Control4 C4TW7C0 TOUCH SCREEN INTERFACE DEVICE User Manual
Control4 TOUCH SCREEN INTERFACE DEVICE Users Manual
Control4 >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1745357 |
| Application ID | 8t4X6WS1MfRQfQOfH7a8KQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 162.86kB (2035688 bits) |
| Date Submitted | 2012-07-17 00:00:00 |
| Date Available | 2012-07-17 00:00:00 |
| Creation Date | 2017-10-30 22:59:41 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-30 22:59:41 |
| Document Title | Users Manual |
| Document Creator | Adobe InDesign CS5 (7.0.4) |
™ NOTE: Video Intercom using 802.11b is not recommended or supported for Video Intercom. Control4 recommends Wireless-N for Video Intercom. See “Wireless Network Limitations” and “Power and Network 7” In-Wall Touch Screen with Camera Installation Guide Installation Options.” • Option 1: Ethernet with PoE. The Ethernet network connection is provided through the PoE Injector. No additional wiring is needed. • Option 2: Ethernet with AC. Connect the Touch Screen to one of the RJ-45 LAN ports on the gateway/router using the RJ-45 Ethernet cable. • Option 3: WiFi with AC. The internal WiFi will communicate with the LAN’s WAP. If the LAN has a WAP set up, no additional wiring is needed. Supported Models Introduction The Control4® 7” In-Wall Touch Screen with Camera ofers complete system control in an elegant and compact design. This Touch Screen is equipped with a capacitive Touch Screen and four (4) programmable shortcut buttons plus Audio and Video Intercom (with a built-in camera) using SIP. The available power options are AC power or Powerover-Ethernet (PoE); the network options are WiFi or Ethernet connections. This Touch Screen supports new construction or retroit installations. • AC. AC power is used to power the Touch Screen when using an Ethernet or WiFi network connection. • PoE. PoE is used to power the Touch Screen • C4-TW7C0- BL - 7 Inch Wall Mount Capacitive Touch Screen with Camera, Ethernet/WiFi, PoE/ Universal Voltage, Black • C4-TW7C0- WH - 7 Inch Wall Mount Capacitive Touch Screen with Camera, Ethernet/WiFi, PoE/ Universal Voltage, White Associated SKUs: • C4-TSWMC5-EG-WH – 5” In-Wall Touch Screen, White (no camera) • C4-TSWMC7-EG-WH – 7” In-Wall Touch Screen, White (no camera) • C4-TSWMC5-EG-BL – 5” In-Wall Touch Screen, Black (no camera) • C4-TSWMC7-EG-BL – 7” In-Wall Touch Screen, Black (no camera) Box Contents when using an Ethernet or WiFi network connection. Carefully unpack the contents of the box, and make sure the following items are included. If any item is The following table shows the available network missing or damaged, please contact your Control4 options with power. Reseller. • Ethernet with PoE • 7” In-Wall Touch Screen with Camera • Ethernet with AC • Power box (used to power the Touch Screen) • WiFi with AC • Two (2) screws to attach the power box • Warranty card ™ Dimensions (H x W x D) 4.88” x 7.2” x .60” (124 mm x 183 mm x 15.24 mm) Weight 1.15 lbs. (.52 kg) Shipping Weight 1.8 lbs. (.81 kg) Network WiFi (802.11 b/g/n) wireless access point (WAP) already conigured to communicate with a Control4 Controller (e.g., HC-800). Wireless-N is recommended for Video Intercom. 7” In-Wall Touch Screen with Camera Installation Guide Notes: (1) Intercom usage. 802.11b is not recommended or supported for Video Intercom. (2) Wireless-N is recommended for Video Intercom. Even with Wireless-N, broadcasting to several devices will degrade Video Intercom response time and images. Broadcasting to additional devices will further degrade performance. See “Wireless Network Limitations.” Accessories • PoE. Control4 Power over Ethernet Injector, sold separately (AC-POE1-B). • Back Box Options. There are four (4) back Requirements box options available for this Touch Screen’s installation. Metal and plastic back boxes To install the 7” In-Wall Touch Screen with Camera, are available for new construction or retroit Control4 requires the following: installations. • 5” and 7” In-Wall Touch Screen Back Box Kits New Construction with a Control4® system. • Control4 7” Touch Screen custom back box installed (OS 2.2.1 or later). See “Accessories.” - 5” and 7” In-Wall Touch Screens Wall Box, New Construction, Plastic (C4-NWB57C-P) A Home Controller fully installed and conigured • If using Ethernet with PoE power: - Ethernet network installed and available that - 5” and 7” In-Wall Touch Screens Wall Box, includes a gateway/router/switch New Construction, Metal (C4-NWB57C-M) - Control4 PoE Injector (model #AC-POE1-B) 5” and 7” In-Wall Touch Screen Back Box Kit - or another third-party PoE Injector or switch Retroit (certiied to UL/ANSI standards). - 5” and 7” In-Wall Touch Screens Wall Box, - Two (2) Ethernet CAT5 cables: (1) one that runs from the Ethernet gateway/router/switch Retroit, Plastic (C4-RWB57C-P) to the PoE Injector/switch and (2) one that runs - 5” and 7” In-Wall Touch Screens Wall Box, from the PoE Injector/switch to the Ethernet Retroit, Metal (C4-RWB57C-M) connection in the Touch Screen’s back box. See the Control4 5” or 7” In-Wall Touch Screen • Wall Box Installation Guide - New Construction or If using Ethernet with AC power: - Ethernet network installed and available that 5” or 7” In-Wall Touch Screen Wall Box Installation includes a gateway/router/switch Guide - Retrofit for back box installation details. - Access to in-wall AC power (a neutral connection is required) Specifications - One (1) Ethernet CAT5 cable that runs from the Ethernet gateway/router/switch to the Touch Screen Wireless 7” 16:9 wide VGA Color LCD Module Resolution: 800 x 480 Camera: 640 x 480 VGA Brightness: 350 nits Built In IEEE802.11 b/g/n Wireless LAN Integral Antenna (b/g/n supported) Authentication: WEP, WPA, WPA2 Screen - A 14-gauge electrical wire long enough to pull between the Touch Screen and the power source • If using wireless with AC power: - Wireless network (WiFi 802.11 b/g/n) installed and available with a wireless access point (WAP) - Access to in-wall AC power (a neutral connection is required) Back View - A 14-gauge electrical wire long enough to pull between the Touch Screen and the power source Figure 2. Back View - 7” In-Wall Touch Screen with Camera and Power Box Front and Rear Panel Descriptions Front View Figure 1. Front View - 7” In-Wall Touch Screen Wire Connection. Hot (H) uses Black wire; Return (R) uses White wire. RJ-45 port for Ethernet Connection. Ethernet port available for either a standard Ethernet source that provides network communication only OR a PoE source that provides power to the device and network communication. Display. 7” viewing area, Touch Screen with 800 x Touch Screen Placement 480 resolution. Shortcut buttons (4). For custom programming; Place the Touch Screen in a convenient location at to initiate an action or sequence of actions. Use eye level, typically near the entrance of the room, Composer Pro or Composer HE to conigure approximately 57 to 61 inches (145 cm to 155 cm) these buttons. from the loor (see Figure 3). Green LED. Lets you know the camera is on. Camera. For Video Intercom calls. NOTE: Consider the camera on the panel and the height of the people in the home who will Dimensions use the camera for Video Intercom. - Front dimensions. 7” Touch Screen (H x W x D): 4.88” x 7.2” x .60” (124 mm x 183 mm x Figure 3. Touch Screen Placement 15.24 mm) - Back box dimensions. 7” Touch Screen (H x W x D): 2.7” x 4.1” x 2.4” (68 mm x 104 mm x 61 mm) New Device - Power box dimensions. 7” Touch Screen (H x W x D): 2.8” x 4.5” x 1.8” (71 mm x 114 mm x 46 mm) AC Power (unless using PoE) Touch Screen Removal Use the small hole located under the Touch Screen to remove the Touch Screen from the wall (for details, LED Indicator see Figure 10 in “Troubleshooting”). The LED on the Touch Screen indicates the camera status of the camera and booting information as described in the next table. Camera LED Color/ CAUTION! Do not attempt to use PoE and Touch Screen Status AC power at the same time. Choose only one State - Camera is of power option. Green - Camera is on ATTENTION! Ne pas tenter d’utiliser PoE et Green (blinks slowly) - Booting up AC en même temps. Choisir une seule option Green (blinks rapidly) - Restoring (during a factory restore) Of d’alimentation. Option 1: Ethernet Connection with a PoE Injector or Installation WARNING! Before installing the Touch Screen, switch of the circuit breaker or remove the fuse from the fuse box. AVERTISSEMENT! Pour l’endroit où vous installez l’écran tactile, coupez le disjoncteur ou enlevez le fusible de la boîte de fusible. IMPORTANT! Before you can complete the instructions below, you must have a 7” Touch Screen back box installed according to the documentation provided in the back box kit. a Third-Party Injector or Switch PoE supplies DC power on the Ethernet cable using a PoE Injector (model #AC-POE1-B) or a third-party PoE solution to provide the Touch Screen with power and a network connection. The Touch Screen works with the Control4 PoE Injector or a third-party PoE Injector. To set up your PoE and Ethernet connection with a PoE Injector, see Figure 4. instructions in your PoE’s installation guide if See “Accessories” for details. provided. Control4 PoE Injector instructions are IMPORTANT! En coupant l’ouverture pour la boîte de mur, ne coupez pas l’ouverture trop grande. Soyez conservateur et agrandissezavec précaution la comme nécessaire. Voyez Attach the PoE Injector according to the provided later in this document. Pull the Ethernet cable from that location to where you want to install the Touch Screen. que <>. Figure 4. Ethernet with PoE - Requires Ethernet IMPORTANT! When cutting the opening for Connection to PoE Injector the back box, DO NOT cut the opening too large. Be conservative and cautiously enlarge it as needed. IMPORTANT! En coupant l’ouverture pour la boîte de mur, ne coupez pas l’ouverture trop grande. Soyez conservateur et agrandissezavec précaution la comme nécessaire. Power and Network Installation Options This device uses an Ethernet or WiFi network connection, and can be powered using PoE or AC power. Option 2: Ethernet Connection with AC Choose one of the following options to install the The Ethernet is connected directly to the switch power and network communication. (see Figure 5). This power connection requires both neutral and hot connections. Figure 5. Ethernet - Requires a Connection to Figure 6. WiFi - Requires AC Power and WAP Ethernet and AC Power Option 3: WiFi Connection with AC Power Installation Prepare the plastic power box for installation into the Place the Touch Screen above a power source, for back box by inserting either the Ethernet cable or the example, an outlet. Ensure that you have WiFi in the AC power cable into the power box (see Figures 7 home (see Figure 6). and 8), and then follow the instructions next. NOTES: (1) Video Intercom. Although this AC Power Connection device supports b/g/n, 802.11 b is not supported for Video Intercom use. (2) The steps below represent a typical U.S. installation. Wireless-N is recommended for Video Intercom. See the Composer Pro User Guide Connect the wires to the AC power source for for details about the 7” In-Wall Touch Screen the Touch Screen according to the national and with Camera properties. local electrical codes. Installation may require alternative wires and the use of a terminal block. Wireless Network Limitations Many WiFi Access Points handle Multicasts hole of the back box to the terminal block (see (WiFi simultaneously sent to multiple devices, for example, when the 7” In-Wall Touch Screen Thread the power cable through the bottom back Figure 7). Strip the black and white power wire ends to 1/4” with Camera broadcasts video to all stations) as necessary. Using a lathead screwdriver, loosen by slowing down transmission speed to the the screws on the power box’s terminal block and 1 Mb basic rate. This can cause overall WiFi connect the power wires to each terminal (see congestion in the WiFi network during the Figure 7). broadcast. Video Intercom response times and images may degrade at each device. Cap the ground wire from the wall if you are using a plastic back box. Attach the ground wire to the back box if using a metal back box. If a home requires a large number of WiFi Video Intercom devices, ensure that you have a robust WiFi network (possibly consisting of Figure 7. AC Power Connection multiple access points). Power Box Back Box Terminal Block Power Cable Connect Wires to Terminal Block 5 Align and bend the wires carefully to it them Figure 8. Ethernet Connection inside the back box. Align and carefully slide the power box into the back box. Ethernet Connection Back Box Secure the power box into the back box using the screws provided. Power Box NOTE: Overtightening the power box screws could result in a poor connection between the Touch Screen and the power box and could the screws provided. also cause the Touch Screen to warp. NOTE: Overtightening the power box screws Align and slide the back of the Touch Screen into could result in a poor connection between the the power box. The Touch Screen is magnetic Touch Screen and the power box and could and should snap into place easily. also cause the Touch Screen to warp. (Optional) To secure the Touch Screen inside the power box, remove the tape covering the bottom security pin (see Figure 10) before attaching the and should snap into place easily. security pin (see Figure 10) before attaching the Touch Screen to the power box. and then connect it to the power box. PoE Injector. Connect the Control4 PoE Injector to an AC outlet using the power cord. Connect one of the RJ-45 LAN ports on the gateway/router/switch to the PoE Injector’s LAN port using the RJ-45 Ethernet cable. Connect the PoE Injector’s PWR LAN-OUT port to the RJ-45 Ethernet cable that will be (Optional) To secure the Touch Screen inside the power box, remove the tape covering the bottom Connect the PoE Injector to power and the network, The steps below describe how to install a Control4 Align and slide the back of the Touch Screen into the power box. The Touch Screen is magnetic Touch Screen to the power box. Power Over Ethernet (PoE) Connection Secure the power box into the back box using Coniguration Configure for Wireless (WiFi only) Connect to a WAP on the Touch Screen (see Figure 9): Figure 9. Wireless Coniguration connected to the Touch Screen. Pull the Ethernet cable through the top back hole of the back box to the Ethernet connector on the top back of the power box, and then connect it (see Figure 8). Align and carefully slide the power box into the back box until the Touch Screen is attached to the power box. After initialization, press and hold the large White 4 in the center of the Touch Screen to enter the coniguration screen. Press the Network button on the Touch Screen’s coniguration page. The network coniguration Restore to Factory Default screen displays. Under Wireless, select Enable. If you don’t see If the camera’s LED blinks on and of for more than the network you want, select Other. 30 seconds, the device will need to be restored. At Network Name, select to add the SSID or wireless network when the keyboard appears. To access the Factory Restore switch, you’ll irst need Select Done. to remove the Touch Screen. At Security, select None, WEP 64, WEP 128, WPA, or WPA2. NOTE: If there’s tape on the bottom of the At Password, type the password on the keyboard power box, simply lift the Touch Screen of that appears. Press Done. (see Steps 3 through 6). Remove the tape to Select Connect. Notice that the IP settings lock the Touch Screen in place. If there’s no change. The IP address is set to DHCP by default. tape, the Touch Screen is locked into place. In (Optional) If you need to set a static IP address this case, follow the instructions below. instead, complete the following steps: On the Network page, press Static. Select each box one at a time and type the Locate the small hole underneath the Touch Screen’s faceplate (see Figures 10 - 13). address: IP Address, Subnet Mask, Default Gateway, Preferred DNS, and Alternate DNS. Figure 10. Touch Screen Underside - Pin and Pinhole When the keyboard appears, type the Security pin address, and then press Done. Press OK to return to the Network page. You can now connect to a Control4 Director running on a Control4 device on the network. Speaker 10 Press OK. Configure in Composer Pro Insert paper clip here to remove Touch Screen Using a small unbent paper clip, insert the paper clip straight up and into the small hole (about 1/4”) or as far as you can. There’s another small When the Touch Screen is physically installed and hole inside the Touch Screen which the paper clip appears on the home network, you can add and needs to insert into also (see Figures 11 through conigure it for the Control4 System using Composer 13). You may need to wiggle the paper clip a bit Pro. Choose the In-Wall 7” Touch Screen V2 driver in to get it into the second small hole. Composer and add it to your project. Figure 11. Locate Touch Screen Hole See the Composer Pro User Guide for information about how to add and identify the Touch Screen to Insert Paper Clip Here Bottom of Touch Screen the Control4 System. Troubleshooting Boot Up Insert Paper Clip Through this Hole Too When the device is booting up, it may take 30 seconds or longer before the Green LED turns on. When it turns on, it blinks slowly for a time and then turns of. After that, you will see an image on the Touch Screen. change on the next power up, and will initiate the Figure 12. Insert Paper Clip Through Small Hole restore process. When you are inished with the restore, reattach the Touch Screen into the power box in the wall— top irst—and then snap the bottom of the Touch Screen back into place. The Touch Screen will reboot and the factory default irmware image will be installed. All settings will reset to the factory default settings. See “LED Indicator” for information about how the LED behaves during a factory restore. After a restore, the Touch Screen will need to be updated to the same image version of the project (e.g., OS 2.2.2 or later). Figure 13. Paper Clip Needs to Engage Release Plate Warnings/Considerations WARNING! The Touch Screen must be Security plate protected by an external circuit breaker or a fuse rated at 6A maximum when used in Europe. AVERTISSEMENT! Pour réduire le risque du Pinhole feu ou de choc électrique, n’exposez pas cet appareil à la pluie ou à l’humidité. WARNING! Do not place the Touch Screen near sources of heat or expose to direct sunlight for an extended period of time. AVERTISSEMENT! Ne placez pas l’unité près des sources de chaleur ou exposition With both hands, tilt the bottom of the Touch Screen out and gently remove the Touch Screen. On the back of the Touch Screen locate the small switch (see Figure 14). pour diriger la lumière du soleil pendant une période prolongée. IMPORTANT! Do not use pens or sharp objects to navigate or make selections on the Touch Screen. To select an item or scroll Figure 14. Factory Restore Switch through a list, use your ingertip. Factory Restore Switch IMPORTANT! N’employez pas les stylos ou les objets pointus pour diriger ou pour faire des choix sur l’écran. Pour choisir un article ou un rouleau par une liste, employez votre bout du doigt. IMPORTANT! Improper use or installation can cause DAMAGE OF PROPERTY. Using the tip of a straight pin or paper clip, change the position of the switch, for example, if the switch is in the down position, push it to the up position. The Touch Screen will then sense the IMPORTANT! L’utilisation ou l’installation inexacte peut causer DAMAGE DE PROPRIÉTÉ. IMPORTANT! Using this product in a manner product until you consult your physician. other than outlined in this document voids Magnetic ields can cause damage to your warranty. Further, Control4 is NOT liable magnetic storage media (for example, credit for any damage incurred with the misuse of cards, video tapes, computer hard drives, etc). this product. See “Warranty.” Keep all magnets at least 20 inches away from IMPORTANT! Utilisant ce produit en quelque all types of magnetic media. Certain electronic sorte autre que décrit dans ce document vide devices are sensitive to magnetic votre garantie. De plus, Control4 n’est pas FIELDS and may be damaged permanently or responsable d’aucun dommage encouru avec temporarily disabled if exposed to a magnetic l’abus de ce produit. Voyez que «Warranty.» ield that is too strong. Consult the owner’s manuals of your electronic devices for further WARNING! Install in accordance with all information. INGESTED magnets can cause national, state, and local electrical serious injuries and may result in death. If CODES. magnets have been ingested (or you suspect AVERTISSEMENT! Installez selon tous les they might have been), seek competent national, état, et codes électriques locaux. medical attention immediately. WARNING! This product generates heat. The AVERTISSEMENT! Aimants! Dans l’emballage room must have adequate VENTILATION or en plastique de ce produit sont inclus des the ability to dissipate heat efectively. aimants très puissants utilisés pour attacher AVERTISSEMENT! Ce produit produit de la les plaques de surface aux boites électriques. chaleur. La salle doit avoir à VENTILATION Si quelqu’un, manipulant ou utilisant ce produit proportionnée ou la capacité d’absorber la est muni d’un pacemaker, déibrillateur ou chaleur eicacement. autre dispositif d’ordre médical, il doit éviter de se trouver à proximité (moins de 20 WARNING! This product must be grounded in pouces) de ce produit avant d’avoir consulté accordance with the National Electrical Code son médecin. Les champs magnétiques des (NEC) requirements. aimants peuvent endommager le stockage AVERTISSEMENT! Ce produit doit être fondu d’information d’ordre magnétique (ex : selon les conditions électriques nationales de cartes de crédit, bandes vidéo, disques durs code (NEC). d’ordinateur, etc.) Gardez tous les aimants au moins à 20 pouces de distance de tout type WARNING! Use this product only in dry de stockage d’information d’ordre magnétique. locations. Certains dispositifs électroniques sont AVERTISSEMENT! Employez ce produit sensibles aux champs magnétiques et peuvent seulement dans des endroits secs. être endommagés de façon permanente ou être désactivés si ils sont exposés à un CAUTION! This product is for residential use champs magnétique trop puissant. Pour plus only. d’information, consultez le manuel d’utilisateur ATTENTION! Ce produit est pour à l’usage propre à votre pièce électronique. résidentiel ou commercial seulement. SI avalés, les aimants peuvent causer des MAGNET WARNING! Located within the blessures graves et aussi causer la mort. Si plastic enclosures of this product are strong des aimants ont été avalés (ou vous doutez (rare earth) magnets that are used to qu’ils ont pu l’être) obtenez les soins médicaux attach the face plate to the electrical box. If de personnes compétentes immédiatement. someone handling or using the product has a pacemaker, deibrillator, or similar electronic device used for health purposes, avoid close proximity (closer than 20 inches) to the Third-Party Trademarks Libertas Libertas Firmware copyright statement for Touch Screens 6/26/09 About this Document Part Number: 200-00288, Rev B, 6/11/2012 Copyright (c) 2006, One Laptop per Child and Marvell Corporation. All rights reserved. Redistribution. Redistribution and use in binary form, without modiication, are permitted provided that the following conditions are met: * Redistributions must reproduce the above copyright notice and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Marvell Corporation nor the names of its suppliers may be used to endorse or promote products derived from this software without speciic prior written permission. * No reverse engineering, decompilation, or disassembly of this software is permitted. * You may not use or attempt to use this software in conjunction with any product that is ofered by a third party as a replacement, substitute or alternative to a Marvell Product where a Marvell Product is deined as a proprietary wireless LAN embedded client solution of Marvell or a Marvell Ailiate. DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. GNU GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION (Section 3.b.) You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: Accompany it with a written ofer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 on a medium customarily used for software interchange. The complete text for this license is available on the Control4 website at: http:// www.control4.com. Regulatory/Safety/Other Information To review regulatory information for your particular Control4 products, see the information located on the Control4 website at: http://www.control4.com/regulatory/. Patent Information Protected under U.S. Patents 7,335,845, 7,106,261 and licensed under U.S. Patents 5,905,442 and 5,982,103 Warranty Limited 2-year Warranty. Refer to http://www.control4.com/warranty. control4.com | ™ 10 ©2012 Control4. All rights reserved. Control4, the Control4 logo, the Control4 iQ logo and the Control4 certified logo are registered trademarks or trademarks of Control4 Corporation in the United States and/or other countries. All other names and brands may be claimed as the property of their respective owners. Regulatory Compliance & Safety Information for Contol4 Model C4-TW7C0-XX. Electrical Safety Advisory Important Safety Information Read the safety instructions before using this product. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. This equipment uses AC power which can be subjected to electrical surges, typically lightning transients which are very destructive to customer terminal equipment connected to AC power sources. The warranty for this equipment does not cover damage caused by electrical surge or lightning transients. To reduce the risk of this equipment becoming damaged it is suggested that the customer consider installing a surge arrestor. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Use the mains plug to disconnect the apparatus from the AC mains. The mains plug shall remain readily operable. 16. To completely disconnect unit power from the AC mains, disconnect the unit’s power cord from the mains socket. To reconnect power, plug the unit’s power cord into the mains socket following all safety instructions and guidelines. 17. CAUTION: As with all batteries, there is a risk of explosion or personal injury if the battery is replaced by an incorrect type. Dispose of used battery according to the instructions of the battery manufacturer and applicable environmental guidelines. Do not open, puncture or incinerate the battery, or expose it to conducting materials, moisture, liquid, fire or heat above 54° C or 130° F. 18. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. 19. This product can interfere with electrical equipment such as tape recorders, TV sets, radios, computers and microwave ovens if placed in close proximity. The lightning flash and arrow head within the triangle is a warning sign alerting you of dangerous voltage inside the product Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. See marking on bottom / back of product Warning!: To reduce the risk of electrical shock, do not expose this apparatus to rain or moisture AVERTISSEMENT! Pour réduire le risque de choc électrique, n'exposez pas cet appareil à la pluie ou à l'humidité. WARNUNG! Um das Risiko des elektrischen Schlages zu verringern, setzen Sie diesen Apparat nicht Regen oder Feuchtigkeit aus. Save these instructions Compliance of this equipment is confirmed by the following label that is placed on the equipment: USA & Canada Compliance FCC Part 15, Subpart B / ICES-003Unintentional Emissions Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules and Industry Canada ICES-003. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules and Industry Canada ICES-003. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. IMPORTANT! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. IMPORTANT! Tous les changements ou modifications pas expressément approuvés par la partie responsable de la conformité ont pu vider l’autorité de l’utilisateur pour actionner cet équipement. Ferrite clamp installation. When installing a Control4® 7” In-Wall Touch Screen, also install the enclosed ferrite clamp as described in this document. Ethernet cable. Install the ferrite clamp on the Ethernet cable no farther than 6 inches from the Ethernet jack. Compliance of this equipment is confirmed by the following label that is placed on the equipment: FCC Part 15, Subpart C / RSS-210 Intentional Emissions Interference Statement Compliance of this equipment is confirmed by the following certification numbers that are placed on the equipment: Notice: The term “FCC ID:” and “IC” before the certification number signifies that FCC and Industry Canada technical specifications were met. FCC ID: R33C4TW7C0 IC: 7848A-C4TW7C0 This equipment must be installed by qualified professionals or contractors in accordance with FCC Part 15.203 & IC RSS-210, Antenna Requirements. Do not use any antenna other than the one provided with the unit. RF Radiation Exposure Statement This equipment complies with the FCC/IC radiation exposure limits set fourth for portable transmitting devices operation in an uncontrolled environment. End users must follow the specific operating instructions to satisfy RF exposure compliance. The equipment should only be used or installed at locations where there is normally at least a 20cm separation between the antenna and all persons. This transmitter must not be co-located or operation in conjunction with any other antenna or transmitter. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. European Compliance Conformity of the equipment with the guidelines below is attested by the application of the CE mark. CE Declaration of Conformity Manufacturer’s Name: Manufacturer’s Address: CONTROL4 CORPORATION 11734 S. ELECTION ROAD SUITE 200 SALT LAKE CITY UT 84020 USA EU Representative Name: CONTROL4 EMEA LIMITED EU Representative Address: UNIT3, GREEN PARK BUSINESS CENTRE SULTON-ON-THE FOREST YORK YO61 IET, UNITED KINGDOM Product Name(s): Brand: Model(s): Touch Screen Contol4 C4-TW7C0-XX Product Standard(s) to which Conformity of the Council Directive(s) is declared: EMC - 2004/108/EC “Electromagnetic Compatibility (EMC) Directive”: (Emissions) EN 55022:2010, (Immunity) EN 55024:1998, EN 301 489-1:2008, EN 301 48917:2009, EN 61000-3-2:2004 & EN 61000-3-3:2002 Safety – 206/95/EC “Low Voltage Directive (LVD)”: EN 60950-1:2006 (2nd Edition) Telecom & Radio - 1999/5/EC Radio equipment and Telecommunications Terminal Equipment (R&TTE) Directive: EN 300 328 V1.7.1 (2006-10) RoHS - 2002/95/EC Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment (EEE) & WEEE - 2002/96/EC Waste of Electrical and Electronic Equipment (EEE). We, the undersigned, hereby declare that the equipment specified above conforms to the above directives and standards. Date of Issue: June 5, 2012 Legal Representative Signature Roger Midgley Sr. Regulatory Compliance Engineer National Restrictions This product may be used in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below: Ce produit peut être utilisé dans tous les pays de l'UE (et dans tous les pays ayant transposés la directive 1999/5/CE) sans aucune limitation, excepté pour les pays mentionnés ci-dessous: Questo prodotto è utilizzabile in tutte i paesi EU (ed in tutti gli altri paesi che seguono le direttive EU 1999/5/EC) senza nessuna limitazione, eccetto per i paesii menzionati di seguito: Das Produkt kann in allen EU Staaten ohne Einschränkungen eingesetzt werden (sowie in anderen Staaten die der EU Direktive 1999/5/CE folgen) mit Außnahme der folgenden aufgeführten Staaten: France In case the product is used outdoors, the output power is restricted in some parts of the band. See Table 1 below or check http://www.arcep.fr/ for more details. Dans la cas d'une utilisation en extérieur, la puissance de sortie est limitée pour certaines parties de la bande. Voir la table ci-dessous ou visitez http://www.arcep.fr/ pour de plus amples details Table 1 Applicable Power Levels in France Location Frequency Range (MHz) Power (EIRP) Indoor (No restrictions) 2400-2483.5 100 mW (20 dBm) Outdoor 2400-2454 2454-2483.5 100 mW (20 dBm) 10 mW (10 dBm) Recycling Control4 understands that a commitment to the environment is essential for a health life and sustainable growth for future generations. We are committed to supporting the environmental standards, laws, and directives that have been put in place by various communities and countries that deal with concerns for the environment. This commitment is represented by combining technological innovation with sound environmental business decisions. WEEE Compliance Control4 is committed to meeting all requirements of the Waste Electrical and Electronic Equipment (WEEE) directive (2002/96/EC). The WEEE directive requires the manufacturers of electrical and electronic equipment who sell in EU countries: (1) label their equipment to notify customers that it needs to be recycled, and (2) provide a way for their products to be appropriately disposed of or recycled at the end of their product lifespan. For collection or recycling of Control4 products, please contact your local Control4 representative or dealer. Australia / New Zealand Compliance Compliance of this equipment is confirmed by the following label that is placed on the equipment: About this Document Copyright © 2012 Control4 Corporation. All rights reserved. Control4 and the Control4 logo are registered trademarks or trademarks of Control4 Corporation in the United States and/or other countries. Part Number 200-00292 Rev A, 6/5/2012
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2012:06:11 16:04:59-06:00 Creator : Adobe InDesign CS5 (7.0.4) Modify Date : 2012:07:09 09:17:40-06:00 Tagged PDF : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2012:07:09 09:17:40-06:00 Creator Tool : Adobe InDesign CS5 (7.0.4) Instance ID : uuid:001afd27-e051-461f-8bce-9aa079ecde83 Document ID : xmp.did:0ACACF842FFEDF118937D692DA76D4F3 Original Document ID : xmp.did:0ACACF842FFEDF118937D692DA76D4F3 Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:0ACACF842FFEDF118937D692DA76D4F3, xmp.iid:0BCACF842FFEDF118937D692DA76D4F3, xmp.iid:0CCACF842FFEDF118937D692DA76D4F3, xmp.iid:1489F3DC831AE0118BF9FD6906C95C1E, xmp.iid:1589F3DC831AE0118BF9FD6906C95C1E, xmp.iid:8C95A5246081E01182EDE0D6D7200F8E, xmp.iid:8D95A5246081E01182EDE0D6D7200F8E, xmp.iid:15D16DFD6381E01182EDE0D6D7200F8E, xmp.iid:FB8FD41C6481E01182EDE0D6D7200F8E, xmp.iid:7A5291696881E01182EDE0D6D7200F8E, xmp.iid:8246ED8F6881E01182EDE0D6D7200F8E, xmp.iid:D35218F06981E01182EDE0D6D7200F8E, xmp.iid:79B2401F6F81E01182EDE0D6D7200F8E, xmp.iid:5B0115686F81E01182EDE0D6D7200F8E, xmp.iid:FF9145886F81E01182EDE0D6D7200F8E, xmp.iid:E3A099B37681E01182EDE0D6D7200F8E, xmp.iid:C277F83C7981E01182EDE0D6D7200F8E, xmp.iid:188E14F20F83E0118F95C1409EBD081B, xmp.iid:198E14F20F83E0118F95C1409EBD081B, xmp.iid:A1470A978F85E011863FCA04DAE23FD2, xmp.iid:20EB2EB0DD8BE01198859FBD9A6E9BD9, xmp.iid:47B7E82F678CE01182D6BD1B4F228C67, xmp.iid:32900A5F688CE01182D6BD1B4F228C67, xmp.iid:50FEB5A1688CE01182D6BD1B4F228C67, xmp.iid:51FEB5A1688CE01182D6BD1B4F228C67, xmp.iid:52FEB5A1688CE01182D6BD1B4F228C67, xmp.iid:0611624D6C8CE01182D6BD1B4F228C67, xmp.iid:4DE9D4806C8CE01182D6BD1B4F228C67, xmp.iid:C02D83206F8CE01182D6BD1B4F228C67, xmp.iid:4C530E0E2D91E011A58AD6E4065D3318, xmp.iid:7FF272D7AF9EE0119E7396B491ABE45B, xmp.iid:C4D8F072B29EE0119E7396B491ABE45B, xmp.iid:BC934A0CB39EE0119E7396B491ABE45B, xmp.iid:7C48C89F1FA4E011927E92924CE5DCF9, xmp.iid:C982FBC96AA6E0118F26B01FFEEE2D4D, xmp.iid:F850EE386BA6E0118F26B01FFEEE2D4D, xmp.iid:F5BDD59D1FA8E011BB1BFC7392F94515, xmp.iid:D377EAB71FA8E011BB1BFC7392F94515, xmp.iid:9C59DBE2D4ABE0118FFFA8F59E68461B, xmp.iid:19036DF3D7ABE0118FFFA8F59E68461B, xmp.iid:EA05C39DDEABE0118FFFA8F59E68461B, xmp.iid:BA54147FEDABE0118FFFA8F59E68461B, xmp.iid:0AB2EA52EEABE0118FFFA8F59E68461B, xmp.iid:E142C7FBF5ABE0118FFFA8F59E68461B, xmp.iid:95364A1EF7ABE0118FFFA8F59E68461B, xmp.iid:807E9BCCF7ABE0118FFFA8F59E68461B, xmp.iid:EC16A73DFFABE0118997E558844C9305, xmp.iid:312070C000ACE0118997E558844C9305, xmp.iid:A3F3709502ACE0118997E558844C9305, xmp.iid:A8B6128003ACE0118997E558844C9305, xmp.iid:EB7254C703ACE0118997E558844C9305, xmp.iid:24D4BBD753AEE011A7DEE93DBB9ED62A, xmp.iid:F4841C8F55AEE011A7DEE93DBB9ED62A, xmp.iid:0747C6A657AEE011A7DEE93DBB9ED62A, xmp.iid:32F6B20258AEE011A7DEE93DBB9ED62A, xmp.iid:535FAD00F2AEE011A560B76C2A95BE77, xmp.iid:92F545D9F2AEE011A560B76C2A95BE77, xmp.iid:3A82BF76F6AEE011A560B76C2A95BE77, xmp.iid:32CCBA86F6AEE011A560B76C2A95BE77, xmp.iid:1794AC9EF6AEE011A560B76C2A95BE77, xmp.iid:D739BCC1FAAEE011A560B76C2A95BE77, xmp.iid:57FE12A08DB1E01181BAB3F8F2D8177A, xmp.iid:C022CB9F36B2E011BFF6E83F7D28B523, xmp.iid:BD1AF7827DB4E0118512E933DFF692D5, xmp.iid:348348DF7FB4E0118512E933DFF692D5, xmp.iid:7E10B63A80B4E0118512E933DFF692D5, xmp.iid:0A6FC8D0D6B6E011B345B3789AFD0D64, xmp.iid:F4744113D7B6E011B345B3789AFD0D64, xmp.iid:94F174C5D7B6E011906FEC627B8C37B0, xmp.iid:8F57003530BDE0119324AC0442BDFCB3, xmp.iid:566E309630BDE0119324AC0442BDFCB3, xmp.iid:A857C76598CDE0118D31DFC32D2B04FA, xmp.iid:FB6089B598CDE0118D31DFC32D2B04FA, xmp.iid:96EC86BFA1CDE0118D31DFC32D2B04FA, xmp.iid:AFC7F2020CD0E011A14AF30EB16A252B, xmp.iid:29C2CFFC1CD0E011A14AF30EB16A252B, xmp.iid:5F07F714C4D8E011903AED9B94062982, xmp.iid:0632D221C4D8E011903AED9B94062982, xmp.iid:497A611797E0E011BB8DA71286090134, xmp.iid:B7E2A21A9AE0E011BB8DA71286090134, xmp.iid:428DAAF962E4E011A4C9BEB3845A924D, xmp.iid:8FE18BB964E4E011A4C9BEB3845A924D, xmp.iid:3177F73E99E4E011A4C9BEB3845A924D, xmp.iid:572DFC3AA6E4E011A4C9BEB3845A924D, xmp.iid:9B5FFBD833E5E0119A34B940A3C7381C, xmp.iid:D948385144E5E0119A34B940A3C7381C, xmp.iid:4C18386946E5E0119A34B940A3C7381C, xmp.iid:D8936A0248E5E0119A34B940A3C7381C, xmp.iid:29A1C81248E5E0119A34B940A3C7381C, xmp.iid:4373444448E5E0119A34B940A3C7381C, xmp.iid:8FAE66C148E5E0119A34B940A3C7381C, xmp.iid:17749FD748E5E0119A34B940A3C7381C, xmp.iid:011F2AF848E5E0119A34B940A3C7381C, xmp.iid:3117E54749E5E0119A34B940A3C7381C, xmp.iid:1537588449E5E0119A34B940A3C7381C, xmp.iid:8C259EA649E5E0119A34B940A3C7381C, xmp.iid:A07F19AE49E5E0119A34B940A3C7381C, xmp.iid:972101E749E5E0119A34B940A3C7381C, xmp.iid:5584F77A4AE5E0119A34B940A3C7381C, xmp.iid:4EDA40A74AE5E0119A34B940A3C7381C, xmp.iid:14C8800D4BE5E0119A34B940A3C7381C, xmp.iid:E7ABA26D4BE5E0119A34B940A3C7381C, xmp.iid:F49442164FE5E0119A34B940A3C7381C, xmp.iid:A84D71C6FFE5E011950FE7EADEB48062, xmp.iid:9424AEF3FFE5E011950FE7EADEB48062, xmp.iid:22196E8B55E8E0118BB0ED9E41AA31FB, xmp.iid:B73AB5A357E8E0118BB0ED9E41AA31FB, xmp.iid:EA2E163058E8E0118BB0ED9E41AA31FB, xmp.iid:DA7E087B90E8E0118BB0ED9E41AA31FB, xmp.iid:F18B3F4234E9E01197BBD841D551F1DA, xmp.iid:FC796E6643E9E01197BBD841D551F1DA, xmp.iid:B78BB4BD44E9E01197BBD841D551F1DA, xmp.iid:103F3F0CFFE9E011AEF8D1D9AF8C6BD0, xmp.iid:EDB4E88B01EAE011AEF8D1D9AF8C6BD0, xmp.iid:C43A15A902EAE011AEF8D1D9AF8C6BD0, xmp.iid:CDE1D72E04EAE011AEF8D1D9AF8C6BD0, xmp.iid:FA3FD05304EAE011AEF8D1D9AF8C6BD0, xmp.iid:F159C26604EAE011AEF8D1D9AF8C6BD0, xmp.iid:DEC55F6B09EAE011AEF8D1D9AF8C6BD0, xmp.iid:CDE0F2D109EAE011AEF8D1D9AF8C6BD0, xmp.iid:A90ADF0B0AEAE011AEF8D1D9AF8C6BD0, xmp.iid:CC369A200AEAE011AEF8D1D9AF8C6BD0, xmp.iid:F8887B6DE700E1118B67A68597AD7946, xmp.iid:75E401F1E700E1118B67A68597AD7946, xmp.iid:2F7207380904E111BFDA83AD0AC9A5C7, xmp.iid:19A8F2729B04E11187CDF74F5E221F59, xmp.iid:CBC2F76F170FE1119146D20C479F6D23, xmp.iid:79F6B94CB10FE11180C692BC563E53E4, xmp.iid:F7EA4F6BB10FE11180C692BC563E53E4, xmp.iid:4E542C33B60FE11180C692BC563E53E4, xmp.iid:201193DDB70FE11180C692BC563E53E4, xmp.iid:5630FD05B90FE11180C692BC563E53E4, xmp.iid:9DE9E518BE0FE11180C692BC563E53E4, xmp.iid:F1013F74C00FE11180C692BC563E53E4, xmp.iid:0D49F61DC40FE11180C692BC563E53E4, xmp.iid:57A143FBC60FE11180C692BC563E53E4, xmp.iid:DB1C7A22CC0FE11180C692BC563E53E4, xmp.iid:1A03AB79CC0FE11180C692BC563E53E4, xmp.iid:7717A828D60FE11180C692BC563E53E4, xmp.iid:02CAFC3AD70FE11180C692BC563E53E4, xmp.iid:5A6B46BCD70FE11180C692BC563E53E4, xmp.iid:DC67A023D80FE1119559A2334D9AABE5, xmp.iid:C7225D219426E1118E80AC3828B036C8, xmp.iid:33C260319D26E1118E80AC3828B036C8, xmp.iid:D6A1651D9E26E1118E80AC3828B036C8, xmp.iid:AB3C10365E36E111AF36FBDCC71D499A, xmp.iid:CD7D96052937E111A7EDF832CDA786F7, xmp.iid:3D5647A59B3CE111AD25B283158D5312, xmp.iid:1543FEFC9B3CE111AD25B283158D5312, xmp.iid:4192A2B2E646E111B6A3C597B2F3C1E1, xmp.iid:9ADB3B98EB46E111B6A3C597B2F3C1E1, xmp.iid:70CD23427047E111A7B29F42B482A4B5, xmp.iid:88279B957047E111A7B29F42B482A4B5, xmp.iid:D767FE63FC4DE111878DF7B69095E095, xmp.iid:8CBEE35A844EE1119D22E125EE5C8CDB, xmp.iid:FCD537D0854EE1119D22E125EE5C8CDB, xmp.iid:7734EED28652E111846EAD22974818AA, xmp.iid:0C271E3AA652E11188958D4A4E03A5AC, xmp.iid:0D271E3AA652E11188958D4A4E03A5AC, xmp.iid:37B4B86AA652E11188958D4A4E03A5AC, xmp.iid:38B4B86AA652E11188958D4A4E03A5AC, xmp.iid:1273DF891B67E111898CD86CADEE6801, xmp.iid:BF4007E31B67E111898CD86CADEE6801, xmp.iid:780D633A1C67E111898CD86CADEE6801, xmp.iid:50525D229A6CE111B374F74803605AD0, xmp.iid:77CE0811236DE111AB198649AFEC0782, xmp.iid:18B1DA54236DE111AB198649AFEC0782, xmp.iid:C93ACE4B2E6DE111AB198649AFEC0782, xmp.iid:A693B5E4496DE111AB198649AFEC0782, xmp.iid:D99FD164DB71E111849D982D4573C214, xmp.iid:F241A95EDF71E111849D982D4573C214, xmp.iid:68B3F580E471E111849D982D4573C214, xmp.iid:3D0E5090ED71E111849D982D4573C214, xmp.iid:B51EA0ADEE71E111849D982D4573C214, xmp.iid:990B4E466D74E1118DF4AEC49661947E, xmp.iid:0BC83CC56D74E1118DF4AEC49661947E, xmp.iid:DF2E8D73D08FE111955FD27C806D797C, xmp.iid:0F8DE91F6A98E1118727872090C23517, xmp.iid:15DC5F1A6F98E1118727872090C23517, xmp.iid:CE44BE3C7E98E1118727872090C23517, xmp.iid:EF09A1BC9898E111BA38BC9D24AF8797, xmp.iid:E551CA209998E111BA38BC9D24AF8797, xmp.iid:41A258549998E111BA38BC9D24AF8797, xmp.iid:D7AE7CAD9998E111BA38BC9D24AF8797, xmp.iid:1E70ADAA2299E111A23BC9F889F08099, xmp.iid:06F13A152699E111A23BC9F889F08099, xmp.iid:92AF1FB12699E111A23BC9F889F08099, xmp.iid:0CA604E82699E111A23BC9F889F08099, xmp.iid:D5F18D212799E111A23BC9F889F08099, xmp.iid:381B2DAC2799E111A23BC9F889F08099, xmp.iid:49A652DF2799E111A23BC9F889F08099, xmp.iid:1BB4DDD81BACE111BDADA69FC58E18F0, xmp.iid:31C90CD71CACE111BDADA69FC58E18F0, xmp.iid:1DCC007E65AEE1119C7E8F8A11E1196C, xmp.iid:922E724969AEE1119C7E8F8A11E1196C, xmp.iid:4F23AAA86DAEE1119C7E8F8A11E1196C, xmp.iid:1039F63675AEE1119C7E8F8A11E1196C, xmp.iid:C2F252BA75AEE1119C7E8F8A11E1196C, xmp.iid:320BD05776AEE1119C7E8F8A11E1196C, xmp.iid:C55AF6C72BAFE1119BB58F6EC54452F6, xmp.iid:520DA38A33AFE1119BB58F6EC54452F6, xmp.iid:9D4C469120B0E111827ADCC046181039, xmp.iid:C72A54C9B9B0E111B1038F59CDF933C3, xmp.iid:CA7739C6CAB0E111B1038F59CDF933C3, xmp.iid:4EEA3D24CFB0E111B1038F59CDF933C3, xmp.iid:D09264580DB4E1119570D1CD37120D1B, xmp.iid:0CB29BE710B4E1119570D1CD37120D1B, xmp.iid:A6F1787011B4E1119570D1CD37120D1B History When : 2010:12:02 09:16:28-07:00, 2010:12:02 09:22:45-07:00, 2010:12:02 09:22:45-07:00, 2011:01:07 10:37:36-07:00, 2011:01:07 10:37:36-07:00, 2011:05:18 09:04:35-06:00, 2011:05:18 09:04:35-06:00, 2011:05:18 09:32:07-06:00, 2011:05:18 09:33-06:00, 2011:05:18 10:03:46-06:00, 2011:05:18 10:04:51-06:00, 2011:05:18 10:14:42-06:00, 2011:05:18 10:51:48-06:00, 2011:05:18 10:53:50-06:00, 2011:05:18 10:54:44-06:00, 2011:05:18 11:46:04-06:00, 2011:05:18 12:04:13-06:00, 2011:05:20 12:35:33-06:00, 2011:05:20 12:35:49-06:00, 2011:05:23 16:54:18-06:00, 2011:05:31 17:28:28-06:00, 2011:06:01 09:52:43-06:00, 2011:06:01 10:01:12-06:00, 2011:06:01 10:03:03-06:00, 2011:06:01 10:04:30-06:00, 2011:06:01 10:05:49-06:00, 2011:06:01 10:29:20-06:00, 2011:06:01 10:30:46-06:00, 2011:06:01 10:49:33-06:00, 2011:06:07 11:39:11-06:00, 2011:06:24 16:18:09-06:00, 2011:06:24 16:36:49-06:00, 2011:06:24 16:41:06-06:00, 2011:07:01 14:20:55-06:00, 2011:07:04 12:24-06:00, 2011:07:04 12:27:06-06:00, 2011:07:06 16:30:56-06:00, 2011:07:06 16:31:40-06:00, 2011:07:11 09:46:04-06:00, 2011:07:11 10:08:01-06:00, 2011:07:11 10:55:43-06:00, 2011:07:11 12:42:14-06:00, 2011:07:11 12:48:10-06:00, 2011:07:11 13:43-06:00, 2011:07:11 13:51:07-06:00, 2011:07:11 13:55:59-06:00, 2011:07:11 14:49:16-06:00, 2011:07:11 15:00:05-06:00, 2011:07:11 15:13:11-06:00, 2011:07:11 15:19:45-06:00, 2011:07:11 15:21:45-06:00, 2011:07:14 13:59:54-06:00, 2011:07:14 14:12:11-06:00, 2011:07:14 14:27:10-06:00, 2011:07:14 14:29:44-06:00, 2011:07:15 08:52:03-06:00, 2011:07:15 08:58:07-06:00, 2011:07:15 09:23:59-06:00, 2011:07:15 09:24:26-06:00, 2011:07:15 09:25:06-06:00, 2011:07:15 09:54:43-06:00, 2011:07:18 16:31:05-06:00, 2011:07:19 12:40:50-06:00, 2011:07:22 10:13:18-06:00, 2011:07:22 10:30:12-06:00, 2011:07:22 10:32:45-06:00, 2011:07:25 09:57:36-06:00, 2011:07:25 09:59:27-06:00, 2011:07:25 10:04:26-06:00, 2011:08:02 11:52:36-06:00, 2011:08:02 11:55:19-06:00, 2011:08:23 08:58:44-06:00, 2011:08:23 09:00:58-06:00, 2011:08:23 10:05:40-06:00, 2011:08:26 11:51:22-06:00, 2011:08:26 13:52:54-06:00, 2011:09:06 14:09:09-06:00, 2011:09:06 14:09:31-06:00, 2011:09:16 13:07:15-06:00, 2011:09:16 13:28:49-06:00, 2011:09:21 09:04:16-06:00, 2011:09:21 09:16:48-06:00, 2011:09:21 15:32:45-06:00, 2011:09:21 17:05:42-06:00, 2011:09:22 09:59:26-06:00, 2011:09:22 11:57:20-06:00, 2011:09:22 12:12:19-06:00, 2011:09:22 12:23:46-06:00, 2011:09:22 12:24:13-06:00, 2011:09:22 12:25:36-06:00, 2011:09:22 12:29:06-06:00, 2011:09:22 12:29:43-06:00, 2011:09:22 12:30:38-06:00, 2011:09:22 12:32:52-06:00, 2011:09:22 12:34:33-06:00, 2011:09:22 12:35:31-06:00, 2011:09:22 12:35:43-06:00, 2011:09:22 12:37:19-06:00, 2011:09:22 12:41:27-06:00, 2011:09:22 12:42:41-06:00, 2011:09:22 12:45:33-06:00, 2011:09:22 12:48:14-06:00, 2011:09:22 13:14:25-06:00, 2011:09:23 10:19:12-06:00, 2011:09:23 10:20:28-06:00, 2011:09:26 09:38:13-06:00, 2011:09:26 09:53:12-06:00, 2011:09:26 09:57:08-06:00, 2011:09:26 16:40:05-06:00, 2011:09:27 12:12:28-06:00, 2011:09:27 14:00:51-06:00, 2011:09:27 14:10:27-06:00, 2011:09:28 12:24:05-06:00, 2011:09:28 12:41:58-06:00, 2011:09:28 12:49:56-06:00, 2011:09:28 13:00:50-06:00, 2011:09:28 13:01:52-06:00, 2011:09:28 13:02:24-06:00, 2011:09:28 13:38:19-06:00, 2011:09:28 13:41:11-06:00, 2011:09:28 13:42:49-06:00, 2011:09:28 13:43:23-06:00, 2011:10:27 16:02:57-06:00, 2011:10:27 16:06:37-06:00, 2011:10:31 15:42:23-06:00, 2011:11:01 09:09:09-06:00, 2011:11:14 16:21:53-07:00, 2011:11:15 10:43:16-07:00, 2011:11:15 10:44:08-07:00, 2011:11:15 11:18:21-07:00, 2011:11:15 11:30:16-07:00, 2011:11:15 11:38:34-07:00, 2011:11:15 12:14:53-07:00, 2011:11:15 12:31:45-07:00, 2011:11:15 12:57:58-07:00, 2011:11:15 13:18:29-07:00, 2011:11:15 13:55:22-07:00, 2011:11:15 13:57:48-07:00, 2011:11:15 15:07:07-07:00, 2011:11:15 15:14:48-07:00, 2011:11:15 15:18:24-07:00, 2011:11:15 15:21:18-07:00, 2011:12:14 13:42:25-07:00, 2011:12:14 14:47:17-07:00, 2011:12:14 14:53:53-07:00, 2012:01:03 15:56:46-07:00, 2012:01:04 16:08:32-07:00, 2012:01:11 14:31:38-07:00, 2012:01:11 14:34:06-07:00, 2012:01:24 16:54:05-07:00, 2012:01:24 17:29:08-07:00, 2012:01:25 09:18:46-07:00, 2012:01:25 09:21:07-07:00, 2012:02:02 17:17-07:00, 2012:02:03 09:30:16-07:00, 2012:02:03 09:40:42-07:00, 2012:02:08 11:58:01-07:00, 2012:02:08 15:42:49-07:00, 2012:02:08 15:43:14-07:00, 2012:02:08 15:44:10-07:00, 2012:02:08 15:46:22-07:00, 2012:03:05 16:32:57-07:00, 2012:03:05 16:35:26-07:00, 2012:03:05 16:37:53-07:00, 2012:03:12 17:21:45-06:00, 2012:03:13 09:41:57-06:00, 2012:03:13 09:43:51-06:00, 2012:03:13 11:02:20-06:00, 2012:03:13 14:19:53-06:00, 2012:03:19 09:51:30-06:00, 2012:03:19 10:19:57-06:00, 2012:03:19 10:56:42-06:00, 2012:03:19 12:01:34-06:00, 2012:03:19 12:09:32-06:00, 2012:03:22 16:20:47-06:00, 2012:03:22 16:24:20-06:00, 2012:04:26 12:48:45-06:00, 2012:05:07 11:28:56-06:00, 2012:05:07 12:04:34-06:00, 2012:05:07 13:52:55-06:00, 2012:05:07 17:02:36-06:00, 2012:05:07 17:05:24-06:00, 2012:05:07 17:06:51-06:00, 2012:05:07 17:09:20-06:00, 2012:05:08 09:29:56-06:00, 2012:05:08 09:54:24-06:00, 2012:05:08 09:58:45-06:00, 2012:05:08 10:00:17-06:00, 2012:05:08 10:01:54-06:00, 2012:05:08 10:05:46-06:00, 2012:05:08 10:07:12-06:00, 2012:06:01 12:59-06:00, 2012:06:01 13:06:06-06:00, 2012:06:04 10:51:12-06:00, 2012:06:04 11:18:22-06:00, 2012:06:04 11:49:40-06:00, 2012:06:04 12:43:45-06:00, 2012:06:04 12:47:25-06:00, 2012:06:04 12:51:50-06:00, 2012:06:05 10:30:37-06:00, 2012:06:05 11:26:10-06:00, 2012:06:06 15:42:52-06:00, 2012:06:07 09:59:39-06:00, 2012:06:07 12:01:15-06:00, 2012:06:07 12:32:31-06:00, 2012:06:11 15:35:20-06:00, 2012:06:11 16:00:49-06:00, 2012:06:11 16:04:39-06:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /, /metadata, /, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Doc Change Count : 32094 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 16EXIF Metadata provided by EXIF.tools