D Link DWL-1000APPLUS AirPlus 2.4GHz Wireless Access Access Point User Manual dwl1000AP QIG En

Download:
Mirror Download [FCC.gov]
Document ID	290644
Application ID	glVyL8kErN7IhWGc7V4jSQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	144.05kB (1800587 bits)
Date Submitted	2002-12-18 00:00:00
Date Available	2002-12-05 00:00:00
Creation Date	2002-11-29 18:17:01
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2002-12-02 13:31:54
Document Title	dwl1000AP+_QIG_En
Document Creator	Adobe PageMaker 7.0
Document Author:	02087

This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3.
DWL-1000AP+
D-Link AirPremierTM
Wireless Access Point
Before You Begin
It’s best to use a computer (with an Ethernet adapter) that is connected to a switch for
configuring the DWL-1000AP+. The default IP address for the DWL-1000AP+ is
192.168.0.50 with a Subnet Mask of 255.255.255.0. You will need to assign your
computer a Static IP address within the same range as the DWL-1000AP+’s IP address for the purpose of configuring the DWL-1000AP+. See the Manual on the CDROM if you need assistance in assigning a Static IP address for your network
adapter.
Check Your Package Contents
DWL-1000AP+ Wireless Access
Point
CD-ROM (containing Manual and Warranty)
Ethernet (CAT5 UTP/Straight Through) Cable
5V 2.5A DC Power Adapter
Using a power supply
with a different voltage
rating will damage and void
the warranty of this product.
If any of the above items are missing, please contact your reseller.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DWL-1000AP+.11122002
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communication. However, there is
no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
¡E Reorient or relocate the receiving antenna.
¡E Increase the separation between the equipment and receiver.
¡E Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled
environment. This equipment should be installed and operated with a
minimum of 20 cm
(approximately 8 inches) between the radiator and your body.
Connecting The DWL-1000AP+ Wireless
Access Point To Your Network
A.
First, connect the power adapter to the receptor at the back panel of
the DWL-1000AP+ and then plug the other end of the power adapter
to a wall outlet or power strip. The Power LED will turn ON to indicate
proper operation.
B. Using a Straight-Through Ethernet cable, insert one end of the cable to
the LAN ports on the back panel of the DWL-1000AP+ and the
other end of the cable to a switch. Note: The switch must be
connected to the computer to be used to configure the DWL1000AP+. The Link LED light will illuminate to indicate a proper
Ethernet connection.
C. Computers with 802.11b wireless adapters can connect to the DWL1000AP+. The DWL-650+ AirPlus Wireless Cardbus Adapter and the
DWL-520+ AirPlus Wireless PCI Adapter will connect, out of the box,
with the DWL-1000AP+, using their default settings.
C. LAN PORTS
B. LAN PORTS
LAN port 2 is for
connecting to
another DWL1000AP+ to provide
redundency & load
balancing
D. Antennas
Used to wirelessly
connect to 802.11b
adapters.
A. Receptor for
Power Adapter.
LAN port 1is for
connecting to a
switch on the local
network with an
ethernet cable
Reset Button
Pressing this button restores
the Router to its original factory
default settings.
When you have completed
the steps in this Quick
Installation Guide, your
connected network should
look similar to this:
Using The Setup Wizard
Open your Web
browser and type
“http://192.168.0.50”
into the URL address
box. Then press the
Enter or Return key.
The logon pop-up
screen will appear.
Type “admin” for the
username and leave the
password field blank.
Click OK
Using The Setup Wizard (continued)
Once you have
logged in, the Home
screen will appear.
Click Run Wizard
You will see the
following screens.
Click Next
Step 1 - Set up your
new password. You
have the option to
establish a password.
Click Next
Step 2 - Wireless Setup
The default wireless
settings are:
SSID = default
Channel = 6
You can change these
settings to match an
existing wireless network.
Click Next
Step 3 - Encryption
The DWL-1000AP+ is
capable of three levels of
wireless encryption - 64-bit,
128-bit, and 256-bit. By
default the encryption is
disabled. You can change
the encryption settings for
more secure wireless
communication.
Click Next
Your Setup is Complete!
Click Restart
Click Close
You will be returned to the Home tab.
Click to Exit
For additional settings or information, refer to the Advanced, Tools,
or Status tabs on the web-management interface; or to the manual
located on the CD-ROM.
Note! Refer to the Manual for information on
802.1x setup.
Technical Support
You can find the most recent software and user documentation on the D-Link
website.
D-Link provides free technical support for customers within the United States
for the duration of the warranty period on this product.
U.S. customers can contact D-Link technical support through our web site or
by phone.
D-Link Technical Support over the Telephone:
(877) 453-5465
24 hours a day, seven days a week
D-Link Technical Support over the Internet:
http://support.dlink.com
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2002:11:29 18:17:01+08:00
Modify Date                     : 2002:12:02 13:31:54+08:00
Subject                         : dwl1000AP+_QIG_En
Page Count                      : 9
Creation Date                   : 2002:11:29 18:17:01+08:00
Mod Date                        : 2002:12:02 13:31:54+08:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : 02087
Keywords                        : 
Metadata Date                   : 2002:12:02 13:31:54+08:00
Creator                         : 02087
Title                           : dwl1000AP+_QIG_En
Description                     : dwl1000AP+_QIG_En

EXIF Metadata provided by EXIF.tools