Danfoss Randall TP75RF TP 75 RF User Manual Instruction Guide

Danfoss Randall Ltd TP 75 RF Instruction Guide

Contents

Instruction Guide

1SPECIFICATIONRadio Controlled Programmable Room ThermostatReceiver Module for TP75-RF (Independently Surface Mounted)Supply Voltage 24 VacConstruction BS EN 60730-2-9Maximum Ambient Temperature 114°f (45°C)Switch Type RX1 - 1 x SPDT, type 1BRX2 - 1 x SPDT, 1 x SPST, type 1BRX3 - 1 x SPDT, 2 x SPST, type 1BSwitch Rating 3 (1) A, (Total current)IP Rating IP 40Max. Range 30 metresOperating Frequency 433.92 MHzFCC Identifier PO7 TP75RF1. 2. 3. 4.30 VDS (typical)TP75-RF, WP75-RF, RX-1, RX-2, RX-3 Instructions TP75-RF/WP75-RF RX-1, RX-2, RX-3Wiring DetailsCOM ON OFFABC234ElectronicsONCOMOFF24vCom3ACOM ON OFFABC234Electronics3AZONE 1 ONZONE 2 ONCOMZONE 1 OFFZONE 2 ONZONE 1 ONZONE 3 ONElectronics3ACOMZONE 1 OFFRX1 RX2 RX324vLive24vCom24vLive 24vCom24vLiveABC23456FCC Notice: This device complies with Pt 15 of the FCCrules. Operation is subject to the following conditions:1) This device may not cause harmful interference2) This device must accept any interference receivedincluding that which may cause undesired operation.
25 Min. (max)Commissioning InstructionsStep 1 TP75-RF Press and hold the "LEARN" button for 3 secondsStep 2 RX1 Press and hold buttons PROG and CH1 for 3 secondsStep 3 RX2 / RX3 For RX2 or RX3 repeat steps 1 and 2 for each thermostat and channel 433.92 MHzBattery Compartment Flap loweredTP75-RF/WP75-RF RX-1, RX-2, RX-3Use only during programmingReceiver status LED,lit when receiveingEmergency ON button, press if communicationfails, turns on heat, returns to AUTO whencommunication is re-establishedZone status LEDs, lit when ONDanfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material, and reserves the right to alter its products withoutnotice. This also applies to products already on order provided that such alterations can be made without subsequent changes being necessary in specificationsalready agreed.Part No: 34049 Iss 02 06/015. 6.Danfoss Comfort and Building Controls3435 Box Hill Corporate Center DriveSuite CAbingdon, Maryland 21009USATel: 00 1 443 512 0266 Fax: 00 1 443 512 0270Danfoss Mfg Co Ltd7880 Tranmere DriveMississaugaOntarioCanadaTel: 001 905 676 6000 Fax: 001 905 676 0279

Navigation menu