DawnSun Electronic Technology ZhongShan TX007R1 FAN REMOTE CONTROLLER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1722074
Application ID	W7hJr/GwrLPfmKXPOc9zEg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.94kB (186781 bits)
Date Submitted	2012-06-13 00:00:00
Date Available	2012-06-14 00:00:00
Creation Date	2012-06-11 14:14:15
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2012-06-11 14:14:15
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	zyj

FCC ID Label
MODEL: TX007-N
TX007-L
TX007-S
TX007-LS
TX007-R1
TX007-LR
2 2mm
FCC ID: A25-TX007R1 2mm
FCC ID: A25-TX007R1
OPERATION INSTRUCTION
MODEL: TX007-N
TX007-L
TX007-S
TX007-LS
TX007-R1
TX007-LR
①
③
②
Front
TX007-L
TX007-N
12V
12V
④
Back
Back
1.Fan speed control button : To control the
ceiling fan speed HIGH , MEDIUM,LOW.
2.FAN/OFF button: ◎Turn off the fan;
◎Press and hold for 5 seconds
to enter Light Delay Off mode.
3.LIGHT ON/OFF/DIMMER button : To control light
on,off and dimmer .
1.Fan speed control button : To control the
ceiling fan speed HIGH , MEDIUM,LOW.
2.FAN/OFF button: ◎Turn off the fan;
◎Press and hold for 5 seconds
to enter Light Delay Off mode.
3.LIGHT ON/OFF/DIMMER button : To control light
on,off and dimmer .
4. Tact Switch: Press to learn code.
Note:Install the 12-volt battery( included) to the remote control.
OPERATION INSTRUCTION
TX007-S
TX007-LS
12V
12V
④
⑤
④
Back
Back
1.Fan speed control button : To control the
ceiling fan speed HIGH , MEDIUM,LOW.
2.FAN/OFF button: ◎Turn off the fan;
◎Press and hold for 5 seconds
to enter Light Delay Off mode.
3.LIGHT ON/OFF/DIMMER button : To control light
on,off and dimmer .
4.DIP Switch: Slide DIP switches to the same position
as set on your receiver. The code on
receiver and transmitter must be the same.
TX007-R1
1.Fan speed control button : To control the
ceiling fan speed HIGH , MEDIUM,LOW.
2.FAN/OFF button: ◎Turn off the fan;
◎Press and hold for 5 seconds
to enter Light Delay Off mode.
3.LIGHT ON/OFF/DIMMER button : To control light
on,off and dimmer .
4. Tact Switch: Press to learn code.
5. DIP Switch: Slide DIP switches to the same position
as set on your receiver. The code on
receiver and transmitter must be the same.
TX007-LR
12V
12V
④
⑤
④
Back
Back
1.Fan speed control button : To control the
ceiling fan speed HIGH , MEDIUM,LOW.
2.FAN/OFF button: ◎Turn off the fan;
◎Press and hold for 5 seconds
to enter Light Delay Off mode.
3.LIGHT ON/OFF/DIMMER button : To control light
on,off and dimmer
4. Extended Function Switch .
1.Fan speed control button : To control the
ceiling fan speed HIGH , MEDIUM,LOW.
2.FAN/OFF button: ◎Turn off the fan;
◎Press and hold for 5 seconds
to enter Light Delay Off mode.
3.LIGHT ON/OFF/DIMMER button : To control light
on,off and dimmer .
4. Tact Switch: Press to learn code.
5. Extended Function Switch .
Note:Install the 12-volt battery( included) to the remote control.
OPERATION INSTRUCTION
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1)This device may not cause harmful interference .
(2) This device must accept any interference received , including interference that may
cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and use in accordance with
the instructions, may cause harmful interference to radio communications.
However , there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1.Reorient or relocate the receiving antenna.
2.Increase the separation between the equipment and receiver.
3.Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4.Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
●Products shall be subject to any changes without additional notices due
to DawnSun will keep innovation and optimization on the products.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2012:06:11 14:14:15+08:00
Create Date                     : 2012:06:11 14:14:15+08:00
Format                          : application/pdf
Title                           : <545830303720CFB5C1D0CAB9D3C3CBB5C3F7CAE92E636472>
Creator                         : zyj
Document ID                     : uuid:7baeb98a-3aeb-4f64-927c-fc818a259e45
Instance ID                     : uuid:852b6b1f-7006-4190-b0a5-58beeead4597
Page Count                      : 4
Author                          : zyj

EXIF Metadata provided by EXIF.tools