Crane Payment Innovations ONETRACK RFID system User Manual FLST0310 F

MEI RFID system FLST0310 F

User Manual

 2015 Crane Payment Innovations Part No# UG-FLST0310_F 06/15 Functional GroundingChassis Grounding5. General Specifications: 5.1. Electrical Specifications: Operating Voltage Continuous Current Maximum Current 12 V DC/ 24 V DC 1.0 A 3 A Use only current limiting CSA or UL recognized CLASS 2 Power Supply. 5.2. Operating Temperature: 0° ~ 50 ° C (32° ~ 122 °F) 5.3. Total Weight: Less than 3.5 Kg (7.72 lb) 5.4. Features: Multi Width 62~85 mm Validator Head Short Slide Housing Multi I/O Dual Operating Voltage Contactless Reader for Cassette FLS Cassette with RFID Tag 5.5. Enclosed: Onetrack Enabled Housing Assembly Validating Head (Part # FLSV-0003) Mounting Kit ((Part# OPT-MKFLS-HS) FLS Cassette with RFID Tag (Part# FLSCT0002) User's Guide 5.6. Applicable Patents: 6229317, 6163034, 7104383, 6057683 CPI | Crane Payment Innovations 2720 Steeles Ave. West, Units 2-3 Concord, ON, Canada, L4K 4S3 Phone: +1 905 303-8874 Toll Free: +1 800 584-2633 Fax: +1 905 303-8875 Website: www.cranepi.com http://support.cashcode.com FrontLoad Bill Validator (Onetrack™ Enabled) FLST0310 User’s Guide Note: 1) During shipment, switch# 2.3 set to On (Onecheck mode), unless specified by customer. 2) If Harness not supplied, 4 cables from housing requires to be installed on 24 Pin. 3) Default Machine No and Location No to be set to “000000”.
 2015 Crane Payment Innovations 1. Interface Connector Pin out: View from the back of the validator Mating connector CashCode P/N: o 24 Pin socket: 0100455 o Terminal M1189-2 (JAE P/N DR-SC24-1-7000) TERMINAL SIGNAL FUNCTION 1 GROUND GROUND BUS 2 RxD-EXT RECEIVE DATA (RS232) 3 TxD-EXT TRANSMIT DATA (RS232) 4 VCC POWER 5 GND GROUND 6 RXD-EXT1 RECEIVE DATA 7 GND-EXT/EXT1 INTERFACE GROUND (RS232) 8 TXD-EXT1 TRANSMIT DATA 9 RS485-A RS485 BUS 10 RS485-B RS485 BUS 11 INP-RXD INPUT SIGNAL 12 INP-TTL1 INPUT SIGNAL 13 POWER- POWER 0V 14 INP-TTL2 INPUT SIGNAL 15 OC-TXD OUTPUT SIGNAL (OPEN-COLLECTOR ) 16 OC-OUT1 OUTPUT SIGNAL (OPEN-COLLECTOR ) 17 C-LED-BDP / OC-OUT2 LED CATHODE/ OUTPUT SIGNAL (OPEN-COLLECTOR ) 18 A-LED-BDP LED ANODE 19 POWER+ POWER 12V/24V 20 TXD-BDP TRANSMIT DATA (OPTO) 21 RXD-BDP RECEIVE DATA (OPTO) 22 RST-BDP MASTER RESET (OPTO) 23 GND-BDP INTERFACE GND (OPTO) 24 +12V BDP INTERFACE POWER (OPTO) We recommend to ground line 1 on the main frame. Also, Interface ground line must be separate from Power (0 V) ground 2. Typical DIP Switches Setting, Currency and Protocol Information: Please refer to Software Description. 3. Diagnostics: This diagnostics chart is for reference only. Please refer to Software Description for details. NO OF STATUS LIGHT FLASHES ERROR DESCRIPTION HARDWARE 1 RED ON BLACK CASSETTE IS REMOVED FROM BILL VALIDATOR 2 RED ON BLACK AN ERROR OCCURRED DURING CPU EXCHANGE WITH MAGNETIC BOARD 3 RED ON BLACK CASSETTE IS FULL 4 RED ON BLACK MECHANICAL JAM IN THE CASSETTE OR STACKER MOTOR FAILURE 5 RED ON BLACK FAILURE OF DIELECTRIC SENSORS 6 RED ON BLACK FAILURE OF OPTICAL SENSORS 7 RED ON BLACK FAILURE OF INDUCTIVE SENSORS 8 RED ON BLACK FAILURE OF TRANSPORTING MOTOR 9 RED ON BLACK SPEED OF TRANSPORTING MOTOR IS TOO FAST 10 RED ON BLACK FAILURE IN ALIGNMENT MECHANISM 11 RED ON BLACK BILL PATHWAY IS NOT EMPTY 12 RED ON BLACK BILL JAMMED IN ENTRY SLOT OF THE CASSETTE. NO CREDIT GIVEN 13 RED ON BLACK OVERLOAD OF TRANSPORT MOTOR 14 RED ON BLACK SYSTEM ERROR SOFTWARE 1 GREEN ON RED UNABLE TO WRITE PROGRAM MEMORY 2 GREEN ON RED FIRMWARE INTEGRITY ERROR 3 GREEN ON RED WRONG MEMORY CARD 4 GREEN ON RED SECURITY ERROR Onetrack FLICKER X 1 CASH BOX IS HOT OR MACHINE# IS MISMATCH FLICKER X 2 ONETRACK CASH BOX / ANTENNA BOARD MODULE ERROR 4. FCC and IC Information: FCC ID # QP8ONETRACK. IC # 1297A-ONETRACK. Changes or modifications not approved by the manufacturer could void the user’s authority to operate the equipment. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference. (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage. (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. 7161213 1819 24

Navigation menu