Deister Electronic AMANTAGCOMPACT Compact Reader User Manual 2007 08 08 pa amantag compact em

Deister Electronic GmbH Compact Reader 2007 08 08 pa amantag compact em

UserManual.wiki >

Deister Electronic >

AMANTAGCOMPACT User Manual

user manual

compactWiring & Installation Instructions V04/09/07

© Copyright 2007 by deister electronic GmbHAll rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of deister electronic GmbH.deister electronic GmbH reserves the right to make changes to any and all parts of this documentation without obligation to notify any person or entity of such changes.September 2007 FS/BFdeister electronic GmbHHermann-Bahlsen Str. 11 30890 BarsinghausenGermanyPhone: +49 (0) 51 05 - 51 61 11Fax: +49 (0) 51 05 - 51 62 17E-Mail: info@deister-gmbh.deWeb: www.deister.com 2deister electronic GmbH 30890 Barsinghausen Germany V04/09/07amanTag compact

Content1. General Information...................................................42. Technical Data.............................................................53. Operation....................................................................54. Wiring & Configuration ..............................................6 4.1 Optical display ..................................................................................................6 4.2 Pin assignment....................................................................................................7 4.3 DIP-switches.......................................................................................................95. Installation................................................................12 5.1 General Information..........................................................................................12 5.2 Mounting.........................................................................................................126. Regulatory notices.....................................................14V04/09/07 deister electronic GmbH 30890 Barsinghausen Germany 3amanTag compact

1. General Information●An amanTag compact-Reader generates an undirected field in an area up to 3 meters. In a vertical line to the reader the reading range is up to 8 meters.●An amanTag compact-Reader is able to recognize several transponders being in the reader-field at the same time.●The reading range can be varied gradually.●For exchange of data a Wiegand or RS 485 Interface can be used.4deister electronic GmbH 30890 Barsinghausen Germany V04/09/07amanTag compact

2. Technical DataMeets EN(I-ETS) 300220Dimensions (mm): 296 x 296 x 28Transmission frequency: 8,1 kHzReceiving frequency: 433 MHz ISM-bandModulation: PSKBaud-rate in reading: 1500 BaudSensibility: -100dBmReading distance: up to 8 m, depending on the type of transponderField strength in 8m distance: 99 dBμV/m average , 102 dBμV/m peak Interface: Wiegand, RS485Voltage supply: 24V (18V...30V)3. OperationTwo different frequency ranges are used to communicate with the transponder. The activating of a transponder and data exchange to the transponder takes place within a low frequent 8,1 kHz-field. Data exchange from the transponder to the reader takes place at 433 MHz.As soon as a transponder is brought into the working range of the low frequent field, it will be activated and recognized by the reader.The transponder stays in direct contact with the reader as long as it is located in the working range of the low frequent field.V04/09/07 deister electronic GmbH 30890 Barsinghausen Germany 5amanTag compact

4. Wiring & Configuration 4.1 Optical display An amanTag compact is equipped with three LEDs for optical display. The functions assigned are as follows:LED yellow: “Power ON”-display.Turned on const antly when connected to the power supply.LED green: Tag received.Blinks in case a transponder telegram has been received.LED red: Tag i n fie ld.Is active as long as a transponder is located in the field.6deister electronic GmbH 30890 Barsinghausen Germany V04/09/07amanTag compactyellow green redBoard of the reader

4.2 Pin assignmentA schematic description of the position of the pins and dip-switches is given in the diagram below: ST2 ST1 ST3 ST4 ST5DIP-SwitchesBank A Bank Byellow green red In the lower part of the card there are five connector rails for connecting to the power supply and to other devices in the peripheral equipment. The connector rails are assigned as follows.V04/09/07 deister electronic GmbH 30890 Barsinghausen Germany 7amanTag compactST1 ST2 ST3 ST4 ST5123456789101112 1224 123456 123 123

ST1 (PRX)P1 beeper–inputP2 groundP3 positive currant voltage 24V (18V – 30V)P4 Wiegand-output D1 ( loading arrangement RS 232 )P5 Wiegand-output D0P6 Wiegand-output CPP7 LED green inputP8 LED red inputP9 RS485 - AP10 RS485 - BP11 Tamper-contactP12 Tamper-contactST2 (SATELLITE)P1 positive currant voltage, 24V (18V ... 30V)P2 groundP3 RS485 - AP4 RS485 – BST3 (SYNC)P1 positive currant voltage, 24V (18V ... 30V) P2 groundP3 SYNC - AP4 SYNC – BP5 SYNC-AINP6 SYNC-BINST4 (RELAYS 1)P1 connected to P2, in case yellow LED is turned off (Breakdown of current voltage or alarm-condition)P2 reference connection of the relaysP3 connected to P2, in case the yellow LED is turned onST5 (RELAYS 2)P1 connected to P2, in case the red LED is turned offP2 reference connection of the relaysP3 connected to P2, in case the red LED is turned on (alarm-condition)8deister electronic GmbH 30890 Barsinghausen Germany V04/09/07amanTag compact

4.3 DIP-switchesThe amanTag compact can be configured with two eight pole dip-switches (rail A and B).A1 activate the monitor tag function.A2 always has to be „on“. A3 reserved for testing-modes, has to be turned off!A4 in case this switch is set, the RS485-address is defined by the door-numberA5-A8 Binary switch-group for definition of the door numberThe numbers 0000 and 1000 must not be used!B1-B4 binary switch-group to determine the wake-up-range B5 reserved for testing-modes, has to be turned off!B6 special function for ending the transport mode of the transponders. Should be turned off during normal working mode.B7 reserved for testing-modes, has to be turned off!B8 has to be set, to activate the RS485-receiver.V04/09/07 deister electronic GmbH 30890 Barsinghausen Germany 9amanTag compactON ON################ A1 A2 A3 A4 A5 A6 A7 A8 B1 B2 B3 B4 B5 B6 B7 B8

Examples for adjusting the door-number:Door-number 1:Door-number 2:Door-number 3:Door-number 8: (reserved, should not be used)10 deister electronic GmbH 30890 Barsinghausen Germany V04/09/07amanTag compactON###### # # A1 A2 A3 A4 A5 A6 A7 A8ON######## A1 A2 A3 A4 A5 A6 A7 A8ON###### # # A1 A2 A3 A4 A5 A6 A7 A8ON###### # # A1 A2 A3 A4 A5 A6 A7 A8

Examples for adjusting the wake-up-range:Range 1:Range 2:Range 3:Range 8:V04/09/07 deister electronic GmbH 30890 Barsinghausen Germany 11amanTag compactON######## B1 B2 B3 B4 B5 B6 B7 B8ON######## B1 B2 B3 B4 B5 B6 B7 B8ON######## B1 B2 B3 B4 B5 B6 B7 B8ON######## B1 B2 B3 B4 B5 B6 B7 B8

5. Installation 5.1 General Information●During the installation it is important to take care that the readers are not too close together. The low frequent fields of the readers must not overlap. ●The wake-up-fields of the different readers must not overlap. The range of the field can be varied by the dip-switches B1-B4.●Mounting on a metallic surface or on brick-walls with lots of steel reinforcement can reduce (or unexpectedly extend) the wake-up-range of the reader. 5.2 MountingThe amanTag compact reader will be mounted to the wall with 4 screws. The back panel of the device is provided with the according drill holes for the screws and the wire outlets.The dimensions can be seen in the following diagrams.12 deister electronic GmbH 30890 Barsinghausen Germany V04/09/07amanTag compact

V04/09/07 deister electronic GmbH 30890 Barsinghausen Germany 13amanTag compact

6. Regulatory noticesHereby, deister electronic GmbH declares that this equipment - if used according to the instructions - is in compliance with the essential requirements and other relevant provisions of the RTTE Directive 1999/5/ EC.A full declaration of conformity can be requested at:info@deister-gmbh.deApproved for use in all European countries.FCC Digital Device LimitationsRadio and Television InterferenceThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.CAUTION: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this equipment.Industry CanadaThis Class A digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.14 deister electronic GmbH 30890 Barsinghausen Germany V04/09/07amanTag compact

Notes:V04/09/07 deister electronic GmbH 30890 Barsinghausen Germany 15amanTag compact

Germany:deister electronic GmbHHermann-Bahlsen Str. 1130890 BarsinghausenTel.: +49 (0) 51 05 - 51 61 11Fax: +49 (0) 51 05 - 51 62 17info@deister-gmbh.dewww.deister.comdeister worldwideFrance:deister electronic france101 rue Pierre Semard92320 ChatillonTel.: +33 (0) 1 47 - 35 78 78Fax: +33 (0) 1 47 - 35 92 59info.fr@deister.comGreat Britain:deister electronic (UK) Ltd.Stapleton Way, Enterprise Park Spalding, LincolnshirePE11 3YQTel.: +44 (0) 1775 - 717100Fax: +44 (0) 1775 - 717101info.uk@deister.comJapan:deister electronic Japan, LTD.Toshiba Hoshikawa Bldg. 4F2-4 Kawabe-chôHodogaya-ku, Yokohama-shi Kanagawa, 240-0001Tel.: +81 (0) 45 340 1831Fax: +81 (0) 45 340 1801info.jp@deister.comAmericas and Caribbean:Deister Electronics USA, Inc.9303 Grant AvenueManassas, VA 20110Tel.: +1 703 - 368 2739Fax: +1 703 - 368 9791info.us@deister.com