DOMISI TECHNOLOGY WTS2000 Programmable Wireless Thermostat User Manual 15 WTS2000 UserMan

Download:
Mirror Download [FCC.gov]
Document ID	3973961
Application ID	saa3xImnxHCfLp6nea3Fwg==
Document Description	15_WTS2000 UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	160.1kB (2001261 bits)
Date Submitted	2018-08-22 00:00:00
Date Available	2018-08-22 00:00:00
Creation Date	2018-08-08 14:57:26
Producing Software	Adobe Acrobat Pro DC 18.11.20055
Document Lastmod	2018-08-21 17:02:28
Document Title	15_WTS2000 UserMan
Document Creator	Adobe Acrobat Pro DC 18.11.20055

User Manual
WTS2000
Programmable Wireless Thermostat
This new innovation Programmable Wireless Thermostat is
intended for automatic control elctrical heating in winter/cold area
or control electrical cooling devices in summer/hot area.
2. Pairing code
ON/OFF
3. CLOCK Setting
SET
1.Product description
CURRENT
CURRENT
TARGET
LCD: Indicate working status
SET
OK
TARGET
Standby mode
Pairing button(
Down button(
UP button(
OK button( OK )
SET button( SET )
Power button(
Plug in Socket
LED indicator
ON/OFF button
Rating label
ON/OFF
Socket/Plug
EU UK US
SET
LCD: TARGET temperature
OK
CLOCK HEAT
CLOCK
LCD: CURRENT temperature
SET
TARGET
CLOCK HEAT
OK
SET
OK
2 4 6 8 10
Remote thermostat control
LCD: Display CLOCK/HEAT/
COOL programs
TARGET
CLOCK HEAT
It will automatically turn on/off heating devices as your preset target
temperature or preset time range,to maintain a stable room
temperature in order to provide confort and save energy.
SET CLOCK HEAT COOL CD
CURRENT
It consisted of 2 componets: a Remote Control unit with integrated
tempreature sensor and a Plug in Socket unit.
(One remote thermostat control can be with multiple plug in sockets)
CURRENT
CURRENT
OK
Connect the plug in socket into home socket,
and press ON/OFF button for 3 seconds.
the LED indicator will be flashing, it is in pairing mode now.
Plug in your heating devices or cooling devices.
Remove the battery cover, and load into 2pcs*AA batteries
observing the battery polarity, replace cover.
Now, the remote thermostat control is in standby mode.
Only dispaly current temperature and CLOCK.
Press Power button to turn on this device,
enter into standard heating mode.
Press Pairing button to send the pairing code at once.
The LED indicator will be stop flash and firm lighting.
It means the pairing is successful.
Press UP/DOWN button to adjust the TARGET temperature
Press ON/OFF button to turn off plug in socket,then the remote
thermosat control can’t control it, you have to manually turn on
plug in socket once again when you want to use it next time,
then remote thermostat can control it.
Remark:
* After pairing successfully, don’t need to do this pairing when you connect
power next time or even the mains is cut off. The plug in socket will
memorize the pairing code.
* If you want to change new remote thermostat control, repeat the above
steps using other remote thermostat control.
* If need to add more plug in sockets in this system,repeat the above steps,
one remote thermostat control can control unlimited plug in sockets.
3 5 7 9 10
Pic.1
1 Press SET for 3 seconds,enter into setting mode
2 Press UP/DOWN,set weekday (MO-SU)
3 Press OK
4 Press UP/DOWN,choose 12/24HR
5 Press OK
6 Press UP/DOWN,set the hour
7 Press OK
8 Press UP/DOWN,set the minute
9 Press OK,second set to 0
10 Press UP/DOWN,set temperature unit °C/°F
11 Press OK
For example, we set CLOCK as 20:07 at Monday(see Pic.1).
4. Specification
Temperature range.................. 0~60 °C/32~140 °F
Temperature accuracy......................± 1 °C/±1.8 °F
Current Temp. Resolution........................0.1 °C/°F
TARGET Temp. Resolution.........................1 °C/°F
Power supply.............................3V(2pcs* AA 1.5V)
Max.Range..........................20 meters in open land
Transmission Frequency.......................433.92Mhz
Remote unit demension...................124x82x42mm
Remote unit Net weight...................................121g
New design........Wall mount holder & Table stand
Max.current/Load...............230V/16A/3680W (EU)
.................230V/13A/3250W (UK)
.................120V/15A/1800W (US)
Plug in socket dimension................132x62x76mm
Plug in socket Net weight................................127g
8. Working principle
Heating Mode:
1. When CURRENT< TARGET, it will be in ON status,the flame symbol
)will display in LCD,turn on connected heaters,start to warm the
room, so the room temperature is rising.
2. As current temp. rising, CURRENT=TARGET, it will be in OFF status,
the flame symbol( )will disappear,remote thermostat will send OFF
commands to turn off all connected heaters.
3. The current temperature will be decreasing, when current temp.
decreased 1°C/1.8°F, it will turn on all connected heaters once again,
then infinite loop.
6. Turn on/Turn off P1~P8 programs
5. Program setting
CURRENT
CURRENT
TARGET
CURRENT
TARGET
TARGET
CLOCK HEAT
CLOCK
SET
OK
SET
OK
4 6 8 10 1214
1 3 5 7 9 1113 15
Press OK for 3 seconds,enter into P1~P8 program setting
Press SET,switch between P1~P8, for example we choose P2
Press OK ,TARGET is flashing
So in the HEATING mode, remote thermostat control will automatically
keep the room temp. in below range:
CLOCK
Pic.4
Press SET, enter programming ON/OFF selection,
ON or OFF(default) symbol is flashing.
Press UP/DOWN to select the ON,or OFF.
Cooling Mode:
1. When CURRENT> TARGET, it will be in ON status,the snow symbol
)will display in LCD display,turn on connected cooling devices,
start to cool down the room, so the room temperature is decreasing.
2. As current temp. rising, CURRENT=TARGET, it will be in OFF status,
snow symbol(
)will disappear from LCD display,remote thermostat
will send OFF commands to turn off all connected cooling devices
3. The current temperature will be rising, when current temp. increased
1°C/1.8°F, it will turn on all connected cooling devices once again,
then infinite loop.
ON: turn on all programming at once,P display next to
the time,the P1~P8 program is working(see Pic.4).
Press UP/DOWN,set the TARGET value
OFF: turn off all programming at once,P disappear,
only standard heating or cooling is working.
Press OK
Press UP/DOWN,choose(MO,TU,WE,TH,FR,SA,SU,MO-FR,
MO-SA, SA-SU, MO-SU)
So in the COOLING mode, remote thermostat control will automatically
keep the room temp. in below range:
Press OK
Target Temp. ≤ Room Temp. ≤ Target Temp.+1°C/1.8°F
CURRENT
7 Press OK
8 Press UP/DOWN,set hour of P2 ON
Pic.2
9 Press OK
10 Press UP/DOWN,set minute of P2 ON
11 Press OK
12 Press UP/DOWN,set hour of P2 OFF
Pic.3
13 Press OK
14 Press UP/DOWN,set minute of P2 ON
15 Press OK, back to program switching interface, at this time, you
TARGET
7. How to switch Heating/Cooling mode
SET
CURRENT
TARGET
TARGET
TARGET
CLOCK HEAT
CLOCK
SET
OK
SET
OK
SET
can press SET button switch to P1, P3,P4,P5,P6,P7,P8,
repeat above steps to set other programs.
Remark:
* P1~P4, it is period for HEATING, P5~P8, it is period for COOLING
* During setting, if you don’t want to set, press POWER button to exit.
* During setting, if no operation for 10 seconds,automatically save and exit.
9. Other functions
CURRENT
CURRENT
For example, we set as 30°C,MO-FR,18:00~23:00,show in Pic.2 and Pic.3
It means, from Monday to Friday, 18:00 to 23:00, TARGET temperature
change to 32°C,in other time, keep in 25°C(Standard heating mode,see Pic.1)
Target Temp.-1°C/1.8°F ≥ Room Temp. ≥Target Temp.
Cooling mode
Press UP for 3 seconds,enter selection between
1heating (default) and cooling mode
Press UP/DOWN,select Flame( ) or Snow symbol(
Flame represents HEATING mode
Snow represents COOLING mode
Press OK
Children Lock
In any mode(except standby mode),
child lock will be activated if no activity
for 10 minutes, the child lock symbol( )
will appear in the top of LCD display.
Press DOWN button for 3 seconds to
disengaged child lock.
Reset
During heating/cooling mode,
Press UP&DOWN button at the
same time for 3 seconds.
The green backlight will flash 3 times,
all setting will be deleted, and back to
factory setting.
CURRENT
TARGET
CLOCK HEAT
SET
OK
26
FCC Warning:
FCC ID: 2AQQ7-WTS2000
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2018:08:08 14:57:26+08:00
Creator                         : Adobe Acrobat Pro DC 18.11.20055
Modify Date                     : 2018:08:21 17:02:28+08:00
Title                           : 
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Metadata Date                   : 2018:08:21 17:02:28+08:00
Creator Tool                    : Adobe Acrobat Pro DC 18.11.20055
Format                          : application/pdf
Document ID                     : uuid:d7105d85-4c54-42cb-a60f-07ac4175b5de
Instance ID                     : uuid:784c4bed-d8e1-42dc-9e33-e4da9faf180d
Producer                        : Adobe Acrobat Pro DC 18.11.20055
Page Count                      : 3
For                             : Administrator,
Bounding Box                    : 83 -1291 1119 -33
Container Version               : 11
Creator Version                 : 16

EXIF Metadata provided by EXIF.tools