DENSO TEN FT0023A CD Receiver with Bluetooth User Manual FT0023A User s Manual 110218
Fujitsu Ten Limited CD Receiver with Bluetooth FT0023A User s Manual 110218
FT0023A_User's Manual_110218
HANDS-FREE OPERATION ② ON HOOK BUTTON ③ OFF HOOK BUTTON ATTENTION ④ DISPLAY WINDOW • Do not leave your cellular phone in the car. The temperature inside may be high and damage the phone. • When you dispose of your car, take care to delete all personal data that are registered in your TOYOTA AUDIO system. You should delete the following Hands-free data from the system; • Bluetooth phone data ⑤ TUNE• FILE KNOB ①VOLUME KNOB ⑧ FUNCTION BUTTONS ⑦ SEEK/TRACK BUTTONS ⑥ ENTER・LIST BUTTON ⑨ SET UP BUTTON NOTE In the following conditions, the system may not function. • The cellular phone is turned off. • The current position is outside the communication area. • The cellular phone is not connected. • The cellular phone has a low battery. HANDS-FREE SYSTEM Hands-free system allows you to make or receive a call without taking your hands off the steering wheel by connecting your cellular phone. This system supports Bluetooth, a wireless radio data transferring system, by which you can make calls without your cellular phone being connected with a cable or placed on cable. If your cellular phone does not support Bluetooth, this system can not function. • The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and use of such marks by TOYOTA MOTORS LIMITED is under license. Other trade marks and trade names are those of their respective owners. • Compatible Bluetooth Specifications: Bluetooth Specification Ver. 1.2 or later • Compatible Profiles: HFP Ver. 1.5 or later OPP Ver. 1.1 or later CAUTION While driving, do not use a cellular phone or connect a Bluetooth phone. FUJITSU TEN CONFIDENTIAL ABOUT THE DISPLAY Reception Level Indication The strength of the reception is indicated in the DISPLAY WINDOW ④ (5) When Antenna mark is displayed at the right top of the screen, the connection is completed. BACK FUNCTION BUTTON ⑧ twice to go back (6) Press the "BACK" to the previous mode. Indication Level Weak ATTENTION Strong You cannot register the Bluetooth cellular phone while driving. Park your vehicle in a secure location and select the cellular phone. Bluetooth connection status When a Bluetooth connection is established, " BT " is shown in the DISPLAY WINDOW ④ NOTE If "Failed" is displayed in the DISPLAY WINDOW ④ after entering the pass key, repeat the registration operation. REGISTERING A BLUETOOTH CELLULAR PHONE Registration is required in order to use a Bluetooth system.. For details of the operation to be performed at the cellular phone, refer to the instruction manual supplied with the phone. REGISTERING BLUETOOTH CELLULAR PHONE FOR THE FIRST TIME (NO PHONES CURRENTLY REGISTERED) (1) Press the SET UP BUTTON ⑨ to display the phone menu. Bluetooth (2) Select "Bluetooth" by turning the TUNE・FILE KNOB ⑤, and press ENTER・LIST BUTTON ⑥ to display SETUP menu. BT Pairing" Pairing (3) Select "BT by turning the TUNE・FILE KNOB ⑤, and press ENTER・LIST BUTTON ⑥ to display Bluetooth menu. (4) After "CAR AUDIO Passkey0000" is displayed, "SEARCHING" will be shown. Perform an initial registration on a Bluetooth supported cellular phone. (Refer to the instruction manual supplied with the cellular phone.) CHANGING THE PASS KEY (1) Press the SET UP BUTTON ⑨ to display the phone menu. Bluetooth (2) Select "Bluetooth" by turning the TUNE・FILE KNOB ⑤, and press ENTER・LIST BUTTON ⑥ to display SETUP menu. SetPasscode" Passcode (3) Select "Set by turning the TUNE・FILE KNOB ⑤, and press ENTER・LIST BUTTON ⑥ to display Bluetooth menu. (4) Change the pass key numbers digit by digit by turning the TUNE・FILE KNOB ⑤.The Number can be comprised of from 4 to 8 digits. Press "ENTER" FUNCTION BUTTON ⑧ to complete changing the pass key. BACK FUNCTION BUTTON ⑧ twice to go back (5) Press the "BACK" to the previous mode. ATTENTION • The connection method from the telephone set to the unit varies according to the specification of your cellular phone. Refer to the instruction manual supplied with the phone. You cannot change the pass key while driving. Park your vehicle in a secure location and change the pass key. FUJITSU TEN CONFIDENTIAL DELETING A REGISTERED CELLULAR PHONE (1) Press the SET UP BUTTON ⑨ to display the phone menu. Bluetooth by turning the TUNE・FILE KNOB ⑤, and press (2) Select "Bluetooth" ENTER・LIST BUTTON ⑥ to display SETUP menu. List Phone" Phone (3) Select "List by turning the TUNE・FILE KNOB ⑤, and press ENTER・LIST BUTTON ⑥ to display Bluetooth menu. CELL to display the cellular phone information (4) Select "CELL" that is currently paired with the AUDIO unit by turning the TUNE・FILE KNOB ⑤. Select a desired cellular phone to be deleted. Delete to delete (5) Turn the TUNE・FILE BUTTON ⑤ and select "Delete" the currently paired cellular phone. Delete a CELL ? ?" will appear in the DISLAY WINDOW ④ asking for (6) "Delete CELL YES in the FUNCTION BUTTON ⑧. confirmation, then press "YES" BACK FUNCTION BUTTON ⑧ three times to (7) Press the "BACK" go back to the previous mode. EnterPhone Phone number (3) Select "Enter number" by turning the TUNE・FILE BUTTON ⑤, and press ENTER・LIST BUTTON ⑥ to display PHONE menu. ENTER FUNCTION (4) Turn the TUNE・FILE BUTTON ⑤ and "ENTER" BUTTON ⑧ to enter the phone number digit by digit. (5) Press OFF HOOK BUTTON ③ to make a call. MAKING A PHONE CALL FROM A REGISTERED NUMBER (1) Press the SET UP BUTTON ⑨ to display the phone menu. PHONE and press ENTER・LIST BUTTON ⑥ by turning (2) Select "PHONE" the TUNE・FILE BUTTON ⑤ to display SETUP menu. PHONE book (3) Select "PHONE book" and press ENTER・LIST BUTTON ⑥ by turning the TUNE・FILE BUTTON ⑤ to display PHONE menu. (4) Turn the TUNE・FILE BUTTON ⑤ and select a phone number to call (5) Press OFF HOOK BUTTON ③ to make a call. ATTENTION You cannot delete the registered telephone set while driving. Park your vehicle in a secure location and delete the registered cellular phone. ATTENTION Phone number is not displayed while driving. Only when the vehicle is stopped or parked, it is displayed. MAKING A PHONE CALL You can make a phone call using the phone book of the AUDIO unit, manually dialing from the AUDIO unit or direct from your cellular phone. (1) Press the OFF HOOK BUTTON ③ to display the phone menu. PHONE and press ENTER・LIST BUTTON ⑥ by turning the (2) Select "PHONE" TUNE・FILE BUTTON ⑤ to display SETUP menu. FUJITSU TEN CONFIDENTIAL ANSWERING A PHONE CALL When your telephone set receives a call, the name or telephone number appears in the DISPLAY WINDOW ④ • If the incoming telephone number is not registered, the telephone number is displayed in the DISPLAY WINDOW ④. If the incoming telephone name and number are registered, the name is displayed in the DISPLAY WiNDOW ④. If only the incoming telephone number is registered, the telephone number is displayed in the DISPLAY WINDOW ④. (1) Press the OFF HOOK BUTTON ③ to talk using the hands-free system. (2) Press ON HOOK BUTTON ② to hang up the phone. Add contact" contact (4) Select "Add by turning the TUNE・FILE BUTTON ⑤, and press ENTER・LIST BUTTON ⑥ to display PHONE book menu (5) Select "Add contact" by turning the TUNE・FILE BUTTON ⑤, Add one one contact and press ENTER・LIST BUTTON ⑥ to display Add one contact menu. REST memory isis1000, OK OK ? ?" will appear in the (6) "REST of ofmemory 1000, DISLAY WINDOW ④ asking for confirmation, then press "YES" in the FUNCTION BUTTON ⑧. (7) Transfer a desired phone number to be added from a currently paired cellular phone to the AUDIO unit. (By manipulating a cellular phone, select Bluetooth transmission > select the audio player > select OK .) BACK FUNCTION BUTTON ⑧ four times to go (8) Press the "BACK" back to the previous mode. REFUSING AN INCOMING CALL ・ Press ON HOOK BUTTON ② while the phone is ringing. ATTENTION You cannot register any information in the phone book while driving. Park your vehicle in secure location and then register the information. REGISTERING INFORMATION IN THE PHONE BOOK Telephone numbers and names can also be registered manually in the phone book. Up to 100 entries can be registered in the phone book of the main device. REGISTERING THE PHONE BOOK DATA OF A MOBILE PHONE IN THE PHONE BOOK OF THE MAIN DEVICE DELETING THE DATA IN THE PHONE BOOK To register the phone book data of a mobile phone registered in the main device. (1) Press the SET UP BUTTON ⑨ to display the phone menu. PHONE by turning the TUNE・FILE BUTTON ⑤, and press (2) Select "PHONE" ENTER・LIST BUTTON ⑥ to display SETUP menu. PHONE book (3) Select "PHONE book" by turning the TUNE・FILE BUTTON ⑤, and press ENTER・LIST BUTTON ⑥ to display PHONE menu. (1) Press the SET UP BUTTON ⑨ to display the phone menu. PHONE by turning the TUNE・FILE BUTTON ⑤, and (2) Select "PHONE" press ENTER・LIST BUTTON ⑥ to display SETUP menu. PHONE book (3) Select "PHONE book" by turning the TUNE・FILE BUTTON ⑤, and press ENTER・LIST BUTTON ⑥ to display PHONE menu. FUJITSU TEN CONFIDENTIAL Delete history (4) Select "Delete history" by turning the TUNE・FILE BUTTON ⑤, and press ENTER・LIST BUTTON ⑥ to display PHONE book menu. All Calls" Calls (5) Select "All by turning the TUNE・FILE BUTTON ⑤, and press ENTER・LIST BUTTON ⑥ to display Delete history menu. (6) Select a registered number to delete by turning the TUNE・FILE BUTTON ⑤, and press ENTER・LIST BUTTON ⑥. Deletefrom from All (7) "Delete AllCalls Calls?" will appear in the DISLAY WINDOW ④ YES in the asking for confirmation, then press "YES" FUNCTION BUTTON ⑧. BACK FUNCTION BUTTON ⑧ twice to go back (8) Press the "BACK" to the previous mode. SETTING THE VOLUME OF THE RING TONE (1) Press the SET UP BUTTON ⑨ to display the phone menu. PHONE by turning the TUNE・FILE BUTTON ⑤, (2) Select "PHONE" and press ENTER・LIST BUTTON ⑥ to display SETUP menu. (3) Select "HFHFSoundsetting" by turning the TUNE・FILE BUTTON ⑤, Soundsetting and press ENTER・LIST BUTTON ⑥ to display Bluetooth menu. Ringtone Volume (4) Select "Ringtone Volume" by turning the TUNE・FILE BUTTON ⑤, and press ENTER・LIST BUTTON ⑥ to display HF Soundsetting menu. (5) Turn the TUNE・FILE BUTTON ⑤ to change the volume. SAVE in the FUNCTION BUTTON ⑧ to complete (6) Press "SAVE" the setting. BACK FUNCTION BUTTON ⑧ three times to (7) Press the "BACK" go back to the previous mode. ATTENTION NOTE You cannot delete the phone book data while driving. Park your vehicle in a secure location and then delete the data. The volume and microphone gain setting for each cellular phone is different according to its specification. SETTING THE VOLUME Please adjust the volume by turning the VOLUME KNOB ①. SETTING THE SPEECH VOLUME (1) Press the SET UP BUTTON ⑨ to display the phone menu. PHONE and press ENTER・LIST BUTTON ⑥ by turning the (2) Select "PHONE" TUNE・FILE BUTTON ⑤, to display SETUP menu. Soundsetting (3) Select "HFHFSoundsetting" and press ENTER・LIST BUTTON ⑥ by turning the TUNE・FILE BUTTON ⑤, to display Bluetooth menu. Volume (4) Select "allallVolume" by turning the TUNE・FILE BUTTON ⑤, and press ENTER・LIST BUTTON ⑥ to display HF Soundsetting menu. (5) Turn the TUNE・FILE BUTTON ⑤ to change the volume. SAVE in the FUNCTION BUTTON ⑧ to complete the setting. (6) Press "SAVE" BACK FUNCTION BUTTON ⑧ three times to go back (7) Press the "BACK" to the previous mode. CHANGING THE TRANSMITTING VOLUME ・ During phone conversation press SEEK・TRACK BUTTON ∧(UP) or ∨(DOWN) for volume adjustment. FUJITSU TEN CONFIDENTIAL WARNING FCC ID: BABFT0023A IC : 2024B-FT0023A This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. L'utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) l'utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAUTION Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20cm and more between the radiator and person's body (excluding extremities: hands, writsts, feet and ankles). This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. FUJITSU TEN CONFIDENTIAL
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : sp0560 Company : FTSP Create Date : 2011:02:18 15:06:52+09:00 Modify Date : 2011:02:18 15:08:21+09:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Producer : Acrobat Distiller 9.0.0 (Windows) Creator Tool : Excel 用 Acrobat PDFMaker 9.0 Metadata Date : 2011:02:18 15:08:21+09:00 Format : application/pdf Creator : sp0560 Title : Document ID : uuid:e5afcb4a-3241-4e63-885a-b1847d0af373 Instance ID : uuid:bb7f26e8-225e-4eb4-892c-633dbee96ec0 Page Layout : SinglePage Page Count : 6EXIF Metadata provided by EXIF.tools