D Link DWL-1000APPLUS AirPlus 2.4GHz Wireless Access Access Point User Manual dwl1000AP QIG En

D Link Corporation AirPlus 2.4GHz Wireless Access Access Point dwl1000AP QIG En

Manual

2This product can be set up usingThis product can be set up usingThis product can be set up usingThis product can be set up usingThis product can be set up usingany current web browser, i.e.,any current web browser, i.e.,any current web browser, i.e.,any current web browser, i.e.,any current web browser, i.e.,Internet Explorer 6 or NetscapeInternet Explorer 6 or NetscapeInternet Explorer 6 or NetscapeInternet Explorer 6 or NetscapeInternet Explorer 6 or NetscapeNavigator 6.2.3.Navigator 6.2.3.Navigator 6.2.3.Navigator 6.2.3.Navigator 6.2.3.DWL-1000AP+DWL-1000AP+DWL-1000AP+DWL-1000AP+DWL-1000AP+D-Link D-Link D-Link D-Link D-Link AirAirAirAirAirPremierPremierPremierPremierPremierTMTMTMTMTMWireless Access PointWireless Access PointWireless Access PointWireless Access PointWireless Access Point5V 2.5A DC Power Adapter©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software andspecifications subject to change without notice. DWL-1000AP+.11122002Before You BeginBefore You BeginBefore You BeginBefore You BeginBefore You BeginCheck Your Package ContentsCheck Your Package ContentsCheck Your Package ContentsCheck Your Package ContentsCheck Your Package ContentsDWL-1000AP+ Wireless AccessPointCD-ROM (containing Manual and Warranty)Ethernet (CAT5 UTP/Straight Through) CableIf any of the above items are missing, please contact your reseller.It’s best to use a computer (with an Ethernet adapter) that is connected to a switch forconfiguring the DWL-1000AP+. The default IP address for the DWL-1000AP+ is192.168.0.50 with a Subnet Mask of 255.255.255.0. You will need to assign yourcomputer a Static IP address within the same range as the DWL-1000AP+’s IP ad-dress for the purpose of configuring the DWL-1000AP+. See the Manual on the CD-ROM if you need assistance in assigning a Static IP address for your networkadapter. Using a power supply with a different voltagerating will damage and voidthe warranty of this product.
3FCC StatementFCC StatementFCC StatementFCC StatementFCC StatementThis equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, usesand can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communication. However, there isno guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more ofthe following measures:¡E Reorient or relocate the receiving antenna.¡E Increase the separation between the equipment and receiver.¡E Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth foran uncontrolledenvironment. This equipment should be installed and operated with aminimum of 20 cm(approximately 8 inches) between the radiator and your body.
4Connecting The DWL-1000AP+ WirelessConnecting The DWL-1000AP+ WirelessConnecting The DWL-1000AP+ WirelessConnecting The DWL-1000AP+ WirelessConnecting The DWL-1000AP+ WirelessAccess Point To Your NetworkAccess Point To Your NetworkAccess Point To Your NetworkAccess Point To Your NetworkAccess Point To Your Network A. Receptor forPower Adapter.B. LAN PORTSLAN port 2 is forconnecting toanother DWL-1000AP+ to provideredundency & loadbalancingD. AntennasUsed to wirelesslyconnect to 802.11badapters.A. First, connect the power adapter to the receptor at the back panel of the DWL-1000AP+ and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.B. Using a Straight-Through Ethernet cable, insert one end of the cable to the LAN ports on the back panel of the DWL-1000AP+ and the other end of the cable to a switch. Note: The switch must be connected to the computer to be used to configure the DWL- 1000AP+. The Link LED light will illuminate to indicate a proper Ethernet connection.C. Computers with 802.11b wireless adapters can connect to the DWL- 1000AP+. The DWL-650+ AirPlus Wireless Cardbus Adapter and the DWL-520+ AirPlus Wireless PCI Adapter will connect, out of the box, with the DWL-1000AP+, using their default settings.Reset ButtonPressing this button restoresthe Router to its original factorydefault settings. C. LAN PORTSLAN port 1is forconnecting to aswitch on the localnetwork with anethernet cable
5Using The Setup WizardUsing The Setup WizardUsing The Setup WizardUsing The Setup WizardUsing The Setup WizardWhen you have completedthe steps in this QuickInstallation Guide, yourconnected network shouldlook similar to this:Open your Webbrowser and type“http://192.168.0.50”into the URL addressbox. Then press theEnter or Return key.The logon pop-upscreen will appear.Type “admin” for theusername and leave thepassword field blank.Click OK
6Using The Setup Wizard (continued)Using The Setup Wizard (continued)Using The Setup Wizard (continued)Using The Setup Wizard (continued)Using The Setup Wizard (continued)Once you havelogged in, the Homescreen will appear.You will see thefollowing screens.Click Run WizardClick Next
7Click NextStep 1 - Set up yournew password. Youhave the option toestablish a password.Click NextClick NextStep 2 - Wireless SetupThe default wirelesssettings are:SSID = defaultChannel = 6You can change thesesettings to match anexisting wireless network.Step 3 - EncryptionThe DWL-1000AP+ iscapable of three levels ofwireless encryption - 64-bit,128-bit, and 256-bit. Bydefault the encryption isdisabled. You can changethe encryption settings formore secure wirelesscommunication.
8Your Setup is Complete!Your Setup is Complete!Your Setup is Complete!Your Setup is Complete!Your Setup is Complete!Click RestartClick Close
9You will be returned to the Home tab.Click to ExitNote! Refer to the Manual for information on802.1x setup.For additional settings or information, refer to the Advanced, Tools,or Status tabs on the web-management interface; or to the manuallocated on the CD-ROM.
10Technical SupportTechnical SupportTechnical SupportTechnical SupportTechnical SupportYou can find the most recent software and user documentation on the D-Linkwebsite.D-Link provides free technical support for customers within the United Statesfor the duration of the warranty period on this product.U.S. customers can contact D-Link technical support through our web site orby phone.D-Link Technical Support over the Telephone:(877) 453-546524 hours a day, seven days a weekD-Link Technical Support over the Internet:http://support.dlink.com

Navigation menu