D Link DI824VUPB1 Wireless VPN Router User Manual 0115 di 824VUP pmd
D Link Corporation Wireless VPN Router 0115 di 824VUP pmd
D Link >
Contents
- 1. User Manual Part 1
- 2. User Manual Part 2
- 3. USer Manual Part 3
User Manual Part 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 718841 |
| Application ID | qA/wYSY2nB4LN4FXpmegkw== |
| Document Description | User Manual Part 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 261.06kB (3263189 bits) |
| Date Submitted | 2006-10-23 00:00:00 |
| Date Available | 2006-10-23 00:00:00 |
| Creation Date | 2004-02-13 16:28:40 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2006-09-26 11:21:57 |
| Document Title | 0115_di-824VUP+.pmd |
| Document Creator | PageMaker 7.0 |
| Document Author: | Administrator |
D-Link AirPlus G+ DI-824VUP High-Speed Enhanced 2.4 GHz Wireless VPN Router Manual Building Networks for People 1/19/2004 Contents Package Contents................................................................................. 3 Introduction............................................................................................4 Wireless Basics ....................................................................................6 Getting Started ...................................................................................... 9 Using the Configuration Menu.............................................................. 11 Installing the Print Server Software ......................................................68 Configuring on Windows 98se/Me Platforms .......................................70 Networking Basics ..............................................................................72 Reset to Factory Default Settings .......................................................101 Technical Specifications ....................................................................102 Frequently Asked Questions ..............................................................103 Contacting Technical Support ............................................................152 Warranty and Registration ..................................................................153 Package Contents Contents of Package: D-Link AirPlus G+ DI-824VUP High-Speed Enhanced 2.4GHz Wireless VPN Router Power Adapter - 5V DC / 2.5A Manual on CD Quick Installation Guide Note: Using a power supply with a different voltage rating than the one included with the DI-824VUP will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. System Requirements For Configuration: Ethernet-Based Cable or DSL Modem Computer with Windows, Macintosh, or Linux-based operating system with an installed Ethernet adapter Internet Explorer version 6.0 or Netscape Navigator version 6.0 and above, with JavaScript enabled Introduction The D-Link AirPlus G+ DI-824VUP Wireless Broadband Router is an enhanced 802.11b high-performance, wireless router with a printer port. It is an ideal way to extend the reach and number of computers connected to your wireless network. Unlike most 802.11g routers, the DI-824VUP is capable of data transfer speeds up to 54 Mbps (compared to the standard 11 Mbps) when used with other DLink AirPlus Xtreme G products such as the DWL-G650 and DWL-G520 Wireless Adapters. After completing the steps outlined in the Quick Installation Guide (included in your package) you will have the ability to share information and resources, as well as share a printer wirelessly on your network. The DI-824VUP is compatible with most popular operating systems, including Macintosh, Linux and Windows, and can be integrated into a large network. This Manual is designed to help you connect the Router and D-Link AirPlus 2.4GHz Wireless Adapters into a network in Infrastructure mode. Please take a look at the Getting Started section in this manual to see an example of an Infrastructure network using the DI-824VUP. Connections COM port is the connection to another COM port or backup dial-up modem. The LPT port or USB port is used to connect to your local printer. All ports (both LAN and WAN) auto-sense cable types to accomodate straight-through or cross-over cable. Pressing the Reset Button restores the router to its original factory default settings. LAN ports provide connections to Ethernetenabled devices. Features & Benefits WAN port is the connection for the Ethernet cable to the Cable or DSL modem. Receptor for the Power Adapter. Connects multiple computers to an Ethernet Broadband (Cable or DSL) modem to share the Internet connection Supports VPN pass-through, providing added security Advanced Firewall features for added network security DHCP server support enables all networked computers to automatically receive IP addresses Wireless connection of up to 54Mbps Web-based interface for Management Access Control to manage users on the network Maximum reliability, throughput and connectivity with automatic data rate switching Stronger network security with 256-bit encryption Printer port enables connection to a network printer WAN and LAN ports auto detect cable types (straight-through or cross-over) UPnP supported Note: Please refer to the Resetting the DI-824VUP to the Factory Defualt Settings section in this manual for instructions on how to use the Reset button. LEDS LED stands for Light-Emitting Diode. The DI-824VUP has the following LEDs as described below: LED LED Activity Power A steady light indicates a connection to a power source WAN A solid light indicates connection on the WAN port. This LED blinks during data transmission Status Flashes once per second to indicate the unit is working properly COM A steady light indicates a connection to COM port or back-up dial-up modem USB A steady light indicates a connection to a USB device LPT A steady light indicates a connection to a parallel printer port WLAN A blinking light indicates that the wireless segment is ready. This LED blinks during wireless data transmission. LOCAL NETWORK (Ports 1-4) A solid light indicates a connection to an Ethernet-enabled computer on ports 1-4. This LED blinks during data transmission. Wireless Basics D-Link AirPlus wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link AirPlus wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops, and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless Basics Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers, or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. People use wireless LAN technology for many different purposes: Mobility - Productivity increases when people have access to data in any location within the operating range of the WLAN. Management decisions based on real-time information can significantly improve worker efficiency. Low Implementation Costs - WLANs (Wireless Local Area Networks) are easy to set up, manage, change, and relocate. Networks that frequently change, both physically and logically, can benefit from WLANs ease of implementation. WLANs can operate in locations where installation of wiring may be impractical. Installation Speed and Simplicity - Installing a wireless LAN system can be fast, easy, and can eliminate the need to pull cable through walls and ceilings. Network Expansion - Wireless technology allows the network to go where wires cannot. Scalability - Wireless Local Area Networks (WLANs) can be configured in a variety of topologies to meet the needs of specific applications or existing infrastructure. Configurations are easily changed and range from peer-to-peer networks suitable for a small number of users to larger infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed. Wireless Basics The DI-824VUP is compatible with other D-Link AirPlus Xtreme G 802.11g products, which include: ♦ Enhanced 2.4GHz Wireless Cardbus Adapters used with laptop computers (DWL-G650) ♦ Enhanced 2.4GHz Wireless PCI cards used with desktop computers (DWL-G520) Standards-Based Technology Based on the IEEE 802.11g standard, the DI-824VUP is interoperable with existing compatible 2.4GHz wireless technology with data transfer speeds of up to 54Mbps (with the D-Link AirPlus family of wireless devices,) as well as standard 802.11b technology ( the D-Link Air family of wireless devices), with speeds of up to 11Mbps. Installation Considerations The D-Link AirPlus G+ DI-824VUP lets you access your network, using a wireless connection, from virtually anywhere. Keep in mind, however, that the number, thickness, and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines: 1. Keep the number of walls and ceilings between the DI-824VUP and your receiving device (e.g., the DWL-G650) to a minimum-each wall or ceiling can reduce your D-Link AirPlus wireless product’s range from 3-90 feet (1-30 meters.) Position your receiving devices so that the number of walls or ceilings is minimized. 2. Be aware of the direct line between routers and computers. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Try to make sure that devices are positioned so that the signal will travel straight through a wall or ceiling for better reception. 3. Building Materials make a difference - a solid metal door or aluminum studs may have a negative effect on range. Try to position wireless devices and computers with wireless adapters so that the signal passes through drywall or open doorways and not other materials. 4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. Getting Started With its default settings, the DI-824VUP will connect with other D-Link Air or AirPlus products, right out of the box. With a single IP Address from your Broadband Internet Service provider you can share the Internet with all the computers on your local network, without sacrificing speed or security, using D-Link Air networking products. IP ADDRESS Note: If you are using a DHCP-capable router in your network setup, such as the DI-824VUP, you will not need to assign a static IP Address. If you need to assign IP Addresses to the computers on the network, please remember that the IP Address for each computer must be in the same IP Address range as all the computers in the network, and the Subnet Mask must be exactly the same for all the computers in the network. For example: If the first computer is assigned an IP Address of 192.168.0.2 with a Subnet Mask of 255.255.255.0, then the second computer can be assigned an IP Address of 192.168.0.3 with a Subnet Mask of 255.255.255.0, etc. IMPORTANT: If computers or other devices are assigned the same IP Address, one or more of the devices may not function properly on the network. An Infrastructure wireless network contains an Access Point. The Infrastructure Network example, shown here, contains the following D-Link network devices: A wireless Broadband Router D-Link AirPlus G+ DI-824VUP A laptop computer with a wireless adapter D-Link AirPlus Xtreme G DWL-G650 A desktop computer with a wireless adapter D-Link AirPlus Xtreme G DWL-G520 A Cable modem D-Link DCM-201 Getting Started Please refer to the following sections of this manual for additional information about setting up a network: Networking Basics - learn how to check and assign your IP Address; share printers and files. Using the Configuration Menu - learn the settings for the DI-824VUP, using the web-based interface. Troubleshooting - learn how to check for common installation issues and other tips for troubleshooting. Please remember that D-Link AirPlus wireless devices are pre-configured to connect together, right out of the box, with their default settings. For a typical wireless setup at home (as shown above), please do the following: You will need broadband Internet access (a Cable or DSL subscription line into your home or office). Consult with your Cable or DSL provider for proper installation of the modem. Connect the Cable or DSL modem to the DI-824VUP wireless broadband router (See the Quick Installation Guide included with the DI-824VUP.) If you are connecting a desktop computer to your network, you can install the D-Link AirPlus Xtreme G DWL-G520 wireless PCI adapter into an available PCI slot. (See the Quick Installation Guide included with the DWL-G520.) If you are connecting a laptop computer to your network, install the drivers for the wireless cardbus adapter (e.g., D-Link AirPlus Xtreme G DWL-G650) into a laptop computer.(See the Quick Installation Guide included with the DWL-G650.) (See the Quick Installation Guide included with the DWL-650+.) Connect your printer to the printer port on the DI-824VUP. Please refer to the quick installation guide for loading the print server software. 10 Using the Configuration Menu Whenever you want to configure your network or the DI-824VUP, you can access the Configuration Menu by opening the web-browser and typing in the IP Address of the DI-824VUP. The DI-824VUP default IP Address is shown below: Open the web browser Type in the IP Address of the DI-824VUP http://192.168.0.1 Note: if you have changed the default IP Address assigned to the DI-824VUP, make sure to enter the correct IP Address. The factory default User name is admin and the default Password is blank (empty). It is recommended that you change the admin password for security purposes. Please refer to Tools > Admin to change the admin password. Home > Wizard The Home>Wizard screen will appear. Please refer to the Quick Installation Guide for more information regarding the Setup Wizard. Clicking Apply will save changes made to the page. Apply Clicking Cancel will clear changes made to the page. Cancel Clicking Help will bring up helpful information regarding the page. Help Clicking Restart will restart the router. (Necessary for some changes.) Restart 11 Using the Configuration Menu Home > Wireless SSID default is the default setting. All devices on the network must share the same SSID. If you change the default setting, the SSID may be up to 32 characters long. Channel WEP 6 is the default channel. All devices on the network must share the same channel. Click Enabled or Disabled (default). WEP Encryption Select the level of encryption desired: 64, 128, or 256-bit. 64-bit Requires 10 digits 128-bit Requires 26 digits 256-bit Requires 58 digits Keys 1-4 Input up to 4 WEP keys using Hexadecimal format; select the one you wish to use. Hexadecimal digits consist of the numbers 0-9 and the letters A-F. WEP (Wired Equivalent Privacy) If you enable encryption on the DI-824VUP, make sure to also enable encryption on all 802.11b wireless clients, or wireless connection will not be established. 12 Using the Configuration Menu Home > Wireless 13 802.1x The 802.1x is an authentication method which is designed to compliment the existing WEP encryption. During the authentication process, the server verifies the identity of the client attempting to connect to the network. With the proper client account and encryption key, access to the network is granted. Unfamiliar encryption key or clients are denied from accessing the wireless network. This feature will help safe guard a Local Area Network (LAN) from unwanted visitors. To take the full advantage of the 802.1x in DI-824VUP, all of the wireless devices on your network must be 802.1x compatible and must have the 802.11x feature enabled to communicate with the router. (Note: Windows 2000 users will find a few downloads to enable 802.1x clients on the Microsoft website.) Encryption Key Selection for Encryption Key 64 bits - This will generate a 10 digit Dynamic Key value for encryption. - 128 bits - This will generate a 26 digit Dynamic Key value for encryption. - 256bits - This will generate a 58 digit Dynamic Key value for encryption. - Lifetime - Select the period of time before a new Dynamic Key is generated. RADIUS Server Enter the IP address and port number of the RADIUS server that will be used as the 802.1x authenticator. Enter the secret key that has also been entered into the RADIUS server’s configuration. * Dynamic Keying is a technique for changing the WEP Key used between the supplicant (wireless client) and the access point. 14 Using the Configuration Menu Home > WAN Choose WAN Type WAN stands for Wide Area Network. In this case WAN represents the mode in which your ISP connects to the Internet. If you are uncertain, please ask your ISP which of the following represents your connection mode to the Internet: Dynamic IP Address Obtain an IP address from your ISP automatically (mainly for Cable users). Static IP Address Your ISP assigns you a Static IP Address. PPP over Ethernet Some ISPs require the use of PPPoE to connect to their services (mainly for DSL users). Dial-up Network Dial-up users can select this option to connect to their ISP through an analog dial-up modem if broadband connectivity is unavailable. Others PPTP For use in Europe only. Big Pond Cable For use in Australia only. 15 Using the Configuration Menu Home > WAN > Dynamic IP Address Most Cable modem users will select this option to obtain an IP Address automatically from their ISP (Internet Service Provider). Host Name This is optional, but may be required by some ISPs. The host name is the device name of the Router. Renew IP Forever Enable this feature to allow the router to automatically reconnect to the ISP if the connection drops. MAC Address The default MAC Address is set to the WAN’s physical interface MAC address on the Router. Clone MAC Address This feature will copy the MAC address of the Ethernet card, and replace the WAN MAC address of the Router with this Ethernet card MAC address. It is not recommended that you change the default MAC address unless required by your ISP. 16 Using the Configuration Menu Home > WAN > Static IP Address If you use a Static IP Address, you will input information here that your ISP has provided to you. WAN IP Address Input the IP Address provided by your ISP. WAN Subnet Mask Input the Subnet Mask provided by your ISP. WAN Gateway Input the Gateway address provided by your ISP. Primary DNS Input the primary DNS address provided by your ISP. Secondary DNS (Optional) Input the Secondary DNS address provided by your ISP. MTU Maximum Transmission Unit; default is 1500; you may need to change the MTU to conform to your ISP. Auto-backup Enabling this feature will connect your router to the Internet using a dial-up service if your broadband connection becomes unavailable. A subscription to a dial-up service is required for the auto-backup to work. 17 Using the Configuration Menu Home > WAN > PPPoE Most DSL users will select this option to obtain an IP address automatically from their ISP through the use of PPPoE. User Name Your PPPoE username provided by your ISP. Password Your PPPoE password provided by your ISP. Service Name (Optional) Check with your ISP for more information if they require the use of service name. IP Address (Optional) Enter in the IP Address if you are assigned a static PPPoE address. Primary DNS You will get the DNS IP automatically from your ISP but you may enter a specific DNS address that you want to use instead. Secondary DNS (Optional) Input the secondary DNS address. Maximum Idle Time Enter a maximum idle time during which Internet connection is maintained during inactivity. To disable this feature, enable Autoreconnect. MTU Maximum Transmission Unit; default is 1492; you may need to change the MTU to conform to your ISP. Auto-reconnect If enabled, the Broadband Router will automatically connect to your ISP after your system is restarted or if the connection is dropped. Auto-backup Enabling this feature will connect your router to the Internet using a dial-up service if your broadband connection becomes unavailable. A subscription to a dial-up service is required for the auto-backup to work. 18 Using the Configuration Menu Home > WAN > Dial-up Network Most Dial-up users will select this option to connect to their ISP through an analog dial-up modem. This feature can be used as a back-up when your broadband connectivity is unavailable. Dial-up Telephone Telephone number to connect to your ISP Dial-up Account Username provided by your ISP Dial-up Password Password provided by your ISP Primary DNS/ Seconday DNS If the settings are configured as “0.0.0.0,” they will be automatically assigned upon connection. Assigned IP Address (Optional) Enter in the IP Address if you are assigned a static PPPoE address. Extra Settings This setting is used to optimize the communication quality between the ISP and your analog dial-up modem. (Initialization string) - optional. Maximum Idle Time Enter a maximum idle time during which Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. Baud Rate The communication speed between the DI-824VUP and your modem. Auto-reconnect If enabled, the Broadband Router will automatically connect to your ISP after your system is restarted or if the connection is dropped. 19 Using the Configuration Menu Home > WAN > Others > PPTP Point-to-Point Tunneling Protocol (PPTP) is a WAN connection used in Europe. My IP Address Enter the IP Address. My Subnet Mask Enter the Subnet Mask. Server IP Address Enter the Server IP Address. PPTP Account Enter the PPTP account name. PPTP Password Enter the PPTP password. Connection ID (Optional) Enter the connection ID if required by your ISP. Maximum Idle Time Enter a maximum idle time during which Internet connection is maintained during inactivity. To disable this feature, enable Autoreconnect. Auto-reconnect If enabled, the Broadband Router will automatically connect to your ISP after your system is restarted or if the connection is dropped. Auto-backup Enabling this feature will connect your router to the Internet using a dial-up service if your broadband connection becomes unavailable. A subscription to a dial-up service is required for the auto-backup to work. 20 Using the Configuration Menu Home > WAN > Others > L2TP Layer 2 Tunneling Protocol(L2TP) is a WAN connenction used in Israel. IP Address IP address provided by your ISP. Subnet Mask Subnet mask provided by your ISP. Server IP IP Address of LNS provided by your ISP. L2TP Account Your L2TP username provided by your ISP. L2TP password Your L2TP password provided by your ISP. Retype Password Re-enter L2TP password. Maximum Idle Time Set it to zero or enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will automatically connect to the ISP after the router is restarted or connection is dropped. Auto-Reconnect If enabled, the Broadband Router will automatically connect to your ISP after your system is restarted or if the connection is dropped. 21 Using the Configuration Menu Home > WAN > Others > BigPond Cable Dynamic IP Address for BigPond is a WAN connection used in Australia. User Name Enter in the user name for the BigPond account. Password Enter the password for the BigPond account. Login Server IP (Optional) Enter the Login Server IP if required. Auto-reconnect If enabled, the Broadband Router will automatically connect to your ISP after your system is restarted or if the connection is dropped. Auto-backup Enabling this feature will connect your router to the Internet using a dial-up service if your broadband connection becomes unavailable. A subscription to a dial-up service is required for the auto-backup to work. 22 Using the Configuration Menu Home > LAN LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DI-824VUP. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet. IP Address The IP address of the LAN interface. The default IP address is: 192.168.0.1. Subnet Mask The subnet mask of the LAN interface. The default subnet mask is 255.255.255.0. Domain Name (Optional) The name of your local domain. 23 Using the Configuration Menu Home > DHCP DHCP stands for Dynamic Host Control Protocol. The DI-824VUP has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DI-824VUP. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool. DHCP Server Enable or disable the DHCP service. Starting IP Address The starting IP address for the DHCP server’s IP assignment. Ending IP Address The ending IP address for the DHCP server’s IP assignment. Lease Time The length of time for the DHCP lease. Static DHCP Used to allow the DHCP server to assign the same IP adress to a specific MAC address. Enter the name, IP address, and MAC address into the fields. Select which DHCP client to clone. DHCP Clients List Lists the DHCP clients connected to the DI-824VUP. Click Refresh to update the list. The table will show the Host Name, IP Address, and MAC Address of the DHCP client computer. 24 Using the Configuration Menu Home > VPN Settings VPN Settings are settings that are used to create virtual private tunnels to remote VPN gateways. The tunnel technology supports data confidentiality, data origin, authentication, and data integrity of network information by utilizing encapsulation protocols, encryption algorithms, and hashing algorithms. VPN Click Enable to enable VPN tunnels. When you are not using the VPN feature, it is best to keep VPN disabled. NetBIOS broadcast Enable this to allow NetBIOS braodcast over the VPN tunnels. Max. number of tunnels Select the maximum number of allowable tunnels. Tunnel Name Create a name for the tunnel. Method IPSec VPN supports two kinds of key-obtained methods: manual key and automatic key exchange. Manual key approach indicates that the two endpoint VPN gateways require setting up authentication and encryption key by the Administrator manually. However, IKE approach will perform automatic Internet key exchange. Admins of both endpoint gateways will only need to set the same pre-shared key. More For more in depth configuration to adjust manual key or IKE method settings, click More. 25 Using the Configuration Menu Home > VPN Settings > Tunnel > Method >IKE Tunnel Name Current tunnel name. Aggressive Mode Enabling this mode will accelerate establishing tunnel, but the device will have less security. Local Subnet The subnet of the VPN gateway’s local network. It can be a host, a partial subnet or a whole subnet. Local Netmask Local netmask combined with local subnet to form a subnet domain. Remote Subnet The subnet of the remote VPN gateway’s local network. It can be a host, a partial subnet, or a whole subnet. Remote Netmask The subnet of the remote VPN gateway’s local network. It can be a host, a partial subnet, or a whole subnet. Remote Gateway The WAN IP address of remote VPN gateway. Preshared Key The first key that supports IKE mechanism of both VPN gateways for negotiating further security keys. The preshared key must be the same for both endpoint gateways. IKE Proposal index Click the button to setup a set of frequent-used IKE proposals and select from the set of IKE proposals for the tunnel. IPSec Proposal index Click the button to setup a set of frequent-used IPSec proposals and select from the set of IKE proposals for the tunnel. 26 Using the Configuration Menu Home > VPN Settings > Tunnel > Method > IKE > Select IKE Proposal IKE Proposal index A list of selected proposal indexes from the IKE proposal pool listed below. Proposal Name This is the name used to classify the IKE proposal. DH Group There are three groups that can be selected: group 1 (MODP768), group 2 (MODP1024), and group 5 (MODP1536). Encrypt algorithm There are two algorithms that can be selected: 3DES and DES. Auth algorithm There are two algorithms that can be selected: SHA1 and MD5. 27 Using the Configuration Menu Home > VPN Settings > Tunnel > Method > IKE > Select IKE Proposal Continued... Life Time Enter in the life time value. Life Time Unit There are two units that can be selected: second and KB. Proposal ID The identifier of IKE proposal can be chosen for adding the corresponding proposal to the dedicated tunnel. Add to Click it to add the chosen proposal indicated by proposal ID to IKE Proposal index list. 28 Using the Configuration Menu Home > VPN Settings > Tunnel > Method > IKE > Select IPSEC Proposal IPSec Proposal index A list of selected proposal indexes from the IPSec proposal pool listed below. Proposal Name This is the name used to classify the IPSec Proposal DH Group There are three groups that can be selected: group 1 (MODP768), group 2 (MODP1024), and group 5 (MODP1536). Encap protocol There are two protocols that can be selected: ESP and AH. Encrypt algorithm There are two algorithms that can be selected: 3DES and DES. Auth algorithm There are two algorithms that can be selected: SHA1 and MD5. 29 Using the Configuration Menu Home > VPN Settings > Tunnel > Method > IKE > Select IPSEC Proposal Continued... Life Time Enter in a life time value. Life Time Unit There are two units that can be selected: second and KB. Proposal ID The identifier of IPSec proposal can be chosen for adding the corresponding proposal to the dedicated tunnel. Add to Click it to add the chosen proposal indicated by proposal ID to IPSec Proposal index list. 30 Using the Configuration Menu Home > VPN Settings > Tunnel > Manual Tunnel Name Current tunnel name. Aggressive Mode Enabling this mode will accelerate establishing tunnel, but the device will have less security. Local Subnet The subnet of the VPN gateway’s local network. It can be a host, a partial subnet, or a whole subnet. Local Netmask Local netmask combined with local subnet to form a subnet domain. Remote Subnet The subnet of the remote VPN gateway’s local network. It can be a host, a partial subnet, or a whole subnet. Remote Netmask The subnet of the remote VPN gateway’s local network. It can be a host, a partial subnet, or a whole subnet. Remote Gateway The WAN IP address of remote VPN gateway. Method The set of rules applied when connecting to the VPN gateway. Local SPI The value of the local SPI should be set in hex format. Remote SPI The value of the remote SPI should be set in hex format. 31 Using the Configuration Menu Home > VPN Settings > Tunnel > Manual Continued... Encapsulation Protocol There are two protocols that can be selected: ESP and AH. Encryption Algorithm There are two algorithms that can be selected: 3DES and DES. Encryption Key For DES, the encryption key is 8 bytes (16 Char.). For 3DES, the encryption key is 24 bytes (48 Char.). Authentication Algorithm There are two algorithms that can be selected: SHA1 and MD5. Authentication Key For MD5, the authentication algorithm is16 bytes (32 Char.). For SHA1, the authentication algorithm is 20 bytes.(40 Char.). Life Time Enter in the life time value. Life Time Unit There are two units that can be selected: Second and KB. 32 Using the Configuration Menu Home > VPN Settings > Dynamic VPN Tunnel VPN Settings - IKE There are three parts that are necessary to setup the configuration of IKE for the dedicated tunnel: basic setup, IKE proposal setup, and IPSec proposal setup. Basic setup includes the setting of following items: local subnet, local netmask, remote subnet, remote netmask, remote gateway, and pre-shared key. The tunnel name is derived from the previous page of VPN setting. IKE proposal setup includes the setting of a set of frequent-used IKE proposals and selecting from the set of IKE proposals. Tunnel Name Current tunnel name. Dynamic VPN This feature works with a VPN software client so the DI824VUP does not need to know the IP address of the remote clients. Aggressive Mode Enabling this mode will accelerate establishing the tunnel, but the device will have less security. Local Subnet The subnet of the VPN gateway’s local network. It can be a host, a partial subnet, or a whole subnet. Local Netmask The netmask of the VPN gateway’s local network. 33 Using the Configuration Menu Home > VPN Settings > Dynamic VPN Tunnel Continued... Preshared Key The first key that supports IKE mechanism of both VPN gateways for negotiating further security keys. The preshared key must be the same for both endpoint gateways. IKE Proposal index Click the button to setup a set of frequent-used IKE proposals and select from the set of IKE proposals for the dedicated tunnel. IPSec Proposal index Click the button to setup a set of frequent-used IPSec proposals and select from the set of IKE proposals for the dedicated tunnel. 34 Using the Configuration Menu Home > VPN Settings > Dynamic VPN Tunnel > Set IKE Proposal IKE Proposal index A list of selected proposal indexes from the IKE proposal pool listed below. Proposal Name It indicates which IKE proposal to be focused. DH Group There are three groups that can be selected: group 1 (MODP768), group 2 (MODP1024), and group 5 (MODP1536). Encrypt algorithm There are two algorithms that can be selected: 3DES and DES. Auth algorithm There are two algorithms that can be selected: SHA1 and MD5. 35 Using the Configuration Menu Home > VPN Settings > Dynamic VPN Tunnel > Set IKE Proposal Continued... Life Time Enter in the life time value. Life Time Unit There are two units that can be selected: second and KB. Proposal ID The identifier of IKE proposal can be chosen for adding the corresponding proposal to the dedicated tunnel. Add to Click it to add the chosen proposal indicated by proposal ID to IKE Proposal index list. 36 Using the Configuration Menu Home > VPN Settings > Dynamic VPN Tunnel > Set IPSEC Proposal IPSec Proposal index A list of selected proposal indexes from the IPSec proposal pool listed below. Proposal Name This is the name used to classify the IPSec proposal. DH Group There are three groups that can be selected: group 1 (MODP768), group 2 (MODP1024), and group 5 (MODP1536). Encap protocol There are two protocols that can be selected: ESP and AH. Encrypt algorithm There are two algorithms that can be selected: 3DES and DES. Auth algorithm There are two algorithms that can be selected: SHA1 and MD5. 37 Using the Configuration Menu Home > VPN Settings > Dynamic VPN Tunnel > Set IPSEC Proposal Continued... Life Time Enter in a life time value. Life Time Unit There are two units that can be selected: second and KB. Proposal ID The identifier of IPSec proposal can be chosen for adding the corresponding proposal to the dedicated tunnel. Add to Click it to add the chosen proposal indicated by proposal ID to IPSec Proposal index list. 38 Using the Configuration Menu Home > VPN Settings > L2TP Server Setting Enable L2TP Server Click to enable the L2TP Server function. Virtual IP of L2TP Server Enter your Virtual IP address to access the L2PT server. Authentication Protocol Select one of the following authentication protocols: PAP, CHAP, or MSCHAP. Tunnel Name Current tunnel name. User Name Enter in the username for the L2TP account. Password Enter in the password for the L2TP account. 39 Using the Configuration Menu Home > VPN Settings > PPTP Server Setting Enable PPTP Server Click to enable the PPTP Server function. Virtual IP of PPTP Server Enter your Virtual IP address to access thePPPT server. Authentication Protocol Select one of the following authentication protocols: PAP, CHAP, or MSCHAP. Tunnel Name Current tunnel name. User Name Enter in the username for the PPTP account. Password Enter in the password for the PPTP account. 40 Using the Configuration Menu Advanced > Virtual Server The DI-824VUP can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DI-824VUP firewall feature filters out unrecognized packets to protect your LAN network so all computers networked with the DI-824VUP are invisible to the outside world. If you wish, you can make some of the LAN computers accessible from the Internet by enabling Virtual Server. Depending on the requested service, the DI-824VUP redirects the external service request to the appropriate server within the LAN network. Name The name referencing the virtual service. Private IP The server computer in the LAN network that will be providing the virtual services. Protocol Type The protocol used for the virtual service. Private Port The port number of the service used by the Private IP computer. Public Port The port number on the WAN side that will be used to access the virtual service. Schedule Select Always, or choose From and enter the time period during which the virtual service will be available. 41 Using the Configuration Menu Advanced > Application Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony, and others. These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DI-824VUP. If you need to run applications that require multiple connections, specify the port normally associated with an application in the Trigger field, then enter the public ports associated with the trigger port into the Incoming Ports field. At the bottom of the screen, there are already defined special applications. To use them, select one from the drop down list and select an ID number you want to use. Then click the “Copy to” button and the router will fill in the appropriate information to the list. You will then need to enable the service. If the mechanism of Special Applications fails to make an application work, try using DMZ host instead. Note! Only one PC can use each Special Application tunnel. Enabled Select to activate the policy. Trigger Port This is the port used to trigger the application. It can be either a single port or a range of ports. Public Ports This is the port number on the WAN side that will be used to access the application. You may define a single port or a range of ports. You can use a comma to add multiple ports or port ranges. 42 Using the Configuration Menu Advanced > Filter > IP Filter Use IP (Internet Protocol) filters to allow or deny computers access to the Internet based on their IP address. IP Filter Use IP Filters to deny LAN IP addresses access to the internet. Enabled or Disabled Click Enabled to apply the filter policy or click Disabled to enter an inactive filter policy. (You can reactivate the policy later.) IP Address Enter in the IP address range of the computers that you want the policy to apply to. If it is only a single computer that you want the policy applied to, then enter the IP address of that computer in the Start Source IP and leave the End Source IP blank. Port Range Enter in the port range of the TCP/UDP ports that you want the policy to apply to. If it is only a single port that you want the policy applied to, then enter the port number in the Start Port field and leave the End Port field blank. If you want to use all the ports, you can leave the port range empty. Protocol Select the protocol type to allow or deny certain types of IP addresses. Schedule Select Always, or choose From and enter the time period during which the IP filter policy will be in effect. 43 Using the Configuration Menu Advanced > Filter > MAC Filters MAC (Media Access Control) Filters are used to allow or deny LAN (Local Area Network) computers from accessing the Internet and network by their MAC address. At the bottom of the screen, there is a list of MAC addresses from the DHCP client computers connected to the DI-824VUP. To use them, select one from the drop down list. Then click the “Apply” button and the DI-824VUP will fill in the appropriate information to the list. Disabled MAC Filter Select this option if you do not want to use MAC filters. Only allow computers with MAC address listed below to access the network Select this option to only allow computers that are in the list to access the network and Internet. All other computers will be denied access to the network and Internet. Only deny computers with MAC address listed below to access the network Select this option to only deny computers that are in the list to access the network and Internet. All other computers will be allowed access to the network and Internet. MAC Address Enter the MAC Address of the client that will be filtered. 44 Using the Configuration Menu Advanced > Filter > URL Blocking Use URL Blocking to deny LAN computers from accessing specific web sites by its URL. A URL is a specially formatted text string that defines a location on the Internet. If any part of the URL contains the blocked word, the site will not be accessible and the web page will not display. Disabled URL Blocking Select this option if you do not want to use URL Blocking. 45 Using the Configuration Menu Advanced > Filter > Domain Blocking Use Domain Blocking to allow or deny computers access to specific Internet domains whether it is through www, ftp, snmp, etc. Disabled Domain Blocking Select this option if you do not want to use Domain Blocking. Allow users to access all domains except “Blocked Domains” Select this option to allow users to access the specified Internet domains listed below. Users will be denied access to all other Internet domains. Deny users to access all domains except “Permitted Domains” Select this option to deny users to access the specified Internet domains listed below. Users will be allowed access to all other Internet domains. 46 Using the Configuration Menu Advanced > Firewall Firewall Rules is an advance feature used to allow or deny traffic from passing through the device. It works in the same way as IP Filters with additional settings. You can create more detailed rules for the device. Enabled or Disabled Click Enabled to apply the filter policy or click Disabled to enter an inactive filter policy (You can reactivate the policy later). Name Enter the name of the Firewall Rule. Action Select Allow or Deny to allow or deny traffic to pass through the DI-824VUP. Source Choose between a LAN or WAN source. An asterisk signifies the selection of both sources. IP Start The starting IP address for the filter policy. Leaving the field blank selects all IPs. IP End The ending IP address for the filter policy. Leaving the field blank sleects all IPs. Destination Choose between a LAN or WAN destination. An asterisk signifies the selection of both destinations. 47 Using the Configuration Menu Advanced > Firewall Continued IP Address Enter in the IP address range of the computers that you want the policy to apply to. If it is only a single computer that you want the policy applied to, then enter the IP address of that computer in the Start Source IP and leave the End Source IP blank. Protocol Select one of the following protocols: TCP, UDP, or ICMP. Port Range Enter in the port range of the TCP/UDP ports that you want the policy to apply to. If it is only a single port that you want the policy applied to, then enter the port number in the Start Port field and leave the End Port field blank. If you want to use all the ports, you can leave the port range empty. Schedule Select Always, or choose From and enter the time period during which the virtual service will be available. 48 Using the Configuration Menu Advanced > SNMP SNMP (Simple Network Management Protocol) is a widely used network monitoring and control protocol that reports activity on each network device to the administrator of the network. SNMP can be used to monitor traffic and statistics of the DI-824VUP. The DI824VUP supports SNMP v1 or v2c. Enable SNMP (Simple Network Management Protocol.) Local LAN (Local Area Network). Remote WAN (Wide Area Network). Get Community Enter the password public in this field to allow “Read only” access to network administration using SNMP. You can view the network, but no configuration is possible wth this setting. Set Community Enter the password private in this field to gain “Read and Write” access to the network using SNMP software. The administrator can configure the network with this setting. SNMP v1 Simple Network Management Protocol (SNMP) is an application layer protocol that facilitates the exchange of management information between nework devices. SNMP v2 Enhanced version of SNMP v1 with additional protocol operations such as UDP, IP, CLNS, DDP, and IPX. 49 Using the Configuration Menu Advanced > DDNS DDNS (Dynamic Domain Name System) keeps dynamic IP addresses (e.g., IP addresses assigned by a DHCP capable router or server) linked to a domain name. Users who have a Dynamic DNS account may use this feature on the DI-824VUP. DDNS When an IP address is automatically assigned by a DHCP server, DDNS automatically updates the DNS server. Select Disabled or Enabled. Provider Select from the pull-down menu. Host Name Enter the Host name. Username/Email Enter the username or email address. Password/Key Enter the password or key. 50 Using the Configuration Menu Advanced > Routing Static routes can be added if you require specific routes within your internal network. These routes will not apply to the WAN (Internet) network. Dynamic Routing Dynamic Routing Settings allow the VPN Router to route IP packets to another network automatically. The RIP protocol is applied, and broadcasts the routing information to other routers on the network regularly. By default, it is set to disable. Check to enable (RIPv1 / RIPv2) protocol. RIP v1 Protocol in which the IP address is routed through the internet. RIP v2 Enhanced version of RIP v1with added features such as Authentication, Routing Domain, Next Hop Fowarding, and Subnetmask Exchange. Destination Enter in the IP of the specified network that you want to access using the static route. Subnet Mask Enter in the subnet mask to be used for the specified net work. Gateway Enter in the gateway IP address to the specified network. Hop Enter in the amount of hops it will take to the specified network. Enable Select this option for the specified static route to take effect. Hop Count - In a transmission path, each link is terminated at a network device such as a router or gateway. The number of hops equals the number of routers or gateways that data must pass through before reaching the destination. 51 Using the Configuration Menu Advanced > DMZ If you have a computer that cannot run Internet applications properly from behind the DI824VUP, then you can allow that computer to have unrestricted Internet access. Enter the IP address of that computer as a DMZ (Demilitarized Zone) host with unrestricted Internet access. Adding a client to the DMZ may expose that computer to a variety of security risks; so only use this option as a last resort. 52 Using the Configuration Menu Advanced > Performance Beacon Interval Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended. DTIM interval (Delivery Traffic Indication Message) 3 is the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. TX Rates Select the data rate. Default is 1-2-5.5-11-22-54Mbps. Wireless Mode Select either mix mode or G mode. Mixed Mode The DI-824VUP will use either B or G mode depending on which mode has a stronger frequency. G Mode The DI-824VUP will only use G mode. 53 Using the Configuration Menu Advanced > Performance (Continued) Authentication Open System Shared Key Both Select Open system, Shared Key or Both. The DI-824VUP will be visible to all devices on the network. This is the default setting. In this mode, in order to access the DI-824VUP on the network, the device must be listed in the MAC Address Control List. In this mode, all devices on the network can access the DI-824VUP. SSID Broadcast Enable is the default setting. Choose Enable to broadcast the SSID across the network. All devices on a network must share the same SSID (Service Set Identifier) to establish communication. Choose Disable if you do not wish to broadcast the SSID over the network. 8x Enable 8X Mode on the wireless client and the DI-824VUP to increase data transmission speed. 8X Mode will only work with wireless devices that also support 8X Mode. 54 Using the Configuration Menu Tools > Admin You can change the administrator and user passwords here. It is recommended that you change the administrator password from the default setting.The default password is blank (nothing). Password To change the administrator or user password, enter in the old password and enter the new password twice to confirm. Remote Management Remote Management allows the device to be configured through the WAN (Wide Area Network) port from the Internet using a web browser. A username and password is still required to access the browser-based management interface. IP Address Internet IP Address of the computer that has access to the DI824VUP. If the IP Address is set to 0.0.0.0, this allows all Internet IP addresses to access the DI-824VUP. Port The port number used to access the DI-824VUP. Example:http://x.x.x.x:8080, where x.x.x.x. is the WAN IP address of the DI-824VUP and 8080 is the port used for the Web Management interface. 55 Using the Configuration Menu Tools > Time You will need to set the time zone corresponding to your location. The time can be set manually or the device can connect to a NTP (Network Time Protocol) server to retrieve the time. Enable NTP (Network Time Protocol). Select to synchronize the time on the DI-824VUP to an NTP server. Set Device Date and Time You can manually set the time on your network here. NTP is short for Network Time Protocol, an Internet standard protocol that assures accurate synchronization to the millisecond of computer clock times in a network of computers. 56 Using the Configuration Menu Tools > System The current system settings can be saved as a file onto the local hard drive. The saved file or any other saved setting file created by the DI-824VUP can be uploaded into the unit. To reload a system settings file, click on “Browse” to search the local hard drive for the file to be used. The device can also be reset back to factory default settings by clicking on “Reset to Default” button. Use the restore feature only if necessary. This will erase previously saved settings for the unit. Make sure to save your system settings before doing a factory restore. Save Settings to Local Hard Drive Click Save to save the current settings to the local Hard Drive. Load Settings from Local Hard Drive Click Browse to find the settings file, then click Load. Restore to Factory Default Settings Click Restore to restore the factory default settings. 57 Using the Configuration Menu Tools > Firmware You can upgrade the firmware of the device using this tool. Make sure that the firmware you want to use is saved on the local hard drive of the computer. Click on “Browse” to search the local hard drive for the firmware to be used for the update. Upgrading the firmware will not change any of your system settings but it is recommended that you save your system settings before doing a firmware upgrade. Please check the D-Link support site for firmware updates at http://support.dlink.com. Browse After you have downloaded the new firmware, click Browse in this window to locate the firmware update on your hard drive. Click Apply to complete the firmware upgrade. Note! Do not power off the unit when it is being upgraded. When the upgrade is complete, the unit will be restarted automatically. 58 Using the Configuration Menu Tools > Misc Ping Test In the open box, enter in a URL (i.e., www.dlink.com) or an IP address and click on Ping to test your internet connection. Restart Device Click Reboot to restart the unit. Block WAN Ping Click Enable to block the WAN ping. Computers on the Internet will not get a reply back from the DI-824VUP when it is being “ping”ed. This may help to increase security. SPI Mode When this feature is enabled, the router will record the packet information passed through the router such as IP address, port address, ACK, SEQ number, and so on. The router will also check every incoming packet to detect if it is valid. DoS When DoS is enabled, the router will prevent Denial of Service attacks on all computers connected to the DI-824VUP. 59 Using the Configuration Menu Tools > Misc (Continued) UPnP UPnP is short for Universal Plug and Play which is a networking architecture that provides compatibility among networking equipment, software, and peripherals. The DI-824VUP is a UPnP enabled router and will only work with other UPnP devices/softwares. If you do not want to use the UPnP Functionality, it can be disabled by selecting “Disabled”. VPN PassThrough The device supports VPN (Virtual Private Network) pass-through for both PPTP (Point-to-Point Tunneling Protocol) and IPSec (IP Security). Once VPN pass-through is enabled, there is no need to open up virtual services. Multiple VPN connections can be made through the device. This is useful when you have many VPN clients on the LAN. Non-standard FTP port If an FTP server you want to access is not using the standard port 21, then enter in the port number that the FTP server is using instead. 60 Using the Configuration Menu Status > Device Info This screen displays information about the DI-824VUP such as WAN, LAN, and Wireless status. DHCP Renew Use this button to reconnect to your ISP, if your WAN connection is set up for DHCP. DHCP Release Use this button to disconnect from your ISP, if your WAN connection is set up for DHCP. 61 Using the Configuration Menu Status > Log This screen displays activities occurring on the DI-824VUP. First Page Click First Page to go to the first page of the log. Last Page Click Last Page to go to the last page of the log. Previous Click Previous to go to the previous page of the log. Next Click Next to go to the next page of the log. Clear Click Clear to clear the current page of the log. Log Settings Click for advanced features (see next page). 62 Using the Configuration Menu Status > Log > Log Settings E-Mail Alert The DI-824VUP can be set up to send the log files to a specific email address. SMTP Server IP Enter in the IP address of the mail server. Email Address Enter in the email address of the recipient who will receive the email log. Send Mail Now Click to send mail immediately. IP Address of the Syslog Server Enter in the IP address of a syslog server within the network. Click Enable to activate the policy. The DI-824VUP will send all of it’s logs to the specified syslog server. Log Type Select the types of activity to log. By default, all values are selected. 63 Using the Configuration Menu Status > Stats In the Stats section, traffic statistics are displayed. Refresh This will update the page. Reset This will reset the packet counter to zero. WAN Displays Received / Transmitted packets from the WAN port. LAN Displays Received / Transmitted packets from the LAN port. 64 Using the Configuration Menu Status > Wireless This screen displays the connection time and the MAC Address of the connected wireless clients. Click on Refresh for the most recent information. 65 Using the Configuration Menu Status > Wireless This screen displays the VPN connection state. Click on Refresh for the most recent information. 66 Using the Configuration Menu Help This screen displays the complete Help menu. For help at anytime, click the Help tab in the Configuration menu. 67 Installing the Print Server Software Insert the installation CD-ROM into the CD-ROM drive. The following window will be shown automatically. If it is not, please run “autorun.exe” on the CD-ROM. Click Install Print Server Software Select your Windows operating system 68 Installing the Print Server Software (continued) Wait until the following Welcome dialog appears. Click Next Select the destination folder. Click Next Then, the setup program will begin to install the programs into the destination folder. When the following window is displayed. Click Finish After rebooting your computer, the software installation procedure is finished. Click OK 69 Configuring on Windows 98se/Me Platforms After you finish the software installation procedure, your computer will be capable of network printing provided by the DI824VUP. For convenience, we call the printer connected to the printer port of the DI-824VUP a printer server. On a Windows 95/98 platform, open the Printers window in the My Computer menu. Now, you can configure the print server of the DI-824VUP: Find out the corresponding icon of your printer server, for example, the HP LaserJet 6L. Right click on that icon, and then select Properties. The following screen appears: Click on the Details tab Choose the “PRTmate: (All-in-1)” from the list attached at the Print To item. Be sure that the Printer Driver item is configured to the correct driver of your printer server. Click Port Settings Choose your printer interface. Type in the IP address of the DI-824VUP. Click OK 70 Configuring on Windows 2000/XP Platforms Click Port The configuration procedure for a Windows 2000/XP platform is similar to that of Windows 95/98 except the screen of printer Properties. Click Configure Port Choose your printer interface. Type in the IP address of the DI-824VUP. Click OK (Note: Screen shots are taken in Windows 2000, similar screens will appear in Windows XP.) 71 Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about networking computers using Windows 2000, ME or 98. Go to Start > Control Panel > Network Connections Select Set up a home or small office network When this screen appears, Click Next. 72 Networking Basics Please follow all the instructions in this window: Click Next. In the following window, select the best description of your computer. If your computer connects to the internet through a gateway/router, select the second option as shown. Click Next. 73 Networking Basics Enter a Computer description and a Computer name (optional). Click Next. Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next. 74 Networking Basics Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes. 75
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Create Date : 2004:02:13 16:28:40+08:00 Modify Date : 2006:09:26 11:21:57+08:00 About : uuid:66195173-6e4c-457a-beac-c89c4195a084 Producer : Acrobat Distiller 6.0 (Windows) Creation Date : 2004:02:13 16:28:40+08:00 Mod Date : 2006:09:26 11:21:57+08:00 Author : Administrator Creator Tool : PageMaker 7.0 Metadata Date : 2006:09:26 11:21:57+08:00 Document ID : uuid:5dc2eb55-9c52-49f4-b411-b83d151c0ab8 Instance ID : uuid:62b1ad4b-5856-4d39-8af3-564378edbd37 Format : application/pdf Title : 0115_di-824VUP+.pmd Creator : Administrator Page Count : 75 Has XFA : NoEXIF Metadata provided by EXIF.tools