Delonghi Gb 5715110421 Owner S Manual 01

2014-07-05

: Delonghi Delonghi-Gb-5715110421-Owner-S-Manual delonghi-gb-5715110421-owner-s-manual delonghi pdf

Open the PDF directly: View PDF .
Page Count: 19

Download
Open PDF In Browser	View PDF

IMPORTANT SAFEGUARDS
• Use this appliance only as described in this
instruction manual.
As with all electrical equipment, whilst the
instructions aim to cover as many eventualities as possible, caution and common sense
should be applied when operating and installing this appliance.
• This appliance is designed for home air conditioning and must not be used for other purposes.
• It is dangerous to modify or alter the characteristics of the appliance in any way.
• The appliance must be installed in conformity with national legislation regulating electrical equipment and installations.
• If the appliance requires repair, contact a
Service Centre authorised by the manufacturer only.
Repairs carried out by unauthorised personnel may be dangerous.
• This appliance must be used exclusively by
adults.
The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
• The appliance must be connected to an efficient earth system.
Have your electrical circuit checked by a qualified electrician.
• Do not use extension cables.
• Before cleaning or maintenance, always unplug the appliance from the mains socket.
• Never unplug the appliance by pulling on the
power cable.
• Do not install the appliance in rooms containing gas, oil or sulphur. Do not install near
sources of heat. .
• Keep the appliance at least 50 cm away from
flammable substances (alcohol etc) or pressurised containers (eg aerosol cans).
• Do not rest heavy or hot objects on top of the
appliance.

• Clean the air filter at least once a week.
• Avoid using heating appliances near the air
conditioner.
• Always transport the appliance upright or resting on one side.
Before moving the appliance, empty the internal circuit completely of water.
After moving the appliance, wait at least 1
hour before starting it
• When putting the appliance away, do not cover with plastic bags.
• The materials used for packaging can be recycled.
You are therefore recommended to dispose
of them in special differentiated waste collection containers.
• At the end of its working life, consign the appliance to a specialist collection centre.
• If the power cable is damaged, it must be replaced by the manufacturer or an authorised
technical service centre in order to avoid all
risk.
Check the type of refrigerant gas used by your
appliance on the rating plate.

Specific warnings for appliances with
R410A refrigerant gas

R410A refrigerant gas conforms to EC regulations on the environment.
Avoid perforating the refrigerant circuit of the
appliance.
ENVIRONMENTAL INFORMATION:
This unit contains fluorinated greenhouse gases
covered by the Kyoto Protocol.
Maintenance and disposal must be carried out by
qualified personnel only (R410A, GWP=1975).

Specific warnings for appliances with
R290 refrigerant gas

• Read the warnings carefully.
• When defrosting or cleaning, use only
the implements recommended by the
manufacturer.
• The appliance must be placed in a room
without continuously operating sources
of ignition (for example: open flames, an
operating gas appliance or an operating
electric heater).
• Do not pierce or burn.
21

• Refrigerant gas may be odourless.
• The appliance must be installed, used and
stored in a room with a surface area greater
than 15 m².
• This appliance contains about 300 g of R290
refrigerant gas.
• R290 refrigerant gas complies with European
environmental directives.
Do not perforate any of the components in
the refrigerant circuit.
• If the appliance is installed, used or stored
in an unventilated room, the room must be
such as to prevent stagnation of possible
leaks of refrigerant gas as there could be a
danger of fire or explosion hazard should the
refrigerant come into contact with electric
heaters, stoves or other sources of ignition.
• The appliance must be stored in such a way
as to prevent mechanical faults.
• Persons working on a refrigerant circuit must
have the relative authorisation issued by an
accredited body certifying their competence
to handle refrigerants in compliance with a
standard assessment recognised by sector
associations.
• All repairs must be carried out in accordance
with the manufacturer’s recommendations.
Maintenance and repairs requiring the
assistance of other qualified personnel
must be carried out under the supervision
of specialists in the use of inflammable
refrigerants.

ELECTRICAL CONNECTIONS

Before plugging the appliance into the mains
socket, check that:
• the mains power supply corresponds to the
value indicated on the rating plate on the
back of the appliance;
• the power socket and electrical circuit are
adequate for the appliance.
• the mains socket matches the plug. If this is
not the case, have the plug replaced;
• the mains socket is adequately earthed.
Failure to follow these important safety
instructions absolves the manufacturer of all
liability.

WHAT IS THE WATER-AIR PINGUINO

During the summer, you feel comfortable at a
temperature of between 24 and 27° C with a relative humidity of about 50%.
An air conditioner removes excess moisture and
heat from the room where it is located.
Compared with wall mounted models, portable
air conditioners have the advantage that they can
be moved from one room to another in the home
or be transported from one building to another.
Hot air from the room is passed through a coil
cooled by refrigerant gas. Excess heat and moisture are removed before the air is re-emitted
into the room.
In single unit models, a small part of this air is
used to cool the refrigerant gas and then, when
hot and damp, is discharged outside.
In exclusive De’longhi water-air models, the heat
is removed from the room through the cooling
effect of the water which is obviously much greater than air.
This gives this air conditioner unbeatable cooling
efficiency.

Important information for correct disposal of
the product in accordance with EC Directive
2002/96/EC.
At the end of its working life, the
product must not be disposed of as
urban waste.
It must be taken to a special local
authority
differentiated
waste
collection centre or to a dealer
providing this service.
Disposing of a household appliance separately
avoids possible negative consequences for
the environment and health deriving from
inappropriate disposal and enables the
constituent materials to be recovered to obtain
significant savings in energy and resources.As
a reminder of the need to dispose of household
appliances separately, the product is marked
with a crossed-out wheeled dustbin.

Description
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V

Air outlet grille
Control panel with advanced LCD display
Handle
Grille
Castors
Air intake grille with dust filter
Condensate drain connector
Power cable
Pull out tank
Tank door
Air exhaust hose
Remote control
Air exhaust hose housing
Window outlet
Silver ion filter (certain models only)
Electrostatic filter (certain models only)
Sucker
Castor locks
Flange with cap
Adjustable bar
Water drain hose + cap
Indicator paper

D
J
I
E

K
L

S
T

N
M

R
Q
P

V
H
23

PREPARING FOR USE

The instructions below will enable you to prepare
your air conditioner for operation as efficiently
as possible.
Before use, make sure the air intake and outlet
grilles are unobstructed.

Air-conditioning without installation

Just a few simple steps and your comfort is ensured with your appliance:
• Fit the air exhaust hose in the housing at the
back of the appliance (fig. 1).

You can also use the “adjustable bar” accessory
(T).
• Fit the window outlet in the housing in the
bar (fig. 4)

• Position the bar on the window sill and
adjust until it fits in the guides of the blind
(the length can be blocked with the pin provided), then lower the blind (fig. 5).

• Fit the window outlet (N) to the end of the
hose (K).
• Place the air conditioner near a window or
French window.
• Adjust the length of the hose to reach the
window.
• Make sure the air exhaust hose is unobstructed.
• Open the window or French window slightly
and position the outlet (fig. 2).

5
2
1

2
• Fit the air hose to the end of the window outlet .
• Place the air conditioner near a window or
French window and connect the end of the
hose (fig. 7).
• Remove the cap at the back of the appliance
(G) and replace with the drain hose plus cap
(U) as shown in figure 6.
This enables the condensate to be drained
more easily at the end of the season.
See the section: “END OF SEASON OPERATIONS”.

• If you have a double window, use the sucker
(Q) provided to hold the two parts of the window together (fig. 3).
24

10
5 inch
134

1
in the window pane

11
2

Keep the air hose as short and free of curves as possible to avoid bottlenecks.

in the wooden kickboard of a French window

Air-conditioning with installation

If required, your appliance can be installed semipermanently (Fig. 8).
Proceed as follows:
• Drill a 134 mm dia. hole in an outside wall
or through a window pane, respecting the
heights shown in fig. 9.

in the wall: you are recommended to insulate
the section of wall using suitable insulation.

• Fit the air exhaust hose (K) in the housing at the back of the appliance (fig.
1).
• Fit the end of the hose to the flange (S).
When the hose is not fitted, the hole can
be closed with the flange cap.
• Remove the cap at the back of the appliance (G) and replace with the drain
hose plus cap (U) as shown in figure 6.
This enables the condensate to be drained more easily at the end of the season.
See the section: “END OF SEASON OPERATIONS”.

12 inch
30 cm
12 inch
30 cm

• Fit the flange accessory (S) provided in the
hole following the indications in figs. 10, 11
and 12.

9
MAX 39 inch

Keep the air hose as short and free of curves as possible to avoid bottlenecks.
When installing the air conditioner semipermanently, you should leave a door slightly
open, as little as 1 cm, to guarantee correct
ventilation.

MIN 14 inch

PREPARING FOR OPERATION IN WATER MODE

• Immerse the paper completely in a glass of
water for one second.
• Remove the paper from the water and shake lightly. After about a minute, 1, 2, 3, 4
or 5 red squares appear, depending on the
hardness of the water. The appliance can be
set to three different water hardness levels
soft (H1), medium (H2) and hard (H3). Determine the hardness of the water you will be
using by comparing the red squares on the
indicator paper with the table below.

Once the appliance has been installed, it is ready
for use.
However, its efficiency can be enhanced by operating it in the exclusive De’longhi water mode.
The water in the tank increases the cooling power of your Pinguino and at the same time reduces noise levels and electrical consumption.
Compared to air, water reduces the temperature
of the cooling circuit much more efficiently, before being given off from the air exhaust hose in
the form of vapour.
Remember that:
• You must always use salt-free clean mains
water.
• The length of time the water in the tank lasts
depends greatly on environmental conditions such as temperature, humidity, insulation, the exposure of the room, the number
of people present, etc.
Indicatively it lasts about six hours.
The BOOST function (see page 30) shortens
the operating time to about 4 hours, but the
cooling power and efficiency are increased.
• When the water in the tank runs out, the
light comes on and operation of the
appliance switches automatically to air-air. At
the same time, the quantity of air given out
from the rear hose increases.

Kind of water used
19

soft

Levels

Medium

H2
Hard

To set water hardness, proceed as follows:
1. Set the appliance to stand-by.
2. Hold the FAN button on the control panel
down for 10 seconds. The appliance emits a
beep and H1, H2 or H3 is displayed.
3. Use the + or - buttons to set the hardness
level according to the table below. Wait a few
seconds for the setting to be memorised.
The appliance emits another beep and goes
back to stand-by.

The appliance is fitted with a resin limescale filter enabling normal tap water to be
used.
The impregnated resins reduce water hardness
and therefore prolong the working life of the
appliance.

The machine is set by default for medium
hardness (H2).

“CF” is displayed when the limescale filter needs replacing. The efficacy of the filter
depends on water hardness. It should, however, be replaced every five years.

Filling the tank

The water tank is located at the bottom of the
appliance. Remove the tank by inserting the hand
through the door above the word “PULL” (fig.
13) and pulling the tank out as far as it will go.
Remove the cap and use a container (bottle, jug,
watering can) to pour in the water (fig. 14/15).
You can see when the tank is full through the fil-

Setting water hardness

Measure water hardness using the indicator paper provided.
• Remove the indicator paper from its pack
(V).
26

Replacing the limescale filter

ling hole. It holds a maximum of 10 litres.

Turn the appliance off and unplug from the
mains.
Make sure there is no water in the appliance by
emptying the tank and internal tray as described
in the section: “End of season operations”.
Lay the appliance on its back as shown in figure
17. Rest it on a towel or piece of cardboard to
avoid scratches or damage. Remove the filter cover by unscrewing the four screws (fig. 17).
Remove the filter delicately and loosen the two
ties, making sure the two hoses connecting the
filter do not slip inside the appliance. Fit the new
filter, following the same procedure in reverse
(fig. 16/15). The pawl on the filter (see figure)
indicates the correct direction. The pawl must always be towards the inside of the appliance and
point “A” must be facing upwards.

Water may leak out while replacing the
limescale filter. You should therefore perform
the operation in a suitable location.
After replacing the filter, wait at least an hour
before starting the machine again.

Replace the cap correctly and close the tank, pushing it in as far as it will go. The tank hole has a
mesh filter to prevent the introduction of foreign
matter. If necessary, this filter can be unscrewed
and removed for cleaning under running water.
• The tank does not have to be full to use the
water function, but the length of time the
appliance will operate in water mode will be
shorter.
• Do not fill above the level of the hole to avoid
the water overflowing. The tank has no overflow prevention system.

When the filter has been replaced, turn the
alarm off by pressing the ON/STAND-BY
button (15) for 10 seconds.
The appliance emits a beep.

button
15 ON/Standby button
16 MODE button (selects the modes)
17 Signal receiver

Resin filter

2 6

Cover

11
17
13

16
14

19
OPERATING FROM THE CONTROL PANEL

The control panel enables you to manage all the
main functions of the appliance. To fully exploit
its potential, you must use the remote control
unit.

Turning the appliance on

• Plug into the mains socket.
Two lines appear on the display indicating
that the appliance is in standby (fig. 20).
• Press the button until the appliance comes on. The last function active when it was
turned off will appear.
• Never turn the air conditioner off by unplugging from the mains. Always press the
button, then wait for a few minutes before
unplugging. This allows the appliance to perform a cycle of checks to verify operation.

DESCRIPTION OF THE CONTROL PANEL WITH ADVANCED LCD DISPLAY
1 Air conditioning symbol
2 Dehumidifying symbol
3 Fan symbol
4 SMART symbol
5 BOOST symbol
6 SLEEP symbol
7 Alarm symbol
8 Temperature indicator
9 “No water” symbol
10 Timer symbol
11 Speed indicator
12 AUTOFAN indicator
13 FAN button
14 Increase (+) and decrease (-) temperature

4
12

1 2 3

Air conditioning
mode (fig. 21)
17

Dehumidifying mode (fig. 22)

Ideal to reduce room humidity (spring and autumn, damp rooms, rainy periods, etc).
In dehumidifying
mode, the appliance should be
13
prepared in the same way as for air conditioning,
with the air exhaust hose attached to enable the
moisture to be discharged outside.
To set this mode correctly:
• Press the MODE button a number of times
until the dehumidifying symbol appears.

Ideal for hot muggy weather when you need to
cool and dehumidify the room.
16To set this mode correctly:13
• Press the MODE button a number of times
until the air-conditioning symbol appears.
• Select the target temperature5by pressing
14 the or button until the corresponding
value is displayed.
8
• Select the required fan speed by pressing
10
the button.
Four speeds are available:
12

In this mode, fan speed is selected automatically by the appliance and cannot be set manually.

Maximum speed: to achieve the target
temperature as rapidly as possible15

Medium speed: reduces noise levels
but still maintains a good level of comfort

Low speed: for silent operation
20
AUTOFAN: the appliance automatically
selects the most suitable fan speed in relation to
21
the temperature set on the digital display.

1 2 3

The most suitable temperature for the room during the summer varies from 24 to22
27°C.
You are recommended, however, not to set a
temperature much below the outdoor temperature.

Fan mode (fig. 23)

When using the appliance in this mode, the air
hose does not need to be attached.
5
To set this mode correctly:
• Press the MODE button a number of times
until the fan symbol appears.
8
• Select the required fan speed by pressing
10
the button.
Three speeds are available: 12

11
High speed: for maximum fan power

7
9
13
14
17

Medium speed: reduces16
noise levels
but still maintains a good level of comfort.
Minimum speed: for silent19
operation

In this mode, AUTO speed cannot be selected.

24
23

21
29

11 TIMER ON symbol
12 Timer OFF symbol
13 Clock
14 ON/Standby button
15 FAN button
16 Increase (+) and decrease (-) temperature
button
17 MODE button (selects the modes)
18 Reset button (resets the appliance to the original settings)
19 OK button
20 Timer OFF button
21 °C or °F selection button
22 SLEEP button
23 BOOST button
24 Timer ON button

Modalità SMART (fig. 24)

SMART mode tries to recreate ideal comfort conditions in the room. The appliance automatically
establishes whether to operate in air conditioning, fan or stand-by mode depending on the
environmental conditions detected.
To set this mode:
• Press the MODE button a number of times
until the SMART symbol appears.
• Choose the required fan speed.

1 2 3

DESCRIPTION OF THE REMOTE CONTROL

7
9
13
14
17

8
10
12
11
15
16

19
20

1 Air conditioning symbol
2 Dehumidifying symbol
3 Fan symbol
4 SMART symbol
5 Selected temperature scale indicator
6 Signal transmission
7 BOOST symbol
8 SLEEP symbol
9 AUTOFAN indicator
10 Fan speed indicator

21
22

USING THE REMOTE CONTROL

lease the button and press the OK button to
confirm.
• To cancel the settings programmed on the
remote control and restore the original settings, press the button lightly with the
point of a pencil or pen.

• Point the remote control at the receiver on
the appliance. The remote control must be
no more than 7 metres away from the appliance (without obstacles between the remote control and the receiver).
• The remote control must be handled with
extreme care. Do not drop it or expose it to
direct sunlight or sources of heat.

USING THE REMOTE CONTROL UNIT

The first part of the controls on the remote control are the same as those on the control panel of
the appliance (fig. 26).
You should therefore refer to the instructions in
the chapter Operating from the control
panel to
• turn the appliance on or off and
• select the operating mode (air conditioning,
dehumidifying, fan or Smart) and the fan
speed.
• set the required temperature.

MAX. 7 metres

Inserting or replacing the batteries

• Remove the cover on the rear of the remote
control (fig. 25);
• Insert two R03 “AAA” 1.5V batteries in the
correct position (see instructions inside the
battery compartment);
• Replace the cover.

The following section describes the additional
functions corresponding to the controls on the
bottom part of the remote control.

If the remote control unit is replaced or disposed of, the batteries must be removed
and discarded in accordance with current
legislation as they are harmful to the environment.

Setting the time

After having inserted the batteries, the clock on
the display flashes until the time is set.
Proceed as follows.
• Press the or button until the correct
time is reached.
Hold the button down to run rapidly through
first the minutes, then the tens of minutes.
• Once the correct time has been reached, re31

BOOST function (fig. 27)

Ideal for the summer to cool rooms rapidly.
Activate by simply pressing the button.
The appliance operates in air conditioning mode
at maximum fan speed and maximum power.
While this function is selected, it is not possible
to set the temperature or change fan speed.

Sleep function (fig. 29)

This function is useful for the night as it gradually reduces operation of the appliance, turning it
off after 8 hours.
To set this function correctly:
• Select the operating mode (air conditioning,
dehumidifying, smart) as described above.
• Press the button.
The appliance operates in the previously
selected mode with the lowest possible fan
speed.
Fan speed is always at minimum, while room
temperature and humidity vary gradually to ensure the most comfortable conditions.
During air conditioning, the temperature increases by 1°C after 60 minutes and a further 1°C
after 2 hours.
In dehumidifying mode, the dehumidifying power of the appliance is partially reduced every
hour for the first two hours.

When the BOOST function is active, the
water lasts less time than in air conditioning
mode. On the other hand, the cooling power
and efficiency of the appliance are higher.

Selecting the temperature scale
(fig. 28)
Press the button to switch the temperature
display from °C to °F and vice versa.

PROGRAMMING THE TIMER

The timer can be programmed to start and stop
the appliance when required.

Programming start up

• Press the button.
The start-up time and symbol flash on
the remote control display (fig. 30).
• Press the or buttons to set the time
you want the appliance to start up.
• When that time is reached, press the OK button to confirm (fig. 31). The symbol remains displayed on the remote control and
the symbol is displayed on the appliance to indicate that the timer is active.

If you need to disable the timer on or off programme in advance, press the or button respectively twice.

Programming shutdown

• Press the OFF button. The shutdown
time and symbol flash on the remote
control display (fig. 32).
• Press the or buttons to set the
time you want the appliance to shut down.
• When that time is reached, press the OK button to confirm (fig. 33). The symbol remains displayed on the remote control and
the symbol is displayed on the appliance to indicate that the timer is active.

SELF-DIAGNOSIS

The appliance has a self diagnosis system to identify a number of malfunctions.
Error messages are displayed on the appliance display.

IF ... IS DISPLAYED,

...WHAT SHOULD I DO?
The appliance is fitted with a frost protection device to avoid excessive formation
of ice. The appliance starts up again automatically when the defrosting process is
completed.

Low Temperature
(frost prevention)
Empty the internal safety tank following the instructions in the section “End of season
operations”. If it reoccurs, contact your local authorised customer services.

High Level

(internal tray full)
When this message is displayed, the water filter needs replacing as described in the
section: “Replacing the limescale filter”.

Change filter

IF ... IS DISPLAYED,

...WHAT SHOULD I DO?
If this is displayed, contact your local authorised service centre.

Probe Failure
(sensor damaged)
When the F1 alarm is active, the appliance continues functioning normally in air-air
mode.
To reset the alarm, unplug the appliance then plug in again.
If the alarm reoccurs frequently, contact customer services.

Failure1

TIPS FOR CORRECT USE

To get the best from your air conditioner, follow
these recommendations:
• close the windows and doors in the room to
be air conditioned (fig. 34).
When installing the air conditioner semi-permanently, you should leave a door slightly
open (as little as 1 cm) to guarantee correct
ventilation.

do not cover
the appliance

• make sure the air conditioner is standing on
a level surface.
If necessary, place the castor locks under the
front wheels.

AIR PURIFYING FILTERS

This appliance is fitted with two dust filters to
maintain efficiency.
One is at the back near the intake grille, the other
is at the side (fig. 37-38).

close doors and windows
• Protect the room from direct exposure to the
sun by partially closing curtains and/or blinds to make the appliance much more economical to run (fig. 35);

close curtains

• never rest objects of any kind on the air conditioner;
• do not obstruct the air intake and outlet (fig.
36). Leave both grilles free;
• make sure there are no heat sources in the
room;
• never use the appliance in very damp rooms
(laundries for example);
• never use the appliance outdoors;
35

CLEANING

Certain models have a silver ion dust filter and
an additional electrostatic filter in the grill at the
back

Before cleaning or maintenance, turn the appliance off by pressing the button on the control
panel or remote control, wait for a few seconds
then unplug from the mains socket.

Silver ion filter

This dust filter is treated with silver ions which
not just retain dust particles, but also have an
efficient antibacterial action. It also greatly reduces concentrations of irritants such as pollen and
spores.

Cleaning the cabinet

You should clean the appliance with a slightly
damp cloth then dry with a dry cloth.

The electrostatic filter retains the finest dust particles, thus enhancing the filtering capacity of the
appliance.

• Do not wash the air conditioner with water. It
could be dangerous.
• Do not use petrol, alcohol or solvents to clean the appliance.
Do not spray insecticide liquids or similar.

Fitting the filters to the grille

Cleaning the air filters

Electrostatic filter

To keep your air conditioner working efficiently,
you should clean the dust filters every week of
operation.

The appliance can be used with just the dust filters already inserted in the grille.
To use the two supplementary filters (if provided
with your model), remove them from the packaging and attach them to the dust filter, inserting
them under the special clips (fig. 39).
If you decide not to use it, keep it sealed in the
packaging.

Cleaning the dust filters supplied with all
models

Each filter is housed in the intake grille.
To clean the filters, proceed as follows
• Remove the intake grille by pulling it outwards (fig. 37).
• Remove the dust filter by detaching it from
the grille (Fig. 38).
• Use a vacuum cleaner to remove the dust
collected on the filter.
If it is very dirty, immerse in warm water and
rinse a number of times.
• After washing, leave the filter to dry completely.
• To replace, put the filters back in the intake
grille then attach the intake grille to the appliance.

Silver ion
filter
Electrostatic filter

Cleaning of the silver ion filter and of the
electrostatic filter (certain models only)

To clean the silver ion dust filter, the electrostatic
filter must be temporarily removed.
To clean the filters, use a vacuum cleaner at medium power.
The silver ion filter can be washed with lukewarm
water. Leave to dry completely and replace.
The electrostatic filter is not washable but it
should be replaced at least once every two seasons.
The electrostatic filter can be bought from shops
selling De’longhi accessories or authorised service centres.

Emptying the internal tank
To facilitate this operation, at the start of the season, replace the spout cap (G) with the drain
hose + cap (U).

START OF SEASON OPERATIONS

Place a recipient (such as a jug or bottle) near
the spout on the back of the appliance (fig. 40).
Remove the cap and run off any water left.

Make sure the power cable and plug are undamaged and the earth system is efficient. Follow the
installation instructions precisely.

When completely empty, replace the cap.
IMPORTANT: the tank could contain as much as
2 litres of water.

END OF SEASON OPERATIONS
Before putting the appliance away or moving it
to another location, empty any water left in the
tanks.

Emptying the tank
Pull out the tank as described in the section:
“FILLING THE TANK”. Unhook the drain hose on
the left of the tank (fig. 40-41) and place the end
in a recipient. Remove the cap and drain off the
water left in the tank.
• After performing the 2 operations described above, operate the appliance in fan only
mode for about half an hour. This dries any
water remaining inside the appliance.
• Turn the appliance off and unplug from the
mains.
• Remove the air exhaust hose and condensate drain hose.
• Clean the dust filters.
• Cover the appliance to avoid dust.

TECHNICAL CHARACTERISTICS:
Power supply voltage

see rating plate

Maximum absorbed power
in air conditioning

“

Refrigerant

“

Cooling capacity

“

Limit conditions
Room temperature for air conditioning 21÷35°C

GUARANTEE
The terms of the guarantee and technical assistance are given in the documentation accompanying your appliance.

TROUBLESHOOTING
problem

CAUSE

SOLUTION

The air conditioner
does not come on

•
•
•

there is no current
it is not plugged into the mains
the internal safety device has tripped

•
•
•

wait
plug into the mains
call the Service Centre

The air conditioner
works for a short time
only

•

there are bends or kinks in the air
exhaust hose

•

something is preventing the air from
being discharged

•

position the air hose correctly, keeping
it as short and free of curves as possible
to avoid bottlenecks.
check and remove any obstacles
obstructing air discharge

The air conditioner
works, but does not
cool the room

•

windows, doors and/or curtains open

•

there are heat sources in the room
(oven, hairdryer, etc)

•

the air exhaust hose is detached from
the appliance

•

fit the air exhaust hose in the housing at
the back of the appliance (fig. 1).

• dust filters clogged
• the technical specification of the
appliance is not adequate for the room
in which it is located.

•

clean or replace the filters as described
above

During operation, there
is an unpleasant smell
in the room

• dust filter and (when present)
electrostatic filter clogged

•

clean the filters as described above

The air conditioner
does not operate for
about three minutes
after restarting it

•

the internal compressor safety device
prevents the appliance from being
restarted until three minutes have
elapsed since it was last turned off.

•

wait. This delay is part of normal
operation.

The symbol and
one of the following
messages
LT / HL/Cf/PF / FI
appears on the
appliance display:

•

The appliance has a self diagnosis
system to identify a number of
malfunctions.

•

See the SELF-DIAGNOSIS chapter.

close doors, windows and curtains,
bearing in mind the “tips for
correct use” given above
eliminate the heat sources

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.1-c037 46.282696, Mon Apr 02 2007 18:36:56
Instance ID                     : uuid:d57bf2cc-f3a0-8245-895b-aaea5d4cd6e2
Document ID                     : adobe:docid:indd:598c6421-9024-11df-8180-c40758b9b1fb
Rendition Class                 : proof:pdf
Derived From Instance ID        : 51104ea4-fd33-11de-9ce7-c4b261dcecd9
Derived From Document ID        : adobe:docid:indd:31e34b37-e24e-11de-ad26-f05613993da8
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:DAFE9ED7EFB311DEAD2BD2AD300E41FB, uuid:2F7FC31DE64311DEA10185B6FC004142, uuid:2F7FC31EE64311DEA10185B6FC004142, uuid:9D6DD5DDEBC511DEA5DAD7C7C1CB4192, uuid:2F7FC320E64311DEA10185B6FC004142, uuid:42CFBB05E66111DEA10185B6FC004142, uuid:1D1227F0E7C511DE8D9BB27F0CE6DC58, uuid:1D1227F3E7C511DE8D9BB27F0CE6DC58, uuid:E994519FED4611DEAA888FEE1D360B94, uuid:13A948C1E66411DEA10185B6FC004142, uuid:C49D8D7CE66311DEA10185B6FC004142, uuid:1D1227F0E7C511DE8D9BB27F0CE6DC58, uuid:1D1227F0E7C511DE8D9BB27F0CE6DC58, uuid:2F7FC322E64311DEA10185B6FC004142, uuid:1D1227F6E7C511DE8D9BB27F0CE6DC58, uuid:C92EF53DED5A11DEAA888FEE1D360B94, uuid:C92EF53DED5A11DEAA888FEE1D360B94, uuid:1D1227F0E7C511DE8D9BB27F0CE6DC58, uuid:1D1227F0E7C511DE8D9BB27F0CE6DC58, uuid:1D1227F0E7C511DE8D9BB27F0CE6DC58, uuid:897B4435FD3711DEB522DD7754F3DD5C, uuid:DAFE9ED9EFB311DEAD2BD2AD300E41FB, uuid:1D1227F0E7C511DE8D9BB27F0CE6DC58, uuid:1D1227F0E7C511DE8D9BB27F0CE6DC58, uuid:1D1227F0E7C511DE8D9BB27F0CE6DC58, uuid:D0B08755E7DE11DE8D9BB27F0CE6DC58, uuid:DAFE9ED8EFB311DEAD2BD2AD300E41FB, uuid:E99451A5ED4611DEAA888FEE1D360B94, uuid:9D6DD5E0EBC511DEA5DAD7C7C1CB4192, uuid:9D6DD5E1EBC511DEA5DAD7C7C1CB4192, uuid:DAFE9EDAEFB311DEAD2BD2AD300E41FB, uuid:E99451A6ED4611DEAA888FEE1D360B94, uuid:E26E7504E71511DEBC0BD4B5DC224D7A, uuid:4B420701E73211DEBC0BD4B5DC224D7A, uuid:4B420701E73211DEBC0BD4B5DC224D7A, uuid:E26E750AE71511DEBC0BD4B5DC224D7A, uuid:E99451A8ED4611DEAA888FEE1D360B94, uuid:3B5C08C3E72811DEBC0BD4B5DC224D7A, uuid:1D1227F0E7C511DE8D9BB27F0CE6DC58, uuid:E26E750AE71511DEBC0BD4B5DC224D7A, uuid:4B420701E73211DEBC0BD4B5DC224D7A, uuid:E99451A6ED4611DEAA888FEE1D360B94, uuid:E99451A6ED4611DEAA888FEE1D360B94, uuid:EEBF9010EC9311DE8010A7857E4E9D85, uuid:E26E750AE71511DEBC0BD4B5DC224D7A, uuid:E26E750AE71511DEBC0BD4B5DC224D7A, uuid:EEBF9010EC9311DE8010A7857E4E9D85, uuid:E26E750AE71511DEBC0BD4B5DC224D7A, uuid:E26E750AE71511DEBC0BD4B5DC224D7A, uuid:E26E750AE71511DEBC0BD4B5DC224D7A, uuid:4B420701E73211DEBC0BD4B5DC224D7A, uuid:3B5C08C4E72811DEBC0BD4B5DC224D7A, uuid:3B5C08C5E72811DEBC0BD4B5DC224D7A, uuid:EEBF9010EC9311DE8010A7857E4E9D85, uuid:3B5C08CAE72811DEBC0BD4B5DC224D7A, uuid:23C862F8F07111DE8B3B83F12F643BD8, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:1D1227F0E7C511DE8D9BB27F0CE6DC58, uuid:4B420701E73211DEBC0BD4B5DC224D7A, uuid:4B420701E73211DEBC0BD4B5DC224D7A, uuid:4B420701E73211DEBC0BD4B5DC224D7A, uuid:4B420703E73211DEBC0BD4B5DC224D7A, uuid:DAFE9EDCEFB311DEAD2BD2AD300E41FB, uuid:DAFE9EDBEFB311DEAD2BD2AD300E41FB, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:1D1227F0E7C511DE8D9BB27F0CE6DC58, uuid:E99451A0ED4611DEAA888FEE1D360B94, uuid:E99451A1ED4611DEAA888FEE1D360B94, uuid:E99451A2ED4611DEAA888FEE1D360B94, uuid:E99451A3ED4611DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:DB0D1463E73911DEBC0BD4B5DC224D7A, uuid:DB0D1463E73911DEBC0BD4B5DC224D7A, uuid:DB0D1463E73911DEBC0BD4B5DC224D7A, uuid:DB0D1463E73911DEBC0BD4B5DC224D7A, uuid:DB0D1463E73911DEBC0BD4B5DC224D7A, uuid:DB0D1465E73911DEBC0BD4B5DC224D7A, uuid:251B425EE73E11DEBC0BD4B5DC224D7A, uuid:11BB7E43EC8511DE8010A7857E4E9D85, uuid:DAFE9EDDEFB311DEAD2BD2AD300E41FB, uuid:EEBF9007EC9311DE8010A7857E4E9D85, uuid:C92EF540ED5A11DEAA888FEE1D360B94, uuid:C92EF53FED5A11DEAA888FEE1D360B94, uuid:66C7CE15EA5211DEAB7ED545D915D8F1, uuid:66C7CE0EEA5211DEAB7ED545D915D8F1, uuid:0A0C4C78EA2611DEAB7ED545D915D8F1, uuid:1D1227F0E7C511DE8D9BB27F0CE6DC58
Manifest Reference Document ID  : uuid:6D79DACCB97511DDBDF7A96A681B9848, uuid:111F8880C1E311DD8BAED13BE815F7F8, uuid:111F8882C1E311DD8BAED13BE815F7F8, uuid:13AC85FFE64211DEA10185B6FC004142, uuid:13AC8603E64211DEA10185B6FC004142, uuid:13AC8605E64211DEA10185B6FC004142, uuid:1D1227EFE7C511DE8D9BB27F0CE6DC58, uuid:42CFBB06E66111DEA10185B6FC004142, uuid:42CFBB0AE66111DEA10185B6FC004142, uuid:13A948C0E66411DEA10185B6FC004142, uuid:C49D8D7BE66311DEA10185B6FC004142, uuid:1D1227EFE7C511DE8D9BB27F0CE6DC58, uuid:1D1227EFE7C511DE8D9BB27F0CE6DC58, uuid:13AC8601E64211DEA10185B6FC004142, uuid:C49D8D77E66311DEA10185B6FC004142, uuid:C92EF53BED5A11DEAA888FEE1D360B94, uuid:C92EF53BED5A11DEAA888FEE1D360B94, uuid:1D1227EFE7C511DE8D9BB27F0CE6DC58, uuid:1D1227EFE7C511DE8D9BB27F0CE6DC58, uuid:1D1227EFE7C511DE8D9BB27F0CE6DC58, uuid:897B4433FD3711DEB522DD7754F3DD5C, uuid:EEBF900EEC9311DE8010A7857E4E9D85, uuid:1D1227EFE7C511DE8D9BB27F0CE6DC58, uuid:1D1227EFE7C511DE8D9BB27F0CE6DC58, uuid:1D1227EFE7C511DE8D9BB27F0CE6DC58, uuid:21155446E18E11DEB6E9F69928344725, uuid:21155444E18E11DEB6E9F69928344725, uuid:21155444E18E11DEB6E9F69928344725, uuid:DE370637E18D11DEB6E9F69928344725, uuid:0AD0C986E18611DEB6E9F69928344725, uuid:DE370631E18D11DEB6E9F69928344725, uuid:614C8401E25B11DE8286C8DBADD7B5A8, uuid:D6F88C10E25511DEB1C592445608063C, uuid:E26E7505E71511DEBC0BD4B5DC224D7A, uuid:E26E7505E71511DEBC0BD4B5DC224D7A, uuid:E26E7509E71511DEBC0BD4B5DC224D7A, uuid:E99451A7ED4611DEAA888FEE1D360B94, uuid:614C8401E25B11DE8286C8DBADD7B5A8, uuid:1D1227EFE7C511DE8D9BB27F0CE6DC58, uuid:E26E7509E71511DEBC0BD4B5DC224D7A, uuid:E26E7505E71511DEBC0BD4B5DC224D7A, uuid:614C8401E25B11DE8286C8DBADD7B5A8, uuid:614C8401E25B11DE8286C8DBADD7B5A8, uuid:704729BEE25211DEB1C592445608063C, uuid:E26E7509E71511DEBC0BD4B5DC224D7A, uuid:E26E7509E71511DEBC0BD4B5DC224D7A, uuid:704729BEE25211DEB1C592445608063C, uuid:E26E7509E71511DEBC0BD4B5DC224D7A, uuid:E26E7509E71511DEBC0BD4B5DC224D7A, uuid:E26E7509E71511DEBC0BD4B5DC224D7A, uuid:E26E7505E71511DEBC0BD4B5DC224D7A, uuid:614C8401E25B11DE8286C8DBADD7B5A8, uuid:614C8401E25B11DE8286C8DBADD7B5A8, uuid:704729BEE25211DEB1C592445608063C, uuid:3B5C08C9E72811DEBC0BD4B5DC224D7A, uuid:4B4206FEE73211DEBC0BD4B5DC224D7A, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:1D1227EFE7C511DE8D9BB27F0CE6DC58, uuid:E26E7505E71511DEBC0BD4B5DC224D7A, uuid:E26E7505E71511DEBC0BD4B5DC224D7A, uuid:E26E7505E71511DEBC0BD4B5DC224D7A, uuid:704729BEE25211DEB1C592445608063C, uuid:704729BEE25211DEB1C592445608063C, uuid:704729BEE25211DEB1C592445608063C, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:1D1227EFE7C511DE8D9BB27F0CE6DC58, uuid:704729BEE25211DEB1C592445608063C, uuid:704729BEE25211DEB1C592445608063C, uuid:704729BEE25211DEB1C592445608063C, uuid:704729BEE25211DEB1C592445608063C, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:8504050DBE3A11DD9BBE8D5264881CDE, uuid:8504050DBE3A11DD9BBE8D5264881CDE, uuid:8504050DBE3A11DD9BBE8D5264881CDE, uuid:8504050DBE3A11DD9BBE8D5264881CDE, uuid:8504050DBE3A11DD9BBE8D5264881CDE, uuid:DB0D1464E73911DEBC0BD4B5DC224D7A, uuid:DB0D1466E73911DEBC0BD4B5DC224D7A, uuid:251B425FE73E11DEBC0BD4B5DC224D7A, uuid:21155448E18E11DEB6E9F69928344725, uuid:2115543EE18E11DEB6E9F69928344725, uuid:6942E442E80211DE8D9BB27F0CE6DC58, uuid:55AE29D3E7FC11DE8D9BB27F0CE6DC58, uuid:DE370633E18D11DEB6E9F69928344725, uuid:DE370635E18D11DEB6E9F69928344725, uuid:21155440E18E11DEB6E9F69928344725, uuid:1D1227EFE7C511DE8D9BB27F0CE6DC58
Create Date                     : 2010:07:13 15:23:30+02:00
Modify Date                     : 2010:07:13 15:23:34+02:00
Metadata Date                   : 2010:07:13 15:23:34+02:00
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 12450 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : GB-5715110421-01.indd
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Page Count                      : 19
Creator                         : Adobe InDesign CS3 (5.0.4)

EXIF Metadata provided by EXIF.tools

Delonghi Gb 5715110421 Owner S Manual 01

Navigation menu

Versions of this User Manual:

Views

Navigation