DOMISI TECHNOLOGY WTS2000 Programmable Wireless Thermostat User Manual 15 WTS2000 UserMan

DOMISI TECHNOLOGY CO.,LIMITED Programmable Wireless Thermostat 15 WTS2000 UserMan

15_WTS2000 UserMan

Power button( )Pairing button( )CDCLOCKSET HEATTARGET CURRENTCOOLSET OKThis new innovation Programmable Wireless Thermostat is intended for automatic control elctrical heating in winter/cold areaor control electrical cooling devices in summer/hot area.It consisted of 2 componets: a Remote Control unit with integrated tempreature sensor and a Plug in Socket unit.(One remote thermostat control can be with multiple plug in sockets)It will automatically turn on/off heating devices as your preset target temperature or preset time range,to maintain a stable room temperature in order to provide confort and save energy.Temperature range.................. 0~60 °C/32~140 °F Temperature accuracy......................± 1 °C/±1.8 °FCurrent Temp. Resolution........................0.1 °C/°FTARGET Temp. Resolution.........................1 °C/°FPower supply.............................3V(2pcs* AA 1.5V)Max.Range..........................20 meters in open landTransmission Frequency.......................433.92MhzRemote unit demension...................124x82x42mmRemote unit Net weight...................................121gNew design........Wall mount holder & Table standMax.current/Load...............230V/16A/3680W (EU).................230V/13A/3250W (UK).................120V/15A/1800W (US)Plug in socket dimension................132x62x76mmPlug in socket Net weight................................127gLED indicatorRemote thermostat controlPlug in Socket4. SpecificationON/OFFRemark:* After pairing successfully, don’t need to do this pairing when you connectpower next time or even the mains is cut off. The plug in socket willmemorize the pairing code.* If you want to change new remote thermostat control, repeat the abovesteps using other remote thermostat control.* If need to add more plug in sockets in this system,repeat the above steps, one remote thermostat control can control unlimited plug in sockets.2. Pairing codeWTS2000 User Manual Programmable Wireless ThermostatLCD: Indicate working statusLCD: CURRENT temperatureLCD: TARGET temperatureLCD: Display CLOCK/HEAT/ COOL programsDown button( )UP button( )OK button( )OKSET button( )SETON/OFF buttonSocket/PlugRating labelSET OKCLOCKCURRENTTARGET HEATON/OFF11Connect the plug in socket into home socket,and press ON/OFF button for 3 seconds.the LED indicator will be flashing, it is in pairing mode now.62Press Power button to turn on this device, enter into standard heating mode.3Remove the battery cover, and load into 2pcs*AA batteriesobserving the battery polarity, replace cover.3Press Pairing button to send the pairing code at once.The LED indicator will be stop flash and firm lighting. It means the pairing is successful. 452Plug in your heating devices or cooling devices.SET OKCLOCKCURRENT4Now, the remote thermostat control is in standby mode.Only dispaly current temperature and CLOCK.561.Product description3. CLOCK SettingFor example, we set CLOCK as 20:07 at Monday(see Pic.1).SET OKCLOCKCURRENTTARGET HEATSET OKCLOCKCURRENTTARGET HEAT1357 9 10Press SET for 3 seconds,enter into setting modePress UP/DOWN,set weekday (MO-SU)Press OK Press UP/DOWN,choose 12/24HRPress OK Press UP/DOWN,set the hourPress OK Press UP/DOWN,set the minutePress OK,second set to 0Press UP/DOWN,set temperature unit °C/°FPress OK246 8 101234567891011Pic.1Press ON/OFF button to turn off plug in socket,then the remote thermosat control can’t control it, you have to manually turn on plug in socket once again when you want to use it next time, then remote thermostat can control it.88EU UK US Standby mode7Press UP/DOWN button to adjust the TARGET temperature7
SETTARGET CURRENTPress OK for 3 seconds,enter into P1~P8 program settingPress SET,switch between P1~P8, for example we choose P2Press OK ,TARGET is flashingPress UP/DOWN,set the TARGET valuePress OK Press UP/DOWN,choose(MO,TU,WE,TH,FR,SA,SU,MO-FR,MO-SA, SA-SU, MO-SU)Press OK Press UP/DOWN,set hour of P2 ON Press OKPress UP/DOWN,set minute of P2 ONPress OKPress UP/DOWN,set hour of P2 OFFPress OKPress UP/DOWN,set minute of P2 ONPress OK, back to program switching interface, at this time, you can press SET button switch to P1, P3,P4,P5,P6,P7,P8,repeat above steps to set other programs.1. When CURRENT< TARGET, it will be in ON status,the flame symbol ( )will display in LCD,turn on connected heaters,start to warm the room, so the room temperature is rising.2. As current temp. rising, CURRENT=TARGET, it will be in OFF status, the flame symbol( )will disappear,remote thermostat will send OFF commands to turn off all connected heaters.3. The current temperature will be decreasing, when current temp. decreased 1°C/1.8°F, it will turn on all connected heaters once again, then infinite loop.8. Working principleSo in the HEATING mode, remote thermostat control will automatically keep the room temp. in below range: Target Temp.-1°C/1.8°F ≥ Room Temp. ≥Target Temp. Heating Mode:9. Other functionsChildren LockIn any mode(except standby mode),child lock will be activated if no activityfor 10 minutes, the child lock symbol( ) will appear in the top of LCD display. Press DOWN button for 3 seconds to disengaged child lock.1. When CURRENT> TARGET, it will be in ON status,the snow symbol ( )will display in LCD display,turn on connected cooling devices, start to cool down the room, so the room temperature is decreasing.2. As current temp. rising, CURRENT=TARGET, it will be in OFF status, snow symbol( )will disappear from LCD display,remote thermostat will send OFF commands to turn off all connected cooling devices3. The current temperature will be rising, when current temp. increased 1°C/1.8°F, it will turn on all connected cooling devices once again, then infinite loop.So in the COOLING mode, remote thermostat control will automatically keep the room temp. in below range: Target Temp. ≤ Room Temp. ≤ Target Temp.+1°C/1.8°FCooling Mode:5. Program settingPic.2Pic.3For example, we set as 30°C,MO-FR,18:00~23:00,show in Pic.2 and Pic.3It means, from Monday to Friday, 18:00 to 23:00, TARGET temperature change to 32°C,in other time, keep in 25°C(Standard heating mode,see Pic.1)SETTARGET CURRENT6. Turn on/Turn off P1~P8 programs 7. How to switch Heating/Cooling modeTARGET CURRENTCLOCKPic.4ResetDuring heating/cooling mode,Press UP&DOWN button at the same time for 3 seconds.The green backlight will flash 3 times, all setting will be deleted, and back to factory setting.SET OKCLOCKCURRENTTARGET HEAT123456789101112131415Remark:* P1~P4, it is period for HEATING, P5~P8, it is period for COOLING* During setting, if you don’t want to set, press POWER button to exit.* During setting, if no operation for 10 seconds,automatically save and exit.135 7 9 1113 152468 10 1214SET OKTARGET CURRENTCLOCK312Press SET, enter programming ON/OFF selection,ON or OFF(default) symbol is flashing.Press UP/DOWN to select the ON,or OFF.ON: turn on all programming at once,P display next to the time,the P1~P8 program is working(see Pic.4).OFF: turn off all programming at once,P disappear, only standard heating or cooling is working.Press OK123SET OKCLOCKCURRENTTARGET HEAT32Press UP for 3 seconds,enter selection between heating (default) and cooling modePress UP/DOWN,select Flame( ) or Snow symbol( )Flame represents HEATING modeSnow represents COOLING modePress OK 11231SET OKCLOCKCURRENTTARGET HEAT26112SET OKCLOCKTARGET CURRENTCooling mode
FCC Warning: FCC ID: 2AQQ7-WTS2000 Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter

Navigation menu