Creative Labs WMU95S0103E Wireless Optical Mouse User Manual

Creative Labs Inc Wireless Optical Mouse Users Manual

User Manual

Note: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.
Revision History RevisionDescriptions Preparedby Date1.1 Low battery blue LED at receiver MLK 10/05/041.2 Text format put up modify MLK 10/27/04Part 1.0: General features and description -Prevent Repetitive Strain Injury on your wrists and arms. -Radio frequency : 27.045 MHz、27.195MHz, two channels with 256 IDs per channel, no moreproblems with radio frequency interference . -Battery type: 2 AA alkaline batteries for mouse -Mouse resolution : 800cpi -Sensor detects movement on all kinds of surface,a* including wood, plastics, pants, etc… ( Highly reflective surfaces like mirror or deep dark color may not work properly). -The ergonomically designed shaped provides easy control for both right hand and left hand -Works under Windows 98/98SE/Me/2000/XP -The left, right and scroll wheel buttonscan be programmed to perform a variety of functions tospeed up daily tasks.Part 2.0: System Requirements.IBM PC or compatible systemPart 3.0: Preface The functionality and performance requirements related to the mouse are defined in this specification. Part 4.0: Version-USB (1.1version) and PS/2 interface Part 5.0: Physical characteristics and configuration Item 5.1: Dimension Mouse: 125mm(L) x 77mm(W) x 40.87mm(H) Receiver: 80mm(L) x 59.5mm(W) x 25.85mm(H)DR： Sam CHECK：APPD：
Mouse:Receiver:Item 5.2: Material Mouse Body ABSBeside face(3) Rubber paintWheel RubberItem 5.3: Finish: TextureDR： Sam CHECK：APPD：
Item 5.4: Color: To be defined by ID Item 5.5: Button Mouse: 3 Buttons with scrolling wheel, 1 CONNECT button. Item 5.6: Mechanical Performance 5.6.1 Operating force of mouse buttons: 70 ±15gf5.6.2 Operating force of browser switches: 170 ± 25gf 5.6.3 Operating force of wheel scrolling: 20 ±10gf5.6.4 Operating force of moving mouse:80 ±10gf5.6.5 Mouse weight(include batteries): 130±5g5.6.6 Receiver weight:71±5gPart 6.0: Electrical specification Item 6.1: CompatibilityThe USB mode uses the low speed interface as defined in the USB specification. It is compliant to the USB specification and HID class specification. - The USB mode shall be compatible with IBM PC/PENTIUM and works with operating system such as Windows 98/98SE /2000/ME/XP as well as the most software applications. Item 6.2: Technicalities of Mouse The mouse's optical sensor works for X and Y axis.The accurate sensor detectsmovement onhundred of surfaces*, including wood, plastic and even the surface of your pants. The wheel buttonuses a mechanical encode to work. * Not including reflective surfaces such as mirrors or glass. Item 6.3: Sensor Report Rate on Mouse 2300 times per second Item 6.4: Sensor Light on mouse Red LED Item 6.5: Power Requirement (Receiver) 5V/ DC 50mA directly from computer's USB port Item 6.6: Operating AngleThe mouse operating angle is 360 degrees. Item 6.7: Operating DistanceThe operation distance from mouse to the receiver is up to 1.8meters, under typical officeenvironment.Item 6.8: To change Channel and ID The ID and channel are changed by the CONNECT button. Press the Connect button and the RF Receiver followedby the Connect button on the mouse. Repeatthisstep when experiencing interference while using this product, changing the batteries or using this product for the first time. Make sure you press the Connect button on the mouse within 10 sec after you press the ConnectDR： Sam CHECK：APPD：
button on the RF Receiver.Item 6.9: Battery6.9.1 Battery TypeThe mouse use two AA alkaline batteries. 6.9.2 Battery Consumption Operating mode: ＜40mA @ 3.0V （white paper）Sleep Mode 1: <4.0mA @ 3.0V (white paper) If the mouse is not used for approximately 3 seconds. Sleep mode 2: <0.5mA @ 3.0V (white paper)when not in use for approximately 8 minutes. 6.9.3: Battery saving mode : longer battery life 6.9.4: LED Indicator Function. 6.9.51: Low Battery indication If the blue LED on the receiver is flashing while working, this indicate that the battery is low involtage, you will need to change the batteries. 6.9.52: Indication of mouse function: 1)Receiver LEDdoesnotlight up when it is connected to the PC 2) LED will flash for about 10 seconds when connected. 3) LED will light up when the mouse is being used. 4) LED will not light up when there is no mouse movement or when the buttons are not clicked.Item 6.10: Tracking SpeedThe unit shall be capable of tracking between50mm/s and 350mm/s of hand movement on the matt white paper without loss of data.Item 6.11: Mouse Sensor Features -Optical motion estimation technology -Complete 2D motion sensor -No mechanical moving parts-Accurate motion estimation over a wide range of surfaces -High speed motion detection up to 14 inches/sec -High resolution up to 800cpi Part 7.0: Reliability and environmental specificationItem 7.1: Button SwitchActivationCondition: 3 cycles per second. Testing method: a small DC motor fixed with cam automatically presses the button for three times persecond. The switch isconnected to a calculator. The number displayed on the calculator shows the pressed cycle of the button. Result: button tested have a liftcycle of more than 1,000,000.00. Item 7.2 : Cable Bending StrengthCondition: Cable load at 100gram, Testingmethod: bend 60 degrees in any direction from its centerlineat a speed of 30 cycles/min. 1000cycles.DR： Sam CHECK：APPD：
Result: No visible damage and no breakage in each wire. Item 7.3: Drop Shock with Bare Unit Condition: Drop the unit from a height of 76cm from the floor Testing method: drop the unit on top, bottom and 4 side of the unit ( 1 time for each side). Result:The unit function properly without any mechanical failure. Item 7.4: Drop Shock in Gift box Condition: Unit have been packed with gift box Testing method: Drop the unit from a height of 91cm onto floor, from the angles of the 4 corners and the 6 sides of the box (1 time for each side) Result: no content escape from packaging.Item 7.5: Temperature / Humidity Test7.4.1 Non-operating temperature/humidity cycle test Storage at the following conditions: 1)65 degrees Celsius / 95% RH (24hrs) 2)65 degrees Celsius / 10% RH (24hrs) 3) –20 degrees Celsius (24hrs) 7.4.2 Operating temperature / humidity test Performed dynamic burn-in at the following conditions: 1)45 degrees Celsius / 80%RH (8hrs) 2)45 degrees Celsius / 10%RH (8hrs) 3)0 degrees Celsius (8hrs) Item 7.6: Heat Cycle Test for Shipment Pattern Condition: N/A Testing method: -40 degrees Celsius to 65 degrees Celsius under 0% to 90% relative humidity with totaltime of 40 hours, and then left under room temperature for 2 hours. Result:The unit work properly Item 7.7: Vibration TestUnit shall survive a vibration within a frequency range of 10 to 200Hz at 0.015 square of g/Hz and 200to 500 Hz at –6dB/oct for X,Y,and Z axis and 0.5 hour per axis. Part 8.0: Product ComplianceItem8.1:ActualComplianceLabel Mouse :DR： Sam CHECK：APPD：
Size:34X41.2mmMADE INCHINAModl: WMU95SeRating: 3V 50mAOpticalMouse3500Size:19.5X25mm Size:35.5X8mmReceiver:Size: 21.5x32.5mmMADE IN CHINAModl: WMU95SeRating: 5V 50mAOptical ouse ReceiverM3500DR： Sam CHECK：APPD：

Navigation menu