Creative Labs WMU95S0103E Wireless Optical Mouse User Manual

Download:
Mirror Download [FCC.gov]
Document ID	489064
Application ID	nxUhtwxfaaCP8ukpMF2N9w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.89kB (211114 bits)
Date Submitted	2004-11-17 00:00:00
Date Available	2004-11-17 00:00:00
Creation Date	2004-11-10 20:49:51
Producing Software	pdfFactory Pro 2.22 (Windows XP Chinese)
Document Lastmod	0000-00-00 00:00:00
Document Title	Users Manual.doc
Document Creator	pdfFactory Pro www.fineprint.com.cn
Document Author:	Apollo

Note:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Caution:
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user authority to operate the
equipment.
Revision History
Revision Descriptions
1.1
Low battery blue LED at receiver
Text format put up modify
1.2
Prepared by
MLK
MLK
Date
10/05/04
10/27/04
Part 1.0: General features and description
Prevent Repetitive Strain Injury on your wrists and arms.
Radio frequency : 27.045 MHz、27.195MHz, two channels with 256 IDs per channel, no more
problems with radio frequency interference .
Battery type: 2 AA alkaline batteries for mouse
Mouse resolution : 800cpi
Sensor detects movement on all kinds of surface, a* including wood, plastics, pants, etc… ( Highly
reflective surfaces like mirror or deep dark color may not work properly).
The ergonomically designed shaped provides easy control for both right hand and left hand
Works under Windows 98/98SE/Me/2000/XP
The left, right and scroll wheel buttons can be programmed to perform a variety of functions to
speed up daily tasks.
Part 2.0: System Requirements
. IBM PC or compatible system
Part 3.0: Preface
The functionality and performance requirements related to the mouse are defined in this specification.
Part 4.0: Version
USB (1.1version) and PS/2 interface
Part 5.0: Physical characteristics and configuration
Item 5.1: Dimension
Mouse: 125mm(L) x 77mm(W) x 40.87mm(H)
Receiver: 80mm(L) x 59.5mm(W) x 25.85mm(H)
DR： Sam
CHECK：
APPD：
Mouse:
Receiver:
Item 5.2: Material
Mouse
Body
ABS
Beside face(3)
Rubber paint
Wheel
Rubber
Item 5.3: Finish: Texture
DR： Sam
CHECK：
APPD：
Item 5.4: Color: To be defined by ID
Item 5.5: Button
Mouse: 3 Buttons with scrolling wheel, 1 CONNECT button.
Item 5.6: Mechanical Performance
5.6.1 Operating force of mouse buttons: 70 ±15gf
5.6.2 Operating force of browser switches: 170 ± 25gf
5.6.3 Operating force of wheel scrolling: 20 ± 10gf
5.6.4 Operating force of moving mouse:80 ± 10gf
5.6.5 Mouse weight(include batteries): 130± 5g
5.6.6 Receiver weight:71± 5g
Part 6.0: Electrical specification
Item 6.1: Compatibility
The USB mode uses the low speed interface as defined in the USB specification. It is compliant to the
USB specification and HID class specification.
- The USB mode shall be compatible with IBM PC/PENTIUM and works with operating system such as
Windows 98/98SE /2000/ME/XP as well as the most software applications.
Item 6.2: Technicalities of Mouse
The mouse's optical sensor works for X and Y axis. The accurate sensor detects movement on
hundred of surfaces*, including wood, plastic and even the surface of your pants. The wheel button
uses a mechanical encode to work.
* Not including reflective surfaces such as mirrors or glass.
Item 6.3: Sensor Report Rate on Mouse
2300 times per second
Item 6.4: Sensor Light on mouse
Red LED
Item 6.5: Power Requirement (Receiver)
5V/ DC 50mA directly from computer's USB port
Item 6.6: Operating Angle
The mouse operating angle is 360 degrees.
Item 6.7: Operating Distance
The operation distance from mouse to the receiver is up to 1.8meters, under typical office environment.
Item 6.8: To change Channel and ID
The ID and channel are changed by the CONNECT button.
Press the Connect button and the RF Receiver followed by the Connect button on the mouse. Repeat
this step when experiencing interference while using this product, changing the batteries or using this
product for the first time.
Make sure you press the Connect button on the mouse within 10 sec after you press the Connect
DR： Sam
CHECK：
APPD：
button on the RF Receiver.
Item 6.9: Battery
6.9.1 Battery Type
The mouse use two AA alkaline batteries.
6.9.2 Battery Consumption
Operating mode: ＜40 mA @ 3.0V （white paper）
Sleep Mode 1: <4.0mA @ 3.0V (white paper) If the mouse is not used for approximately 3 seconds.
Sleep mode 2: <0.5mA @ 3.0V (white paper) when not in use for approximately 8 minutes.
6.9.3: Battery saving mode : longer battery life
6.9.4: LED Indicator Function.
6.9.51: Low Battery indication
If the blue LED on the receiver is flashing while working, this indicate that the battery is low in
voltage, you will need to change the batteries.
6.9.52: Indication of mouse function:
1)Receiver LED does not light up when it is connected to the PC
2) LED will flash for about 10 seconds when connected.
3) LED will light up when the mouse is being used.
4) LED will not light up when there is no mouse movement or when the buttons are not clicked.
Item 6.10: Tracking Speed
The unit shall be capable of tracking between 50mm/s and 350mm/s of hand movement on the matt
white paper without loss of data.
Item 6.11: Mouse Sensor Features
Optical motion estimation technology
Complete 2D motion sensor
No mechanical moving parts
Accurate motion estimation over a wide range of surfaces
High speed motion detection up to 14 inches/sec
High resolution up to 800cpi
Part 7.0: Reliability and environmental specification
Item 7.1: Button Switch Activation
Condition: 3 cycles per second.
Testing method: a small DC motor fixed with cam automatically presses the button for three times per
second. The switch is connected to a calculator. The number displayed on the
calculator shows the pressed cycle of the button.
Result: button tested have a lift cycle of more than 1,000,000.00.
Item 7.2 : Cable Bending Strength
Condition: Cable load at 100gram,
Testing method: bend 60 degrees in any direction from its centerline at a speed of 30 cycles/min. 1000
cycles.
DR： Sam
CHECK：
APPD：
Result: No visible damage and no breakage in each wire.
Item 7.3: Drop Shock with Bare Unit
Condition: Drop the unit from a height of 76cm from the floor
Testing method: drop the unit on top, bottom and 4 side of the unit ( 1 time for each side).
Result: The unit function properly without any mechanical failure.
Item 7.4: Drop Shock in Gift box
Condition: Unit have been packed with gift box
Testing method: Drop the unit from a height of 91cm onto floor, from the angles of the 4 corners and the
6 sides of the box (1 time for each side)
Result: no content escape from packaging.
Item 7.5: Temperature / Humidity Test
7.4.1 Non-operating temperature/humidity cycle test
Storage at the following conditions:
1) 65 degrees Celsius / 95% RH (24hrs)
2) 65 degrees Celsius / 10% RH (24hrs)
3) –20 degrees Celsius (24hrs)
7.4.2 Operating temperature / humidity test
Performed dynamic burn-in at the following conditions:
1) 45 degrees Celsius / 80%RH (8hrs)
2) 45 degrees Celsius / 10%RH (8hrs)
3) 0 degrees Celsius (8hrs)
Item 7.6: Heat Cycle Test for Shipment Pattern
Condition: N/A
Testing method: -40 degrees Celsius to 65 degrees Celsius under 0% to 90% relative humidity with total
time of 40 hours, and then left under room temperature for 2 hours.
Result: The unit work properly
Item 7.7: Vibration Test
Unit shall survive a vibration within a frequency range of 10 to 200Hz at 0.015 square of g/Hz and 200
to 500 Hz at –6dB/oct for X,Y, and Z axis and 0.5 hour per axis.
Part 8.0: Product Compliance
Item8.1: Actual Compliance Label
Mouse :
DR： Sam
CHECK：
APPD：
Optical Mouse
3500
Mod e l: WM U9 5S
Ra ting: 3V
50mA
MADE IN C HINA
Size:34X41.2mm
Size:19.5X25mm
Size:35.5X8mm
Receiver:
Op tic al Mouse Receiv er
3500
Mod e l: WMU95 S
Rati ng: 5V
50mA
MADE IN CHINA
Size: 21.5x32.5mm
DR： Sam
CHECK：
APPD：

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Title                           : Users Manual.doc
Author                          : Apollo
Creator                         : pdfFactory Pro www.fineprint.com.cn
Producer                        : pdfFactory Pro 2.22 (Windows XP Chinese)
Create Date                     : 2004:11:10 20:49:51
Page Count                      : 7

EXIF Metadata provided by EXIF.tools