D Link CHG022A1 mydlink Connected Home Hub , mydlink Home Connected Home Hub 2 User Manual rev

Download:
Mirror Download [FCC.gov]
Document ID	3185034
Application ID	rcZGOn9FspxcIE/BQI0Irw==
Document Description	User Manual rev
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	78.87kB (985886 bits)
Date Submitted	2016-11-03 00:00:00
Date Available	2016-11-03 00:00:00
Creation Date	2016-11-02 19:49:15
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2016-11-02 19:49:15
Document Title	Microsoft Word - DCH-G022_A1_Manual_v1.00_WW_-Update
Document Creator	PScript5.dll Version 5.2.2
Document Author:	nilin

Version 1.00| 8/24/2016
User Manual
mydlink™ Connected Home Hub
DCH‐G022
Preface
D‐Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization
of such revisions or changes.
Manual Revisions
Revision
Date
1.00
July 2, 2016
Description
• Initial Release
Trademarks
D‐Link and the D‐Link logo are trademarks or registered trademarks of D‐Link Corporation or its subsidiaries in the United States or other countries.
All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Apple®, Apple logo®, Safari®, iPhone®, iPad®, iPod touch® and Macintosh® are trademarks of Apple Inc., registered in the U.S. and other countries. App
StoreSM is a service mark of Apple Inc. Chrome™ browser, Google Play™ and Android™ are trademarks of Google Inc. Internet Explorer®, Windows®
and the Windows logo are trademarks of the Microsoft group of companies.
Copyright © 2016 by D‐Link Corporation, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed
written permission from D‐Link Corporation, Inc.
Power Usage
This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power‐saving Network
Standby mode within 1 minute of no packets being transmitted. If it is not needed during certain periods of time, it can be unplugged to save
energy.
Network Standby: watts
D‐Link DCH‐G022 User Manual
Table of Contents
Table of Contents
Preface ...................................................................... i
Manual Revisions .............................................................. i
Trademarks ....................................................................... i
Power Usage .................................................................. i
Product Overview ..................................................... 1
Package Contents ......................................................... 1
System Requirements ...................................................... 2
Introduction ..................................................................... 3
Hardware Overview ......................................................... 4
Front/Top ...................................................................... 4
Side and Bottom ..................................................... 5
Wireless Installation Factors ............................................ 6
Hardware Installation....................................................... 7
Mounting Your Device (Optional) ........................... 7
Setting Up Your Device ................................................. 9
Advanced Configuration ...........................................20
Firmware Upgrade ......................................................... 21
Factory Default .............................................................. 22
Z‐Wave Main .................................................................. 23
Z‐Wave Nodes............................................................. 24
Troubleshooting ......................................................25
Technical Specifications ............................................26
Regulatory Information ............................................27
mydlink™ Home ...................................................... 11
My Devices ..................................................................... 11
Schedule ..................................................................... 12
Information .................................................................... 14
My Actions ..................................................................... 15
My Places ....................................................................... 18
D‐Link DCH‐G022 User Manual
ii
Section 1 ‐ Product Overview
Product Overview
Package Contents
DCH‐G022 mydlink™ Connected Home Hub
Quick Install Card
Quick Install Card
Power Adapter
Ethernet Cable
Warranty Document
If any of the above items are missing from your package, please contact your reseller.
D‐Link DCH‐G022 User Manual
Section 1 ‐ Product Overview
System Requirements
General Requirements
• Wireless router with Internet Service
• An available power outlet
Mobile Requirements
• iPhone, iPad, or Android smartphone or tablet1
Please refer to the mobile app’s store page to check whether your device is compatible.
D‐Link DCH‐G022 User Manual
Section 1 ‐ Product Overview
Introduction
Features
Use Motion Detection to Automatically Turn on Your Appliances
The DCH‐G022 mydlink™ Connected Home Hub is a Z‐Wave gateway used to control a variety of Z‐Wave sensors for home
automation. The DCH‐G022 communicates with other Z‐Wave and D‐Link Connected Home devices, letting you manage your
home automation system on a single platform either at home or on‐the‐go. Simply put, the DCH‐G022 is the control center to
your home automation system.
Z‐Wave and HNAP Protocol Support
The DCH‐G022 supports sensors and devices using either Z‐Wave or HNAP protocols. This makes it compatible with not only
D‐Link’s own Connect Home devices, but products from other manufacturers as well.
mydlink™ Home
Manage your compatible sensors and connected appliances by using the mydlink™ Home app available for iPhone®, iPad®, and
iPod touch® and Android™ devices. Its intuitive user interface and simple instructions lets you easily schedule your automated
devices and get instant notifications from wherever you are.
Simple Setup
Through its easy‐to‐use mydlink™ Home app, you can quickly and easily connect the DCH‐G022 to an existing network. The
setup wizard will even guide you through the process, so you can get your home automation devices up and running in no time.
D‐Link DCH‐G022 User Manual
Section 1 ‐ Product Overview
Hardware Overview
Front/Top
LED
Reset Button
D‐Link DCH‐G022 User Manual
Solid Green
The device is connected to the network.
Solid Orange
The device is not connected to the network.
Flashing Orange
WPS or Z‐Wave pairing/unpairing is underway.
Solid Red
The device is defective.
Light Off
The device is powered off.
Pressing the reset button for 10 seconds will reset the DCH‐G022 to the factory default settings.
Section 1 ‐ Product Overview
Hardware Overview
Side and Bottom
USB Port
Features using this port may be provided in the future.
LAN Ports
Connect to your router using an Ethernet cable.
WPS/Pair Button Pressing the WPS button for 1 second allows you to connect with Wi‐Fi clients using Wi‐Fi Protected Setup
Power Input
D‐Link DCH‐G022 User Manual
Connect the included 5 V/2 A power adapter to power the device.
Section 2 ‐ Installation
Wireless Installation Factors
The mydlink™ Connected Home Hub lets you automate appliances using your existing wireless network. Keep in mind, however,
that the number, thickness, and location of walls, ceilings, or other objects that the wireless signals must pass through, may
limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your
home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the extender and other network devices to a minimum ‐ each wall or
ceiling can reduce your adapter’s range by up to 98 feet (30 meters). Position your devices so that the number of walls or
ceilings is minimized.
2. Be aware of the direct line between network devices. At a 45‐degree angle, a wall that is 0.5 meters thick (1.5 feet)
appears to be almost 1 meter (3 feet) thick. At a 2‐degree angle it can appear over 14 meters (45 feet) thick! Position
devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
3. Building materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try
to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways.
Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and
concrete can degrade your wireless signal.
4. Keep your product away (at least 3‐6 feet or 1‐2 meters) from electrical devices or appliances that generate RF noise.
5. If you are using 2.4 GHz cordless phones or X‐10 (wireless products such as ceiling fans, lights, and home security
systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base
is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.
D‐Link DCH‐G022 User Manual
Section 2 ‐ Installation
Hardware Installation
Mounting Your Device (Optional)
Step 1:
Place the mounting bracket where you want to position the hub
and use a pencil to mark the holes.
Step 2:
Depending on the material of the wall or ceiling, use proper tools
to drill two holes 25 mm deep with a 6 mm drill bit where you
marked. After drilling the holes, insert plastic anchors to support
the screws.
Step 3:
If desired, cables can be concealed behind the mounting bracket.
Run cables through the large hole on the mounting bracket. Be
sure to leave enough cable length protruding to allow connection
to the hub’s ports.
D‐Link DCH‐G022 User Manual
Section 2 ‐ Installation
Step 4:
Fasten the mounting bracket to the wall using the screws provided.
Step 5:
Line up the holes on the device with the tabs on the mount
and slide the device towards the wall to fasten the hub to the
mounting bracket. Connect the power cable to the hub.
D‐Link DCH‐G022 User Manual
Section 2 ‐ Installation
Setting Up Your Device
To install your DCH‐G022, first download and install the mydlink™ Home app on your mobile device. This app will walk you through
installing and configuring your DCH‐G022.
Step 1:
On your mobile device, download mydlink Home by going to
mydlinkhomeapp.dlink.com, or by searching for mydlink
Home in the App Store or Google Play.
Step 2:
Launch the mydlink Home app and create a new account or sign
in to your existing account.
Note:
iOS: If you are asked about allowing the app to access your
location, select Allow.
Android: Make sure location services are turned on in your
phone’s settings.
Step 3:
After logging in, tap the Settings icon in the top‐left corner,
select Add New Device, and follow the instructions.
Step 4:
When you are asked to scan a QR code, use the code on the Quick
Install Card in your package.
Step 5:
Follow the instructions in the app to set up your DCH‐G022.
D‐Link DCH‐G022 User Manual
Section 2 ‐ Installation
Once you have set up your DCH‐G022, you can tap on the device
icon to view information such as your network details and also
perform a factory reset.
Please consult your devices’ instruction manual to connect it to
your mydlink™ Connected Home Hub.
After you have paired your Connected Home device with the
DCH‐G022, you can customize your home’s automation policies.
• To create new policies for devices connected to your
DCH‐G022, please go to My Actions on page 15.
• To create a new group of devices connected to your
DCH‐G022, please go to My Places on page 18.
D‐Link DCH‐G022 User Manual
10
Section 3 ‐ Usage
mydlink™ Home
My Devices
Tapping a connected device under the My Devices page will take you to the device’s settings.
Motion Enable or disable motion detection.
Detection:
Last Detection: Displays the last time the sensor detected motion.
Sensitivity: Adjust the sensitivity of the sensor to motion.
Information: This page will show detailed information about the
product and your network. You can also perform a
factory reset here by tapping Reset.
To change the device name or associated icon, tap the name or
the icon respectively, and enter the new name or use the menu
to select the new icon.
D‐Link DCH‐G022 User Manual
11
Section 3 ‐ Usage
Schedule
You can customize schedules for when your DCH‐G022 will be active in this section.
There are two types of schedules you can configure: Basic and
Advanced.
The Basic type lets you set a specific time and cycle for select days.
The Advanced type lets you specify different timeframes for each
day of the week.
Tapping + on the top right corner of the Basic schedule page will
take you to the next page where you can select the active days,
Start and End time, and Cycle (or duration) that the device will
be active. This type of schedule is suited for schedules using the
same Start and End times and Cycle for each day.
D‐Link DCH‐G022 User Manual
12
Section 3 ‐ Usage
Tapping + on the top right corner of the Advanced schedule page
will take you to the page where you can select different days and
times that the device will be active in a table. Simply tap and drag
the bars in the table to adjust the times. Tap x to delete a specific
time.
After the schedule is set, go back to the previous page and tick
the radio button next to the rule to activate it.
D‐Link DCH‐G022 User Manual
13
Section 3 ‐ Usage
Information
This page shows your product and related network details.
Product Name: Displays the product model.
mydlink Num‐ Displays the mydlink number assigned to this
ber: device.
MAC Address: Displays the MAC address of the device.
IP Address: Displays the LAN IP Address of the device.
Firmware Displays the version of the firmware.
Version:
Factory Reset: Tap Reset to perform a factory reset.
D‐Link DCH‐G022 User Manual
14
Section 3 ‐ Usage
My Actions
This page lets you add and enable/disable rules which execute actions such as notifications when your DCH‐G022 detects
motion. Tap
to switch between pages.
1. To add a new action for you device, tap on New action.
2. Type in a name for this action. Tap Done when you’ve finished
inputting the name.
3. To select the device you want to use as the trigger for this action,
tap + then choose from the list of devices.
D‐Link DCH‐G022 User Manual
15
Section 3 ‐ Usage
4. Select from the available conditions for this device and tap
Next.
5. Tap + to select from the available responders for this device.
D‐Link DCH‐G022 User Manual
16
Section 3 ‐ Usage
6. Select from the available responders for this device. In this
example we have chosen to send a notification.
7. Check the action settings and tap Done to finish.
8. To delete the rule, simply swipe right on the rule to show the
trash icon. Tap on the icon to delete it.
D‐Link DCH‐G022 User Manual
17
Section 3 ‐ Usage
My Places
This page lets you add devices into a group so you can easily see which devices are in a particular location.
1. To create a group, tap New group.
2. On the New Group page, tap the icon to choose an icon or
photo for the group. Tap next to it to enter a name for the group.
Then tap the + icon to add devices.
3. Tick the devices to be included in this group and tap Done.
D‐Link DCH‐G022 User Manual
18
Section 3 ‐ Usage
4. Your group is created and will show up in My Places. Tapping
each device in the group will take you to their settings. You can
tap the icon to activate/deactivate the device.
D‐Link DCH‐G022 User Manual
19
Section 3 ‐ Usage
Advanced Configuration
The DCH‐G022 has a web configuration for users who wish to set advanced settings. To go to the configuration page, open
your browser and enter the IP address of your Z‐Wave hub.
For the User Name, enter admin.
For the password, enter the 6‐digit PIN code on the device label.
D‐Link DCH‐G022 User Manual
20
Section 3 ‐ Usage
Firmware Upgrade
To upgrade the firmware on your DCH‐G022, visit the D‐Link support website at http://support.dlink.com/ and download
the latest firmware file for your device. You can then upload the file from this page to being the upgrade process.
D‐Link DCH‐G022 User Manual
21
Section 3 ‐ Usage
Factory Default
To reset your DCH‐G022 to its factory default settings, click Restore Factory Defaults. You also have the option to reset the
device settings without removing configurations for your Z‐Wave controller by clicking Partial Reset.
D‐Link DCH‐G022 User Manual
22
Section 3 ‐ Usage
Z‐Wave Main
The Z‐Wave Main page lets you manage Z‐Wave devices connected to your DCH‐G022.
Include New A device must be “included” to the Z‐Wave
Device: network before it can be controlled via
Z‐W ave(DCH‐G022). This process (also known
as “pairing” and “adding”) is achieved by
pressing/(hold for 5 seconds) “Wireless button”
Exclude De‐ on DCH‐G022 or pushing the [Include NEW
vice: Device]([Exclude Device]) button on GUI
being into the inclusion(exclusion) mode.
(How to add/remove another Controller
(a secondary Controller): same as
including a Z‐wave node.)
Learning Starts the learning mode for DCH‐G022 when it
Mode: is to be included in another controller’s network.
Reset Z‐Wave
Controller: Reset the Z‐Wave controller.
Abort:
Node ID:
Home ID:
Node Informa‐
tion:
ZW_Capability:
SUC_ID:
Display the node ID of the DCH‐G022
Display the current Home ID of the DCH‐G022
Display the basic type, generic type
and specific type of DCH‐G022.
the Z‐Wave capabilities of DCH‐G022
the ID of Static Update Server
D‐Link DCH‐G022 User Manual
23
Section 3 ‐ Usage
Z‐Wave Nodes
This page lets you manage the advanced features of other Z‐Wave sensors.
To remove the failed node:
To replace the failed node.
Send the BASIC SET ON command to switch the node ON.
Send the BASIC SET OFF command to switch the node OFF.
Send the BASIC GET command to the selected node.
(Security) Node is included by DCH‐G022 with security
(Non‐Security) Node is included by DCH‐G022 without
security
D‐Link DCH‐G022 User Manual
24
Section 5 ‐ Troubleshooting
Troubleshooting
How do I reset the DCH‐G022?
When you reset your DCH‐G022, it will change your settings back to the factory default settings. To reset the device, locate
the Reset button on the side of the device. With the device plugged in, press and hold the Reset button for about 10 seconds
until the Power LED turns red.
Why can’t I connect to my wireless router?
If you are having trouble connecting to your wireless router, try plugging the DCH‐G022 into a location that is closer to your
router. After the Power LED turns solid green, you can unplug the mydlink™ Connected Home Hub and move it to the desired location.
Where can I find the mydlink™ Home app?
You may download the free mydlink™ Home app from the App Store (iPhone, iPad, or iPod touch) or Google Play (Android).
Search for the mydlink™ Home app by typing in “mydlink Home”.
How does the mydlink™ Connected Home Hub work while I am away from home?
Remote access of the mydlink™ Connected Home Hub is enabled once you have registered and linked your DCH‐G022 through mydlink. When your
DCH‐G022 is enabled for remote access, you will be able to control it from anywhere using your iOS or Android device.*
* Your motion sensor device must be connected to your home Wi‐Fi network for remote access.
D‐Link DCH‐G022 User Manual
25
Appendix A ‐ Technical Specifications
Technical Specifications
Standards
• IEEE 802.11b
• IEEE 802.11n
• IEEE 802.11g
Network Protocols
• ARP, ICMP
• TCP/IP
• IPv4 and IPv6
• HNAP
• DHCP client
• NTP client
• Bonjour
Wireless Frequency Range 1
• 868.40 MHz (Europe / China / Singapore / South Africa / UAE)
• 908.40 MHz (United States / Canada / Mexico / Chile)
• 916.00 MHz (Israel)
• 919.80 MHz (Hong Kong)
• 921.40 MHz (Australia / New Zealand / Brazil)
• 922.50/923.90/926.30 MHz (Taiwan / JP)
Diagnostic LEDs
• Status
Operating Temperature
• 0 to 40 ˚C (32 to 104 ˚F)
Storage Temperature
• ‐20 to 70 ˚C (‐4 to 158 ˚F)
Operating Humidity
• 20% to 90% non‐condensing
Storage Humidity
• 5% to 95% non‐condensing
Power Input
• AC 100‐240 V AC, 50/60 Hz
• 5 V DC / 2 A
Power Consumption
• 8 watts maximum
Ports
• USB 2.0
• 2 x 10/100 Ethernet
Certifications
• FCC
• CE
• Z‐Wave Plus
Security
• WPS™ (PBC) & Z‐Wave pairing/unpairing
• Reset
Dimensions
• 100 x 100 x 110 mm (3.94 x 3.94 x 4.33 inches)
Device Management
• mydlink™ Home app
Frequency range varies depending on local regulations
D‐Link DCH‐G022 User Manual
26
Appendix B ‐ Regulatory Statements
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
‐
Reorient or relocate the receiving antenna.
‐
Increase the separation between the equipment and receiver.
‐
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐
Consult the dealer or an experienced radio/TV technician for help.
Non‐modifications Statement:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this
equipment.
Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
This device and its antenna(s) must not be co‐located or operating in conjunction with any other antenna or transmitter except in accordance
with FCC multi‐transmitter product procedures. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection
of other channels is not possible.
Note:
The country code selection is for non‐USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in
the USA must be fixed to USA operational channels only.
D‐Link DCH‐G022 User Manual
27
Appendix B ‐ Regulatory Statements
IMPORTANT NOTICE:
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm between the radiator and your body.
Industry Canada Statement:
This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si lebrouillage est susceptible d'en compromettre le
fonctionnement.
Radiation Exposure Statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm between the radiator and your body.
Déclaration d'exposition aux radiations
Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement
doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
D‐Link DCH‐G022 User Manual
28
Appendix B ‐ Regulatory Statements
NCC 警語：
以下警語適用台灣地區
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率
射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通
信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
D‐Link DCH‐G022 User Manual
29
Appendix B ‐ Regulatory Statements
European Union:
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. For more information, please refer to the Declaration of
Conformity.
Notice of Wireless Radio LAN Usage in The European Community:
•
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in
France where restrictive use applies. This device may not be used for setting up outdoor radio links in France and in some areas the RF output
power may be limited to 10 mW EIRP in the frequency range of 2454 –2483.5 MHz. For detailed information the end‐user should contact the
national spectrum authority in France.
This equipment may be operated in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, OL, PT, RO, SM, SE, RS, SK,
ES, CI, HU, CY
Usage Notes:
•
To remain in conformance with European National spectrum usage regulations, frequency and channel limitations will be applied on the
products according to the country where the equipment will be deployed.
D‐Link DCH‐G022 User Manual
30
Appendix B ‐ Regulatory Statements
2.4 GHz Wireless Frequency and Channel Operation in EEC Countries:
Region
Frequency Band
Max output power (EIRP)
Metropolitan
2400 ‐ 2454 MHz
100 mW
Guadeloupe, Martinique, St Pierre et
Miquelon, Mayotte
2454 ‐ 2483.5 MHz
100 mW indoor, 10 mW outdoor
Reunion et Guyane
2400 ‐ 2483.5 MHz
100 mW
Rest of EU community
2420 ‐ 2483.5 MHz
100 mW
R&TTE 1999/5/EC
WLAN 2.4 ‐ 2.4835 GHz
IEEE 802.11b/g/n
Spectrum Regulation
MHz, Europa (ETSI)
max. EIRP Innenbereich
max. EIRP Außenbereich
Europa
2400 ‐ 2483.5 MHz
100 mW
100 mW
2400 ‐ 2454 MHz
100 mW
100 mW
2454 ‐ 2483.5 MHz
100 mW
10 mW
Frankreich
D‐Link DCH‐G022 User Manual
31
Appendix B ‐ Regulatory Statements
European Community Declaration of Conformity:
Česky [Czech]
D‐Link tímto prohlašuje, že tento <###> je ve shodě se základními požadavky a dalšími příslušnými ustanoveními
směrnice 1999/5/ES.
Dansk [Danish]
Undertegnede D‐Link erklærer herved, at følgende udstyr <###> overholder de væsentlige krav og øvrige
relevante krav i direktiv 1999/5/EF.
Deutsch [German]
Hiermit erklärt D‐Link, dass sich das Gerät <###> in Übereinstimmung mit den grundlegenden Anforderungen und
den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Eesti [Estonian]
Käesolevaga kinnitab D‐Link seadme <###> vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.
English
D‐Link hereby, declares that this <###> is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Español [Spanish]
Por medio de la presente D‐Link declara que el <###> cumple con los requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Ελληνική [Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ D‐Link ΔΗΛΩΝΕΙ ΟΤΙ <###> ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ
ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français [French]
Par la présente D‐Link déclare que l'appareil <###> est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE.
Italiano [Italian]
Con la presente D‐Link dichiara che questo <###> è conforme ai requisiti essenziali ed alle altre disposizioni
pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski [Latvian]
Ar šo D‐Link deklarē, ka <###> atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem
noteikumiem.
Lietuvių [Lithuanian]
Šiuo D‐Link deklaruoja, kad šis <###> atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Nederlands [Dutch]
Hierbij verklaart D‐Link dat het toestel <###> in overeenstemming is met de essentiële eisen en de andere
relevante bepalingen van richtlijn 1999/5/EG.
Malti [Maltese]
Hawnhekk, D‐Link, jiddikjara li dan <###> jikkonforma mal‐ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti
li hemm fid‐Dirrettiva 1999/5/EC.
Magyar [Hungarian]
Alulírott, D‐Link nyilatkozom, hogy a <###> megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC
irányelv egyéb elõírásainak.
D‐Link DCH‐G022 User Manual
32
Appendix B ‐ Regulatory Statements
Polski [Polish]
Niniejszym D‐Link oświadcza, że <###> jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi
postanowieniami Dyrektywy 1999/5/EC.
Português [Portuguese]
D‐Link declara que este <###> está conforme com os requisitos essenciais e outras disposições da Directiva
1999/5/CE.
Slovensko [Slovenian]
D‐Link izjavlja, da je ta <###> v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
Slovensky [Slovak]
D‐Link týmto vyhlasuje, že <###> spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
Suomi [Finnish]
D‐Link vakuuttaa täten että <###> tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä
koskevien direktiivin muiden ehtojen mukainen.
Warning Statement:
The power outlet should be near the device and easily accessible.
D‐Link DCH‐G022 User Manual
33
Appendix B ‐ Regulatory Statements
Disposing of and Recycling Your Product
ENGLISH
EN
This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed
of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has
reached the end of its life, some will accept products for free. By recycling the product and its packaging in this manner you help to
conserve the environment and protect human health.
D‐Link and the Environment
At D‐Link, we understand and are committed to reducing any impact our operations and products may have on the environment. To minimise
this impact D‐Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both
products and packaging.
D‐Link recommends that you always switch off or unplug your D‐Link products when they are not in use. By doing so you will help to save energy
and reduce CO2 emissions.
To learn more about our environmentally responsible products and packaging please visit www.dlinkgreen.com.
DEUTSCH
DE
Dieses Symbol auf dem Produkt oder der Verpackung weist darauf hin, dass dieses Produkt gemäß bestehender örtlicher Gesetze
und Vorschriften nicht über den normalen Hausmüll entsorgt werden sollte, sondern einer Wiederverwertung zuzuführen ist. Bringen
Sie es bitte zu einer von Ihrer Kommunalbehörde entsprechend amtlich ausgewiesenen Sammelstelle, sobald das Produkt das Ende
seiner Nutzungsdauer erreicht hat. Für die Annahme solcher Produkte erheben einige dieser Stellen keine Gebühren. Durch ein auf
diese Weise durchgeführtes Recycling des Produkts und seiner Verpackung helfen Sie, die Umwelt zu schonen und die menschliche
Gesundheit zu schützen.
D‐Link und die Umwelt
D‐Link ist sich den möglichen Auswirkungen seiner Geschäftstätigkeiten und seiner Produkte auf die Umwelt bewusst und fühlt sich verpflichtet,
diese entsprechend zu mindern. Zu diesem Zweck entwickelt und stellt D‐Link seine Produkte mit dem Ziel größtmöglicher Umweltfreundlichkeit
her und verwendet wiederverwertbare, schadstoffarme Materialien bei Produktherstellung und Verpackung.
D‐Link empfiehlt, Ihre Produkte von D‐Link, wenn nicht in Gebrauch, immer auszuschalten oder vom Netz zu nehmen. Auf diese Weise helfen
Sie, Energie zu sparen und CO2‐Emissionen zu reduzieren.
Wenn Sie mehr über unsere umweltgerechten Produkte und Verpackungen wissen möchten, finden Sie entsprechende Informationen im Internet
unter www.dlinkgreen.com.
D‐Link DCH‐G022 User Manual
34
Appendix B ‐ Regulatory Statements
FRANÇAIS
FR
Ce symbole apposé sur le produit ou son emballage signifie que, conformément aux lois et règlementations locales, ce produit ne
doit pas être éliminé avec les déchets domestiques mais recyclé. Veuillez le rapporter à un point de collecte prévu à cet effet par les
autorités locales; certains accepteront vos produits gratuitement. En recyclant le produit et son emballage de cette manière, vous
aidez à préserver l’environnement et à protéger la santé de l’homme.
D‐Link et l’environnement
Chez D‐Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter
cet impact, D‐Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement
toxiques, tant dans ses produits que ses emballages.
D‐Link recommande de toujours éteindre ou débrancher vos produits D‐Link lorsque vous ne les utilisez pas. Vous réaliserez ainsi des économies
d’énergie et réduirez vos émissions de CO2.
Pour en savoir plus sur les produits et emballages respectueux de l’environnement, veuillez consulter le www.dlinkgreen.com.
ESPAÑOL
ES
Este símbolo en el producto o el embalaje significa que, de acuerdo con la legislación y la normativa local, este producto no se debe
desechar en la basura doméstica sino que se debe reciclar. Llévelo a un punto de recogida designado por las autoridades locales una
vez que ha llegado al fin de su vida útil; algunos de ellos aceptan recogerlos de forma gratuita. Al reciclar el producto y su embalaje
de esta forma, contribuye a preservar el medio ambiente y a proteger la salud de los seres humanos.
D‐Link y el medio ambiente
En D‐Link, comprendemos y estamos comprometidos con la reducción del impacto que puedan tener nuestras actividades y nuestros productos
en el medio ambiente. Para reducir este impacto, D‐Link diseña y fabrica sus productos para que sean lo más ecológicos posible, utilizando
materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje.
D‐Link recomienda apagar o desenchufar los productos D‐Link cuando no se estén utilizando. Al hacerlo, contribuirá a ahorrar energía y a reducir
las emisiones de CO2.
Para obtener más información acerca de nuestros productos y embalajes ecológicos, visite el sitio www.dlinkgreen.com.
D‐Link DCH‐G022 User Manual
35
Appendix B ‐ Regulatory Statements
ITALIANO
IT
La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformità alle leggi e alle normative locali,
questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il
prodotto presso un punto di raccolta indicato dalle autorità locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti
da riciclare. Scegliendo di riciclare il prodotto e il relativo imballaggio, si contribuirà a preservare l'ambiente e a salvaguardare la
salute umana.
D‐Link e l'ambiente
D‐Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. Allo scopo di ridurre al minimo tale impatto,
D‐Link progetta e realizza i propri prodotti in modo che rispettino il più possibile l'ambiente, utilizzando materiali riciclabili a basso tasso di
tossicità sia per i prodotti che per gli imballaggi.
D‐Link raccomanda di spegnere sempre i prodotti D‐Link o di scollegarne la spina quando non vengono utilizzati. In questo modo si contribuirà
a risparmiare energia e a ridurre le emissioni di anidride carbonica.
Per ulteriori informazioni sui prodotti e sugli imballaggi D‐Link a ridotto impatto ambientale, visitate il sito all'indirizzo www.dlinkgreen.com.
NEDERLANDS
NL
Dit symbool op het product of de verpakking betekent dat dit product volgens de plaatselijke wetgeving niet mag worden weggegooid
met het huishoudelijk afval, maar voor recyclage moeten worden ingeleverd. Zodra het product het einde van de levensduur heeft
bereikt, dient u het naar een inzamelpunt te brengen dat hiertoe werd aangeduid door uw plaatselijke autoriteiten, sommige
autoriteiten accepteren producten zonder dat u hiervoor dient te betalen. Door het product en de verpakking op deze manier te
recyclen helpt u het milieu en de gezondheid van de mens te beschermen.
D‐Link en het milieu
Bij D‐Link spannen we ons in om de impact van onze handelingen en producten op het milieu te beperken. Om deze impact te beperken, ontwerpt
en bouwt D‐Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en
verpakking.
D‐Link raadt aan om steeds uw D‐Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart
u energie en beperkt u de CO2‐emissies.
Breng een bezoek aan www.dlinkgreen.com voor meer informatie over onze milieuverantwoorde producten en verpakkingen.
D‐Link DCH‐G022 User Manual
36
Appendix B ‐ Regulatory Statements
POLSKI
PL
Ten symbol umieszczony na produkcie lub opakowaniu oznacza, że zgodnie z miejscowym prawem i lokalnymi przepisami
niniejszego produktu nie wolno wyrzucać jak odpady czy śmieci z gospodarstwa domowego, lecz należy go poddać procesowi
recyklingu. Po zakończeniu użytkowania produktu, niektóre odpowiednie do tego celu podmioty przyjmą takie produkty
nieodpłatnie, dlatego prosimy dostarczyć go do punktu zbiórki wskazanego przez lokalne władze. Poprzez proces recyklingu i
dzięki takiemu postępowaniu z produktem oraz jego opakowaniem, pomogą Państwo chronić środowisko naturalne i dbać o
ludzkie zdrowie.
D‐Link i środowisko
D‐Link podchodzimy w sposób świadomy do ochrony otoczenia oraz jesteśmy zaangażowani w zmniejszanie wpływu naszych działań i produktów
na środowisko naturalne. W celu zminimalizowania takiego wpływu firma D‐Link konstruuje i wytwarza swoje produkty w taki sposób, aby były
one jak najbardziej przyjazne środowisku, stosując do tych celów materiały nadające się do powtórnego wykorzystania, charakteryzujące się
małą toksycznością zarówno w przypadku samych produktów jak i opakowań.
Firma D‐Link zaleca, aby Państwo zawsze prawidłowo wyłączali z użytku swoje produkty D‐Link, gdy nie są one wykorzystywane. Postępując w
ten sposób pozwalają Państwo oszczędzać energię i zmniejszać emisje CO2.
Aby dowiedzieć się więcej na temat produktów i opakowań mających wpływ na środowisko prosimy zapoznać się ze stroną Internetową www.
dlinkgreen.com.
ČESKY
CZ
Tento symbol na výrobku nebo jeho obalu znamená, že podle místně platných předpisů se výrobek nesmí vyhazovat do komunálního
odpadu, ale odeslat k recyklaci. Až výrobek doslouží, odneste jej prosím na sběrné místo určené místními úřady k tomuto účelu.
Některá sběrná místa přijímají výrobky zdarma. Recyklací výrobku i obalu pomáháte chránit životní prostředí i lidské zdraví.
D‐Link a životní prostředí
Ve společnosti D‐Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své
výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
Společnost D‐Link doporučuje, abyste své výrobky značky D‐Link vypnuli nebo vytáhli ze zásuvky vždy, když je nepoužíváte. Pomůžete tak šetřit
energii a snížit emise CO2.
Více informací o našich ekologických výrobcích a obalech najdete na adrese www.dlinkgreen.com.
D‐Link DCH‐G022 User Manual
37
Appendix B ‐ Regulatory Statements
MAGYAR
HU
Ez a szimbólum a terméken vagy a csomagoláson azt jelenti, hogy a helyi törvényeknek és szabályoknak megfelelően ez a termék
nem semmisíthető meg a háztartási hulladékkal együtt, hanem újrahasznosításra kell küldeni. Kérjük, hogy a termék élettartamának
elteltét követően vigye azt a helyi hatóság által kijelölt gyűjtőhelyre. A termékek egyes helyeken ingyen elhelyezhetők. A termék és
a csomagolás újrahasznosításával segíti védeni a környezetet és az emberek egészségét.
A D‐Link és a környezet
A D‐Linknél megértjük és elkötelezettek vagyunk a műveleteink és termékeink környezetre gyakorolt hatásainak csökkentésére. Az ezen hatás
csökkentése érdekében a D‐Link a lehető leginkább környezetbarát termékeket tervez és gyárt azáltal, hogy újrahasznosítható, alacsony károsanyag‐
tartalmú termékeket gyárt és csomagolásokat alkalmaz.
A D‐Link azt javasolja, hogy mindig kapcsolja ki vagy húzza ki a D‐Link termékeket a tápforrásból, ha nem használja azokat. Ezzel segít az energia
megtakarításában és a széndioxid kibocsátásának csökkentésében.
Környezetbarát termékeinkről és csomagolásainkról további információkat a www.dlinkgreen.com weboldalon tudhat meg.
NORSK
NO
Dette symbolet på produktet eller forpakningen betyr at dette produktet ifølge lokale lover og forskrifter ikke skal kastes sammen
med husholdningsavfall, men leveres inn til gjenvinning. Vennligst ta det til et innsamlingssted anvist av lokale myndigheter når
det er kommet til slutten av levetiden. Noen steder aksepteres produkter uten avgift. Ved på denne måten å gjenvinne produktet
og forpakningen hjelper du å verne miljøet og beskytte folks helse.
D‐Link og miljøet
Hos D‐Link forstår vi oss på og er forpliktet til å minske innvirkningen som vår drift og våre produkter kan ha på miljøet. For å minimalisere denne
innvirkningen designer og lager D‐Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav‐toksiske materialer både i
produktene og forpakningen.
D‐Link anbefaler at du alltid slår av eller frakobler D‐Link‐produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere
CO2‐utslipp.
For mer informasjon angående våre miljøansvarlige produkter og forpakninger kan du gå til www.dlinkgreen.com.
D‐Link DCH‐G022 User Manual
38
Appendix B ‐ Regulatory Statements
DANSK
DK
Dette symbol på produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke må bortskaffes som
husholdningsaffald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder,
når det er nået til slutningen af dets levetid. I nogle tilfælde vil produktet blive modtaget gratis. Ved at indlevere produktet og dets
emballage til genbrug på denne måde bidrager du til at beskytte miljøet og den menneskelige sundhed.
D‐Link og miljøet
Hos D‐Link forstår vi og bestræber os på at reducere enhver indvirkning, som vores aktiviteter og produkter kan have på miljøet. For at minimere
denne indvirkning designer og producerer D‐Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer
med lavt giftighedsniveau i både produkter og emballage.
D‐Link anbefaler, at du altid slukker eller frakobler dine D‐Link‐produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og
reducere CO2‐udledningerne.
Du kan finde flere oplysninger om vores miljømæssigt ansvarlige produkter og emballage på www.dlinkgreen.com.
SUOMI
FI
Tämä symboli tuotteen pakkauksessa tarkoittaa, että paikallisten lakien ja säännösten mukaisesti tätä tuotetta ei pidä hävittää
yleisen kotitalousjätteen seassa vaan se tulee toimittaa kierrätettäväksi. Kun tuote on elinkaarensa päässä, toimita se lähimpään
viranomaisten hyväksymään kierrätyspisteeseen. Kierrättämällä käytetyn tuotteen ja sen pakkauksen autat tukemaan sekä ympäristön
että ihmisten terveyttä ja hyvinvointia.
D‐Link ja ympäristö
D‐Link ymmärtää ympäristönsuojelun tärkeyden ja on sitoutunut vähentämään tuotteistaan ja niiden valmistuksesta ympäristölle mahdollisesti
aiheutuvia haittavaikutuksia. Nämä negatiiviset vaikutukset minimoidakseen D‐Link suunnittelee ja valmistaa tuotteensa mahdollisimman
ympäristöystävällisiksi käyttämällä kierrätettäviä, alhaisia pitoisuuksia haitallisia aineita sisältäviä materiaaleja sekä tuotteissaan että niiden
pakkauksissa.
Suosittelemme, että irrotat D‐Link‐tuotteesi virtalähteestä tai sammutat ne aina, kun ne eivät ole käytössä. Toimimalla näin autat säästämään
energiaa ja vähentämään hiilidioksiidipäästöjä.
Lue lisää ympäristöystävällisistä D‐Link‐tuotteista ja pakkauksistamme osoitteesta
D‐Link DCH‐G022 User Manual
www.dlinkgreen.com.
39
Appendix B ‐ Regulatory Statements
SVENSKA
SE
Den här symbolen på produkten eller förpackningen betyder att produkten enligt lokala lagar och föreskrifter inte skall kastas i
hushållssoporna utan i stället återvinnas. Ta den vid slutet av dess livslängd till en av din lokala myndighet utsedd uppsamlingsplats,
vissa accepterar produkter utan kostnad. Genom att på detta sätt återvinna produkten och förpackningen hjälper du till att bevara
miljön och skydda människors hälsa.
D‐Link och miljön
På D‐Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan
utformar och bygger D‐Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med
låg gifthalt i både produkter och förpackningar.
D‐Link rekommenderar att du alltid stänger av eller kopplar ur dina D‐Link produkter när du inte använder dem. Genom att göra detta hjälper
du till att spara energi och minska utsläpp av koldioxid.
För mer information om våra miljöansvariga produkter och förpackningar www.dlinkgreen.com.
PORTUGUÊS
PT
Este símbolo no produto ou embalagem significa que, de acordo com as leis e regulamentações locais, este produto não deverá ser
eliminado juntamente com o lixo doméstico mas enviado para a reciclagem. Transporte‐o para um ponto de recolha designado pelas
suas autoridades locais quando este tiver atingido o fim da sua vida útil, alguns destes pontos aceitam produtos gratuitamente. Ao
reciclar o produto e respectiva embalagem desta forma, ajuda a preservar o ambiente e protege a saúde humana.
A D‐Link e o ambiente
Na D‐Link compreendemos e comprometemo‐nos com a redução do impacto que as nossas operações e produtos possam ter no ambiente.
Para minimizar este impacto a D‐Link concebe e constrói os seus produtos para que estes sejam o mais inofensivos para o ambiente possível,
utilizando meteriais recicláveis e não tóxicos tanto nos produtos como nas embalagens.
A D‐Link recomenda que desligue os seus produtos D‐Link quando estes não se encontrarem em utilização. Com esta acção ajudará a poupar
energia e reduzir as emissões de CO2.
Para saber mais sobre os nossos produtos e embalagens responsáveis a nível ambiental visite www.dlinkgreen.com.
D‐Link DCH‐G022 User Manual
40
Caution
There is an explosion risk if an incorrect battery type is installed
in the device. Dispose of used batteries by following your local
regulations.
D‐Link DCH‐G022 User Manual
41

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2016:11:02 19:49:15+08:00
Create Date                     : 2016:11:02 19:49:15+08:00
Format                          : application/pdf
Title                           : Microsoft Word - DCH-G022_A1_Manual_v1.00_WW_-Update
Creator                         : nilin
Document ID                     : uuid:ea7cfe53-92a6-482c-acfe-1c10655c7fac
Instance ID                     : uuid:6146ecc2-e87b-4d51-99d7-34328b45eeb9
Page Count                      : 44
Author                          : nilin

EXIF Metadata provided by EXIF.tools