Craftsman 917255692 User Manual Lawn, Tractor Manuals And Guides L0805065

CRAFTSMAN Lawn, Tractor Manual L0805065 CRAFTSMAN Lawn, Tractor Owner's Manual, CRAFTSMAN Lawn, Tractor installation guides

User Manual: Craftsman 917255692 917255692 CRAFTSMAN Lawn, Tractor - Manuals and Guides View the owners manual for your CRAFTSMAN Lawn, Tractor #917255692. Home:Lawn & Garden Parts:Craftsman Parts:Craftsman Lawn, Tractor Manual

Open the PDF directly: View PDF PDF.
Page Count: 52

DownloadCraftsman 917255692 User Manual  Lawn, Tractor - Manuals And Guides L0805065
Open PDF In BrowserView PDF
_Convertible

®

Caution:
Read and follow
al_ Safety Rules
and Instructions
Before Operating
This Equ=pment

oAssembly
oOperatien
oCustemer Respensibinities
o ServRceand Adjustment
o Repair Parts

Sears, Roebuck and Co., Chicago, _L 60684 U.S.A.
......

ll,li,Nil,ll

SAFETY
Practices RULES
for Ride-On

Safe Operation

Mowers

IMPORTANT: THIS CUTTING MACHINE tS CAPABLE OF AMPUTATING HANDS AND FEET AN D THROWING OBJECTS,
FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
to

GENERAL

•

Read, understand, and follow all instructions in the manual
and on the machine befol'e starting
Onty allow responsible adults, who are familiar with the
instructions, to operate the machine.
Clear the area of objects such as rocks, toys, wire, etc.,
which could be picked up and thrown by the bladeo
Be sure the area is clear ofother people before mowing. Stop
machine if anyone enters the area_

•
,
•
•
•
•

•
•

•
•
•
•
•
•
It.

OPERATION

iii. CHILDREN
Tragic accidents can occur if the operator is not alert to the
presence of children. Children ate often attracted to the machine
and the mowing activity_ Never assume that children will remain
where you last saw them.
*
"
.

Before and when backing, look behind and down for small
children

.

Never carrY children. They may fall off and be seriously
injured or interfere with safe machine operation.

.
.

Never allow children to operate the machine,
Use extra care when approaching blind corners, shrubs,
trees, or other objects that may obscure vision

IV.

SERVICE

Never carry passengers.
Do not mow in rover se unless absolutely necessary. Always
look down and behind before and while backing..
Be aware of the mower discharge direction and do not point
it at anyone. Do not operate the mower without either the
entire grass catcher or the gua_'d in place_
Slow down before turning,
Never leave a running machine unattended. Always turn off
blades, set parking brake, stop engine, and remove keys
before dismounting.
Turn off blades when not mowing.
Stop engine before removing grass catcher or unclogging
chute.

Use extra care in handling gasoline and other fuels, They are
flammable and vapors are explosive..
Use only an approved container
Never remove gas cap or add fuel with the engine
running Allow engine to cool before refueling. Do not
smoke.

Mow only in daylight or good artificial light.
Do not operate the machine while under the influence of
alcohol or drugs.
Watch for traffic when operating near or crossing roadways.
Use extra care when loading or unloading the machine into
a trailer or truck.
SLOPE

Never refuel the machine indoors.
Never store the machine or fuel container inside where
there is an open flame, such as a water heater_
Never run a machine inside a closed area_
Keep nuts and boits, especially blade attachment bolts, tight
and keep equipment in good condition,

OPERATION

Never tamper with safety devices.
operation regularly_

Slopes are a major factor related to loss-of,-control and tipover
accidents, which can result in severe injury or death° All slopes
require extra caution. If you cannot back up the slope or if you feel
uneasy on it, do not mow it.

Mow up and down slopes, not across.
Remove obstacles such as rocks, tree limbs, etc.

•

Watch for holes, ruts, or bumps.
Uneven terrain could
overturn the machine_ Tall grass can hide obstacles.
Use slow speed. Choose a low gear so that you will not have
to'stop or' shift while or] the slope.
Follow the nlanufacturer's
recommendations
for wheel
weights or counterweights to improve stability.
Use extra care with grass catchers or other attachments,
These can change the stability of the rnachine.

•
•
•
•
•

Stop and inspect the equipment if you stri!,

.i

J

C

%

5
26

I_

12

A

B

C

p*=

D

E

13
KEY PART
NO. NO.
1
2
3
4
5
6
7
9
10
11
12
13
14
15

127438X
126656X
STD523707
1913121O
2751R
STD541437
124181X
19131614
131451
121251X
121246X
121248X
72050411
1343O0

DESCRIPTION
Seat
Bracket, Pivot, Seat
Bolt
Washer 13/32 x 3/4 x 10 Gauge
_luitP,Fuel Line
ring, Seat
sher 13/32 x 1 x 14 Gauge
Pan, Seat
Strip, Foam
Bracket, Switch Mounting
Bushing, Snap, Nylon
Bolt, Carriage 1/4-20 x 1-3/8
Spacer, Split

KEY PART
NO. NO.

DESCRIPTION

16
17
18
19
20
21
22
24
25
26
27
29

Spring
Nut, Flangelock 1/4 Grade 5
Screw
Nut, Keps #10-32UNF
Clip, Insulated
Bolt, Shoulder 5/16-18 UNC
Nut
Washer 17/32 x 1-3/16x 12 Gauge
Bolt, Shoulder 5/16-18 x .62
Knob, Seat
Nut
Cap, Spring, Seat

121250X
123976X
STD511005
73951000
4171R
105529X
STD541431
19171912
127018X
120068X
STD541437
124238X

NOTE: All component dimensions given in U,S. inches
1 inch = 25.4 mm

38

REPAIR PARTS
14 HP 42" TRACTOR

- - MODEL NUMBER

917.255692

DECALS

25
24
13

18

6 2

3

7 8

5

8 20 4

22

3

10

9

22

15

19

11
16
12
23
1

4

--..

23

KEY PART
NO. NOo
1
2
3
4
5
6
7
8

108456X
133178
128490
128491
105806X
133644
106814X
133204

9
10
11
12

128314
133796
4900J
109199X

DESCRIPTION
Decal, Operating Instruction
Decal, Mower, 3 In One
Decal, Hood, Craftsman, RH
Decal, Hood, Craftsman, LH
Decal, Grille, Craftsman
Decal, Maintenance
Deca_, Side Panel, Stripe, RH
Decal, Side Panel,
Kohler OHV/14 HP
Decal, Fender, Craftsman
Decal, Caution
Decal, Clutch/Brake
Decal, V-Belt Drive Schematic

KEY PART
NO. NO.

DESCRIPTION

13
14
15
16
17
18
19
20
2i
22
23
24
25
--

Decal, Chassis, 6 Speed/42"
Decal, V-Belt Schematic
Decal, Danger
Decal, Rotating Blades
Decal, Mower QC System
Decal, Insruction
Decal, Battery
Decal, Side Panel, Stripe, LH
Decal, LT4000
Decal, Hood & Grill, LT4000
Reflector, Taillight
Decal, Hood, Stripe, LH
Decal, Hood, Stripe, RH
Manual, Owner's

'131473
136832
121343X
3713J
133179
132268
120960X
106813X
132271
128258
106202X
108743X
108744X
136219

KEY PART
NO. NO,

7

1
2
3
4
5
6
11
7
8
9
10
!I

59192
65139
106222X
59904
106732X311
278H
9040H
106108X31!
124632X
7152J
104757X

DESCRIPTION
Cap, Valve, Tire
Stem, Valve
Tire, Front
Tube, Front (Service Item Only)
Rim Assembly, Front
Fitting, Grease (Front Wheel Only)
Bearing, Flange (Front Wheel Only)
Rim Assembly, Rear
Tire, Rear
Tube, Rear (Service Item Only)
Cap, Axle

NOTE: All component dimensions given in UoS, inches
1 inch = 25A mm

39

REPAIR PARTS
14 HP 42" TRACTOR

- - MODEL NUMBER 917.255692

42" MOWER DECK

H
8

90
67

70

82

89
91

87

7"/
42

66

/84
76
43
59

!
39
52

51

21
54

92
14
18

15
17
12

5.-_
-----6

95

4O

98 97

REPAnR PARTS
14 HP 42" TRACTOR
42" MOWER

KEY PART
NO. NO.
1
2
3
4
5

130970
130969
110485X
128774
133172

6
7
8
9
10
11
12
!3
14
15
!6
17
18
19
20
21
22
23
24
25
26
27
28
29
33
34
35
36
37
38
39
40
41
42
43

129895
134149
129962
STD551137
850857
128961
130968
131491
131267
110452X
123713X
19111016
105304X
STD541431
STD533107
STD624008
127218
73350800
130171
STD541450
135388
135563
130832
134619
133844
78158
129963
129861
73050900
STD5337t7
133943
131494
122052X
19131612
133502

44

133503

45
46
47
48
49
50
5!
52
53

STD541437
72110618
133835
131340
133940
STD541410
105529X
131845
133944

- o MODEL NUMBER

917.255692

DECK

KEY PART
NO. NO.

DESCRIPTION
Mower Deck Assembly, 42"
V-Belt, 42" Mower
Bearing, Ball, Mandrel
Housing, Mandrel, Vented
Shaft Assembly, Mandrel, Vented
(Includes Key Number 6)
Bearing, Ball
Blade, Mulching, 42" Mower Deck
Washer, Hardened
Washer, Lock
Bolt 3/8-24 x 1 25 Grade 8
Stripper, Vented Mower Deck
Shield, Deflector
Rod, Hinge
Bracket, Deflector
Nut, Push
Spring, Torsion, Deflector
Washer 11/32 x 5/8 x 16 Gauge
Cap, Sleeve
Nut
Bolt
Retainer Spring
Link, Front
Nut, Hex, Jam 1/2_13 UNC
Trunnion
Nut
Link, Lift, RH
Pin, Spring, Slotted
Arm, Suspension, Rear
Link, Lift LH
Arm, Idler
Bolt 5/16-18 x 1.25
Washer, Spacer
Pulley, Mandrel
Nut, Toplock 9/16
Bolt
Washer, Hardened
Pulley, Idler, Flat
Spacer, Retainer
Washer 13/32 x 1 x 12 Gauge
Spacer, Idter Arm, Upper,
Hardened
Spacer, Idler Arm, Upper,
Hardened
Nut
Bolt, Carriage 3/8-16 x 2-1/4
Fastner, Christmas Tree
Bolt, Shloulder #10.24 Grade 5
Roller AssembIy, Cam Follower
Locknut
Bolt, Shoulder 5/16-18 UNC
Arm Assembly, Pad, Brake
Washer, Hardened

54
55
56
57
58
59
60
61
62
63

131335
133551
STD560907
133504
134236
134666
STD541237
133205
STD624003
17720410

64
65
66
67
68
69
70
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91

127498
133435
127847
128903
12000029
121748X
127845
127846
128759
12000022
19292016
131926
121002X
74780624
121006X
2876H
122364X
122365X
t25631X
1108IOX
19151216
12000037
110807X
STD551037
STD560907
110729X
100734K

92
93
94
95
96
97
98
--

134753
134079
7t161010
STD551110
190612t6
2029J
130758
133171

--

130794

DESCRIPTION
Spring, Extension
Rod, Pivot, with Nibs
Cotter Pin
Rod, Clutch, Secondary, with Nibs
Guard, Mandrel, LH
Rod, Clutch, Primary, with Nibs
Nut
Trunnion 3/8-16 UNC x t 30
Retainer
Screw, Hex Head, Thread Cutting
1t4-20 x 5/8
Bushing, Large, Brass
Spring, Extension, Return
Arm, Clutch, Secondary
Bolt, Shoulder 3/8-16 UNC x 1.44
Ring, Klip
Washer 25/32 x 1_5/8 x 16 Gauge
Keeper, Spring
Arm, Clutch, Primary
Spring, Mower Clutch
E-Ring
Washer 29/32 x 1-1/4 x 16 Gauge
Shaft Assembly, Lift
Lever Assembly, Lift
Bolt, Hex, Fin. 3/8-16 UNC x 1-1/2
Rod Assembly, Lever
Spring
Plunger, Lift Lever
Button, Plunger
Grip, Handle, Fluted
Trunnion, Depth Stop
Washer 15/32 x 3/4 x 16 Gauge
Ring, Klip
Nut, Special
Washer
Pin
Rod, Lift Adjust
Knob, Infinite Height Adjustment
3/8-16 UNC
Stiffener Bracket
Mulcher Cover
Screw
Washer, Lock
Washer #10
Nut, Weld
Latch Assembly, Bagger
Mower Deck, Complete (Does Not
include Mulching Components)
Mandrel Assembly (Includes Key
Numbers 5-8, 10-12, 39 and 41)

NOTE; All component dimensions given in U.So inches
1 inch = 254 mm

41

REPAIR PARTS
14 HP 42" TRACTOR - - MODEL NUMBER
DANA TRANSAXLE - MODEL NUMBER 4360-41

917.255692

28

31

26

32

27

33
34
36

55

19

38
39
37

3

19

52

40

4

41

42
54

55

t2
47

56

48

57

49

59
56

55

6O
62

59
63
64
52

65
68

8

6"6
42

70

69

REPARRPARTS
14 HP 42" TRACTOR - - MODEL NUMBER
DANA TRANSAXLE - MODEL NUMBER 4360-41

KEY PART
NO. NO.
1
2

124643X
2274J

3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38

134400
105904X
105905X
134788
t34399
120951X
134791
2267J
134793
10615tX
120415X
2257J
106846X
106095X
105909X
1059t0X
105911X
108976X
105913X
120468
2242J
124638X
2244J
105916X
120470X
110070X
108977X
109254X
124644X
108980X
120406X
134796
105925X
2232J
108978X
110079X

39
40
41

124639X
!20472X
105928X

KEY PART
NO, NO.

DESCRIPTION
Housin_ Upper
Screw, !apping, Large
1/4-20 x .734
Ball, Detent
Spring, Detent
Screw, Set
Kit, Shifter Assembly
Boot, Shifter
Puck, Friction
Screw, Tapping, w/Sealer
Ring, Retaining
Assembly, Kit, Shim, °625 Shaft
Gear, Spur, 15 Teeth
Washer, Plain .632 x t .38 x °046
Key, Woodruff, #9
Assembly, Kit, input Shaft
Pinion, Bevel, t4 Teeth
Ring, Retaining
Chain, 24 Pitches
Bearing, Flange
Gear, Spur, 14 Teeth
Collar, Clutch
Key, Clutch
Key, Woodruff, #3
Shaft, Intermediate
Key, Woodruff, #61
Ring, Retaining
Sprocket, 18 Teeth
Spacer
Gear, Spur, 37 Teeth
Gear, Spur, 35 Teeth
Gear, Spur, 30 Teeth
Gear, Spur, 25 Teeth
Gear, Spur, 22 Teeth
Gear, Spur, 19 Teeth
Washer, Plain n640 x 1o37 x .06'I
Washer, Plain .632 x 1o00 x .026
Spacer .630 x 1_O0x .169
Assembly, Gear, Combination, 12
Teeth and 35 Teeth
Shaft, Idler
Spacer .633 x .87 x.755
Sprocket, 9 Teeth

42
43
44
45

106605X
134394
120473X
106596X

46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72

105933X
124641X
106589X
120408)(
105937X
2226J
134401
2264J
120474X
I20409X
105941X
!10071X
120952X
106592X
120475X
134798
120961X
7294J
108989X
120953X
120954X
134799
108992X
108996X
120956X
73810500
120416X

*
**
***

917.255692

DESCRIPTION
Gear, Bevel, 42 Teeth
Assembly, Kit, Shim, °750 Shaft
Shaft, Drive
Screw, Tapping, Large
5/16-18 x 1 °44
Gear, Spur, 12 Teeth
Gear, Spur, 20 'Teeth
Gear, Spur, 25 Teeth
Gear, Spur, 28 Teeth
Gear, Spur, 31 Teeth
Washer, Plain °632 x 1o00 x .060
Washer, Neoprene
Washer, Plain .758 x 1.25 x .03'1
Axle, Left Hand
Gear, Miter, 15 Teeth
Ring, Retaining
Gear, Spur, 32 Teeth
Shaft, Cross
Gear, Miter, 15 Teeth
Axle, Right Hand
Housing, Lower
Puck, Friction
Disc, Brake
Spacer
Jaw, Brake
Pin, Dowel
Screw, Tapping 5/16-18 x 2.25
Lever, Actuating
Washer, Plain _321 x t _00x .055
Bracket, Anti-Rotation
Locknut 5/16-24
Grease

Use in various combinations to maintain proper
clearances.
Order Key Number 15.
Lubricate with Aerospace Lubricant. Inc_
PC-8 Oil or equivalent,

NOTE: All component dimensions
1 inch = 25.4 mm

43

given in U,S,, inches

REPAIR PARTS
14 HP 42" TRACTOR
KOHLER

ENGINE

AIR INTAKE

- MODEL

NUMBER

CV14S, TYPE NUMBER

BLOWER

i _--1

- - MODEL NUMBER

HOUSING

917,255692

1445

AND BAFFLES

I

2

6_

1

9

i

10
:cRANKSHAFT.J

/
_'_

15
11

EX.AUST.,I
.............
4
5

44

3

RIEPAmRPARTS
14 HP 42" TRACTOR
KOHLER

ENGINE

- MODEL

NUMBER

- - MODEL NUMBER

CV14S, TYPE NUMBER

AIR INTAKE

12 341
12 096
12 '100
X-25-63
12 083
12 083
12 072
12 086
12 041
12 094

1445

BLOWER HOUSING AND BAFFLES

KEY PART
NO. NO.
1
2
3
4
5
6
7
8
9
10

917.255692

KEY PART
NO. NO.

DESCRIPTION
01
06
01
08
05
03
01
02
01

Knob, Air Cleaner Cover
Cover, Air Cleaner
WingNut
Washer, Plain 1/4
Precleaner Element
Element, Air Cleaner
Stud, Mounting Plate
Screw, Mounting Plate Stud
Gasket, Air Cleaner
Base, Air Cleaner

1
2
3
4
5
6
7
8

SM-0545010
12 146 01
12 063 01
12 096 0'1
12 027 04
!2 063 02
12 313 03
12 063 03

DESCRIPTION
Screw, Mounting M5 x 0,8 x 10 ('14)
Plate, Blower Housing
Baffle, Cylinder Barrel
Cover, Starter
Housing, Blower
Baffle, Carburetor
Grommet, Blower Housing
Baffle, Cylinder Head

ENGINE CONTROLS

EXHAUST
KEY PART
NO, NO.
1

M-0829036

2
3
4
5
6

12 041 03
SM-0841080
12 t26 1t
12445 01
SM-0645025

KEY PART
NO, NO.
DESCRIPTION
Stud, Exhaust Manifold
M8 x 1°25 x 20 (2)
Gasket, Exhaust Manifold
Nut, Muffler Mounting M8 x 1.25 (2)
Bracket, Muffler
Strap, Lifting
Screw, Lifting Strap
M6 x 1o0 x 25 (3)

CRANKSHAFT
KEY PART
NO. NO.
1
---

DESCRIPTION

12 014 02

Crankshaft

'!252202
12 755 0t

Short Block
Gasket Set

1
2
3
4
5

12 079 03
12 237 0'I
SM-0645020
SM-0545016
12 536 01

6
7
8
9
10
tl

SM-0443025
12 089 1'1
12 O89 04
12 089 12
SM-0641060
SM-0642025

12
t3
14
15

12 090 05
25158 09
12 O79 01
25t58 08

DESCRIPTION
Linkage, Choke
Clamp, Cable
Screw, Hex Head M6 x 1.0 x 20 (2)
Screw, Cable Clamp
Control, Speed Assembly.(lncludes
Key Numbers 6 through 8)
Screw
Spring
Spring, Choke Return
Spring, Governor
Nut, Governor Arm M6 x 1,.0
Screw, Governor Arm
M6 x 1.0 x 25
Lever, Governor
Bushing
Linkage, Throttle
Bushing

NOTE: All component dimensions
1 inch = 25.4 mm

45

given in U.S. inches

REPABRPARTS
14 HP 42" TRACTOR - - MODEL NUMBER 917.255692
KOHLER

FUEL

ENGINE

SYSTEM

- MODEL

NUMBER

CV14S, TYPE NUMBER

1445

_i...................................

36

34

3

3O

35
5
40
.135
41

31

33

/

4

12

/

7
J26
8

10

HUHIUHI/
UHII ill

CYLINDEP

HEAD,

VAVLE

AND

9

HI

BRE,ATH..ER

' .I

14

9

21 .._
20-._.__
19 ----_

46

REPAIR PARTS
14 HP 42" TRACTOR - = MODEL NUMBER 917.255692
KOHLER ENGINE - MODEL NUMBER CV14S, TYPE NUMBER 1445

FUEL SYSTEM
KEY PART
NO. NO.
1

12 853 08

2 X-22-11
3 25 237 02
4 12 265 01
5 X-426-9
6 12 04'I 01
7 12 041 O2
8 M-0629122
9 X-25-63
10 SM-0641060
11 52 353 22
12 47 154 01
13 25 O50 02
14 12 368 01
15 12 O89 09
16 12 086 04
'17 t2 O89 O9
18 12 146 03
19 25 086 27
20 12 144 09
21 '12 144 O8
22 1208910
23 12 146 02
24
12 337 01

DESCRIPTION

KEY PART
NO, NO.

Kit, Carburetor w/Gaskets
(Includes Key Numbers 6, 7: and
14-29, and all Kits marked-)
Washer, Star 1/4
Clamp, Hose (2)
Deflector, Heat
Clamp, Hose (4)
Gasket, Carburetor (2)
Gasket, Air Cleaner
Stud, Carburetor M6 x 1.0 x 110 (2)
Washer, Plain 1/4
Nut, Carburetor M6x !o0 (2)
Fuel Line
Clip, Cable
Filter, Fuel
Needle, Idle
Spring, Idle Speed
Screw, Idle Speed Adjust
Spring, Idle Fuel
Plate, Throttle
Screw, Throttle Plate (2)
Shaft, Throttle with Lever and Seal
Shaft, Choke
Spring, Choke Return
Plate, Choke
Jet, Main

25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41

12 757 02
12 041 05
t2 104 01
t2 041 06
12 086 05
12 559 01
25 041 09
SM-0645020
25 155 02
12 123 01
12 353 01
12 3t3 01
SM-0545010
t2 154 01
12 086 07
12 431 01
X-380ol

DESCRIPTION
Kit, Float
Gasket, Bowl
Bowl, Fuel
Gasket, Bowl Retainer Screw
Screw, Fuel Bowl
Kit, Fuel Pump (Includes Key #31)
Gasket, Fuel Pump
Screw, Fuel Pump M6 x 1,0 x 20 (2)
Connector, Hose
Line, Fuel, Metal
Rubber
Line, Fuel, Fuel Line(2)
Grommet,
Screw, Fuel Line Clamp
Clamp, Fuel Line
Screw, Ground Wire
Sleeve, Insulating
Connector, Hose

NOT ILLUSTRATED
12 757 01
* Kit, Carburetor Repair
12 755 09
* Kit, High Altitude Jet
12 435 02
* Solenoid Assembly, Fuel
12 5't8 05
Lead, Solenoid, Black, 5'1,14
Gauge Uninsulated Push-On Tabs
41 518 34
Lead, Ground, Green, 5,18 Gauge
Insulated Grip Barrel Eyetets

CYLINDER HEAD, VALVE AND BREATHER
KEY PART
NO. NO.
1
2
3
4
5

7
8

12 318 01
12 351 01
12 411 Ol
12 041 04
12 017 01
12 017 02
12 016 01
12 016 02
12 112 04
M-1040080

9
10
11
t2
13
14
15

52 018 01
12 089 '15
t2 173 01
t2 755 03
12 089 01
12 032 02
X-426-9

6

KEY PART
NO. NO,

DESCRIPTION
Head, Cylinder
Lifter, Valve (2)
Rod, Push (2)
Gasket, Cylinder Head
Valve, Intake, Standard Size
Valve, Intake .25" oversize
Valve, Exhaust, Standard
Valve, Exhaust 25" oversize
Spacer, Head Bolt Exhaust Port
Screw, Cylinder Head

alo x t.5 x ao(5)
Retainer, Spring (2)
Spring, Exhaust Valve, Green
Cap, Valve Spring (2)
Kit, Retainer (2)
Spring, Intake Valve
Seal,Valve Stem
Clamp, Hose (2)

16
17

12 326 03
SM-0645020

18
19

12 O96 O7
SM-0545010

20
21
22

12 018 01
12 402 01
SM-0642025

23
24
25

12 186 01
12126 05
12 14403

DESCRIPTION
Hose, Breather
Screw, Valve Cover
M6 x 1.0 x 20 (3)
Cover, Valve with Nipple
Screw, Breather ReedRetainer
M5x Oo8x 1
Retainer, Breather Reed
Reed, Breather
Screw, Rocker Bridge
M6 x 1,0 x 25 (2)
Arm, Rocker (2)
Bridge, Rocker Arm
Shaft, Rocker Arm

NOT ILLUSTRATED
12 755 02
Kit, Cylinder Head
NOTE: All component dimensions given in U,So inches
1 inch = 2&4 mm

47

REPAUR PARTS
14 HP 42" TRACTOR
KOHLER

ENGINE

GNITION

- MODEL

NUMBER

- - MODEL NUMBER

CV14S, TYPE NUMBER

917.255692

1445

OIL PAN / LUBRICATION

1 ELECTRICAL

I

18
_--20
_22 21

START!NG SYSTEM I

5

4

®
13

_7

48

_4

REPABR PARTS
14 HP 42" TRACTOR
KOHLER

ENGINE

- MODEL

NUMBER

-- MODEL NUMBER

CV14S, TYPE NUMBER

IGNITION / ELECTRICAL

CRANKCASE

KEY
NO.
1
2
3
4
5
6
7
8
9

PART
NO.
SM-1040045
12 468 03
12 162 01
SM-0639016
12 112 0'1
12 157 0!
X-42-15
41 403 09
SM-0639016

KEY PART
NO. NO.

10
11
12
13

236602
236473
12 025 01
SM-0544025

14

SM-05450!0

15
16
17
18
19
20
21

'12 154 02
41 085 07
12 132 02
X-728-t
8M*0545010
12 58401
SM-0545020

DESCRIPTION
Screw, Flywheel Mounting
Washer, Flywheel Mounting Screw
Screen, Grass
Screw, Fan Mounting (4)
Spacer, Fan (4)
Fan
Key
Rectifier-Regulator
Screw, Rectifier-Regulator
M6 x 1.0 x 1_6(2)
connector, Rectifier-Regulator
Connector, 3 Contact
Flywheel Assembly
Screw, Stator Mounting
M5 x 0.8 x 25 (4)
Screw, Stator Harness Clip
M5xO.Sx 10
Clip, Stator Harness
Stator, 15 Amp
Spark Plug
Clip, Kill Lead
Screw, Lead Clip
Module, Ignition
Screw, Ignition Module
M5 x o,8 x 20 (2)

1
2

3
4
5
6
7
8

9
10
'11
i2

NOT ILLUSTRATED
25 518 05
Lead, Black, Rectifier To Connector
5"-14 Gauge, Uninsulated Push-on
Tab Terminals
12 518 01
Lead, White, Ground To Kill

13
14
15
16
17
18
19
20
21
22
23

OIL PAN / LUBRICATION
KEY
NO.
1
2
3
4
5
6
7
8
9

PART
NO.
12 03B 01
12 153 02
12 123 04
SM_0545020
12 t5301
12 162 02
12 096 03
SM-0545016
SM-1039025

10
11
!2
!3
14
t5
16
17
18
19
20
21
22

12 126 02
12 089 03
1246201
12 208 01
52 O50 02
12 136 01
X-75-23
12 199 09
X-75-10
12 393 0!
12 032 04
1209602
SM-0£_5016

23
24

12 032 03
SM-0839045

DESCRIPTION
Dipstick
O-Ring, Upper Oil Fill Tube
Tube, Oil Fill
Screw, Oil Fill Tube M5 x 0.8 x 20
O-Ring, Lower Oil Fill Tube
Screen, Oil Pick-up
Cover, Oil Pick-up Screen
Screw, Screen Cover
Screw, Oil Pump Relief Valve
Bracket MIO x 1o5 x 25
Bracket, Oil Pump Relief Bracket
Spring, Oil Pump Relief Valve
Piston, Oil Pump Relief Valve
Body, Oil Pump Relief Valve
Filter, Oil
Adapter
Plug
Pan, Oil
Plug, Soil d Sq. Hd. 3/8 NPTF (2)
Pump, Oil
O-Ring, 0i! Pump Cover
Cover, Oil Pump
Screw, Oil Pump Cover
M5x O.Sx 16 (,_
3)
Seal, Oil (P.T.O. End)
Screw, Oil Pan M8 x 1.25 x 45 (12)

917.255692

1445

12 032 03
12 030 01
12 030 02
12 030 03
12 445 02
SM-0839025
12 380 03
12 010 02
12 089 05
12 422 01
12422 02
'!2 422 03
12422 11
12 422 12
12 422 06
t2 422 07
12 144 04
12 874 01
12 874 02
'12 874 03
12 018 02
12 t08 01
12 't 08 02
12 'IOB 03
12 067 01
12 O67 02
12 360 01
1204305
SM-0631005
t2 144 02
52 139 09
12 144 01
SM-0631015
12 032 01
)(-25-1 O2
12 380 04

DESCRIPTION
Block, Cylinder (Use
Part Number 12 522
Seal, Crankshaft
Bearing, Crankshaft,
(Flywheel End)
Bearing, Crankshaft
Bearing, Crankshaft
Strap, Lifting
Screw, Lifting Strap
Dowel, Locating (4)
Camshaft Assembly
Spring, Actuating
Shim, Camshaft
Shim, Camshaft (is

Short Block,
02)
Standard
_25" oversize
_50" oversize

(Includes #7)
required)

Shim, Camshaft as required)
Shim, Camshaft as required)
Shim,
Shim, Camshaft/as
Camshaft as required)
requ!red)
Shim, Camshaft as requtrea)
Shaft, Balance
Piston wiring Set, Standard
Piston w/Ring Set 25" oversize
Piston w/Ring Set .50" oversize
Retainer, Piston Pin (2)
Ring Set, Standard
Ping Set °25" oversize
Ring Set .50" oversize
Connecting Rod, Standard
Connecting Rod 25" oversize
Pin, Governor Regulating
Gear, Governor Assembly
Washer, Governor Gear Thrust
Shaft, Governor Gear
Plug, Cup
Shaft, Governor Cross
Washer, Governor Shaft
Seal, Governor Cross Shaft
Washer, Plain
Pin, Governor Hitch

STARTING SYSTEM
KEY PART
NO. NO.
1 SM-0839065
2
3
4
5
6
7
8
9

12 468
"1209B
12 755
12 755
12 227
12 170
12 086
12 243

01
05
!2
06
01
02
02
01

DESCRIPTION
Screw, Bendix Starter
M8 x 1/25 x 65.5 (2)
Washer (2)
Starter Assembly (Includes #4-10)
Kit, Drive (Includes Key Number 5)
Kit, Drive Parts
Cap, Drive End
Armature
Screw, Hex Flange
Cap, Commutator End
(Includes Key Number 10)
Kit, Brush

10 46 755 15
NOT ILLUSTRATED
52 357 01
Lubricant, Starter

NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm

49

ERVmCENOTES

5O

SUGGESTED

GUIDE FOR SUGHTUNGSLOPES FOR SAFE; OPERATUON

ONLY RIDE UP AND DOWN HILL,
NOT ACROSS HILL

SIGHTING
GUIDE

SIGHT AND HOLD THIS LEVEL WITH
SKY LINE OR TREE.

15° bIAX.

_
_ _
II_ _

Operate your Tractor up and down the face of slopes (not
greater than 15°), never across the face. lVlake turns gradu=
ally to prevent tipping or loss of control. Exercise extreme

IIL

caution when changing

direction

on slopes.

®

OWNER'S
MANUAL

MODEL NO.
917.255692

14.0 HP OHV
ELECTRIC START
3 in One ConvertJbUe
42"
OWER
ECK
6 SPEE
TRANSAXLE
LAWN TRACTO
Each tractor has its own model number. Each engine has its own model
number,

The model number for your tractor will be found on the modet plate
located under the seat.

The model number' for your engine will be found on the blower housing.
All parts listed herein may be ordered from any Sears, Roebuck and Co.
Service Centers and most Retail Stores.

HOW TO ORDER
REPAIR PARTS

WHEN ORDERING REPAIR PARTS, ALWAYS
ING INFORMATION:
• PRODUCT-

GIVE THE FOLLOW-

LAWN TRACTOR

° MODEL NUMBER - 917o255692
° ENGINE MODEL NUMBER - CV 14, TYPE NUMBER PS 1445
° PART NUMBER
" PART DESCRIPTION
Your Sears merchandise has added value when you consider Sears has
service units nationwide staffed with Sears trained technicians .... professional technicians specifically trained to insure that we meet our pledge
to you, we service what we see

Sears, Roebuck
136219

Rev. 2

06.09,92

and Co., Chicago,

IL 60684 U.S.A.
PRINTED IN U,S,A°



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 52
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 4, 0, 0, 13
Create Date                     : Mon Jul 21 02:48:46 2008
Author                          : 
Title                           : 
Subject                         : 
EXIF Metadata provided by EXIF.tools

Navigation menu