DENSO TEN FT0023A CD Receiver with Bluetooth User Manual FT0023A User s Manual 110218

Fujitsu Ten Limited CD Receiver with Bluetooth FT0023A User s Manual 110218

FT0023A_User's Manual_110218

• Do not leave your cellular phone in the car. The temperature inside may be high and damage the phone.• When you dispose of your car, take care to delete all personal data that are registered in your TOYOTA AUDIO system. You should delete the following Hands-free data from the system;• Bluetooth phone dataIn the following conditions, the system may not function.• The cellular phone is turned off.• The current position is outside the communication area.• The cellular phone is not connected.• The cellular phone has a low battery.HANDS-FREE SYSTEM• The Bluetooth®word mark and logos are owned by the BluetoothHands-free system allows you to make or receive a call without taking SIG, Inc. and use of such marks by TOYOTA MOTORS LIMITED isyour hands off the steering wheel by connecting your cellular phone. under license. Other trade marks and trade names are those of theirThis system supports Bluetooth, a wireless radio data respective owners.transferring system, by which you can make calls without your cellular • Compatible Bluetooth Specifications: Bluetooth Specification Ver. 1.2 phone being connected with a cable or placed on cable. or later If your cellular phone does not support Bluetooth, this system • Compatible Profiles: HFP Ver. 1.5 or latercan not function. OPP Ver. 1.1 or later CAUTIONWhile driving, do not use a cellular phone or connect a Bluetooth phone.ATTENTIONNOTEHANDS-FREE OPERATION④ DISPLAY WINDOW⑧ FUNCTION BUTTONS①VOLUME KNOB③ OFFHOOK BUTTON⑥ ENTER・LIST BUTTON⑤ TUNE• FILE KNOB⑨ SET UP BUTTON!② ONHOOK BUTTON⑦ SEEK/TRACK BUTTONSFUJITSU TEN CONFIDENTIAL
ABOUT THE DISPLAY (5) When Antenna mark is displayed at the right top of the screen, the connection is completed.Reception Level Indication (6) Press the "BACK" FUNCTION BUTTON ⑧ twice to go backThe strength of the reception is indicated in the DISPLAY WINDOW ④ to the previous mode. You cannot register the Bluetooth cellular phone while driving. Park your vehicle in a secure location and select the cellular phone.Bluetooth connection statusWhen a Bluetooth connection is established, " " is shown in theDISPLAY WINDOW ④ If "Failed" is displayed in the DISPLAY WINDOW ④ after entering the pass key, repeat the registration operation.REGISTERING A BLUETOOTH CELLULAR PHONERegistration is required in order to use a Bluetooth system.. CHANGING THE PASS KEYFor details of the operation to be performed at the cellular phone, refer to the instruction manual supplied with the phone. (1) Press the SET UP BUTTON ⑨ to display the phone menu.(2) Select "Bluetooth" by turning the TUNE・FILE KNOB ⑤,REGISTERING BLUETOOTH CELLULAR PHONE FOR THE FIRST TIME and press ENTER・LIST BUTTON ⑥ to display SETUP menu.(NO PHONES CURRENTLY REGISTERED) (3) Select "Set Passcode" by turning the TUNE・FILE KNOB ⑤,(1) Press the SET UP BUTTON ⑨ to display the phone menu. and press ENTER・LIST BUTTON ⑥ to display Bluetooth menu.(2) Select "Bluetooth" by turning the TUNE・FILE KNOB ⑤, and press (4) Change the pass key numbers digit by digit by turning the ENTER・LIST BUTTON ⑥ to display SETUP menu. 　　　TUNE・FILE KNOB ⑤ .The Number can be comprised of from (3) Select "BT Pairing" by turning the TUNE・FILE KNOB ⑤, and press 　　　4 to 8 digits. Press "ENTER" FUNCTION BUTTON ⑧ to complete ENTER・LIST BUTTON ⑥ to display Bluetooth menu. 　　　changing the pass key. (4) After "CAR AUDIO Passkey0000" is displayed, "SEARCHING" (5) Press the "BACK" FUNCTION BUTTON ⑧ twice to go back will be shown. Perform an initial registration on a Bluetooth 　　 to the previous mode. supported cellular phone. （Refer to the instruction manual supplied with the cellular phone.）• The connection method from the telephone set to the unit varies according to the specification of your cellular phone. Refer to the instruction manual You cannot change the pass key while driving. Park your vehicle in a secure supplied with the phone. location and change the pass key.ATTENTION Indication Level ATTENTIONNOTEStrongWeakBluetoothBT PairingSet PasscodeBTBluetoothBACKBACKFUJITSU TEN CONFIDENTIAL
DELETING A REGISTERED CELLULAR PHONE (3) Select "Enter Phone number" by turning the TUNE・FILE(1) Press the SET UP BUTTON ⑨ to display the phone menu. BUTTON ⑤, and press ENTER・LIST BUTTON ⑥ to display(2) Select "Bluetooth" by turning the TUNE・FILE KNOB ⑤, and press PHONE menu. ENTER・LIST BUTTON ⑥ to display SETUP menu. (4) Turn the TUNE・FILE BUTTON ⑤ and "ENTER" FUNCTION(3) Select "List Phone" by turning the TUNE・FILE KNOB ⑤, and press BUTTON ⑧ to enter the phone number digit by digit. ENTER・LIST BUTTON ⑥ to display Bluetooth menu. (5) Press OFF HOOK BUTTON ③ to make a call.(4) Select "CELL" to display the cellular phone information that is currently paired with the AUDIO unit by turning the MAKING A PHONE CALL FROM A REGISTERED NUMBER TUNE・FILE KNOB ⑤. Select a desired cellular phone to be deleted.(5) Turn the TUNE・FILE BUTTON ⑤ and select "Delete" to delete (1) Press the SET UP BUTTON ⑨ to display the phone menu. the currently paired cellular phone. (2) Select "PHONE" and press ENTER・LIST BUTTON ⑥ by turning(6) "Delete a CELL ?" will appear in the DISLAY WINDOW ④ asking for the TUNE・FILE BUTTON ⑤ to display SETUP menu. confirmation, then press "YES" in the FUNCTION BUTTON ⑧. (3) Select "PHONE book" and press ENTER・LIST BUTTON ⑥(7) Press the "BACK" FUNCTION BUTTON ⑧ three times to by turning the TUNE・FILE BUTTON ⑤ to display PHONE menu. go back to the previous mode. (4) Turn the TUNE・FILE BUTTON ⑤and select a phone number to call(5) Press OFF HOOK BUTTON ③ to make a call. You cannot delete the registered telephone set while driving. Park your vehicle in a secure location and delete the registered cellular phone. Phone number is not displayed while driving. Only when the vehicle is stopped or parked, it is displayed.MAKING A PHONE CALLYou can make a phone call using the phone book of the AUDIO unit, manually dialing from the AUDIO unit or direct from your cellular phone.(1) Press the OFF HOOK BUTTON ③ to display the phone menu.(2) Select "PHONE" and press ENTER・LIST BUTTON ⑥ by turning the TUNE・FILE BUTTON ⑤ to display SETUP menu.ATTENTION ATTENTIONDelete a CELL ?YESPHONEENTERBluetoothList PhoneCELLDeleteEnter Phone numberPHONEPHONE bookBACKFUJITSU TEN CONFIDENTIAL
ANSWERING A PHONE CALL (4) Select "Add contact" by turning the TUNE・FILE BUTTON ⑤,When your telephone set receives a call, the name or telephone and press ENTER・LIST BUTTON ⑥to display PHONE book menunumber appears in the DISPLAY WINDOW ④(5) Select "Add one contact" by turning the TUNE・FILE BUTTON ⑤,• If the incoming telephone number is not registered, the telephone and press ENTER・LIST BUTTON ⑥ to display Add number is displayed in the DISPLAY WINDOW ④. one contact menu. If the incoming telephone name and number are registered, the name (6) "REST of memory is 1000, OK ?" will appear in the is displayed in the DISPLAY WiNDOW ④. DISLAY WINDOW ④ asking for confirmation, then press "YES" If only the incoming telephone number is registered, the telephone in the FUNCTION BUTTON ⑧. number is displayed in the DISPLAY WINDOW ④.(7) Transfer a desired phone number to be added from a currently paired cellular phone to the AUDIO unit.(1) Press the OFF HOOK BUTTON ③ to talk using the hands-free system. (By manipulating a cellular phone, select Bluetooth transmission (2) Press ON HOOK BUTTON ② to hang up the phone. > select the audio player > select OK .)(8) Press the "BACK" FUNCTION BUTTON ⑧ four times to go back to the previous mode.REFUSING AN INCOMING CALL　・ Press ON HOOK BUTTON ② while the phone is ringing. You cannot register any information in the phone book while driving.REGISTERING INFORMATION IN THE PHONE BOOK Park your vehicle in secure location and then register the information.Telephone numbers and names can also be registered manuallyin the phone book. Up to 100 entries can be registered in thephone book of the main device.REGISTERING THE PHONE BOOK DATA OF A MOBILE PHONE IN DELETING THE DATA IN THE PHONE BOOKTHE PHONE BOOK OF THE MAIN DEVICETo register the phone book data of a mobile phone registered in (1) Press the SET UP BUTTON ⑨ to display the phone menu.the main device. (2) Select "PHONE" by turning the TUNE・FILE BUTTON ⑤, and(1) Press the SET UP BUTTON ⑨ to display the phone menu. press ENTER・LIST BUTTON ⑥ to display SETUP menu.(2) Select "PHONE" by turning the TUNE・FILE BUTTON ⑤, and press (3) Select "PHONE book" by turning the TUNE・FILE BUTTON ⑤,　　　ENTER・LIST BUTTON ⑥ to display SETUP menu. and press ENTER・LIST BUTTON ⑥ to display PHONE menu.(3) Select "PHONE book" by turning the TUNE・FILE BUTTON ⑤, and press ENTER・LIST BUTTON ⑥ to display PHONE menu.ATTENTIONAdd contactPHONEPHONEPHONE bookAdd one contactREST of memory is 1000, OK ?PHONE bookBACKFUJITSU TEN CONFIDENTIAL
(4) Select "Delete history" by turning the TUNE・FILE BUTTON ⑤,SETTING THE VOLUME OF THE RING TONE and press ENTER・LIST BUTTON ⑥ to display PHONE book menu. (1) Press the SET UP BUTTON ⑨ to display the phone menu.(5) Select "All Calls" by turning the TUNE・FILE BUTTON ⑤, (2) Select "PHONE" by turning the TUNE・FILE BUTTON ⑤, and press ENTER・LIST BUTTON ⑥ to display Delete history menu. and press ENTER・LIST BUTTON ⑥ to display SETUP menu.(6) Select a registered number to delete by turning the (3) Select "HF Soundsetting" by turning the TUNE・FILE BUTTON ⑤, TUNE・FILE BUTTON ⑤, and press ENTER・LIST BUTTON ⑥. and press ENTER・LIST BUTTON ⑥ to display Bluetooth menu.(7) "Delete from All Calls?" will appear in the DISLAY WINDOW ④(4) Select "Ringtone Volume" by turning the TUNE・FILE BUTTON ⑤, asking for confirmation, then press "YES" in the and press ENTER・LIST BUTTON ⑥ to display FUNCTION BUTTON ⑧. HF Soundsetting menu.(8) Press the "BACK" FUNCTION BUTTON ⑧ twice to go back (5) Turn the TUNE・FILE BUTTON ⑤ to change the volume. to the previous mode. (6) Press "SAVE" in the FUNCTION BUTTON ⑧ to complete the setting. (7) Press the "BACK" FUNCTION BUTTON ⑧ three times to go back to the previous mode. You cannot delete the phone book data while driving. Park your vehicle in a secure location and then delete the data.The volume and microphone gain setting for each cellular phone is differentaccording to its specification.SETTING THE VOLUME Please adjust the volume by turning the VOLUME KNOB ①.SETTING THE SPEECH VOLUME(1) Press the SET UP BUTTON ⑨ to display the phone menu. CHANGING THE TRANSMITTING VOLUME (2) Select "PHONE" and press ENTER・LIST BUTTON ⑥ by turning the TUNE・FILE BUTTON ⑤, to display SETUP menu. 　・　During phone conversation press SEEK・TRACK BUTTON(3) Select "HF Soundsetting" and press ENTER・LIST BUTTON ⑥ ∧(UP) or ∨(DOWN) for volume adjustment. by turning the TUNE・FILE BUTTON ⑤, to display Bluetooth menu.(4) Select "all Volume" by turning the TUNE・FILE BUTTON ⑤, and press ENTER・LIST BUTTON ⑥ to display HF Soundsetting menu.(5) Turn the TUNE・FILE BUTTON ⑤ to change the volume.(6) Press "SAVE" in the FUNCTION BUTTON ⑧ to complete the setting.(7) Press the "BACK" FUNCTION BUTTON ⑧ three times to go back to the previous mode.ATTENTIONNOTEDelete historyHF SoundsettingPHONEAll Callsall VolumeBACKBACKBACKSAVESAVEPHONEHF SoundsettingRingtone VolumeDelete from All Calls ?YESFUJITSU TEN CONFIDENTIAL
FCC ID: BABFT0023AIC : 2024B-FT0023AChanges or modifications not expressly approved by the party This device complies with part 15 of the FCC Rules. responsible for compliance could void the user'sOperation is subject to the following two conditions: authority to operate the equipment.(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including 　　 interference that may cause undesired operation.Radio Frequency Radiation ExposureL'utilisation de ce dispositif est autorisée seulement aux deux conditions This equipment complies with FCC radiation exposure limits setsuivantes : (1) il ne doit pas produire de brouillage, et (2) l'utilisateur du forth for uncontrolled equipment and meets the FCC radiodispositif doit être prêt à accepter tout brouillage radioélectrique reçu, frequency (RF) Exposure Guidelines in Supplement C to OET65. même si ce brouillage est susceptible de compromettre le fonctionnement This equipment has very low levels of RF energy that it du dispositif. deemed to comply without maximum permissive exposure evaluation (MPE).But it is desirable that it should be installed and operated with at least 20cmand more between the radiator and person's body (excluding extremities: hands, writsts, feet and ankles).This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.WARNINGCAUTIONFUJITSU TEN CONFIDENTIAL

Navigation menu