Data Sciences PTDM1 Digital Animal Implant Transceiver for use in Medical Research Laboratory Environments User Manual Telemetry Transmitters Users Guide
Data Sciences International Inc Digital Animal Implant Transceiver for use in Medical Research Laboratory Environments Telemetry Transmitters Users Guide
Contents
- 1. Users Manual
- 2. Users Manual Warning Statement
Users Manual Warning Statement
Telemetry Transmitter User Guide Appendix – Compliance Statement
Émetteur de télémesure Guide de l'utilisateur Annexe -
Déclaration de conformité (Projet)
Part Number (Référence) 000380-001 Rev 11
Thank you for purchasing DSI Telemetry Transmitters. DSI is required to provide this guide
because the devices transmit information using radiofrequency waves. It contains details on the
intended use of the transmitters, 1999/5/EC (R&TTE Directive) conformity, FCC compliance,
and proper transmitter disposal. Please read this guide carefully and retain for future reference.
For additional information on the product warranty, exchanges, and use, please visit
www.datasci.com.
Intended Use:
DSI Telemetry Transmitters are intended for measuring physiologic parameters in laboratory
animals. Transmitters range in size to accommodate a wide range of research animals and the
transmitter shape allows for subcutaneous or intraperitoneal placement.
Declaration of Conformity:
These transmitters conform to the requirements of 1999/5/EC (R&TTE Directive). The
declaration of conformity may be viewed on the Internet at www.datasci.com.
Use of 18 MHz devices may be subject to licensing in the following countries. For licensing
options please contact the national spectrum management authorities:
Slovak Republic
Use of 868 MHz devices may be subject to licensing in the following countries. For licensing
options please contact the national spectrum management authorities:
Greece Norway Spain Sweden Netherlands
FCC Statement:
FCC ID _
455 kHz Implant FCCID:MHA02DSI
These devices comply with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference and (2) this device must accept
any interference that may cause undesired operation.
This Category II radio communication device complies with Industry Canada Standard RSS-310.
Ce dispositif de radio communication de catégorie II respecte la norme CNR-310 d’Industrie
Canada.
FCC ID IC ID _
8 MHz Implant FCCID:MHATMS1 IC:5681A-MHATMS1
18 MHz Implant FCCID:MHATMS2 IC:5681A-MHATMS2
These devices comply with Part 15 of the FCC rules and Industry Canada (IC) RSS 210.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference and (2) this device must accept any interference that may cause undesired operation.
Telemetry Transmitter User Guide Appendix – Compliance Statement
Émetteur de télémesure Guide de l'utilisateur Annexe -
Déclaration de conformité (Projet)
Part Number (Référence) 000380-001 Rev 11
FCC ID IC ID _
916 MHz Implant (L Series) FCCID: MHATRUDSI IC: 5681A-MHATRUDSI
FCC ID IC ID _
916 MHz Implant (M Series) FCCID:MHAPTDM1 IC:5631A-MHAPTDM1
These devices comply with Part 15 of the FCC rules and Industry Canada (IC) RSS 210.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference and (2) this device must accept any interference that may cause undesired operation.
Ces appareils sont conformes à la partie 15 des règles de la FCC et de l'Industrie du Canada (IC)
RSS 210. Son fonctionnement est soumis aux deux conditions suivantes: (1) Cet appareil ne doit
pas causer d'interférences nuisibles et (2) cet appareil doit accepter toute interférence pouvant
causer un fonctionnement indésirable.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
REMARQUE: Cet équipement a été testé et trouvé conforme aux limites pour une classe A des
appareils numériques, conformément à la partie 15 des règles de la FCC. Ces limites sont conçues
pour fournir une protection raisonnable contre les interférences nuisibles lorsque l'équipement est
utilisé dans un environnement commercial. Cet équipement génère, utilise et peut émettre une
énergie de radiofréquence et, s'il n'est pas installé et utilisé conformément au manuel
d'instruction, peut causer des interférences nuisibles aux communications radio. L'utilisation de
cet équipement dans une zone résidentielle est susceptible de provoquer des interférences
nuisibles, auquel cas l'utilisateur sera tenu de corriger les interférences à ses propres frais.
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Attention: Les changements ou modifications non expressément approuvés par la partie
responsable de la conformité pourraient annuler l'autorité de l'utilisateur à utiliser cet équipement.
Transmitter Disposal
Transmitters contain a primary battery cell which may contain lithium. The battery cell may be
removed by destructively dismantling the transmitter. Recycle the battery cell and remaining
electronics in accordance with applicable federal, state, and local regulations.
CAN ICES-3A/NMB-3A
Elimination émetteur
Les émetteurs contiennent une cellule électrochimique primaire qui peut contenir du lithium. La
cellule de batterie peut être retirée par démontage destructive de l'émetteur. Recyclez la pile et
l'électronique restante conformément aux lois fédérales, provinciales et locales en vigueur.