D Link IR513A2 Wireless N Pocket Router User Manual DIR 513 20130115

Download:
Mirror Download [FCC.gov]
Document ID	1893334
Application ID	OKj/Km28QTzGRH6QgzgXuw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	147.16kB (1839504 bits)
Date Submitted	2013-02-04 00:00:00
Date Available	2013-02-04 00:00:00
Creation Date	2013-01-15 11:54:27
Producing Software	Acrobat Distiller 10.1.1 (Windows)
Document Lastmod	2013-01-30 16:06:26
Document Title	DIR-513_User Manual_20130115.pdf
Document Creator	Adobe Acrobat Pro 10.1.1
Document Author:	Vicky

Preface
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization
of such revisions or changes.
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Copyright Š 2012 by D-Link Systems, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc.
Section 1 - Product Overview
Product Overview
Package Contents
Check for the supplied accessories below:
DIR-513 Wireless N Pocket Router
Quick Installation Guide
Note:
this product.
Section 1 - Product Overview
System Requirements
Network Requirements
X
I
"OC@MI@O =GD@ION
X
 
"OC@MI@O
Computer with the following:
X
4DI?JRN] 
*<>DIOJNC 
JM
)DIPS =JH
OJ
?JRIGJ@
-<>F

X
I
DINO Wireless page
to view what wireless client are connected to this device.
Wireless Settings: Manual Wireless Network Setup
The manual wireless network setup option allows users to configure
the wireless settings of this device manually. This option is for the more
advanced user and includes all parameters that can be configured for
wireless connectivity.
To initiate the Manual Wireless Setup page, click on the Manual Wireless
Connection Setup button.
On this page the user can configure all the parameters related to the
wireless connectivity of this router.
Section 3 - Software Configuration
The following parameters will be available for wireless distribution
system (WDS) configuration:
Enable WDS: Check the box to enable the WDS function. If
you do not want to use WDS, uncheck the box
to disable the service. Select the time frame that
you would like your WDS enabled. The schedule
may be set to Always. Any schedule you create will
be available in the drop-down menu. Click New
Schedule to create a new schedule.
Wi-Fi Network The Service Set Identifier (SSID) is the name of
Name: your wireless network. Click Site Survey to select
an existing SSID or create a name using up to 32
characters. The SSID is case-sensitive.
Security Mode: Select either WEP or WPA-Personal for security
encryption.
Section 3 - Software Configuration
The following parameters will be available for configuration:
Wireless Band: Displays the wireless band being configured. In
this option we find that the following parameters
will be regarding the 2.4GHz band.
Enable Wireless: Check the box to enable the wireless function. If
you do not want to use wireless, uncheck the box
to disable all the wireless functions. Select the time
frame that you would like your wireless network
enabled. The schedule may be set to Always. Any
schedule you create will be available in the dropdown menu. Click New Schedule to create a new
schedule.
Wireless The Service Set Identifier (SSID) is the name of
Network Name: your wireless network. Create a name using up to
32 characters. The SSID is case-sensitive.
802.11 Mode:
Enable Auto
Channel Scan:
Wireless
Channel:
Transmission
Rate:
Channel Width:
Visibility Status:
Here the user can manually select the preferred frequency band to use for this wireless network.
The auto channel selection setting can be selected to allow this device to choose the channel with the least amount of
interference.
By default the channel is set to 1. The Channel can be changed to fit the channel setting for an existing wireless network or to
customize the wireless network. If you enable Auto Channel Selection, this option will be greyed out.
Select the transmit rate. It is strongly suggested to select Best (Automatic) for best performance.
When using the 802.11n frequency band, the user have an option to choose between a 20MHz or 20/40MHz bandwidth.
The Invisible option allows you to hide your wireless network. When this option is set to Visible, your wireless network name
is broadcasted to anyone within the range of your signal. If you are not using encryption then they could connect to your
network. When Invisible mode is enabled, you must enter the Wireless Network Name (SSID) on the client manually to connect
to the network.
Section 3 - Software Configuration
By default the wireless security of this router will be disabled. In this
next option the user can enabled or disable wireless security for the
frequency band 2.4GHz. There are two types of encryption that can be
used- WEP or WPA/WPA2.
Wireless Security Mode: WEP
Wired Equivalent Privacy (WEP) is the most basic form of encryption
that can be used for wireless networks. Even though it is known as a
‘weak’ security method, it is better than no security at all. Older wireless
adapter sometimes only supports WEP encryption and thus we still find
this encryption method used today.
WEP Key Length: Here the user can specify to either use a 64Bit or a
128Bit encrypted key.
Authentication: Authentication is a process by which the router
verifies the identity of a network device that is
attempting to join the wireless network. There
are two types authentication for this device when
using WEP. Open System allows all wireless devices
to communicate with the router before they are
required to provide the encryption key needed to
gain access to the network. Shared Key requires
any wireless device attempting to communicate
with the router to provide the encryption key
needed to access the network before they are
allowed to communicate with the router.
WEP Key 1: Enter the WEP key used here. For 64-bit keys you must enter 10 hex digits into each key box. For 128-bit keys you must enter
26 hex digits into each key box. A hex digit is either a number from 0 to 9 or a letter from A to F. You may also enter any text
string into a WEP key box, in which case it will be converted into a hexadecimal key using the ASCII values of the characters.
A maximum of 5 text characters can be entered for 64-bit keys, and a maximum of 13 characters for 128-bit keys.
Section 3 - Software Configuration
Wireless Security Mode: WPA-Personal
Wi-Fi Protected Access (WPA) is the most advanced and up to date
wireless encryption method used today. This is the recommended
wireless security option. WPA supports two authentication frameworks.
Personal (PSK) and Enterprise (EAP). Personal requires only the use of a
pass-phrase (Shared Secret) for security.
The following parameters will be available for configuration:
WPA Mode: WPA is the older standard; select this option if
the clients that will be used with the router only
support the older standard. WPA2 is the newer
implementation of the stronger IEEE 802.11i
security standard. With the “WPA2” option, the
router tries WPA2 first, but falls back to WPA if the
client only supports WPA. With the “WPA2 Only”
option, the router associates only with clients that
also support WPA2 security.
Cipher Type: Select the appropriate cipher type to use here.
Options to choose from are Temporal Key Integrity
Protocol (TKIP), Advanced Encryption Standard
(AES), and Both (TKIP and AES).
Group Key Enter the amount of time before the group key
Update Interval: used for broadcast and multicast data is changed.
Pre-Shared Key: Enter the shared secret used here. This secret
phrase needs to be the same on all of the wireless
clients for them to be able to connect to the
wireless network successfully.
Section 3 - Software Configuration
Wireless Security Mode: WPA-Enterprise
Wi-Fi Protected Access (WPA) is the most advanced and up to date
wireless encryption method used today. This is the recommended
wireless security option. WPA supports two authentication frameworks.
Personal (PSK) and Enterprise (EAP). Personal requires only the use of a
pass-phrase (Shared Secret) for security.
WPA Mode: WPA is the older standard; select this option if
the clients that will be used with the router only
support the older standard. WPA2 is the newer
implementation of the stronger IEEE 802.11i
security standard. With the “WPA2” option, the
router tries WPA2 first, but falls back to WPA if the
client only supports WPA. With the “WPA2 Only”
option, the router associates only with clients that
also support WPA2 security.
Cipher Type: Select the appropriate cipher type to use here.
Options to choose from are Temporal Key Integrity
Protocol (TKIP), Advanced Encryption Standard
(AES), and Both (TKIP and AES).
Group Key Enter the amount of time before the group key
Update Interval: used for broadcast and multicast data is changed.
RADIUS Server IP When the user chooses to use the EAP
Address: authentication framework, the RADIUS server’s IP
address can be entered here.
RADIUS Server When the user chooses to use the EAP
Port: authentication framework, the RADIUS server’s
port number can be entered here.
RADIUS Server Enter the shared secret used here. This secret
Shared Secret: phrase needs to be the same on all of the wireless
clients for them to be able to connect to the
wireless network successfully.
Section 3 - Software Configuration
Network Settings
On this page the user can configure the internal network settings of the router and also able to configure the built-in DHCP server to assign IP
addresses to computers on the network. The IP address that is configured here is the IP address that is used to access the Web-based management
interface. If you change the IP address in this section, you may need to adjust your PC’s network settings to access the network again.
Router IP Enter the IP address of the router. The default IP
Address: address is 192.168.0.1. If you change the IP address,
once you click Apply, you will need to enter the
new IP address in your browser to get back into
the configuration utility.
Default Subnet Enter the Subnet Mask. The default subnet mask is
Mask: 255.255.255.0.
Host Name: Enter a Host Name to identify this device.
Local Domain Enter the local domain name used here. (Optional).
Name:
Enable DNS Uncheck the box to transfer the DNS server
Relay: information from your ISP to your computers. If
checked, your computers will use the router for a
DNS server.
DHCP Server Settings
DHCP stands for Dynamic Host Control Protocol. This device has a built-in DHCP server. The DHCP Server will automatically assign an IP address
to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP
Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the router. The
DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting
and ending address of the IP address pool.
Section 3 - Software Configuration
The following parameters will be available for configuration:
Enable DHCP Check this box to enable the DHCP server on your
Server: router. Uncheck to disable this function.
DHCP IP Address Enter the starting and ending IP addresses for the
Range: DHCP server’s IP assignment.
DHCP Lease The length of time for the IP address lease. Enter
Time: the Lease time in minutes.
Always If all the computers on the LAN successfully obtain
Broadcast: their IP addresses from the router’s DHCP server
as expected, this option can remain disabled.
However, if one of the computers on the LAN
fails to obtain an IP address from the router’s
DHCP server, it may have an old DHCP client that
incorrectly turns off the broadcast flag of DHCP
packets. Enabling this option will cause the router
to always broadcast its responses to all clients,
thereby working around the problem, at the cost
of increased broadcast traffic on the LAN.
NetBIOS Check this box to allow the DHCP Server to offer
announcement: NetBIOS configuration settings to the LAN hosts.
NetBIOS allow LAN hosts to discover all other
computers within the network, e.g. within Network
Neighborhood.
Learn NetBIOS If NetBIOS announcement is switched on, it will cause WINS information to be learned from the WAN side, if available. Turn
from WAN: this setting off to configure manually.
NetBIOS Scope: This is an advanced setting and is normally left blank. This allows the configuration of a NetBIOS ‘domain’ name under which
network hosts operate. This setting has no effect if the ‘Learn NetBIOS information from WAN’ is activated.
Section 3 - Software Configuration
NetBIOS node This field indicates how network hosts are to perform NetBIOS name registration and discovery. H-Node, this indicates a Hybridtype: State of operation. First WINS servers are tried, if any, followed by local network broadcast. This is generally the preferred mode
if you have configured WINS servers. M-Node (default), this indicates a Mixed-Mode of operation. First Broadcast operation
is performed to register hosts and discover other hosts, if broadcast operation fails, WINS servers are tried, if any. This mode
favours broadcast operation which may be preferred if WINS servers are reachable by a slow network link and the majority
of network services such as servers and printers are local to the LAN. P-Node, this indicates to use WINS servers ONLY. This
setting is useful to force all NetBIOS operation to the configured WINS servers. You must have configured at least the primary
WINS server IP to point to a working WINS server. B-Node, this indicates to use local network broadcast ONLY. This setting is
useful where there are no WINS servers available, however, it is preferred you try M-Node operation first. This setting has no
effect if the ‘Learn NetBIOS information from WAN’ is activated.
Primary WINS
Server IP
address:
Secondary
WINS Server IP
address:
Configure the IP address of the preferred WINS server. WINS Servers store information regarding network hosts, allowing
hosts to ‘register’ themselves as well as discover other available hosts, e.g. for use in Network Neighborhood. This setting has
no effect if the ‘Learn NetBIOS information from WAN’ is activated.
Configure the IP address of the backup WINS server, if any. This setting has no effect if the ‘Learn NetBIOS information from
WAN’ is activated.
Section 3 - Software Configuration
Add/Edit DHCP Reservation
This option lets you reserve IP addresses, and assign the same IP address to the network device with the specified MAC address any time it requests
an IP address. This is almost the same as when a device has a static IP address except that the device must still request an IP address from the D-Link
router. The D-Link router will provide the device the same IP address every time. DHCP Reservations are helpful for server computers on the local
network that are hosting applications such as Web and FTP. Servers on your network should either use a static IP address or use this option.
The following parameters will be available for configuration:
Enable: Check this box to enable the reservation.
Computer Name: Enter the computer name. Alternatively, select a
computer that currently has a DHCP lease from
the drop down menu and click << to automatically
populate the Computer Name, IP Address, and
MAC Address fields.
IP Address: Enter the IP address you want to assign to the
computer or device. This IP Address must be
within the DHCP IP Address Range.
MAC Address: Enter the MAC address of the computer or device.
DHCP Reservations List
This shows clients that you have specified to have reserved DHCP
addresses. An entry can be changed by clicking the Edit icon, or deleted
by clicking the Delete icon. When you click the Edit icon, the item is
highlighted, and the ‘Edit DHCP Reservation’ section is activated for
editing.
Number of Dynamic DHCP Clients
In this section you can see what LAN devices are currently leasing IP
addresses.
Section 3 - Software Configuration
IPv6
On this page, the user can configure the IPv6 Connection type. There are two ways to set up the IPv6 Internet connection. You can use the Webbased IPv6 Internet Connection Setup Wizard, or you can manually configure the connection.
IPv6 Internet Connection Setup Wizard
For the beginner user that have not configured a router before, click
on the IPv6 Internet Connection Setup Wizard button and the router
will guide you through a few simple steps to get your network up and
running.
After clicking on the IPv6 Internet Connection Setup Wizard button, this
page will appear.
Welcome to the D-Link IPv6 Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to configure
your new D-Link router and connect to the IPv6 Internet.
Click Next to continue to the next page. Click Cancel to discard the
changes made and return to the main page.
Section 3 - Software Configuration
Step 1: Configure Your IPv6 Internet Connection
The router will try and detect whether its possible to obtain the IPv6
Internet Connection type automatically. If this succeeds then the user
will be guided through the input of the appropriate parameters for the
connection type found.
However, if the automatic detection fails, the user will be prompt to
either Try again or to click on the Guide me through the IPv6 settings
button to initiate the manual continual of the wizard.
Section 3 - Software Configuration
Step 1: Configure Your IPv6 Internet Connection
There are several connection types to choose from. If you are unsure
of your connection method, please contact your IPv6 Internet Service
Provider.
Note: If using the PPPoE option, you will need to ensure that any PPPoE
client software on your computers has been removed or disabled. The 3
options available on this page is IPv6 over PPPoE, Static IPv6 address
and Route, and Tunneling Connection.
Choose the required IPv6 Internet Connection type and click on the
Next button to continue. Click on the Prev button to return to the
previous page. Click on the Cancel button to discard all the changes
made and return to the main page.
Set Username and Password Connection (PPPoE)
After selecting the IPv6 over PPPoE option, the user will be able to
configure the IPv6 Internet connection that requires a username and
password to get online. Most DSL modems use this type of connection.
The following parameters will be available for configuration:
PPPoE Session: Select the PPPoE Session value used here. This
option will state that this connection shares it’s
information with the already configured IPv6
PPPoE connection, or the user can create a new
PPPoE connection here.
User Name: Enter the PPPoE username used here. This
information is obtainable from the ISP.
Password: Enter the PPPoE password used here. This
information is obtainable from the ISP.
Verify Password: Re-enter the PPPoE password used here.
Service Name: Enter the service name for this connection here. This option is optional.
Click on the Next button to continue. Click on the Prev button to return to the previous page.
Click on the Cancel button to discard all the changes made and return to the main page.
Section 3 - Software Configuration
Set Static IPv6 Address Connection
This mode is used when your ISP provides you with a set IPv6 addresses that does not change. The IPv6 information is manually entered in your
IPv6 configuration settings. You must enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary DNS Server, and Secondary DNS
Server. Your ISP provides you with all this information.
Use Link-Local The Link-local address is used by nodes and
Address: routers when communicating with neighboring
nodes on the same link. This mode enables IPv6capable devices to communicate with each other
on the LAN side.
IPv6 Address: Enter the WAN IPv6 address for the router here.
Subnet Prefix Enter the WAN subnet prefix length value used
Length: here.
Default Gateway Enter the WAN default gateway IPv6 address used
here.
Primary IPv6
DNS Address: Enter the WAN primary DNS Server address used
here.
Secondary IPv6
DNS Address: Enter the WAN secondary DNS Server address used here.
LAN IPv6 These are the settings of the LAN (Local Area Network) IPv6 interface for the router. The router’s LAN IPv6 Address configuration
Address: is based on the IPv6 Address and Subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.)
Click on the Next button to continue. Click on the Prev button to return to the previous page.
Click on the Cancel button to discard all the changes made and return to the main page.
Section 3 - Software Configuration
Tunneling Connection (6rd)
After selecting the Tunneling Connection (6rd) option, the user can
configure the IPv6 6rd connection settings.
The following parameters will be available for configuration:
6rd IPv6 Prefix: Enter the 6rd IPv6 address and prefix value used
here.
IPv4 Address: Enter the IPv4 address used here.
Mask Length: Enter the IPv4 mask length used here.
Assigned IPv6 Displays the IPv6 assigned prefix value here.
Prefix:
6rd Border Relay Enter the 6rd border relay IPv4 address used here.
IPv4 Address:
IPv6 DNS Server: Enter the primary DNS Server address used here.
Click on the Next button to continue. Click on the Prev button to return to the previous page.
Click on the Cancel button to discard all the changes made and return to the main page.
Setup Complete
The IPv6 Internet Connection Setup Wizard was completed.
Click on the Connect button to continue. Click on the Prev button to
return to the previous page. Click on the Cancel button to discard all
the changes made and return to the main page.
Section 3 - Software Configuration
Manual IPv6 Internet Connection Option
For the advanced user that have configured a router before, click on
the Manual IPv6 Internet Connection Setup button to input all the
settings manually.
On this page the user can manually configure the mode that the
Router will use to access an IPv6 Internet connection. There are several
connection types to choose from: Link-local, Static IPv6, DHCPv6,
Stateless Auto-Configuration, PPPoE, IPv6 over IPv4 Tunnel and 6to4.
If you are unsure of your connection method, please contact your IPv6
ISP.
IPv6 Connection Type: Auto Detection
In the following section we’ll discuss the parameters that can be
configured when setting up an Auto Detection (Stateless/DHCPv6)
connection. This is a method of connection where the ISP assigns your
IPv6 address when your router requests one from the ISP’s server. Some
ISP’s require you to make some settings on your side before your router
can connect to the IPv6 Internet.
Obtain IPv6
DNS Server
automatically:
Use the
following IPv6
DNS Servers:
Primary DNS:
Secondary DNS:
Select this option to obtain the DNS Server
addresses automatically.
Select this option to manually enter the DNS
Server addresses used.
Enter the primary DNS Server address used here.
Enter the secondary DNS Server address used
here.
Section 3 - Software Configuration
Use the section to configure the internal network settings of your router. The LAN IPv6 Link-Local Address is the IPv6 Address that you use to access
the Web-based management interface. If you change the LAN IPv6 Address here, you may need to adjust your PC’s network settings to access the
network again. DHCP-PD can be used to acquire a IPv6 prefix for the LAN interface.
Enable DHCPPD:
LAN IPv6
Address:
LAN IPv6 LinkLocal Address:
Select this option to enable DHCP PD.
Enter the LAN IPv6 address used here. This address
must be in the ‘/64’ subnet.
Displays the LAN IPv6 Link-Local address used
here.
The following parameters will be available for configuration:
Enable Automatic The user can tick this option to enable the autoIPv6 address: configuration feature.
Enable Automatic Tick this option to enable the automatic DHCP-PD
DHCP-PD in LAN: on the LAN.
Autoconfiguration
Autoconfiguration The user can select the auto-configuration type
Type: used here.
Router This option is only available when the autoAdvertisement configuration type is set to Stateless. Enter the
Lifetime: router advertisement lifetime value used here.
Section 3 - Software Configuration
IPv6 Address This option is only available when the autoRange (Start): configuration type is set to Stateful. Enter the
start IPv6 Address for the DHCPv6 range for your
local computers.
IPv6 Address This option is only available when the autoRange (End): configuration type is set to Stateful. Enter the end
IPv6 Address for the DHCPv6 range for your local
computers.
IPv6 Address This option is only available when the autoLifetime: configuration type is set to Stateful. Enter the IPv6
Address Lifetime (in minutes).
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
IPv6 Connection Type: Static IPv6
In the following section we’ll discuss the parameters that can be configured when setting up an Static IPv6 connection. This mode is used when
your ISP provides you with a set IPv6 addresses that does not change. The IPv6 information is manually entered in your IPv6 configuration settings.
You must enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary DNS Server, and Secondary DNS Server. Your ISP provides
you with all this information.
The following parameters will be available for configuration:
Use Link-Local The Link-local address is used by nodes and
Address: routers when communicating with neighboring
nodes on the same link. This mode enables IPv6capable devices to communicate with each other
on the LAN side.
IPv6 Address: Enter the WAN IPv6 address for the router here.
Subnet Prefix
Length:
Default Enter the WAN default gateway IPv6 address used
Gateway: here.
Primary DNS Enter the WAN primary DNS Server address used
Server: here.
Secondary DNS Enter the WAN secondary DNS Server address used
Servers: here.
Section 3 - Software Configuration
The following parameters will be available for configuration:
LAN IPv6 Enter the LAN (local) IPv6 address for the router
Address: here.
LAN IPv6 Link- Displays the Router’s LAN Link-Local Address here.
Local Address:
The following parameters will be available for configuration:
Enable Automatic The user can tick this option to enable the autoIPv6 address: configuration feature.
Autoconfiguration The user can select the auto-configuration type
Type: used here.
Router
Advertisement
Lifetime:
IPv6 Address
Range (Start):
IPv6 Address
Range (End):
IPv6 Address
Lifetime:
This option is only available when the autoconfiguration type is set to Stateless. Enter the
router advertisement lifetime value used here.
This option is only available when the autoconfiguration type is set to Stateful. Enter the
start IPv6 Address for the DHCPv6 range for
your local computers.
This option is only available when the autoconfiguration type is set to Stateful. Enter the
end IPv6 Address for the DHCPv6 range for your
local computers.
This option is only available when the autoconfiguration type is set to Stateful. Enter the
IPv6 Address Lifetime (in minutes).
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
IPv6 Connection Type: Autoconfiguration (SLAAC/DHCPv6)
In the following section we’ll discuss the parameters that can be configured when setting up an Autoconfiguration (SLAAC/DHCPv6) connection.
This is a method of connection where the ISP assigns your IPv6 address when your router requests one from the ISP’s server. Some ISP’s require you
to make some settings on your side before your router can connect to the IPv6 Internet.
The following parameters will be available for configuration:
Obtain IPv6 Select this option to obtain the DNS Server
DNS Servers addresses automatically.
automatically:
Use the Select this option to manually enter the DNS
following IPv6 Server addresses used.
DNS Servers:
Primary DNS
Server:
Secondary DNS
Server:
Enter the WAN primary DNS Server address used
here.
Enter the WAN secondary DNS Server address
used here.
Enable DHCP-PD: Select this option to enable DHCP PD.
LAN IPv6 Address: Enter the LAN IPv6 address used here. This address
must be in the ‘/64’ subnet.
LAN IPv6 LinkLocal Address: Displays the LAN IPv6 Link-Local address used
here.
Section 3 - Software Configuration
The following parameters will be available for configuration:
Enable Automatic The user can tick this option to enable the autoIPv6 address: configuration feature.
Enable Automatic Tick this option to enable the automatic DHCPDHCP-PD in LAN: PD on the LAN.
Autoconfiguration The user can select the auto-configuration type
Type: used here.
Router This option is only available when the autoAdvertisement configuration type is set to Stateless. Enter the
Lifetime: router advertisement lifetime value used here.
IPv6 Address This option is only available when the autoRange (Start): configuration type is set to Stateful. Enter the
start IPv6 Address for the DHCPv6 range for your
local computers.
IPv6 Address This option is only available when the autoRange (End): configuration type is set to Stateful. Enter the
end IPv6 Address for the DHCPv6 range for your
local computers.
IPv6 Address This option is only available when the autoLifetime: configuration type is set to Stateful. Enter the
IPv6 Address Lifetime (in minutes).
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
IPv6 Connection Type: PPPoE
Select this option if your ISP requires you to use a PPPoE (Point to Point Protocol over Ethernet) connection to IPv6 Internet. DSL providers typically
use this option. This method of connection requires you to enter a Username and Password (provided by your Internet Service Provider) to gain
access to the IPv6 Internet. The supported authentication protocols are PAP and CHAP.
The following parameters will be available for configuration:
PPPoE Session: Select the PPPoE Session value used here. This
option will state that this connection shares it’s
information with the already configured IPv6
PPPoE connection, or the user can create a new
PPPoE connection here.
Address Mode: Select the appropriate address mode used here.
Select Dynamic IP if the ISP’s servers assign the
router’s WAN IPv6 address upon establishing a
connection. If your ISP has assigned a fixed IPv6
address, select Static IP. The ISP provides the value
for the IPv6 Address.
IP Address: Enter the ISP PPPoE IP address in here.
Username: Enter the PPPoE username used here. This information is obtainable from the ISP.
Password: Enter the PPPoE password used here. This information is obtainable from the ISP.
Verify Password: Re-enter the PPPoE password used here.
Service Name: Enter the service name for this connection here. This option is optional.
MTU: Enter the MTU value used here. The default value is 1492.
Section 3 - Software Configuration
The following parameters will be available for configuration:
Obtain IPv6: Select this option to obtain the DNS Server
addresses automatically.
Use IPv6: Select this option to manually enter the DNS
Server addresses used.
Primary DNS: Enter the primary DNS Server address used here.
Secondary DNS: Enter the secondary DNS Server address used
here.
The following parameters will be available for configuration:
Enable DHCP- Select this option to enable DHCP PD.
PD:
LAN IPv6 Enter the LAN IPv6 address used here. This address
Address: must be in the ‘/64’ subnet.
LAN IPv6 Link- Displays the LAN IPv6 Link-Local address used
Local Address: here.
Section 3 - Software Configuration
The following parameters will be available for configuration:
Enable Automatic The user can tick this option to enable the
IPv6 address: auto-configuration feature.
Enable Automatic Tick this option to enable the automatic DHCPDHCP-PD in LAN: PD on the LAN.
Autoconfiguration The user can select the auto-configuration
Type: type used here.
Router This option is only available when the autoAdvertisement configuration type is set to Stateless. Enter the
Lifetime: router advertisement lifetime value used here.
IPv6 Address Range This option is only available when the auto(Start): configuration type is set to Stateful. Enter the
start IPv6 Address for the DHCPv6 range for
your local computers.
IPv6 Address Range This option is only available when the auto(End): configuration type is set to Stateful. Enter the
end IPv6 Address for the DHCPv6 range for
your local computers.
IPv6 Address This option is only available when the autoLifetime: configuration type is set to Stateful. Enter the
IPv6 Address Lifetime (in minutes).
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
IPv6 Connection Type: IPv6 in IPv4 Tunnel
In section to the user can configure the IPv6 connection to run in IPv4
Tunnel mode. IPv6 over IPv4 tunneling encapsulates IPv6 packets in
IPv4 packets so that IPv6 packets can be sent over an IPv4 infrastructure.
The following parameters will be available for configuration:
Remote IPv4 Enter the remote IPv4 address used here.
Address:
Remote IPv6 Enter the remote IPv6 address used here.
Address:
Local IPv4 Enter the local IPv4 address used here.
Address:
Local IPv6 Enter the local IPv6 address used here.
Address:
Subnet Prefix Enter the Subnet prefix length value used here.
Length:
The following parameters will be available for configuration:
Obtain IPv6 Select this option to obtain the DNS Server
DNS Servers addresses automatically.
automatically:
Use the Select this option to manually enter the DNS
following IPv6 Server addresses used.
DNS Servers:
Primary DNS Enter the WAN primary DNS Server address used here.
Server:
Secondary DNS Enter the WAN secondary DNS Server address used here.
Server:
Section 3 - Software Configuration
The following parameters will be available for configuration:
Enable DHCP- Select this option to enable DHCP PD.
PD:
LAN IPv6 Enter the LAN IPv6 address used here. This address
Address: must be in the ‘/64’ subnet.
LAN IPv6 Link- Displays the LAN IPv6 Link-Local address used
Local Address: here.
The following parameters will be available for configuration:
Enable Automatic The user can tick this option to enable the autoIPv6 address: configuration feature.
Enable Automatic Tick this option to enable the automatic DHCPDHCP-PD in LAN: PD on the LAN.
Autoconfiguration The user can select the auto-configuration type
Type: used here.
Router This option is only available when the autoAdvertisement configuration type is set to Stateless. Enter the
Lifetime: router advertisement lifetime value used here.
IPv6 Address This option is only available when the autoRange (Start): configuration type is set to Stateful. Enter the
start IPv6 Address for the DHCPv6 range for your
local computers.
IPv6 Address This option is only available when the autoRange (End): configuration type is set to Stateful. Enter the
end IPv6 Address for the DHCPv6 range for your
local computers.
IPv6 Address This option is only available when the autoLifetime: configuration type is set to Stateful. Enter the
IPv6 Address Lifetime (in minutes).
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
IPv6 Connection Type: 6to4
In this section the user can configure the IPv6 6to4 connection settings.
6to4 is an IPv6 address assignment and automatic tunneling technology
that used to provide unicast IPv6 connectivity between IPv6 sites and
hosts across the IPv4 Internet.
The following parameters will be available for configuration:
6to4 Address: Here the 6to4 configured address will be displayed.
6to4 Relay: Enter the 6to4 relay address used here.
Primary DNS Enter the primary DNS Server address used here.
Server:
Secondary DNS Enter the secondary DNS Server address used
Server: here.
The following parameters will be available for configuration:
LAN IPv6 Enter the LAN IPv6 address used here. This address
Address: must be in the ‘/64’ subnet.
LAN IPv6 Link- Displays the LAN IPv6 Link-Local address used
Local Address: here.
Enable Automatic The user can tick this option to enable the autoIPv6 address configuration feature.
Autoconfiguration The user can select the auto-configuration type
Type: used here.
Router This option is only available when the autoAdvertisement configuration type is set to Stateless. Enter the
Lifetime: router advertisement lifetime value used here
Section 3 - Software Configuration
The following parameters will be available for configuration:
Enable Automatic The user can tick this option to enable the autoIPv6 address: configuration feature.
Autoconfiguration The user can select the auto-configuration type
Type: used here.
IPv6 Address This option is only available when the autoRange (Start): configuration type is set to Stateful. Enter the
start IPv6 Address for the DHCPv6 range for your
local computers.
IPv6 Address This option is only available when the autoRange (End): configuration type is set to Stateful. Enter the
end IPv6 Address for the DHCPv6 range for your
local computers.
IPv6 Address This option is only available when the autoLifetime: configuration type is set to Stateful. Enter the
IPv6 Address Lifetime (in minutes).
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
IPv6 Connection Type: 6rd
In this section the user can configure the IPv6 6rd connection settings.
The following parameters will be available for configuration:
6rd Select the desired 6rd configuration option here.
Configuration:
6rd IPv6 Prefix: Enter the 6rd IPv6 address and prefix value used
here.
IPv4 Address: Enter the IPv4 address used here.
Mask Length: Enter the IPv4 mask length used here.
Assigned IPv6 Displays the IPv6 assigned prefix value here.
Prefix:
6rd Border Relay Enter the 6rd border relay IPv4 address used here.
IPv4 Address:
Primary DNS Enter the primary DNS Server address used here.
Server
Secondary DNS Enter the secondary DNS Server address uses here.
Server:
The following parameters will be available for configuration:
LAN IPv6 Enter the LAN IPv6 address used here. This address
Address: must be in the ‘/64’ subnet.
LAN IPv6 Link- Displays the LAN IPv6 Link-Local address used
Local Address: here.
Section 3 - Software Configuration
The following parameters will be available for configuration:
Enable Automatic The user can tick this option to enable the autoIPv6 address: configuration feature.
Autoconfiguration The user can select the auto-configuration type
Type: used here.
Router This option is only available when the autoAdvertisement configuration type is set to Stateless. Enter the
Lifetime: router advertisement lifetime value used here.
IPv6 Address This option is only available when the autoRange (Start): configuration type is set to Stateful. Enter the
start IPv6 Address for the DHCPv6 range for
your local computers.
IPv6 Address This option is only available when the autoRange (End): configuration type is set to Stateful. Enter the
end IPv6 Address for the DHCPv6 range for your
local computers.
IPv6 Address This option is only available when the autoLifetime: configuration type is set to Stateful. Enter the
IPv6 Address Lifetime (in minutes).
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
IPv6 Connection Type: Local Connection Only
The Link-local address is used by nodes and routers when communicating
with neighboring nodes on the same link. This mode enables IPv6capable devices to communicate with each other on the LAN side.
The following parameters will be available for configuration:
LAN IPv6 Link- Displays the LAN IPv6 Link-Local address used
Local Address: here.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
Advanced Category
This section allows the user to configure the more advanced features that can be done by this router. Features like Port Forwarding, Firewall
settings, Quality of Service settings and more.
Section 3 - Software Configuration
Virtual Server
This router can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically
redirected to local servers in the LAN (Local Area Network). The router’s firewall feature filters out unrecognized packets to protect the LAN network
so all computers networked with the router are invisible to the outside world. The user can make some of the LAN computers accessible from the
Internet by enabling Virtual Server.
Depending on the requested service, the router redirects the external
service request to the appropriate server within the LAN network. The
router is also capable of port-redirection, meaning that incoming traffic
to a particular port may be redirected to a different port on the server
computer.
Checkbox: Check the box on the left side to enable the Virtual
Server rule.
Name: Enter a name for the rule or select an application
from the drop-down menu. Select an application
and click << to populate the fields.
IP Address: Enter the IP address of the computer on your local
network that you want to allow the incoming
service to. If your computer is receiving an IP
address automatically from the router (DHCP),
you computer will be listed in the Computer Name
drop-down menu. Select your computer and click
<<.
Section 3 - Software Configuration
Port: Enter the port that you want to open next to Public Port and Private Port. The public and private ports are usually the same.
The public port is the port seen from the Internet side, and the private port is the port being used by the application on the
computer within your local network.
Traffic Type: Select TCP, UDP, or All from the Protocol drop-down menu.
Schedule: Use the drop-down menu to schedule the time that the Virtual Server Rule will be enabled. The schedule may be set to
Always, which will allow the particular service to always be enabled. You can create your own times in the Schedules page.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
Port Forwarding
The Port Forwarding option gives Internet users access to services on your LAN. This feature is useful for hosting online services such as FTP, Web or
game servers. For each entry, you define a public port on your router for redirection to an internal LAN IP Address and LAN port. This option is used
to open multiple ports or a range of ports in your router and redirect data through those ports to a single PC on your network. This feature allows
you to enter ports in the format, Port Ranges (100-150), Individual Ports (80, 68, 888), or Mixed (1020-5000, 689). This option is only applicable to
the INTERNET session.
The following parameters will be available for configuration:
Checkbox: Tick the checkbox on the left side to enable the
Port Forwarding rule.
Name: Enter a name for the rule or select an application
from the drop-down menu. Select an application
and click << to populate the fields.
IP Address: Enter the IP address of the computer on your local
network that you want to allow the incoming
service to. If your computer is receiving an IP
address automatically from the router (DHCP),
you computer will be listed in the Computer Name
drop-down menu. Select your computer and click
<<.
Ports to Open: Enter the external port number in the appropriate space provided. If the port number is TCP then enter the number in the TCP
space, and if the port number is UDP than enter it in the UDP space.
Schedule: Use the drop-down menu to schedule the time that the Port Forwarding rule will be enabled. The schedule may be set to
Always, which will allow the particular service to always be enabled. You can create your own times in the Schedules page.
Inbound Filter: Select the inbound filter rule here. Options to choose from are Allow All, Deny All, and any other custom rule created.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
Application Rules
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications
have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the router.
If you need to run applications that require multiple connections, specify the port normally associated with an application in the “Trigger Port”
field, select the protocol type as TCP or UDP, then enter the firewall (public) ports associated with the trigger port to open them for inbound traffic.
The following parameters will be available for configuration:
Checkbox: Check the box on the left side to enable the
Application Rule.
Name: Enter a name for the rule. You may select a
predefined application from the Application
drop-down menu and click <<.
Application: Displays a list of predefined application to use in
the rules.
Port (Trigger): This is the port used to trigger the application. It
can be either a single port or a range of ports.
Port (Firewall): This is the port number on the Internet side that
will be used to access the application. You may
define a single port or a range of ports. You can
use a comma to add multiple ports or port ranges.
Traffic Type: Select the protocol of the firewall port (TCP, UDP, or All).
Schedule: The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the
particular service to always be enabled. You can create your own times in the Schedules page.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
QoS Engine
The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are
disabled and application priority is not classified automatically. The QoS section contains a queuing mechanism, traffic shaping and classification.
It supports two kinds of queuing mechanisms. Strict Priority Queue (SPQ) and Weighted Fair Queue (WFQ). SPQ will process traffic based on
traffic priority. Queue1 has the highest priority and Queue4 has the lowest priority. WFQ will process traffic based on the queue weight. Users can
configure each queue’s weight. The sum of all the queue’s weight must be 100. When surfing the Internet, the system will do traffic shaping based
on the uplink and downlink speed. The classification rules can be used to classify traffic to different queues, then SPQ or WFQ will do QoS based on
the queue’s priority or weight.
Enable QoS: This option is disabled by default. Enable this
option for better performance and experience with
online games and other interactive applications,
such as VoIP.
Uplink Speed: The speed at which data can be transferred from
the router to your ISP. This is determined by your
ISP. ISP’s often define speed as a download/upload
pair. For example, 1.5Mbits/284Kbits. Using this
example, you would enter 284. Alternatively you
can test your uplink speed with a service such as
www.dslreports.com.
Downlink Speed: The speed at which data can be transferred from
the ISP to the router. This is determined by your
ISP. ISP’s often define speed as a download/upload
pair. For example, 1.5Mbits/284Kbits.
Queue Type:
Queue ID:
Queue Priority:
Queue Weight:
Using this example, you would enter 1500. Alternatively you can test your downlink speed with a service such as www.
dslreports.com.
Here the user can specify the queue type used. When choosing the option Strict Priority Queue, the router will apply QoS
based on the internal specification for the queue ID’s listed. When choosing the option Weight Fair Queue, the router will
apply QoS based on the user defined percentage in the Queue Weight column.
In this column the Queue ID used will be displayed.
In this column the Queue Priority used will be displayed.
After choosing to use the Weight Fair Queue option, under Queue Type, the user will be able to manual enter the Queue
Weight for each individual Queue ID.
Section 3 - Software Configuration
After specifying the QoS framework used, in the QoS setup section, the user can now create individual rules for scenarios that require the use of
traffic control and data priority manipulation.
The following parameters will be available for configuration:
Checkbox: Tick this option to enable the rule specified.
Name: Enter a custom name for the rule being created
here. This name is used for identification.
Queue ID: Select the appropriate priority requirement from
the drop-down menu that will be applied to this
rule. Option to choose from are Highest, Higher,
Normal, and Best Effort.
Protocol: Select the protocol used for the application for
in the drop-down menu and it will automatically
place it in the Protocol field.
Local IP Range: Enter the local IP range used here. This is the IP
range of you Local Area Network. The Router’s IP
cannot be included in this range.
Remote IP Enter the remote IP range used here. This is the
Range: IP range of the public network from the Internet
Port side. To apply this rule to any IP addresses
from the public side, enter the range 0.0.0.1 to
255.255.255.254.
Application Port: Enter the application port number used here.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
Network Filter
The MAC (Media Access Controller) Address filter option is used to control network access based on the MAC Address of the network adapter. A
MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be configured to ALLOW or DENY network/
Internet access.
In the MAC Filtering Rules section, the user can create and edit Network filter rules. This maximum amount of rules that can be created are 24 rules.
The following parameters will be available for configuration:
Configure MAC Select Turn MAC Filtering OFF, Turn MAC Filtering
Filtering below: ON and ALLOW computers listed to access the
network, or Turn MAC Filtering ON and DENY
computers listed to access the network from the
drop-down menu.
Checkbox: Check the box on the left side to enable the
Network Filter.
MAC Address: Enter the MAC address you would like to use in
this filtering rule.
DHCP Client List: Select a DHCP client from the Computer Name
drop-down menu and click << to copy that MAC
Address.
Schedule: The schedule of time when the Network Filter will
be enabled. The schedule may be set to Always,
which will allow the particular service to always be
enabled. Click the New Schedule button to create
your own times in the Schedules page.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
Access Control
The Access Control option allows you to control access in and out of your network. Use this feature as Access Controls to only grant access to
approved sites, limit web access based on time or dates, and/or block internet access for applications like P2P utilities or games.
The following parameters will be available for configuration:
Enable Access Tick this option to enable the Access Control
Control: feature.
Add Policy: Click on this button to add a new Access Control
Policy.
After clicking on the Add Policy button, the add policy wizard will guide
you through the step-by-step process in adding a new policy. The first
window explains the process.
Throughout this wizard the user will be able to:
Click on the Prev button to return to the previous window.
Click on the Next button to continue to the next window.
Click on the Cancel button to discard the changes made and return to
the main Access Control window.
Step 1: In the first step, the user can enter the policy name used.
The following parameters will be available for configuration:
Policy Name: Enter the new policy name used for this rule here.
Section 3 - Software Configuration
Step 2: In the second step, the user can configure the schedule settings
for this rule.
The following parameters will be available for configuration:
Details: Select the appropriate predefined schedule rule
to apply to this rule from the drop-down menu.
Step 3: In the third step, the user can configure the address type and IP
address of the machines used in this rule.
The following parameters will be available for configuration:
Address Type: Specify a machine with its IP or MAC address, or
select ‘Other Machines’ for machines that do not
have a policy.
IP Address: After selecting the IP address type, the user can
enter the IP address of the machines used in
this rule here. Alternatively, the user can select a
Computer from the Computer Name list.
Machine After selecting the MAC address type, the user
Address: can enter the MAC address of the machine used in
this rule here. Alternatively, the used can select a
Computer from the Computer Name list.
Add: Click on this button to add the machine to the list.
Update: After clicking the
option, the user will be able to update the machine information.
Delete: If the user chooses to remove a machine from the list, click on the
icon.
Step 4: In the fourth step, the user can select the filtering method used
for this rule.
The following parameters will be available for configuration:
Method: Here the user can select the filtering method used.
Options to choose from are ‘Log Web Access Only’,
‘Block All Access’, and ‘Block Some Access’.
Section 3 - Software Configuration
The following parameters will be available for configuration:
Apply Web Filter: After selecting the ‘Block Some Access’ option,
the user will be able to select this option. Selecting
this option will allow the web filter access control
feature to be applied to this rule.
Apply Advanced After selecting the ‘Block Some Access’ option,
Port Filters: the user will be able to select this option. Selecting
this option will allow the advanced port filters
access control feature to be applied to this rule.
Click on the Save button to accept the changes made and return to the
main Access Control window.
In the Policy Table section a list on access control rules will be displayed.
To edit a specific rule, click on the
icon.
icon.
To remove a specific rule, click on the
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
Website Filter
Website Filters are used to allow you to set up a list of Web sites that can be viewed by multiple users through the network.
Website Filter is used to allow or deny computers on your network from
accessing specific web sites by keywords or specific Domain Names.
Select ‘ALLOW computers access to ONLY these sites’ in order only
allow computers on your network to access the specified URLs and
Domain Names. ‘DENY computers access to ONLY these sites’ in order
deny computers on your network to access the specified URLs and
Domain Names.
The following parameters will be available for configuration:
Website URL/ Enter the URL or Domain name that you want to
Domain: allow or block here.
An example of an URL is: http://www.facebook.
com/
An example of a domain name is: facebook.com
Click on the Clear the list below... button to remove all the entries from
the spaces in the list.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
Inbound Filter
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure inbound
data filtering rules that control data based on an IP address range. Inbound Filters can be used for limiting access to a server on your network to a
system or group of systems. Filter rules can be used with Virtual Server, Port Forwarding, or Remote Administration features. The user can add new
Inbound filter rule in the next section.
The following parameters will be available for configuration:
Name: The user can enter a custom name for the inbound
filter rule here.
Action: Select an action that will take place when this rule
is initiated. Options to choose from are Allow and
Deny.
Enable: Tick this option to enable the specified IP range
for this rule.
Remote IP Start: Enter the remote starting IP address here in the
range.
Remote IP End: Enter the remote ending IP address here in the
range.
Add: Click this button to add the new inbound filter
rule.
Cancel: Click this button to discard the new inbound filter
rule.
In the Inbound Filter Rules List section, the user can view a list of the
inbound filter rules already created. To edit a specific rule, click on the
icon. The delete a specific rule, click on the
icon.
Section 3 - Software Configuration
Firewall Settings
A firewall protects your network from the outside world. The router offers a firewall type functionality. The SPI feature helps prevent cyber attacks.
Sometimes you may want a computer exposed to the outside world for certain types of applications. If you choose to expose a computer, you can
enable DMZ. DMZ is short for Demilitarized Zone. This option will expose the chosen computer completely to the outside world.
The following parameters will be available for configuration:
Enable SPI: Check the Enable SPI box to enable the SPI (Stateful
Packet Inspection, also known as dynamic packet
filtering) feature. Enabling SPI helps to prevent
cyber attacks by tracking more state per session.
It validates that the traffic passing through the
session conforms to the protocol.
The following parameters will be available for configuration:
Enable anti- Tick this option to enable the anti-spoof checking
spoof checking: feature.
Section 3 - Software Configuration
Firewall rules can be used to allow or deny traffic passing through the router. You can specify a single port by utilizing the input box at the top or
a range of ports by utilizing both input boxes. DMZ means “Demilitarized Zone”. DMZ allows computers behind the router firewall to be accessible
to Internet traffic. Typically, your DMZ would contain Web servers, FTP servers and others.
The following parameters will be available for configuration:
Enable DMZ: Tick this option to enable the DMZ feature.
DMZ IP Address: Enter the IP address of the computer on the
LAN that you want to have unrestricted Internet
communication in the DMZ IP address field. To
specify an existing DHCP client, use the Computer
Name drop-down to select the computer that you
want to make a DMZ host. If selecting a computer
that is a DHCP client, be sure to make a static
reservation in the Setup > Network Settings page
so that the IP address of the DMZ machine does
not change.
The following parameters will be available for configuration:
PPTP: Tick this option to allow PPTP access to the LAN
network.
IPSec (VPN): Tick this option to allow IPSec (VPN) access to the
LAN network.
RSTP: Tick this option to allow RSTP access to the LAN
network.
SIP: Tick this option to allow SIP access to the LAN
network.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
Routing
The Routing option is an advanced method of customizing specific routes of data through your network.
In the Routing List section, the user can configure routing rules used by this router. The maximum amount of rules that can be configured is 32.
The following parameters will be available for configuration:
Checkbox: To enable a route, check the box that is on the left
side of the route.
Name: Enter a name for the rule used here.
Destination IP: Enter the IP address of the packets that will take
this route.
Netmask: Enter the netmask to specify the subnet of the IP
packets that will take this route.
Gateway: Enter the next hop that will be taken if this route
is used.
Metric: Enter the metric value that this route will use here.
Interface: Use the drop-down menu to specify if the IP packet must use the WAN or LAN interface to transit out of the Router.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
Advanced Wireless
These options are for users that wish to change the behavior of their 802.11n wireless radio from the standard settings. We do not recommend
changing these settings from the factory defaults. Incorrect settings may impact the performance of your wireless radio. The default settings
should provide the best wireless radio performance in most environments.
The following parameters will be available for configuration:
Wireless Band: Here the user can view the wireless frequency
band being configured. In the case 2.4GHz.
Transmit Power: This option sets the transmit power of the
antennas.
WLAN Partition: Check this box to enable WLAN Partition.
WMM Enable:
Short GI:
Check this box to enable the WMM feature.
Check this box to reduce the guard interval time
therefore increasing the data capacity.
However, it’s less reliable and may create higher
data loss.
HT 20/40
Coexistence:
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
Wi-Fi Protected Setup
Wi-Fi Protected Setup (WPS) System is a simplified method for securing your wireless network during the “Initial setup” as well as the “Add New
Device” processes. The Wi-Fi Alliance (WFA) has certified it across different products as well as manufactures. The process is just as easy, as depressing
a button for the Push-Button Method or correctly entering the 8-digit code for the Pin-Code Method. The time reduction in setup and ease of use
are quite beneficial, while the highest wireless Security setting of WPA2 is automatically used.
In the Wi-Fi Protected Setup section, the user can enable the WPS feature of this router.
The following parameters will be available for configuration:
Enable: Tick this option to enable the Wi-Fi Protected
Setup feature.
WiFi Protected This parameter displays the WPS setup status.
Setup:
Lock Wireless Tick this option to lock the configured wireless
Security security settings.
Settings:
In the PIN Settings section, the user not only will be able to view the PIN code, but will also be able to reset the PIN to default or to generate a
new PIN code. A PIN is a unique number that can be used to add the router to an existing network or to create a new network. The default PIN
may be printed on the bottom of the router. For extra security, a new PIN can be generated. You can restore the default PIN at any time. Only the
Administrator (“admin” account) can change or reset the PIN.
The following parameters will be available for configuration:
PIN: Shows the current value of the router’s PIN.
Reset PIN to Click this button to restore the default PIN of the
Default: router.
Generate New Click this button to create a random number that
PIN: is a valid PIN. This becomes the router’s PIN. You
can then copy this PIN to the user interface of the
registrar.
Click the ‘Connect your Wireless Device’ button to start Wireless
Connection Setup Wizard. This wizard helps you add wireless devices to
the wireless network.
Section 3 - Software Configuration
Step 1: In this step the user have two options to choose from. You
can choose Auto if the wireless client supports WPS, or Manual if the
wireless client does not support WPS.
Click on the Prev button to return to the previous page. Click on the
Next button to continue to the next page. Click on the Cancel button to
discard the changes made and return to the main wireless page.
Step 2: After selecting Auto, the following page will appear. There are
two ways to add a wireless device, that supports WPS. Firstly, there is the
Personal Identification Number (PIN) method. Using this method will
prompt the user to enter a PIN code. This PIN code should be identical
on the wireless client. Secondly, there is the Push Button Configuration
(PBC) method. Using this method will allow the wireless client to
connect to this device by similarly pressing the PBC button on it.
Click on the Prev button to return to the previous page. Click on the
Next button to continue to the next page. Click on the Cancel button to
discard the changes made and return to the main wireless page.
Step 2: After selecting Manual, the following page will appear. On this
page to user can view the wireless configuration of this router. The
wireless clients should configure their wireless settings to be identical
to the settings displayed on this page for a successful connection. This
option is for wireless clients that can’t use the WPS method to connect
to this device.
Click on the Prev button to return to the previous page. Click on the
Next button to continue to the next page. Click on the Cancel button to
discard the changes made and return to the main wireless page. Click
on the Wireless Status button to navigate to the Status > Wireless page
to view what wireless client are connected to this device.
Section 3 - Software Configuration
Advanced Network
This section contains settings which can change the way the router handles certain types of traffic. We recommend that you not change any of
these settings unless you are already familiar with them or have been instructed to change them by one of our support personnel.
UPnP
UPnP is short for Universal Plug and Play which is a networking architecture that provides compatibility among networking equipment, software,
and peripherals. The device is a UPnP enabled router, meaning it will work with other UPnP devices/software. If you do not want to use the UPnP
functionality, it can be disabled by selecting “Disabled”.
The following parameters will be available for configuration:
Enable UPnP: Tick this option to enable the UPnP feature of the
router.
WAN Ping
When you Enable WAN Ping response, you are causing the public WAN (Wide Area Network) IP address on the device to respond to ping commands
sent by Internet users. Pinging public WAN IP addresses is a common method used by hackers to test whether your WAN IP address is valid.
The following parameters will be available for configuration:
Enable WAN Tick this option to enable the WAN Ping Response
Ping Response: option of the router.
WAN Port Speed
This allows you to select the speed of the WAN interface of the router. Option to choose from are Auto 10/100/1000Mbps, 10Mbps, 100Mbps, or
1000Mbps.
The following parameters will be available for configuration:
WAN Port Speed: You may set the port speed of the Internet port
to Auto 10/100/1000Mbps, 10Mbps, 100Mbps,
or 1000Mbps. Some older cable or DSL modems
may require you to set the port speed to 10Mbps.
Section 3 - Software Configuration
Multicast Streams
This section enables the user to allow IPv4 or IPv6 Multicast traffic to pass from the Internet to your network more efficiently.
The following parameters will be available for configuration:
IPv4 Enable
Multicast
Streams
Enable IPv6
Multicast
Streams Enable this option if you are receiving video on
demand type of service from the Internet. The
Enable Multicast router uses the IGMP protocol to support efficient
Streams: multicasting transmission of identical content,
such as multimedia, from a source to a number
of recipients. This option must be enabled if any
applications on the LAN participate in a multicast
group. If you have a multimedia LAN application
that is not receiving content as expected, try
enabling this option.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
Tools Category
In this category the user will be able to configure features that are related to the router itself. Features like the time settings, login accounts,
firmware update and more.
Section 3 - Software Configuration
Admin
This page will allow you to change the Administrator password and configure the authentication settings. This window also allows you to enable
Remote Management, via the Internet. For security reasons, it is recommended that you change the password for the Admin and User accounts.
Be sure to write down the new password to avoid having to reset the router in case they are forgotten.
In the Admin Password section, the user can change the Administrator
login password used for this device.
The following parameters will be available for configuration:
Password: Enter the new login password used here.
Verify Password: Re-enter the new login password here.
In the User Password section, the user can change the User login
password used for this device.
The following parameters will be available for configuration:
Password: Enter the new login password used here.
Verify Password: Re-enter the new login password here.
In the System Name section, the user can change the gateway name
used for this device.
The following parameters will be available for configuration:
Gateway Name: Enter the router gateway name used here.
The following parameters will be available for configuration:
Enable Graphical Tick this option to enable the graphical image
Authentication: confirmation when the user login to the web
configuration.
Section 3 - Software Configuration
Enable Remote Tick this option to enable remote management.
Management: This option will enable the router to be accessible
from the Internet port.
Remote Admin Enter the remote administration port number used here. Sometimes services like an internal web server will occupy the port
Port: number 80. In this option the user can change the remote administration port to 8080 for example.
Remote Admin Select the appropriate remote admin inbound filter behavior here. Options to choose from are Allow All and Deny All.
Inbound Filter:
Details: Enter the remote admin inbound filter detail description used here.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
Time
The Time window allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the
time zone that you are in and set the Time Server. Daylight Saving can also be configured to automatically adjust the time when needed.
Time and Date Configuration
Here the user can configure the time zone as well as the daylight savings settings used for this router.
The following parameters will be available for configuration:
Time: Here will be displayed the current time
configuration running on this device.
Time Zone: Select the appropriate time zone used on this
device here.
Enable Daylight Check this box if the country your are located in
Saving: uses Daylight Saving time.
Daylight Saving Select the daylight savings offset used here.
Offset:
Daylight Saving Select the start date and end date for daylight
Dates: saving time.
Automatic Time and Date Configuration
Here the user can configure whether this router will automatically synchronize it’s time and date with a public time server.
The following parameters will be available for configuration:
Automatically NTP is short for Network Time Protocol. NTP
synchronize: synchronizes computer clock times in a network
of computers. Tick this option to enable automatic
time and date synchronizing.
NTP Server Used: Select the appropriate time server used here. The
interval at which the router will communicate with
the NTP server is set to 7 days.
Update Now: After selecting the appropriate time server and enabling the automatic synchronization option, click on this button to update
the current time and date of the router.
Section 3 - Software Configuration
Set the Time and Date Manually
Here the user can configure the time and date values, used by this router, manually. Here the user can also synchronize the router’s time with the
configuration computer’s time.
The following parameters will be available for configuration:
Set Manually: Here the user can manually configure the date and
time used by this device. Options to configure are
Year, Month, Day, Hour, Minute, and Second.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Syslog
The Syslog options allow you to send log information to a System Log
Server.
The following parameters will be available for configuration:
Enable Logging Tick this option to enable the Syslog feature.
To SysLog
Server:
Syslog Server IP Enter the Syslog Server IP address used here.
Address:
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
Email Settings
The Email feature can be used to send the system log files and router alert messages to your email address.
Email Notification
When this option is enabled, router activity logs or firmware upgrade
notifications can be emailed to a designated email address.
The following parameters will be available for configuration:
Enable Email Tick this option to enable the Email notification
Notification: feature.
Email Settings
Here this user can manually enter the email settings required to enable
the email notification feature.
The following parameters will be available for configuration:
From Email This email address will appear as the sender
Address: when you receive a log file or firmware upgrade
notification via email.
To Email Enter the email address where you want the email
Address: sent.
Email Subject: Enter the text that you want to appear in the
subject line of the e-mail that is sent.
SMTP Server Enter the SMTP server address for sending email. If your SMTP server requires authentication, select this option.
Address:
SMTP Server Enter the SMTP server port number used for sending email.
Port:
Enable Tick this option if the SMTP server requires authentication for sending mail.
Authentication:
Section 3 - Software Configuration
Account Name: Enter your account for sending email.
Password: Enter the password associated with the account.
Verify Password: Re-enter the password associated with the account here.
Send Mail Now: Click this button to send a test email from the Router to verify that the email settings have been configured correctly.
Email Log When Full or on Schedule
Normally emails are sent at the starting and ending time defined in the
schedule. However, rebooting the router during the schedule period
will cause additional emails to be sent.
The following parameters will be available for configuration:
On Log Full: Select this option if you want logs to be sent by
email when the log is full.
On Schedule: Select this option if you want logs to be sent by email according to a schedule.
Schedule: If you selected the ‘On Schedule’ option, select one of the defined schedule rules. If you do not see the schedule you need in
the list of schedules, go to the Tools > Schedules screen and create a new schedule.
Detail: Enter a detailed description here.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
System
This section allows you to manage the router’s configuration settings, reboot the router, and restore the router to the factory default settings.
Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created.
The following parameters will be available for configuration:
Save Settings To Use this option to save the current router
Local Hard Drive: configuration settings to a file on the hard disk of
the computer you are using. First, click the Save
button. A file dialog will appear, allowing you to
select a location and file name for the settings.
Load Settings Use this option to load previously saved router
From Local Hard configuration settings. First, use the Browse option
Drive: to find a previously saved file of configuration
settings. Then, click the Restore Configuration
From File button below to transfer those settings
to the router.
Restore To This option will restore all configuration settings
Factory Default back to the settings that were in effect at the
Settings: time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router configuration
settings, use the Save button above.
Reboot The Click to reboot the router.
Device:
Clear Language If you previously installed a language pack and want to revert all the menus on the Router interface back to the default
Pack: language settings, click the Clear button.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
Firmware
Use the Firmware window to upgrade the firmware of the Router and
install language packs. If you plan to install new firmware, make sure
the firmware you want to use is on the local hard drive of the computer.
If you want to install a new language pack, make sure that you have
the language pack available. Please check the support site for firmware
updates. You can download firmware upgrades to your hard drive from
the support site.
In the Firmware Information section the user can view the Current
Firmware Version number running on this device, the Current Firmware
Date of this same firmware version running on this device, and a button
to click that will Check Online Now for Latest Firmware Version.
In the Firmware Upgrade section the user can physically upgrade the
firmware of this device clicking on the Browse button and navigating
to the firmware file, saved on the local hard drive. After locating the file,
click on the Upload button to initiate the firmware upgrade.
Note: Some firmware upgrades will reset the configuration, of the
device, to factory defaults. Be sure to save the current configuration first
before any firmware update.
In the Language Pack Upgrade section, the user can change the router’s
language pack by clicking on the Browse button and navigating to the
language pack, downloaded to the computer. After navigating to the
language pack file, click on the Upload button to initiate the language
pack upload and configuration. Always keep a close lookout on the
local vendor’s website for new firmware upgrades and language packs.
Note: Always update the firmware or language packs for this device using the wired connection. Never upgrade using a wireless connection.
Section 3 - Software Configuration
Dynamic DNS
The DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have purchased (www.
whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP
addresses. Using a DDNS service provider, your friends can enter in your domain name to connect to your server no matter what your IP address is.
The following parameters will be available for configuration:
Enable Dynamic Dynamic Domain Name System is a method of
DNS: keeping a domain name linked to a changing IP
Address. Check the box to enable DDNS.
Server Address: Choose your DDNS provider from the drop down
menu.
Host Name: Enter the Host Name that you registered with your
DDNS service provider.
Username or Enter the Username or Key for your DDNS account.
Key:
Password or Key: Enter the Password or Key for your DDNS account.
Verify Password Re-enter the Password or Key for your DDNS
or Key: account.
Timeout: Enter the timeout value used for the DDNS account
here.
Status: Displays the DDNS connection status here.
Section 3 - Software Configuration
The following parameters will be available for configuration:
Enable: Tick this option to enable the Dynamic DNS feature
for IPv6 hosts.
IPv6 Address: Enter the IPv6 Address used here. Alternatively,
the user can select the Computer Name for the
drop-down list and click on the << button to add
it the IPv6 Address field.
Host Name: Enter the IPv6 host name used for the DDNS
account here.
Click on the Save button to add the IPv6 host to the IPv6 Dynamic DNS
List.
Click on the Clear button to clear the information entered in the fields.
Section 3 - Software Configuration
In the IPv6 Dynamic DNS List section, a list of IPv6 hosts will be
displayed. Tick the Enable checkbox to make the host active. To edit a
icon. To remove a specific entry, click on
specific entry click on the
icon.
the
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Section 3 - Software Configuration
System Check
This useful diagnostic utility can be used to check if a computer is on the
Internet. It sends ping packets and listens for replies from the specific
host.
In the Ping Test section the user can test the Internet connectivity by
entering in a host name or the IP address that you want to Ping and click
on the Ping button. The status of your Ping attempt will be displayed in
the Ping Result box.
In the IPv6 Ping Test section the user can test the Internet connectivity
by entering in a host name or the IPv6 address that you want to Ping
and click on the Ping button. The status of your Ping attempt will be
displayed in the Ping Result box.
In the Ping Result section the results of the attempted ping will be
displayed.
Section 3 - Software Configuration
Schedules
Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to 8pm, you could
create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End Time of 8pm.
The following parameters will be available for configuration:
Name: Enter the custom name for the new schedule rule
here. This name is used for identification.
Day(s): To use every day in the week for this rule, select
the All Week option. To use only selected days for
this rule, select the Select Day(s) option and tick
the appropriate days used for this rule.
All Day - 24 hrs: To enable this rule to run 24 hours instead of only
a certain part of the day, tick this option.
Time Format: Select the appropriate time format to use here.
Start Time: If the All Day option is not selected, the user can
enter the starting time here.
End Time: If the All Day option is not selected, the user can
enter the ending time here.
Click on the Add button to add this new rule to the schedule rules list.
Click on the Cancel button to discard the information and cancel the
rule addition.
In the Schedule Rules List section, the user can view the available schedule rules created. To edit an existing rule, click on the
icon of the specific entry.
entry, To remove an existing rule, click on the
icon of the specific
Section 3 - Software Configuration
Status Category
In this category the user will be able to view information regarding the configuration and functionality of this device. The information includes
WAN, LAN and Wireless configurations, System, Firewall, Router logs, and more.
Section 3 - Software Configuration
Device Info
This page displays the current information for the router. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection
is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP and use
Renew to connect to your ISP.
In the General section, information about the time and firmware is
being displayed.
In the WAN section, information about the Internet connection is being
displayed.
In the LAN section, information about the Local Area Network
configuration is being displayed.
Section 3 - Software Configuration
In the Wireless LAN section, information about the Wireless Local Area
Network configuration is being displayed.
In the LAN Computers section, a list of actively connected nodes are
being displayed.
In the IGMP Multicast Memberships section, a list of Multicast Group
Addresses are being displayed.
Section 3 - Software Configuration
Logs
The router automatically logs (records) events of possible interest in it’s internal memory. If there isn’t enough internal memory for all events, logs
of older events are deleted but logs of the latest events are retained. The Logs option allows you to view the router logs. You can define what types
of events you want to view and the level of the events to view. This router also has external Syslog Server support so you can send the log files to
a computer on your network that is running a Syslog utility.
In the Save Log File section, the user can click on the Save button save
the Router’s log entries to a log file on your computer.
The following parameters will be available for configuration:
Log Type: Use the radio buttons to select the types of
messages that you want to display from the log.
System, Firewall & Security, and Router Status
messages can be selected.
Log Level: There are three levels of message importance:
Critical, Warning, and Information. Select the
levels that you want displayed in the log.
The following parameters will be available for configuration:
First - Last Page: Use these buttons to navigate to the first or last
page of the router logs.
Previous - Next: Use these buttons to navigate to the next or
previous page of the router logs.
Clear: Click on this button to clear all the contents from
the log.
Link to Email Log Click this button to open the Email Settings screen
Settings: so that you can change the Email configuration for
sending logs.
Section 3 - Software Configuration
Statistics
The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the router on both the WAN, LAN ports
and the 802.11n/g (2.4GHz) wireless band. The traffic counter will reset if the device is rebooted.
In the LAN Statistics section, the user can view the traffic statistics that
occurred on the LAN interface. Information that is displayed includes the
packets sent and received, packets dropped, collisions that occurred,
and error packets sent and received.
In the WAN Statistics section, the user can view the traffic statistics that
occurred on the WAN interface. Information that is displayed includes
the packets sent and received, packets dropped, collisions that occurred,
and error packets sent and received.
In the Wireless Statistics section, the user can view the traffic statistics
that occurred on the Wireless interface. Information that is displayed
includes the packets sent and received, packets dropped, collisions that
occurred, and error packets sent and received.
Click on the Refresh Statistics button to refresh the display page.
Click on the Reset Statistics button to clear all the statistic information
for all the fields displayed.
Section 3 - Software Configuration
Internet Sessions
The Internet Sessions page displays full details of active Internet sessions
through your router. An Internet session is a conversation between
a program or application on a LAN-side computer and a program or
application on a WAN-side computer.
In the section all the active Internet sessions will be displayed.
Wireless
The wireless client table displays a list of current connected wireless
clients. This table also displays the connection time and MAC address of
the connected wireless clients.
In the Number of Wireless Clients - 2.4GHz Band section a list of 2.4GHz
active wireless clients will be displayed.
Section 3 - Software Configuration
IPv6
The IPv6 page displays a summary of the Router’s IPv6 settings and lists
the IPv6 address and host name of any IPv6 clients.
In the IPv6 Connection Information section, more information about
the IPv6 connection will be displayed. Information like the connection
type, gateway address, Link-Local address, DNS Servers, and more.
In the LAN IPv6 Computers section, a list of actively connected LAN
IPv6 computers will be displayed.
Federal Communication Commission Interference Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES)
Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi
product marketed in US must fixed to US operation channels only.
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Ce dispositif est conforme Ă  la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son
fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prĂŠjudiciable, et
(2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement
indĂŠsirable.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
DĂŠclaration d'exposition aux radiations:
Cet ĂŠquipement est conforme aux limites d'exposition aux rayonnements IC ĂŠtablies pour un environnement non contrĂ´lĂŠ.
Cet ĂŠquipement doit ĂŞtre installĂŠ et utilisĂŠ avec un minimum de 20 cm de distance entre la source de rayonnement et votre
corps.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Annotate, Fill forms, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2013:01:30 16:06:26+08:00
Create Date                     : 2013:01:15 11:54:27+08:00
Metadata Date                   : 2013:01:30 16:06:26+08:00
Creator Tool                    : Adobe Acrobat Pro 10.1.1
Thumbnail Width                 : 256
Thumbnail Height                : 200
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 5171 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : DIR-513_User Manual_20130115.pdf
Creator                         : Vicky
Document ID                     : uuid:f4ede083-ae8e-4d51-8876-b8bfbd8d0032
Instance ID                     : uuid:5b6c26d2-8520-4444-97e9-80e564453657
Rendition Class                 : proof:pdf
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : C:\Users\Vicky\Desktop\_MG_3509.jpg
Producer                        : Acrobat Distiller 10.1.1 (Windows)
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 279.400000
Max Page Size H                 : 215.900000
Max Page Size Unit              : Millimeters
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 預設色票群組
Swatch Groups Group Type        : 0
Page Count                      : 104
Author                          : Vicky

EXIF Metadata provided by EXIF.tools