Danfoss Randall TP75RF TP 75 RF User Manual Instruction Guide
Danfoss Randall Ltd TP 75 RF Instruction Guide
Contents
- 1. User Guide
- 2. Installation Guide
- 3. Instruction Guide
Instruction Guide
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 160804 |
| Application ID | ve/7vVcykQGdDumqI2KpTw== |
| Document Description | Instruction Guide |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 21.54kB (269251 bits) |
| Date Submitted | 2001-07-20 00:00:00 |
| Date Available | 2001-09-17 00:00:00 |
| Creation Date | 2001-06-07 09:44:16 |
| Producing Software | Acrobat Distiller 4.05 for Windows |
| Document Lastmod | 2001-06-07 09:44:16 |
| Document Title | Instruction Guide |
TP75-RF, WP75-RF, RX-1, RX-2, RX-3 Instructions TP75-RF/WP75-RF RX-1, RX-2, RX-3 30 VDS (typical) SPECIFICATION FCC Notice: This device complies with Pt 15 of the FCC rules. Operation is subject to the following conditions: 1) This device may not cause harmful interference 2) This device must accept any interference received including that which may cause undesired operation. Radio Controlled Programmable Room Thermostat Receiver Module for TP75-RF (Independently Surface Mounted) Supply Voltage 24 Vac Construction BS EN 60730-2-9 Maximum Ambient Temperature 114°f (45°C) Switch Type RX1 - 1 x SPDT, type 1B RX2 - 1 x SPDT, 1 x SPST, type 1B RX3 - 1 x SPDT, 2 x SPST, type 1B Switch Rating 3 (1) A, (Total current) IP Rating IP 40 Max. Range 30 metres Operating Frequency 433.92 MHz FCC Identifier PO7 TP75RF 1. 2. 3. 4. OFF ON COM 24v Live ON OFF 3A 3A 24v Com COM 24v Com 24v Live ZONE 3 ON OFF ZONE 2 ON ON ZONE 1 OFF COM ZONE 1 ON Electronics ZONE 1 OFF Electronics ZONE 1 ON RX3 Electronics COM RX2 ZONE 2 ON RX1 COM Wiring Details 3A 24v Com 24v Live 5. 6. TP75-RF/WP75-RF RX-1, RX-2, RX-3 433.92 MHz 5 Min. (max) Battery Compartment Flap lowered Commissioning Instructions Step 1 TP75-RF Press and hold the "LEARN" button for 3 seconds Step 2 RX1 Press and hold buttons PROG and CH1 for 3 seconds Step 3 RX2 / RX3 For RX2 or RX3 repeat steps 1 and 2 for each thermostat and channel Zone status LEDs, lit when ON Receiver status LED, lit when receiveing Use only during programming Emergency ON button, press if communication fails, turns on heat, returns to AUTO when communication is re-established Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material, and reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed. Danfoss Comfort and Building Controls Danfoss Mfg Co Ltd 3435 Box Hill Corporate Center Drive Suite C Abingdon, Maryland 21009 USA Tel: 00 1 443 512 0266 Fax: 00 1 443 512 0270 7880 Tranmere Drive Mississauga Ontario Canada Tel: 001 905 676 6000 Fax: 001 905 676 0279 Part No: 34049 Iss 02 06/01
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Create Date : 2001:06:07 09:44:16 Producer : Acrobat Distiller 4.05 for Windows Modify Date : 2001:06:07 09:44:16+01:00 Page Count : 2EXIF Metadata provided by EXIF.tools