DENSO TEN FT0023A CD Receiver with Bluetooth User Manual FT0023A User s Manual 110218
Fujitsu Ten Limited CD Receiver with Bluetooth FT0023A User s Manual 110218
FT0023A_User's Manual_110218
• Do not leave your cellular phone in the car. The temperature inside may
be high and damage the phone.
• When you dispose of your car, take care to delete all personal data that
are registered in your TOYOTA AUDIO system. You should delete
the following Hands-free data from the system;
• Bluetooth phone data
In the following conditions, the system may not function.
• The cellular phone is turned off.
• The current position is outside the communication area.
• The cellular phone is not connected.
• The cellular phone has a low battery.
HANDS-FREE SYSTEM
• The Bluetooth®word mark and lo
g
os are owned b
y
the Bluetooth
Hands-free system allows you to make or receive a call without taking SIG, Inc. and use of such marks by TOYOTA MOTORS LIMITED is
your hands off the steering wheel by connecting your cellular phone. under license. Other trade marks and trade names are those of their
This system supports Bluetooth, a wireless radio data respective owners.
transferring system, by which you can make calls without your cellular • Compatible Bluetooth Specifications: Bluetooth Specification Ver. 1.2
phone being connected with a cable or placed on cable. or later
If your cellular phone does not support Bluetooth, this system • Compatible Profiles: HFP Ver. 1.5 or later
can not function. OPP Ver. 1.1 or later
CAUTION
While driving, do not use a cellular phone or connect a Bluetooth phone.
ATTENTION
NOTE
HANDS-FREE OPERATION
④ DISPLAY WINDOW
⑧ FUNCTION
BUTTONS
①VOLUME
KNOB
③ OFF
HOOK
BUTTON
⑥ ENTER・LIST
BUTTON
⑤ TUNE•
FILE
KNOB
⑨ SET UP
BUTTON
!
② ON
HOOK
BUTTON
⑦ SEEK/TRACK
BUTTONS
FUJITSU TEN CONFIDENTIAL
ABOUT THE DISPLAY (5) When Antenna mark is displayed at the right top of the screen,
the connection is completed.
Reception Level Indication (6) Press the "BACK" FUNCTION BUTTON ⑧ twice to go back
The strength of the reception is indicated in the DISPLAY WINDOW ④ to the previous mode.
You cannot register the Bluetooth cellular phone while driving. Park your
vehicle in a secure location and select the cellular phone.
Bluetooth connection status
When a Bluetooth connection is established, " " is shown in the
DISPLAY WINDOW ④
If "Failed" is displayed in the DISPLAY WINDOW ④ after entering the
pass key, repeat the registration operation.
REGISTERING A BLUETOOTH CELLULAR PHONE
Registration is required in order to use a Bluetooth system.. CHANGING THE PASS KEY
For details of the operation to be performed at the cellular phone,
refer to the instruction manual supplied with the phone. (1) Press the SET UP BUTTON ⑨ to display the phone menu.
(2) Select "Bluetooth" by turning the TUNE・FILE KNOB ⑤,
REGISTERING BLUETOOTH CELLULAR PHONE FOR THE FIRST TIME and press ENTER・LIST BUTTON ⑥ to display SETUP menu.
(NO PHONES CURRENTLY REGISTERED) (3) Select "Set Passcode" by turning the TUNE・FILE KNOB ⑤,
(1) Press the SET UP BUTTON ⑨ to display the phone menu. and press ENTER・LIST BUTTON ⑥ to display Bluetooth menu.
(2) Select "Bluetooth" by turning the TUNE・FILE KNOB ⑤, and press (4) Change the pass key numbers digit by digit by turning the
ENTER・LIST BUTTON ⑥ to display SETUP menu. TUNE・FILE KNOB ⑤ .The Number can be comprised of from
(3) Select "BT Pairing" by turning the TUNE・FILE KNOB ⑤, and press 4 to 8 digits. Press "ENTER" FUNCTION BUTTON ⑧ to complete
ENTER・LIST BUTTON ⑥ to display Bluetooth menu. changing the pass key.
(4) After "CAR AUDIO Passkey0000" is displayed, "SEARCHING" (5) Press the "BACK" FUNCTION BUTTON ⑧ twice to go back
will be shown. Perform an initial registration on a Bluetooth to the previous mode.
supported cellular phone.
（Refer to the instruction manual supplied with the cellular phone.）
• The connection method from the telephone set to the unit varies according
to the specification of your cellular phone. Refer to the instruction manual You cannot change the pass key while driving. Park your vehicle in a secure
supplied with the phone. location and change the pass key.
ATTENTION
Indication
Level ATTENTION
NOTE
StrongWeak
Bluetooth
BT Pairing
Set Passcode
BT
Bluetooth
BACK
BACK
FUJITSU TEN CONFIDENTIAL
DELETING A REGISTERED CELLULAR PHONE (3) Select "Enter Phone number" by turning the TUNE・FILE
(1) Press the SET UP BUTTON ⑨ to display the phone menu. BUTTON ⑤, and press ENTER・LIST BUTTON ⑥ to display
(2) Select "Bluetooth" by turning the TUNE・FILE KNOB ⑤, and press PHONE menu.
ENTER・LIST BUTTON ⑥ to display SETUP menu. (4) Turn the TUNE・FILE BUTTON ⑤ and "ENTER" FUNCTION
(3) Select "List Phone" by turning the TUNE・FILE KNOB ⑤, and press BUTTON ⑧ to enter the phone number digit by digit.
ENTER・LIST BUTTON ⑥ to display Bluetooth menu. (5) Press OFF HOOK BUTTON ③ to make a call.
(4) Select "CELL" to display the cellular phone information
that is currently paired with the AUDIO unit by turning the MAKING A PHONE CALL FROM A REGISTERED NUMBER
TUNE・FILE KNOB ⑤. Select a desired cellular phone to be deleted.
(5) Turn the TUNE・FILE BUTTON ⑤ and select "Delete" to delete (1) Press the SET UP BUTTON ⑨ to display the phone menu.
the currently paired cellular phone. (2) Select "PHONE" and press ENTER・LIST BUTTON ⑥ by turning
(6) "Delete a CELL ?" will appear in the DISLAY WINDOW ④ asking for the TUNE・FILE BUTTON ⑤ to display SETUP menu.
confirmation, then press "YES" in the FUNCTION BUTTON ⑧. (3) Select "PHONE book" and press ENTER・LIST BUTTON ⑥
(7) Press the "BACK" FUNCTION BUTTON ⑧ three times to by turning the TUNE・FILE BUTTON ⑤ to display PHONE menu.
go back to the previous mode. (4) Turn the TUNE・FILE BUTTON ⑤and select a phone number to call
(5) Press OFF HOOK BUTTON ③ to make a call.
You cannot delete the registered telephone set while driving. Park your
vehicle in a secure location and delete the registered cellular phone. Phone number is not displayed while driving. Only when the vehicle is
stopped or parked, it is displayed.
MAKING A PHONE CALL
You can make a phone call using the phone book of the AUDIO unit,
manually dialing from the AUDIO unit or direct from your cellular phone.
(1) Press the OFF HOOK BUTTON ③ to display the phone menu.
(2) Select "PHONE" and press ENTER・LIST BUTTON ⑥ by turning the
TUNE・FILE BUTTON ⑤ to display SETUP menu.
ATTENTION ATTENTION
Delete a CELL ?
YES
PHONE
ENTER
Bluetooth
List Phone
CELL
Delete
Enter Phone number
PHONE
PHONE book
BACK
FUJITSU TEN CONFIDENTIAL
ANSWERING A PHONE CALL (4) Select "Add contact" by turning the TUNE・FILE BUTTON ⑤,
When your telephone set receives a call, the name or telephone and press ENTER・LIST BUTTON ⑥to display PHONE book menu
number appears in the DISPLAY WINDOW ④(5) Select "Add one contact" by turning the TUNE・FILE BUTTON ⑤,
• If the incoming telephone number is not registered, the telephone and press ENTER・LIST BUTTON ⑥ to display Add
number is displayed in the DISPLAY WINDOW ④. one contact menu.
If the incoming telephone name and number are registered, the name (6) "REST of memory is 1000, OK ?" will appear in the
is displayed in the DISPLAY WiNDOW ④. DISLAY WINDOW ④ asking for confirmation, then press "YES"
If only the incoming telephone number is registered, the telephone in the FUNCTION BUTTON ⑧.
number is displayed in the DISPLAY WINDOW ④.(7) Transfer a desired phone number to be added from a currently
paired cellular phone to the AUDIO unit.
(1) Press the OFF HOOK BUTTON ③ to talk using the hands-free system. (By manipulating a cellular phone, select Bluetooth transmission
(2) Press ON HOOK BUTTON ② to hang up the phone. > select the audio player > select OK .)
(8) Press the "BACK" FUNCTION BUTTON ⑧ four times to go
back to the previous mode.
REFUSING AN INCOMING CALL
・ Press ON HOOK BUTTON ② while the phone is ringing.
You cannot register any information in the phone book while driving.
REGISTERING INFORMATION IN THE PHONE BOOK Park your vehicle in secure location and then register the information.
Telephone numbers and names can also be registered manually
in the phone book. Up to 100 entries can be registered in the
phone book of the main device.
REGISTERING THE PHONE BOOK DATA OF A MOBILE PHONE IN DELETING THE DATA IN THE PHONE BOOK
THE PHONE BOOK OF THE MAIN DEVICE
To register the phone book data of a mobile phone registered in (1) Press the SET UP BUTTON ⑨ to display the phone menu.
the main device. (2) Select "PHONE" by turning the TUNE・FILE BUTTON ⑤, and
(1) Press the SET UP BUTTON ⑨ to display the phone menu. press ENTER・LIST BUTTON ⑥ to display SETUP menu.
(2) Select "PHONE" by turning the TUNE・FILE BUTTON ⑤, and press (3) Select "PHONE book" by turning the TUNE・FILE BUTTON ⑤,
ENTER・LIST BUTTON ⑥ to display SETUP menu. and press ENTER・LIST BUTTON ⑥ to display PHONE menu.
(3) Select "PHONE book" by turning the TUNE・FILE BUTTON ⑤,
and press ENTER・LIST BUTTON ⑥ to display PHONE menu.
ATTENTION
Add contact
PHONE
PHONE
PHONE book
Add one contact
REST of memory is 1000, OK ?
PHONE book
BACK
FUJITSU TEN CONFIDENTIAL
(4) Select "Delete history" by turning the TUNE・FILE BUTTON ⑤,SETTING THE VOLUME OF THE RING TONE
and press ENTER・LIST BUTTON ⑥ to display PHONE book menu. (1) Press the SET UP BUTTON ⑨ to display the phone menu.
(5) Select "All Calls" by turning the TUNE・FILE BUTTON ⑤, (2) Select "PHONE" by turning the TUNE・FILE BUTTON ⑤,
and press ENTER・LIST BUTTON ⑥ to display Delete history menu. and press ENTER・LIST BUTTON ⑥ to display SETUP menu.
(6) Select a registered number to delete by turning the (3) Select "HF Soundsetting" by turning the TUNE・FILE BUTTON ⑤,
TUNE・FILE BUTTON ⑤, and press ENTER・LIST BUTTON ⑥. and press ENTER・LIST BUTTON ⑥ to display Bluetooth menu.
(7) "Delete from All Calls?" will appear in the DISLAY WINDOW ④(4) Select "Ringtone Volume" by turning the TUNE・FILE BUTTON ⑤,
asking for confirmation, then press "YES" in the and press ENTER・LIST BUTTON ⑥ to display
FUNCTION BUTTON ⑧. HF Soundsetting menu.
(8) Press the "BACK" FUNCTION BUTTON ⑧ twice to go back (5) Turn the TUNE・FILE BUTTON ⑤ to change the volume.
to the previous mode. (6) Press "SAVE" in the FUNCTION BUTTON ⑧ to complete
the setting.
(7) Press the "BACK" FUNCTION BUTTON ⑧ three times to
go back to the previous mode.
You cannot delete the phone book data while driving. Park your vehicle
in a secure location and then delete the data.
The volume and microphone gain setting for each cellular phone is different
according to its specification.
SETTING THE VOLUME Please adjust the volume by turning the VOLUME KNOB ①.
SETTING THE SPEECH VOLUME
(1) Press the SET UP BUTTON ⑨ to display the phone menu. CHANGING THE TRANSMITTING VOLUME
(2) Select "PHONE" and press ENTER・LIST BUTTON ⑥ by turning the
TUNE・FILE BUTTON ⑤, to display SETUP menu. ・ During phone conversation press SEEK・TRACK BUTTON
(3) Select "HF Soundsetting" and press ENTER・LIST BUTTON ⑥ ∧(UP) or ∨(DOWN) for volume adjustment.
by turning the TUNE・FILE BUTTON ⑤, to display Bluetooth menu.
(4) Select "all Volume" by turning the TUNE・FILE BUTTON ⑤,
and press ENTER・LIST BUTTON ⑥ to display HF Soundsetting menu.
(5) Turn the TUNE・FILE BUTTON ⑤ to change the volume.
(6) Press "SAVE" in the FUNCTION BUTTON ⑧ to complete the setting.
(7) Press the "BACK" FUNCTION BUTTON ⑧ three times to go back
to the previous mode.
ATTENTION
NOTE
Delete history
HF Soundsetting
PHONE
All Calls
all Volume
BACK
BACK
BACK
SAVE
SAVE
PHONE
HF Soundsetting
Ringtone Volume
Delete from All Calls ?
YES
FUJITSU TEN CONFIDENTIAL
FCC ID: BABFT0023
A
IC : 2024B-FT0023
A
Changes or modifications not expressly approved by the party
This device complies with part 15 of the FCC Rules. responsible for compliance could void the user's
Operation is subject to the following two conditions: authority to operate the equipment.
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Radio Frequency Radiation Exposure
L'utilisation de ce dispositif est autorisée seulement aux deux conditions This equipment complies with FCC radiation exposure limits set
suivantes : (1) il ne doit pas produire de brouillage, et (2) l'utilisateur du forth for uncontrolled equipment and meets the FCC radio
dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, frequency (RF) Exposure Guidelines in Supplement C to OET65.
même si ce brouillage est susceptible de compromettre le fonctionnement This equipment has very low levels of RF energy that it
du dispositif. deemed to comply without maximum permissive
exposure evaluation (MPE).
But it is desirable that it should be installed and
operated with at least 20cm
and more between the radiator and person's body
(excluding extremities: hands, writsts, feet and ankles).
This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.
WARNING
CAUTION
FUJITSU TEN CONFIDENTIAL