D Link DSM510A1 High Definition Media Player User Manual Manual 1

D Link Corporation High Definition Media Player Manual 1

Contents

Manual 1

Download: D Link DSM510A1 High Definition Media Player User Manual Manual 1
Mirror Download [FCC.gov]D Link DSM510A1 High Definition Media Player User Manual Manual 1
Document ID755665
Application IDpsdoH5bQh+xqK0YDl7E6uw==
Document DescriptionManual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize213.54kB (2669188 bits)
Date Submitted2007-02-06 00:00:00
Date Available2007-02-06 00:00:00
Creation Date2007-02-06 10:41:06
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2007-02-06 10:53:39
Document TitleManual 1
Document CreatorAdobe InDesign CS2 (4.0.2)

Table of Contents
Table of Contents
Safety Information........................................................ 4
Product Overview......................................................... 8
Package Contents.................................................... 8
Minimum System Requirements............................... 8
Recommended......................................................... 8
Introduction............................................................... 9
Features.................................................................. 10
Wireless Installation Considerations........................ 11
Setup Your DSM-510 Using an Intel® Viiv™
Technology-Based PC................................................ 12
Wireless Connection............................................... 15
Wired Connection................................................... 16
Connecting the DSM-510....................................... 17
Video Connections............................................ 17
Audio Connections............................................ 18
Network Connections........................................ 19
Using the Remote Control...................................... 20
Power on the DSM-510........................................... 21
Finalizing Your Wireless Connection with an Intel®
Viiv™ Technology Verified Router............................ 22
Finalizing Your Wireless Connection without an Intel®
Viiv™ Technology Verified Router............................ 24
Finalizing Your Wired Connection........................... 26
D-Link DSM-510 User Manual
Adding a Device without an Intel® Viiv™ Technology
Verified Router........................................................ 27
Adding a Device...................................................... 30
Setting Up the Intel® Viiv™ Media Library................ 31
Navigating to the Intel® Viiv™ Technology Settings
Screen and Images on Your PC.............................. 32
D-Link® Media Server Installation............................. 33
Settings....................................................................... 34
Options................................................................... 34
On-Screen Keyboard.............................................. 35
Network Settings.................................................... 36
Wired LAN Settings.......................................... 36
Wireless LAN Settings...................................... 37
TV Settings............................................................. 38
Audio Output Settings............................................. 38
Language Settings.................................................. 39
Settings for Ease of Use......................................... 39
Reset Settings........................................................ 40
Wireless LAN Profile Settings................................. 40
Software Update..................................................... 41
Device Information.................................................. 41
Windows® Connect Now............................................ 42
Operating the DSM-510.............................................. 47
Table of Contents
Music...................................................................... 48
Time Search..................................................... 54
Photo...................................................................... 55
Video...................................................................... 58
Time Search..................................................... 59
Intel® Viiv™ Zone..................................................... 60
Server..................................................................... 61
USB........................................................................ 62
Troubleshooting.......................................................... 63
Wireless Basics.......................................................... 69
Networking Basics..................................................... 74
Check your IP Address........................................... 74
Statically Assign an IP Address.............................. 75
General Appendix....................................................... 76
How to Check your Media....................................... 76
Convert an Earlier WMV File into WMV9 . ............. 77
Remote Control Table............................................. 83
Contacting Technical Support................................... 84
Warranty...................................................................... 85
Registration................................................................. 90
D-Link DSM-510 User Manual
Safety Information
For optimum performance, please read the following information carefully.
Safety Precautions
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert users to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
CAUTION!
THE POWER SUPPLY CORD IS USED AS THE MAIN DISCONNECT DEVICE. ENSURE THAT
THE SOCKET-OUTLET IS LOCATED/INSTALLED NEAR THE EQUIPMENT AND IS EASILY
ACCESSIBLE.
CAUTION!
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PRODUCT DAMAGE, DO NOT EXPOSE
THE UNIT TO RAIN, MOISTURE, DRIPPING, OR SPLASHING. DO NOT PLACE OBJECTS FILLED
WITH LIQUIDS UPON THE UNIT.
D-Link DSM-510 User Manual
CAUTION!
• DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN
ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK
OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS
AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
• DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH NEWSPAPERS,
TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.
• DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE
UNIT.
• DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY-FRIENDLY MANNER.
CAUTION!
TO PREVENT ELECTRIC SHOCK, MATCH THE WIDE BLADE OF THE PLUG TO THE WIDE
SLOT OF THE ELECTRICAL OUTLET AND FULLY INSERT.
This device is designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated
in this unit will protect you if you observe the following procedures for installation, use, and servicing. This device does not contain any user serviceable
parts.
• Carefully read and follow the Manual and Install Guide.
• Do not place the product near heat sources such as radiators, heat registers, stoves, or other products that produce heat.
• Do not use this product near water.
• Unplug the unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them.
• Do not overload wall outlets.
• Do not use this product during a storm. Unplug the unit from the wall outlet. If the product is to be left unattended for a long period of time. This will prevent damage to the
product due to lightning and power-line surges.
• Do not attempt to service this product yourself. Opening the cover may expose you to dangerous voltage or other hazards. For service, please contact a qualified service
technician.
D-Link DSM-510 User Manual
Radio and TV Interference:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device. This device complies with Part 15
of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Disclaimers: Certain content and services accessible via the DSM-510 may include materials owned by third parties. The users shall be entirely responsible for ensuring that they have the necessary rights to access and use such third
party content. D-Link assumes no liability for and shall not be responsible for a user’s access of such content, including but not limited to unlawfully ‘ripped’ or downloaded content. Further, D-Link does not guarantee the availability of
any third party content or services, including that which may be referenced herein, and shall not be responsible for any changes to or the lack of availability of such third party content or services.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the
user switch the connection to the “Standard Definition” output. If there are questions regarding our TV set compatibility with this model please contact our customer service center.
Subscription may be required for services from AOL, TotalVid, Live365™, My Kid’s Tunes, or Napster™.
Certain features of this device may be unavailable when accessing stored media content on UPnP AV network attached storage devices.
USB flash drive and USB hard drive sold separately. D-Link is not responsible for damage to USB drives, or loss and/or damage to files on the USB drives, due to improper installation or usage.
This device supports the codec file formats listed herein, however D-Link cannot guarantee full compatibility or proper playback with all such codec files due to modifications and/or other variations that may occur with the end-user’s
encoded codec files. Certain file formats and/or features are not accessible from USB drives attached to the USB port.
Windows® Media Connect and Windows® Connect Now require Windows® XP SP2, and can be downloaded using Windows update on your computer.
24/7 Technical Support available only in the U.S.A.
D-Link DSM-510 User Manual
1-Year Warranty available only in the U.S.A. and Canada.
Latest Software and Documentation are available at http://support.dlink.com.
MPEG-4 contains Advanced Simple Profile only without quarter pixel or global motion compensation.
Maximum wireless signal rate based on IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead lower actual data throughput rate.
Copyright ©2006 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Intel, the Intel logo
and Intel Viiv are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. The PlaysForSure logo, Windows Media,
Windows and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC. Other trademarks are the property of their respective owners. All references to speed are for comparison purposes only. Product specifications, size and shape are subject to change without notice, and
actual product appearance may differ from that depicted on the packaging. See inside packaging for warranty details. For an updated list of available online service providers, please visit http://support.dlink.com. This product is covered
by certain intellectual property rights of Microsoft© Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.
D-Link DSM-510 User Manual
Section 1 - Product Overview
Product Overview
Package
Contents
• D-Link DSM-510 High-Definition Media Player
• Quick Install Guide
• Manual, QIG, software, and warranty on CD
• 2dBi Wireless Antenna
• Ethernet (CAT5-UTP/Straight-Through) Cable
• Composite RCA Audio/Video Cable
• Remote Control with 2AAA Batteries
• Power Adapter
• Vertical Stand
If any of the above items are missing, please contact your reseller.
Minimum System Requirements
• PC with:
Windows® XP/2000
1GHz plus processor
Memory Size: 512MB or above
100MB of available hard drive space and a wireless or Ethernet network.
• TV with Composite Video, or HDMI Input.
• Stereo or A/V Receiver with Composite Audio, or Optical Digital.
• If you want to connect the DSM-510 to a Windows® XP-based PC without Intel® Viiv™ technology,
use the included CD to install the Nero MediaHome software and refer to this manual.
Recommended
•
•
•
•
Windows XP/MCE-based PC with Intel® Viiv™ technology.
An Intel® Viiv™ technology verified router.
Broadband Connection for Accessing Online Content.
Wired or Wireless Network (Wired network is recommended for video streaming).
D-Link DSM-510 User Manual
Section 1 - Product Overview
Introduction
D-Link introduces the latest addition to its multimedia family of products: the D-Link® DSM-510 High-Definition Media
Player. The DSM-510 is a device that plays back video, audio, and photos that are stored on a Media Server.
®
The DSM-510 integrates home computer systems and home entertainment centers. Digital media content can be
accessed directly from a computer, so that movies, music, and photos can be enjoyed from the comfort of your living
room. The DSM-510 connects easily to a wired or wireless network, and features 802.11g wireless technology for transfer
speeds on a wireless network. These options provide you with the maximum throughput for sharing and transferring
digital media.
Simple to setup with a sleek design that makes it a natural addition to any home entertainment center. The AV jacks
on the back panel of the DSM-510 allow for direct connection to your television. Use the included remote control to
access media content stored on your PC. Browse music files, watch videos, and display photos, all on your television!
In addition, the DSM-510 lets you access online media content through Intel® Viiv™ Zone with an existing broadband
Internet connection.
The DSM-510 adheres to the universal Plug-&-Play AV specification, allowing it to communicate with other UPnP AV
media devices.
The DSM-510 supports the majority of audio, video, and image file formats and streams them directly from your PC.
You can stream MP3, WMA, WAV, OGG Vorbis, and AIFF files from your computer and enjoy them on your home stereo
system. Watch stored videos in DVR-MS, MPEG1/2/4, AVI, or Xvid format on your television. Enjoy slideshows of your
favorite photos in JPEG, TIFF, GIF, BMP or PNG formats. Better yet, it’s easy to access the files through the television
interface using the remote control included with the DSM-510.
Experience digital media like never before with the DSM-510 High-Definition Media Player. The DSM-510 includes
everything you need to instantly access and play music, videos, and photos using your home entertainment center.
D-Link DSM-510 User Manual
Section 1 - Product Overview
Features
• Stream media content from a PC or D-Link Network Attached Storage to your entertainment center.
• Listen to digital music on your stereo system.
• View digital photos, slideshows with music, and high-definition videos on TV.
• Easily connect to your wireless network using 802.11g at up to 54Mbps.
• Connect using an Ethernet network cable at up to 100Mbps.
• UPnP AV compliant for maximum compatibility.
• Support for most popular digital media formats, including Microsoft Windows® recorded TV files (DVR-MS).
• Remote controlled TV interface for quick access to your media content.
• Experience a world of online media content through Intel® Viiv™ Zone.
• Sleek design complements your existing audio/video equipment.
• Optical digital audio output.
• HDMI output.
• 64-bit or 128-bit WEP & WPA security.
• Supports DHCP for easy connection to your home network.
• Color coded one-touch shortcut buttons on the remote, for quick access to music, photos, and videos.
D-Link DSM-510 User Manual
10
Section 2 - Installation
Wireless Installation Considerations
The D-Link High-Definition Media Player lets you access your network using a wireless connection from virtually anywhere
within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location
of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary
depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to
maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link adapter and other network devices to a
minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position
your devices so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a
45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet
(14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead
of at an angle) for better reception.
3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on
range. Try to position access points, wireless routers, and computers so that the signal passes through
drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water
(fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that
generate RF noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and
home security systems), your wireless connection may degrade dramatically or drop completely. Make
sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits
a signal even if the phone in not in use.
Note: For best video quality, a wired connection is recommended.
D-Link DSM-510 User Manual
11
Section 2 - Installation
Setup Your DSM-510 Using an Intel® Viiv™
Technology-Based PC
To use this setup guide, you must have an Intel® Viiv™ technology-based PC featuring the Intel® Viiv™ logo below. If
you do not have an Intel® Viiv™ technology-based PC at this time, please see the D-Link Media Server Installation
section on page 32.
Your device has been designed to work with Intel® Viiv™ technology-based PCs, which helps you add this device
to your network and enjoy content from your PC. To enjoy these features, you may need to update the Intel® Viiv™
software on your PC.
Intel® Viiv™ technology-based PCs have this logo on
them.
Insert the CD that came with your DSM-510 into your Intel® Viiv™ technology-based PC, and follow the on-screen
instructions to guide you through the update process.
IMPORTANT:
•This software will enable the instant on/off power management features of your computer, which allows your new
device to “wake-up” your PC to access content and services marked “Enjoy with Intel® Viiv™ technology”.
•You may need to restart your PC to begin using the Intel® Viiv™ software.
D-Link DSM-510 User Manual
12
Section 2 - Installation
Turn on the computer and insert the D-Link DSM-510 Driver CD into the CD-ROM
drive.
Click Install Media Server
If the CD Autorun function does not automatically start on your computer, click
Windows® Start > Run. In the Run command box type “D:\DSM510.exe”, where D:
represents the drive letter of your CD-ROM.
At the Intel® Viiv™ setup screen, select the option Yes, start Intel Viiv Settings
now (recommended).
Click Next
Click Next
D-Link DSM-510 User Manual
13
Section 2 - Installation
After the installation, the following screens will appear.
Click add a device
Note: Intel® Viiv™ technology continuously scans the network for new devices. If a new device is found, a pop-up alert
is displayed on the desktop.
Click start
D-Link DSM-510 User Manual
14
Section 2 - Installation
Wireless Connection
Select the option wirelessly.
If you select connecting it to the router with an Ethernet network cable, please
skip to “Wired Connection” on page 16.
Click next
If the Intel® Viiv™ software does not find an Intel® Viiv™ technology verified router, then connect your DSM-510 (see page
17). Power on your DSM-510 (see page 21) and follow the instructions that apply to finalizing your wireless connection
without an Intel® Viiv™ technology verified router.
Intel® Viiv™ technology verified routers have
this logo on them.
If an Intel® Viiv™ technology verified router is detected, you should see the adding
a device to your home network screen. Proceed to page 17 to connect your
DSM-510 and power it up for the first time.
Connect your DSM-510, please continue to page 17.
D-Link DSM-510 User Manual
15
Section 2 - Installation
Wired Connection
For a wired connection, select the option connecting it to the router with an
Ethernet network cable.
Click next
At the adding a device to your home network screen, leave your PC and connect
your DSM-510 (see page 17).
Connect your DSM-510, please continue to page 17.
D-Link DSM-510 User Manual
16
Section 2 - Installation
Connecting the DSM-510
All audio, video, and networking connections are located on the rear panel of the DSM-510.
Video Connections
Select one of two ways to connect video to your DSM-510:
Composite Audio/Video Connector
• Plug the supplied 3.5mm mini-jack connector into the DSM-510. Plug the opposite end
(the yellow video cable and the red and white audio cables) into your television input.
HDMI
• Plug the HDMI cable into the HDMI connector on the back panel of the DSM-510.
Plug the opposite end to the matching HDMI connector on your television or audio/video
system.
Note: This cable is not supplied.
By default the DSM-510 will automatically detect and switch between Digital (HDMI)
and Analog (Composite) modes.
High-Definition Multimedia Interface (HDMI) supports standard, enhanced, or high-definition video, plus multi-channel
digital audio on a single cable.
D-Link DSM-510 User Manual
17
Section 2 - Installation
Audio Connections
Select one of two ways to connect audio to your DSM-510:
Composite Audio/Video Connector
• Plug the supplied 3.5mm mini-jack connector into the DSM-510. Plug the opposite end
(the yellow video cable and the red and white audio cables) into your television/receiver
input.
Optical Digital Audio
• Connect an optical audio connector into the S/PDIF connector on the DSM-510 and the
matching opposite end of the cable to the audio input of your audio system.
Note: This cable is not supplied.
D-Link DSM-510 User Manual
18
Section 2 - Installation
Network Connections
Select one of two ways to connect your DSM-510 to your network:
RJ-45 Ethernet Connector
• Connect the supplied Ethernet cable to the network cable connector, and attach the
other end to a router or hub on your network.
Wireless Antenna
• Attach the supplied antenna by threading it onto the antenna connector. Be sure the
antenna is secure and in an upright position.
D-Link DSM-510 User Manual
19
Section 2 - Installation
Using the Remote Control
1. Power
2. Alphanumeric Keys
3. HOME
4. SHIFT
5. DELETE
6. VOLUME + & 7. PAGE UP & DOWN
8. MUTE
9. BACK
10. Enter & Navigation Buttons
11. MENU
12. SETUP
13. Color-Coded Shortcut Keys
14. USB
15. Stop, Play/Pause, REV,
FF, PREV, and NEXT
16. REPEAT
17. SHUFFLE
18. SEARCH
19. INFO
20. SLOW
21. A-B
22. L/R
10
11
12
13
14
15
16
19
20
18
22
21
17
Note: Please see the Remote Control Table in the Appendix on page 83 for more information on the functionality of
the DSM-510 remote control..
D-Link DSM-510 User Manual
20
Section 2 - Installation
Power on the DSM-510
Plug in the DSM-510’s power cable into the back panel connector, the unit should power
on immediately.
Note: If you are using the composite or HDMI video connection, the DSM-510 will automatically
detect the correct video signal.
If you are connecting the DSM-510 wirelessly and have an Intel® Viiv™ technology verified router,
please continue to page 22.
If you are connecting the DSM-510 wirelessly and do not have an Intel® Viiv™ technology verified
router, please continue to page 24.
If you are connecting through a wired Ethernet cable, please continue to page 26.
D-Link DSM-510 User Manual
21
Section 2 - Installation
Finalizing Your Wireless Connection with an Intel® Viiv™
Technology Verified Router
Click Yes, if you have an Intel® Viiv™ technology verified router. Adding a device to
a wireless network using the Intel® Viiv™ Settings requires an Intel® Viiv™ technology
verified router featuring the logo on page 15. If you do not have a verified router,
please see the D-Link Media Server Installation section in this manual.
Click OK
Note: Skip to page 24, if you do not have an Intel® Viiv™ technology verified router.
After clicking OK, the next screen will provide you with a temporary four-character
passcode. Please memorize or write down this passcode.
Return to your PC and follow the on-screen instructions to complete the addition
of your device to the network.
Click next
D-Link DSM-510 User Manual
22
Section 2 - Installation
Enter the passcode before the 10-minute timer expires.
Click next
Note: If the timer expires before you enter the temporary passcode, you can obtain
a new passcode by starting the timer again from the DSM-510.
After the device has been added to the network, return to your DSM-510.
Click OK
After you have clicked OK, a home page will appear. Please return to your PC to complete the addition of your
device.
Please Continue to page 30!
D-Link DSM-510 User Manual
23
Section 2 - Installation
Finalizing Your Wireless Connection without an
Intel® Viiv™ Technology Verified Router
Click CANCEL, if you do not have an Intel® Viiv™ technology verified router.
Click CANCEL
At the next screen, select Scan for wireless LANs and click OK.
Using your remote control, select a wireless
network from the list and press ENTER.
D-Link DSM-510 User Manual
24
Section 2 - Installation
Select the Encryption Type and the Cryptography Key to configure your wireless
settings. Once you’ve completed all of your settings, please click OK.
Click OK
If you need to manually configure the IP Settings, click the IP Address Settings
button. You will see a new screen appear.
Click OK
To manually enter the IP address information, select NO from Get IP Address
and press the ENTER button on your remote control. The navigation arrows on
your remote control will allow you to select the corresponding field that needs to
be updated. Press the ENTER button on your remote control to select the field
and use the number keys to input the information. Press ENTER when you have
completed entering the information. Click OK after you’ve finished updating the IP
Address Settings screen.
Please return to your PC to complete the addition of your device.
Please Continue to page 27!
D-Link DSM-510 User Manual
25
Section 2 - Installation
Finalizing Your Wired Connection
If you connected to your network using a wired Ethernet cable, you will see this
screen.
Click Finish
After you have clicked OK, a home page will appear. Please return to your PC to
complete the addition of your device.
Click next
Please Continue to page 30!
D-Link DSM-510 User Manual
26
Section 2 - Installation
Adding a Device without an Intel® Viiv™ Technology
Verified Router
Click view network map
Note: Your device may have a “?” on it, this means that it is not approved yet.
Click your media device
After clicking on the device, the next screen will provide details about this
device.
Click next
D-Link DSM-510 User Manual
27
Section 2 - Installation
Select approved if you want the media device to allow access to the network.
Click next
The media device should be automatically selected.
Click next
When you see this screen, click yes to grant access for your media device.
Click next
D-Link DSM-510 User Manual
28
Section 2 - Installation
After you granted access to the media device you should be returned to the network
map menu. Notice that the “?” no longer appears on your media device.
Click back
After you’ve clicked the back button you will be returned to the main menu. Click
the update media library button to set up your Intel® Viiv™ Media Library.
Click update media library
Please Continue to page 31!
D-Link DSM-510 User Manual
29
Section 2 - Installation
Adding a Device
Your PC will begin adding the device. Please wait…this may take up to five minutes.
When it has been added, you will see this screen, listing the device name and type.
Click next
The media device should be automatically selected.
Click next
When you see this screen, you have successfully added your device to the
network.
Click next
D-Link DSM-510 User Manual
30
Section 2 - Installation
Setting Up the Intel® Viiv™ Media Library
In order to access the media content on your PC, you must setup your Intel® Viiv™
Media Library.
Click next
It is recommended to select Standard Update.
Click next
D-Link DSM-510 User Manual
31
Section 2 - Installation
When you see this screen, you have successfully completed the setup of your
Intel® Viiv™ Media Library.
Click finish
Return to your DSM-510 unit and you should see the following menu. Use your
remote control to navigate through the menu.
Navigating to the Intel® Viiv™ Technology Settings Screen
and Images on Your PC
You may navigate to the Intel® Viiv™ settings window either by selecting the Intel® Viiv™ logo on your desktop or system
tray. The logo can also be found in the More Programs area in Windows® XP Media Center Edition 2005.
You are now ready to use your DSM-510!
D-Link DSM-510 User Manual
32
Section 2 - Installation
D-Link® Media Server Installation
Note: Do not install the Media Server software if you have an Intel® Viiv™ technology verified PC, because you
can use the Intel® Viiv™ Media Server that is included with your Intel® Viiv™ technology verified PC.
To share audio, video, and photo files from your computer, it is necessary to install the Nero MediaHome software
on any PC that is not Intel® Viiv™ technology verified. The Nero MediaHome software allows you to point to the folders
on your PC’s hard drive that contain the audio, video, and photo files you want to share. The Nero MediaHome software
then streams the content to your DSM-510 via your wired/wireless network connection.
Currently the DSM-510 only connects to one Media Server at a time. If more than one PC contains files you want to
share, you can select one of the following options:
1. Copy all of the files to one computer designated to run the Nero MediaHome software.
2. Map network drives from the computer with the Nero MediaHome software to additional computers that contain files
you want to share. This method also allows you to share files from computers that cannot run the Nero MediaHome
software such as Macintosh systems. The computer running the Nero MediaHome software must always be on
when streaming content from any computer.
3. Install the Nero MediaHome software on each computer. You can only connect to one server at a time. To connect
to another server, you must press the Media Server key on the remote control, or go to the home screen and select
Server.
4. Power on your DSM-510, and do the following based on your network connection:
		 • Wireless: Select the option Cancel. Connect to your network by selecting a network name and by providing the
necessary information for authentication. Please refer to page 24 for step-by-step instructions.
		 • Wired: After powering on your DSM-510 your network will automatically be detected. Click Finish.		
D-Link DSM-510 User Manual
33
Section 3 - Configuration
Settings
Press the Setup button on your remote control to configure your DSM-510.
Options
Network Settings: This option allows you to modify your wireless and wired settings. You can
also access your WCN® setup wizard from this screen.
TV Settings: This option allows you to change your video output type between Digital
(HDMI) and Analog (Composite), as well as the resolution size.
Audio Output Select the audio output type for different audio formats.
Settings:
Language Settings: This option allows you to choose the language that the interface is
displayed in.
Settings for Ease of Here you can configure settings for your device’s startup, which will allow
Use: easier access to your media.
Reset Settings: This will restart your device to factory settings.
Wireless LAN Here you can view previously accessed wireless connections as well as choose between which one to connect to.
Profile Settings:
Software Update: This option allows you to update the DSM-510.
Device Information: This option displays information concerning the DSM-510.
D-Link DSM-510 User Manual
34
Section 3 - Configuration
On-Screen Keyboard
In order to input information, you must use the DSM-510 keyboard interface.
When information is needed within an input box, click the MENU key on your
remote control and select the Keyboad Input option.
Use the selection arrows and the ENTER button to select from Numbers,
Lower (lower case alphabet), Upper (upper case alphabet), or Symbol. The
SHIFT key on your remote control can also toggle between these options
if pressed repeatedly. Once you’ve selected your character type, use the
selection arrows on your remote control to select the characters you want to
input. When you have finished, select OK.
D-Link DSM-510 User Manual
35
Section 3 - Configuration
Network Settings
Wired LAN Settings: If you want to connect through an Ethernet cable, then select this
option.
Wireless LAN Select this option if you are using the antenna to connect wirelessly to a
Settings: server.
Wired LAN Settings
Get IP Address: Clicking this button will retrieve the IP address automatically.
IP Address: Input the IP Address.
Subnet Mask: Input the Subnet Mask.
Default Gateway: Input the Default gateway.
DNS Server: In case a DNS server exists in the network, input the IP Address of the DNS
server.
MAC Address: Input the MAC Address.
D-Link DSM-510 User Manual
36
Section 3 - Configuration
Wireless LAN Settings
Scan for wireless Click this button to search for wireless LANs, and select your Access
LANs: Point.
Manual Click this button to manually connect to the network (see the following
Configuration: screen).
Windows Connect Click this option if you want to use Windows Connect Now® to configure
Now: your device’s wireless connection. If you want to configure your device’s
wireless connection, please continue to page 42.
Manual Configuration
MODE: Choose between Ad-Hoc or Infrastructure.
Ad-Hoc should be selected when the DSM-510 is directly connected to
other wireless network devices without an access point.
Infrastructure should be selected when the DSM-510 is connected to
the wireless LAN where an accesss point device exists.
Wireless LAN Type: Select between either 802.11b/g or 802.11a.
SSID: Using the software keyboard input the SSID, which should be used by
the existing wireless network.
Encryption Type: Select between None, WEP, or WPA.
Cryptography Key: When WEP or WPA is selected in Encryption Type, two boxes will appear (the Index Selection box and the
Cryptography Key input box.
Index Selection box allows you to select an Index number from 1 to 4. Each index number saves a Cryptography
Key.
Cryptography Key allows you to enter the WEP or WPA key used in the existing wireless network.
D-Link DSM-510 User Manual
37
Section 3 - Configuration
TV Settings
Output Type: Select between Digital (HDMI) and Analog (Composite).
Screen Size: Select between 4:3 or 16:9.
Resolution: If the output type is set to Digital (HDMI), select between Auto, 480i, 480p,
1080i, and 720p. If the output type you selected is Analog (Composite),
select between 480i, 480p, 1080i, and 720p.
Audio Output Settings
AAC: You can choose to output audio in LPCM or have it turned off to the digital
output.
Dolby Digital: You can choose to output audio in 2 channel or 5.1 for analog. You can
also change the digital output from LPCM to Dolby Digital or off.
WMA: You can choose to output audio in 2 channel or 5.1 for analog. You can
also change the digital output from LPCM to off.
Auto Volume Control There are three variable settings to select from: Small, Moderate, and
Strength: Strong. These control tha audio output depending on the strength of the
media file.
D-Link DSM-510 User Manual
38
Section 3 - Configuration
Language Settings
Select the available language that best fits your interface.
Settings for Ease of Use
Connect to last On startup your DSM-510 will try to access the last media source it was
accesed server connected to.		
automatically:
Connect to single If only one media source or USB is detected the media server will connect
server/USB to it automatically.
automatically:
Resume last screen After turning on the unit, the last screen accessed will be displayed.
from standby:
D-Link DSM-510 User Manual
39
Section 3 - Configuration
Reset Settings
You can reset the DSM-510’s settings through this screen.
Wireless LAN Profile Settings
To exchange connection priorites, click the MENU button on your remote control.
Set to Exchange: Pick the wireless access point that you want to exchange connection
priorites.
Exchange: This option will initialize the move between wireless access points.
Remove: This will remove the wireless access point profile from the list.
Note: In order for the exchange to take effect, you must power cycle the
DSM-510 (meaning you must turn off the DSM-510 and turn it back on
again).
D-Link DSM-510 User Manual
40
Section 3 - Configuration
Software Update
Update over Select this option to update the DSM-510 through an Internet
Internet: connection.
Update from USB: Select this option to update the DSM-510 through a USB device.
Device Information
This screen will display information about the DSM-510.
Device Name: Displays the name of the device.
Version: This will show the current version of the software that the device is
using.
MAC Address: Shows the Wired and Wireless MAC address of the DSM-510.
D-Link DSM-510 User Manual
41
Section 3 - Configuration
Windows® Connect Now
If you already have wireless settings configured on your PC, instead of using the Intel® Viiv™ setup , you can use
Windows® Connect Now (WCN) to configure the wireless settings on your DSM-510.
Note: WCN is only available on PCs running Windows® XP with Service Pack 2 installed.
Go to Start > All Programs > Accessories > Communications and click Wireless
Network Setup Wizard.
Your system will display the Setup Wizard Welcome screen. Click Next to continue.
Click Next
D-Link DSM-510 User Manual
42
Section 3 - Configuration
Select to add a new device to your existing wireless network and click Next to
continue.
Click Next
The wizard provides two methods for setting up a wireless network. Select to use a
USB flash drive to save your wireless network settings and click Next to continue.
Note: Using a USB flash drive is recommended.
Click Next
D-Link DSM-510 User Manual
43
Section 3 - Configuration
Plug your flash drive into a USB port on this computer. The drive letter will appear
in the pull down menu. You can choose to use this drive or select another drive.
Click Next to save your wireless settings to the USB flash drive. This may take a
few seconds.
Click Next
This screen will appear when the wireless settings have been saved to the USB
flash drive.
Click Next
Next, remove the USB Flash Drive from your PC and insert into the USB port on the back panel of the DSM-510.
D-Link DSM-510 User Manual
44
Section 3 - Configuration
The following screen will appear, prompting you to wait for the detection to take
place.
The following screen confirms that your wireless settings have been applied.
Click OK.
D-Link DSM-510 User Manual
45
Section 3 - Configuration
Next, remove the USB Flash Drive from the DSM-510 and insert it back into the USB
port on your PC. Click Next to continue.
Click Next
Wireless configuration using WCN is now complete. The setup wizard will display
the devices that have been setup with your wireless network. Click Finish.
Click Finish
Windows® Connect Now has been configured!
D-Link DSM-510 User Manual
46
Section 4 - Operation
Operating the DSM-510
VIDEO: Click Enter on your remote control to show the Video Contents selection
screen.
MUSIC: Click Enter on your remote control to show the Music Contents selection
screen.
PHOTO: Click Enter on your remote control to show the Photo Contents selection
screen.
SERVER: Click Enter on your remote control to show the Server selection screen.
USB: Click Enter on your remote control to show the Connected USB Device
List.
OPTION: Click Enter on your remote control to show the Options screen.
Note: To directly access this screen, press the Server button on the remote control.
Note: If the Intel® Viiv™ technology verified PC is powered down, selecting the Intel® Viiv™ Media Server will power it back up to provide
access to music, photo, video, and the Intel® Viiv™ Zone.
Menu Basics
The DSM-510 uses an on-screen menu interface. As you move through the menus, you will use the selection arrows
on the remote control to move up, down, right and left. The highlight bar moves from item to item as you press the
selection arrows. You will need to press ENTER on the remote control to access the item. The Page Up and Page Down
buttons can be used to navigate through the track list one page at a time. Once you are in a particular category, you
can press the MENU button on your remote control to access the pulldown menu within that category.
D-Link DSM-510 User Manual
47
Section 4 - Operation
Music
Music Quality
Your music listening experience on the media player depends upon the quality of your digital music files on your PC.
Avoid quality settings below 48kbps as they create low quality audio. For CD quality music, rip your MP3s at 128kbps
or higher, with a sample rate of 44.1kHz.
Supported Music Formats
The following music file formats are supported:
• MP3 (up to 320 kbps)
MPEG-1, Layer 3 Audio file -The standard Internet
music file format. This is the most commonly used audio
format.
• WMA (Does not support WMA lossless, WMA Pro)
Windows Media Audio file - Supported by the Microsoft
Windows Media player and some music jukebox programs.
Also supports WMDRM protected WMA files downloaded
from online services.
• WAV
WAV was developed by Microsoft and IBM. WAV sound files
end in .wav and are compatible with Windows applications
supporting audio.
• AIFF (AIFF files must be encoded in PCM format only.)
AIFF (Audio Interchange File Format) was developed by Apple Computers and is the standard audio format for
Macintosh computers. File extensions are .AIF or .IEF.
• MPEG 1 and MPEG 2
Moving Pictures Experts Group created standards for compressing audio and video. Audio uses the file extension
.mp3.
• OGG Vorbis
Open source audio format. Uses the file extension .ogg.
D-Link DSM-510 User Manual
48
Section 4 - Operation
Accessing Music
Select the MUSIC category from the HOME page or click the MUSIC button on the remote control. Select a category,
by using the down arrow and up arrow on the remote control to navigate (choose from Playlist, Genre, Artist, Album,
All Music, Folders, or Favorites). Select your option by clicking ENTER. If you want to play all of the tracks within the
category you selected, simply press the Play button. If you want to play just one track, use the up arrow and down
arrow buttons to navigate one track at a time. After the appropriate track is highlighted, press ENTER on the remote
control. The Page Up and Page Down buttons can be used to navigate through the track list one page at a time.
Playing a Track
Once you enter the music menu, there are several ways that you can view tracks. You can view Playlist, Genre, Artist,
Album, All Music, Folders, or Favorites.
If you select to view All Music (see the following menu), then use
the selection arrows to navigate to the track you wish to play.
Once you have located the appropriate track, highlight it and
press ENTER or Play on the remote control. The track will begin
playing on your stereo or television speakers.
To play all of the tracks visible in this category, simply press
Play.
D-Link DSM-510 User Manual
49
Section 4 - Operation
Playing a Group of Songs
Select a music folder and press the Play button on the remote control, all of the songs within the selected folder will
be played. You can highlight a genre of music and all files that are associated with that genre will be displayed. Genre
categories are defined when an audio file is created.
You can play songs within a folder from a specified track forward. For instance, if you have a folder with ten tracks and
select Track 3, clicking on the Play button will play tracks 3 through 10.
Creating Music Playlists using 3rd Party Software
Use your favorite music software on your PC to create music playlists. A playlist allows you to specify exactly what tracks
to play and in what order to play them. For example, create a “favorites” playlist and just listen to your favorite tracks.
The DSM-510 will play tracks from playlists you create on your computer. The media player supports playlists in three
standard formats:
• m3u Playlist File
• pls Playlist File
• wpl Playlist File
Software for playing music on your PC can be used to create playlists. WinAmp™ and Microsoft Windows® Media
Player™ are two examples.
D-Link DSM-510 User Manual
50

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Print high-res
XMP Toolkit                     : 3.1-702
Modify Date                     : 2007:02:06 10:53:39-08:00
Create Date                     : 2007:02:06 10:41:06-08:00
Metadata Date                   : 2007:02:06 10:53:39-08:00
Creator Tool                    : Adobe InDesign CS2 (4.0.2)
Format                          : application/pdf
Document ID                     : uuid:43e03d19-54d0-4215-93e0-6b315adb7b3e
Instance ID                     : uuid:e3c1cd30-fb18-42c9-9d1e-da93a9dedff5
Producer                        : Adobe PDF Library 7.0
Has XFA                         : No
Page Count                      : 50
Creator                         : Adobe InDesign CS2 (4.0.2)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: KA2DSM510A1

Navigation menu