DATAMAX TECHNOLOGY S905D-DM14S5 Telegenic User Manual DM14
SZ datamax Electronic technology Co.,LTD Telegenic DM14
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3699440 |
| Application ID | 5MGGwbEhOx1+EM5KFyKWVg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 447.71kB (5596337 bits) |
| Date Submitted | 2018-01-01 00:00:00 |
| Date Available | 2018-01-01 00:00:00 |
| Creation Date | 2017-12-18 18:25:01 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2017-12-18 18:32:01 |
| Document Title | user manual-DM14 |
| Document Creator | Adobe Illustrator CC 2014 (Windows) |
| Document Author: | asus |
Data change life Telegenic Model No. S905D-DM14S5 Catalogue FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: o Reorient or relocate the receiving antenna. o Increase the separation between the equipment and receiver. o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. o Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Chapter 1 Overview Page 1 Chapter 2 Connection Page 2 Chapter 3 Remote Control Page 3 Chapter 4 Initial Configuration Page 4~5 Chapter 5 Man Menu Page 6 Chapter 6 Local media play Page 7 Chapter 7 About APP Page 8~10 Chapter 8 Setting Page 11~14 Chapter 9 DTV Page 15~21 Chapter 10 Update Page 22 Chapter 11 Factory data reset Page 23 Chapter 12 Troubleshootings Page 24 Chapter 13 Specification Page 25 Chapter1. Overview Appearance and interface FRONT PANEL RC receiver Standby indicator Power indicator SIDE PANEL Power USB slot AV output TF card slot REAR PANEL LNB input RF input ETHERNET OPTICAL output HDMI output Chapter2. Connection Chapter3. Remote control POWER 11 12 15 REAR PANEL RF cable Lan RF cable EPG PLAY MUTE TEXT SUBTITLE L/R SHIFT INFO REC SWITCH STOP 10 13 14 1.POWER 2.MUTE 3. EPG HOTKEY 4.TEXT 5.L/R AUDIO SWITCH BACK 16 18 17 19 6.SUBTITLE 7. PLAY 8.STOP 20 MOUSE 23 22 21 VOL CHANNEL PAGE- SIDE PANEL 25 24 26 27 DVBPLAY 9.SERVICE INFO FOR CHANNEL 10.TIMESHIFT PAGE+ DELETE 11.FBW Button 12.FFW Button 13.DISPLAY CHANNEL INFO 14.RECORD 15.DTV FUNCTION Buttons (RED,GREEN YELLOW,BLUE) Power adaptor 16.HOME 22.VOL+/- 17.BACK 23.PAGE UP 18.CURSOR 24.PAGE DOWN 19.OK 25.Channel +/- 20.MENU 26.NUNERIC ENTRY 21.MOUSE/REMOTE SWITCH 27.DTV PLAY HOTKEY Chapter4. Initial Configuration Chapter4. Initial Configuration STEP 1 STEP 5 At the “Welcome” page,click “Next” Set up the wired network if you are using a wired home network STEP 2 STEP 6 Select your favorite language Set up the WiFi if you are using a wireless home network STEP 7 STEP 3 Press “Finish” to complete the initial configuration Select output mode STEP 4 Adjust the display position on the watch with your TV set Chapter6. Local Media Chapter6. Local media playPlay Chapter5. Man Menu 5.1 Home Press “Application” in main menu to select “file browser”, Press “ok” button to enter Press Left/Right/Up/Down Keys on your remote to select items and Press “ok” button to enter 5.2 APPLICATION Press Left/Right/Up/Down Keys on your remote to select items and Press “ok” button to enter Select “Local Disk” or “USB” driver Press Empty to add your favorite app as a new shortcut, long press shortcut can delete yourfavorite app 5.3 Smart App Press Left/Right/Up/Down Keys on your remote to select items and Press “ok” button to enter Press “ok” button to enter 5.4 Settings Click the video(or music), there would pop up a option menu, Select your favorite video (or music) player to start playing video(or music) Press Left/Right/Up/Down Keys on your remote to select items and Press “ok” button to enter Click the photos, there would pop up a option menu, Select your favorite photo player to start playing photos Chapter7. About APP Chapter6. Local Chapter7. About APPMedia Play 7.1 About browser - Press “Application” in main menu select browser. - Use Brower to browse the web and visit your favorite websites. - Open multiple webpages, use the Windows menu to switch. - Create a bookmark in the Brower for quick visit. 7.1.1 Open Webpage - Click the address bar to bring up the on screen virtual key-board. - Type a URL and then click - Open a new page: click 7.1.4 About App installer - Click “AppInstaller” in Apps list 7.1.2 Book mark a webpage - Click on the webpage to make a bookmark. - Click on the webpage to open a bookmark. - Select the driver which APK allocated - Select the driver which APK allocated 7.3 About multi screen communication 7.3.1 DLNA 7.1.3 Open multipage at one time - Open a new page: click - Click “Media center” in Apps list. - Turn on “ DLNA DMP ” and “ DLNA DMR ”. - Turn on DLNA in your android mobile device. - Start playing the video,music,photo in your adroid mobile device Chapter7. About APP Chapter6. Local Media Play Chapter8. Setting - You can use setting to re-config your network, display, language…etc. 7.3.2 Airplay - Click “Media center” in Apps list. - Turn on “ DLNA DMP ” and “ DLNA DMR ”. - Turn on DLNA in your android mobile device. - Start playing the video,music,photo in your adroid mobile device 8.1 Network setting 8.1.1 Wi-Fi setting - Click ”Network settings”, select Wi-Fi, click Wi-Fi settings button to on or off to open Wi-Fi or close Wi-Fi. - Open Wi-Fi, waiting till Wi-Fi scanning finished, select Wi-Fi network name from the list, inputpassword, click “connect” 7.3.3 Miracast - Click “Miracast ” in Apps list - Start searching other android device - Turn on the Mirocast option in your android mobile device - Select STB device name and connect it in your andorid mobile device - Start playing video,music,photos in your andorid mobile device 8.1.2 Ethernet setting - Click ”Network settings”, select Ethernet, if Dynamic IP, when plug Ethernet cable, Ethernetsettings will display “Connected” 10 11 Chapter8. Setting - If select Static IP, click “static” in IP settings, revise address in IP address bar,Network gateway barand DNS bar, click save. Chapter6. Local Media Play Chapter8. Setting 8.2.3 Display position - Click display position,press “up” or ”down” key on the remote to adjust display position,Click “back” key to save and back 8.1.3 Portable Wi-Fi hotspot - This device can provide Wi-Fi hotspot for other network devices including PC,mobile,Pad…etc.They can get Free Wi-Fi sevice from this. Click Wi-Fi hotpot button to on, you can set network SSID name,Securtiy,Password as following,Password must be 8 digits at least. Click save.Then you can search SSID name in other network devices with inputting the same password to receive Wi-Fi signal. 8.3 Time settings 8.2 Display setting 8.2.1 Auto output mode - Click Auto output mode button to “on” 8.2.2 Select output mode by hand - Click output mode to “off’’ ,Click HDMI output mode setting - Select the mode in the pop-up list - Presss ok to confirm and back 8.3.1 Date and time - keep “use network-provided time” on can keep TV display correct date and time as local date and time. - Close “Use network-provided time” can input new date and new time in “ set date ” and “set time ”. 8.3.2 Set time zone - Click the select time zone bar,select time zone from the pop -up list,click ok to save and back. 8.4 Language settings 8.4.1 OSD language settings - Click language setting,select the language as OSD language from language list,click “ok” to save and back. 12 13 Chapter8. Setting Chapter6. Chapter9. DTV Local Media Play 9.1 DTV model 8.4.2 Input method settings - Click input settings,click input method from the list,click “ok” to save and back then you use new input method. - This device provides ATSC digital singal receiving - Select DTV logo in Home page, Press "Menu" key on remote to enter into the DTV interface, 8.5 System information 8.5.1 System information - Click system information to see model No., Android Version, Software Version, Hardware version, Apk version, IP address,Mac Address, Serial number. 8.5.2 Memory information - Click Memory information to see the memory space and internal storage space. 9.2 Channel Manager - Click “Channel Manger”, Manage your Channel list. 9.2.1 Channel List Edit - Click “Channel List Edit”, input default password“0000” Manage Channel List 8.6 More other settings - Click Advanced settings for more other settings. 14 - OK: select a channel - FAV : select a channel as your favorite Channel - Lock: Parents Lock - Edit: move, rename,sort ,delete a channel - Skip: Skip the Channel when switch channels 15 Chapter9. DTV Edit Channel - OK: select a channel - Move: change the sequence of a channel - Rename: change the name of a channel - Sort: Sort of the channel list - Delete: Delete a channel Chapter9. DTVLocal Media Play Chapter6. 9.2.3 Delete All Channels - Click “Delete All Channels”. 9.2.2 Favorite List Edit - Click “Favorite List Edit”. - Input password “0000”. - input default password“0000”. - Press “OK” to confirm. 9.3 EPG - Rename: Press right/left key on remote, select a Favorite group, change Favorite Group Name as you like. 9.3.1 Click “EPG” to watch your EPG list - Press “ok” to book a TV program. - Press blue button on remote to check the book list. 9.3.2 Book EPG - Remove: Press right/left key on remote, select a Favorite Channel, remove the channel from the list. 16 - Press blue button on remote to check the book list. 17 Chapter9. DTV - Press red button on remote,you can add a new channel into the timer list. Chapter9. DTVLocal Media Play Chapter6. - Banner timeout:Press right/left button on remote to set banner timeout from 3seconds,5seconds,7seconds,10 seconds options. - Aspect mode: 16:9/4:3/Full stretch/Auto - Switch Channel mode: Freeze /Blank - First audio language: Press right/left button on remote, select language. - Second audio language: Press right/left button on remote, select language. - Subtitle language: Press right/left button on remote, select language. - Tuner Loop-through during Standby: On/Off Select one channel - Press green button on remote,you edit channel EPG infomation. 9.4.2 Parental control - Click “Parental control”. 9.4 DTV preference - Click “DTV preference”. - input password “ 0000 ”. - Set your preferred DTV playing setting. - Menu Lock: Press right/left button on remote to select “on” or” off” to lock or unlock the menu. - Channel Lock: Press right/left button on remote to select “on” or “ off ” to lock or unlock the channel. - Parental rating: Press right/left button on remote to select the children old from 4-18years. - Set password: set new password. 9.4.1 General settings - Antenna Power: Press right/left button on remote to set Antenna Power to “on” or “off ”. - Area Setting:Press right/left button on remote to set area to "air" or "cable" - Chanenel mode: CH3/CH4/LOOP THROUGH - Closed caption:Press "ok" to enter Then set closed caption setting 18 9.4.3 PVR setting - TimeShift Length: 1minute/5minute/30minutes/1hour/user-defined - Record Length: Auto/1minute/10minutes/30minutes/1hours/user-defined - Device Name: Press “ok” to select device name from the list 19 Chapter9. DTV Chapter9. DTVLocal Media Play Chapter6. 9.4.4 Record list - Press “ok” to play the record. - Press red button on remote to select the record. - Press green button on remote to rename the record. - Press blue button on remote to delete the record. - Press yellow button on remote to lock the record. 9.4.5 Timer list - Press red button to add a new channel. - Press green button to edit the channel. - Press Yellow button to delete the chanel. - Click “Manual Search”. - Press blue button on remote to edit scanning setting. 9.5 ATSC TV receiving - Click "IInstallation" enter into the ATSC receiving interface. - Press " "ok button on remote to start searching. - Click “Auto search” to set scanning type, - press start to start searching automaticly 9.7 DTV data reset - Click DTV data reset, input password “ 0000 ”. - Click “OK” to confirm. 20 21 Chapter10. Update Chapter11. Factory reset Chapter6. Localdata Media Play Local update - Select setting in main menu,click “system upgrade”. - Select “Local Update”,click “ok” to Enter. - Click “select” button, select the new software, press “ok” to back. - Click “Update” button to start update. 22 - Select settings in main menu, select “System Advance”. - Click “Factory data reset”. - Click “system data reset” ,press “ok” to confirm. 23 Chapter12. Troubleshootings Chapter13.Specification Chapter6. Local Media Play In some region, the digital terrestrial signal may be weak. So you'd better use the antenna inwhich the booster was built, for watching the weak signal channels. Problem Possible cause Mains lead unplugged Mains fuse blown Check mains lead Check fuse No signal found Aerial is disconnected Aerial is damaged/misaligned Out of digital signal area Check aerial lead Check aerial Check with dealer No picture or sound HDMI/AV is not selected on your TV Reduce to another channel Scrambled channel message Channel is scrambled Select alternative channel No response to remote control Receiver off Handset not aimed correctly Front panel obstructed Hand set batteries exhausted Plug in and turn onplug Aim handset at front panel Check for obstructions Replace handset batteries Forgotten channel lock code Re-install channels to cancel channel lock Forgotten menu lock code Contact help line After moving the STB to another room you find you are no longer ableto receive digital reception AMLOGIC S905D QUAD-CORE 64-BIT CORTEX-A53 UP TO 2.0GHz GPU PENTA-CORE MALI450 MEMORY 1G DDRIII 8G EMMC FLASH OS ANDROID 6.0 What to do Standby light not lit The remote control will not operate your STB CPU RF INPUT CONNECTOR x1 (F-TYPE,FEMALE) RF OUTPUT CONNECTOR x1 (F-TYPE,FEMALE) TUNER&CHANNEL DECODER UHD 4K 60FPS,FHD 1080P 60FPS VIDEO DECODER H.265 10-BIT, H.264, VC-1, MPEG1/2/4 PHOTO DECODER MP3,AAC,WMA,RM,FLAC,OGG VIDEO OUTPUT 4:3/,16:9 SWITCHABLE HDMI, AV MODULATION (1) The batteries inyour remote control need replacing (2) There is an obstruction blocking the signal path between the remote control and the box. The aerial feed formernew point may come through a distribution system which may reduce the digital signal now received bythe box. (1) Replace the batteries CONNETION MAIN POWER CABLE TUNER DATA PORT HDMI OPTICAL AV ETHERNET (2) Check that thereis nothing in the way of the pathbetween the remote control and the receiver Try a direct feed from the antenna POWER SUPPLY INPUT VOLTAGE POWER CONSUMPTION NOTE: 24 QPSK,16QAM,64QAM, 256QAM FIXED TYPE RF INPUTx1,RF OUTPUT x1 USB X3 TFX1 HDMI OUTPUT x1 SPDIF x1 AV OUTPUTx1 R 45x1 12V/1A MAX. 6W Design and Specifications are subject to change without notice. 25
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Modify Date : 2017:12:18 18:32:01+08:00 Create Date : 2017:12:18 18:25:01+08:00 Metadata Date : 2017:12:18 18:32:01+08:00 Creator Tool : Adobe Illustrator CC 2014 (Windows) Thumbnail Width : 256 Thumbnail Height : 40 Thumbnail Format : JPEG Thumbnail Image : (Binary data 4783 bytes, use -b option to extract) Document ID : xmp.did:3709f8f4-b1f7-e842-92e5-7713888dd7c7 Instance ID : uuid:6a2ae590-21f4-46e7-9901-9842b44389ec Original Document ID : uuid:792c3548-2bec-4be4-89ed-73e4903f6870 Rendition Class : proof:pdf Subject : 18 Derived From Instance ID : uuid:66de000e-afef-49d2-9a82-439b7a7db91c Derived From Document ID : xmp.did:eeebaffe-f662-5b4c-9172-b7af5909ebac Derived From Original Document ID: uuid:792c3548-2bec-4be4-89ed-73e4903f6870 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:2f576314-b722-ed42-9af3-0012e08fbf58, xmp.iid:3709f8f4-b1f7-e842-92e5-7713888dd7c7 History When : 2016:06:25 15:47:56+08:00, 2016:08:03 11:19:36+08:00 History Software Agent : Adobe Illustrator CC 2014 (Windows), Adobe Illustrator CC 2014 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference Manifest Reference File Path : F:\客户美工资料\DM14美工资料\Images\DM14-front.png Manifest Reference Document ID : 42D26F7442CA3F42F38F62641AC51E98 Manifest Reference Instance ID : xmp.iid:018b4a44-cab3-0b4d-8160-c32c02d6c246 Ingredients File Path : F:\客户美工资料\DM14美工资料\Images\DM14-front.png Ingredients Document ID : 42D26F7442CA3F42F38F62641AC51E98 Ingredients Instance ID : xmp.iid:018b4a44-cab3-0b4d-8160-c32c02d6c246 Format : application/pdf Creator : asus Title : user manual-DM14 Producer : Acrobat Distiller 9.0.0 (Windows) Source Modified : D:20160621072055 Company : Microsoft N Pages : 1 Has Visible Transparency : True Has Visible Overprint : False Max Page Size W : 210.000000 Max Page Size H : 148.000000 Max Page Size Unit : Millimeters Font Name : ArialMT, HelveticaNeueLTPro-Hv, Calibri, Coves-Bold, GalanoGrotesque-Light, GalanoGrotesque-Medium, GalanoGrotesque-SemiBold, HelveticaNeueLTPro-Lt, HelveticaNeueLTPro-Md, HelveticaNeueLTPro-Bd, Impact, AdobeSongStd-Light Font Family : Arial, Helvetica Neue LT Pro, Calibri, Coves, GalanoGrotesque-Light, GalanoGrotesque-Medium, GalanoGrotesque-SemiBold, Helvetica Neue LT Pro, Helvetica Neue LT Pro, Helvetica Neue LT Pro, Impact, Adobe 宋体 Std Font Face : Regular, 85 Heavy, Regular, Bold, ☞, ☞, ☞, 45 Light, 65 Medium, 75 Bold, Regular, L Font Type : Open Type, Open Type, Open Type, TrueType, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 6.70, Version 1.300;PS 001.003;hotconv 1.0.38, Version 5.72, Jan 2016, initial release, Version 1.000;PS 001.000;hotconv 1.0.70;makeotf.lib2.5.58329;com.myfonts.easy.rene-bieder.galano-grotesque.light.wfkit2.version.4k2v, Version 1.000;PS 001.000;hotconv 1.0.70;makeotf.lib2.5.58329;com.myfonts.easy.rene-bieder.galano-grotesque.medium.wfkit2.version.4k2A, Version 1.000;PS 001.000;hotconv 1.0.70;makeotf.lib2.5.58329;com.myfonts.easy.rene-bieder.galano-grotesque.semi-bold.wfkit2.version.4k2C, Version 1.300;PS 001.003;hotconv 1.0.38, Version 1.300;PS 001.003;hotconv 1.0.38, Version 1.300;PS 001.003;hotconv 1.0.38, Version 5.00, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False, False, False, False, False, False, False, False, False, False Font File Name : arial.ttf, HelveticaNeueLTPro-Hv.otf, calibri.ttf, Coves Bold.otf, Galano Grotesque Light_0.otf, Galano Grotesque Medium_0.otf, Galano Grotesque Semi Bold_0.otf, HelveticaNeueLTPro-Lt.otf, HelveticaNeueLTPro-Md.otf, HelveticaNeueLTPro-Bd.otf, impact.ttf, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : 默认色板组 Swatch Group Type : 0 Page Count : 15 Author : asusEXIF Metadata provided by EXIF.tools