Coulisse ABC23 Curtain Motor User Manual CBB5C3F7CAE92E706466

Download:
Mirror Download [FCC.gov]
Document ID	1770281
Application ID	yW08G1IoTb/GWTlGIIKuTA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	225.65kB (2820575 bits)
Date Submitted	2012-08-20 00:00:00
Date Available	2012-08-20 00:00:00
Creation Date	2012-08-15 14:13:42
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2012-08-16 16:01:46
Document Title
Document Creator	Adobe InDesign CS4 (6.0.6)
Document Author:	dell

User manual
Curtain Motor
ABC-23-W120
2.2 Operating
2. Programming and operating
3. Tips & Troubleshooting
- Control by remote (see manual remote control)
- Manual Control (by pulling)
2.1 First use
Please check www.coulisse.com for the latest tips and troubleshooting guide.
Step 1: Connect the motor with the powersupply
Step 2: Set the curtain in program-mode by pushing the program button
(also possible by using ‘SingleSelect’, see manual remote control*)
4. Safety & Cleaning
4.1 Safety
Pull curtain
to start the motor
Set to program mode:
Shortly press
program button
WARNING:
Curtain moves
to end limit
- Manual Control (by button)
Program mode:
Curtain is
stepping...
Step 3: Pair the curtain to a channel/remote
Do not make repairs yourself. Do not attempt to open the device
or disassemble it. You run the risk of electric shock and voiding
the limited warranty. No user-serviceable parts are inside.
Do not let children play with the curtain and/or remote control.
Only use powersupplies or batteries that comply with the specications on the motor.
In case of malfunction, unplug the device or remove the batteries and contact your dealer.
Take care that the curtain can move freely and is not blocked by objects.
Take care that the powersupply cable is out of reach for children.
Do not paint the device.
Keep the device dry.
4.2 Cleaning
Action conrmed:
curtain stops stepping
for 3 seconds
WARNING:
Important safety instructions. Follow all instructions,
since incorrect installation can lead to severe injury.
WARNING:
Do not make repairs yourself. Do not attempt to open the device
or disassemble it. You run the risk of electric shock and voiding
the limited warranty. No user-serviceable parts are inside.
Choose channel
by pressing
the ChannelSelect button
Pair/unpair by pressing
the program button on the
backside of the remote
Hold program button
for more than 2 sec.
Curtain moves
as long as button is
pressed (max. 15 sec.)
For moving in opposite
direction release button
and hold program button
again for more than 2 sec.
5. Service & Support
2.3 Direct take over
From factory default ‘Direct take over’ is activated. A motor will take over the command
directly and runs to it’s endlimit. Switch this function off when it is recommended that
the motor must move in small steps.
Step 4: Switch the rotating direction
indoor use only
The ABC-23 is a curtain motor to motorize curtain tracks. The motor can be operated
with a coulisse remote control or manually by pulling on the curtain. Limits and favorite
position are set with the remote control.
1.1 General dimensions
Action conrmed:
curtain stops stepping
for 3 seconds
5 sec
Shortly press
program button
Press the left + right
to change the rotation direction
250
WARNING:
Do not make repairs yourself. Do not attempt to open the device
or disassemble it. You run the risk of electric shock and voiding
the limited warranty. No user-serviceable parts are inside.
Online Resources
For the latest information and updated manuals go to www.coulisse.com.
If you press left and
the curtain goes right,
the rotation direction
of the curtain has
to be switched.
1. General information
Follow these general rules when cleaning the outside of the device and its components:
- Make sure the device is unplugged.
- Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.
- Don’t use aerosol sprays, solvents, alcohol, or abrasives.
Program mode:
Blind is
stepping...
Obtaining Warranty Service
First follow the advice in this booklet and then go to your local dealer.
If the product appears to be damaged or does not function properly, go to your local dealer
for instructions on how to obtain warranty service.
Hold program button
untill blind
stops stepping (5 sec. )
2.4 Reset
- Reset to factory defaults
52
Step 5: Set endpositions
First set the left endposition
15
220
70
10 sec
2.
Type
Power Supply
Rated Power
Torq-Speed
Curtain weight
ABC-23-W
ABC-23-W120
230V AC 50Hz
120V AC 60Hz
0.23A - 45W
0.46A - 45W
0,8Nm, 20 cm/s
0,8Nm, 24 cm/s
50kg
50kg
Type
Max operating
time
Operating temp.
Max. channels
to pair
Deg. of
protection
4 min.
5 - 60°
32 channels
IP20
ABC-23-W & W(120)
Use the left and right
buttons to go to
the left endposition
Action conrmed:
curtain stops stepping
for 3 seconds
1.
1.2 Performances
Set the position
by pressing
the center + left button
Shortly press program
button
Program mode:
is stepping...
Hold program button
untill curtain stops stepping
for the second time (ca. 10 sec.)
- Reset to factory defaults & Erase all paired channels/remotes
Then set the right endposition
1.2A
1.
2.
1.3 Connectors and buttons
Use the left and right
buttons to go to
the right endposition
Action conrmed:
curtain stops stepping
for 3 seconds
Set the position
by pressing
the center + right button
Step 6: Exit the program-mode by pressing the program button again
Program button
1.3A
15 sec
Shortly press program
button
Program mode:
is stepping...
Hold program button
untill curtain stops stepping
and steps once (ca. 15 sec.)
2.5 Additional curtain settings
Additional curtain settings:
Available
Switch rotation direction
Favorite position
Domotica Box
Yes
Yes
Yes
We refer to the manual of the Coulisse Remote control to set the additional curtain settings.
Mains cable
Neutral
Phase
Ground
230V
120V
Blue
Brown
Yellow-green
White
Black
Green
Exit program mode:
Shortly press program button
*Manuals are also available on our website www.coulisse.com
1.3B
IMPORTANT:
When the mains cable is permanently connected, a readily accessible
disconnect device shall be incorporated external to the motor.
Disclaimer:
Š Copyright Coulisse
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means, electronic, mechanical,
photocopying, recording, digital or otherwise without the written permission of the publisher.
Although this manual has been composed with the most care, Coulisse B.V. does not accept any responsibility for damage due to mistakes and/or faults in this manual.
Coulisse B.V. reserves the right to revise the manual and to revise and/or changes its content at any time, without obligation to notify any person or entity of
such revisions or changes.
The most recent version replaces older versions of this manual. The most recent version is available at ww.coulisse.com or contact your Coulisse contact person.
We invite you to send remarks and comments about this manual to Coulisse at manuals@coulisse.com.
Coulisse B.V., Vonderweg 48, 7468 DC Enter, The Netherlands
ABC-23-U_R0_ GB0
When there is a pluggable connecter installed on the mains cable,
the socket-outlet shall be installed near the motor and shall be
easily accessible.
Assembly Manual
Absolute Control
Curtain Motor ABC-23-W120
CR-02
CR-01
2.1B
1. Calculations
Rail lenght (CR-01-W) = Width - 150mm
Belt length (CR-02) = 2 x Width - 50mm
Number of runners (CR-11-W) = +/- 8pcs/mtr
Ceiling brackets = (CR06-W) = 1pc/mtr
42
22
2.2B
CR-11
260
53
62
1A
2. Assembly
=1x
CR-02
CR-01-W
CR-07/08-W
CR-14-W
CR-04-W
CR-06-W
=2x
CR-03
CR-12
CR-05-W
CR-11-W
CR-09/10
2.2E
2.1C
2.2C
2.2 Assembling Endcaps
CR-09
CR-10
CR-09
CR-09
or
CR-13-W
CR-09
CR-10
CR-04
ABC-23
2A
2.1 Assembling Belt
2.2F
CR-02
CR-12
2.2A
=2x
2.1A
2.2D
2.2G
ABC-23-A_R0_ GB0
=4x
2.4 Installation bracket
ABC-23
2.3 Assemble motor
CR-09
CR-06-W
2.2H
CR-07-W
CR-08-W
CR-14
2.4A
2.3A
2.2I
CR-05-W
ABC-23
2.4B
2.2J
2.3B
ABC-23-A_R0_GB0
2.4C
NOTICE: This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications made to this equipment not expressly approved by Shape
Technology (Shenzhen) Co., Ltd may void the FCC authorization to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
  
   
          
 

    
              
is connected.
    
  !    
 

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Modify Date                     : 2012:08:16 16:01:46+08:00
Create Date                     : 2012:08:15 14:13:42+08:00
Metadata Date                   : 2012:08:16 16:01:46+08:00
Creator Tool                    : Adobe InDesign CS4 (6.0.6)
Format                          : application/pdf
Title                           : 
Creator                         : dell
Document ID                     : uuid:34d1cb6c-4411-417a-9806-da96797750e1
Instance ID                     : uuid:a4987f45-e219-4d79-a09c-27d2f022888c
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Page Count                      : 4
Author                          : dell

EXIF Metadata provided by EXIF.tools