Coulisse ABC06 Tubular Motor User Manual ABC 0607MC A R0 indd

Download:
Mirror Download [FCC.gov]
Document ID	1743904
Application ID	7VkSvkOfwuDBT93MmOLsFQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	102.96kB (1286949 bits)
Date Submitted	2012-07-15 00:00:00
Date Available	2012-07-15 00:00:00
Creation Date	2012-05-29 10:51:04
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2012-07-12 15:37:17
Document Title	ABC-0607MC-A_R0.indd
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Irene

1.3 Motor assembly Roller 42/50mm
Assembly Manual
AC Tubular motors
ABC-06, -07 - MC
RCU-29-ABC
ph1
1.3A
1.3B
1. Assembly
1.1 Compatibility and adapters
Motor
1.3C
ABC-06/ABC-07
System:
Roller
Roller
Roller
Roller
42mm
50mm
65mm
80mm
Tube:
Drive plug:
Adapter:
RTU-42
RTU-50
RTU-65
RTU-80
RCU-29-ABC
RCU-29-ABC
RCU-30-ABC
RCU-31-ABC
no adapters
no adapters
RCU-13
RCU-14
1.3D
1.3E
1.4 Motor assembly Roller 65/80mm
RCU-30/31/32/33-ABC
RCU-13/14
ph1
1.2 Component overview
Drive plugs:
RCU-29-ABC
RCU-30-ABC
RCU-32-ABC
RCU-31-ABC
RCU-13-ABC
RCU-14
RCU-14-ABC
1.4A
1.4B
1.4C
1.4D
RCU-33-ABC
Adapters:
RCU-13
Tubes:
ph1
RTU-42
RTU-50
RTU-65
RTU-80
1.4F
1.4G
ABC-0607-A_R1_GB1
1.4E
User Manual
AC Tubular motors
ABC-06, -07 - MC(120)
3. Position adjustment
1. Upper position
Turn the switch upwards and turn the white or red screw until
the blind has reached the upper position (select the white or
red screw depending on the position of the motor in the blind;
you need to rst test this in order to make the selection).
The upper position is now set.
2. Lower position
Turn the switch downwards and turn the white or red screw
until the blind has reached the lower position (select the white
or red screw depending on the position of the motor in the blind;
you need to rst test this in order to make the selection).
The lower position is now set.
WARNING:
Important safety instructions. Follow all instructions,
since incorrect installation can lead to severe injury.
WARNING:
Do not make repairs yourself. Do not attempt to open the device
or disassemble it. You run the risk of electric shock and voiding
the limited warranty. No user-serviceable parts are inside.
3. Changing positions:
By turning the red or the white screw to the right (+) or to the left
you can respectively enlarge the end position or make it smaller.
indoor use only
Upper position
Included adjuster
1. General information
White adjuster screw
The ABC-06-MC(120), ABC-07-MC(120) are tubular motors to motorize Coulisse Absolute Roller.
The tubular motors are compatible with Coulisse tubes and makes it possible
to operate your blind motorised with minimum noise.
Lower position
Red adjuster screw
Switch
1.1 General dimensions
L1
Ø D1
L2
4. Tips & Troubleshooting
L3
Please check www.coulisse.nl for the latest tips and troubleshooting guide
Type
L1
L2
ABC-06/07-MC(120)
475
L3
17
Ø D1
460
5. Safety & Cleaning
40
WARNING:
1.2 Performances
Type
Power supply
ABC-06-MC
ABC-07-MC
ABC-06-MC(120)
ABC-07-MC(120)
Rated power
230V AC 50Hz
230V AC 50Hz
120V AC 60Hz
120V AC 60Hz
Torq - rpm
0.53A - 121W
0.53A - 121W
0.85A - 102W
0.89A - 92W
5Nm - 30 rpm
10Nm - 15 rpm
6Nm - 33 rpm
10Nm - 21 rpm
Max.
revolutions
Weight
[gram]
IP
30
30
30
30
1750
1750
1750
1750
44
44
44
44
Do not make repairs yourself. Do not attempt to open the device
or disassemble it. You run the risk of electric shock and voiding
the limited warranty. No user-serviceable parts are inside.
Do not let children play with the blind and/or remote control.
Only use powersupplies or batteries that comply with the
cations
speci on the motor.
In case of malfunction, unplug the device or remove the batteries and contact your dealer.
Take care that the blind can move freely and is not blocked by objects.
Take care that the powersupply cable is out of reach for children.
Do not paint the device.
Keep the device dry.
Follow these general rules when cleaning the outside of the device and its components:
General
Max. operating time
Operating Temp.
Len gth w ire
4 min.
5 - 60°C
2 m tr
- Make sure the device is unplugged.
- Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.
- Don’t use aerosol sprays, solvents, alcohol, or abrasives.
6. Service & Support
WARNING:
1.3 Compatibility
Type
Roller
A B C -0 6 -M C (12 0 )
ABC-07-MC(120)
Venetian
42, 50, 65, 80m m
42, 50, 65, 80mm
Other
50mm tilt and lift
Do not make repairs yourself. Do not attempt to open the device
or disassemble it. You run the risk of electric shock and voiding
the limited warranty. No user-serviceable parts are inside.
Online Resources
For the latest information and updated manuals go to www.coulisse.nl.
ro m an
roman
Obtaining Warranty Service
First follow the advice in this booklet and then go to your local dealer.
If the product appears to be damaged or does not function properly, go to your local dealer
for instructions on how to obtain warranty service.
2. Connecting diagram
IMPORTANT:
When the mains cable is permanently connected, a readily accessible disconnect
device shall be incorporated external to the motor.
When there is a pluggable connecter installed on the mains cable, the socket-outlet
shall be installed near the motor and shall be easily accessible.
Attention:
1. Do not wire two or more motors to one single pole switch or relay.
2. Do not control one motor from several locations without using a proper controller.
3. Do not connect the brown wire and the black wire at the same time
to the powersource, this may permanently damage the motor.
Disclaimer:
© Copyright Coulisse
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted,
by any means,
in any form,
electronic, mechanical, photocopying, recording, digital
MS 1
230V
120V
Neutral (1)
Direction 1 (2)
Direction 2 (3)
Ground (4)
Blue
Brown
Black
Green/Yellow
White
Red
Black
Green
or otherwise without the written permission of the publisher.
Although this manual has been composed with the most care, Coulisse B.V. does not accept
any responsibility for damage due
to mistakes and/or faults in this manual.
Coulisse B.V. reserves the right to revise the manual and to revise and/or changes its content at any time, without
to notify
obligation
any person or entity of such revisions or changes.
The most recent version replaces older versions of this manual. The most recent version is available at ww.coulisse.com
act
or cont
your Coulisse contact person .
We invite you to send remarks and comments about this manual to Coulisse at manuals@coulisse.com.
Coulisse B.V., Vonderweg 48, 7468 DC Enter, The Netherlands
FCC STATEMENT
1.This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
2.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
ABC-0607MC-U_R1_ GB1
Mains cable
M S2
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Irene
Create Date                     : 2012:05:29 10:51:04+08:00
Modify Date                     : 2012:07:12 15:37:17+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2012:07:12 15:37:17+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : ABC-0607MC-A_R0.indd
Creator                         : Irene
Document ID                     : uuid:66b24dc0-2bec-4cd0-806e-8dda8e71e0ae
Instance ID                     : uuid:cd31e37c-a492-4abd-ae4e-f5eb83fafce3
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Page Count                      : 3
For                             : Administrator,
Bounding Box                    : 42 1 734 1130
Container Version               : 11
Creator Version                 : 14
Image Height                    : 1129
Image Width                     : 692
Image Size                      : 692x1129
Megapixels                      : 0.781

EXIF Metadata provided by EXIF.tools