Craftsman 390260293 User Manual PUMP Manuals And Guides L0407610

CRAFTSMAN Pump Manual L0407610 CRAFTSMAN Pump Owner's Manual, CRAFTSMAN Pump installation guides

User Manual: Craftsman 390260293 390260293 CRAFTSMAN PUMP - Manuals and Guides View the owners manual for your CRAFTSMAN PUMP #390260293.

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

SEARS
OWNER'S
MANUAL

MODEL NO.
390.260293

I:RRFTSMRN°
CAUTION:
Read and Follow
All Safety Rulesand
Operating Instructions
Before FirstUse of
This Product.
Save ThisManual For
Future Reference.

PORTABLE 112 H.P.
UTILITY/SPRINKLER

PUMP

• Installation
• Operation
• Maintenance
• Repair Parts

Sears, Roebuck and Co., Hoffman Estates, IL 60179
PRINTED

U.S.A.

Form No

F642-0201

(Rev. 4/20/04)

RULES FOR SAFE INSTALLATION
Carefully
read
manual or on

and follow
pump.

all safety

instructions

AND

OPERATION

WARNING

ill this

Pump is supplied
with
3-conductor
grounding
type cord.
Connect
only to
properly
grounded,
GFCI
protected
outlet.
Do not lilt
pump by electrical
cord.

_This

is the safety alert symbol.
WJlcll yotl scc this
Oll }our punll_ or in this inantlal, look for one
of tile ti)llowing signal words and be alert to the potential
ior personal injut3'!
sylnI_oJ

_=_'_

DANGER warns ahout hazards
serious personal injury, death
if ignored.

erty damage

Hazardous voltage.
Can shock, burn,
or cause death.

I&WARNING1WARNING
warns about
hazards
that can
z cause serious personal injury, death or major
property dalnage if ignored.
_k CAUTION ]CAUTION
can canse
damage if ignored.
The word
important

_Pump
is
non-submersible.
Keep
motor
dry at all times. Do not wash
motor. Do not inlmerse.
Protect motor from wet weather.

that will cause
or major prop-

Ground pump before
connecting to
power supply.

warns about hazards that will or
minor personal injury or property

NOTICE indicates special instructions
but not related to hazards.

which

allow
water

are

_IL

_usingextension
cord,
use only UL approved
indoor/outdoor,
3-wire,
grounding
typecord.
Do not
or receptacle
ends
to sit in

any part of cord
or damp
locations.
Unplug

pump

before

servicing.

1. To avoid risk of serious bodily injury and property damage, read safety instructions
carefully before installing
pump.
2. Follow local and/or national
plumbing
and electrical
codes when installing pump.

_,WARNING ] Hazardous
pressure.
Pump body may explode if used as a booster
pump unless
relief valve capable
of passing
full pump flow at 75 PSi
(517 kPa) is installed.

_WARNING1

_]To

avoid

fatal

shocks,

proceed

as fol-

lows if pump needs servicing:
A Disconnect
power
to pump
outlet
box before
pulling
pump
cord plug. After plug is pulled, let
pump cool for 20 minutes before attempting
to work
on it.

trapped
in pump
during
steam,
leading
to explosion

Ground
Fault Circuit Interrupter
grounded
outlet for cord plug.

Never run pump
dry. To do so can damage internal
parts, overheat pump (which can cause burns to people
handling or servicing pump), and will void warranty!

[_ WARNING ]Risk of fire or explosion.
gasoline or any other flammable liquids
not use pump
in atmosphere
that
flammable fumes or vapors.

Do not pump

chemicals

or corrosive

Do not pump
with pump. Do
might
contain

liquids

witb pump.

*Lake Chemical

FULL
For one year from
workmanship.

ONE

YEAR

WARRANTY

the date of purchase,

Sears will repair

operation,
it may
and burns.

turn

CRAFTSMAN
or replace

LIMITATION

® 112-HP

this pump,

Co., Chicago,

free

Illinois

UTILITY/SPRINKLER
of charge,

if defective

PUMP
in material

LIABILITY

SEARS WILL NOT BE LIABLE FOR LOSS OR DAMAGE TO PROPERTY
OR ANY INCIDENTAL
OR CONSEQUENTIAL
EXPENSE FROM PROPERTY
DAMAGE DUE DIRECTLY
OR IND1RECTL Y FROM THE USE OF THIS PRODUCT

LOSS OR

Some

or exclusion

states

do not allow

may not apply
WARRANTY
UNITED

the exclusion

or limitation

of incidental

or consequential

damages,

so the above

limitation

to you.
SERVICE

IS AVAILABLE

BY SIMPLY

CONTACTING

THE NEAREST

SEARS

SERVICE

CENTER/DEPARTMENT

which

vary from

state to state.

STATES.

This warranty

applies

This warranty

gives you specific

only while

Sears,

this product

is in the United

States.

legal rights,

and you may also have other

fights

Roebuck

and Co.,

Hoffman

Dept.

Pump clean water
only with pump.
To avoid clogging
pump and damage to shaft seal, do not pump water containing solids, foreign
material,
sand, silt, or abrasives.
Always have suction strainer installed when pump is operating. Failure to use strainer
may cause pump failure and
void warrant3'.
Clean strainer and flush out pump after each use.
Make sure all hose and pipe connections
in suction line are
tight. An air leak in suction line will prevent proper priming
and reduce performance
To prevent damage to pump materials, do not use pipe joint
compounds
on pump ports. Use only teflon tape or PlastoJoint-Stik* to seal threads.
Tighten all piping joints to pump hand tight +1-1/2 tums only.
Overtightening
may break pump and will void warranty.
This unit is not designed for applications
involving salt water
or brine! Use with salt water or brine will void warranty.

(GFCI)

pump with
If water
is

NOTICE

B. Take extreme
care when
changing
fuses. To reduce chance of fatal electrical shocks, DO NOT stand
in water or put your finger in the fuse socket.
C. Ground
electrical outlet box.
D.Use only
protected

Explosion
hazard.
Never run
Joutlet
shut
off or blocked.

817WA,

Estates,

IL 60179

IN THE

INSTALLATION
Pumping

From

Lakes, Streams,

and Ponds

Locate pump as near as possible (vertically) to water source,
fn kee l) suction lilt (distance from water to punlp) as low as
possible. Place punq_ on level Sul_port. I'rotecl against excess moisture and Ilooding
lxmg pipe runs ;rod many litting_ increase friction and reduce flow. Use the smallest possible number of fittings and
the shortest
possible nm for piping.
Support

weight

of pipe

[k" sure water is clear of debris
wllieh
can dog ptmlp,
such
as sand, dirt, or scale, l:_esure fl)ot valve and hose are clean
and in good condition;
scale or dirt in f_)ot valve can cause
valve to leak. Valve leakage may cause pump to lose prime,
which can result in pump failure

Boosting

City Water

_l, CAUTION

i Hazardous

lame as a
]lose

OtltJct

nozzle

Pressure
pressure.

disch3rgc

dosed

cxcessi_

c presstlrc.

Whcll

washer,

use only

reinhn'ced

When

using

garden

line, do not rl.lll r*tlnlp with

Ilose
tlsillg

high

IIOZZ]e

ptllllp

its

pressure

I11ay [_tlt'St
it

frolll

high-pressure

hose

or pipe

for

disch:u\tge line. When using garden hose. install adapters to
pump suction and discharge. Suction hose will require two
h'male
ends, Either I.ISC it standard
washhlg
machitle
supply
hose or modify a short piece of standard 3/4" garden hose
as a suction line (see Figures 2A and 2B).
(AHIlleCt

Stlction

hose

tkttlCet

outside

house

(see

Figure 3, Page 4) and to ptnllp sttction Use 3/4" standard
garden hose fi_r discharge. Pump can supply up to 3 sprinklers (depending on GPM output of sprinklers).

Piping
Both snction and discharge ports arc tapped for 1" NPT
(National Pipe Thread) threads. If using hoses, use hose
adapters. When pumping from lakes, streams or ponds, use
reinforced hose supplied with pump. Ordinary garden hose
will collapse and cause pump failure. Keep strainer with l_)ot
valve on end of suction hose. Inspect and clean strainer frequently (Figure 1).
NOTICE: An air leak in suction pipe may draw air in although no water leaks ()tit. Make sure there arc no air leaks
or air pockets in suction pipe.
Figure 2A - When
Discharge Line
(Garden Hose or
Rigid Pipe)

using pump as a booster

pump

with hose-connected
suction and discharge,
install adapters to pump suction and discharge
ports.

Hose adapter or
plastic pipe adapter
Priming Plug

115 volt, GFClprote_ed,
grounded outlet box.

2374 0396
Suction Line
supplied)
2376 0396

Foot valve with strainer
(Supplied - clean frequently)

Figure

I - Typical Installation

Figure 2B - Connect pump to spigot for use
with sprinklers. Connect with adapters supplied
with pump.

OPERATION
LUBRICATION

PRIMING/OPERATION
NOTICE:
water

1)o not

leaking

or flooding,

All SLIction
lift

is not

priming
pump
suction

run

can danlage

alld

Coilnc'ctioil_,
nil)re

port
water
hose

thall
hclk)re

pump

iml)ellcr
will
nltlst

dry,.
and

Running

void

without

Motor

€'arising

is water

is lubricated
cl)oh:d

Start

body

pump;

(depending
above

PUMP

Make Stll-C suctiotl

Fill ptlnlp

primp.

ill under
lO minutes
and height
of pump

st'ill

;it f;Ictor 3' for life iff hearings.
;trail self

Ptlnlp

Sc:ll

lul3ricating

warrallty.

he airtight.

20 f(.'ct (6. IM).
slartillg

punlp

may dillllage

throtlgh

_Hazardous

wfltage.
Can shock,
burn,
orcause death. Disconnect
motor from electrical power
before
servicing
pump.
Motor has atito-rcset
thermal nverload.
If motor overheats,
overload will cut off powcr to prevent damage and will reset
after nlotor cools. If overload trips repeatedly,
check pump
l_)r cause (low w)ltage, clogged impeller, etc.).

it shotlld

length

water).

Figure 3 - Typical sprinkler application.
can supply up to three sprinklers.

SERVICE

Pump

CAUTION_ Hazardous
pressure.
Do not shut off hose
or sprinklers
while pump is running
Hose or
sprinkler head may cxplode.

Figure 4 - Sprinkler pumping from pond. Pump
can supply one to three sprinklers depending on
conditions.
4

ELECTRICAL
_kWARNING

Risk
shock.

Hazardous
voltage
standing

Dn
on
wet

of dangerous
Unplug
pump

tint handle
pump
or attempt
pump
with
wet
hands
or

Performance

damp

to work
while

floor.

Chart
Discharge

Suction

l)lug immp into 1 IS Volt, 60 Cycle outlet only. Pump is
equipped
with 3-wire, grounded,
cord and plug. 1)o not
modify or remove
plug. Plug in to properly
grounded.
grounding
type outlet only. Make sure pump circuit meets
National
Electrical
Code (in tSA) or (_anadian
Electrical
Code (in (_anada). To ;|void dangerous
elcctrk:a[ shock hazard, kee l) cord dry :it all times.

or
fatal
electric
before
servicing
it.

Lift

Pressure

in Pounds

20
Flow

per Square

in Gallons

Inch

Per Minute

10.2

10.0

9.7

9.2

8.4

6.9

4.2

9.9

9.6

9.4

9.1

7.5

6.1

4.9

3.8

10'

7.9

7.6

7,4

7.2

6.3

5.3

4.0

3.0

15'

6.5

6.4

6.3

6.2

6.0

4.5

3.4

2.5

20'

4.8

4.7

4,7

4.2

2.2

per
Gal.
Min.

NOTE: Performance cloes not take into account pressure losses in suction and discharge piping,

?
/

2377 0396

Figure 6 - Shroud replacement.

Unplug

pump

before doing any work on it. Be sure that green
ground wire is solidly connected to grounding
terminal
(marked @) before reinstalling
shroud. See Steps I and 10, Page 6, for shroud
fastenings.
2378 0396

Figure 5 - Capacitor replacement.
Unplug pump
before doing any work on it. Discharge capacitor
by shorting capacitor lead wires together before
removing
it.
5

PUMP

DISASSEMBLY

Make

stu'c

I)o

I101

l_ick,
_;cr_ltC]l

that

\oti

_n" _zrack
or

gokl_C

do
ii_'\\

SEAL REPLACEMENT

Step I

[_kWARNING1 Risk of electric
J shock.
Unplug
pump
before
working
on it.
,_cr_ttch,

AND

Step 2

not
seal.
pLllllp

_baft. Make sure scal I_lccs are
clean when installing ilew seal.

2379 0496

Step

Step 3

Step

Pull

2382 0496

2383 0496

Step 6

Step

2385 (3496
2386 0496
23840496

Step

Step 9

[_ WARNING]Risk of electrical
Jshock.
Connect

ground
pump

wire before
in shroud.

inserting

Impeller
must not bind
on
diffuser
(inside
pump
body)
at reassembly
(Step
9). Turn
shaft by hand before tightening
pump body bolts to make sure
that shaft and impeller are clear
of diffuser.
2387 0496

2388 049t

REPAIR PARTS

18
17
16

19
9
7
6

4
5

To order parts, call:
Sears Product Service,
1-800-366-7278

Key
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
•

Part Number
101P3410
111P0710
102P1030
111P0370
101P3460
111P0480
102P2840
731S5700
ZBR00010
111P0700
101P1290
121P0090
121P0920
121P1280
102P2010
121R2240
721S1030
751S3230
121P1500
121P4t80
171P5740
121P1940
ZB400960
ZA000020

• Not illustrated.

Part Description
Pump Body
Drain/Priming Port O-Ring
Drain/Fill Cap
Hose Adapter O-Ring
Garden Hose Adapter
Venturi O-Ring
Venturi/Diffuser
Impeller
Shaft Seal - Complete
Pump Body O-Ring
Seal Plate
Motor
Flat Washer
Lock Washer
Ground Screw
Fan (Includes Key No. 17)
Fan Clip
Fan Cover
Motor Housing (Complete)
Washer for Housing Screw
Housing Screw
Capacitor - 30 microfarad
Cap Screw
Suction Hose Kit with
1" Foot Valve and Strainer
Foot Valve and Strainer - 1"

* If motor fails, replace entire pump.

Qty.
1
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6

[RRFTSMRW
OWNER'S
MANUAL

PORTABLE 112 H.P.
UTILITY/SPRINKLER
PUMP

Model No.
390.260293

Forthe repair or replacementpartsyou need
Call 7 am - 7 pro, 7 days a week

1-800-366-PART
(1-800-366-7278)

For in-homemajorbrandrepair service
Call 24 hours a day,7 daysa week

1-800-4-REPAIR
(1-800-473-7247)

The model number of
your Horizontal Tank will
be found on a plate
attached to the tank.
When requesting service
or ordering parts, always
give the following
information:
• Product Type
• Model Number
• Part Number

Forthe locationof a
SearsRepair ServiceCenterin yourarea
Call 24 hours a day,7 daysa week

1-800-488-1222

For informationon purchasinga Sears
MaintenanceAgreementor to inquire
aboutan existingAgreement
call 9 am - 5 pm, Monday-Saturday

1-800-827-6655

SEARS

• Part Description
Amerrca's Repair

Sears, Roebuck and Co., Hoffman

Speciahsts

Estates, IL 60179

U.S.A.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 8
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Wed Apr 04 14:41:08 2007
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Craftsman 390260293 User Manual PUMP Manuals And Guides L0407610

CRAFTSMAN Pump Manual L0407610 CRAFTSMAN Pump Owner's Manual, CRAFTSMAN Pump installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation