Craftsman 351184240 User Manual BRAD NAILER Manuals And Guides L0706370
CRAFTSMAN Nailer Manual L0706370 CRAFTSMAN Nailer Owner's Manual, CRAFTSMAN Nailer installation guides
User Manual: Craftsman 351184240 351184240 CRAFTSMAN BRAD NAILER - Manuals and Guides View the owners manual for your CRAFTSMAN BRAD NAILER #351184240. Home:Tool Parts:Craftsman Parts:Craftsman BRAD NAILER Manual
Open the PDF directly: View PDF
Page Count: 12
![Operator's ManualCRRFTSMI:IN18 Gauge%- 2" LengthBRAD NAILERModel No.351.1 84240CAUTION: Read and followall Safety Rules and OperatingInstructions before First Useof this Product.Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A..Safety°Operation°Maintenance° Parts List-Espahol449700 Draft (07/25/97)](https://usermanual.wiki/Craftsman/351184240.2577804458-User-Guide-Page-1.png)
![Warranty ............................................ 2Safety Rules ............................................... 2Operation ............................................ 2-4Maintenance ..................................... 4Troubleshooting ...................................... 5Parts Illustration and List ................................. 6-7Espa,%l ........................................... 8-11FULL ONEYEAR WARRANTY ON CRAFTSMANAIR-DRIVE TOOLSIf this Craftsman air-drive tool falls due to a defect in materialor workmanship within one full year from the date of purchase,return it to the nearest Sears Sewice Center in the UnitedStates, and Sears will repair it free of charge.If this air-drive tool is used for commercial purposes, thiswarranty applies for only 90 days from the date of purchaseThis warranty gives you specific legal rights and you may alsohave other rights which vary from state to state.Sears, Roebuck and Co, DepL 817WA, Hoffman Estates, 1L60179,, Air tool operators and all others in work area shoutdalways wear safety goggles complying with United StatesANSI Z87 1 to prevent eye injury from fasteners and flyingdebris when loading, operating or unloading this tool.. Never exceed operating pressure of 100 PSI.° Always keep hands and body away from the fastener dis-charge area when air supply is connected to tool..- Always disconnect tool from air supply when servicing oradjusting toot and when tool is not in use.,, Do not operate when contact trip is not in contact withwork.,, Never load the tool until you are ready to use it..• Never depress tool trigger when leading.° Always load with nose of tool pointing away from you andothers.o Never point tool at yourself or others.° Never carry tool with trigger depressed._, Do not use oxygen, combustible gas or high pressurecompressed gas as the air supply for the tool.o Always use tool at safe distance from other people in workareao Do not attempt to discharge fastener into hard or brittlematerials such as concrete, steel or tile.. Do not connect female quick-disconnect coupling to toolside of air lineo Connect male, free-flow nipple to tool side of air line sothat tool is depressurized when hose is disconnected,,• Do not use a hose swivel with thfs tool,° Use Sears recommended fasteners onlyDESCRIPTIONThe Craftsman 18 Gauge Brad Nailer drives brads from %" t2" long Die cast aluminum body with textured grip minimizesoperator fatigue_ Large capacity, side loading magazine withpositive, quick action latch makes loading easy Safety featur,disables tool unless contact trip is pressed against workpieceTapered nosepiece provides operator with greater visibility foJprecise fastener placement. Rigid nosepiece reduces jamminThe 18 Gauge Brad Nailer is excellent for molding, furnituremaking, and picture framing.SPECIFICATIONSCapacity ..................................... 110 brad nailNail size ....................... 18 gauge (049" x .040"Nail lengths .............................................. %to 2Operating pressure ............................... 60-100 REAir inlet .................................. ¼" N R1Length ............................................ 9Height .......................................... 9%Width ............................................ 2½_Weight .......................................... 2.6 lbsBRAD NAILS18341 ......................... 18 gauge brad nails, %" Ion!18342 ................... 18 gauge brad nails, 1" Ion!18343 .................... t8 gauge brad nails, 1¼" ton_18360 ............................. t 8 gauge brad nails, t½" tone18361 ................... 18 gauge brad nails, t¾" Ion.(18362 .................... 18 gauge brad nails, 2" Ion.(AIR SUPPLY LINERefer to Figure 1 (page 3). The air tool operates on compressed air at pressures frorf60 to t00 PSI.e Never exceed maximum pressureMinimum air requirements for tool; Average working SCFb3.2 at 90 PSI.WARNING: Keep hands and body away from discharge are_of toot when connecting air supply Always disconnect toolfrom air supply when servicing or adjusting tool and when tocis not in use.o Air operated tools require clean, dry, lubricated com-pressed air to ensure top performance, low maintenanceand long life.o Dirt and abrasive materials present in atl air lines will damage tool O-rings, valves and cylinders..o Moisture will reduce tool performance and life if netremoved from compressed air.o A flfter-regulatorqubricator system is required and should belocated as close to tool as possible (see Figure 1, page 3)A distance of less than 15 feet is recommended.. Keep air fitter clean A dirty filter will reduce the air p_essur{to the tool causing a reduction in power and efficiency• The air supply system must be able to provide air pressureof 60 to 100 pounds per square inch at tool.2](https://usermanual.wiki/Craftsman/351184240.2577804458-User-Guide-Page-2.png)