DawnSun Electronic Technology ZhongShan TX007R1 FAN REMOTE CONTROLLER User Manual

DawnSun Electronic Technology.Co.,Ltd.ZhongShan FAN REMOTE CONTROLLER Users Manual

Manual

FCC ID LabelMODEL: TX007-NTX007-LTX007-STX007-LSTX007-R1TX007-LRFCC ID: A25-TX007R1FCC ID: A25-TX007R122mm2mm
OPERATION INSTRUCTION①②③④FrontBack Back:,◎◎:.1.Fan speed control button To control theceiling fan speed HIGH MEDIUM,LOW.2.FAN/OFF button: Turn off the fan;Press and hold for 5 secondsto enter Light Delay Off mode.3.LIGHT ON/OFF/DIMMER button To control lighton,off and dimmer:,◎◎:.1.Fan speed control button To control theceiling fan speed HIGH MEDIUM,LOW.2.FAN/OFF button: Turn off the fan;Press and hold for 5 secondsto enter Light Delay Off mode.3.LIGHT ON/OFF/DIMMER button To control lighton,off and dimmerTact Switch: Press to learn code.4.Note:Install the 12-volt battery( included) to the remote control.TX007-N TX007-L12V12VMODEL: TX007-NTX007-LTX007-STX007-LSTX007-R1TX007-LR
12V12V④④④④BackBackBackBack:,◎◎:.1.Fan speed control button To control theceiling fan speed HIGH MEDIUM,LOW.2.FAN/OFF button: Turn off the fan;Press and hold for 5 secondsto enter Light Delay Off mode.3.LIGHT ON/OFF/DIMMER button To control lighton,off and dimmer4.DIP Switch: Slide DIP switches to the same positionas set on your receiver. The code onreceiver and transmitter must be the same.:,◎◎:.1.Fan speed control button To control theceiling fan speed HIGH MEDIUM,LOW.2.FAN/OFF button: Turn off the fan;Press and hold for 5 secondsto enter Light Delay Off mode.3.LIGHT ON/OFF/DIMMER button To control lighton,off and dimmerExtended Function Switch4.:,◎◎:.1.Fan speed control button To control theceiling fan speed HIGH MEDIUM,LOW.2.FAN/OFF button: Turn off the fan;Press and hold for 5 secondsto enter Light Delay Off mode.3.LIGHT ON/OFF/DIMMER button To control lighton,off and dimmerTact Switch: Press to learn code.5.DIP Switch: Slide DIP switches to the same positionas set on your receiver. The code onreceiver and transmitter must be the same.4.:,◎◎:.1.Fan speed control button To control theceiling fan speed HIGH MEDIUM,LOW.2.FAN/OFF button: Turn off the fan;Press and hold for 5 secondsto enter Light Delay Off mode.3.LIGHT ON/OFF/DIMMER button To control lighton,off and dimmerTact Switch: Press to learn code.5.Extended Function Switch .4.TX007-STX007-R1TX007-LSTX007-LROPERATION INSTRUCTION⑤⑤12V12VNote:Install the 12-volt battery( included) to the remote control.
●Products shall be subject to any changes without additional notices dueto DawnSun will keep innovation and optimization on the products.FCC STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1)This device may not cause harmful interferenceThis device must accept any interference received including interference that maycause undesired operation.2. Changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.,(2)NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and use in accordance withthe instructions, may cause harmful interference to radio communications.However there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:1.Reorient or relocate the receiving antenna.2.Increase the separation between the equipment and receiver.3.Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.4.Consultthedealeroranexperiencedradio/TVtechnicianforhelp.,OPERATION INSTRUCTIONCaution: Any changes or modifications not expressly approved by the party responsible for compliance could void theuser's authority to operate this equipment.

Navigation menu