost the se-curity code. The handsetcan no longer communi-cate with its base. The lossof the code can occur ifthe battery is drained andneeds recharging, the DCadaptor is disconnected, apower loss occurred, orthere is electrical interfer-ence from other cordlessphones, baby monitors,microwaves, etc. Even amomentary power inter-ruption could erase yourcordless phone’s securitycode.CORRECTIVE ACTIONRecheck all plugconnections. Also, checkthe DC adaptor for properconnection to wall outletand phone base.Reset the digital securitycode by returning the hand-set to the base. A new code isset.Charge the battery for about10-14 hours before initial useor when the battery handsetbeeps in talk mode.See above corrective actions.Move the handset closer tothe base1. Return the handset to thebase unit for 5-10 seconds toreset code. If that doesn’twork, then.2. Check to make sure the DCadaptor is connected.3. Unplug DC adaptor frompower source, disconnecthandset battery for 5 seconds,then reconnect, place hand-set back on base. Then replugthe DC adaptor.Troubleshooting Guide (Cont.)PROBLEMCan’t make outgoingcalls.Battery pack is notrecharging.Noise or interferenceis being heard duringyour conversation.During a conversa-tion a loud staticnoise is heard.The handset onlyworks close to thebase.The incoming call’ssignal is intermittentor fades.POSSIBLE CAUSETone/Pulse setting is notset correctly.The digital security codehas been lost.The base and handset bat-tery contacts are not incontact with each other.Battery pack needs to bereplaced.Current channel is not theclearest choice.The handset is being usedtoo far away from thebase.The base antenna is notfully upright.The battery is not charged.The handset is being usedtoo far away from thebase.CORRECTIVE ACTIONSet the Tone/Pulse setting toproper setting for your typeof service.Reset the security code re-turning the handset to thebase.Make certain the battery con-tacts in the handset and basemake contact when handsetrests in the base. The base INUSE/CHARGE LED will belit.Replace the battery pack atleast every year.Press the channel button toswitch from one channel toanother. This will allow youto choose the clearest of 40channels.Move the handset closer tothe base station.Make sure the base antennais fully upright for the bestresult.Recharge the battery.Move the handset closer tothe base.
OR OSTroubleshooting Guide (Cont.)PROBLEMYour telephonerings but theGH3110 doesn’tshow any CallerID records.You cannot rediala call record.You can’t receivecall waitingmessages.POSSIBLE CAUSEThe telephone line isnot connected properlyto the unit.Your local area code isnot programmed.The number displayedis incorrect.This service is notavailable.CORRECTIVE ACTIONConnect the telephoneline into the back of theunit. Check with your lo-cal telephone company tobe sure Caller ID serviceis being provided on yourtelephone line. Also, ifyou pick up the phone be-fore the first completering, the caller ID infor-mation will not be com-pletely received.If the display does not in-dicate 7 digits for local in-coming calls, reprogramthe local area code.Verify the number dis-played during redial. Datereceived were possiblycorrupted during thetransmission through thetelephone lines. Dial thetelephone number manu-ally on your telephone.You must subscribe toCaller ID, Call Waiting, aswell as Call WaitingCaller ID service fromyour local phonecompany. The phonemust be off-hook to hearthe call waiting Caller IDalert signal.FCC Wants You To KnowThis equipment complies with Part 68 of the FCC rules and the require-ments adopted by the ACTA. On the bottom of this equipment is a labelthat contains, among other information, a product identifier in the for-mat US:AAAEQ##TXXXX. If requested, this number must be pro-vided to the telephone company. You must, upon request, provide thisinformation to your telephone company.FCC compliant telephone cord and modular plug are provided with thisequipment. This equipment is designed to be connected to the telephonenetwork or premise wiring using a compatible modular jack which isPart 68 compliant. See installation instructions for details.The REN is used to determine the number of devices that may be con-nected to a telephone line. Excessive RENs on a telephone line mayresult in the devices not ringing in response to an incoming call. Inmost but not all areas, the sum of RENs should not exceed five(5.0). Tobe certain of the number of devices that may be concerned to a line, asdetermined by the total RENs, contact the local telephone company.[For products approved after July 23, 2001, the REN for this product ispart of the product identifier that has the format US:AAAEQ##TXXXX.The digits represented by ## are the REN without a decimal point (e.g.,03 is a REN of 0.3). For earlier products, the REN is separately shownon the label.].If your telephone equipment causes harm to the telephone network, thetelephone company may discontinue your service temporarily. Ifpossible, they will notify you in advance. But if advance notice isn'tpractical, you will be notified as soon as possible. You will be informedof your right to file a complaint with the FCC.Your telephone company may make changes in its facilities, equipment,operations, or procedures that could affect the proper functioning ofyour equipment. If they do, you will be notified in advance to give youan opportunity to maintain uninterrupted telephone service. If you ex-perience trouble with this telephone equipment, disconnect from thenetwork until the problem has been corrected or until you are sure thatthe equipment is not malfunctioning.
OT OUThis equipment may not be used on coin service provided by the tele-phone company.Connection to party lines is subject to state tariffs.This equipment is hearing aid compatible.An applicable certification jacks Universal Service Order Codes (USOC)for the equipment is provided (i.e., RJ11C) in the packaging with eachpiece of approved terminal equipment.Warning: Changes or modifications to this unit not expressly approvedby the party responsible for compliance could void the user's authorityto operate the equipment.NOTICE: If your home has specially wired alarm equipment connectedto the telephone line, ensure the installation of this [GH3110] does notdisable your alarm equipment. If you have questions about what willdisable alarm equipment, consult your telephone company or a quali-fied installer.NOTE: This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harm-ful interference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy not installed and used inaccordance with the instructions, may cause harmful interference toradio communication. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be de-termined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:*Reorient or relocate the receiving antenna.*Increase the separation between the equipment and receiver.*Connect the equipment to an outlet on a circuit different from thatto which the receiver is connected.* Consult the dealer or an experienced radio TV technician for help.Caution: This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) this device may not causeharmful interference, and (2) this device must accept any interfer-ence received, including interference that may cause undesiredoperation.Privacy of communications may not be ensured when using thisphone.Product CareA. Avoid putting cordless phones near heating appliances anddevices that generate electrical noise (motors, fluorescent lamps,etc.)B. Avoid rough treatment of the phone by placing the handset gentlyinto the base when hanging up. Avoid dropping the handset.C. Clean your cordless telephone only with a soft cloth slightlydampened with water or mild hand soap. Do not use any type ofsolvent or abrasive cleaner. Before cleaning, always unplug thephone from the wall outlet.D. Retain the original packaging should you need to ship the phoneat a later date.Additional InformationA. Connecting this telephone to a coin operated telephone or partyline is prohibited by law.B. If it is determined that your telephone is malfunctioning, the FCCrequires that it be disconnected from the modular outlet until theproblem has been corrected.For immediate answers to all your questions regarding theoperation of your Southwestern Bell Freedom Phone, call theCustomer Hotline, toll-free at (800)366-0937.
OV PMServiceAccording to FCC regulations, this equipment, which has been certi-fied and registered by the FCC, may only be repaired by authorizedpersons. If repairs or adjustments are made by an unauthorized person,the FCC certification may be voided. Should you encounter anyproblems, please call the Southwestern Bell Freedom Phone® toll-freeCustomer Help Line for assistance: 1-800-366-0937, Monday - Friday8:30 am - 9:00 pm, and Saturday 8:30 am- 12:30 pm. You can also visitour website at http://www.swbfreedomphone.com.FOR IN-WARRANTY SERVICE:Package your complete unit (including all adaptors, line cords, and otheraccessories) and ship the unit postage prepaid* and insured (for yourprotection) to:SOUTHWESTERN BELL FREEDOM PHONE®DEPT.: Warranty Repair 7475N. Glen Harbor Blvd., Glendale, AZ85307.Be sure to include your return address, proof of purchase, a daytimephone number, $9.50 for postage and handling*, and a brief explana-tion of your difficulties.* NOTE: California residents need only provide proof of purchaseand should call 1-800-366-0937 for shipping instructions.FOR OUT-OF-WARRANTY SERVICE:You may call our toll-free Help Line for the price of a replacementbefore returning your unit. Please follow all instructions for In-War-ranty service (above) to return your unit, and mark the package: DEPT.:Out-of-Warranty.If you have called and know the cost of your replacement, please in-clude this information with your unit for prompt service.Questions?STOP... DON'T TAKE ME BACK TO THE STORE.LOOK... FOR THE TOLL-FREE "HELP" TELEPHONENUMBER.LISTEN... AS THE EXPERTS TALK YOU THROUGH THEPROBLEM.For immediate answers to your questions regarding operation,missing parts or installation, call theSOUTHWESTERN BELL FREEDOM PHONE HELP®LINE AT:1-800-366-0937http://www.swbfreedomphone.com
PN POLimited WarrantyThis Southwestern Bell Freedom Phone® is warranted to the originalpurchaser to be free from defects in materials and workmanship undernormal installation, use, and service for a period of one(1) year fromthe date of purchase as shown on the purchaser's receipt.The obligation of Southwestern Bell Freedom Phone Retail Sales un-der this warranty shall be limited to repair or replacement (at our option)during the warranty period of any part which proves defective in mate-rial or workmanship under normal installation, use, and service, pro-vided the product is returned to Southwestern Bell Freedom Phone RetailSales (address below) TRANSPORTATION CHARGES PREPAID(California residents call 1-800-366-0937 for shipping instructions).Products returned to us or to an Authorized Service Center must beaccompanied by a copy of the purchase receipt.In the absence of such purchase receipt, the warranty period shall beone (1) year from the date of manufacture. To obtain service under thiswarranty, return the defective product to the service center nearest you,together with your sales slip and $9.50 for postage and handling(California residents need only provide proof of purchase). You mayalso have other warranty rights which vary from state to state.This warranty shall be invalid if the product is damaged as a result ofdefacement, misuse, abuse, neglect, accident, destruction, or alterationof the serial number, improper electrical voltages or currents, repairalteration or maintenance by any person or party other than our ownservice facility or an authorized Service Center, or any use in violationof instructions furnished by us.This warranty is also rendered invalid if this product is removed fromthe country in which it was purchased, if it is used in a country in whichit is not registered for use, and/or if it is used in a country for which itwas not designed. Due to variations in telephone systems and commu-nications laws, this product may be illegal for use in some countries.Southwestern Bell Freedom Phone Retail Sales assumes no responsi-bility for damages or penalties incurred resulting from the use of thisproduct in a manner or location other than that from which it is intended.This one-year limited warranty is in lieu of all other expressed warranties,obligations, or liabilities. ANY IMPLIED WARRANTIES,OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIM-ITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIM-ITED IN DURATION TO THE ONE-YEAR DURATION OF THISWRITTEN LIMITED WARRANTY. SOME STATES DO NOT AL-LOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTYLASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TOYOU.IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL, INCI-DENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OFTHIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED,WHATSOEVER.Some states do not allow the exclusion or limitation of special, incidental,or consequential damages, so the above limitation or exclusion may notapply to you. This warranty gives you specific legal rights, and youmay also have other rights which vary from state to state.

Navigation menu