Dell 24GBRL Notebook PC with Intel PRO/Wireless 2200BG WLAN User Manual Molokai Manual D5813bk0 part 1
Dell Inc. Notebook PC with Intel PRO/Wireless 2200BG WLAN Molokai Manual D5813bk0 part 1
Dell >
Contents
Manual 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 457333 |
| Application ID | +39iFg7Fbw9UKoQnaF3mWw== |
| Document Description | Manual 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 41.26kB (515733 bits) |
| Date Submitted | 2004-08-05 00:00:00 |
| Date Available | 2004-08-05 00:00:00 |
| Creation Date | 2004-07-26 09:41:23 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2004-07-26 09:43:12 |
| Document Title | Molokai_Manual_D5813bk0_part 1..PDF |
| Document Author: | 1 |
Dell™ Inspiron™ 700m Owner’s Manual Model PP07S w w w. d e l l . c o m | s u p p o r t . d e l l . c o m Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. Abbreviations and Acronyms For a complete list of abbreviations and acronyms, see the Dell Inspiron Help file. To access the help file, see page 10. If you purchased a Dell™ n Series computer, any references in this document to Microsoft® Windows® operating systems are not applicable. ____________________ Information in this document is subject to change without notice. © 2004 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, Inspiron, Dell Precision, Dell TravelLite, Dimension, OptiPlex, Latitude, TrueMobile, DellNet, PowerApp, PowerEdge, PowerConnect, PowerVault, and Axim are trademarks of Dell Inc.; Intel, Pentium, and Celeron are registered trademarks of Intel Corporation; Microsoft, Windows, and Outlook are registered trademarks of Microsoft Corporation; EMC is a registered trademark of EMC Corporation; Bluetooth is a trademark owned by Bluetooth SIG, Inc. and is used by Dell Inc. under license. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. Model PP07S June 2004 P/N D5813 Rev. A00 w w w. d e l l . c o m | s u p p o r t . d e l l . c o m Contents Finding Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Left Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Right Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Bottom View . Setting Up Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . 21 . . . . . . . . . . . . . . . . . . 21 . . . . . . . . . . . . . . . . 22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Connecting to the Internet Setting Up Your Internet Connection Transferring Information to a New Computer Setting Up a Printer Printer Cable . . . . . . Connecting a USB Printer Power Protection Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 24 . . . . . . . . . . . . . . . . . . . . . . . . . 24 Surge Protectors . . . . . . . Line Conditioners . . . . . . . Uninterruptible Power Supplies A Tour of Your Computer Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 25 25 . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 . . . . . . . . . . . . . . . . . . . . Using a Battery Battery Performance . Checking the Battery Charge . . . . . . . . . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 28 . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Microsoft Windows Power Meter Low-Battery Warning . . . . . . Charging the Battery . Removing a Battery Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Installing a Battery Storing a Battery . Installing Module Bay Devices About the Module Bay . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 . . . . . 31 . . . . . . 32 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Removing and Installing Devices While the Computer Is Turned Off Removing and Installing Devices While the Computer Is Running Using CDs, DVDs, and Other Multimedia Using CDs and DVDs . Copying CDs and DVDs . . . . . . . . . . . . . . . . . . . . . . . . . . . How to Copy a CD or DVD . . . . Using Blank CD-Rs and CD-RWs . Helpful Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 34 34 . . . . . . . . . . . . . 35 . . . . . . . . . . . . . . . . . 35 36 . . . . . . . . . . . . . . . . . . . Connecting Your Computer to a TV or Audio Device S-Video Connection . . . . . . . . . Enabling the Display Settings for a TV . . . . . . . . . . . . . . . . . Using the Keyboard and Touch Pad Numeric Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Key Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 System Functions . . . . . . . . . . . . . Display Functions . . . . . . . . . . . . . Radios (Including Wireless Networking) . . Power Management. . . . . . . . . . . . Speaker Functions . . . . . . . . . . . . Microsoft® Windows® Logo Key Functions Touch Pad . Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 40 40 40 40 41 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 . . . . . . . . . . . . . . . . . . . . . . 42 Customizing the Touch Pad 33 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Using PC Cards PC Card Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 PC Card Blanks Extended PC Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 . . . . . . . . . . . . . . . . . . . . . . . 43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Removing a PC Card or Blank Installing a PC Card Setting Up a Home and Office Network . . . . . . . . . . . . . . . . . . . . . 47 . . . . . . . . . . . . . . . . . . . . . . . . . . 48 . . . . . . . . . . . . . . . 48 Connecting to a Network Adapter Network Setup Wizard . Connecting to a Wireless Local Area Network Determining Your Network Type . . . . . . . . . . . . . . . . Connecting to a Wireless Network in Microsoft® Windows® XP . Configuring Security Settings (Optional) . . . . . . . . . . . . . . . . . . . . 48 49 52 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 . . . . . . . . . . . . . . . . . . . 57 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 . . . . Solving Problems Dell Diagnostics . When to Use the Dell Diagnostics Drivers What Is a Driver? . . . . . . . Identifying Drivers. . . . . . . Reinstalling Drivers and Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 60 61 . . . . . . . . . . . . 63 . . . . . . . . . . . . . . 63 . . . . . . . . . . . . . . . . . . . . Resolving Software and Hardware Incompatibilities Using Microsoft® Windows® XP System Restore Creating a Restore Point . . . . . . . . . . . . . . Restoring the Computer to an Earlier Operating State Undoing the Last System Restore . . . . . . . . . . . . . . . . . . . 63 64 64 . . . . . . . . . . . . . . . . . . 65 . . . . . . . . . . . . . . . . . . . . . . . 65 65 Reinstalling Microsoft® Windows® XP . Before You Begin . . . . Reinstalling Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contents Drive Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CD and DVD drive problems . . . . . . . . . . . . . . . . . . If you cannot eject the CD, CD-RW, DVD, or DVD+RW drive tray . If you hear an unfamiliar scraping or grinding sound . . . . . . Hard drive problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 IEEE 1394 Device Problems . Keyboard Problems 72 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Lockups and Software Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 73 . . . . . . . . . . . . . . . . . . . . . . 74 The computer does not start up . . . . . . . . . . . . . . . . The computer stops responding . . . . . . . . . . . . . . . . A program stops responding . . . . . . . . . . . . . . . . . . A program crashes repeatedly . . . . . . . . . . . . . . . . . A program is designed for an earlier Windows operating system. A solid blue screen appears . . . . . . . . . . . . . . . . . . Other software problems . . . . . . . . . . . . . . . . . . . Memory Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External Keyboard Problems . Unexpected Characters . . . . . . . . . . . 74 74 74 74 75 75 75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Network Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 PC Card Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Power Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Ensuring Sufficient Power for Your Computer . Printer Problems . . . . . . . . . . . . . . 78 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Scanner Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 . . . . . . . . . . . . . . . . . . . . . . . 80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 80 81 . . . . . . . . . . . . . . . . . . . . . . . 81 Sound and Speaker Problems No sound from integrated speakers No sound from external speakers . No sound from headphones . . . . Touch Pad or Mouse Problems 67 68 69 69 69 E-Mail, Modem, and Internet Problems Error Messages . . . . Contents . . . . . . . . . . . . . . . . . . Video and Display Problems . . . . . . . . . . . . . . . . . . . . . . . . If the display is blank . . . . . . . . If the display is difficult to read. . . . If only part of the display is readable . . . . . . . . . . . . . . . . . . 82 . . . . . . . . . . . . . . . . . 82 82 83 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 . . . . . . . . . . . . . . . . . 10 Adding and Replacing Parts Before You Begin Recommended Tools . . . . . . . . Turning Off Your Computer . . . . . . Before Working Inside Your Computer . . . . . . . . . . . . . . . . . 85 85 85 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 . . . . . . . . . . . . . . . . . . . . . 91 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Hard Drive . Returning a Hard Drive to Dell Memory . Modem . . . . . . . . . . . . . . . . . Mini PCI Card . . . . . . . . . . . . . . . . . 11 Appendix Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the System Setup Program . . . . . . . . . . . . . . . . . . . . . Overview . . . . . . . . . . . . . Viewing the System Setup Screens. System Setup Screens. . . . . . . Commonly Used Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dell Technical Support Policy (U.S. Only) . 106 106 107 107 107 . . . . . . . . . . . . . . . . 108 . . . . . . . . . . . . . . . . 109 109 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Definition of "Dell-Installed" Software and Peripherals Definition of "Third-Party" Software and Peripherals . Contacting Dell Index 101 Contents 8 Contents Finding Information What Are You Looking For? Find It Here • • • • How to access tutorials and other how to information How to get a copy of my invoice How to extend my warranty How to access Dell Support on my Microsoft® Windows® desktop (U.S. only) • Additional documentation, tools, troubleshooting information, and links to online support resources Dell Solution Center • A diagnostic program for my computer • Drivers for my computer Drivers and Utilities CD (also known as the ResourceCD) On your Windows desktop Drivers are already installed on your computer. You can use the CD to reinstall drivers (see page 61), run the Dell Diagnostics (see page 57), or access your documentation. Keep this CD in a safe place for future use. Readme files may be included on your CD to provide last-minute updates about technical changes to your computer or advanced technical-reference material for technicians or experienced users. NOTE: The latest drivers and documentation updates can be found at support.dell.com. • • • • • • How to set up a printer Additional information about setting up my computer How to troubleshoot and solve problems How to remove and install parts Technical specifications How to contact Dell Inspiron Owner’s Manual NOTE: This document is available as a PDF at support.dell.com. Finding Information www.dell.com | support.dell.com What Are You Looking For? Find It Here • • • • • Dell™ Product Information Guide Warranty information Safety instructions Regulatory information Ergonomics information End User License Agreement • How to set up my computer • • • • • Tips on using Microsoft® Windows® How to play CDs and DVDs How to use standby mode and hibernate mode How to change my display resolution How to clean my computer 10 Finding Information Setup Diagram Dell Inspiron Help file 1 Click the Start button and click Help and Support. 2 Click User and system guides and click User’s guides. 3 Click Dell Inspiron Help. What Are You Looking For? Find It Here • Service Tag and Express Service Code • Microsoft Windows License Label Service Tag and Microsoft Windows License These labels are located on the bottom of your computer. •Use the Service Tag to identify your computer when you use support.dell.com or contact technical support. • Enter the Express Service Code to direct your call when contacting technical support. The Express Service Code is not available in all countries. • Latest drivers for my computer • Answers to technical service and support questions • Online discussions with other users and technical support • Documentation for my computer Dell Support Website — support.dell.com NOTE: Select your region to view the appropriate support site. • How to use Windows XP • Documentation for my computer • Documentation for devices (such as a modem) Windows Help and Support Center 1 Click the Start button and click Help and Support. 2 Type a word or phrase that describes your problem and click the arrow icon. 3 Click the topic that describes your problem. 4 Follow the instructions on the screen. The Dell Support website provides several online tools, including: • Solutions — Troubleshooting hints and tips, articles from technicians, and online courses • Community — Online discussion with other Dell customers • Upgrades — Upgrade information for components, such as memory, the hard drive, and the operating system • Customer Care — Contact information, order status, warranty, and repair information • Downloads — Drivers, patches, and software updates • Reference — Computer documentation, product specifications, and white papers Finding Information 11 www.dell.com | support.dell.com What Are You Looking For? Find It Here • How to reinstall my operating system Operating System CD The operating system is already installed on your computer. To reinstall your operating system, use the Operating System CD. See "Reinstalling Windows XP" on page 65. Keep this CD in a safe place for future use. After you reinstall your operating system, use the Drivers and Utilities CD to reinstall drivers for the devices that came with your computer. Your operating system product key label is located on your computer. NOTE: The color of your CD varies based on the operating system you ordered. 12 Finding Information A Tour of Your Computer Front View DISPLAY LATCH RELEASE — Slide this display latch to release and open the display. DISPLAY — For more information about your display, see "Using the Display" in the Dell Inspiron Help file. To access help, see page 10. S P E A K E R S — To adjust the volume of the integrated speakers press the volume control keyboard shortcuts. For more information, see "Using the Keyboard and Touch Pad" on page 39. POWER BUTTON — Press the power button to turn on the computer or to enter or exit a power management mode. NOTICE: To avoid losing data, shut down your computer instead of pressing the power button. A Tour of Your Computer 13 www.dell.com | support.dell.com AUDIO CONNECTORS. — Connect headphones and microphone. Attach headphones or speakers to the Attach a microphone to the connector. connector. IEEE 1394 C O N N E C T O R — Connects devices supporting IEEE 1394 high-speed transfer rates, such as some digital video cameras. TO U C H P A D — Touch pad and touch pad buttons provide the functionality of a mouse. See "Using the Keyboard and Touch Pad" on page 39 for more information. — The keyboard includes a numeric keypad as well as the Microsoft® Windows® logo key. For information on supported keyboard shortcuts, see "Using the Keyboard and Touch Pad" on page 39. KEYBOARD 14 A Tour of Your Computer DEVICE AND KEYBOARD STATUS LIGHTS Turns on when wireless networking is enabled. To enable or disable wireless networking, press. Turns on when you turn on the computer. Turns on steadily or blinks when the computer is in a power management mode. Indicates battery charge status. If the computer is connected to an electrical outlet, the as follows: – Solid green: The battery is charging. light operates If the computer is running on a battery, the light operates as follows: – Off: The battery is adequately charged (or the computer is turned off). – Flashing green: The battery charge is low. Turns on when the computer reads or writes data. NOTICE: To avoid loss of data, never turn off the computer while the light is flashing. Turns on when the numeric keypad is enabled. Turns on when the uppercase letter function is enabled. Turns on when the scroll lock function is enabled. NOTE: Device status lights are also visible when the display is closed. A Tour of Your Computer 15 www.dell.com | support.dell.com Left Side View SECURITY CABLE SLOT — Lets you attach a commercially available antitheft device to the computer. For more information, see the instructions included with the device. Before you buy an antitheft device, ensure that it will work with the security cable slot. EXHAUST VENT — The computer uses an internal fan to create airflow through the vents, which prevents the computer from overheating. NOTE: The computer turns on the fan when the computer gets hot. Fan noise is normal and does not indicate a problem with the fans or the computer. CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your computer in a low-airflow environment, such as a closed briefcase, while it is running. Restricting the airflow can damage the computer or cause a fire. 16 A Tour of Your Computer VIDEO CONNECTOR Connects an external monitor. For more information, see "Using the Display" in the Dell Inspiron Help file. To access help, see page 10. USB 2.0 CONNECTOR Connects USB 2.0 compliant devices, such as a mouse, keyboard, or printer. P C C A R D S L O T — Supports one PC Card, such as a modem or network adapter. The computer ships with a plastic blank installed in the slot. For more information, see "Using PC Cards" on page 43. SECURE DIGITAL MEMORY CARD SLOT The Secure Digital memory card slot supports one Secure Digital memory card. Use Secure Digital memory cards to save or back up data. A Tour of Your Computer 17 www.dell.com | support.dell.com Right Side View MODULE BAY — You can install devices such as an optical drive or Dell TravelLite™ module in the module bay. For more information, see "Installing Module Bay Devices" on page 31. MODEM CONNECTOR (RJ-11) Connects the telephone line to the modem connector. For information on using the modem, see the online modem documentation supplied with your computer. NETWORK CONNECTOR (RJ-45) NOTICE: The network connector is slightly larger than the modem connector. To avoid damaging the computer, do not plug a telephone line in to the network connector. Connects the computer to a network. The green and yellow lights next to the connector indicate activity for both wired and wireless network communications. For information on using the network adapter, see the online network-adapter documentation supplied with your computer. A C A D A P T E R C O N N E C T O R — Connects the AC adapter so that you can run the computer on AC power instead of battery power. 18 A Tour of Your Computer The AC adapter converts AC power to the DC power required by the computer. You can connect the AC adapter with your computer turned either on or off. CAUTION: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to the power strip or electrical outlet may cause fire or equipment damage. NOTICE: When you disconnect the AC adapter cable from the computer, grasp the connector, not the cable itself, and pull firmly but gently to avoid damaging the cable. NOTICE: Ensure that the AC adapter cable is not in the path of chairs or other objects that could crush it. S-VIDEO TV-OUT CONNECTOR Connects your computer to a TV. For more information, see "Connecting Your Computer to a TV or Audio Device" on page 35. A Tour of Your Computer 19 www.dell.com | support.dell.com Bottom View M O D U L E B A Y — You can install devices such as an optical drive in the module bay. For more information, see "Installing Module Bay Devices" on page 31. MODULE BAY LATCH RELEASE — Releases a device. See "Installing Module Bay Devices" on page 31 for instructions. HARD DRIVE — Stores software and data. BATTERY LATCH RELEASE — Releases a device. See "Using a Battery" on page 27 for instructions. BATTERY/BATTERY BAY — When a battery is installed, you can use the computer without connecting the computer to an electrical outlet. See "Using a Battery" on page 27. A I R V E N T — The computer uses an internal fan to create airflow through the vents, which prevents the computer from overheating. CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your computer in a low-airflow environment, such as a closed briefcase, while it is running. Restricting the airflow can damage the computer or cause a fire. MEMORY MODULE COVER — Covers the compartment that contains the memory module. See "Memory" on page 87. M I N I P C I C A R D A N D M O D E M C O V E R — Covers the compartment that contains the Mini PCI card and modem. See "Mini PCI Card" on page 91 and "Modem" on page 89. 20 A Tour of Your Computer Setting Up Your Computer Connecting to the Internet NOTE: ISPs and ISP offerings vary by country. To connect to the Internet, you need a modem or network connection and an Internet service provider (ISP), such as AOL or MSN. Your ISP will offer one or more of the following Internet connection options: • Dial-up connections that provide Internet access through a telephone line. Dial-up connections are considerably slower than DSL and cable modem connections. • DSL connections that provide high-speed Internet access through your existing telephone line. With a DSL connection, you can access the Internet and use your telephone on the same line simultaneously. • Cable modem connections that provide high-speed Internet access through your local cable TV line. If you are using a dial-up connection, connect a telephone line to the modem connector on your computer and to the telephone wall jack before you set up your Internet connection. If you are using a DSL or cable modem connection, contact your ISP for setup instructions. Setting Up Your Internet Connection To set up an AOL or MSN connection: Save and close any open files, and exit any open programs. Double-click the MSN Explorer or AOL icon on the Microsoft® Windows® desktop. Follow the instructions on the screen to complete the setup. If you do not have an MSN Explorer or AOL icon on your desktop or if you want to set up an Internet connection with a different ISP: Save and close any open files, and exit any open programs. Click the Start button and click Internet Explorer. The New Connection Wizard appears. Click Connect to the Internet. Setting Up Your Computer 21 www.dell.com | support.dell.com In the next window, click the appropriate option: • If you do not have an ISP and want to select one, click Choose from a list of Internet service providers (ISPs). • If you have already obtained setup information from your ISP but you did not receive a setup CD, click Set up my connection manually. • If you have a CD, click Use the CD I got from an ISP. Click Next. If you selected Set up my connection manually, continue to step 6. Otherwise, follow the instructions on the screen to complete the setup. NOTE: If you do not know which type of connection to select, contact your ISP. Click the appropriate option under How do you want to connect to the Internet?, and then click Next. Use the setup information provided by your ISP to complete the setup. If you are having problems connecting to the Internet, see "E-Mail, Modem, and Internet Problems" on page 70. If you cannot connect to the Internet but have successfully connected in the past, the ISP might have a service outage. Contact your ISP to check the service status, or try connecting again later. Transferring Information to a New Computer The Microsoft® Windows® XP operating system provides a Files and Settings Transfer wizard to move data from the source computer to the new computer. You can move data such as: • E-mails • Toolbar settings • Window sizes • Internet bookmarks You can transfer the data to the new computer over a network or serial connection, or you can store it on a removable medium, such as a writable CD or floppy disk. To prepare the new computer for the file transfer: 22 Click the Start button, point to All Programs→ Accessories→ System Tools, and then click Files and Settings Transfer Wizard. When the Files and Settings Transfer Wizard welcome screen appears, click Next. On the Which computer is this? screen, click New Computer and click Next. On the Do you have a Windows XP CD? screen, click I will use the wizard from the Windows XP CD and click Next. Setting Up Your Computer 5 When the Now go to your old computer screen appears, go to your old or source computer. Do not click Next at this time. To copy data from the old computer: On the old computer, insert the Windows XP Operating System CD. On the Welcome to Microsoft Windows XP screen, click Perform additional tasks. Under What do you want to do?, click Transfer files and settings. On the Files and Settings Transfer Wizard welcome screen, click Next. On the Which computer is this? screen, click Old Computer and click Next. On the Select a transfer method screen, click the transfer method you prefer. On the What do you want to transfer? screen, select the items you want to transfer and click Next. After the information has been copied, the Completing the Collection Phase screen appears. Click Finish. To transfer data to the new computer: On the Now go to your old computer screen on the new computer, click Next. On the Where are the files and settings? screen, select the method you chose for transferring your settings and files and click Next. The wizard reads the collected files and settings and applies them to your new computer. When all of the settings and files have been applied, the Finished screen appears. Click Finished and restart the new computer. Setting Up a Printer NOTICE: Complete the operating system setup before you connect a printer to the computer. See the documentation that came with the printer for setup information, including how to: • Obtain and install updated drivers. • Connect the printer to the computer. • Load paper and install the toner or ink cartridge. • Contact the printer manufacturer for technical assistance. Printer Cable Your printer may not come with a printer cable, so if you purchase a cable separately, ensure that it is compatible with your printer. If you purchased a printer cable at the same time you purchased your computer, the cable may arrive in the computer box. Setting Up Your Computer 23 www.dell.com | support.dell.com Connecting a USB Printer NOTE: You can connect USB devices while the computer is turned on. Complete the operating system setup if you have not already done so. Install the printer driver if necessary. See the documentation that came with your printer. Attach the USB printer cable to the USB connectors on the computer and the printer. The USB connectors fit only one way. Power Protection Devices Several devices are available to protect against power fluctuations and failures: • Surge protectors • Line conditioners • Uninterruptible power supplies (UPS) Surge Protectors Surge protectors and power strips equipped with surge protection help to prevent damage to your computer from voltage spikes that can occur during electrical storms or following power interruptions. The level of protection is usually commensurate with the cost of the surge protector. Some surge protector manufacturers include warranty coverage for certain types of damage. 24 Setting Up Your Computer Carefully read the device warranty when choosing a surge protector. A device with a higher joule rating offers more protection. Compare joule ratings to determine the relative effectiveness of different devices. NOTICE: Most surge protectors do not protect against power fluctuations or power interruptions caused by nearby lightning strikes. When lightning occurs in your area, disconnect the telephone line from the telephone wall jack and disconnect your computer from the electrical outlet. Many surge protectors have a telephone jack for modem protection. See the surge protector documentation for modem connection instructions. NOTICE: Not all surge protectors offer network adapter protection. Disconnect the network cable from the network wall jack during electrical storms. Line Conditioners NOTICE: Line conditioners do not protect against power interruptions. Line conditioners are designed to maintain AC voltage at a fairly constant level. Uninterruptible Power Supplies NOTICE: Loss of power while data is being saved to the hard drive may result in data loss or file damage. NOTE: To ensure maximum battery operating time, connect only your computer to a UPS. Connect other devices, such as a printer, to a separate power strip that provides surge protection. A UPS protects against power fluctuations and interruptions. UPS devices contain a battery that provides temporary power to connected devices when AC power is interrupted. The battery charges while AC power is available. See the UPS manufacturer documentation for information on battery operating time and to ensure that the device is approved by Underwriters Laboratories (UL). Setting Up Your Computer 25 26 Setting Up Your Computer www.dell.com | support.dell.com Using a Battery Battery Performance CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. NOTE: Batteries for portable computers are covered only during the initial 1-year period of the limited warranty for your computer. For more information about the Dell warranty for your computer, see the Product Information Guide or separate paper warranty document that shipped with your computer. For optimal computer performance and to help preserve BIOS settings, operate your Dell™ portable computer with the main battery installed at all times. Use a battery to run the computer when it is not connected to an electrical outlet. One battery is supplied as standard equipment in the battery bay. Battery operating time varies depending on operating conditions. Operating time is significantly reduced when you perform operations including, but not limited to, the following: • Using DVD, DVD-R, and CD-RW drives • Using wireless communications devices, PC Cards, or USB devices • Using high-brightness display settings, 3D screen savers, or other power-intensive programs such as 3D games • Running the computer in maximum performance mode (see "Power Management" in the Dell Inspiron Help file.) NOTE: It is recommended that you connect your computer to an electrical outlet when writing to a CD or DVD. You can set power management options to alert you when the battery charge is low. CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only with a compatible battery purchased from Dell. The lithium-ion battery is designed to work with your Dell computer. Do not use a battery from other computers with your computer. CAUTION: Do not dispose of batteries with household waste. When your battery no longer holds a charge, call your local waste disposal or environmental agency for advice on disposing of a lithium-ion battery. See "Battery Disposal" in the Product Information Guide. CAUTION: Misuse of the battery may increase the risk of fire or chemical burn. Do not puncture, incinerate, disassemble, or expose the battery to temperatures above 65°C (149°F). Keep the battery away from children. Handle damaged or leaking batteries with extreme care. Damaged batteries may leak and cause personal injury or equipment damage. Using a Battery 27 www.dell.com | support.dell.com Checking the Battery Charge The Microsoft® Windows® Power Meter window and provide information on the battery charge. icon and the low-battery warning Microsoft Windows Power Meter The Windows Power Meter indicates the remaining battery charge. To check the Power Meter, double-click the icon on the taskbar. For more information about the Power Meter tab, see "Power Management" in the Dell Inspiron Help file. To access help, see page 10. If the computer is connected to an electrical outlet, a icon appears. Low-Battery Warning NOTICE: To avoid losing or corrupting data, save your work immediately after a low-battery warning. Then connect the computer to an electrical outlet. If the battery runs completely out of power, hibernate mode begins automatically. A pop-up window warns you when the battery charge is approximately 90 percent depleted. For more information about low-battery alarms, see "Power Management" in the Dell Inspiron Help file. To access help, see page 10. Charging the Battery When you connect the computer to an electrical outlet or install a battery while the computer is connected to an electrical outlet, the computer checks the battery charge and temperature. If necessary, the AC adapter then charges the battery and maintains the battery charge. If the battery is hot from being used in your computer or being in a hot environment, the battery may not charge when you connect the computer to an electrical outlet. For more information about resolving problems with a battery, see "Power Problems" on page 77. 28 Using a Battery Removing a Battery CAUTION: Before performing these procedures, disconnect the modem from the telephone wall jack. Ensure that the computer is turned off, set to the hibernate power management mode, or connected to an electrical outlet. Slide and hold the battery-bay latch release on the bottom of the computer, and then remove the battery from the bay. shown with optional 8-cell battery Installing a Battery Slide the battery into the bay until the latch release clicks. Storing a Battery Remove the battery when you store your computer for an extended period of time. A battery discharges during prolonged storage. After a long storage period, recharge the battery fully before you use it. Using a Battery 29 30 Using a Battery www.dell.com | support.dell.com Installing Module Bay Devices About the Module Bay CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. You can install devices such as a DVD drive, CD-RW/DVD drive, or DVD+RW in the module bay. Removing and Installing Devices While the Computer Is Turned Off NOTICE: To prevent damage to devices, store them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or placing heavy objects on top of them. Slide and hold the device latch release. Pull the device out of the module bay. Push the new device into the bay until it clicks. Installing Module Bay Devices 31 www.dell.com | support.dell.com Removing and Installing Devices While the Computer Is Running Before ejecting the device, double-click the Safely Remove Hardware icon on the taskbar, click the device you want to eject, and click Stop. NOTICE: To prevent damage to devices, store them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or placing heavy objects on top of them. Slide and hold the device latch release. Pull the device out of the module bay. Push the new device into the bay until it clicks. The operating system automatically recognizes the device. 32 Installing Module Bay Devices Using CDs, DVDs, and Other Multimedia Using CDs and DVDs For information about using CDs and DVDs in your computer, see the Dell™ Inspiron™ Help file. To access the help file, see page 10. Copying CDs and DVDs NOTE: Ensure that you follow all copyright laws when you create CDs or DVDs. This section applies only to computers that have a CD-R, CD-RW, DVD+RW, DVD+R, or DVD/CD-RW combo drive. The following instructions show how to make an exact copy of a CD or DVD. You can also use Sonic RecordNow for other purposes, including creating CDs from audio files on your computer and creating MP3 CDs. For instructions, see the Sonic RecordNow documentation that came with your computer. Open Sonic RecordNow, click the question mark icon in the upper-right corner of the window, and then click RecordNow Help or RecordNow Tutorial. How to Copy a CD or DVD NOTE: If you have a DVD/CD-RW combo drive and you experience recording problems, check for available software patches at the Sonic support website at support.sonic.com. Currently, five DVD-writable disc formats are available: DVD+R, DVD+RW, DVD-R, DVD-RW, and DVD-RAM. The DVD-writable drives installed in Dell™ computers can write to DVD+R and DVD+RW media, and can read DVD-R and DVD-RW media. However, DVD-writable drives do not write to and might not read DVD-RAM media. In addition, commercially available DVD players for home theater systems might not read all five formats. NOTE: Most commercial DVDs have copyright protection and cannot be copied using Sonic RecordNow. Click the Start button, point to All Programs→ Sonic→ RecordNow!, and then click RecordNow! Click either the audio tab or the data tab, depending on the kind of CD or DVD you want to copy. Click Exact Copy. Using CDs, DVDs, and Other Multimedia 33 www.dell.com | support.dell.com To copy the CD or DVD: • If you have one CD or DVD drive, ensure that the settings are correct and click Copy. The computer reads your source CD or DVD and copies it to a temporary folder on your computer hard drive. When prompted, insert a blank CD or DVD into the CD or DVD drive and click OK. • If you have two CD or DVD drives, select the drive into which you have inserted your source CD or DVD and click Copy. The computer copies the data on the CD or DVD to the blank CD or DVD. Once you have finished copying the source CD or DVD, the CD or DVD that you have created automatically ejects. Using Blank CD-Rs and CD-RWs Your CD-RW drive can write to two different types of recording media—CD-Rs and CD-RWs (including high-speed CD-RWs). Use blank CD-Rs to record music or permanently store data files. After creating a CD-R, you cannot write to that CD-R again without changing your method of recording (see the Sonic documentation for more information). Use blank CD-RWs to write to CDs or to erase, rewrite, or update data on CDs. Your DVD-writable drive can write to four different types of recording media—CD-Rs, CD-RWs (including high-speed CD-RWs), DVD+Rs, and DVD+RWs. Blank DVD+Rs can be used to permanently store large amounts of information. After you create a DVD+R disc, you may not be able to write to that disc again if the disc is "finalized" or "closed" during the final stage of the disc creation process. Use blank DVD+RWs if you plan to erase, rewrite, or update information on that disc later. Helpful Tips 34 • Use Microsoft® Windows® Explorer to drag and drop files to a CD-R or CD-RW only after you start Sonic RecordNow and open a RecordNow project. • You must use CD-Rs to burn music CDs that you want to play in regular stereos. CD-RWs do not play in most home or car stereos. • You cannot create audio DVDs with Sonic RecordNow. • Music MP3 files can be played only on MP3 players or on computers that have MP3 software installed. • Do not burn a blank CD-R or CD-RW to its maximum capacity; for example, do not copy a 650-MB file to a 650-MB blank CD. The CD-RW drive needs 1 or 2 MB of the blank CD to finalize the recording. Using CDs, DVDs, and Other Multimedia • Use a blank CD-RW to practice CD recording until you are familiar with CD recording techniques. If you make a mistake, you can erase the data on the CD-RW and try again. You can also use blank CD-RWs to test music file projects before you record the project permanently to a blank CD-R. • See the Sonic support website at support.sonic.com for additional information. Connecting Your Computer to a TV or Audio Device NOTE: Video and audio cables for connecting your computer to a TV or other audio device are not included with your computer. Cables may be purchased at most consumer electronics stores. You can use a commercially available S-video cable to connect your computer to the S-video input on your TV. The audio connector on the front of the computer enables you to connect the computer to your TV or audio device, using a commercially available audio cable. NOTE: See the diagrams at the beginning of each subsection to help you determine which method of connection you should use. When you finish connecting the video and audio cables between your computer and your TV, you must enable your computer to work with the TV. See "Enabling the Display Settings for a TV" on page 36 to ensure that the computer recognizes and works properly with the TV. S-Video Connection Turn off the computer and the TV and/or audio device that you want to connect. Plug one end of the S-video cable in to the S-video TV-out connector on the computer. Using CDs, DVDs, and Other Multimedia 35 www.dell.com | support.dell.com Plug the other end of the S-video cable in to the S-video input connector on your TV. Plug the single-connector end of the audio cable in to the headphone connector on your computer. Plug the two RCA connectors on the other end of the audio cable in to the audio input connectors on your TV or other audio device. Turn on the TV, turn on any audio device that you connected (if applicable), and then turn on the computer. See "Enabling the Display Settings for a TV" on page 36 to ensure that the computer recognizes and works properly with the TV. Enabling the Display Settings for a TV Integrated Video Controller NOTE: Ensure that you properly connect the TV before you enable the display settings. Click the Start button and click Control Panel. Click Appearances and Themes. Under or pick a Control Panel icon, click Display. Click the Settings tab and click Advanced. Click the Intel (R) Extreme Graphics tab. Click Graphic Properties. If you want to use only a TV without using the computer display or any other display options: 36 In the new window, click TV so that a red check mark appears directly on top of the TV icon. Ensure that the settings are correct. If you want to use a TV and the computer display at the same time: In the new window, click Intel (R) Dual Display Clone and ensure that one of the devices listed is a TV. Click Device Settings. In the new window, ensure that the display resolution settings are correct. Using CDs, DVDs, and Other Multimedia 9 Click Apply to view the new settings. 10 Click OK to confirm the settings change. 11 Click Yes to keep the new settings. 12 Click OK. Using CDs, DVDs, and Other Multimedia 37 www.dell.com | support.dell.com 38 Using CDs, DVDs, and Other Multimedia Using the Keyboard and Touch Pad Numeric Keypad The numeric keypad functions like the numeric keypad on an external keyboard. Each key on the keypad has multiple functions. The keypad numbers and symbols are marked in blue on the right of the keypad keys. To type a number or symbol, hold down and press the desired key. • To enable the keypad, press . The • To disable the keypad, press again. light indicates that the keypad is active. Using the Keyboard and Touch Pad 39 www.dell.com | support.dell.com Key Combinations System Functions Opens the Task Manager window. Enables and disables the numeric keypad. Enables and disables the scroll lock. Display Functions Switches the video image to the next display option. The options include the integrated display, an external monitor, and both displays simultaneously. and up-arrow key Increases brightness on the integrated display only (not on an external monitor). and down-arrow key Decreases brightness on the integrated display only (not on an external monitor). Radios (Including Wireless Networking) Enables and disables radios including wireless networking. Power Management Activates a power management mode. You can reprogram this keyboard shortcut to activate a different power management mode using the Advanced tab in the Power Options Properties window. See "Power Management" in the Dell Inspiron Help file. To access help, see page 10. Speaker Functions 40 Enables and disables the integrated speakers and external speakers (mute function), if attached. Decreases the volume of the integrated speakers and external speakers, if attached. Increases the volume of the integrated speakers and external speakers, if attached. Using the Keyboard and Touch Pad Microsoft® Windows® Logo Key Functions Windows logo key and Minimizes all open windows. Windows logo key and Maximizes all windows. Windows logo key and Runs Windows Explorer. Windows logo key and Opens the Run dialog box. Windows logo key and Opens the Search Results dialog box. Windows logo key and Opens the Search Results-Computer dialog box (if the computer is connected to a network). Windows logo key and Opens the System Properties dialog box. To adjust keyboard operation, such as the character repeat rate, open the Control Panel, click Printers and Other Hardware, and click Keyboard. Touch Pad The touch pad detects the pressure and movement of your finger to allow you to move the cursor on the display. Use the touch pad and touch pad buttons as you would use a mouse. • To move the cursor, lightly slide your finger over the touch pad. • To select an object, lightly tap once on the surface of the touch pad or use your thumb to press the left touch-pad button. Using the Keyboard and Touch Pad 41 www.dell.com | support.dell.com • To select and move (or drag) an object, position the cursor on the object and tap down-updown on the touch pad. On the second down motion, leave your finger on the touch pad and move the selected object by sliding your finger over the surface. • To double-click an object, position the cursor on the object and tap twice on the touch pad or use your thumb to press the left touch-pad button twice. Customizing the Touch Pad You can use the Mouse Properties window to disable the touch pad or adjust its settings. Open the Control Panel, click Printers and Other Hardware, and then click Mouse. In the Mouse Properties window: 42 • Click the Device Select tab to disable the touch pad. • Click the Pointer tab to adjust touch pad settings. Click OK to save the settings and close the window. Using the Keyboard and Touch Pad Using PC Cards PC Card Types See "Specifications" on page 101 for information on supported PC Cards. NOTE: A PC Card is not a bootable device. The PC Card slot has one connector that supports a single Type I or Type II card. The PC Card slot supports CardBus technology and extended PC Cards. "Type" of card refers to its thickness, not its functionality. PC Card Blanks Your computer shipped with a plastic blank installed in the PC Card slot. Blanks protect unused slots from dust and other particles. Save the blank for use when no PC Card is installed in the slot; blanks from other computers may not fit your computer. To remove the blank, see "Removing a PC Card or Blank" on page 43. Extended PC Cards An extended PC Card (for example, a wireless network adapter) is longer than a standard PC Card and extends outside the computer. Follow these precautions when using extended PC Cards: • Protect the exposed end of an installed card. Striking the end of the card can damage the system board. • Always remove an extended PC Card before you pack the computer in its carrying case. Removing a PC Card or Blank NOTICE: Use the PC Card configuration utility (click the icon in the taskbar) to select a card and stop it from functioning before you remove it from the computer. If you do not stop the card in the configuration utility, you could lose data. Do not attempt to eject a card by pulling its cable, if one is attached. Using PC Cards 43 www.dell.com | support.dell.com CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. Press in on the latch. For some latches, you must press the latch twice: once to pop the latch out, and then a second time to pop the card out. 44 Remove the card or blank. Save a blank to use when no PC Card is installed in a slot. Blanks protect unused slots from dust and other particles. Using PC Cards Installing a PC Card You can install a PC Card in the computer while the computer is running. The computer automatically detects the card. PC Cards are generally marked with a symbol (such as a triangle or an arrow) to indicate which end to insert into the slot. The cards are keyed to prevent incorrect insertion. If card orientation is not clear, see the documentation that came with the card. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. To install a PC Card: Hold the card with its orientation symbol pointing into the slot and the top side of the card facing up. The latch may need to be in the "in" position before you insert the card. Slide the card into the slot until the card is completely seated in its connector. If you encounter too much resistance, do not force the card. Check the card orientation and try again. The computer recognizes most PC Cards and automatically loads the appropriate device driver. If the configuration program tells you to load the manufacturer's drivers, use the floppy disk or CD that came with the PC Card. Using PC Cards 45 46 Using PC Cards www.dell.com | support.dell.com Setting Up a Home and Office Network Connecting to a Network Adapter Before you connect your computer to a network, the computer must have a network adapter installed and a network cable connected to it. To connect a network cable: Connect the network cable to the network adapter connector on the back of your computer. NOTE: Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure. Connect the other end of the network cable to a network connection device, such as a network wall jack. NOTE: Do not use a network cable with a telephone wall jack. Setting Up a Home and Office Network 47 www.dell.com | support.dell.com Network Setup Wizard The Microsoft® Windows® XP operating system provides a Network Setup Wizard to guide you through the process of sharing files, printers, or an Internet connection between computers in a home or small office. Click the Start button, point to All Programs→ Accessories→ Communications, and then click Network Setup Wizard. On the welcome screen, click Next. Click Checklist for creating a network. NOTE: Selecting the connection method labeled "This computer connects directly to the Internet" enables the integrated firewall provided with Windows XP. Complete the checklist and required preparations. Return to the Network Setup Wizard and follow the instructions on the screen. Connecting to a Wireless Local Area Network NOTE: These networking instructions do not apply to cards with Bluetooth® wireless technology or cellular products. Determining Your Network Type NOTE: Most wireless networks are of the infrastructure type. Wireless networks fall into three categories—infrastructure networks, ad-hoc networks, and home networks. An infrastructure network uses routers or access points to connect several computers. An ad-hoc network does not use routers or access points and consists of computers that broadcast to one another. A home network typically employs high-speed Internet access such as DSL or cable, and an access point or router. For more information on the type of network you have, go to support.dell.com and search for Knowledge Base articles on wireless networking. 48 Setting Up a Home and Office Network Connecting to a Wireless Network in Microsoft® Windows® XP Your wireless network card requires specific software and drivers in order to connect to a network. The software is already installed. If the software is removed or corrupted, follow the instructions included in the user's guide for your wireless network card. The user’s guide is located on your Drivers and Utilities CD (that came with your computer) in the "User’s Guides-Network User’s Guides" category. The user’s guide is also available on the Dell Support website at support.dell.com. Click the Start button, click Control Panel, and then click Switch to Classic View. Double-click Network Connections. Click Wireless Network Connection. The Wireless Network Connection icon is highlighted. Under Network Tasks in the left-hand pane, click Change settings of this connection. The Wireless Network Connection Properties window appears. Setting Up a Home and Office Network 49 www.dell.com | support.dell.com Click the Wireless Networks tab. NOTE: The names of wireless networks that your computer can detect are listed under Available Networks. 50 Setting Up a Home and Office Network 6 Click Add. The Wireless network properties window appears. NOTE: If you are using a WPA-protected network, and the Association tab does not give you the option to select WPA, download the WPA wireless security update from the Microsoft support site. Enter the name of your network in the Network name (SSID) field. If you do not need to configure security settings, go to step 9. If you choose to configure security settings (optional), go to "Configuring Security Settings (Optional)" on page 52. Click OK. Your new network name appears in the Preferred networks field, and your network setup is complete. Setting Up a Home and Office Network 51 www.dell.com | support.dell.com Configuring Security Settings (Optional) Choose one of the following connection options based on the security settings for your network: • Connecting to a Network with Wired Equivalent Protocol (WEP) Security Requirements • Connecting to a Network with Wi-Fi Protected Access (WPA) Security Requirements NOTE: Network security settings are unique to your network. Dell cannot provide this information. Connecting to a Network With Wired Equivalent Protocol (WEP) Security Requirements In the Preferred networks field, click the name of your wireless network. Click Properties. From the Network Authentication drop-down menu, select Open. Earlier versions of Dell wireless network software may not contain the drop-down menu. If you are using an earlier version, click to check the Data encryption (WEP enabled) check box and go to step 5. 52 Setting Up a Home and Office Network 4 From the Data encryption drop-down menu, select WEP. If the wireless network does not require a network key, such as a password, go to step 9. Click to uncheck the The key is provided for me automatically check box. Enter the WEP network key in the Network key field. Enter the WEP network key again in the Confirm network key field. NOTE: Your computer can take up to 1 minute to connect to the network. Click OK. Your network setup is complete. Connecting to a Network With Wi-Fi Protected Access (WPA) Security Requirements The following instructions are basic steps for connecting to a WPA network. If your network requires a user name, password, or domain settings, consult the setup instructions in the user’s guide for your wireless network card. Setting Up a Home and Office Network 53 www.dell.com | support.dell.com NOTE: WPA protocols require that you know the network authentication and data encryption settings for your wireless network. In addition, your WPA-protected network may require special settings such as a network key, user name, password, and domain name. In the Preferred networks field, click the name of your wireless network. Click Properties. From the Network Authentication drop-down menu, select your network authentication type. If you are using a WPA-protected network, and the Association tab does not give you the option to select WPA, download the WPA wireless security update from the Microsoft support site. 54 Setting Up a Home and Office Network 4 From the Data encryption drop-down menu, select your data encryption type. If your wireless network requires a key, enter it in the Network key field. NOTE: Your computer can take up to 1 minute to connect to the network. Click OK. Your network setup is complete. Setting Up a Home and Office Network 55 www.dell.com | support.dell.com 56 Setting Up a Home and Office Network Solving Problems Dell Diagnostics CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. When to Use the Dell Diagnostics If you experience a problem with your computer, perform the checks in this section and run the Dell Diagnostics before you contact Dell for technical assistance. NOTICE: The Dell Diagnostics works only on Dell™ computers. Start the Dell Diagnostics from either your hard drive or from the Drivers and Utilities CD (also known as the ResourceCD). Starting the Dell Diagnostics From Your Hard Drive The Dell Diagnostics is located on a hidden diagnostic utility partition on your hard drive. NOTE: If your computer cannot display a screen image, contact Dell (see page 109). Shut down the computer (see page 85). Connect the computer to an electrical outlet. Turn on the computer. When the DELL™ logo appears, press immediately. NOTE: If you cannot see anything on your display, hold down the key and press the computer’s power button to begin the Dell Diagnostics. The computer automatically runs the Pre-boot System Assessment. NOTE: If you see a message stating that no diagnostics utility partition has been found, run the Dell Diagnostics from your Drivers and Utilities CD. If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop. Then shut down your computer (see page 85) and try again. Solving Problems 57 www.dell.com | support.dell.com When the boot device list appears, highlight Diagnostics and press . The computer runs the Pre-boot System Assessment, a series of initial tests of your system board, keyboard, hard drive, and display. • During the assessment, answer any questions that appear. • If a failure is detected, the computer stops and beeps. To stop the assessment and restart the computer, press ; to continue to the next test, press ; to retest the component that failed, press . • If failures are detected during the Pre-boot System Assessment, write down the error code(s) and contact Dell (see page 109) before continuing on to the Dell Diagnostics. If the Pre-boot System Assessment completes successfully, you receive the message Booting Dell Diagnostic Utility Partition. Press any key to continue. Press any key to start the Dell Diagnostics from the diagnostics utility partition on your hard drive. Starting the Dell Diagnostics From the Drivers and Utilities CD Insert the Drivers and Utilities CD. Shut down (see page 85) and restart the computer. When the DELL logo appears, press immediately. If you wait too long and the Windows logo appears, continue to wait until you see the Windows desktop. Then shut down your computer (see page 85) and try again. NOTE: The next steps change the boot sequence for one time only. On the next start-up, the computer boots according to the devices specified in system setup. 58 When the boot device list appears, highlight CD/DVD/CD-RW Drive and press . Select the CD/DVD/CD-RW Drive option from the CD boot menu. Select the Boot from CD-ROM option from the menu that appears. Type 1 to start the ResourceCD menu. Type 2 to start the Dell Diagnostics. Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions are listed, select the version appropriate for your computer. When the Dell Diagnostics Main Menu appears, select the test you want to run (see page 59). Solving Problems Dell Diagnostics Main Menu After the Dell Diagnostics loads and the Main Menu screen appears, click the button for the option you want. Option Function Express Test Performs a quick test of devices. This test typically takes 10 to 20 minutes and requires no interaction on your part. Run Express Test first to increase the possibility of tracing the problem quickly. Extended Test Performs a thorough check of devices. This test typically takes an hour or more and requires you to answer questions periodically. Custom Test Tests a specific device. You can customize the tests you want to run. Symptom Tree Lists the most common symptoms encountered and allows you to select a test based on the symptom of the problem you are having. If a problem is encountered during a test, a message appears with an error code and a description of the problem. Write down the error code and problem description and follow the instructions on the screen. If you cannot resolve the error condition, contact Dell (see page 109). NOTE: The Service Tag for your computer is located at the top of each test screen. If you contact Dell, technical support will ask for your Service Tag. If you run a test from the Custom Test or Symptom Tree option, click the applicable tab described in the following table for more information. Tab Function Results Displays the results of the test and any error conditions encountered. Errors Displays error conditions encountered, error codes, and the problem description. Help Describes the test and may indicate requirements for running the test. Solving Problems 59 www.dell.com | support.dell.com Tab Function Configuration Displays your hardware configuration for the selected device. The Dell Diagnostics obtains configuration information for all devices from system setup, memory, and various internal tests, and it displays the information in the device list in the left pane of the screen. The device list may not display the names of all the components installed on your computer or all devices attached to your computer. Parameters Allows you to customize the test by changing the test settings. When the tests are completed, if you are running the Dell Diagnostics from the Drivers and Utilities CD, remove the CD. When the tests are complete, close the test screen to return to the Main Menu screen. To exit the Dell Diagnostics and restart the computer, close the Main Menu screen. Drivers What Is a Driver? A driver is a program that controls a device such as a printer, mouse, or keyboard. All devices require a driver program. A driver acts like a translator between the device and any other programs that use the device. Each device has its own set of specialized commands that only its driver recognizes. Dell ships your computer to you with required drivers already installed—no further installation or configuration is needed. NOTICE: The Drivers and Utilities CD may contain drivers for operating systems that are not on your computer. Ensure that you are installing software appropriate for your operating system. Many drivers, such as the keyboard driver, come with your Microsoft® Windows® operating system. You may need to install drivers if you: • Upgrade your operating system. • Reinstall your operating system. • Connect or install a new device. Identifying Drivers If you experience a problem with any device, identify whether the driver is the source of your problem and, if necessary, update the driver. 60 Solving Problems Windows XP Click the Start button and click Control Panel. Under Pick a Category, click Performance and Maintenance. Click System. In the System Properties window, click the Hardware tab. Click Device Manager. Scroll down the list to see if any device has an exclamation point (a yellow circle with a [!]) on the device icon. If an exclamation point is next to the device name, you may need to reinstall the driver or install a new driver as described in the following section. Reinstalling Drivers and Utilities NOTICE: The Dell Support website at support.dell.com and your Drivers and Utilities CD provide approved drivers for Dell™ computers. If you install drivers obtained from other sources, your computer might not work correctly. Using Windows XP Device Driver Rollback If a problem occurs on your computer after you install or update a driver, use Windows XP Device Driver Rollback to replace the driver with the previously installed version. Click the Start button and click Control Panel. Under Pick a Category, click Performance and Maintenance. Click System. In the System Properties window, click the Hardware tab. Click Device Manager. Right-click the device for which the new driver was installed and click Properties. Click the Drivers tab. Click Roll Back Driver. If Device Driver Rollback does not resolve the problem, then use System Restore to return your computer to the operating state that existed before you installed the new driver. Solving Problems 61 www.dell.com | support.dell.com Using the Drivers and Utilities CD If using Device Driver Rollback or System Restore does not resolve the problem, then reinstall the driver from the Drivers and Utilities CD. Save and close any open files, and exit any open programs. Insert the Drivers and Utilities CD. In most cases, the CD starts running automatically. If it does not, start Windows Explorer, click your CD drive directory to display the CD contents, and then double-click the autorcd.exe file. The first time that you run the CD, it might prompt you to install setup files. Click OK, and follow the instructions on the screen to continue. From the Language drop-down menu in the toolbar, select your preferred language for the driver or utility (if available). A welcome screen appears. Click Next. The CD automatically scans your hardware to detect drivers and utilities used by your computer. After the CD completes the hardware scan, you can also detect other drivers and utilities. Under Search Criteria, select the appropriate categories from the System Model, Operating System, and Topic drop-down menus. A link or links appear(s) for the specific drivers and utilities used by your computer. Click the link of a specific driver or utility to display information about the driver or utility that you want to install. Click the Install button (if present) to begin installing the driver or utility. At the welcome screen, follow the screen prompts to complete the installation. If no Install button is present, automatic installation is not an option. For installation instructions, either see the appropriate instructions in the following subsections, or click Extract, follow the extracting instructions, and then read the readme file. If instructed to navigate to the driver files, click the CD directory on the driver information window to display the files associated with that driver. Manually Reinstalling Drivers 62 After extracting the driver files to your hard drive as described in the previous section, click the Start button and right-click My Computer. Click Properties. Click the Hardware tab and click Device Manager. Double-click the type of device for which you are installing the driver (for example, Modems or Infrared devices). Double-click the name of the device for which you are installing the driver. Solving Problems 6 Click the Driver tab and click Update Driver. Click Install from a list or specific location (Advanced) and click Next. Click Browse and browse to the location to which you previously extracted the driver files. When the name of the appropriate driver appears, click Next. 10 Click Finish and restart your computer. Resolving Software and Hardware Incompatibilities If a device is either not detected during the operating system setup or is detected but incorrectly configured, you can use the Hardware Troubleshooter to resolve the incompatibility. To resolve incompatibilities using the Hardware Troubleshooter: Click the Start button and click Help and Support. Type hardware troubleshooter in the Search field and click the arrow to start the search. Click Hardware Troubleshooter in the Search Results list. In the Hardware Troubleshooter list, click I need to resolve a hardware conflict on my computer, and click Next. Using Microsoft® Windows® XP System Restore The Microsoft® Windows® XP operating system provides System Restore to allow you to return your computer to an earlier operating state (without affecting data files) if changes to the hardware, software, or other system settings have left the computer in an undesirable operating state. See the Windows Help and Support Center for information on using System Restore. To access help, see page 10. NOTICE: Make regular backups of your data files. System Restore does not monitor your data files or recover them. Creating a Restore Point Click the Start button and click Help and Support. Click System Restore. Follow the instructions on the screen. Solving Problems 63 www.dell.com | support.dell.com Restoring the Computer to an Earlier Operating State If problems occur after you install a device driver, use Device Driver Rollback (see page 61) to resolve the problem. If that is unsuccessful, then use System Restore. NOTICE: Before you restore the computer to an earlier operating state, save and close any open files and exit any open programs. Do not alter, open, or delete any files or programs until the system restoration is complete. Click the Start button, point to All Programs→ Accessories→ System Tools, and then click System Restore. Ensure that Restore my computer to an earlier time is selected and click Next. Click a calendar date to which you want to restore your computer. The Select a Restore Point screen provides a calendar that allows you to see and select restore points. All calendar dates with available restore points appear in boldface type. Select a restore point and click Next. If a calendar date has only one restore point, then that restore point is automatically selected. If two or more restore points are available, click the restore point that you prefer. Click Next. The Restoration Complete screen appears after System Restore finishes collecting data and then the computer restarts. After the computer restarts, click OK. To change the restore point, you can either repeat the steps using a different restore point, or you can undo the restoration. Undoing the Last System Restore NOTICE: Before you undo the last system restore, save and close all open files and exit any open programs. Do not alter, open, or delete any files or programs until the system restoration is complete. Click the Start button, point to All Programs→ Accessories→ System Tools, and then click System Restore. Click Undo my last restoration and click Next. Click Next. The System Restore screen appears and the computer restarts. 64 After the computer restarts, click OK. Solving Problems
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2004:07:26 09:41:23 Producer : Acrobat Distiller 4.0 for Windows Author : 1 Title : Molokai_Manual_D5813bk0_part 1..PDF Modify Date : 2004:07:26 09:43:12-07:00 Page Count : 64 Page Mode : UseThumbsEXIF Metadata provided by EXIF.tools