DONGGUAN SMART HERO ELECTRONIC CO WLDB2324TX WIRELESS DOOR CHIME PUSH BUTTON User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2605668
Application ID	qlHkEOdzE3OULNUG8iVcaw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	29.84kB (372968 bits)
Date Submitted	2015-05-06 00:00:00
Date Available	2015-05-06 00:00:00
Creation Date	2015-03-10 12:18:57
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2015-04-29 09:02:23
Document Title	User manual
Document Creator	Adobe InDesign CC 2014 (Macintosh)

Use and Care
Guide
#4x3/4
TOOLS REQUIRED
HARDWARE INCLUDED
#6x3/4
#4x3/4
Phillips screwdriver
Flat Head Screwdriver
Drill
(2) #4 x 3/4 in. Screws
#4x1 White Zinc
(1) Adhesive Sticker
#6x1 Self Tapping
#6x3/4
5/64 in. Drill Bit
ScrewHardware.ai
Installation
#4x1 White Zinc
ACTIVATING THE PUSH BUTTON BATTERY
216595Inst.ai
□□ Remove the front cover of the push button by inserting a flat
head screwdriver in the slot on the bottom of the button and
pulling up slightly.
□□ Remove the plastic tab from the battery compartment to
allow connection to the terminal.
□□ Snap the front cover onto the base by first hooking the tops
together, then snapping the base on.
□□ Repeat for second button if applicable.
SYNCING THE CHIME AND PUSH BUTTON
□□ Follow the instructions included in the chime.
#6x1 Self Tapping
POWERING THE CHIME
□□ Install the chime batteries or plug in the chime, following the
instructions included in the chime.
ScrewHardware.ai
MOUNTING THE PUSH BUTTON
□□ Remove the front cover from the base by following step 1.
□□ Mount the push button base to a clean wall or door jamb
with included screws or mounting tape. If mounting with
screws, predrill a pilot hole through the push button base in
the desired location using a 5/64 in. drill bit.
□□ Snap the push button cover onto the base by first hooking
the tops together, then snapping the base on.
216595Inst.ai
HOMEDEPOT.COM
Please contact 1-855-556-1852
for further assistance.
216595Inst.ai
Safety Information
WARNING: Keep batteries out of reach of
children.
Specifications
216593
Doorbell Type
Wireless
Number of Push Buttons
Included Hardware
(2) #4 x ¾ in. Screws and (1) 18x31mm Adhesive Sticker
Finished Product Dimensions
2.518 in. Height x 1.268 in. Width x .79 in. Depth
Power Source
CR2032 Battery (included)
Finish Color
Black
Lighted Button
Yes
216594
Doorbell Type
Wireless
Number of Push Buttons
Included Hardware
(2) #4 x ¾ in. Screws and (1) 18x31mm Adhesive Sticker
Finished Product Dimensions
2.518 in. Height x 1.268 in. Width x .79 in. Depth
Power Source
CR2032 Battery (included)
Finish Color
Brass
Lighted Button
Yes
216595
Doorbell Type
Wireless
Number of Push Buttons
Included Hardware
(2) #4 x ¾ in. Screws and (1) 18x31mm Adhesive Sticker
Finished Product Dimensions
2.518 in. Height x 1.268 in. Width x .79 in. Depth
Power Source
CR2032 Battery (included)
Finish Color
White
Lighted Button
Yes
Troubleshooting
Problem
Possible Cause
Solution
Chime does not sound when push button is pressed.
Push button battery has not been
activated.
Confirm the activation tab has been removed and
the battery is seated properly in the button.
The chime and push button are out
of transmission range.
Move the chime closer to the push button
location. Ensure there are no metallic objects or
concrete walls hindering the signal.
Push button battery needs to be
replaced.
Replace the push button battery with a CR2032
Lithium Coin battery.
An outside signal is interfering with
the signal between the chime and
push button.
Resync the chime and push button following the
steps in the instructions.
Chime is sounding without the push button being pushed.
Warranty
WHAT IS COVERED
The Warrantor is pleased to extend this Warranty to you, the original consumer/end user (“Consumer”) of the doorbell products and listed by model
number below (“Doorbell Product”). This Warranty is valid for any Doorbell Product used in standard residential applications, and may not be assigned or
transferred by you.
For a period of one (1) year from the date of purchase, Warrantor, at its sole option, will repair, replace or refund the purchase price for any Doorbell Product
used in a standard residential application that malfunctions due to factory defective parts or defective workmanship in the manufacture or assembly of the
Doorbell Product.
WHAT IS NOT COVERED
Warrantor shall have no further liability or obligation except as expressly stated herein.
This Warranty does not apply to any Doorbell Product that has been abused, misused, modified, subjected to abnormal use conditions, stored improperly
prior to installation, or otherwise used in any way not intended by Warrantor.
HOMEDEPOT.COM
Please contact 1-855-556-1852 for further assistance.
This Warranty is limited to repair, replacement or refund as set forth above and any additional reimbursement is expressly excluded from this Warranty,
including but not limited to reimbursement for inconvenience, installation costs, loss of use, return shipping charges, and batteries or other expendable
items.
If a claim is made under this Warranty on a product that is no longer available, Warrantor reserves the right to provide a similar product of comparable
quality and value.
To make a claim under this Warranty, the Consumer must, within ninety (90) days of actual or constructive knowledge of damage covered by this Warranty,
return the product to your local The Home Depot store, or call Customer Service at 1-855-556-1852.
Warrantor does not make any implied warranty of merchantability or fitness of the product for a particular purpose. There are no other warranties that
extend beyond the description on the face hereof.
This Warranty gives you specific legal rights and you may have additional rights under applicable law.
Contact the Customer Service Team at 1-855-556-1852 or visit www.HomeDepot.com.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée
aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
HOMEDEPOT.COM
Please contact 1-855-556-1852 for further assistance.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Create Date                     : 2015:03:10 12:18:57-04:00
Metadata Date                   : 2015:04:29 09:02:23+08:00
Modify Date                     : 2015:04:29 09:02:23+08:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Instance ID                     : uuid:c27e6436-1175-4eac-9742-f0ecbf64b6ff
Original Document ID            : xmp.did:4B0D96F99873E01196A0E7EE2F4866E3
Document ID                     : xmp.id:54e217a7-d229-4436-b448-286d8adc2c9e
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:e194e099-c21a-4e6a-a4e5-b2e89ae3bc71
Derived From Document ID        : xmp.did:7dea613d-aee3-4bb2-85e5-9d697bca7050
Derived From Original Document ID: xmp.did:4B0D96F99873E01196A0E7EE2F4866E3
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2015:03:10 12:18:57-04:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Slug Family                     : Arial
Slug Version                    : 5.01.2
Slug Outline File Size          : 0
Slug Kerning Checksum           : 0
Slug Foundry                    : Monotype Typography
Slug Font Kind                  : OpenType - TT
Slug Checksum                   : 2169611603
Slug Post Script Name           : ArialMT
Slug Font Sense 12 Checksum     : 2169611603
Page Count                      : 3
Creator                         : Adobe InDesign CC 2014 (Macintosh)

EXIF Metadata provided by EXIF.tools