Detex Product Catalog Detexcatalog
User Manual: Detex Detex Product Catalog Catalog
Open the PDF directly: View PDF 
.
Page Count: 334
| Download | |
| Open PDF In Browser | View PDF |
®
General Information
Advantex® Performance Specification
General
All exit devices shall be Advantex® 10 or 40 series
rim devices or 20/21 or 50/51 series surface vertical
rod devices as manufactured by Detex Corporation,
New Braunfels, TX, USA. Each exit device shall be
equipped and installed with a patented mounting
plate and strike locator for an accurate installation. All
wide and narrow stile devices shall be available with
matching outside trim and where required, available
with electrified options. All exit devices shall be
reversible or non-handed and all non-electrified exit
devices will be field sizeable.
Code Compliance
The exit devices shall be listed by Underwriters
Laboratories and bear the UL label for panic hardware
in compliance with NFPA 80 and 101. Where required,
all devices shall have a UL label for Fire Exit Devices
listed for use on fire rated doors up to and including
A label, three hours. UL labeled Fire Exit Devices
shall be listed for door opening sizes up to 8’0” x 10’0”
in standard pairs and in double egress pairs, with
Surface Vertical Rods and with Top Rod Only. Rim
mounted, UL labeled Fire Exit Devices shall be listed
for door openings sizes up to 4’0” x 10’0” on single
doors and 8’0” x 8’0” on door pairs with an F90KR
Keyed Removable Mullion.
All latch bolts shall be stainless steel material with a
deadlocking feature for increased security. Surface
vertical rod devices shall have pullman type top
deadlocking latch bolts. The bottom rod shall have a
solid steel deadlocking drop bolt. All surface vertical
rod devices shall be supplied standard with rod covers
and ADA-compliant bottom latch guards. All surface
vertical rods shall be available in a top rod only
configuration to meet all necessary code compliance
for panic and fire exit hardware.
Hex key dogging shall be a standard feature for all
non-fire rated exit devices. Optional features include
cylinder dogging or less dogging. All dogging will be
accomplished with no more than a one-eighth turn of
the hex key or cylinder key to minimize the risk of
repetitive motion injuries. Fire rated exit devices are
required to have less dogging.
The through-bolted modular design of all exit devices
shall accommodate a variety of different trims and
functions without altering the exit device. It shall not
be necessary to remove the device from the door
for keying changes or standard maintenance. All
standard stile outside lever trims shall be provided
with vandal-resistant clutching levers.
Options
Where required, all rim devices shall have a MiamiDade County, Florida label indicating hurricane
listing.
Optional slide in filler plates shall be available for all
exit devices to accommodate optional dogging types,
alarm and other electrified features.
All exit devices shall be certified to meet ANSI/BHMA
A156.3, Grade 1 requirements, and conform to ADA
and California Title 19 requirements.
Optional mounting plates will allow for retrofit over
other manufacturers’ mounting holes when doors are
not being replaced.
Design
Warranty
All exit devices shall be of super heavy duty design
and constructed of stainless steel covers and wraps
over a structurally engineered extruded aluminum
body. The end cap shall be constructed of 14 gauge
deep drawn stainless steel and designed with a
tapered angle of 50 degrees to deflect damage away
from the device. All end caps shall include the Quadlock structural design that incorporates 16 separate
bearing surfaces on four different planes, securely
interlocking the end cap to the exit device and door.
All exit devices shall be designed with internally
ribbed aluminum extrusion rails and base plate
mounted push pads to dissipate excessive force to
the push pad and prevent damage to the operating
mechanisms.
Detex Advantex panic hardware, when properly
installed, used and maintained, is warranted to be
free of defects in material and workmanship. We
will, for a period of ten (10) years from the date of
purchase, repair or replace any part which, upon our
examination, proves to be defective under normal
use. Electrical components, when properly installed,
used and maintained, are warranted to be free of
defects in material and workmanship for a period of
three (3) year. This warranty will be honored only
upon presentation of proof that the product covered
thereby was purchased directly from an authorized
Detex distributor. We shall not be liable for any direct,
incidental or consequential loss or damage arising
out of the failure of this panic hardware to operate.
®
General Information
Finishes
Detex is the first manufacturer of architectural exit devices to utilize the most sophisticated process of finishing on
stainless steel. Exclusive to Detex, the Physical Vapor Deposition (PVD) coating will not corrode, fade, chip or
discolor. It is more resistant to scratching than traditional finishes and all of these features make it ideal for your
very toughest locations.
Detex & BHMA Finish Numbers
Finish
Description
US Standard
605 - PVD Equivalent
606 - PVD Equivalent
611 - PVD Equivalent
612 - PVD Equivalent
613 - PVD Equivalent
625
626
629
630
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
Polished Chrome
Brushed Chrome
Polished Stainless Steel
Brushed Stainless Steel
US3
US4
US9
US10
US10B
US26
US26D
US32
US32D
All device finishes are over Stainless Steel.
Some outside trims are not available in stainless steel finish and will be provided in Brushed Chrome.
Split finishes, where the outside trim is different from the device, are available. List the outside trim finish first,
followed by the device finish.
How to Care for Finishes
Most PVD finished devices should be cleaned with a soft cloth and glass cleaner. Do not use any type of steel wool,
cleansing pad, scotch pad, foaming cleanser or any other type of cleansing product.
The 613 PVD finish has a coating that does not show fingerprints so cleaning should rarely be required. To restore
the warmth of the color use a mild furniture polish, preferable a paste to bring back the depth of the color.
Brushed Stainless Steel (630/US32D) should be kept away from contact with other metals. It should be cleaned
with a plastic pad or bronze wool. Avoid all solvents, bleach and steel wool.
Detex® Template Policy
Detex offers panic device template data on our website at www.detex.com. These templates are for reference
purposes. We recommend cutting doors for our panic devices using the patented mounting plate and strike locator
packed with each of our units. Using this mounting system to cut doors after they are hung yields a precise
installation based upon the exact door to frame, and door to mullion condition at each opening.
The on-site cutting of doors for our products is made simple and practical by the fact that our devices require only
simple through the door holes of standard drill bit sizes. This procedure actually reduces the installation time
otherwise required to apply shims and/or relocate pre-cut holes due to door and frame installation problems.
20
01
RHR
DOOR HANDING
RHR = Right hand reverse *
LHR = Left hand reverse
630
EAxKS
630
97
36”
84”
SLR
SN1
FASTENERS
SN1 = Sex Nuts
SSK1 = Security Screws
SN1xSSK1 = Sex Nuts &
Security Screws
EC1
ELECTRIC OPTIONS
KS = Key Stop (Available with
EA, EE, EExER, EI,
EM functions)
IN = 220-24VAC Transformer
(Available with EM function
only)
30 = 30 Second Delayed Egress
(Available with EE, EExER,
EM function only)
FC = End Cap with Flex Conduit
February 22, 2012
NOTE: * = default
(Outside Trim Finish - 626 is
default for Lever Trim and
630 is default for Pull Trim)
Contact factory for availability
of combined options
STRIKES
90 = Non-handed curved lip (30 Series)
91 = ANSI flat lip (30 Series)
92 = Double door short open back (30 Series)
93 = Double door long open back (30 Series)
ENDCAP
94 = Double door stike (10/40 Series)
EC1 = Ramped endcap*
95T = CVR, top strike (60/61/62/63/70/71/
EC2 = Flush endcap (standard on
80/81/82/83 Series)
all 628/693 and 695
95B = CVR, bottom strike (60/62/70/80/82 Series)
finishes)
96 = Surface (50/51 Series)
97 = Surface (20/21 Series)
98 = Semi-mortise (40 Series)
99 = Surface (10 Series)
DOOR WIDTH/DEVICE LENGTH
24” wide door
30” wide door
36” wide door (3’) *
48” wide door (4’)
C65
SLR = Silencer
DOOR HEIGHT/SVR HEIGHT
84” high door
96” high door
120” high door
DOOR HEIGHT/CVR HEIGHT
“__” - 80” - 96” high door
120” - 97” - 120” high door
Cylinders
C65 = Cylinder(s) 6pin/Keyed 5
IC7 = Cylinder(s) IC housing
IK7 = Cylinder(s) InstaKey housing
DEVICE FINISH
605 = Polished brass (PVD)
606 = Brushed brass (PVD)
611 = Polished bronze (PVD)
612 = Brushed bronze (PVD)
613 = Oil rubbed bronze (PVD)
628 = Aluminum paint/EC2
629 = Polished stainless steel
630 = Brushed stainless steel *
693 = Black powder coated / EC2
695 = Dark bronze powder coated / EC2
HOW TO ORDER
ELECTRIFIED FUNCTION
“__”
= No elec. option
EA
= Elec. Alarm
ED
= Elec. Dogging
EE
= Delayed Egress
EExER = Delayed Egress with
latch retraction
EI
= Elec. Integration
(10/40 Series only)
EM
= Egress w/Maglock elec.
delayed (10/40 Series only)
ER
= Elec. Latch Retraction
LX
= Latch Bolt Monitor
(Available with ER, EX,
EXV, EXxW, EXVxW)
ES
= Elec. Switching
(10/30/40 Series only)
EU
= Electric Unlock Trim (Fail Secure)
EX
= Request to Exit Signal
EXV
= Request to Exit Signal
high voltage
EXxW = Request to Exit Signal
Weatherized
EXVxW = Request to Exit Signal
high voltage Weatherized
LD
OUTSIDE TRIM FINISH
605 = Polished brass (PVD)
606 = Brushed brass (PVD)
611 = Polished bronze (PVD)
612 = Brushed bronze (PVD)
613 = Oil rubbed bronze (PVD)
625 = Polished chrome
626 = Brushed chrome *
629 = Polished stainless steel
630 = Brushed stainless steel *
693 = Black, powder coated
695 = Dark Bronze, powder coated
DOGGING FUNCTION
LD = Less dogging
HD = Hex dogging
CD = Cylinder dogging
OUTSIDE TRIM STYLE
C
= Wide pull / blank plate
(S handle)
CN = Narrow pull / blank plate
(S handle)
CV = CVR, wide pull / blank plate
CNV = CVR, narrow pull / blank plate
D
= Wide lever
(S, T or U lever)
DN = Narrow lever
(S, T or U lever)
DV = CVR, wide lever
(S, T or U lever)
DNV = CVR, narrow lever
(S, T or U lever)
EU = Electric Lock / Unlock
(consult Factory)
R
= CVR, cylinder escutcheon
W = Wide plate - long
WS = Plate - short
WSV = CVR, cylinder plate - short
WP = Wire pull
Z
= Vandal pull
CAK = CVR Cylinder anchor kit, 03,
no pull
CBK = Cylinder bracket kit, 03, no pull
C
OUTSIDE TRIM FUNCTION
01 = No trim or blank plate
02 = Dummy trim / Inactive Trim
03 = Key retracts latch
08 = Active lever
key locks / unlocks lever
09 = Lever trim active by key;
locked when key removed
10 = Double cylinder
(10 and 30 Series only)
14 = Active lever no key cylinder
EU = Electric Unlock Trim
(Fail Safe / Fail Secure)
EU2W = Electric Unlock Trim BP2 Mounting Plate
(Fail Safe / Fail Secure)
SERIES TYPE
10
= Rim device, wide stile
10xW = Weatherized Rim device,
wide stile
H10 = Rim device, wide stile,
hurricane rated
20
= SVR, wide stile
20xW = Weatherized SVR, wide stile
21
= SVR, top rod only, wide stile
30
= Mortise lock exit device
40
= Rim device, narrow stile
H40 = Rim device, narrow stile,
hurricane rated
50
= SVR, narrow stile
51
= SVR, top rod only, narrow
stile
60
= CVR/EC2, narrow stile,
aluminum door
61
= CVR/EC2, top rod only,
narrow stile, aluminum door
62
= CVR, narrow stile, hollow
metal door
63
= CVR, top rod only, narrow
stile, hollow metal door
70
= CVR, wide stile, wood door
71
= CVR, top rod only, wide
stile, wood door
80
= CVR, wide stile, hollow
metal door
81
= CVR, top rod only, wide
stile, hollow metal door
82
= CVR, wide stile, aluminum
door
83
= CVR, top rod only, wide
stile, aluminum door
Example Order
Number
F
RATING
“H” = Hurricane
(see below)
“F” = Fire rated
“__” = Non-fire
rated *
®
®
Rim Exit Devices
Exit Device Types
10 Series - Wide Stile Rim Device
10xW Series - Weatherized Wide Stile Rim Device
20 Series - Wide Stile Surface Vertical Rod
20xW Series - Weatherized Wide Stile Surface Vertical Rod
21 Series - Wide Stile Surface Vertical Rod - Top Rod Only
30 Series - Mortise Lock Exit Device
40 Series - Narrow Stile Rim Device
50 Series - Narrow Stile Surface Vertical Rod
51 Series - Narrow Stile Surface Vertical Rod - Top Rod Only
60 Series - Narrow Stile Concealed Vertical Rod for Aluminum Doors
61 Series - Narrow Stile Concealed Vertical Rod for Aluminum Doors - Top Rod Only
62 Series - Narrow Stile Concealed Vertical Rod for Hollow Metal Doors
63 Series - Narrow Stile Concealed Vertical Rod for Hollow Metal Doors - Top Rod Only
70 Series - Wide Stile Concealed Vertical Rod for Wood Doors
71 Series - Wide Stile Concealed Vertical Rod for Wood Doors - Top Rod Only
80 Series - Wide Stile Concealed Vertical Rod for Hollow Metal Doors
81 Series - Wide Stile Concealed Vertical Rod for Hollow Metal Doors - Top Rod Only
82 Series - Wide Stile Concealed Vertical Rod for Aluminum Doors
83 Series - Wide Stile Concealed Vertical Rod for Aluminum Doors - Top Rod Only
®
10 SERIES
Rim Exit Device
The 10 Series rim exit device is super-heavy-duty panic and fire exit hardware for use on all types of single and
double doors with mullions. The patented mounting plate and strike locator system ensures the easiest and most
accurate installation of panic hardware available.
ANSI 156.3 - 2008
Grade 1
Type 1
Benefits
• Tough and durable design for
years of trouble-free service
in high-use, high-abuse
environments
• Fast and accurate installation
• Minimal door prep saves time and
money
• Outside trims are easily changed
or re-keyed without removing
device from door
Features
• Patented mounting plate and
strike locator system replaces
paper templates
• Tested beyond 1,000,000 cycles Twice the cycling required for
Grade 1 UL testing
• Heavy-duty angled end-cap
deflects damage away from device
• Stainless steel deadlocking,
Pullman-type latch bolt
• All exposed surfaces are finished
over stainless steel with PVD, an
environmentally-friendly finishing
process
• Field sizeable
• Non-handed
• 1/8 turn hex or cylinder dogging
Mechanical Options
• F - 3-Hour Fire Rated
• SLR - Silencer
• 99 - Surface Strike (Std.)
• CD - Cylinder Dogging
• 98 - Semi Mortise Strike
• HD - Hex Dogging (Std.)
• 36 - Fits 36" Door Width (Std.)
• LD - Less Dogging
• 48 - Fits 48" Door Width
• Exit Alarm (EA)
• Electric Unlock (EU)
• Electric Dogging (ED)
• Latch Bolt Signaling (LX)
• Request to Exit Weatherized
(EXxW)
• H - Hurricane Rated
• BP-3 Mounting plate (call factory
for retrofit information)
• BP-5 Mounting Plate (call factory
for retrofit information)
Electrical Options
• Electric Integration (EI)
• Electric Latch Retraction (ER)
• Latch Bolt Signaling for High
Voltage (LXV)
• Delayed Egress - Self Contained
(EE)
• Electric Switching (ES)
• Delayed Egress with Latch
Retraction (EExER)
• Delayed Egress - Mag Lock
(EM)
• Request to Exit (EX)
• Request to Exit for High Voltage
(EXV)
• Request to Exit Weatherized for
High Voltage (EXVxW)
Refer to Electrified Options section for
more information
Accessories
• GB1 - Glass Bead Kit
• SSK - Security Torx Screw Kit
• SN1 - Sex Nut Kit (2 per package)
• Trim Functions (see Outside Trims)
• Electrified Options (see Electrified
Options)
Technical Information
• Door Types - Wood, Hollow Metal,
Fiberglass or Aluminum
• Door Thickness - Fits standard
1-3/4" - 2-1/4" doors (for other
door thicknesses contact factory)
• Minimum Stile - 4-5/8" with
standard 99 strike; 4-1/8" with
optional 98 strike
• Fasteners - Machine and SelfDrilling Screws standard
628 / US28
629 / US32
693 / SPBLK Black, Painted
695 / SP 313 Dark Bronze, Painted
Finishes
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Aluminum Satin
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
Single Door
Listings and Approvals
UL Listed
Panic Hardware
4 5/8”
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable
Mullion
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
18”
Meets NFPA 80 & 101
24”
for Life Safety
33 1/2”
45 1/2”
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval
FL9052
Double Door with 90KR Mullion
California State Fire Marshall 4140-0127:105 and
3725-0127:108
5-1/16”
Detex Limited Warranty
Door
Device
10 Year Mechanical/3 year Electrical
Limited Manufacturers Warranty
Door
90KR
Mullion
Device
Dimensions
* 18” and 32 1/2”
dimension for 36” door
* 24” and 44 1/2”
dimension for 48” door
November 1, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
10xW SERIES
Weatherized Rim Exit Device
The 10xW Series weatherized rim exit device is super-heavy-duty panic and fire exit hardware for use on all
types of single doors and gates and double doors and gates with mullions that are or may be exposed directly
to the weather. The patented mounting plate and strike locator system ensures the easiest and most accurate
installation of panic hardware available. In addition to listing as UL panic and fire exit hardware device, this
device conforms to UL1034-34 Temperature Section 34, UL1034-54 Dust Section 54, MIL-STD 810F, Method
506.4 (driving rain test); MIL-STD 810F, Method 509.4 (salt fog test) and UBC standard 7-2 (positive pressure).
ANSI 156.3 - 2008
Grade 1
Type 1
Benefits
• Tough and durable design for
years of trouble-free service in
high-use, high-abuse or inclement
weather environments
• Fast and accurate installation
• Minimal door prep saves time and
money
• Outside trims are easily changed
or re-keyed without removing
device from door
Features
• Patented mounting plate and
strike locator system replaces
paper templates
• Tested beyond 1,000,000 cycles Twice the cycling required for
Grade 1 UL testing
• Heavy-duty angled end-cap
deflects damage away from device
• Stainless steel deadlocking,
Pullman-type latch bolt
• All exposed surfaces are finished
over stainless steel with PVD, an
environmentally-friendly finishing
process
• Field sizeable
• Non-handed
• 1/8 turn hex or cylinder dogging
Mechanical Options
• F - 3-Hour Fire Rated
• H - Hurricane Rated
• BP-3 Mounting plate (call factory
for retrofit information)
• CD - Cylinder Dogging
• 99 - Surface Strike (Std.)
• HD - Hex Dogging (Std.)
• 98 - Semi Mortise Strike
• LD - Less Dogging
• 36 - Fits 36" Door Width (Std.)
• BP-5 Mounting Plate (call factory
for retrofit information)
• 48 - Fits 48" Door Width
Electrical Options
• Electric Unlock (EU)
• Request to Exit Weatherized
(EXxW)
• Request to Exit Weatherized for
High Voltage (EXVxW)
Refer to Electrified Options section for
more information
Accessories
• GB1 - Glass Bead Kit
• SSK - Security Torx Screw Kit
• GTPLV40 - Adjustable Gate Plate
• SN1 - Sex Nut Kit (2 per package)
• Trim Functions (see Outside Trims)
• Electrified Options (see Electrified
Options)
Technical Information
• Door Types - Wood, Hollow Metal,
Fiberglass or Aluminum
• Fasteners - Machine and SelfDrilling Screws standard
• Door Thickness - Fits standard
1-3/4" - 2-1/4" doors (for other
door thicknesses contact factory)
• Recommended Plate Size
• Minimum Stile - 4-5/8” with
standard 99 strike; 4-1/8” with
optional 98 strike
Gate - 1/8” thick plate, galvanized,
or painted steel or 1/4” thick alumnum plate, minimum Height - 10”
Strike - 1/8” thick plated, galvanized, painted steel plate, angle
iron, or 1/4” thick aluminum plate,
minimum Height - 5”
Stop - 1/8 thick plated, galvanized,
or painted angle iron or 1/4” thick
aluminum angle plate, minimum
Height - 2”
Finishes
605 / US3
606 / US4
611 / US9
Polished Brass
Brushed Brass
Polished Bronze
612 / US10
613 / US10B
628 / US28
629 / US32
Brushed Bronze
Oil Rubbed Bronze
Aluminum Satin
Polished Stainless
Steel
Single Gate
630 / US32D Brushed Stainless
Steel
693 / SPBLK Black, Painted
695 / SP 313 Dark Bronze, Painted
Dimensions
Overhead View
Gate Stop
(see Technical
Information
above)
Weld recommended,
machine or sheetmetal
screw mounting allowable.
Plate for mounting
panic device See Technical
Infomation above
* 18” and 32 1/2” dimension for 36” door
* 24” and 44 1/2”dimension for 48” door
3/4" Max.
Plate for mounting
strike - See
Technical
Information above
Detex Limited Warranty
10 Year Mechanical/3 year Electrical
Limited Manufacturers Warranty
Listings and Approvals
LISTED
LISTED
UL Listed
Panic Hardware
ANSI/BHMA certified A156.3
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable
Mullion
Meets NFPA 80 & 101
UL1034 - 34 Temperature Section 34
[Temperature Range -31° F (-35° C) to
150° F (+66° C)]
UL1034 - 54 Dust Section 54
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
November 1, 2012
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval
FL9052
California State Fire Marshall 4140-0127:105 and
3725-0127:108
MIL-STD 810F (G), Method 509.4
(Salt Fog Test)
MIL-STD 810F (G), Method 506.4
(Driving Rain), Procedure 1
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
20 SERIES
Surface Vertical Rod Device
The 20 Series surface vertical rod exit device is
super-heavy-duty panic and fire exit hardware for
use on all types of double doors without a mullion.
All 20 series SVR exit devices are supplied with
top and bottom rod covers and an ADA compliant
ramped bottom bolt cover. The patented mounting
plate and strike locator system ensures the easiest
and most accurate installation of panic hardware
available.
ANSI 156.3 - 2008
Grade 1
Type 2
Benefits
• Tough and durable design for
years of trouble-free service in
high-use, high-abuse
environments
• Fast and accurate installation
• Minimal door prep saves time and
money
• Security enhanced by stainless
steel rod covers, standard
• Outside trims are easily changed
or rekeyed without removing
device from door
Features
• Patented mounting plate and
strike locator system replaces
paper templates
• ADA ramped bottom bolt cover
• Stainless steel deadlocking,
Pullman-type top latch
• All exposed surfaces are finished
over stainless steel with PVD, an
environmentally friendly finishing
process
• Hardened steel bottom drop bolt
with dust proof strike
• 1/8 turn hex or cylinder dogging
• Heavy-duty angled end-cap
deflects damage away from device
• Handed - field reversible
• Field sizeable
Mechanical Options
• F - 3-Hour Fire Rated
• LD - Less Dogging
• 84 - 84" Door Height (Std.)
• HD - Hex Dogging (Std.)
• 36 - Fits 36" Door Widths (Std.)
• 96 - 85" to 96" Door Height
• CD - Cylinder Dogging
• 48 - Fits 48" Door Widths
• 120 - 97" to 120" Door Height
• Exit Alarm (EA)
• Electric Unlock (EU)
• Electric Dogging (ED)
• Request to Exit (EX)
Refer to Electrified Options section for
more information
Electrical Options
• Electric Integration (EI)
• Electric Latch Retraction (ER)
• Request to Exit for High Voltage
(EXV)
• Delayed Egress - Self Contained
(EE)
• Request to Exit Weatherized
(EXxW)
• Delayed Egress with Latch
Retraction (EExER)
• Request to Exit Weatherized for
High Voltage (EXVxW)
Accessories
• GB3 - Glass Bead Kit - 7' Door
Height (84")
• GB11 - Glass Bead Kit - 10'
Door Height (97" - 120")
• SSK- Security Torx Screw Kit
• GB7 - Glass Bead Kit - 8'
Door Height (85" - 96")
• SN1 - Sex Nut Kit (2 per package)
• Electrified Options (see Electrified
Options)
• Trim Functions (see Outside Trims)
Technical Information
• Door Types - Wood, Hollow Metal,
Fiberglass or Aluminum
• Minimum Stile - 4-1/2" with
standard 97 strike
• Fasteners - Machine and SelfDrilling Screws standard
628 / US28
629 / US32
693 / SPBLK Black, Painted
695 / SP 313 Dark Bronze, Painted
• Door Thickness - Fits standard
1-3/4" - 2-1/4" doors (for other
door thicknesses contact factory)
Finishes
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
Aluminum Satin
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Dimensions
Top
Bottom
18” / 24” *
* 18” and 32 1/2”
dimension for 36” door
* 24” and 44 1/2”
dimension for 48” door
32 1/2” / 44 1/2” *
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
Detex Limited Warranty
10 Year Mechanical/3 year Electrical
Limited Manufacturers Warranty
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
8'x10' pairs of doors
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
California State Fire Marshall 4140-0127:105 and
3725-0127:108
November 1, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
20 x W SERIES
Weatherized Surface Vertical Rod Device
The 20 x W Series surface vertical rod exit
device is super-heavy-duty panic and fire exit
hardware for use on all types of double doors or
gates without a mullion that are or may be exposed
directly to the weather. All 20 series SVR exit
devices are supplied with top and bottom rod
covers and an ADA compliant ramped bottom bolt
cover. The patented mounting plate and strike
locator system ensures the easiest and most
accurate installation of panic hardware available.
In addition to listing as UL panic and fire exit
hardware device, this device conforms to
UL1034-34 Temperature Section 34, UL1034-54
Dust Section 54, MIL-STD 810F, Method 506.4
(driving rain test); MIL-STD 810F, Method 509.4
(salt fog test) and UBC standard 7-2 (positive
pressure).
ANSI 156.3 - 2008
Grade 1
Type 2
Benefits
• Tough and durable design for
years of trouble-free service in
high-use, high-abuse or inclement
weather environments
• Fast and accurate installation
• Minimal door prep saves time and
money
• Security enhanced by stainless
steel rod covers, standard
• Outside trims are easily changed
or rekeyed without removing
device from door
Features
• Patented mounting plate and
strike locator system replaces
paper templates
• ADA ramped bottom bolt cover
• Stainless steel deadlocking,
Pullman-type top latch
• All exposed surfaces are finished
over stainless steel with PVD, an
environmentally friendly finishing
process
• Hardened steel bottom drop bolt
with dust proof strike
• 1/8 turn hex or cylinder dogging
• Heavy-duty angled end-cap
deflects damage away from device
• Handed - field reversible
• Field sizeable
Mechanical Options
• F - 3-Hour Fire Rated
• LD - Less Dogging
• 84 - 84" Door Height (Std.)
• HD - Hex Dogging (Std.)
• 36 - Fits 36" Door Widths (Std.)
• 96 - 85" to 96" Door Height
• CD - Cylinder Dogging
• 48 - Fits 48" Door Widths
• 120 - 97" to 120" Door Height
• Request to Exit Weatherized for
High Voltage (EXVxW)
Refer to Electrified Options section for
more information
Electrical Options
• Electric Unlock (EU)
• Request to Exit Weatherized
(EXxW)
Accessories
• GB3 - Glass Bead Kit - 7' Door
Height (84")
• GB11 - Glass Bead Kit - 10'
Door Height (97" - 120")
• GB7 - Glass Bead Kit - 8'
Door Height (85" - 96")
• SN1 - Sex Nut Kit (2 per package)
Accessories Cont’d
• SSK- Security Torx Screw Kit
Technical Information
• Trim Functions (see Outside Trims)
• GTPLV40 - Adjustable Gate Plate
• Door Types - Wood, Hollow Metal,
Fiberglass or Aluminum
• Fasteners - Machine and SelfDrilling Screws standard
• Door Thickness - Fits standard
1-3/4" - 2-1/4" doors (for other
door thicknesses contact factory)
• Recommended Plate Size
• Minimum Stile - 4-1/2” with
standard 97 strike
Finishes
605 / US3
606 / US4
611 / US9
612 / US10
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Strike - 1/8” thick plated, galvanized, painted steel plate, angle
iron, or 1/4” thick aluminum plate,
minimum Height - 5”
Gate - 1/8” thick plate, galvanized,
or painted steel or 1/4” thick alumnum plate, minimum Height - 10”
Stop - 1/8 thick plated, galvanized,
or painted angle iron or 1/4” thick
aluminum angle plate, minimum
Height - 2”
630 / US32D Brushed Stainless
Steel
693 / SPBLK Black, Painted
695 / SP 313 Dark Bronze, Painted
613 / US10B Oil Rubbed Bronze
628 / US28
Aluminum Satin
629 / US32 Polished Stainless
Steel
Double Gate Riser
• Electrified Options (see Electrified
Options)
Dimensions
Top
Bottom
18” / 24” *
DETEX PANIC
HARDWARE
WITH WEATHERIZED
PUSHPAD SWITCHING
(TYPICAL EACH GATE LEAF)
32 1/2” / 44 1/2” *
* 18” and 32 1/2” dimension for 36” door
* 24” and 44 1/2” dimension for 48” door
MOUNTING PLATE
FOR PANIC HARDWARE
Detex Limited Warranty
10 Year Mechanical/3 year Electrical
Limited Manufacturers Warranty
Listings and Approvals
LISTED
LISTED
UL Listed
Panic Hardware
UBC 97, Standard 7-2 and
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
Meets NFPA 80 & 101
UL10C for positive pressure
for Life Safety
8'x10' pairs of doors
UL1034 - 33Temperature
Temperature Section
Section 33
UL1034-34
34
[Temperature Range -31° F (-35° C) to
150° F (+66° C)]
UL1034 - 53Temperature
Dust SectionSection
53
UL1054-54
54
Meets ADA requirements
ANSI/BHMA certified A156.3
November 1, 2012
California State Fire Marshall 4140-0127:105 and
3725-0127:108
MIL-STD 810F (G), Method 509.4
(Salt Fog Test)
MIL-STD 810F (G), Method 506.4
(Driving Rain), Procedure 1
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
21 SERIES
Surface Vertical Top Rod Only Device
The 21 Series surface vertical rod exit device is
super-heavy-duty panic and fire exit hardware for
use on all types of double doors without a mullion.
All 21 Series Top Rod Only exit devices are supplied
with rod cover. The patented mounting plate and
strike locator system ensures the easiest and most
accurate installation of panic hardware available.
ANSI 156.3 - 2008
Grade 1
Type 2
Benefits
• Tough and durable design for
years of trouble-free service in
high-use, high-abuse
environments
• Fast and accurate installation
• Minimal door prep saves time and
money
• Security enhanced by stainless
steel rod covers, standard
• Outside trims are easily changed
or rekeyed without removing
device from door
Features
• Patented mounting plate and
strike locator system replaces
paper templates
• Stainless steel deadlocking,
Pullman-type top latch
• 1/8 turn hex or cylinder dogging
• All exposed surfaces are finished
over stainless steel with PVD, an
environmentally friendly finishing
process
• Heavy-duty angled end-cap
deflects damage away from device
• Handed - field reversible
• Field sizeable
Mechanical Options
• F - 3-Hour Fire Rated
• LD - Less Dogging
• 84 - 84" Door Height (Std.)
• HD - Hex Dogging (Std.)
• 36 - 36" Door Widths (Std.)
• 96 - 85" to 96" Door Height
• CD - Cylinder Dogging
• 48 - 48" Door Widths
• 120 - 97" to 120" Door Height
Electrical Options
• Exit Alarm (EA)
• Electric Unlock (EU)
• Electric Dogging (ED)
• Request to Exit (EX)
Refer to Electrified Options section for
more information
• Electric Integration (EI)
• Electric Latch Retraction (ER)
• Request to Exit for High Voltage
(EXV)
• Delayed Egress - Self Contained
(EE)
• Request to Exit Weatherized
(EXxW)
• Delayed Egress with Latch
Retraction (EExER)
• Request to Exit Weatherized for
High Voltage (EXVxW)
Accessories
• GB4 - Glass Bead Kit - 7' Door
Height (84")
• GB12 - Glass Bead Kit - 10'
Door Height (97" - 120")
• SSK- Security Torx Screw Kit
• GB8 - Glass Bead Kit - 8'
Door Height (85" - 96")
• SN1 - Sex Nut Kit (2 per package)
• Electrified Options (see Electrified
Options)
• Trim Functions (see Outside Trims)
Technical Information
• Door Types - Wood, Hollow Metal,
Fiberglass or Aluminum
• Minimum Stile - 4-1/2" with
standard 97 strike
• Fasteners - Machine and SelfDrilling Screws standard
628 / US28
629 / US32
693 / SPBLK Black, Painted
695 / SP 313 Dark Bronze, Painted
• Door Thickness - Fits standard
1-3/4" - 2-1/4" doors (for other
door thicknesses contact factory)
Finishes
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
Aluminum Satin
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Dimensions
18” / 24” *
* 18” and 32 1/2”
dimension for 36” door
* 24” and 44 1/2”
dimension for 48” door
32 1/2” / 44 1/2” *
Popper Detail for
Fire Rated Device
Listings and Approvals
UL Listed
Panic Hardware
Retaining Clip
Popper
LISTED
Plug
12”
12”
Door
LISTED
Detex Limited Warranty
10 Year Mechanical/3 year Electrical
Limited Manufacturer's Warranty
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
8'x10' pairs of doors
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
California State Fire Marshall 4140-0127:105 and
3725-0127:108
November 1, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
30 SERIES
Mortise Lock Exit Device
The 30 Series mortise lock exit device is super-heavy-duty panic and fire exit hardware for use on all types of
single and double doors. The patented mounting plate and strike locator system ensures the easiest and most
accurate installation of panic hardware available.
ANSI 156.3 - 2008
Grade 1
Type 3
Benefits
• Tough and durable design for
years of trouble-free service
in high-use, high-abuse
environments
• Fast and accurate installation
• Minimal door prep saves time and
money
• Easy retrofit to other manufacturers
• Outside trims are easily changed
or re-keyed without removing
device from door
Features
• 3/4" Projection Stainless Steel
latch bolt
• All exposed surfaces are finished
over stainless steel with PVD, an
environmentally-friendly finishing
process
• 1/8 turn dogging
• Non-handed, field sizeable
• Heavy-duty angled end-cap
deflects damage away from device
• CD - Cylinder Dogging
• 90 ANSI Strike (Std.)
• HD - Hex Dogging (Std.)
• 91 ANSI Flat Lip Strike
• 93 - Double Door Long Open
Back Strike
• LD - Less Dogging
• 92 Double Door Short Open
Back Strike
• Anti-friction, deadlocking,
latch bolt
• Patented mounting plate and
strike locator system
Mechanical Options
• F - 3-Hour Fire Rated
• 36 - Fits 36" Door Width (Std.)
• 48 - Fits 48" Door Width
Electrical Options
• Exit Alarm (EA)
• Request to Exit (EX)
• Electric Dogging (ED)
• Request to Exit for High Voltage
(EXV)
• Electric Latch Retraction (ER)
• Delayed Egress Self-Contained
(EE)
• Delayed Egress with Latch
Retraction (EExER)
• Request to Exit Weatherized
(EXxW)
• Request to Exit Weatherized for
High Voltage (EXVxW)
Refer to Electrified Options section for
more information
Accessories
• SN1 - Sex Nut Kit (2 per package)
Technical Information
• Door Types - Wood, Hollow Metal,
Fiberglass or Aluminum
• GB16 - Glass Bead Kit
• Minimum Stile - 4-3/4"
• Optional Sex Nuts for wood or
composite doors
• Machine and Self-Drilling Screws
(Std.)
• Door Thickness - Fits standard
1-3/4" - 2-1/4" doors (for other
door thicknesses contact factory)
Finishes
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
• KS - Key Stop - key removed only
when armed
628 / US28
629 / US32
Aluminum Satin
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
Single Door
• Security Torx screws available
693 / SPBLK Black, Painted
695 / SP 313 Dark Bronze, Painted
Listings and Approvals
4 1/2”
UL Listed
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
8'x10' doors with Surface Vertical Rod
Meets ADA requirements
UBC 97, Standard 7-2 and
18”
24”
UL10C for positive pressure
33 1/2”
45 1/2”
Double Door with Mortise and Vertical Rod
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
Door
Device
California State Fire Marshall 4140-0127:105 and
3725-0127:108
Door
Detex Limited Warranty
10 Year Mechanical/3 year Electrical
Limited Manufacturer's Warranty
Device
Dimensions
* 18” and 32 1/2”
dimension for 36” door
* 24” and 44 1/2”
dimension for 48” door
October 18, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
40 SERIES
Narrow Stile Rim Exit Device
The 40 Series rim exit device is super-heavy-duty panic and fire exit hardware for use on all types of narrow
stile single and double doors with mullions. The patented mounting plate and strike locator system ensures the
easiest and most accurate installation of panic hardware available.
ANSI 156.3 - 2008
Grade 1
Type 4
Benefits
• Tough and durable design for
years of trouble-free service
in high-use, high-abuse
environments
• Fast and accurate installation
• Minimal door prep saves time and
money
• Outside trims are easily changed
or re-keyed without removing
device from door
Features
• Patented mounting plate and
strike locator system replaces
paper templates
• Stainless steel deadlocking,
Pullman-type latch bolt
• All exposed surfaces are finished
over stainless steel with PVD, an
environmentally-friendly finishing
process
• Non-handed
• Field sizeable
• 1/8 turn hex or cylinder dogging
• Heavy-duty angled end-cap
deflects damage away from device
Mechanical Options
• F - 3-Hour Fire Rated
• CD - Cylinder Dogging
• 99 - Surface Strike
• H - Hurricane Rated
• LD - Less Dogging
• 36 - Fits 36" Door Width (Std.)
• HD - Hex Dogging (Std.)
• 98 - Semi Mortise Strike (Std.)
• 48 - Fits 48" Door Width
• Exit Alarm (EA)
• Electric Unlock (EU2W)
• Electric Dogging (ED)
• Latch Bolt Signaling (LX)
• Request to Exit Weatherized
(EXxW)
Electrical Options
• Electric Integration (EI)
• Electric Latch Retraction (ER)
• Latch Bolt Signaling for High
Voltage (LXV)
• Delayed Egress - Self Contained
(EE)
• Electric Switching (ES)
• Delayed Egress with Latch
Retraction (EExER)
• Delayed Egress - Mag Lock
(EM)
• Request to Exit (EX)
• Request to Exit for High Voltage
(EXV)
• Request to Exit Weatherized for
High Voltage (EXVxW)
Refer to Electrified Options section for
more information
Accessories
• GB2 - Glass Bead Kit
• SSK - Security Torx Screw Kit
• SN1 - Sex Nut Kit (2 per package)
• Trim Functions (see Outside Trims)
• Electrified Options (see Electrified
Options)
Technical Information
• Door Types - Wood, Hollow Metal,
Fiberglass or Aluminum
• Door Thickness - Fits standard
1-3/4" - 2-1/4" doors (for other
door thicknesses contact factory)
• Minimum Stile - 2" with standard
98 strike; 2-1/2" with optional 99
strike
• Fasteners - Machine and SelfDrilling Screws standard
628 / US28
629 / US32
693 / SPBLK Black, Painted
695 / SP 313 Dark Bronze, Painted
Finishes
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
Aluminum Satin
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Single Door
2”
Listings and Approvals
UL Listed
Panic Hardware
>
>
LISTED
Door
Door
LISTED
Device
2 3/8”
Device
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable
Mullion
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
18”
24”
ANSI/BHMA certified A156.3
35 1/2”
47 1/2”
for Life Safety
>
>
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
>
>
Double Door with
90KR Mullion
State of Florida Approval
FL9052
California State Fire Marshall 4140-0127:105 and
3725-0127:108
2-7/16”
Door
Device
Meets NFPA 80 & 101
Detex Limited Warranty
Door
90KR
Mullion
10 Year Mechanical/3 year Electrical
Limited Manufacturer's Warranty
Device
Dimensions
18” / 24” *
* 18” and 34 1/8”
dimension for 36” door
* 24” and 46 1/8”
dimension for 48” door
34 1/8” / 46 1/8” *
October 18, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
50 SERIES
Narrow Stile Surface Vertical Rod Device
The 50 Series surface vertical rod exit device
is super-heavy-duty panic and fire exit hardware
for use on all types of narrow stile double doors
without a mullion. All 50 series SVR exit devices
are supplied with top and bottom rod covers and
an ADA compliant ramped bottom bolt cover. The
patented mounting plate and strike locator system
ensures the easiest and most accurate installation
of panic hardware available.
ANSI 156.3 - 2008
Grade 1
Type 5
Benefits
• Tough and durable design for
years of trouble-free service
in high-use, high-abuse
environments
• Fast and accurate installation
• Minimal door prep saves time and
money
• Security enhanced by stainless
steel rod covers, standard
• Outside trims are easily changed
or rekeyed without removing
device from door
Features
• Patented mounting plate and
strike locator system replaces
paper templates
• ADA ramped bottom bolt cover
• Stainless steel deadlocking,
Pullman-type top latch
• All exposed surfaces are finished
over stainless steel with PVD, an
environmentally friendly finishing
process
• Hardened steel bottom drop bolt
with dust proof strike
• 1/8 turn hex or cylinder dogging
• Heavy-duty angled end-cap
deflects damage away from device
• Handed - field reversible
• Field sizeable
Mechanical Options
• F - 3-Hour Fire Rated
• LD - Less Dogging
• 84 - 84" Door Height (Std.)
• HD - Hex Dogging (Std.)
• 36 - 36" Door Widths (Std.)
• 96 - 85" to 96" Door Height
• CD - Cylinder Dogging
• 48 - 48" Door Widths
• 120 - 97" to 120" Door Height
• Exit Alarm (EA)
• Electric Unlock (EU2W)
• Electric Dogging (ED)
• Request to Exit (EX)
Refer to Electrified Options section for
more information
Electrical Options
• Electric Integration (EI)
• Electric Latch Retraction (ER)
• Request to Exit for High Voltage
(EXV)
• Delayed Egress - Self Contained
(EE)
• Request to Exit Weatherized
(EXxW)
• Delayed Egress with Latch
Retraction (EExER)
• Request to Exit Weatherized for
High Voltage (EXVxW)
Accessories
• GB5 - Glass Bead Kit - 7'
Door Height (84")
• GB13 - Glass Bead Kit - 10'
Door Height (97" - 120")
• SSK- Security Torx Screw Kit
• GB9 - Glass Bead Kit - 8'
Door Height (85" - 96")
• SN1 - Sex Nut Kit (2 per package)
• Electrified Options (see Electrified
Options)
• Trim Functions (see Outside Trims)
Technical Information
• Door Types - Wood, Hollow Metal,
Fiberglass or Aluminum
• Minimum Stile - 2" with
standard 96 strike
• Fasteners - Machine and SelfDrilling Screws standard
628 / US28
629 / US32
693 / SPBLK Black, Painted
695 / SP 313 Dark Bronze, Painted
• Door Thickness - Fits standard
1-3/4" - 2-1/4" doors (for other
door thicknesses contact factory)
Finishes
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
Aluminum Satin
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Dimensions
Top
Bottom
18” / 24” *
* 18” and 34 1/8”
dimension for 36” door
* 24” and 46 1/8”
dimension for 48” door
34 1/8” / 46 1/8” *
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
Detex Limited Warranty
10 Year Mechanical/3 year Electrical
Limited Manufacturer's Warranty
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
8'x10' pairs of doors
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
California State Fire Marshall 4140-0127:105 and
3725-0127:108
November 1, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
51 SERIES
Narrow Stile Surface Vertical Top Rod Only Device
The 51 Series surface vertical rod exit device is
super-heavy-duty panic and fire exit hardware for
use on all types of narrow stile double doors without a
mullion. All 51 Series Top Rod Only exit devices are
supplied with a rod cover. The patented mounting plate
and strike locator system ensures the easiest and most
accurate installation of panic hardware available.
ANSI 156.3 - 2008
Grade 1
Type 5
Benefits
• Tough and durable design for
years of trouble-free service in
high-use, high-abuse
environments
• Fast and accurate installation
• Minimal door prep saves time and
money
• Security enhanced by stainless
steel rod covers, standard
• Outside trims are easily changed
or rekeyed without removing
device from door
Features
• Patented mounting plate and
strike locator system replaces
paper templates
• Stainless steel deadlocking,
Pullman-type top latch
• 1/8 turn hex or cylinder dogging
• All exposed surfaces are finished
over stainless steel with PVD, an
environmentally friendly finishing
process
• Heavy-duty angled end-cap
deflects damage away from device
• Handed - field reversible
• Field sizeable
Mechanical Options
• F - 3-Hour Fire Rated
• LD - Less Dogging
• 84 - 84" Door Height (Std.)
• HD - Hex Dogging (Std.)
• 36 - 36" Door Widths (Std.)
• 96 - 85" to 96" Door Height
• CD - Cylinder Dogging
• 48 - 48" Door Widths
• 120 - 97" to 120" Door Height
• Exit Alarm (EA)
• Electric Unlock (EU)
• Electric Dogging (ED)
• Request to Exit (EX)
Refer to Electrified Options section for
more information
Electrical Options
• Electric Integration (EI)
• Electric Latch Retraction (ER)
• Request to Exit for High Voltage
(EXV)
• Delayed Egress - Self Contained
(EE)
• Request to Exit Weatherized
(EXxW)
• Delayed Egress with Latch
Retraction (EExER)
• Request to Exit Weatherized for
High Voltage (EXVxW)
Accessories
• GB6 - Glass Bead Kit - 7' Door
Height (84")
• GB14 - Glass Bead Kit - 10'
Door Height (97" - 120")
• SSK- Security Torx Screw Kit
• GB10 - Glass Bead Kit - 8'
Door Height (85" - 96")
• SN1 - Sex Nut Kit (2 per package)
• Electrified Options (see Electrified
Options)
• Trim Functions (see Outside Trims)
Technical Information
• Door Types - Wood, Hollow Metal,
Fiberglass or Aluminum
• Minimum Stile - 2" with
standard 96 strike
• Fasteners - Machine and SelfDrilling Screws standard
628 / US28
629 / US32
693 / SPBLK Black, Painted
695 / SP 313 Dark Bronze, Painted
• Door Thickness - Fits standard
1-3/4" - 2-1/4" doors (for other
door thicknesses contact factory)
Finishes
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
Aluminum Satin
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Dimensions
18” / 24” *
* 18” and 34 1/8”
dimension for 36” door
* 24” and 46 1/8”
dimension for 48” door
34 1/8” / 46 1/8” *
Popper Detail for
Fire Rated Device
Listings and Approvals
UL Listed
Panic Hardware
Retaining Clip
Popper
LISTED
Plug
12”
12”
Door
LISTED
Detex Limited Warranty
10 Year Mechanical/3 year Electrical
Limited Manufacturer's Warranty
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
8'x10' pairs of doors
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
November 1, 2012
California State Fire Marshall 4140-0127:105 and
3725-0127:108
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
60 SERIES
61 SERIES (Top Rod Only)
Concealed Vertical Rod Device - Narrow Stile Aluminum Door
The 60 and 61 Series concealed vertical rod exit
device is super-heavy-duty panic and fire exit
hardware for use on all types of narrow stile
aluminum doors without a mullion. The patented
mounting plate system ensures the easiest and
most accurate installation of panic hardware
available.
Top
Strike
Top
Latch
Note: For Top Rod Only Specify 61 Series
60 Series Shown (Top and Bottom Latch)
ANSI 156.3 - 2008
Grade 1
Type 6
Benefits
• Tough and durable design for
years of trouble-free service in
high-use, high-abuse
environments
• Minimal door prep saves time
and money
• Aesthetically pleasing options to
meet various applications including:
60/61 CVR Narrow Stile Alum. Door
62/63 CVR Narrow Stile H.M. Door
70/71 CVR Wide Stile Wood Door
80/81 CVR Wide Stile H.M. Door
82/83 CVR Wide Stile Alum. Door
Bottom
Latch
Bottom
Strike
• Fast and accurate installation
• Except for 03R, outside trims are
easily changed or rekeyed without
removing device from door
Features
• 6-position multi-step action in top
latch keeps top and bottom bolts
retracted until door closes and
provides more consistent
re-latching and security to door
• Top strike fully adjustable both
vertically and to accommodate a
variety of varying weather strip
thicknesses
• Top strike both secures the door
and re-engages the latchbolts
• Rods are easily adjustable with
rods installed in door
• Patented deadlocking of top (60
and 61 Series) and bottom bolt
(60 Series) assemblies
• Angled end-cap deflects damage
away from device
• Durable steel bottom drop bolt
(60 Series)
• Field sizeable
• Handed - field reversible
• 1/8 turn dogging
Mechanical Options
• F - 3-Hour Fire Rated without
astragal up to 10 foot (steel) door
• HD - Hex Dogging (Std.)
• CD - Cylinder Dogging
• SLR - Silencer
• 30 - Fits 30" Door Width - limited
electrical options
• 36 - Fits 36" Door Widths (Std.)
• 48 - Fits 48" Door Widths
Electrical Options
• Exit Alarm (EA)
• Request to Exit (EX)
• Electric Dogging (ED)
• Request to Exit for High Voltage
(EXV)
• Electric Latch Retraction (ER)
• Delayed Egress Self-Contained
(EE)
• Electric Delayed Egress x
Latch Retraction (EExER)
• EC1 - Ramped Endcap - Heavy
duty (standard on 630, 606, 612,
613, 605, 611 & 629 finishes only)
• EC2 - Flush Endcap (standard on
628, 693 & 695 Finishes only),
specify when used on 2" - 3-1/2"
stiles
Refer to Electrified Options section for
more information
Accessories
• SSK - Security Torx Screw Kit
Technical Information
• Door Types - Aluminum/
Aluminum Channel FRP
• For 2" - 3-1/2" door stiles, specify
EC2
• Fasteners - Machine and sheet
metal screws supplied standard
• Door Stile - Fits minimum 3-1/2"
• Door Thickness - Fits standard
1-3/4" - 2 1/4" (for other door
thicknesses contact factory)
• Rail is heavy ribbed aluminum
extrusion
628 / US28
629 / US32
Satin Aluminum
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
693 / SPBLK Black, painted
695 / SP313 Dark Bronze, painted
Top Latch Installation
for 60 & 61 Series
Top Strike Installation
for 60 & 61 Series
Finishes
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
Top & Bottom Latch Door
Prep for 60 & 61 Series
Release to
extend bolt
THIS AREA TO BE
UNOBSTRUCTED
COMPLETELY
THRU DOOR
LATCH MOUNTING TOP & BOTTOM
ALUMINUM DOOR ATTACHMENT
TOP
Bottom Latch Installation
for 60 Series Only
Detex Limited Warranty
10 Year Mechanical/3 year Electrical
Limited Manufacturer's Warranty
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
UL 10 B/C
8'x10' pairs of doors
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
October 18, 2012
ALUMINUM DOOR ATTACHMENT
BOTTOM
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
62 SERIES
63 SERIES (Top Rod Only)
Concealed Vertical Rod Device - Narrow Stile Hollow Metal Door
The 62 and 63 Series concealed vertical rod exit
device is super-heavy-duty panic and fire exit
hardware for use on all types of narrow stile
hollow metal doors without a mullion. The patented
mounting plate system ensures the easiest and
most accurate installation of panic hardware
available.
Top
Strike
Top
Latch
Note: For Top Rod Only Specify 63 Series
62 Series Shown (Top and Bottom Bolt)
ANSI 156.3 - 2008
Grade 1
Type 6
Benefits
• Tough and durable design
for years of trouble-free
service in high-use, high-abuse
environments
• Minimal door prep saves time
and money
Features
• 6-position multi-step action in top
latch keeps top and bottom bolts
retracted until door closes and
provides more consistent
re-latching and security to door
• Top strike fully adjustable both
vertically and to accommodate a
variety of varying weather strip
thicknesses
• Aesthetically pleasing options to
meet various applications including:
60/61 CVR Narrow Stile Alum. Door
62/63 CVR Narrow Stile H.M. Door
70/71 CVR Wide Stile Wood Door
80/81 CVR Wide Stile H.M. Door
82/83 CVR Wide Stile Alum. Door
Bottom
Latch
Bottom
Strike
• Fast and accurate installation
• Except for 03R, outside trims are
easily changed or rekeyed without
removing device from door
• Top strike both secures the door
and re-engages the latchbolts
• Rods are easily adjustable with
rods installed in door
• Patented deadlocking of top (62
and 63 Series) and bottom bolt
(62 Series) assemblies
• Angled end-cap deflects damage
away from device
• Durable steel bottom drop bolt
(62 Series)
• Field sizeable
• Handed - field reversible
• 1/8 turn dogging
Mechanical Options
• F - 3-Hour Fire Rated without
astragal up to 10 foot (steel) door
• SLR - Silencer
• HD - Hex Dogging (Std.)
• 30 - Fits 30" Door Width - limited
electrical options
• CD - Cylinder Dogging
• 36 - Fits 36" Door Widths (Std.)
• 48 - Fits 48" Door Widths
• EC1 - Ramped Endcap - Heavy
duty (standard on 630, 606, 612,
613, 605, 611 & 629 finishes only)
• EC2 - Flush Endcap (standard on
628, 693 & 695 Finishes only)
Electrical Options
• Exit Alarm (EA)
• Request to Exit (EX)
• Electric Dogging (ED)
• Request to Exit for High Voltage
(EXV)
• Electric Latch Retraction (ER)
• Delayed Egress Self-Contained
(EE)
• Electric Delayed Egress x
Latch Retraction (EExER)
Refer to Electrified Options section for
more information
Accessories
• SSK - Security Torx Screw Kit
Technical Information
• Door Types - Hollow Metal
• Door Stile - Fits minimum 4-1/2"
Finishes
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
• Door Thickness - Fits standard
1-3/4" - 2 1/4" (for other door
thicknesses contact factory)
• Fasteners - Machine and sheet
metal screws supplied standard
628 / US28
629 / US32
693 / SPBLK Black, painted
695 / SP313 Dark Bronze, painted
Satin Aluminum
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Top Latch Installation
for 62 & 63 Series
FOR HOLLOW METAL DOORS:
INSTALL BRACKET ON THIS SIDE
(OPPOSITE FOR LHR)
FOR FIRE RATED HOLLOW METAL DOORS:
INSTALL BRACKETS ON BOTH SIDES
Listings and Approvals
UL Listed
Panic Hardware
• Rail is heavy ribbed aluminum
extrusion
Bottom Latch Installation
for 62 Series Only
HOLLOW METAL DOOR
ATTACHMENT - TOP
Detex Limited Warranty
10 Year Mechanical/3 year Electrical
Limited Manufacturer's Warranty
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum (with steel door)
8'x10' pairs of doors
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
November 1, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
70 SERIES
71 SERIES (Top Rod Only)
Concealed Vertical Rod Device - Wide Stile Wood Doors
The 70 and 71 Series concealed vertical rod exit
device is super-heavy-duty panic and fire exit
hardware for use on all types of wooden double
doors without a mullion. The patented mounting
plate system ensures the easiest and most
accurate installation of panic hardware available.
Top
Strike
Top
Latch
Note: For Top Rod Only Specify 71 Series
70 Series Shown (Top and Bottom Bolt)
Bottom
Latch
ANSI 156.3 - 2008
Grade 1
Type 7
Bottom
Strike
Benefits
• Tough and durable design for
years of trouble-free service in
high-use, high-abuse
environments
• Minimal door prep saves time
and money
Features
• 6-position multi-step action in top
latch keeps top and bottom bolts
retracted until door closes and
provides more consistent
re-latching and security to door
• Top strike fully adjustable both
vertically and to accommodate a
variety of varying weather strip
thicknesses
• Aesthetically pleasing options to
meet various applications including:
60/61 CVR Narrow Stile Alum. Door
62/63 CVR Narrow Stile H.M. Door
70/71 CVR Wide Stile Wood Door
80/81 CVR Wide Stile H.M. Door
82/83 CVR Wide Stile Alum. Door
• Fast and accurate installation
• Except for 03WSV, outside trims
are easily changed or rekeyed
without removing device from door
• Top strike both secures the door
and re-engages the latchbolts
• Rods are easily adjustable with
rods installed in door
• Patented deadlocking of top (70
and 71 Series) and bottom (70
Series) bolt assemblies
• Angled end-cap deflects damage
away from device
• Durable steel bottom drop bolt
(70 Series)
• Field sizeable
• Handed - field reversible
• 1/8 turn dogging
Mechanical Options
• F - 90 Minute Fire Rated without
astragal up to 10 foot door
• SLR - Silencer
• HD - Hex Dogging (Std.)
• 30 - Fits 30" Door Width - limited
electrical options
• CD - Cylinder Dogging
• 36 - Fits 36" Door Widths (Std.)
• LD - Less Dogging
• 48 - Fits 48" Door Widths
• EC1 - Ramped Endcap - Heavy
duty (standard on 630, 606, 612,
613, 605, 611 & 629 finishes only)
• EC2 - Flush Endcap (standard on
628, 693 & 695 Finishes only)
Electrical Options
• Exit Alarm (EA)
• Request to Exit (EX)
• Electric Dogging (ED)
• Request to Exit for High Voltage
(EXV)
• Electric Latch Retraction (ER)
• Delayed Egress Self-Contained
(EE)
• Electric Delayed Egress x
Latch Retraction (EExER)
Refer to Electrified Options section for
more information
Where Trust is Built
Life Safety and Security Door Hardware
Accessories
• SSK - Security Torx Screw Kit
Technical Information
• Door Types - Wood
• Door Stile - Fits minimum 5"
Finishes
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
• Door Thickness - Fits standard
1-3/4" - 2 1/4" (for other door
thicknesses contact factory)
NOTE: For secure installation,
Detex recommends minimum
2" thick doors
• Fasteners - Wood screws
supplied standard
628 / US28
629 / US32
693 / SPBLK Black, painted
695 / SP313 Dark Bronze, painted
Satin Aluminum
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Top Latch Installation
for 70 & 71 Series
• Rail is heavy ribbed aluminum
extrusion
Bottom Latch Installation
for 70 Series Only
FOR WOOD DOORS:
INSTALL BRACKET ON THIS SIDE
(OPPOSITE FOR LHR)
FOR FIRE RATED WOOD DOORS:
INSTALL BRACKETS ON BOTH SIDES
Listings and Approvals
Detex Limited Warranty
10 Year Mechanical/3 year Electrical
Limited Manufacturer's Warranty
UL Listed
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 1-1/2 hours, maximum (wood)
8'x10' pairs of doors
Meets ADA requirements
Where Trust is Built
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
November 1, 2012
Life Safety and Security Door Hardware
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
80 SERIES
81 SERIES (Top Rod Only)
Concealed Vertical Rod Device - Wide Stile Hollow Metal Door
Designed to enhance the architectural aesthetics of any
décor, the 80 and 81 Series concealed vertical rod
exit device is also super-heavy-duty panic and fire
exit hardware for use on all types of hollow metal doors
without a mullion. The patented mounting plate system
ensures the easiest and most accurate installation of
panic hardware available.
Top
Strike
Top
Latch
Note: For Top Rod Only Specify 81 Series
80 Series Shown (Top and Bottom Bolt)
Bottom
Latch
ANSI 156.3 - 2008
Grade 1
Type 8
Benefits
• Tough and durable design
for years of trouble-free service
in high-use, high-abuse
environments
• Minimal door prep saves time
and money
Features
• 6-position multi-step action in top
latch keeps top and bottom bolts
retracted until door closes and
provides more consistent
re-latching and security to door
• Top strike fully adjustable both
vertically and to accommodate a
variety of varying weather strip
thicknesses
• Aesthetically pleasing options to
meet various applications including:
60/61 CVR Narrow Stile Alum. Door
62/63 CVR Narrow Stile H.M. Door
70/71 CVR Wide Stile Wood Door
80/81 CVR Wide Stile H.M. Door
82/83 CVR Wide Stile Alum. Door
Bottom
Strike
• Fast and accurate installation
• Except for 03WSV, outside trims
are easily changed or rekeyed
without removing device from door
• Top strike both secures the door
and re-engages the latchbolts
• Rods are easily adjustable with
rods installed in door
• Patented deadlocking of top (80
and 81 Series) and bottom bolt
(80 Series) assemblies
• Angled end-cap deflects damage
away from device
• Durable steel bottom drop bolt
(80 Series)
• Field sizeable
• Handed - field reversible
• 1/8 turn dogging
Mechanical Options
• F - 3-Hour Fire Rating without
astragal up to 10 foot (steel) door
• SLR - Silencer
• HD - Hex Dogging (Std.)
• 30 - Fits 30" Door Width - limited
electrical options
• CD - Cylinder Dogging
• 36 - Fits 36" Door Widths (Std.)
• 48 - Fits 48" Door Widths
• EC1 - Ramped Endcap - Heavy
duty (standard on 630, 606, 612,
613, 605, 611 & 629 finishes only)
• EC2 - Flush Endcap (standard on
628, 693 & 695 Finishes only)
Electrical Options
• Exit Alarm (EA)
• Request to Exit (EX)
• Electric Dogging (ED)
• Request to Exit for High Voltage
(EXV)
• Electric Latch Retraction (ER)
• Delayed Egress Self-Contained
(EE)
• Electric Delayed Egress x
Latch Retraction (EExER)
Refer to Electrified Options section for
more information
Where Trust is Built
Life Safety and Security Door Hardware
Accessories
• SSK4- Security Torx Screw Kit
• Trim Functions (see Outside Trims)
• Electrified Options (see Electrified
Options)
• Minimum Stile - 5"
• Fasteners - Machine and SelfDrilling Screws standard
Technical Information
• Door Types - Hollow Metal
• Door Thickness - Fits standard
1-3/4" - 2-1/4" (for other door
thicknesses contact factory)
Finishes
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
• Rail is heavy ribbed aluminum
extrusion
628 / US28
629 / US32
Satin Aluminum
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Top Latch Installation
for 80 & 81 Series
FOR HOLLOW METAL DOORS:
INSTALL BRACKET ON THIS SIDE
(OPPOSITE FOR LHR)
FOR FIRE RATED HOLLOW METAL DOORS:
INSTALL BRACKETS ON BOTH SIDES
Listings and Approvals
693 / SPBLK Black, painted
695 / SP313 Dark Bronze, painted
Bottom Latch Installation
for 80 Series Only
HOLLOW METAL DOOR
ATTACHMENT - TOP
Detex Limited Warranty
10 Year Mechanical/3 year Electrical
Limited Manufacturer's Warranty
UL Listed
Panic Hardware
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
LISTED
8'x10' pairs of doors
Meets ADA requirements
Where Trust is Built
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
November 1, 2012
Life Safety and Security Door Hardware
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
82 SERIES
83 SERIES (Top Rod Only)
Concealed Vertical Rod Device - Wide Stile Aluminum Door
Designed to enhance the architectural aesthetics of any
décor, the 82 and 83 Series concealed vertical rod exit
device is also super-heavy-duty panic and fire exit
hardware for use on all types of wide stile aluminum
doors without a mullion. The patented mounting plate
system ensures the easiest and most accurate
installation of panic
hardware available.
Note: For Top Rod Only Specify 83 Series
Top
Strike
Top
Latch
82 Series Shown (Top and Bottom Bolt)
Bottom
Latch
ANSI 156.3 - 2008
Grade 1
Type 8
Benefits
• Tough and durable design
for years of trouble-free service
in high-use, high-abuse
environments
• Minimal door prep saves time
and money
• Aesthetically pleasing options to
meet various applications including:
60/61 CVR Narrow Stile Alum. Door
62/63 CVR Narrow Stile H.M. Door
70/71 CVR Wide Stile Wood Door
80/81 CVR Wide Stile H.M. Door
82/83 CVR Wide Stile Alum. Door
Bottom
Strike
• Fast and accurate installation
• Except for 03WSV, outside trims
are easily changed or rekeyed
without removing device from door
Features
• 6-position multi-step action in top
latch keeps top and bottom bolts
retracted until door closes and
provides more consistent
re-latching and security to door
• Top strike fully adjustable both
vertically and to accommodate a
variety of varying weather strip
thicknesses
• Top strike both secures the door
and re-engages the latchbolts
• Rods are easily adjustable with
rods installed in door
• Patented deadlocking of top (82
and 83 Series) and bottom bolt
(82 Series) assemblies
• Angled end-cap deflects damage
away from device
• Durable steel bottom drop bolt
(82 Series)
• Field sizeable
• Handed - field reversible
• 1/8 turn dogging
Mechanical Options
• F - 3-Hour Fire Rated without
astragal up to 10 foot (steel) door
• SLR - Silencer
• HD - Hex Dogging (Std.)
• 30 - Fits 30" Door Width - limited
electrical options
• CD - Cylinder Dogging
• 36 - Fits 36" Door Widths (Std.)
Electrical Options
• 48 - Fits 48" Door Widths
• Exit Alarm (EA)
• Request to Exit (EX)
• Electric Dogging (ED)
• Request to Exit for High Voltage
(EXV)
• Electric Latch Retraction (ER)
• Delayed Egress Self-Contained
(EE)
• Electric Delayed Egress x
Latch Retraction (EExER)
• EC1 - Ramped Endcap - Heavy
duty (standard on 630, 606, 612,
613, 605, 611 & 629 finishes only)
• EC2 - Flush Endcap (standard on
628, 693 & 695 Finishes only)
Refer to Electrified Options section for
more information
Where Trust is Built
Life Safety and Security Door Hardware
Accessories
• SSK4- Security Torx Screw Kit
• Trim Functions (see Outside Trims)
• Electrified Options (see Electrified
Options)
• Door Thickness - Fits standard
1-3/4" - 2-1/4" (for other door
thicknesses contact factory)
• Fasteners - Machine and SelfDrilling Screws standard
Technical Information
• Door Types - Aluminum/
Aluminum Channel FRP
Finishes
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
Top & Bottom Latch Door
Prep for 82 & 83 Series
• Door Stile - Fits minimum 4-1/2"
• Rail is heavy ribbed aluminum
extrusion
628 / US28
629 / US32
Satin Aluminum
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
693 / SPBLK Black, painted
695 / SP313 Dark Bronze, painted
Top Latch Installation
for 82 & 83 Series
Top Strike Installation
for 82 & 83 Series
Release to
extend bolt
Detex Limited Warranty
THIS AREA TO BE
UNOBSTRUCTED
COMPLETELY
THRU DOOR
LATCH MOUNTING TOP & BOTTOM
ALUMINUM DOOR ATTACHMENT
TOP
Bottom Latch Installation
for 82 Series Only
10 Year Mechanical/3 year Electrical
Limited Manufacturer's Warranty
Listings and Approvals
UL Listed
Panic Hardware
LISTED
Where Trust is Built
UL Listed Fire Exit Hardware
LISTED
UL 10 B/C
8'x10' pairs of doors
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
October 18, 2012
ALUMINUM DOOR ATTACHMENT
BOTTOM
Life Safety and Security Door Hardware
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
Outside Trim Designs
BHMA Functions
01 - Exit only, no trim or blank escutcheon
02 - Entrance by trim when actuating bar is locked down
03 - Entrance by trim when latch bolt is released by key. Key removable only when locked.
08 - Entrance by knob or lever. Key locks or unlocks knob or lever.
09 - Entrance by knob or lever only when released by key. Key removable only when locked.
10 - Entrance by lever. Inside or outside key locks or unlocks lever.
14 - Entrance by trim when latch bolt is released by knob, lever. Always active, no cylinder.
EU - Electric Unlock Trim
EU2W - Electric Unlock Trim (doors with 4” minimum stile width)
WIDE STILE
OUTSIDE TRIM DESIGNS
Assorted outside trims provide security for all types of installations. Built to be as durable as the panic
devices, these heavy-duty trims will stand up to heavy use and abuse. The versatile design of the
trims, combined with the device mounting plate, makes changing functions as simple as replacing the
outside trim. This can easily be done without removing the exit device from the door. Wide stile trims
can be used on 10 Series Rim and 20 and 21 Series Surface Vertical Rods. Add M to most trims for
use with 30 Series Mortise devices. Add V to most trims for use with 70, 71, 80, 81, 82 and 83 Series
Concealed Vertical Rod devices. Detex uses the BHMA functions/descriptions for all trims.
C/CM/CV TRIM
S Pull Standard
01C / 01CM / 01CV
02C / 02CM / 02CV
03C / 03CM / 03CV
D/DM Trim
S Lever Standard
02D / 02DM / 02DV,
14D / 14DM / 14DV
08D / 08DM / 08DV,
09D / 09DM / 09DV,
EU / EUV (Electric Lock/
Unlock)
All Wide Stile Lever Trims come standard with a break-away type lever
to prevent permanent damage from vandalism and abuse. Once the
lever is forced past the locking point, the lever will drop down and appear
broken. The internal disengaging clutch allows the lever to be reset by
pulling it back to its original position.
S Lever
T Lever
U Lever
4 21
32
[118.1]
1
332
[77.3]
1
2
[12.7]
W/WM Trim
W/WM Trim not available
with 70 and 80 Series
01W / 01WM
03W / 03WM
WP Trim
WS/WSV Trim
WS Trim not available
with 30 Series
WP Trim available
with 70/80 Series
only
1” dia.
12”
02WP
03WS / 03WSV
Z Trim
02Z
1-5/8
03Z
Z Trim
11
Z Trim (Vandal Pull) available
with 10/20/21 Series only
70°
2-1/4
1-3/4
1-1/4
BHMA Function/Description
• 01 - Exit only, no trim or blank
escutcheon
• 08 - Entrance by knob or lever.
Key locks or unlocks knob or lever.
• 02 - Entrance by trim when
actuating bar is locked down
(dummy trim)
• 09 - Entrance by knob or lever
only when released by key. Key
removable only when locked.
• 03 - Entrance by trim when latch
bolt is released by key. Key
removable only when locked.
• 10 - Entrance by lever. Inside or
outside key locks or unlocks lever.
• 14 - Entrance by trim when
latch bolt is released by knob
or lever. Always active, no
cylinder.
• EU - Electric Lock/Unlock Fail Secure (FSE) or
Fail Safe (FSA)
Finishes
605 / US3
606 / US4
611 / US9
612 / US10
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Technical Information
• C and W Trims are Stainless
Steel
613 / US10B Oil Rubbed Bronze
629 / US32 Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
• D and WS Trims are Forged
Brass
• Wide stile trim configured for use
with BP1 or BP7 (when ordered
with 03 function) - standard on
10, 20/21 Series, BP11 or BP13
(when ordered with 03 function) standard on 70, 80/81/82/83 Series
Call factory for retrofit applications
April 26, 2011
• When ordered with device, trim
will match mounting plate specified
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
NARROW STILE
OUTSIDE TRIM DESIGNS
Assorted outside trims provide security for all types of installations. Built to be as durable as the panic
devices, these heavy-duty trims will stand up to heavy use and abuse. The versatile design of the
trims, combined with the device mounting plate, makes changing functions as simple as replacing
the outside trim. This can easily be done without removing the exit device from the door. Narrow
stile trims can be used on 40 Series Rim, 50 / 51 Series Surface Vertical Rods and 60 / 61 / 62 / 63
Concealed Vertical Rods. Detex uses the BHMA functions/descriptions for all trims.
CN / CNV TRIM
S Pull Standard
01CN,
01CNV
02CN,
02CNV
03CN,
03CNV
DN / DNV / EU2W Trim
S Lever Standard
02DN, 02DNV
14DN, 14DNV
08DN, 08DNV
09DN, 09DNV,
EU2W - wide
escutcheon
for 40/50/51
Series only
01DN
S Lever
T Lever
U Lever
WP Trim
WS Trim
WS Trim not available
with 60 Series
WP Trim available
with 60 Series
only
1” dia.
02WP
03WS
12”
R Trim
03R
4-3/8”
R Trim available
with 60 Series
only
1-5/8”
1-7/16”
BHMA Function/Description
• 01 - Exit only, no trim or blank
escutcheon
• 08 - Entrance by knob or lever.
Key locks or unlocks knob or lever.
• 02 - Entrance by trim when
actuating bar is locked down
(dummy)
• 09 - Entrance by knob or lever
only when released by key. Key
removable only when locked.
• 03 - Entrance by trim when latch
bolt is released by key. Key
removable only when locked.
• 10 - Entrance by lever. Inside or
outside key locks or unlocks lever.
• 14 - Entrance by trim when
latch bolt is released by knob
or lever. Always active, no
cylinder.
• EU2W - Electric Lock / Unlock,
wide escutcheon - Fail Secure or
Fail Safe
Finishes
605 / US3
606 / US4
611 / US9
Polished Brass
Brushed Brass
Polished Bronze
612 / US10 Brushed Bronze
613 / US10B Oil Rubbed Bronze
629 / US32
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Technical Information
• CN Trims are Stainless
Steel
• DN and WS Trims are Forged
Brass
• Narrow stile trim configured for use
with BP2 or BP8 (when ordered
with 03 function) - Standard for
use on 40, 50/51 Series, BP10
or BP12 (when ordered with 03
function) - Standard for use on
60/61, 62/63 Series
Call factory for retrofit applications
• Advantex narrow stile trim also
available for use with all Value
Series Devices
• When ordered with device, trims
will match mounting plate specified
April 26, 2011
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EU, EUV or EUxDM
ELECTRIC UNLOCK TRIM - for use with 10/20/21/30/70/71/80/81/82/83 Series Exit Device
Provides remote means of locking or unlocking a door for authorized entry, access control, security or
safety needs when used in conjunction with any Detex wide stile rim (10 Series), surface vertical rod
(20 Series), mortise (30 Series - specify EUxDM) or concealed vertical rod (70/71, 80/81, 82/83 Series
- specify EUV) exit device. Excellent source of security for stairwell doors, elevator lobbies, or other
access control systems used in installations in schools, universities, hospitals, retail, industrial, etc.
FSE/FSA
Benefits
• Retrofits over existing Detex lever
trim
• Clutching trim limits vandalism
• Key override for emergency
entrance during loss of power
(FSE)
• Spring loaded tailpiece
• Vandal resistant break-away type
lever
• EUV - Comes standard as D Trim,
with S style Lever and Fail Secure
(FSE), for use with Detex wide
stile (70/71, 80/81, 82/83 Series)
Concealed Vertical Rod Device
• EU x DM - Comes with S style
lever, for use with Detex (30
Series) Mortise Exit Device
Features
• Cylinder override
Mechanical Options
• Not Field Reversible
• EU - Comes standard as D Trim,
with S style Lever and Fail Secure
(FSE), for use with Detex wide
stile (10 Series) Rim or (20 Series)
Surface Vertical Rod Device
• EU x DT or DU - Comes with T
style or U style lever, for use with
Detex wide stile (10 Series) Rim
or (20 Series) Surface Vertical Rod
Device
• EUV x DT or DU - Comes with T
style or U style lever, for use with
Detex wide stile (70/71, 80/81,
82/83 Series) Concealed Vertical
Rod Device
Electrical Options
• Fail Secure (FSE) - During power
failure, device will be locked
(Security option)
ex: EU x FSE x DU
• Fail Safe (FSA) - During power
failure, the trim will always be
unlocked. (Life Safety option)
ex: EU x FSA x DM
• Not Field Selectable
• Not Field Selectable
• EU x DMT or DMU - Comes with
T style or U style lever, for use
with Detex (30 Series) Mortise
Exit Device
Lever Options
S Lever
T Lever
U Lever
Accessories
• MC65 - Mortise Cylinder
• IC7 - 7-pin Mortise Cylinder
Housing (Core not included)
• 80-800 - 24 VDC power supply
with battery charging circuit
• CCL - Long cyllinder collar (11/16”)
• SE-2 - Shaft extension for 2 to
2 1/2” thick doors
• 90-800 - 24 VDC power supply
without battery charging circuit
Finishes
605 / US3
606 / US4
611 / US9
Polished Brass
Brushed Brass
Polished Bronze
612 / US10 Brushed Bronze
613 / US10B Oil Rubbed Bronze
629 / US32
Technical Information
Dimensions
Detex Limited Warranty
• 24VDC / 150ma continuous duty
Front View
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Side View
10 Year Mechanical/3 Year Electrical
Limited Manufacturer’s Warranty
Wiring Diagram
+24VDC
-24VDC
NC for FSA
NO for FSE
+
_
Listings and Approvals
Back View
MIL-STD 810F (G), Method 509.4
(Salt Fog Test)
MIL-STD 810F (G), Method 506.4
(Driving Rain), Procedure 1
4 Posts
7
UL1034
- 33 Temperature
TemperatureSection
Section
UL 1034-34
34 33
[Temperature Range -31° F (-35° C) to
150° F (+66° C)]
UL1034
- 53 Dust
DustSection
Section
UL 1034-54
54 53
1-3/8
October 18, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EU2W
ELECTRIC UNLOCK TRIM - for use with 40/50/51/V40/V50/V51 Series Exit Device
Provides remote means of locking or unlocking a door for authorized entry, access control, security
or safety needs when used in conjunction with any Detex 40/V40 Series rim or 50/51/V50/V51 Series
surface vertical rod exit device on doors with a minimum stile width of 4”. Excellent source of security
for access control systems used in installations in schools, universities, hospitals, retail, industrial, etc.
FSE/FSA
Benefits
• Clutching trim limits vandalism
• Key override for emergency
entrance during loss of power
(FSE)
Features
• Cylinder override
• Spring loaded tailpiece
Mechanical Options
• Not Field Reversible
• EU2W - Comes standard as
D Trim, with S style Lever and
Fail Secure (FSE), for use with
Detex 40/V40 Series Rim or
50/51/V50/V51 Series Surface
Vertical Rod Device
• EU2W x DT or DU - Comes
with T style or U style lever, for
use with Detex 40/V40 Series
Rim or 50/51/V50/V51 Series
Surface Vertical Rod Device
Electrical Options
• Fail Secure (FSE) - During power
failure, device will be locked
(Security option)
ex: EU x FSE
• Fail Safe (FSA) - During power
failure, the trim will always be
unlocked. (Life Safety option)
ex: EU x FSA
• Not Field Selectable
• Not Field Selectable
• Vandal resistant break-away type
lever
Lever Options
S Lever
T Lever
U Lever
Accessories
• MC65 - Mortise Cylinder
• IC7 - 7-pin Mortise Cylinder
Housing (Core not included)
• 80-800 - 24 VDC power supply
with battery charging circuit
• 90-800 - 24 VDC power supply
without battery charging circuit
• CCL - Long cyllinder collar (11/16”)
• SE-2 - Shaft extension for 2 to
2 1/2” thick doors
Finishes
605 / US3
606 / US4
611 / US9
Polished Brass
Brushed Brass
Polished Bronze
612 / US10 Brushed Bronze
613 / US10B Oil Rubbed Bronze
629 / US32
Technical Information
Dimensions
Detex Limited Warranty
• 24VDC / 150ma continuous duty
Front View
Side View
Wiring Diagram
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
10 Year Mechanical/3 Year Electrical
Limited Manufacturer’s Warranty
NC for FSA
+24VDC
NO for FSE
-24VDC
+
_
Listings and Approvals
Back View
MIL-STD 810F (G), Method 509.4
(Salt Fog Test)
MIL-STD 810F (G), Method 506.4
(Driving Rain), Procedure 1
UL1034 - 34 Temperature Section 34
[Temperature Range -31° F (-35° C) to
150° F (+66° C)]
UL1034 - 54
Dust
November 1, 2012
Section 54
2 Posts
7
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
Electrified Options
Electrified Options Definitions
EA
ED
Electric Dogging
EE
Electric Delayed Egress
EExER
Electric Delayed Egress with Latch Retraction
EI
Electric Integration - Includes ES Switches, piezo, key switch and 2 LEDs
EM
Electric Delayed Egress with Magnetic Lock
ER
Electric Latch Retraction
Exit Alarm with 9VDC/12VAC, Remote Bypass and Remote Signal Relay
ES/EX/EXV/
EXxW/LX
Electric Switching and Signaling
EU
Electric Unlock Trim
EU2W
Electric Unlock Trim (Used on doors with 4” minimum stile width)
Accessories
All Electrified Options are available on Fire Exit Hardware and Hurricane Rated Devices
®
Exit Alarm (EA)
The Exit Alarm (EA) device option is designed for areas that require a stand-alone alarm on an
emergency exit door. The alarm will sound when someone attempts to exit a door by depressing the
pushpad, alerting management that violation has occurred. The internal alarm with remote signal and
remote bypass capabilities is ideal for doors where both security and life safety are a concern.
Shown with Factory Installed Mortise Cylinder - Sold Separate
(10 Series Rim Exit Device shown - Available with 10/40 Rim, 30 Mortise, 20/21/50/51 Surface Vertical Rod Devices
and 60/61/62/63/70/71/80/81/82/83 Concealed Vertical Rod Devices)
Benefits
• Controls foot traffic, deters
unauthorized exits, prevents
loss and meets building code
requirements
• Reduced employee and customer
theft
• One cylinder provides arming,
disarming and dogging
• Fast and easy installion
• Durable electornics provide years
of trouble-free service, saving on
replacement costs
Features
• Powered by standard 9-volt
battery or 12V or 24V AC/DC
power with 9-volt battery backup
• Arming delay - Factory default is
15 second delay after key reset.
1 second or 5 second delays also
available. Call factory
• Mortise cylinder key switch arming
• Manual/Auto Rearming - Factory
default is field-selectable for
manual key arming or 2 minute
auto rearm. 10 minute and 20
minute auto rearm also available.
Call Factory
• Low Battery Alert (Audible/Visual)
• CD - Cylinder Dogging
• SLR - Silencer
• LD - Less Dogging
• KS - Key Stop (Key removed only
when armed)
• Add to existing
10/20/21/30/40/50/51 device by
adding EA slide-in filler (specify
finish and door width)
• 100dB alarm
• State-of-the-art electronics offer
reliable security and
instantaneous alarm
• Visual and audible arming
indicators
• Through-wire hinge or power
transfer compatible
Mechanical Options
Accessories
• FCA - Flex Conduit End Cap Kit
(End cap mounted)
• AL18 - Surface Armored Loop
(Door/Frame mounted)
• PT5 - Power Transfer
• Optional Cylinder Nut Wrench
P/N: 103779
• PP-5152-3 - 12 VAC Transformer
• PP-5152-2 - 24 VAC Transformer
Finishes (Advantex)
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
Riser Diagram
Bypass / Remote Signal
Aluminum Satin
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
693 / SPBLK Black, Painted
695 / SP 313 Dark Bronze, Painted
Listings and Approvals
(on 10 and 40 Series Devices)
Listings and Approvals
(on 20/21/50/51 Series Devices)
12VAC
(Optional)
628 / US28
629 / US32
UL Listed
Panic Hardware
LISTED
LISTED
EA Exit Alarm
Filler 9VDC
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable
Mullion
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
8'x10' pairs of doors
Meets ADA requirements
Meets ADA requirements
UBC 97, Standard 7-2 and
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
Power Connections
UL Listed
Panic Hardware
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
California State Fire Marshall 4140-0127:105 & 3725-0127:108
State of Florida Approval
FL9052
California State Fire Marshall 4140-0127:105 and
3725-0127:108
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
October 18, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
Electric Dogging (ED)
The Electric Dogging (ED) device option is designed for entrance and exit doors with panic or fire
exit hardware. When energized, and after the pushpad is depressed, the pushpad and the latch bolt
remain retracted, providing push-pull operation. Relocking all devices is accomplished by using a
single switch or through a fire alarm input.
(10 Series Rim Exit Device shown - Available with 10/40 Rim, 30 Mortise, 20/21/50/51 Surface Vertical Rod Devices
and 60/61/62/63/70/71/80/81/82/83 Concealed Vertical Rod Devices)
Benefits
• One-touch operation turns any
secured door or group of doors
into push-pull openings and
releases them as required
Features
• Maintained latch and pushpad
retraction
Mechanical Options
• FC - Flex Conduit and End Cap
Electrical Options
• Request to Exit (EX)
Technical Information
• Fire rated devices require fire
alarm panel interface for fire
code compliance
• Door remains locked until first
activation of pushpad (exit)
• Simple mounting and wiring
provide quick, trouble free
installation, saving time and
money
• Continuous duty magnet
• Economical alternative to latch
retraction when only dogging is
required
• Pushpad remains depressed while
latch is retracted, preventing
unnecessary cycling, for quieter
operation
• Operates on 24VAC or 24VDC
• AL-18 - Surface Armored Loop
(Door/Frame mounted)
• 80-800 Power Supply - 24VDC
filtered, regulated with fire loop
connection
• PP-5152-2 24VAC Transformer
Finishes (Advantex)
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
115VAC
input
Aluminum Satin
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Listings and Approvals
(on 10 and 40 Series Devices)
Riser Diagram
80-800 Power Supply
(sold separately)
628 / US28
629 / US32
EX - Request
to
Exit Switch
Output
(optional)
UL Listed
Panic Hardware
Panic Hardware
LISTED
ED ELECTRIC
DOGGING
Listings and Approvals
(on 20/21/50/51 Series Devices)
UL Listed
LISTED
Activation
Switch
693 / SPBLK Black, Painted
695 / SP 313 Dark Bronze, Painted
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable
Mullion
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
8'x10' pairs of doors
Meets ADA requirements
Meets ADA requirements
UBC 97, Standard 7-2 and
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval
FL9052
California State Fire Marshall 4140-0127:105 and
3725-0127:108
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
California State Fire Marshall 4140-0127:105 & 3725-0127:108
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
October 18, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
Delayed Egress Rim Exit Device (EE)
The Delayed Egress Rim Exit Device (EE) is designed for primary and secondary exits and provides
a secure 15-second delay and a 100dB alarm when someone attempts to exit. This 15-second delay
allows time for management to respond to the alarm before someone exits and the alarm deters the
exit from occurring. Per life safety requirements, the EE must be provided with a fire alarm input, thus
providing a system override during a fire emergency. The EE provides security while meeting all life
safety concerns, offering an exceptional value.
Power Supply Included
as standard feature
Shown with factory
installed mortise
cylinder
(10 Series Rim Exit Device shown - Available with 10/40 Rim, 30 Mortise, 20/21/50/51 Surface Vertical Rod Devices
and 60/61/62/63/70/71/80/81/82/83 Concealed Vertical Rod Devices)
Benefits
• Fast and easy installation
• Secure installation prevents
mistakes, enhances security and
reduces maintenance
• Fits almost any door in any décor
Features
• Powered by a 24VDC filtered and
regulated power supply
• Panic Device and power supply
have passed testing for
electrostatic discharge (ESD) by
an independent testing laboratory
• Power supply delivers a constant
24VDC of filtered and regulated
voltage at a rated load of 1A,
including ripple rejection and
transient noise suppression
circuitry
• Stainless steel, 3/4" deadlocking
Pullman-type latch bolt
• Non-handed, field sizeable
• 100dB alarm
• Provides immediate egress while
securing against entry during a
power failure/fire alarm
• Durable design provides years of
trouble-free protection, saving on
replacement costs
• One cylinder provides arming,
disarming and dogging
• Heavy-duty angled end-cap
• Heavy-duty ribbed aluminum rail
extrusion
• Accommodates all types of
mortise cylinders with a
standard Yale cam
• Patented mounting plate and
strike locator system provide
perfect alignment with door and
frame
• Single mortise cylinder provides
arming and dogging - can be
factory installed
• State-of-the-art electronics offer
reliable security and instantaneous
alarm
• Controls foot traffic, deters
unauthorized exits, prevents
loss and meets building code
requirements
• Can be combined with ER Option
and operator to provide Delayed
Egress and an automatic door
(See EExER Option)
• 9V battery provides alarm function
only in case of power failure
• Armed and disarmed field
selectable status indicator
• Delayed arming allows arming
after door closes
• Remote signal output and remote
bypass input standard
• Alarm triggered by latch bolt
movement
• Fire alarm input can be connected
at power supply or panic bar
• Includes delayed egress panic bar,
24VDC filtered and regulated
power supply, and door sign
• 1/8 turn cylinder dogging
• Visual and audible arming
indicators
Mechanical Options
• MC65 - Factory Installed Mortise
cylinder
• CD - Cylinder Dogging (Std.)
• 99 - Surface Strike (Std.)
• LD - Less Dogging
• 98 - Semi Mortise Strike
• IC7 - Factory Installed IC Housing
• F - 3-Hour Fire Rated
• H - Hurricane rating
• SLR - Silencer
• KS - Key Stop (Key removed only
when armed)
• 36" Door Width (Std.)
• 48" Door Width
Where Trust is Built
Life Safety and Security Door Hardware
Electrical Options
• 30 - 30 second delayed egress
available (must have letter from
AHJ)
Accessories
• SN1 - Sex Nut fasteners
• Outside trim options (See
Advantex Trim Options)
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
Other Advantex delayed egress
panic devices include:
• AL18 - Surface Armored Loop
(Door/Frame mounted)
• Delayed Egress with
Electromagnetic Lock (EM)
• PT5 - Power Transfer
• Optional Cylinder Nut Wrench
P/N: 103779
• SI- Status Indicators - Armed/
Disarmed
• Foreign Language Signs available
Contact Factory
• Door Stile - See applicable device
page
• Machine and Self-Drilling
fasteners (Std.)
• Optional Sex Nuts or Security
Torx Screws available
• Door Thickness - Fits standard
1 3/4" - 2 1/4"
Finishes (Advantex products)
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
628 / US28
629 / US32
Aluminum Satin
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
693 / SPBLK Black, Painted
695 / SP 313 Dark Bronze, Painted
Terminal Block
Riser Diagram
Detex Limited Warranty
TERMINAL BLOCK
To Fire Alarm
System
Filtered and Regulated
Power Supply with
Fire Alarm System Loop
24VDC
(Power Supply
Included Standard)
1 2 3 4 5 6 7 8 9 10 11 12
24 VDC
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
POWER
POWER
FACTORY INSTALLED
Remote Bypass
(+)
(-)
COMMON
Bypass Relay Output
OPEN
CLOSED
COMMON
Alarm Relay Output
OPEN
CLOSED
Listings and Approvals
(on 10 and 40 Series Devices)
Listings and Approvals
(on 20/21/50/51 Series Devices)
UL Listed
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable
Mullion
Meets ADA requirements
UBC 97, Standard 7-2 and
UL Listed
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
8'x10' pairs of doors
Meets ADA requirements
UL10C for positive pressure
ANSI/BHMA certified A156.3
UBC 97, Standard 7-2 and
UL10C for positive pressure
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
State of Florida Approval
FL9052
for Life Safety
California State Fire Marshall 4140-0127:105 and
3725-0127:108
California State Fire Marshall -
October 18, 2012
Where Trust is Built
4140-0127:105 and
3725-0127:108
Life Safety and Security Door Hardware
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
Delayed Egress with Latch Retraction (EExER)
(Patented)
Delayed Egress with Latch Retraction (EExER) is designed for applications where both delayed egress
and remote unlocking, remote dogging, access control or an automatic door operator is desired. An
optional EX Request to Exit Switch may be added for push pad monitoring or LX Switch for latch bolt
monitoring. The 100 dB alarm, will sound when someone attempts to exit but the door will remain
locked for 15 seconds, deterring unauthorized exits and providing time to respond to the alarm. Ideal
for restricted areas, access controlled doors, and any door requiring authorized entry or exit, while
preventing unauthorized entry or exit. Perfect for fire-rated, cross corridor, access controlled, delayed
egress doors with automatic operators, all without using magnetic locks or electric strikes.
Logic
Controller /
Power Supply
Required but
not included
(10 Series Rim Exit Device shown - Available with 10/40 Rim, 30 Mortise, 20/21/50/51 Surface Vertical Rod Devices
and 60/61/62/63/70/71/80/81/82/83 Concealed Vertical Rod Devices)
Benefits
• All delayed egress and access
control functions are implemented
in the exit device, no external
magnets, electric strikes or
electric trims are needed
• 15-second delay prevents
unauthorized exit, reduces theft
and protects those trying to exit
• Use of any access control system
and latch retraction allows entry/
exit for any authorized card holder
• Required fire alarm input provides
life safety override for immediate
exit during a fire emergency
• Easy-to-operate with visual and
audible arming indicators
• Simple mounting and wiring
provide quick, trouble-free and
secure installation saving time and
money
• Available as stand-alone or fullyintegrated EasyKit
Features
• Heavy-duty, Grade 1 exit device
stands up to extreme high traffic
conditions
• Wall mounted remote interface
module with red/green LEDs
provide visual arming indication
• 100dB alarm demands attention,
even in noisy environments,
helping prevent unauthorized exits
• Automatic rearm occurs after
authorized entry and exit
• Available in various finishes and
with assorted trims to fit any
application or décor
• Optional Cylinder Nut Wrench
P/N: 103779
• AL18 - Surface Armored Loop
(Door/Frame Mounted)
• Through-wire hinge or power
transfer compatible
Mechanical Options
• FC - Flex Conduit and End Cap
(ex. 10xEExERxFC)
• KS - Key Stop, key removed only
when armed
• Foreign Language Signs Available
- Contact Factory
Electrical Options
• Request to Exit Switch (EX)
• 30 - 30 Second Delayed Egress
(ex. 10xEExERx30)
• LX - Latch Bolt Monitor / Latch
Secure Switch
Technical Information
EExER Panic Device:
Remote Interface Module:
• Power and logic requirements
supplied by 84-800 Logic
Controller and Power Supply
designed for single door
application
• Wall mounted
• 85-800 Logic Controller and
Power Supply designed for
double door applications
• 84-800 amp draws at 1.2 Amps
@ 24 VDC
• Detachable plug-in terminal strip
• Dummy cylinder included
• May also be used with 5, 6 or 7-pin
standard and interchangeable core
cylinder
84-800 / 85-800 Logic Controller
and Power Supply
• Remote bypass output .5A@24VAC/VDC Max.
• Remote bypass input
• Available in Surface or Flush mount
• Available in Gray or Black Finish
• 85-800 amp draws at 2.5 Amps
@ 24 VDC
• Fire alarm input - Requires a
closed contact (when powered)
of a locally approved fire alarm
system
Device Finishes
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
Riser Diagram
From remote switch
(optional)
From 120VAC source
J
Detex Logic Controller
and Power Supply
Model 84-800
(must be ordered
separately)
Remote Alarm
(optional)
693 / SPBLK Black, Painted
695 / SP 313 Dark Bronze, Painted
Listings and Approvals
Detex Limited Warranty
UL Listed
Panic Hardware
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable Mullion
Detex Remote interface Module
(included)
UBC 97, Standard 7-2 and
Outside Inside
UL10C for positive pressure
Detex Keypad
or Card Readers
(optional)
J
J-box
(not included)
October 18, 2012
Aluminum Satin
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Meets ADA requirements
Detex
door sign
for
Delayed Egress
(included)
Detex EExER
Panic Hardware
(included)
628 / US28
629 / US32
Detex flexible conduit
with connections
(optional)
ANSI/BHMA certified A156.3,
A156.2-2001 and A156.24
Meets NFPA 80 & 101
for Life Safety
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
Electric Integration (EI)
The Electric Integration device, designed for applications where electric integration is required, provides
the customer with a means of integration to new or existing systems, including the Detex Series 800
Logic Controller. The customer may select from these components to integrate and create different
functions from the single product package. This variety of components offers an alarm to sound,
monitor the latch bolt position and/or pushpad when depressed, signals a remote panel by key switch
operation when activated from inside or outside authorization, and offers 2 LED's to enhance required
functions. The operation of switches will open or close (SPDT) to integrate with digital video recorders,
remote alarms, strobe lights, or commence the cycle in a separate delayed egress system.
Shown with Factory Installed Mortise Cylinder - Sold Separate
10 Series Rim Exit Device shown
Available with all Advantex rim (10/40) and mortise (30)
Benefits
• Fast and easy installation
• Multiple switching choices for
ease-of-use
Features
• State-of-the-art electronics for
reliable instantaneous switch
activation
• Tamper resistant switching
monitors dead latch and outside
trim input
• 100dB Piezo Alarm
Mechanical Options
• LD - Less Dogging
• F - 3-Hour Fire Rated
Electrical Options
• 10-800 or 11-800 Logic Controller
and Power Supply for Electric
Integration (required but not
included
• Durable electronics provide years
of trouble free service, saving on
replacement costs
• Controls foot traffic, deters
unauthorized exits, prevents loss
and meets building code
requirements
• Mortise cylinder key switch
output (Form C)
• Cylinder dogging (Std.) except
with fire rated devices
• Pushpad/Latch bolt position
switch outputs
• Authorized access switch output
• (3) Standard SPDT (Form C)
switches
• H - Hurricane Rated
• Integrate with logic controllers,
power supplies and most security
equipment, to provide reliable,
integrated loss prevention
protection
• Simple "plug-in" header type
terminal strip located near end-cap
for easy installation
• Dual LED visual arming indicators
(one red, one green)
• All switching capable of handling
12 or 24 Volts AC or DC
• Code-compliant door sign
(English)
• KS - Key Stop - key removed only
when armed
Accessories
• FC - Flex Conduit and End Cap
Fitting
• MC65 - Pre-installed Mortise
Cylinder
• IC7 - Pre-installed Interchangeable
Core Cylinder
• SSK - Security Torx Screws
• EWH8-626 - Electric Wire Hinge
• SN1 - Sex Nuts
• Optional Cylinder Nut Wrench
P/N: 103779
• AL18 - Surface Armored Loop
(door/frame mount)
• PT5 - Power Transfer
• Foreign Language Signs available
• Machine and self-drilling screws
(Std.)
• Through-wire hinge or power
transfer compatible
628 / US28
629 / US32
693 / SPBLK Black, Painted
695 / SP 313 Dark Bronze, Painted
Technical Information
• Detachable plug-in terminal strip
• Switch jumpers for NO/NC
contacts
Finishes (Advantex)
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
Riser Diagram
Aluminum Satin
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Dimensions
Remote Monitor Output
Key switch Output
Siren Input
LED Inputs
18”
32 1/2”
Listings and Approvals
(on 10 and 40 Series Devices)
Listings and Approvals
(on 20/21/50/51 Series Devices)
UL Listed
UL Listed
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable
Mullion
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
8'x10' pairs of doors
Meets ADA requirements
UBC 97, Standard 7-2 and
UBC 97, Standard 7-2 and
UL10C for positive pressure
UL10C for positive pressure
ANSI/BHMA certified A156.3
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
Meets NFPA 80 & 101
for Life Safety
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
California State Fire Marshall -
California State Fire Marshall 4140-0127:105 and
3725-0127:108
October 18, 2012
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
Panic Hardware
LISTED
Meets ADA requirements
State of Florida Approval
FL9052
Detex Limited Warranty
4140-0127:105 & 3725-0127:108
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
Delayed Egress with Magnetic Locking (EM)
The Delayed Egress Magnetic Locking (EM) option provides a secure 2-point locking device with
15-second delay and a 100dB alarm when someone attempts to exit. This delay allows those in
charge the time to respond to the alarm before a potential violation occurs. The Delayed Egress
Magnetic Locking option device must be wired to the fire alarm (sprinkler system, smoke detection,
etc.) that allows a system override in the event of a fire emergency situation, per building code
requirements. Provides exceptional security without forfeiting life safety for retail establishments,
schools, universities, hospitals, manufacturing facilities, etc.
Power Supply Included
as standard feature
Shown with factory
installed mortise
cylinder
(10 Series Rim Exit Device shown - Available with 10/40 Rim devices)
Benefits
• Fast and easy installation
• 2-point locking provides tandemholding force of latch bolt
(1400 lb) and electromagnetic
lock (1500 lb)
Features
• Powered by a 24VDC filtered and
regulated power supply
• Panic Device and power supply
have passed testing for
electrostatic discharge (ESD) by
an independent testing laboratory
• Power supply delivers a constant
24VDC of filtered and regulated
voltage at a rated load of 1A,
including ripple rejection and
transient noise suppression
circuitry
• Stainless steel, 3/4" deadlocking
Pullman-type latch bolt
• Non-handed, field sizeable
• 100dB alarm
• 1/8 turn cylinder dogging
Mechanical Options
• MC65 - Factory Installed Mortise
cylinder
• IC7 - Factory Installed IC Housing
• Durable design provides years of
trouble-free protection
• Reduces employee and customer
theft
• Fits almost any door in any décor
• One cylinder provides arming,
disarming and dogging
• Heavy-duty angled end-cap
• Heavy-duty ribbed aluminum rail
extrusion
• Accommodates all types of
mortise cylinders with a
standard Yale cam
• Patented mounting plate and
strike locator system provide
perfect alignment with door and
frame
• Single mortise cylinder provides
arming and dogging - can be
factory installed
• State-of-the-art electronics offer
reliable security and instantaneous
alarm
• 9V battery provides alarm function
only in case of power failure
• Armed and disarmed field
selectable status indicator
• Delayed arming allows arming
after door closes
• Remote signal output and remote
bypass input standard
• Alarm triggered by latch bolt
movement
• Fire alarm input can be connected
at power supply or panic bar
• Visual and audible arming
indicators
• Includes delayed egress panic bar,
24VDC filtered and regulated
power supply, 1500 lb
electromagnetic lock and door
sign
• CD - Cylinder Dogging (Std.)
• 99 - Surface Strike (Std.)
• LD - Less Dogging
• 98 - Semi Mortise Strike
• F - 3 Hour Fire Rating
• KS - Key Stop (Key removed only
when armed)
• 36" Door Width (Std.)
• H - Hurricane rating
• 48" Door Width
• FC - Flex Conduit and End Cap
• Controls foot traffic, deters
unauthorized exits, prevents loss
and meets code requirements
Where Trust is Built
Life Safety and Security Door Hardware
Electrical Options
• 30 Second Delayed Egress
(must have letter from AHJ)
• AL18 - Surface Armored Loop
(Door/Frame mounted)
• PT5 - Power Transfer
• Outside trim options (See
Advantex Trim Options)
• Foreign Language Signs available
Contact Factory
• Door Stile - See applicable device
page
• Machine and Self-Drilling
fasteners (Std.)
Accessories
• SN1 - Sex Nut fasteners
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Optional Sex Nuts or Security
Torx Screws available
• Door Thickness - Fits standard
1 3/4" - 2 1/4"
Finishes (Advantex)
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
Riser Diagram
628 / US28
629 / US32
Aluminum Satin
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
693 / SPBLK Black, Painted
695 / SP 313 Dark Bronze, Painted
Terminal Block
Listings and Approvals
(on 10 and 40 Series Devices)
To Fire Alarm
System
TERMINAL BLOCK
1
Filtered and Regulated
Power Supply with
Fire Alarm System Loop
24VDC
(Power Supply
Included Standard)
2
3
4
5
6
7
8
UL Listed
Panic Hardware
9 10 11 12
LISTED
24 VDC
POWER
POWER
FACTORY INSTALLED
Remote Bypass
(+)
(-)
COMMON
Bypass Relay Output
OPEN
^
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable
Mullion
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
CLOSED
J
COMMON
Alarm Relay Output
ANSI/BHMA certified A156.3
OPEN
CLOSED
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval
FL9052
California State Fire Marshall 4140-0127:105 and
3725-0127:108
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
Where Trust is Built
Life Safety and Security Door Hardware
October 18, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
Electric Latch Retraction (ER)
The Electric Latch Retraction (ER) function is designed for entrance and exit doors with panic or fire
exit hardware where remote unlocking, remote dogging, access control or automatic door operator is
desired. An optional EX switch may be added to pushpad monitoring.
(10 Series Rim Exit Device shown - Available with 10/40 Rim, 30 Mortise, 20/21/50/51 Surface Vertical Rod Devices
and 60/61/62/63/70/71/80/81/82/83 Concealed Vertical Rod Devices)
Benefits
• Works with any type of access
control system
• Simultaneous pushpad and latch
bolt retraction provides smooth
surface with no catch points
• Provides a means for remote
dogging and lock-down
• Low voltage with no high power
in-rush
• Momentary or maintained latch
and pushpad retraction
• Long term dogging capability
• Continuous duty motor for quiet
operation - no solenoid
• Simultaneous latch and pushpad
retraction
Features
• Fast and easy installation
• Switches to monitor pushpad,
latch bolt and outside trim input
Mechanical Options
• FC - Flex Conduit and End Cap
Electrical Options
• Latch Retraction power supplies
are required and sold separately
Technical Information
• Voltage 24VDC
• AL18 - Surface Armored Loop
(door/frame mounted)
• PT5 - Power Transfer
• 81-800 - Power Supply for single
door
82-800 - Power Supply for pair of
doors
83-800 - Power Supply for two
independent doors
• EX Exit Switch - Pushpad monitor
switch
• LX - Latch bolt monitor / Latch
Secure Switch
Finishes (Advantex)
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
Riser Diagram
Controller and
Power Supply
(81-800 Shown sold separately)
EX - Request to
Exit Switch
Output
(optional)
115VAC
input
628 / US28
629 / US32
Aluminum Satin
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
693 / SPBLK Black, Painted
695 / SP 313 Dark Bronze, Painted
Riser Diagram
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
82-800 Shown - 81-800, 83-800 Similar
POWER IN J1
INPUT 1 J6
INPUT 2 J5
INPUT 3 J4
DOOR 2 OUT J3
DOOR 1 OUT J2
DOOR SIGNAL J7
OPT 12VDC
MODULE
J2
15 14 13
12 11 10 9
8 7
6 5 4 3
2 1
Output
+12VDC
-12VDC
Dry Contact
Input
ER ELECTRIC
LATCH RETRACTION
Auto Opener Output
Dry contact
N.O.
COM
N.C.
24VDC Output 1
24VDC Output 2
Dry Contact Inputs
Dry Contact Inputs
Dry Contact Inputs
From power board
Listings and Approvals
(on 10 and 40 Series Devices)
Listings and Approvals
(on 20/21/50/51 Series Devices)
UL Listed
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable
Mullion
UL Listed
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
8'x10' pairs of doors
Meets ADA requirements
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
for Life Safety
State of Florida Approval
FL9052
California State Fire Marshall -
California State Fire Marshall 4140-0127:105 and
3725-0127:108
October 18, 2012
4140-0127:105 & 3725-0127:108
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
Switching & Signaling Options
ES - Electric Switching
The Electric Switching (ES) option includes two switches; one to monitor the latch bolt position and the
other to monitor mechanical access from the exterior. It is designed for doors that require a means of
indicating when the latch bolt is retracted while providing an alarm inhibit when using key entry. Always
used in conjunction with other security systems, the Advantex ES function provides switch jumpers to field
select either normally closed or normally open contacts that can provide a signal to a variety of different
components such as remote alarm or a central station.
Available with 10/40 Series Rim Exit Devices
EX - Request to Exit
The Request to Exit (EX) signaling option is used on exit doors with panic or fire exit hardware. This
option indicates when the pushpad is depressed sending a signal to an alarm or sends a remote signal
to monitor egress conditions.
Available with 10/40 Series Rim, 30 Series Mortise, 20/21/50/51 Series Surface Vertical Rod and
60/61/62/63/70/71/80/81/82/83 Series Concealed Vertical Rod Devices
EXxW - Weatherized Request to Exit
For use on doors or gates that require a means of signaling when someone depresses the
pushpad on the panic device during egress in a moist, outdoor or other such application.
Always used in conjunction with other security items, the EXxW provides a normally closed
or normally open contact signal to a logic controller. The controller will turn on a remote
horn or strobe, control a magnetic lock during egress or initiate a delayed egress system. The EXxW is
UL listed as panic and fire exit hardware as well as UBC standard 7-2 (positive pressure).
The EXxW meets the following standards: Mil 810F(G), 509.4 - Salt Fog, Mil 810F(G), 506.4 - Driving
Rain Procedure 1, UL1034-34 Temperature Section 34 [Temperature Range -31° F (-35° C) to 151° F
(+66° C)], and UL-1034-54 Dust Section 543. Available with 10/40 Series Rim, 30 Series Mortise and
20/21/50/51 Series Surface Vertical Rod
Devices
EXV - Request to Exit High Current / Voltage
The Request to Exit High Current switching option, can be used to control power to a device that requires
higher current up to 2.0 amperes; such as an electro-magnetic lock, electric strike or motor.
Available with 10/40 Series Rim, 30 Series Mortise, 20/21/50/51 Series Surface Vertical Rod and
60/61/62/63/70/71/80/81/82/83 Series Concealed Vertical Rod Devices
Also available EXVxW (Weatherized Request to Exit High Current / Voltage)
The EXVxW meets the following standards: Mil 810F(G), 509.4 - Salt Fog,
Mil 810F(G), 506.4 - Driving Rain Procedure 1, UL1034-34 Temperature Section 34
[Temperature Range -31° F (-35° C) to 151° F (+66° C)],
and UL-1034-54 Dust Section 54. Available with 10/40 Series Rim, 30 Series Mortise,
and 20/21/50/51 Series Surface Vertical Rod Devices
LX - Latch Bolt Monitor
The Latch Bolt Monitor (LX) offers an internally mounted signal switch that monitors the position of the
latch bolt. When used in conjunction with a door position switch, the Advantex Latch Bolt Monitor Switch
(LX) can be used to insure a door is secure, signal when a door is opened and closed or send an alert
when someone attempts to tamper with the latch bolt. Common uses would include signalling a security
guard or nurses station. When an Advantex device is used on an opening with an automatic operator the
LX can signal when the latch is retracted before the operator opens the door.
Available with 10/40 Series Rim Exit Devices
The LX(V) can be combined with the optional Advantex ER, electric latch retraction, as well as many
electrified options including, EA, ED, EE, EExER, EX, EXV, AND EXxW.
Available with 10/40 Series Rim Exit Devices
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
October 18, 2012
EU, EUV or EUxDM
ELECTRIC UNLOCK TRIM - for use with 10/20/21/30/70/71/80/81/82/83 Series Exit Device
Provides remote means of locking or unlocking a door for authorized entry, access control, security or
safety needs when used in conjunction with any Detex wide stile rim (10 Series), surface vertical rod
(20 Series), mortise (30 Series - specify EUxDM) or concealed vertical rod (70/71, 80/81, 82/83 Series
- specify EUV) exit device. Excellent source of security for stairwell doors, elevator lobbies, or other
access control systems used in installations in schools, universities, hospitals, retail, industrial, etc.
FSE/FSA
Benefits
• Retrofits over existing Detex lever
trim
• Clutching trim limits vandalism
• Key override for emergency
entrance during loss of power
(FSE)
• Spring loaded tailpiece
• Vandal resistant break-away type
lever
• EUV - Comes standard as D Trim,
with S style Lever and Fail Secure
(FSE), for use with Detex wide
stile (70/71, 80/81, 82/83 Series)
Concealed Vertical Rod Device
• EU x DM - Comes with S style
lever, for use with Detex (30
Series) Mortise Exit Device
Features
• Cylinder override
Mechanical Options
• Not Field Reversible
• EU - Comes standard as D Trim,
with S style Lever and Fail Secure
(FSE), for use with Detex wide
stile (10 Series) Rim or (20 Series)
Surface Vertical Rod Device
• EU x DT or DU - Comes with T
style or U style lever, for use with
Detex wide stile (10 Series) Rim
or (20 Series) Surface Vertical Rod
Device
• EUV x DT or DU - Comes with T
style or U style lever, for use with
Detex wide stile (70/71, 80/81,
82/83 Series) Concealed Vertical
Rod Device
Electrical Options
• Fail Secure (FSE) - During power
failure, device will be locked
(Security option)
ex: EU x FSE x DU
• Fail Safe (FSA) - During power
failure, the trim will always be
unlocked. (Life Safety option)
ex: EU x FSA x DM
• Not Field Selectable
• Not Field Selectable
• EU x DMT or DMU - Comes with
T style or U style lever, for use
with Detex (30 Series) Mortise
Exit Device
Lever Options
S Lever
T Lever
U Lever
Accessories
• MC65 - Mortise Cylinder
• IC7 - 7-pin Mortise Cylinder
Housing (Core not included)
• 80-800 - 24 VDC power supply
with battery charging circuit
• CCL - Long cyllinder collar (11/16”)
• SE-2 - Shaft extension for 2 to
2 1/2” thick doors
• 90-800 - 24 VDC power supply
without battery charging circuit
Finishes
605 / US3
606 / US4
611 / US9
Polished Brass
Brushed Brass
Polished Bronze
612 / US10 Brushed Bronze
613 / US10B Oil Rubbed Bronze
629 / US32
Technical Information
Dimensions
Detex Limited Warranty
• 24VDC / 150ma continuous duty
Front View
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Side View
10 Year Mechanical/3 Year Electrical
Limited Manufacturer’s Warranty
Wiring Diagram
+24VDC
-24VDC
NC for FSA
NO for FSE
+
_
Listings and Approvals
Back View
MIL-STD 810F (G), Method 509.4
(Salt Fog Test)
MIL-STD 810F (G), Method 506.4
(Driving Rain), Procedure 1
4 Posts
7
UL1034
- 33 Temperature
TemperatureSection
Section
UL 1034-34
34 33
[Temperature Range -31° F (-35° C) to
150° F (+66° C)]
UL1034
- 53 Dust
DustSection
Section
UL 1034-54
54 53
1-3/8
October 18, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EU2W
ELECTRIC UNLOCK TRIM - for use with 40/50/51/V40/V50/V51 Series Exit Device
Provides remote means of locking or unlocking a door for authorized entry, access control, security
or safety needs when used in conjunction with any Detex 40/V40 Series rim or 50/51/V50/V51 Series
surface vertical rod exit device on doors with a minimum stile width of 4”. Excellent source of security
for access control systems used in installations in schools, universities, hospitals, retail, industrial, etc.
FSE/FSA
Benefits
• Clutching trim limits vandalism
• Key override for emergency
entrance during loss of power
(FSE)
Features
• Cylinder override
• Spring loaded tailpiece
Mechanical Options
• Not Field Reversible
• EU2W - Comes standard as
D Trim, with S style Lever and
Fail Secure (FSE), for use with
Detex 40/V40 Series Rim or
50/51/V50/V51 Series Surface
Vertical Rod Device
• EU2W x DT or DU - Comes
with T style or U style lever, for
use with Detex 40/V40 Series
Rim or 50/51/V50/V51 Series
Surface Vertical Rod Device
Electrical Options
• Fail Secure (FSE) - During power
failure, device will be locked
(Security option)
ex: EU x FSE
• Fail Safe (FSA) - During power
failure, the trim will always be
unlocked. (Life Safety option)
ex: EU x FSA
• Not Field Selectable
• Not Field Selectable
• Vandal resistant break-away type
lever
Lever Options
S Lever
T Lever
U Lever
Accessories
• MC65 - Mortise Cylinder
• IC7 - 7-pin Mortise Cylinder
Housing (Core not included)
• 80-800 - 24 VDC power supply
with battery charging circuit
• 90-800 - 24 VDC power supply
without battery charging circuit
• CCL - Long cyllinder collar (11/16”)
• SE-2 - Shaft extension for 2 to
2 1/2” thick doors
Finishes
605 / US3
606 / US4
611 / US9
Polished Brass
Brushed Brass
Polished Bronze
612 / US10 Brushed Bronze
613 / US10B Oil Rubbed Bronze
629 / US32
Technical Information
Dimensions
Detex Limited Warranty
• 24VDC / 150ma continuous duty
Front View
Side View
Wiring Diagram
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
10 Year Mechanical/3 Year Electrical
Limited Manufacturer’s Warranty
NC for FSA
+24VDC
NO for FSE
-24VDC
+
_
Listings and Approvals
Back View
MIL-STD 810F (G), Method 509.4
(Salt Fog Test)
MIL-STD 810F (G), Method 506.4
(Driving Rain), Procedure 1
UL1034 - 34 Temperature Section 34
[Temperature Range -31° F (-35° C) to
150° F (+66° C)]
UL1034 - 54
Dust
November 1, 2012
Section 54
2 Posts
7
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Electric Unlock (EU)
* EU = Electric Unlock
EU2W = Electric Unlock (for use
with 40 Series and V40)
605
606
611
612
613
625
* 626
* D
** DM = Mortise
HOW TO ORDER
* BP1
BP2 = For 40 Series and
V40 (EU2W only)
**BP9 = For Mortise only
***
Electric Trim x Electric Function x Trim x Lever x Finish x Cylinder x Backplate x Handing
FSE = Fail Secure
FSA = Fail Safe
*S
T
U
MC65 = Mortise
IC7 = 7 Pin Interchangeable
Core cylinder housing
* RHR = Right Hand Reverse
LHR = Left Hand Reverse
NOTE: * = default
** = for mortise only
*** = all other BPs also available
Examples: 10EU (includes - 10 Series, 08 trim function, D type trim, S lever, Fail Secure, 626 finish, RHR)
10EU x FSA (includes - 10 Series, 09 trim function, D type trim, S lever, Fail Safe, 626 finish, RHR)
30EU x FSA x DMT x 605 x LHR (includes - 30 Series, 09 trim function, DM type trim, T lever, Fail Safe, 605 finish, LHR)
V40EU2W x MC65 (includes V40 Series, 08 trim function, D type trim, S lever, Fail Secure, MC65, 626 finish, RHR)
March 6, 2012
®
Surface Mounted Wiring Options
Magnetic Locks & Accessories
AL18
ML-1548 - Magnetic Lock
Armored Loop with billet
aluminum end. 18” long
• 1,500 pounds holding force
• 12/24 VDC field selectable
FC
As a suffix when ordered with
device, it provides 36” flex
conduit without wires and with
standard conduit connector
• Easy installation features
convenient plug-in wiring
terminals and wire access
cover
• Adjustable mounting bracket
• Surge protection
• No residual magnetism
FCA
Ordered separately from
device, it provides 36” flex
conduit without wires and with
standard conduit connectors
and modified device end-cap
• U.L. Listed
Specify: ML-1548-628 - Anodized Clear
Aluminum
ML-1548-711 - Anodized Black
Aluminum
JB1
Junction Box and 9’ cable
for use with magnetic lock
on EM device
PT5
Power Transfer
Door Signs
EA-561 Adhesive Back “Emergency Exit Only - Alarm
Will Sound”
ECL-365 Adhesive Back “Keep Pushing Door Will Open
in 15 Seconds”
AB02 Angle Bracket - Provides easy
mounting of ML-1548 to narrow frame reveal
Filler Brackets for gap caused by frame stop
conditions.
FB02 3/8” x 3/4” filler bracket
FB04 5/8” x 3/4” filler bracket
®
List of Accessories
Strikes
Through Bolt Mounting Plate
Cylinders
Cylinder Collars
Cylinder Bracket Kit
Sex Nut Kits
Security Screw Kits
Glass Bead Kits
Tools
Slide-In Filler Kits
ER Retrofit Kit
Dummy Exit Device
Accessories
®
Accessories
Strikes
All required strikes are provided with exit devices. Replacement strikes are available as follows:
99 Surface - non-roller strike for
10/40 Series Rim Devices
98 Semi-Mortise - applied strike for
10/40 Series Rim Devices
97 Top Surface - non-roller top
strike for 20/21 Series Surface
Vertical Rod Devices
96 Top Surface - non-roller top
strike for 50/51 Series Surface
Vertical Rod Devices
90 Standard ANSI Strike - for 30
Series Mortise Device
91 ANSI Flat Lip Strike - for 30
Series Mortise Device
92 Double Door Strike with short
open back - for 30 Series Mortise
device
93 Double Door Strike with long
open back - for 30 Series Mortise
Device
95T Top Strike - for
60/61/62/63/70/71/80/81/82/83
Series Concealed Vertical Rod
Devices
95B Bottom Strike - for
60/62/70/80/82 Series Concealed
Vertical Rod Devices
94 Double Door Strike - for 10/40
Series Rim Devices
96/97 Bottom Dust Proof Strike for 20 Series (97 Bottom) or 50
Series (96 Bottom) Surface Vertical
Rod Devices
Through Bolt Mounting Plate Kit for SVR
TMP2 shown
TMP1 (Top Rod Only) / TMP2 (Top
and Bottom Rod) - Through Bolt
Mounting Plate Kit for use when
replacing surface vertical rods on
doors that are damaged or to cover
existing exterior holes from previous
device.
Kit is standard with two 630 finish
plates and four 1/4-20 sex bolts.
Contact factory for other finishes.
Where Trust is Built
Life Safety and Security Door Hardware
Cylinders
MC65 Mortise Cylinder - 1-1/8"
6-pin, keyed 5-pin. Available
keyed alike or keyed differently.
Finishes available: 605, 606, 612,
613, 626
RC65 Rim Cylinder - 6-pin, keyed
5-pin. Available keyed alike or
keyed differently.
Finishes available: 605, 606, 612,
613, 626
Cylinder Collars
Cylinder Bracket Kit
Cylinder Collars for 5 and 6 pin
cylinders are provided with all
outside trim.
CCS 7/16" Short Cylinder Collar Cylinder collar for 5 and 6 pin cylinders. Finishes available: 605, 606,
612, 613, 626
CCL 11/16" Long Cylinder Collar Cylinder collar for 7 pin interchangeable core cylinders. Finishes available: 605, 606, 612, 613, 626
CBK - Cylinder Bracket Kit consists
of bracket and adjustable tailpiece
assembly for rim cylinder used with
other manufacturer's outside trim
Sex Nut Kit
SN1 - Sex Nut Kit 1/4-20 — 2 per
package
SN2 - Sex Nut Kit 10-32 — 2 per
package
Tools
03CAK - Cylinder Bracket Kit (for
60 Series Only) consists of bracket
and adjustable tailpiece assembly
for rim cylinder used with other
manufacturer’s outside trim
Security Screw Kits
Contains an assortment of screw
sizes and types for securing covers
in place
SSK1 - Security Screw Kit for rim
exit device. Includes driver tip.
Stainless Steel only
Glass Bead Kits
IC7 Interchangeable core cylinder
housing - 7-pin, factory installed
SSK2 - Security Screw Kit for SVR
exit device. Includes driver tip.
Stainless steel only
HDK - Hex Dogging Key - Heavyduty with over molded ABS, dogging key is ergonomically designed
to resist repetitive motion injuries.
Driver Tip for Security Screw:
TT10 - 6-32 Undercut FH Screws
TT15 - 8-32 FH Screws
TT25 - 10-32 FH Screws
TT27 - 1/4-20 and #14 Screws
For use on doors with raised glass
beads. Each kit contains one 1/4"
shim set. Specify Kit number
Where Trust is Built
Kit Number
GB1
GB2
GB3
GB4
GB5
GB6
GB7
GB8
October 18, 2012
For use with:
10 Series
40 Series
20 Series - 7 foot
21 Series - 7 foot
50 Series - 7 foot
51 Series - 7 foot
20 Series - 8 foot
21 Series - 8 foot
Kit Number
GB9
GB10
GB11
GB12
GB13
GB14
GB15
GB16
For use with:
50 Series - 8 foot
51 Series - 8 foot
20 Series - 10 foot
21 Series - 10 foot
50 Series - 10 foot
51 Series - 10 foot
V40 Series
30 Series
Life Safety and Security Door Hardware
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
Accessories
Slide-In Filler Kits
Slide-In Filler Kits allow change or addition to the device after initial installation. Specify device series (10, 20, 21,
30, 40, 50, 51, 60, 61, 62, 63, 70, 71, 80, 81, 82, or 83), size (36" or 48") and finish (605, 606, 611, 612, 613, 628,
629, 630, 693 or 695).
Example: 10x36x630
SIF-EA Exit Alarm - Slide-In Filler Kit provides 100 plus decibel directional piezo alarm with remote signal relay,
remote bypass relay, and LED display. Optional Cylinder Dogging for non-fire rated devices. 9 volt DC and
12/24 volt AC/DC operation. Options include Key Stop feature that allows key to be removed only if unit is armed
and factory installed cylinder housing for 7-pin IC cylinders.. Requires mortise cylinder with standard Yale cam
(sold separate)
SIF-HD - Hex Key Dogging Slide-In
Filler Kit includes dogging key with
over-molded ergonomic grip
SIF-CD - Cylinder Dogging Slide-In
Filler Kit requires mortise cylinder
with standard Yale cam (sold
separate). Optional factory installed
cylinder housing for 7-pin IC
cylinders.
SIF-LD - Less Dogging Slide-In
Filler Kit's smooth plate eliminates
dogging feature. Mandatory for all
fire rated models.
ER Retrofit Kit
Converts any Advantex 10, 20, 21, 30, 40, 50 and 51 Series exit device from a simple mechanical device to the
ER Electric Latch Retraction Device. The retrofit kit consists of the pushpad assembly, the ER module assembly,
required hardware and complete instruction for conversions in the field. Specify 36" or 48". Requires power
supply, sold separate. Call factory for more information.
November 1, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
Accessories
Dummy Exit Devices
The Advantex Series of non-locking or dummy exit devices are designed for use on all types of doors
where locking is not required. Utilizing the same extruded aluminum base-plate and stainless steel
wraps, these devices are able to complete your specification where non-locking interior doors are
required.
00/05 Standard Dummy Device with two end-caps
The standard 00 device consists of no moving parts. With two standard Advantex end-caps, this
inactive device is easy to install and is available in all finishes. The 05 device is the same but with an
extended base-plate for narrow stile doors.
01/04 Standard Dummy Device with head cover and end-cap
The 01 for wide stile and 04 for narrow stile devices consists of a moving pushpad but no latch bolt.
Provides the look of the standard 10 exit device for wide stile doors when matching devices in a
grouping is important. The pushpad can be equipped with an EX or EXW switch for remote monitoring
purposes.
October 18, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
Technical Information
Technical Information Contents
Cylinder Requirements
Mortise Cylinder Lengths
Cylinder Collars
Fasteners
Security Screws
Sex Bolts
10 Series Rim Mounting Plate Retrofit Chart
Compatibility With Access Control Entry Trims
Installation
Handing
Minimum Door Widths Chart
®
Technical Information
Cylinder Requirements
Product
Rim Cylinder
Mortise Cylinder
All Use Standard (Yale) Cam
Cylinder Dogging
X
Electrified Options
EA, EI, EM
X
All 03 Function Trims
X
X
All 08 & 09 Function Trims
08 & 09 Function Detail
03 Function Detail
All Advantex 03 Function outside trims are supplied with
a self-adjusting tailpiece that correctly fits into the cam on
the mounting plate.
Tailpiece Used
Door Thickness
1-3/4" and 2" Thick Doors
Lever trims come with the adjustable tailpiece which
is attached to the escutcheon.
2-1/4" Thick Doors
Cylinder Collars
Rim cylinder tailpieces are cut to fit into this tailpiece
making the cut less critical.
Mortise Cylinder Length
The cylinder assembly in the slide-in filler used for both
the cylinder dogging and electrified options aresupplied
with shims to accommodate cylinder lengths from 7/8 to
1-1/4
Mortise cylinder
See Accessories for Cylinder Collar lengths.
Technical Information
®
Fasteners
Door manufacturer should be consulted for proper mounting fasteners. #14 x 1-1/4 PPH sheet metal screws and
1/4-20x 1” PHP machine screws are furnished standard on all devices and strikes. Fasteners of proper length for
door thickness are furnished with devices where trims are through bolted. C and CN Pull trims are furnished with
1/4-20 through bolt for attaching bottom of pull handle.
Security Screws
For added security, pin head screws are available in two different kits.
SSK1
Security Screw Kit for Rim Devices Contains:
2 MS 10/32, FH, Undercut
4 MS 6/32 FH
2 MS 1/4-20 BH
2 SMS #14 x 1” BH Type AB
4 Tamper Bits required for above
SSK2
Security Screw Kit for Surface Vertical Rod Devices Contains:
6 MS 6-32 x 1/4” FH Undercut
2 MS 8-32 FH Undercut
2 MS 10-32 FH, Undercut
2 MS 1/4-20 BH
2 MS #14 x 1” BH Type AB
4 Tamper Bits required for above
Sex Bolts
If sex bolts are required, see chart below for quantity required for each device.
SN1 kit contains 2 each 1/4-20 bolts. Specify finish.
Function
or Trim
Rim
Devices
Surface Vertical Rod
Devices
Surface Vertical Rod
Top Rod Only
Devices
10
Series
40
Series
20
Series
50
Series
21
Series
51
Series
01
6
4
10
8
6
4
02, 03
2
2
6
6
4
4
08, 09
& 14
2
2
6
6
4
4
Technical Information
®
Wide Stile Mounting Plates
Mounting Plate
10 Series Functions
20/21 Series Functions
BP1
01, 02, 08, 09, 14
01, 02, 08, 09, 14
BP3
01, 02, 08, 09, 14
Not available
BP5
01, 02, 08, 09, 14
Not available
BP7
03 only
03 only
Mounting Plate
V40 Series Functions
V50/51 Series Functions
BP2
01, 02, 08, 09, 14
BP8
03 only
Narrow Stile Mounting Plates
10 Series
Advantex Rim Mounting Plate Retrofit Chart
Detex
Von Duprin
BP-1*
98/99
BP-3
Sargent
Precision
8800
(See Note)
2100
(See Note)
BP-5
Yale
Corbin
Russwin
7100
ED5200
NOTE: BACKPLATE HOLE ALIGNMENT MAY BE OFF BY UP TO 1/16TH”
Advantex mounting plates BP-1, BP-3 and BP-5 are for use with 10 series rim device.
Advantex mounting plates offer the ability of retrofitting the rim device using the existing door preps of the
manufacturers listed above.
*Shipped standard with 10 device
®
Technical Information
Hardware Templates
Installation
See Detex Template Policy in General Information
The patented Advantex mounting plate and strike
locator system allows:
Compatibility with Access Control
Entry Trims
Advantex will operate with the following entry trims:
Marks iQue series
Omni-Lock
Onity
Kaba Access Controls
Handing
• Quick and easy installation by one person
• No paper templates
• Accurate backset every time
• Square up to door and frame made easy
®
Technical Information
MINIMUM DOOR WIDTHS
**DOOR SHOWN WITH 1/8” CLEARANCE FOR END CAP, SOME WEATHERSTRIP
REQUIRES ADDITIONAL CLEARANCE. ADDITIONAL CLEARANCE WILL REQUIRE
WIDER DOORS.
Charts are based upon 5/8” frame stop, 1/8” door/frame gap, and standard device strike (see notes)
ADVANTEX 10 SERIES - WIDE STILE RIM (99 STRIKE)
“X” dimension
DEVICE
CONFIGURATION
3-0 DEVICE
4-0 DEVICE
EA
33”
39”
EI
33”
39”
EM
34-3/4”
40-3/4”
EE
34-3/4”
40-34”
EExER
34-3/4”
40-3/4”
ED
34-1/8”
40-1/8”
ER
34-3/4”
40-3/4”
ES
33”
39”
EX
29”
35”
CD
29”
35”
HD
29
35”
LD
28-3/8”
34-3/8”
1) For single door frames with no stop, subtract 1-1/4 from minimum door width
2) For Mullion application add 3/8” to each width
3) Standard strike for 10 Series is 99 Strike
®
Technical Information
MINIMUM DOOR WIDTHS CONT’D
ADVANTEX 40 SERIES -NARROW STILE RIM (98 STRIKE w/o STOPS)
“X” dimension
DEVICE
CONFIGURATION
3-0 DEVICE
4-0 DEVICE
EA
31-7/8”
37-7/8”
EI
31-7/8”
37-7/8”
EM
34”
40”
EE
34”
40”
ED
33-3/8”
39-3/8”
ER
34
40
ES
31-7/8”
37-7/8”
EX
27-7/8”
33-7/8”
CD
27-7/8”
33-7/8”
HD
27-7/8”
33-7/8”
LD
27-1/4”
33-1/4”
1) For single door frames with 5/8” stops, add 1-1/4” from minimum door width
2) For Mullion application add 3/8” to each door width
3) Standard strike for 40 Series is 98 strike with 5/8 stop, backset is 2-1/4”
4) Standard strike for 40 Series is 98 strike with no stop, backset is 1-1/8”
ADVANTEX 20/21 SERIES - WIDE STILE SVR, BACKSET IS 2-3/4”
“X” dimension
DEVICE
CONFIGURATION
3-0 DEVICE
4-0 DEVICE
EA
33”
39”
EI
33”
39”
EE
34-3/4”
40-3/4”
ED
34-1/8”
40-1/8”
ER
34-3/4”
40-3/4”
ES
33”
39”
EX
29”
35”
CD
29”
35”
HD
29”
35”
LD
28-3/8”
34-3/8”
1) For double door frames without stops, subtract 5/8” from minimum door width
2) For backset = 2”, subtract 3/4” from minimum door width
®
Technical Information
MINIMUM DOOR WIDTHS CONT’D
ADVANTEX 50/51 SERIES - NARROW STILE SVR w/o STOPS, BACKSET IS 1-1/8”
“X” dimension
DEVICE
CONFIGURATION
3-0 DEVICE
4-0 DEVICE
EA
31-3/8”
37-3/8”
EI
31-3/8”
37-3/8”
EE
33-1/8”
39-1/8”
ED
32-1/2”
38-1/2”
ER
33-1/8”
39-1/8”
ES
31-3/8”
37-3/8”
EX
27-3/8”
33-3/8”
CD
27-3/8”
33-3/8”
HD
27-3/8”
33-3/8”
LD
26-3/4”
32-3/4”
1) For double door frames without stops, add 5/8” to minimum door width
ADVANTEX 30 SERIES - WIDE STILE MORTISE
“X” dimension
DEVICE
CONFIGURATION
3-0 DEVICE
4-0 DEVICE
EA
33”
39”
EI
33”
39”
EE
34-3/4”
40-3/4”
ED
34-1/8”
40-1/8”
ER
34-3/4”
40-3/4”
ES
33”
39”
EX
29”
35”
CD
29”
35”
HD
29”
35”
LD
28-3/8”
34-3/8”
1) For double door frames without stops, subtract 5/8” from minimum door width
General Information
Value Series® Performance Specification
General
All exit devices shall be Value Series® V40 series
rim devices or V50/V51 series surface vertical rod
devices as manufactured by Detex Corporation,
New Braunfels, TX, USA. Each exit device shall be
equipped and installed with a patented mounting
plate and strike locator for an accurate installation.
All devices shall be available with outside trim. All
devices shall be non-handed and field sizeable.
Code Compliance
The exit devices shall be listed by Underwriters
Laboratories and bear the UL label for panic hardware
in compliance with NFPA 80 and 101. Where required,
all devices shall have a UL label for Fire Exit Devices
listed for use on fire rated doors up to and including
A label, three hours. UL labeled Fire Exit Devices
shall be listed for door opening sizes up to 4’0” x 10’0”
on single doors and 8’0” x 8’0” on door pairs with an
F90KR Keyed Removable Mullion.
Where required, all rim devices shall have a MiamiDade County, Florida label indicating hurricane listing.
All exit devices shall be certified to meet ANSI/BHMA
requirements, and conform to ADA and California
Title 19 requirements.
Design
All exit devices shall be of impact resistant ABS
and a structurally engineered extruded aluminum
body. The end cap shall be designed with a tapered
angle of 38 degrees to deflect damage away from
the device. All exit devices shall be designed with
base plate-mounted pushpads and internally ribbed
aluminum extrusion rails to dissipate excessive force
to the pushpad and prevent damage to the operating
mechanisms.
All latch bolts shall be stainless steel material with a
deadlocking feature for increased security.
Hex key dogging shall be a standard feature for all
non-fire rated exit devices. Optional features include
cylinder dogging or less dogging. All dogging will be
accomplished with no more than a one-eighth turn
of the hex key or cylinder key to minimize the risk of
repetitive motion injuries.
The through-bolted modular design of all exit devices
shall accommodate a variety of different trims and
functions without altering the exit device. It shall not
be necessary to remove the device from the door for
keyed changes or standard maintenance.
Options
Optional slide in filler plates shall be available for all
exit devices to accommodate optional dogging types,
alarm and other electrified features.
Warranty
Detex Value Series® panic hardware, when properly
installed, used and maintained, is warranted to be
free of defects in material and workmanship. We
will, for a period of ten (10) years from the date of
purchase, repair or replace any part which, upon our
examination, proves to be defective under normal
use. Electrical components, when properly installed,
used and maintained, are warranted to be free of
defects in material and workmanship for a period of
three (3) year. This warranty will be honored only
upon presentation of proof that the product covered
thereby was purchased directly from an authorized
Detex distributor. We shall not be liable for any direct,
incidental or consequential loss or damage arising
out of the failure of this panic hardware to operate.
V40
03A
NOTE: * = default
Contact factory for availability
of combined options
RHR
LD
ELECTRIFIED FUNCTION
“__”
= No elec. option
EB
= Elec. Alarm with battery
EBxW = Elec. Alarm with battery
weatherized
ED
= Elec. Dogging (V40 Series
only)
EE
= Delayed Egress (V40 Series
only)
EH
= Elec. Alarm hardwired
EHxR = Elec. Alarm hardwired with
Relay
EI
= Elec. Integration
(V40 Series only)
EM
= Egress w/Maglock elec.
delayed (V40 Series only)
ER
= Elec. Latch Retraction
ES
= Elec. Switching
(V40 Series only)
EX
= Request to Exit Signal
EXV
= Request to Exit Signal High Voltage
EXxW = Request to Exit Signal
Weatherized
EXVxW = Request to Exit Signal
Weatherized - High Voltage
EBxKS
DEVICE FINISH
628 = Aluminum *
711 = Black
628
99
36”
84”
DOOR WIDTH/DEVICE LENGTH
36” wide door (3’) *
48” wide door (4’)
NOTE: Optional 2, 10 or 20 minute auto rearm available with
EB, EBxW, EH & EHxR (Alarm resets after programmed time)
September 1, 2011
DOOR HEIGHT/SVR HEIGHT
84” = high door
96” = high door
120” = high door
SN1
SN1 = Sex nut kit
(2 per kit)
NS = Narrow stile for 2”
narrow stile glass door
applications
RC = Rod covers (630
brushed stainless)
BG = Bottom bolt and 12”
ADA ramped cover
(630 burshed stainless)
STRIKES
94 = Double door strike kit
96 = Surface non-roller (V50/V51 Series)
96B = Dust proof (V50/V51 Series)
98 = Semi-mortise
99 = Surface
C65
ELECTRIC OPTIONS
KS = Key Stop (Available with
EB, EBXW, EE, EH,
EHxR, EI, EM functions only)
1
= One second arming delay
(Available as EB1, EB1xW,
EH1, EH1xR, EE1 & EM1)
IN = 220-24VAC Transformer
(Available with ED, EH,
EHxR functions only)
30 = 30 Second Delayed Egress
(Available with EE, EM
functions only)
FC = End Cap with Flex Conduit
(Standard with EH, EHxR,
EE, EM)
LBM = Latch Bolt Monitoring
(Standard with EE & EM,
Available with EB, EH,
EHxR functions only)
L9 = Less 9 volt Battery
(Available with EH & EE only)
SI = Status LED’s ON
(Available with EH & EE only)
277 = 277 volt Input
(Available with EH & EE only)
BLK
CYLINDERS INSTALLED
C65 = 5 pin cylinder installed
IC7 = 7 pin IC housing installed
Contact Factory for additional languages
PUSH PAD
BLK = Black Push Pad (Standard on all
VS except EB, EBxW, EE, EH,
EHxR, EI & EM
RWE = Red Push Pad White English
DOGGING FUNCTION
LD = Less dogging
HD = Hex dogging
CD = Cylinder dogging
DOOR HANDING
RHR = Right hand reverse *
LHR = Left hand reverse
628
OUTSIDE TRIM FUNCTION
01P = Cover Plate
01PN = Cover Narrow Plate
02A = Dummy Pull
02AN = Dummy Narrow Pull
02WP = Dummy Wire Pull
03A = Keyed Pull
03AN = Keyed Narrow Pull
03P = Keyed Pull
03PN = Keyed Narrow Pull
03WS = Keyed Cylinder Trim
08BN = Key locks & unlocks Lever Trim
09BN = Key unlocks Lever Trim
14BN = Lever always active
EU2W = Electric Unlock Trim BP2 Mounting Plate
(Fail Safe / Fail Secure)
FIRE RATING
“F” = Fire rated
“__” = Non-fire
rated *
F
Example Order Number
SERIES TYPE
V40
= Rim device, wide
stile
V40xW = Weatherized Rim
device, wide stile
HV40 = Rim device, wide
stile, hurricane rated
V50
= Surface Vertical Rod
V51
= Surface Vertical
Rod, top rod only
OUTSIDE TRIM FINISH
628 = Aluminum * - P & PN
689 = Powder coated aluminum A, AN & BN
693 = Powder coated black - A,
AN & BN
626 = Brushed Chrome - WS
711 = Black anodized aluminum P & PN
HOW TO ORDER
Rim Exit Devices
Exit Device Types
V40 Series - Rim Exit Device
V40xW Series - Weatherized Rim Exit Device
V50 Series - Surface Vertical Rod Device
V50xW Series - Weatherized Surface Vertical Road Device
V51 Series - Surface Vertical Rod Device - Top Rod Only
V51xW Series - Weatherized Surface Vertical Rod - Top Rod Only
Rim Exit Device
The V40 Series rim exit device is secure and durable panic and fire exit hardware at an economical
price. It is designed for use on all types of single and double doors with mullions. The patented
mounting plate and strike locator system ensures the easiest and most accurate installation of panic
hardware available.
V40
V40
(628 Finish)
(711 Finish)
Standard V40 Rim Device accommodates wide stile doors, 3” or greater stile, and
flush doors. For Narrow Stile doors, 2” to 2 1/2” stiles, specify V40 NS model which
provides a 2” longer device and a lower profile strike.
Benefits
• Priced to be the best value for
durable and attractive loss
prevention panic hardware
• Fast and easy installation
• Minimal door prep saves time and
money
• Fits almost any door in any décor
• Outside trims are easily changed
or rekeyed without removing
device from door
Features
• Patented mounting plate and
strike locator
• Covers a 161 door prep
• Stainless steel, 3/4" deadlocking
Pullman-type latch bolt
• Non-handed
• Field sizeable
• 1/8 turn hex key dogging
• Heavy-duty angled end cap
• Heavy-duty ribbed aluminum rail
extrusion
• High impact ABS and anodized
surfaces
• Withstands over 1400 pounds of
static pull force for greater security
• Modular design accepts a variety
of outside trims and functions
• Standard and narrow stile pull
trims available
Mechanical Options
• CD - Cylinder Dogging
• F - 3-Hour Fire Rated
• 98 - Semi Mortise Strike
• HD - Hex Dogging (Std.)
• H - Hurricane Rated
• Available with 628 Base Rail
Extrusion (Std.)
• LD - Less Dogging
• 36 - Fits 36" Door Width (Std.)
• 48 - Fits 48" Door Width
• NS - Narrow stile door option
• 99 - Surface Strike (Std.)
• Available with 711 Base Rail
Extrusion
Electrical Options
• Exit Alarm with 9 volt Battery (EB)
• Weatherized Exit Alarm (EBxW)
• Electric Dogging (ED)
• Exit Alarm with Remote Signal
(EHxR)
• Electric Integration (EI)
• Delayed Egress (EE)
• Delayed Egress with Magnetic
Lock (EM)
• Exit Alarm Hardwired 24VAC (EH)
• Electric Latch Retraction (ER)
• Electric Switching (ES)
• Request to Exit (EX)
• Weatherized Request to Exit
(EXxW)
Accessories
• SN1 - Sex Nut Fasteners
• GB2 - Glass Bead Kit
• NSK- Narrow Kit - for 2"
narrow stile glass door applications
that must be added in the field
• Outside Trim (see Value Series
Trim Options)
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Stile - Fits 2-1/2" stile doors
with 99 surface strike (Std.)
• Machine and Self-Drilling Screws
(Std.)
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Door Stile - Fits 2" narrow stile
doors - specify NS
• Optional Sex Nuts or Security
Torx Screws available
Listings and Approvals
UL Listed
Panic Hardware
Dimensions
3 1/4” EXTENDED
1 3/4”
Device
8 3/8”
18 1/8”
24 1/8”
LISTED
2 1/2” DEPRESSED
LISTED
2 3/8”
2 3/8”
32 7/8”
44 7/8”
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR keyed removable Mullion
Meets ADA requirements
UBC 97, Standard 7-2 and
18 1/8” & 32 7/8” device dimensions for 36” door
UL10C for positive pressure
24 1/8” & 44 7/8” device dimensions for 48” door
ANSI/BHMA certified A156.3
Add 2” for NS
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval
FL9052
California State Fire Marshall -
Single Door
with
99 strike
4140-0127:105 and 3725-0127:108
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
Single
Narrow
Stile Door
with 98 strike
Door
Double Doors
Door
Device
Device
Mullion
October 18, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
V40 x W
Weatherized Rim Exit Device
The V40 Series rim exit device is secure and durable panic and fire exit hardware at an economical
price. It is designed for use on all types of single and double doors and gates with mullions that are or
may be exposed to the weather. The patented mounting plate and strike locator system ensures the
easiest and most accurate installation of panic hardware available. In addition to listing as UL panic and
fire exit hardware device, this device conforms to UL1034-34 Temperature Section 34 , UL1034-54 Dust Section
54, MIL-STD 810F, Method 506.4 (driving rain test); MIL-STD 810F, Method 509.4 (salt fog test) and UBC standard
7-2 (positive pressure).
Benefits
V40
V40
(628 Finish)
(711 Finish)
Standard V40 Rim Device accommodates wide stile doors, 3” or greater stile, and
flush doors. For Narrow Stile doors, 2” to 2 1/2” stiles, specify V40 NS model which
provides a 2” longer device and a lower profile strike.
• Priced to be the best value for
durable and attractive loss
prevention panic hardware
• Fast and easy installation
• Minimal door prep saves time and
money
• Fits almost any door in any décor
• Outside trims are easily changed
or rekeyed without removing
device from door
Features
• Patented mounting plate and
strike locator
• Covers a 161 door prep
• Stainless steel, 3/4" deadlocking
Pullman-type latch bolt
• Non-handed
• Field sizeable
• 1/8 turn hex key dogging
• Heavy-duty angled end cap
• Heavy-duty ribbed aluminum rail
extrusion
• High impact ABS and anodized
surfaces
• Withstands over 1400 pounds of
static pull force for greater security
• Modular design accepts a variety
of outside trims and functions
• Standard and narrow stile pull
trims available
Mechanical Options
• CD - Cylinder Dogging
• F - 3-Hour Fire Rated
• 98 - Semi Mortise Strike
• HD - Hex Dogging (Std.)
• H - Hurricane Rated
• Available with 628 Base Rail
Extrusion (Std.)
• LD - Less Dogging
• 36 - Fits 36" Door Width (Std.)
• 48 - Fits 48" Door Width
• NS - Narrow stile door option
• 99 - Surface Strike (Std.)
Electrical Options
• Weatherized Exit Alarm (EBxW)
• Weatherized Request to Exit
(EXxW)
• Weatherized Request to Exit High
Voltage (EXVxW)
Refer to Electrified Options section
for more information
• Available with 711 Base Rail
Extrusion
Accessories
• SN1 - Sex Nut Fasteners
• GB2 - Glass Bead Kit
• NSK- Narrow Kit - for 2"
narrow stile glass door applications
that must be added in the field
Technical Information
• GTPLV40 - Adjustable Gate Plate
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Machine and Self-Drilling Screws
(Std.)
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Recommended Plate Size
• Door Stile - Fits 2-1/2” stile doors
with 99 surface strike (Std.)
Gate - 1/8” thick plate, galvanized,
or painted steel or 1/4” thick alumnum plate, minimum Height - 10”
• Door Stile - Fits 2” narrow stile doors
- specify NS
• Outside Trim (see Value Series
Trim Options)
• Optional Sex Nuts or Security
Torx Screws available
Strike - 1/8” thick plated,
galvanized, painted steel plate,
angle iron, or 1/4” thick aluminum
plate, minimum Height - 5”
Stop - 1/8 thick plated, galvanized,
or painted angle iron or 1/4” thick
aluminum angle plate, minimum
Height - 2”
Dimensions
3 1/4” EXTENDED
1 3/4”
Device
18 1/8”
24 1/8”
2 1/2” DEPRESSED
2 3/8”
2 3/8”
8 3/8”
32 7/8”
44 7/8”
Single Gate Riser
24 1/8” & 44 7/8” device dimensions for 48” door
Add 2” for NS
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
Overhead View
Gate Stop
(see Technical
Information
above)
18 1/8” & 32 7/8” device dimensions for 36” door
Plate for mounting
panic device See Technical
Infomation above
Weld recommended,
machine or sheetmetal
screw mounting allowable.
3/4" Max.
Plate for mounting
strike - See
Technical
Information above
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable Mullion
UL1034 - 34 Temperature Section 34
[Temperature Range -31° F (-35° C) to
150° F (+66° C)]
UL1034 - 54 Dust Section 54
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
October 18, 2012
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval FL9052
California State Fire Marshall 4140-0127:105 & 3725-0127:108
MIL-STD 810F (G), Method 509.4
(Salt Fog Test)
MIL-STD 810F (G), Method 506.4
(Driving Rain), Procedure 1
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
V50/V51 SERIES
Surface Vertical Rod Device
The V50 Series, surface vertical rod exit device
and V51 Series, top rod exit device are heavyduty panic and fire exit hardware for use on
all types of double doors without a mullion. The
patented mounting plate and strike locator system
ensures the easiest and most accurate installation
in an economical panic device.
V50
(shown)
ANSI 156.3 - 2001
Grade 1
Type 2
Benefits
• Priced to be the best value for
durable, attractive panic
hardware
V50xRCxBG
(Optional Rod Covers and
Bolt Guard shown)
• Fast and accurate installation
• Fits any door in almost any décor
• Minimal door prep saves time and
money
• Outside trims are easily changed
or rekeyed without removing
device from door
• Patented mounting plate and
strike locator system replaces
paper templates
• Handed, field reversible
• Impact resistant ABS and
anodized surfaces
• Stainless steel 3/4" deadlocking,
Pullman-type top latch bolt
• 1/8 turn dogging
Features
• Bottom drop bolt, 5/8" dia. x
5-5/8" long secures into strike
plate
• Field sizable
• Heavy-duty angled end cap
• Heavy-duty ribbed aluminum rail
extrusion
• Modular design accepts a variety
of outside trims and functions
• Standard and narrow stile pull
trims available
Mechanical Options
• V51 - Top Rod Only
• 84 - Fits 7' Door Height (Std.)
• NS - Fits 2" Narrow stile glass door
• F - 3-Hour Fire Rated
• 96 - Fits 8' Door Height
• 96 Surface top stike top (Std.)
• HD - Hex Dogging (Std.)
• 120 - Fits 10' Door Height
• 96B Bottom dust proof strike
• CD - Cylinder Dogging
• RC - Rod Covers (630 Brushed
Stainless)
• Available with 628 base rail
extrusion
• BG - Bottom bolt and 12" ADA
ramped cover (630 Brushed
Stainless)
• Available with 711 base rail
extrusion
• Electric Hardwired Alarm with
Remote Signal (EHxR)
Refer to Electrified Options section for
more information
• LD - Less Dogging
• 36 - Fits 36" Door Widths (Std.)
• 48 - Fits 48" Door Widths
Electrical Options
• Electric Battery Alarm (EB)
• Delayed Egress (EE)
• Electric Hardwired Alarm (EH)
Accessories
• Outside Trim (see Value Series
Trim Options)
• SN1 - Sex Nut Kit (2 per package)
• GB# - Glass Bead Kits
• NSK - Narrow Kit for 2" narrow
stile glass door applications
Technical Information
• Door Stile - Fits 2-1/2" stile doors
(Std.)
• Door Stile - Fits 2" narrow stile
doors - specify NS
• Fasteners - Machine and SelfDrilling Screws standard
Dimensions
Top
3 1/8” EXTENDED
Bottom
2 3/8” DEPRESSED
18 1/8”
24 1/8”
1 13/16”
2 3/8”
2”
2 3/8”
24 1/8” & 44 7/8”
device dimensions
for 48” door
1 3/4”
6 1/4”
5 1/4”
1 1/2”
8 3/8”
1 13/16”
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
18 1/8” & 32 7/8”
device dimensions
for 36” door
2 7/8”
Add 2” for NS
32 7/8”
44 7/8”
Detex Limited Warranty
10 Year Mechanical/3 year Electrical
Limited Manufacturer's Warranty
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
8'x10' pairs of doors
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
October 18, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
V50xW/V51xW SERIES
Weatherized Surface Vertical Rod Device
The Weatherized V50 Series, surface vertical
rod exit device and V51 Series, top rod exit
device are heavy-duty panic and fire exit
hardware for use on all types of double doors
without a mullion. The patented mounting plate
and strike locator system ensures the easiest and
most accurate installation in an economical panic
device. In addition to listing as UL panic and fire
exit hardware device, this device conforms
to UL1034-34 Temperature Section 34,
UL1034-54 Dust Section 54, MIL-STD
810F, Method 506.4 (driving rain test);
MIL-STD 810F, Method 509.4 (salt fog test)
and UBC standard 7-2 (positive pressure).
V50
(shown)
V50xRCxBG
(Optional Rod Covers and
Bolt Guard shown)
ANSI 156.3 - 2001
Grade 1
Type 2
Benefits
• Priced to be the best value for
durable, attractive panic
hardware
• Fast and accurate installation
• Fits any door in almost any décor
• Minimal door prep saves time and
money
• Outside trims are easily changed
or rekeyed without removing
device from door
Features
• Patented mounting plate and
strike locator system replaces
paper templates
• Handed, field reversible
• Impact resistant ABS and
anodized surfaces
• Stainless steel 3/4" deadlocking,
Pullman-type top latch bolt
• Bottom drop bolt, 5/8" dia. x
5-5/8" long secures into strike
plate
• Field sizable
• 1/8 turn dogging
• Heavy-duty angled end cap
• Heavy-duty ribbed aluminum rail
extrusion
• Modular design accepts a variety
of outside trims and functions
• Standard and narrow stile pull
trims available
Mechanical Options
• V51 - Top Rod Only
• 84 - Fits 7' Door Height (Std.)
• NS - Fits 2" Narrow stile glass door
• F - 3-Hour Fire Rated
• 96 - Fits 8' Door Height
• 96 Surface top stike top (Std.)
• HD - Hex Dogging (Std.)
• 120 - Fits 10' Door Height
• 96B Bottom dust proof strike
• CD - Cylinder Dogging
• RC - Rod Covers (630 Brushed
Stainless)
• Available with 628 aluminum base
rail extrusion
• BG - Bottom bolt and 12" ADA
ramped cover (630 Brushed
Stainless)
• Available with 711 black base rail
extrusion
• EXVxW - Request to Exit
Weatherized High Current/Voltage
Refer to Electrified Options section for
more information
• LD - Less Dogging
• 36 - Fits 36" Door Widths (Std.)
• 48 - Fits 48" Door Widths
Electrical Options
• EBxW - Exit Alarm 9V Battery
Weatherized
• EXxW - Request to Exit
Weatherized
Accessories
• Outside Trim (see Value Series
Trim Options)
• SN1 - Sex Nut Kit (2 per package)
• GB# - Glass Bead Kits
• NSK - Narrow Kit for 2" narrow
stile glass door applications
Technical Information
• Door Stile - Fits 2-1/2" stile doors
(Std.)
• Door Stile - Fits 2" narrow stile
doors - specify NS
• Fasteners - Machine and SelfDrilling Screws standard
Dimensions
Top
3 1/8” EXTENDED
Bottom
2 3/8” DEPRESSED
18 1/8”
24 1/8”
1 13/16”
2 3/8”
2”
2 3/8”
24 1/8” & 44 7/8”
device dimensions
for 48” door
1 3/4”
6 1/4”
5 1/4”
1 1/2”
8 3/8”
1 13/16”
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
LISTED
LISTED
18 1/8” & 32 7/8”
device dimensions
for 36” door
2 7/8”
Add 2” for NS
32 7/8”
44 7/8”
Detex Limited Warranty
10 Year Mechanical/3 year Electrical
Limited Manufacturer's Warranty
UL Listed Fire Exit Hardware
for 3 hours, maximum
UL Listed
4'x10' single doors and
Panic Hardware
8'x10' pairs of doors
UL1034 - 34 Temperature
UL
Listed Fire Exit Hardware
Section 34 [Temperature Range
Meets
ADA(-35°C)
requirements
for
3 -31°F
hours,
maximum
from
to 150°F
(+66°C)]
4'x10'
single doors and
UL1034
- 54
Dust
Section
54
UBC 97,
Standard
7-2 and
8'x10'
pairs
of doors
UL10C for positive pressure
Meets ADA requirements
ANSI/BHMA certified A156.3
UBC 97, Standard 7-2 and
Meets NFPA
80 & 101
UL10C
for positive
pressure
for Life Safety
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
MIL-STD 810F (G), Method 509.4
(Salt Fog Test)
MIL-STD 810F (G), Method 506.4
(Driving Rain), Procedure 1
October 18, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Outside Trim Designs
BHMA Functions
01 - Exit only, no trim
02 - Entrance by trim when actuating bar is locked down
03 - Entrance by trim when latch bolt is released by key. Key removable only when locked.
08 - Entrance by knob or lever. Key locks or unlocks knob or lever.
09 - Entrance by knob or lever only when released by key. Key removable only when locked.
14 - Entrance by trim when latch bolt is released by knob, lever. Always active, no cylinder.
EU2W - Electric Unlock Trim
OUTSIDE TRIM DESIGNS
Assorted outside trims provide security for all types of installations. Built to be as durable as the
panic devices, these heavy-duty trims will stand up to heavy use and abuse. The versatile design
of the trims, combined with the device mounting plate, makes changing functions as simple as
replacing the outside trim. This can easily be done without removing the exit device from the door.
These trims can be used on V40 Series Rim and V50 Series Surface Vertical Rods. Detex uses
the BHMA functions/descriptions for all trims.
A and AN TRIM
S Pull Standard
NOTE: Available in
689 or 693 finishes
02A
02AN
03A
03AN
Covers 161 Prep
BN, EU2W and MN Trim
S Lever Standard
BN and MN Trim
Available in
689 or 693
finishes
02BN,
14BN
161 Prep Cover
Plate Standard
S Lever
08BN,
09BN
EU2W wide
escutcheon
08MN,
14MN
P and PN Trim
.160
.160
01P
5.00
03PN
5.00
Available in
628 & 711 finishes
2.00
3.50
P Trim covers
161 Prep
03PN
03P
WP Trim
WS Trim
Available in
605, 606, 611,
612, 613, 629
and 630 finishes
1” dia.
03WS
02WP
12”
BHMA Function/Description
• 02 - Entrance by trim when
actuating bar is locked down
(dummy trim)
• 03 - Entrance by trim when latch
bolt is released by key. Key
removable only when locked.
• 08 - Entrance by knob or lever.
Key locks or unlocks knob or lever.
• 09 - Entrance by knob or lever
only when released by key. Key
removable only when locked.
• 14 - Entrance by trim when
latch bolt is released by knob
or lever. Always active, no
cylinder.
Finishes
605 / US3
606 / US4
611 / US9
612 / US10
613 / US10B
Polished Brass
Brushed Brass
Polished Bronze
Brushed Bronze
Oil Rubbed Bronze
Technical Information
• A/AN Trims are Steel Stampings
• BN Trims are Zinc Castings
• P/PN Trims are Aluminum
Stampings
• WS Trims are forged Brass
April 26, 2011
629 / US32
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
689 Aluminum Painted
693 Black Painted
711 Black Anodized
• Value Series trims configured for
use with BP2 and BP8 (standard)
• When ordered with device,
trims will match mounting plate
specified
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Electrified Options
Electrified Options Definitions
V40xEB
Exit Alarm with 9V Battery
V40xEBxW
Exit Alarm with 9V Battery Weatherized - Pushpad Monitor
V40xED
Electric Dogging
V40xEE
Electric Delayed Egress
V40xEH
Exit Alarm with 12VAC Hardwired with 9V Battery Backup
V40xEHxR
Exit Alarm with 12VAC Hardwired with 9V Battery Backup and Remote Signal
V40xEI
Electric Integration - Includes ES Switches, piezo, key switch and 2 LEDs
V40xEM
Electric Delayed Egress with Magnetic Lock
V40xER
Electric Latch Retraction
V40xES
Electric Switching
V40xEX
Request to Exit Signalling
V40xEXxW
Request to Exit Signalling Weatherized
V50xEB
Exit Alarm with 9V Battery
V50xEBxW
Exit Alarm with 9V Battery Weatherized
V50xEE
Electric Delayed Egress
V50xEH
Exit Alarm with 12VAC Hardwired with 9V Battery Backup
V50xEHxR
Exit Alarm with 12VAC Hardwired with Remote Signal and Remote Bypass
V50xER
Electric Latch Retraction
V50xERxW
Weatherized Surface Vertical Rod with Electric Latch Retraction
All Electrified Options are available on Fire Exit Hardware and Hurricane Rated Decives
Alarmed Rim Exit Device (V40xEB/EH)
The V40xEB/EH is designed for primary and secondary exits that require an alarmed panic device.
The 100dB alarm will sound when someone attempts to exit, alerting management to the unauthorized
exit. Available in various configurations, the V40xEB/EH provides security while meeting all life safety
concerns, offering an exceptional value.
V40xEB
(Shown with factory installed mortise
cylinder - sold separate)
V40xEBx711xBLK
(Shown with factory installed mortise
cylinder - sold separate)
V40xEBx711
Wide Stile shown, for Narrow Stile, specify NS Option
(for use on 36” and 48” doors with 2” stiles).
Benefits
• Priced to be the best value for
durable and attractive loss
prevention panic hardware
• Reduces employee and customer
theft
• Fast and easy installation
Features
• V40xEB - Alarmed Exit Device
powered by standard 9-volt
battery
• V40xEH - Alarmed Exit Device
powered by 12V or 24 AC/DC
power, with 9-volt battery backup
(12V AC standard)
• Stainless steel, 3/4" deadlocking
Pullman-type latch bolt
• Secure installation prevents mistakes, enhances security and reduces maintenance
• Durable design provides years of
trouble-free protection, saving on
replacement costs
• Heavy-duty angled end cap
• Heavy-duty ribbed aluminum rail
extrusion
• Accommodates all types of mortise
cylinders with a standard Yale cam
(collar required for 7-pin IC
cylinders)
• 1/8 turn cylinder dogging
• Patented back plate and plastic
strike locator provide paperless
template for perfect alignment with
door and frame
Mechanical Options
• CD - Cylinder Dogging (Std.)
• H - Hurricane Rated
• LD - Less Dogging
• 99 - Surface Strike (Std.)
• 36 - Fits 36" Door Width (Std.)
• 98 - Semi Mortise Strike
• 100 decibel alarm
• 48 - Fits 48" Door Width
• F - 3-Hour Fire Rated
• Available with 628 Base Rail
Extrusion (Std.)
(Shown with factory installed mortise
cylinder - sold separate)
• Fits almost any door in any décor
• Controls foot traffic, deters
unauthorized exits, prevents
loss and meets building code
requirements
• Single mortise cylinder (sold
separate) provides arming and
dogging
• State-of-art electronics
offer reliable security and
instantaneous alarm
• Field selectable key rearm or 2
min. auto rearm
• Visual and audible arming
indicators
• Armed and disarmed field
selectable status indicator
• Available with 711 Base Rail
Extrusion
Electrical Options
• R - Remote Signal (Form C
signaling when alarm sounds)
Other Value Series Alarmed Panic
Devices Include:
• LBM - Latch Bolt Monitoring
• Weatherized Alarmed Device
powered by standard 9-volt battery
(EBxW)
• Delayed Egress (EE)
• Delayed Egress with Magnetic
Lock (EM)
Accessories
• SN1 - Sex Nut Fasteners
• KS - Key Stop - key removed only
when armed
• NSK - Narrow Kit - for 2" narrow
stile glass door applications
• Outside Trim (see Value Series
Trim Options)
• Optional Cylinder Nut Wrench
P/N: 103779
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Machine and Self-Drilling Screws
(Std.)
• Aluminum doors need to be
ordered as a Narrow Stile (NS)
• Door Stile - Fits 2-1/2" stile doors
with 98 semi-mortise strike (Std.)
• Optional Sex Nuts or Security
Torx Screws available
• Door Stile - Fits standard doors
with 99 strike
Dimensions
Riser Diagram
Transformer
3 1/4” EXTENDED
1 3/4”
18 1/8”
24 1/8”
2 1/2” DEPRESSED
2 3/8”
2 3/8”
8 3/8”
32 7/8”
44 7/8”
18 1/8” & 32 7/8” device dimensions for 36” door
24 1/8” & 44 7/8” device dimensions for 48” door
Add 2” for NS
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR keyed removable Mullion
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval FL9052
California State Fire Marshall 4140-0127:105 and 3725-0127:108
October 18, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Weatherized Alarmed Rim Exit Device (V40xEBxW)
The V40xEBxW is designed for doors and gates requiring a stand alone, battery powered, alarmed,
weatherized panic device. The 100dB alarm will sound when someone attempts to exit, alerting
management to the unauthorized exit. The internal alarm with both remote bypass and remote
signaling capabilities is ideal for applications where both security and life safety are a concern. In
addition to listing as UL panic and fire exit hardware device, this device conforms to UL1034-34
Temperature Section 34, UL1034-54 Dust Section 54, MIL-STD 810F, Method 506.4 (driving rain test);
MIL-STD 810F, Method 509.4 (salt fog test) and UBC standard 7-2 (positive pressure).
V40xEBxW
(Shown with mortise cylinder - sold
separately)
V40xEBxWx711xBLK
(Shown with mortise cylinder - sold
separately)
Benefits
• Weather resistant loss
prevention hardware designed
for use in outdoor or wet
environments
• Patented back plate and plastic
strike locator designed for perfect
alignment with door and frame
without paper template
Features
• Powered by standard 9-volt
battery
• Stainless steel, self-latching bolt
• Angled end cap deflects damage
• Tamper-resistant, immersionproof security switches
• Covers a 161 door prep
• Plated steel, anodized aluminum
and ABS components endure
heavy use and exposure to the
elements
Wide Stile shown, for Narrow Stile, specify NS Option
(for use on 36” and 48” doors with 2” stiles).
V40xEBxWx711
(Shown with mortise cylinder - sold
separately)
• Fast, easy, trouble-free installation
prevents costly mistakes and
enhances security
• Rugged, durable, corrosionresistant design reduces
maintenance
• Provides reliable loss prevention
protection 24 hours a day
• Aesthetically pleasing design for
almost any door or gate in any
décor
• Controls foot traffic to deter
unauthorized exits and reduces
employee and customer theft
• Built-in inhibitors prevent ABS
fading and weakening, typically
caused by exposure to extreme
temperatures and UV rays
• 100dB alarm
• Indefinite alarm requiring manual
rearm or variable 2 min. alarm
duration with auto re-arm
• Visual and audible arming
indicators
• Tamper-resistant housing protects
electronics, battery and internal
hardware, preventing manipulation
• Tapered design sheds rainwater
• Visual and audible low battery
alert
• Cylinder dogging standard (can
also be ordered less dogging)
• Armed and disarmed field
selectable status indicator
• CD - Cylinder Dogging (Std.)
• H - Hurricane Rated
• LD - Less Dogging
• 99 - Surface Strike (Std.)
• Available with 711 (Black)
Base Rail Extrusion
• 36 - Fits 36" Door Width (Std.)
• 98 - Semi Mortise Strike
Mechanical Options
• 48 - Fits 48" Door Width
• F - 3-Hour Fire Rated
• Available with 628 Base Rail
Extrusion (Std.)
Electrical Options
• Remote Signal Form C
signaling when alarm sounds and
remote bypass input allows
authorized use without an alarm
- standard feature
Other Weatherized Detex Products
Include:
• Request to Exit Signalling
Weatherized (EXxW)
• GTPLV40 - Adjustable Gate Plate
• Weatherized Delayed Egress
EasyKit (WDEx10)
Accessories
• SN1 - Sex Nut Fasteners
• KS - Key Stop - key removed only
when armed
• NSK - Narrow Kit - for 2" narrow
stile glass door applications
• Outside Trim (see Value Series
Trim Options)
• Optional Cylinder Nut Wrench
P/N: 103779
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass
• Door Stile - Fits standard door
with 99 surface strike (Std.)
• Machine and Self Drilling Screws
(Std.)
• 2” Aluminum doors need to be
ordered as a narrow stile (NS)
• Exceeds MIL810F Method 506.4
Driving Rain (simulating 4"/hr. rain
w/40mph wind)
• Optional Sex Nuts or Security
Torx Screws available
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Door Stile - Fits 2-1/2” stile doors
with 98 semi-mortise strike
Dimensions
• Exceeds MIL810F Method 509.4
Salt Fog Test (simulating effects
of corrosive environments similar
to atmospheric conditions found
in costal regions
Riser Diagram
Remote Signal
Remote Bypass
3 1/4” EXTENDED
1 3/4”
2 1/2” DEPRESSED
18 1/8”
24 1/8”
2 3/8”
2 3/8”
8 3/8”
32 7/8”
44 7/8”
18 1/8” & 32 7/8” device dimensions for 36” door
24 1/8” & 44 7/8” device dimensions for 48” door
Add 2” for NS
Listings and Approvals
UL Listed
Panic Hardware
LISTED
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
UBC 97, Standard 7-2 and
UL10C for positive pressure
UL Listed Fire Exit Hardware
for 3 hours, maximum
LISTED
Detex Limited Warranty
4'x10' single doors and pairs of
4'x8' with F90KR key removable Mullion
UL1034-34 Temperature Section 34
[Temperature Range -31° F (-35° C) to
150° F (+66° C)]
UL1034-54 Dust Section 54
Meets ADA requirements
MIL-STD 810F(G), Method 506.4
(Driving Rain Test)
MIL-STD 810F(G), Method 509.4
(Salt fog Test)
October 18, 2012
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval FL9052
California State Fire Marshall 4140-0127:105 & 3725-0127:108
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Electric Dogging (V40xED)
The V40xED Electric Dogging is designed for entrance and exit doors with panic or fire exit hardware.
When energized, and after a pushpad is depressed, the pushpad and the latch bolt remain retracted,
providing push-pull operation. Relocking all devices is accomplished by using a single switch or
through a fire alarm input.
V40xEDx628
V40xEDx711
Wide Stile shown, for Narrow Stile, specify NS Option
(for use on 36” and 48” doors with 2” stiles).
Benefits
• Priced to be the best value for
durable and attractive panic
hardware
• Pushpad remains depressed
while latch is retracted, preventing
unnecessary cycling, for quieter
operation
• While dogged, pushpad remains
out of the path of egress,
removing the typical catch point
found with other exit devices
• One-touch operation turns any
secured door or group of doors
into push-pull openings and
releases them as required
• Door remains locked until first
activation of pushpad (exit) allows
remote activation of dogging mode
• Allows remote deactivation of
dogging for instantaneous
lockdown mode
• Economical alternative to latch
retraction when only dogging is
required
• Rugged, durable design reduces
maintenance
• Secure installation prevents costly
mistakes and enhances security
• Fits almost any door in any décor
• Simple mounting and wiring provide
quick, trouble-free installation,
saving time and money
Features
• Tamper resistant housing
• Maintained latch and pushpad
retraction
• Operates on 24VAC or 24VDC
• Continuous duty magnet
Mechanical Options
• F - 3-Hour Fire Rated
• 36 - Fits 36" Door Width (Std.)
• H - Hurricane Rated
• 48 - Fits 48" Door Width
• 99 - Surface Strike (Std.)
• 98 - Semi Mortise Strike
• Available with 628 Base Rail
Extrusion (Std.)
• Available with 711 Base Rail
Extrusion
Electrical Options
• EX - Request to Exit Switch
• 80-800 Power Supply - 24VDC
filtered, regulated with fire loop
connection with battery charging
circuit
• PP-5152-2 24VAC transformer
• SN1 - Sex Nut Fasteners
• PT5 - Power Transfer
• FC - Flex Conduit and End Cap
• EWH8-626 - Electric Hinge
• NSK - Narrow Kit - for 2" narrow
stile glass door applications
• 90-800 - 24VDC filtered, regulated
with fire loop connection
Accessories
• Outside Trim (see Value Series
Trim Options)
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Stile - Fits 2" narrow stile
doors - specify NS
• Machine and Self Drilling Screws
(Std.)
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Door Stile - Fits minimum 4-1/8"
with 99 strike
• Optional Sex Nuts or Security
Torx Screws available
• Door Stile - Fits 2-1/2" stile doors
with 99 surface strike (Std.)
Riser Diagram
Dimensions
Power Supply
(sold separately)
EX-Request to
Exit Switch
Output
(optional)
115 VAC
Input
3 1/4” EXTENDED
1 3/4”
8 3/8”
18 1/8”
24 1/8”
2 1/2” DEPRESSED
2 3/8”
2 3/8”
32 7/8”
44 7/8”
18 1/8” & 32 7/8” device dimensions for 36” door
ED ELECTRIC
DOGGING
Activation
Switch
24 1/8” & 44 7/8” device dimensions for 48” door
Add 2” for NS
Listings and Approvals - V40
UL Listed
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable Mullion
Detex Limited Warranty
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
Meets ADA requirements
State of Florida Approval FL9052
UBC 97, Standard 7-2 and
California State Fire Marshall 4140-0127:105 and 3725-0127:108
UL10C for positive pressure
October 19, 2012
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Delayed Egress Rim Exit Device (V40xEE)
The V40xEE, designed for primary and secondary exits, provides a secure 15-second delay and a
100dB alarm when someone attempts to exit. This 15-second delay allows management time to
respond before someone exits and the alarm deters the exit from occurring. Per life safety
requirements, the V40xEE must be provided with a fire alarm input, thus providing a system override
during a fire emergency. The V40xEE provides security while meeting all life safety concerns, offering
an exceptional value.
Power Supply Included as
standard feature
V40xEE
Shown with factory
installed
mortise cylinder
(Shown with mortise cylinder - sold
separately)
V40xEEx711xBLK
(Shown with mortise cylinder - sold
separately)
Wide Stile shown, for Narrow Stile, specify NS Option
(for use on 36” and 48” doors with 2” stiles).
V40xEEx711
(Shown with mortise cylinder - sold
separately)
Benefits
• Priced to be the best value for
durable and attractive delayed
egress panic hardware
• Secure installation prevents
mistakes, enhances security and
reduces maintenance
• Reduces employee and customer
theft
• Durable design provides years of
trouble-free protection, saving on
replacement costs
• Fast and easy installation
• Fits almost any door in any décor
• Controls foot traffic, deters
unauthorized exits, prevents
loss and meets building code
requirements
Features
• Powered by a 24VDC filtered and
regulated power supply
• Accommodates all types of mortise
cylinders with a standard Yale cam
• Armed and disarmed field
selectable status indicator
• Power supply delivers a constant
24VDC of filtered and regulated
voltage at a rated load of 1A
• Patented mounting plate and
strike locator system provide
perfect alignment with door and
frame
• Delayed arming allows arming
after door closes
• Stainless steel, 3/4" deadlocking
Pullman-type latch bolt
• Non-handed, field sizeable
• 100dB alarm
• 1/8 turn cylinder dogging
• Sturdy angled end-cap
• Heavy-duty ribbed aluminum rail
extrusion
• Single mortise cylinder provides
arming and dogging - can be
factory installed
• State-of-the-art electronics offer
reliable security and instantaneous
alarm
• Visual and audible arming
indicators
• 9V battery provides alarm function
only in case of power failure
• Remote signal output and remote
bypass input standard
• Alarm triggered by latch bolt
movement
• Fire alarm input can be connected
at power supply
• Includes delayed egress panic bar,
24VDC filtered and regulated
power supply, door sign and
3’ conduit loop
Where Trust is Built
Life Safety and Security Door Hardware
Mechanical Options
• MC65 - Factory Installed Mortise
cylinder
• IC7 - Factory Installed IC
Housing
• CD - Cylinder Dogging (Std.)
• 99 - Surface Strike (Std.)
• 98 - Semi Mortise Strike
• LD - Less Dogging
• KS - Key Stop (Key removed only
when armed)
• 36" Door Width (Std.)
• F - 3-Hour Fire Rated
• H - Hurricane Rated
• Available with 628 Base Rail
Extrusion (Std.)
• 48" Door Width
• Available with 711 Base Rail
Extrusion
Other Value Series Delayed Egress
Panic Devices Include:
• AL18 - Surface Armored Loop
(Door/Frame mounted)
• Delayed Egress with
Electromagnetic Lock (EM)
• PT5 - Power Transfer
• NSK - Narrow Kit - for 2" narrow
stile glass door applications
• Outside Trim (see Value Series
Trim Options)
• Optional Cylinder Nut Wrench
P/N: 103779
• Foreign Language Signs available
Contact Factory
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Stile - Fits 2" narrow stile
doors - specify NS
• Machine and Self-Drilling Screws
(Std.)
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Door Stile - Fits minimum 2-1/2"
with 98 strike
• Optional Sex Nuts or Security
Torx Screws available
Electrical Options
• 30 - 30 second delayed egress
available (must have letter from
AHJ)
• SI- Status Indicators - Armed/
Disarmed
Accessories
• SN1 - Sex Nut Fasteners
Technical Information
• Door Stile - Fits 4-1/8" stile doors
with 99 surface strike (Std.)
Riser Diagram
Dimensions
3 1/4” EXTENDED
To Fire Alarm
System
Filtered and Regulated
Power Supply with
Fire Alarm System Loop
24VDC
(Power Supply
Included Standard)
1 3/4”
8 3/8”
18 1/8”
24 1/8”
2 3/8”
2 3/8”
32 7/8”
44 7/8”
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
Terminal Block
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR keyed removable Mullion
UL Listed Controlled Exit Device (FULA)
UL Listed Special Locking Arrangements
(FWAX)
Meets ADA requirements
UBC 97, Standard 7-2 and
TERMINAL BLOCK
UL10C for positive pressure
1 2 3 4 5 6 7 8 9 10 11 12
24 VDC
POWER
ANSI/BHMA certified
(ANSI A156.3 and ANSI A156.24 Grade 1)
POWER
FACTORY INSTALLED
Remote Bypass
(+)
(-)
Meets NFPA 80 & 101
for Life Safety
COMMON
Bypass Relay Output
OPEN
CLOSED
COMMON
Alarm Relay Output
OPEN
CLOSED
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval #FL9052
California State Fire Marshall -
October 19, 2012
2 1/2” DEPRESSED
4140-0127:105, 3774-0127:106 and
3725-0127:108
18 1/8” & 32 7/8”
device dimensions for 36” door
24 1/8” & 44 7/8”
device dimensions for 48” door
Add 2” for NS
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
Where Trust is Built
Life Safety and Security Door Hardware
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Alarmed Rim Exit Device with Remote Signal and Remote Bypass
(V40xEHxR)
The V40xEHxR device option is designed for doors that require a hardwired, alarmed panic device with
remote signal and bypass. When the alarm sounds a remote signal can be sent to turn on a remote
horn, strobe or other security device. The alarm can also be bypassed using a remote button, keypad,
card reader or other access control device. The alarm, with approximately 100dB will sound when
someone attempts to exit, alerting management that an unauthorized exit has occurred. With electric
switching that monitors the pushpad, the V40xEHxR provides a high level of security while also meeting
all life safety concerns.
V40xEHxR
(Shown with mortise cylinder - sold
separately)
V40xEHxRx711xBLK
(Shown with mortise cylinder - sold
separately)
Wide Stile shown, for Narrow Stile, specify NS Option
(for use on 36” and 48” doors with 2” stiles).
V40xEHxRx711
(Shown with mortise cylinder - sold
separately)
Benefits
• Priced to be the best value for
durable and attractive loss
prevention panic hardware
• Secure installation prevents
mistakes, enhances security and
reduces maintenance
• Reduces employee and customer
theft
• Durable design provides years of
trouble free protection, saving on
replacement costs
• Fast and easy installation
• Fits almost any door in any décor
• Controls foot traffic, deters
unauthorized exits, prevents
loss and meets building code
requirements
Features
• V40xEHxR - Alarmed Exit Device
powered by 12V or 24 AC/DC
power, with 9-volt battery backup
• Stainless steel, 3/4" deadlocking
Pullman type latch bolt
• Non-handed, field sizeable
• 100 decibel alarm
• 1/8 turn cylinder dogging
• Heavy duty angled end cap
Mechanical Options
• CD - Cylinder Dogging (Std.)
• LD - Less Dogging
• Heavy duty ribbed aluminum rail
extrusion
• Accommodates all types of mortise
cylinders with a standard Yale cam
(collar required for 7-pin IC cylinders)
• Field selectable key rearm or 2
min. auto rearm
• Patented back plate and plastic
strike locator provide paperless
template for perfect alignment with
door and frame
• Visual and audible arming
indicators
• Single mortise cylinder (sold
separate) provides arming and
dogging
• Delayed arming allows arming
after door closes
• 36 - Fits 36" Door Width (Std.)
• Available with 628 Base Rail
Extrusion (Std.)
• 48 - Fits 48" Door Width
• IC7 - 7 pin small format
interchangeable cylinder housing
pre-installed at factory
• F - 3-Hour Fire Rated
• MC65 - Mortise cylinder
pre-installed at factory
• 99 - Surface Strike (Std.)
• KS - Key Stop - key removed only
when armed
• State of art electronics offer reliable security and instantaneous
alarm
• H - Hurricane Rated
• 98 - Semi Mortise Strike
• Armed and disarmed field selectable status indicator
• Available with 711 Base Rail
Extrusion
Electrical Options
• R - Remote Signal - Form C
signaling when alarm sounds and
remote bypass input allows
authorized use without an alarm
• AD1 - 1 Second Arming Delay
• AD3 - 10 Minute Auto Rearm
• AD2 - 5 Second Arming Delay
• AD4 - 20 Minute Auto Rearm
• NSK - Narrow Kit - for 2" narrow
stile glass door applications
• Outside Trim (see Value Series
Trim Options)
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Stile - Fits 2" narrow stile
doors - specify NS
• Machine and Self Drilling Screws
(Std.)
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Door Stile - Fits minimum 4-1/8"
with 98 strike
• Optional Sex Nuts or Security
Torx Screws available
• LBM - Latch Bolt Monitoring
Accessories
• SN1 - Sex Nut Fasteners
Technical Information
• Door Stile - Fits 2-1/2" stile doors
with 99 surface strike (Std.)
Riser Diagram
Dimensions
3 1/4” EXTENDED
12VAC
Bypass/Remote Signal
1 3/4”
18 1/8”
24 1/8”
2 1/2” DEPRESSED
2 3/8”
2 3/8”
8 3/8”
32 7/8”
44 7/8”
18 1/8” & 32 7/8” device dimensions for 36” door
24 1/8” & 44 7/8” device dimensions for 48” door
Add 2” for NS
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable Mullion
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval FL9052
California State Fire Marshall 4140-0127:105 & 3725-0127:108
October 19, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Electric Integration Panic Device (V40xEI)
The Electric Integration device, designed for applications where electric integration is required, provides
the customer with a means of integration to new or existing systems, including the Detex Series 800
Logic Controller. The customer may select from these components to integrate and create different
functions from the single product package. This variety of components offers an alarm to sound,
monitor the latch bolt position and/or pushpad when depressed, signals a remote panel by key switch
operation when activated from inside or outside authorization, and offers 2 LED's to enhance required
functions. The operation of switches will open or close (SPDT) to integrate with digital video recorders,
remote alarms, strobe lights, or commence the cycle in a separate delayed egress system.
V40xEI
(Shown with mortise cylinder - sold
separately)
V40xEIxBKxBLK
(Shown with mortise cylinder - sold
separately)
V40xEIx711
(Shown with mortise cylinder - sold
separately)
For use in Value Series rim (V40)
Benefits
• Priced to be the best value for
durable and attractive loss
prevention panic hardware
• Durable electronics provide years
of trouble free service, saving on
replacement costs
• Fast and easy installation
• Controls foot traffic, deters
unauthorized exits, prevents
loss and meets building code
requirements
• Multiple switching choices for
ease-of-use
• Integrates with logic controllers,
power supplies and most security
equipment, to provide reliable
integrated loss prevention
protection
Features
• State-of-the-art electronics for
reliable security and
instantaneous switch activation
• Pushpad/Latch bolt position switch
outputs
• Dual LED visual arming indicators
(one red and one green )
• Tamper resistant switching
electronically monitors pushpad,
latch bolt and outside key access
• Authorized access switch output
• (3) Standard SPDT (Form C)
switches
• All switching capable of handling
12 or 24 Volts AC or DC
• 100dB piezo alarm
• Mortise cylinder key switch
output (Form C)
• Code-compliant door sign
• Simple "plug-in" header type
terminal strip located near end
cap for easy install
Mechanical Options
• LD - Less Dogging
• F - 3-Hour Fire Rated
• H - Hurricane Rated
• KS - Key Stop - Key removed only
when armed
Electrical Options
• 10-800 or 11-800 Logic Controller
and Power Supply for Electric
Integration (required but not
included)
• LBM - Latch Bolt Monitoring
Accessories
• SN1 - Sex Nut Fasteners
• NSK - Narrow Kit - for 2" narrow
stile glass door applications
• Security Torx Screws available
• MC65 - Pre-installed Mortise
Cylinder
• IC-7 - Pre-installed Interchangeable
Core Housing
• FC - Flex Conduit & End-Cap Fittings
• EWH8-626 - Electric Hinge
• Optional Cylinder Nut Wrench
P/N: 103779
• AL18 - Surface Armored Loop
(Door Frame mount)
• PT-5 - Power Transfer
• Foreign Language Signs available
• Door Stile - Fits 2" narrow stile
doors - specify NS
• Machine and Self Drilling Screws
(Std.)
Technical Information
• Detachable plug-in terminal strip
• Switch jumpers for NO/NC
contacts
Finishes
• Through-wire hinge or power
transfer compatible
• Available with 628 Base Rail
Extrusion (Std.)
• Available with 711 Base Rail
Extrusion
Riser Diagram
Dimensions
Authorized Access Output
Remote Monitor Output
Key switch Output
Siren Input
LED Inputs
3 1/4” EXTENDED
1 3/4”
8 3/8”
18 1/8”
24 1/8”
2 1/2” DEPRESSED
2 3/8”
2 3/8”
32 7/8”
44 7/8”
18 1/8” & 32 7/8” device dimensions for 36” door
24 1/8” & 44 7/8” device dimensions for 48” door
Add 2” for NS
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable Mullion
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
November 1, 2012
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval FL9052
California State Fire Marshall 4140-0127:105 & 3725-0127:108
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Delayed Egress Rim Exit Device with Magnetic Locking (V40xEM)
The V40xEM, designed for primary and secondary exits, provides a secure 15-second delay
and a 100dB alarm when someone attempts to exit. This 15-second delay allows management
time to respond before someone exits and the alarm deters the exit from occurring. Per life safety
requirements, the V40xEM must be provided with a fire alarm input, thus providing a system override
during a fire emergency. The V40xEM provides security while meeting all life safety concerns, offering
an exceptional value.
Power Supply Included as
standard feature
V40xEM
(Shown with mortise cylinder - sold
separately)
V40xEMx711xBLK
Shown with factory
installed
mortise cylinder
(Shown with mortise cylinder - sold
separately)
Benefits
Wide Stile shown, for Narrow Stile, specify NS Option
(for use on 36” and 48” doors with 2” stiles).
• 2 point locking provides tandem
holding force of (1400 lb.) latch
bolt and (1500 lb.) electromagnetic
lock
• Reduces employee and customer
theft
• Priced to be the best value for
durable and attractive delayed
egress panic hardware
• Secure installation prevents
mistakes, enhances security and
reduces maintenance
Features
• Powered by a 24VDC filtered and
regulated power supply
• Panic Device and power supply
have passed testing for
electrostatic discharge (ESD) by
an independent testing laboratory
• Power supply delivers a constant
24VDC of filtered and regulated
voltage at a rated load of 1A,
including ripple rejection and
transient noise suppression
circuitry
• Stainless steel, 3/4" deadlocking
Pullman-type latch bolt
• Non-handed, field sizeable
• 100dB alarm
• 1/8 turn cylinder dogging
• Sturdy angled end-cap
• Fast and easy installation
• Fits almost any door in any décor
V40xEMx711
(Shown with mortise cylinder - sold
separately)
• Durable design provides years of
trouble-free protection, saving on
replacement costs
• Controls foot traffic, deters
unauthorized exits, prevents
loss and meets building code
requirements
• Heavy-duty ribbed aluminum rail
extrusion
• Armed and disarmed field
selectable status indicator
• Accommodates all types of
mortise cylinders with a
standard Yale cam
• Delayed arming allows arming
after door closes
• Patented mounting plate and
strike locator system provide
perfect alignment with door and
frame
• Single mortise cylinder provides
arming and dogging - can be
factory installed
• State-of-the-art electronics offer
reliable security and instantaneous
alarm
• Visual and audible arming
indicators
• 9V battery provides alarm function
only in case of power failure
• Remote signal output and remote
bypass input standard
• Alarm triggered by latch bolt
movement
• Fire alarm input can be connected
at power supply or panic bar
• Includes delayed egress panic bar,
24VDC filtered and regulated
power supply, 1500 lb
electromagnetic lock, door sign
and 3’ conduit loop
Where Trust is Built
Life Safety and Security Door Hardware
Mechanical Options
• MC65 - Factory Installed Mortise
cylinder
• IC7 - Factory Installed IC Housing
• F - 3-Hour Fire Rated
• CD - Cylinder Dogging (Std.)
• 98 - Semi Mortise Strike
• LD - Less Dogging
• KS - Key Stop (Key removed only
when armed)
• 36" Door Width (Std.)
• Available with 628 Base Rail
Extrusion (Std.)
• 48" Door Width
• H - Hurricane Rated
• 99 - Surface Strike (Std.)
• Available with 711 Base Rail
Extrusion
Electrical Options
• 30 Second Delayed Egress
(must have letter from AHJ)
• AL18 - Surface Armored Loop
(Door/Frame mounted)
Other Value Series Delayed Egress
Panic Devices Include:
• PT5 - Power Transfer
• Delayed Egress (EE)
• Outside Trim (see Value Series
Trim Options)
• Foreign Language Signs available
Contact Factory
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Stile - Fits 2" narrow stile
doors - specity NS
• Machine and Self-Drilling Screws
(Std.)
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Door Stile - Fits minimum 4-1/8"
with 98 strike
• Optional Sex Nuts or Security
Torx Screws available
Accessories
• SN1 - Sex Nut Fasteners
• NSK - Narrow Kit - for 2" narrow
stile glass door applications
Technical Information
• Door Stile - Fits 2-1/2" stile doors
with 99 surface strike (Std.)
Dimensions
Riser Diagram
Magnetic Lock
(included)
To Fire Alarm
System
Filtered and Regulated
Power Supply with
Fire Alarm System Loop
24VDC
(Power Supply
Included Standard)
3 1/4” EXTENDED
1 3/4”
8 3/8”
2 1/2” DEPRESSED
18 1/8”
24 1/8”
2 3/8”
2 3/8”
32 7/8”
44 7/8”
18 1/8” & 32 7/8” device dimensions for 36” door
J
24 1/8” & 44 7/8” device dimensions for 48” door
Flex Conduit
Door Loop
(included)
Add 2” for NS
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
Terminal Block
TERMINAL BLOCK
1
2
3
4
5
6
7
8
9 10 11 12
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR keyed removable Mullion
UL Listed Controlled Exit Device (FULA)
UL Listed Special Locking Arrangements
(FWAX)
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
24 VDC
POWER
POWER
FACTORY INSTALLED
Remote Bypass
(+)
(-)
COMMON
Bypass Relay Output
OPEN
CLOSED
COMMON
Alarm Relay Output
OPEN
CLOSED
^
ANSI/BHMA certified
(ANSI A156.3 and ANSI A156.24 Grade 1)
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval #FL9052
California State Fire Marshall -
October 19, 2012
4140-0127:105, 3774-0127:106 and
3725-0127:108
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
Where Trust is Built
Life Safety and Security Door Hardware
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Electric Latch Retraction Panic Device (V40xER)
The Electric Latch Retraction (V40xER) exit device option is designed for entrance and exit doors with
panic or fire exit hardware where remote unlocking, remote dogging, access control or automatic door
operator is desired.
V40xERx711xBLK
Wide Stile shown, for Narrow Stile, specify NS Option
(for use on 36” and 48” doors with 2” stiles).
Benefits
• Durable design provides years of
trouble free protection, saving on
replacement costs
• Fits almost any door in any décor
• Controls foot traffic, deters
unauthorized exits, prevents
loss and meets building code
requirements
• Momentary or maintained latch
and pushpad retraction
• Requires 81-800, 82-800 or
83-800 Controller and Power
Supply - sold separately
Features
• Voltage - 24VDC
• Continuous Duty Motor - quiet
operation
• Optional EX Exit Switch Pushpad monitor switch
Mechanical Options
• 36 - Fits 36" Door Width (Std.)
• H - Hurricane Rated
• 48 - Fits 48" Door Width
• 99 - Surface Strike (Std.)
• F - 3-Hour Fire Rated
• 98 - Semi Mortise Strike
Electrical Options
• 81-800, 82-800 or 83-800 Logic
Controller and Power Supply
(Required - sold separately)
• Available with 628 Base Rail
Extrusion (Std.)
• Available with 711 Base Rail
Extrusion
Accessories
• SN1 - Sex Nut Fasteners
• NSK - Narrow Kit - for 2" narrow
stile glass door applications
• Outside Trim (see Value Series
Trim Options)
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Stile - Fits 2" narrow stile
doors - specity NS
• Machine and Self-Drilling Screws
(Std.)
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Door Stile - Fits minimum 4-1/8"
with 98 strike
• Optional Sex Nuts or Security
Torx Screws available
Technical Information
• Door Stile - Fits 2-1/2" stile doors
with 99 surface strike (Std.)
Riser Diagram
Controller and
Power Supply
(81-800 Shown sold separately)
115VAC
input
Dimensions
3 1/4” EXTENDED
EX - Request to
Exit Switch
Output
(optional)
1 3/4”
18 1/8”
24 1/8”
2 1/2” DEPRESSED
2 3/8”
2 3/8”
8 3/8”
32 7/8”
44 7/8”
18 1/8” & 32 7/8” device dimensions for 36” door
24 1/8” & 44 7/8” device dimensions for 48” door
Add 2” for NS
Dry Contact
Input
ER ELECTRIC
LATCH RETRACTION
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable Mullion
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval FL9052
California State Fire Marshall 4140-0127:105 & 3725-0127:108
October 19, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Electric Switching Rim Exit Device (V40xES)
The Electric Switching (V40xES) device option is designed for doors that require a means of switching
when someone depresses the pushpad on the panic device during egress or retracts the latch using
an authorized key in an outside trim. Always used in conjunction with other security items, the V40xES
provides a normally closed or normally open contact that can be used for a variety of different uses
such as activating a remote horn or strobe. The V40xES is UL listed as panic and fire exit hardware as
well as UBC standard 7-02 (positive pressure).
V40xES
V40xESxRWE
Wide Stile shown, for Narrow Stile, specify NS Option
(for use on 36” and 48” doors with 2” stiles).
Benefits
• Priced to be the best value for
durable and attractive loss
prevention panic hardware
• Reduces employee and customer
theft
Features
• Signal switching monitors latch
bolt, pushpad and authorized
access
• Fast and easy installation
• Secure installation prevents
mistakes, enhances security and
reduces maintenance
• Controls foot traffic, deters
unauthorized exits, prevents
loss and meets building code
requirements
• Remote bypass capability
• Switch jumpers for NO/NC
contacts
• CD - Cylinder Dogging (Std.)
• F - 3-Hour Fire Rated
• LD - Less Dogging
• H - Hurricane Rated
• FC - Flex Conduit Loop (3') and
end-cap connector
Mechanical Options
Electrical Options
• R - Remote Signal (Form C
signaling when alarm sounds)
• LBM - Latch Bolt Monitoring
Accessories
• SN1 - Sex Nut Fasteners
• SSK - Security Torx Screws
• KS - Key Stop - key removed only
when armed
• MC65 - Pre-Installed mortise
cylinder
• IC7 - Pre-installed interchangeable
core housing
• PT5 - Power Transfer
• NSK - Narrow Kit - for 2" narrow
stile glass door applications
• EWH8-626 - Electric Hinge
Technical Information
• Door Stile - Fits 2" narrow stile
doors - specity NS
Riser Diagram
• Detachable plug-in terminal strip
• Machine and Self Drilling Screws
(Std.)
• Through-wire or power transfer
compatible
• Switch jumpers for NO/NC
contacts
Dimensions
3 1/4” EXTENDED
1 3/4”
18 1/8”
24 1/8”
2 1/2” DEPRESSED
2 3/8”
2 3/8”
8 3/8”
32 7/8”
44 7/8”
18 1/8” & 32 7/8” device dimensions for 36” door
24 1/8” & 44 7/8” device dimensions for 48” door
Add 2” for NS
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable Mullion
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval FL9052
California State Fire Marshall 4140-0127:105 & 3725-0127:108
October 19, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Electric Request to Exit Switching (V40xEX)
The V40xEX Electric Request to Exit Switching device, designed for applications where electric
signaling is required, provides the customer with a means of signaling when the push pad is depressed.
The EX Exit Switching monitors the pushpad and when depressed, will open or close (SPDT) to signal
an alarm, send a remote signal to monitor egress, or commence the cycle in a separate delayed egress
system.
V40xEXxHDx628xBLK
V40xEXxHDx711xBLK
V40xEXxHDxRWE
Wide Stile shown, for Narrow Stile, specify NS Option
(for use on 36” and 48” doors with 2” stiles).
Benefits
• Priced to be the best value for
panic exit hardware
• Integrates with other loss
prevention equipment
• Withstands over 1400 pounds of
static pull force for greater security
• Provides reliable loss prevention
protection 24-hours a day
• Large, steel reinforced pushpad
with black ABS cover resists
damage
• Fits almost any door in any décor
•Rugged, durable design reduces
maintenance
• Secure installation prevents costly
mistakes and enhances security
• Patented back plate and plastic
strike locator designed for perfect
alignment with door and frame
without paper template
Features
• Stainless steel self-latching bolt
• Heavy-duty angled end cap
• Tamper resistant housing protects
internal switching, preventing
manipulation
• Tamper-resistant switching
electronically monitors pushpad
• Standard SPDT (Form C) switch
with three wires, Yellow (N/O),
Brown (Common) & Green (N/C),
creating either a Normally Open
or Closed contact
• Switch capable of signalling at
low currents for integration to a
central control station
• To shunt power to an
electromagnetic lock, specify EXV
Mechanical Options
• CD - Cylinder Dogging
• 36 - Fits 36" Door Width (Std.)
• HD - Hex Dogging (Std.)
• 48 - Fits 48" Door Width
• LD - Less Dogging
• 99 - Surface Strike (Std.)
• F - 3-Hour Fire Rated
• 98 - Semi Mortise Strike
• Available with 628 Base Rail
Extrusion (Std.)
• Available with 711 Base Rail
Extrusion
• RWE - Red pushpad with white
lettering
• H - Hurricane Rated
Accessories
• SN1 - Sex Nut Fasteners
• SSK3 - Security Screw Kit
• NSK - Narrow Kit - for 2” narrow
stile glass door applications
• FC - Flex Conduit Kit 3’ mounts
to end cap device
• Outside Trim (see Value Series
Trim Options)
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Stile - Fits 2" narrow stile
doors - specify NS
• Machine and Self Drilling Screws
(Std.)
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Door Stile - Fits minimum 4-1/8"
with 98 strike
• Optional Sex Nuts or Security
Torx Screws available
• Door Stile - Fits 2-1/2" stile doors
with 99 surface strike (Std.)
Riser Diagram
Dimensions
3 1/4” EXTENDED
1 3/4”
18 1/8”
24 1/8”
2 1/2” DEPRESSED
2 3/8”
2 3/8”
8 3/8”
32 7/8”
44 7/8”
18 1/8” & 32 7/8” device dimensions for 36” door
24 1/8” & 44 7/8” device dimensions for 48” door
Add 2” for NS
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable Mullion
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval FL9052
California State Fire Marshall 4140-0127:105 & 3725-0127:108
November 1, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Electric Request to Exit Switching Weatherized (V40xEXxW)
The V40xEXxW Electric Request to Exit Switching device, designed for outdoor gates and other wet
environments, provides the customer with a means of signaling when the pushpad is depressed. This
will open or close switch contacts (SPDT) and signal an alarm, remote strobe light or commence the
cycle in a separate delayed egress system.
V40xEXxW
V40xEXxWxBKxBLK
V40xEXxWxCD
Wide Stile shown, for Narrow Stile, specify NS Option
(for use on 36” and 48” doors with 2” stiles).
Benefits
• Priced to be the best value for
panic exit hardware
• Integrates with other loss
prevention equipment
• Withstands over 1400 pounds of
static pull force for greater security
• Provides reliable loss prevention
protection 24-hours a day
• Large, steel reinforced pushpad
with black ABS cover resists
damage
• Fits almost any door in any décor
• Rugged, weatherized and
corrosion resistant for years of
reliable service
• Secure installation prevents costly
mistakes and enhances security
• Patented back plate and plastic
strike locator designed for perfect
alignment with door and frame
without paper template
Features
• Stainless steel, 3/4" throw
deadlocking latch bolt
• Heavy-duty angled end cap
• Tamper resistant switching
electronically monitors pushpad
• Covers a 161 door prep
• Standard SPDT (Form C) switch
with three wires, Yellow (N/O),
Brown (Common) & Green (N/C),
creating either a Normally Open
or Closed contact
• Weatherized switch for signalling
at low currents to a central control
station
• Fits 2" narrow stile doors with
optional narrow stile door kit
• With stands environmental
elements when installed on gates
or exterior doors
• To shunt power to an
electromagnetic lock, specify EXV.
Mechanical Options
• CD - Cylinder Dogging
• 36 - Fits 36" Door Width (Std.)
• HD - Hex Dogging (Std.)
• 48 - Fits 48" Door Width
• LD - Less Dogging
• 99 - Surface Strike (Std.)
• F - 3-Hour Fire Rated
• 98 - Semi Mortise Strike
• H - Hurricane Rated
• 95 - Double Door Strike
• Available with 628 Base Rail
Extrusion (Std.)
• Available with 711 (Black) Base
Rail Extrusion
• RWE - Red pushpad with white
lettering
• GTPLV40 - Adjustable Gate Plate
Accessories
• SN1 - Sex Nut Fasteners
• NSK - Narrow Kit - for 2" narrow
stile glass door applications
• FC - Flex Conduit Kit for endcap
to transfer wire to frame
• SSK3 - Security Screw Kit
• Outside Trim (see Value Series
Trim Options)
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Stile - Fits 2" narrow stile
doors - specify NS
• Machine and Self Drilling Screws
(Std.)
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Door Stile - Fits minimum 4-1/8"
with 98 strike
• Optional Sex Nuts or Security
Torx Screws available
• KS - Key Stop - key removed only
when armed
Technical Information
• Door Stile - Fits 2-1/2" stile doors
with 99 surface strike (Std.)
Riser Diagram
Dimensions
3 1/4” EXTENDED
1 3/4”
2 1/2” DEPRESSED
18 1/8”
24 1/8”
2 3/8”
2 3/8”
8 3/8”
32 7/8”
44 7/8”
18 1/8” & 32 7/8” device dimensions for 36” door
24 1/8” & 44 7/8” device dimensions for 48” door
Add 2” for NS
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable Mullion
UL1034-34 Temperature Section 34
[Temperature Range 31° F (-35° C) to
151° F (+66° C)]
UL1034-54 Dust Section 54
Meets ADA requirements
MIL-STD 810F(G), Method 506.4
(Driving Rain Test)
MIL-STD 810F(G), Method 509.4
(Salt fog Test)
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval FL9052
California State Fire Marshall 4140-0127:105 & 3725-0127:108
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
October 19, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Alarmed Surface Vertical Rod Device (V50xEB/EH)
The V50xEB/EH is designed for primary and secondary exits that require an alarmed surface vertical rod exit
device. The 100dB alarm will sound when someone attempts to exit, alerting management to the unauthorized
exit. Available in various configurations, the V50xEB/EH provides security while meeting all life safety concerns,
offering exceptional value.
V50xEB
(shown)
ANSI 156.3 - 2001
Grade 1
Type 2
V50xEBxRCxBG
(Optional Rod Covers and
Bolt Guard shown)
Benefits
• Priced to be the best value for
durable, attractive 2 point locking
loss prevention panic hardware
• Reduces employee and customer
theft
• 2 Point locking provides superior
holding force
• Fast and accurate installation
• Secure installation prevents
mistakes, enhances security and
reduces maintenance
• Durable design provides years of
trouble-free protection, saving on
replacement cost
• Minimal door prep saves time and
money
• Fits any door in almost any décor
• Controls foot traffic, deters
unauthorized exits, prevents loss
and meets building code
requirements
Features
• V50xEB - Alarmed 2 point surface
vertical rod exit device powered
by standard 9-volt battery
• V50xEH - Alarmed 2 point surface
vertical rod exit device powered
by 12V or 24V AC/DC with standard 9-volt battery backup
• Stainless steel, 3/4" deadlocking
Pullman-type top latch bolt
• Bottom drop bolt, 5/8" dia. x
5-5/8" long secures into strike
plate
• Handed, field reversible, field
sizeable
• 100 decibel alarm
• 1/8 turn dogging
• Heavy-duty angled end cap
• Heavy-duty ribbed aluminum rail
extrusion
• Accommodates all types of mortise
cylinders with a standard Yale cam
(collar required for 7-pin IC
cylinders)
• Patented mounting plate and
strike locator system replaces
paper template
• Single mortise cylinder (sold
separate) provides arming and
dogging
• State-of-art electronics offer
reliable security and instantaneous
alarm
• Field selectable key rearm or 2
min. auto rearm
• Visual and audible arming
indicators
• Armed and disarmed field
selectable status indicator
• Delayed arming allows arming
after door closes
• Impact resistant ABS and
anodized surfaces
• Modular design accepts a variety
of outside trims and functions
• Standard and narrow stile pull
trims available
Mechanical Options
• V51 - Top Rod Only
• 48 - Fits 48" Door Widths
• F - 3-Hour Fire Rated
• 84 - Fits 7' Door Height (Std.)
• CD - Cylinder Dogging (Std.)
• 96 - Fits 8' Door Height
• LD - Less Dogging
• 120 - Fits 10' Door Height
• 36 - Fits 36" Door Widths (Std.)
• RC - Rod Covers (630 Brushed
Stainless)
• BG - Bottom bolt and 12" ADA
ramped cover (630 Brushed
Stainless)
Mechanical Options Cont'd
• NS - Fits 2" Narrow stile glass
door
• Available with 628 base rail
extrusion
• 96 Surface top stike top (Std.)
• Available with 711 base rail
extrusion
• 96B Bottom dust proof strike
• RWE - Red pushpad with white
English text standard (contact
factory for list of available
languages)
Electrical Options
• Electric Battery Alarm (EB)
• Electric Hardwired Alarm (EH)
• Delayed Egress (EE)
• Electric Hardwired Alarm with
Remote Signal (EHxR)
Accessories
• Outside Trim (see Value Series
Trim Options)
• SN1 - Sex Nut Kit (2 per package)
• KS - Key Stop - key removed only
when armed
Technical Information
• Door Stile - Fits 2-1/2" stile doors
(Std.)
Refer to Electrified Options section for
more information
• GB# - Glass Bead Kits
• NSK - Narrow Kit for 2" narrow
stile glass door applications
• Door Stile - Fits 2" narrow stile
doors - specify NS
• Fasteners - Machine and SelfDrilling Screws standard
Dimensions
Top
3 1/8” EXTENDED
Bottom
2 3/8” DEPRESSED
18 1/8”
24 1/8”
1 13/16”
2 3/8”
2”
2 3/8”
24 1/8” & 44 7/8”
device dimensions
for 48” door
1 3/4”
6 1/4”
5 1/4”
8 3/8”
1 1/2”
1 13/16”
Listings and Approvals
Riser Diagram
Transformer
2 7/8”
32 7/8”
44 7/8”
UL Listed
Panic Hardware
LISTED
LISTED
18 1/8” & 32 7/8”
device dimensions
for 36” door
Add 2” for NS
Detex Limited Warranty
10 Year Mechanical/3 year Electrical
Limited Manufacturer's Warranty
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
8'x10' pairs of doors
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
(Shown with optional hardware)
October 19, 2012
for Life Safety
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Weatherized Alarmed Surface Vertical Rod Exit Device (V50xEBxW)
The V50xEBxW device option is designed for pairs of doors or gates without mullions that require
battery powered, alarmed weatherized panic devices. The 100dB alarm will sound when someone
attempts to exit, alerting management to the unauthorized exit. The internal alarm with both remote
bypass and remote signaling capabilities is ideal for applications where both security and life safety are
a concern. In addition to listing as UL panic and fire exit hardware, this device conforms to UL 1034-34
Temperature Section 34, UL 1034-54 Dust Section 54, MIL-STD 810F Method 506.4 (driving rain test),
MIL-STD 810F, Method 509.4 (salt fog test) and UBC standard 7-1 (positive pressure).
V50xEBxWx711
V50xEBxW
(Shown with mortise cylinder sold separately)
(Shown with mortise cylinder sold separately)
V50xEBxWx711xBLK
V50xEBxRCxBG
(Optional Rod Covers and
Bolt Guard shown)
Benefits
• Weather resistant loss prevention
hardware designed for use in
outdoor or wet environments
• Fast and accurate installation
prevents costly mistakes and
enhances security
• Controls foot traffic to deter
unauthorized exits and reduces
employee and customer theft
• Patented mounting plate and plastic
strike locator designed for perfect
alignment with door and frame
without paper template
• Provides reliable loss prevention
protection both indoors and out, 24
hours a day
• Rugged, durable, corrosionresistant design reduces
maintenance
Features
• Powered by standard 9-volt
battery
• Handed, field reversible, field
sizeable
• 100dB alarm
• Stainless steel 3/4” deadlocking,
Pullman-type top latch
• Bottom drop bolt, 5/8” dia. x 5-5/8”
long secures into strike plate
• Tamper-resistant, immersionproof security switches
• Heavy duty angled end cap
• Plated steel, anodized aluminum
and ABS components endure
heavy use and exposure to the
elements
• Built-in inhibitors prevent ABS
fading and weakening, typically
caused by exposure to extreme
temperatures and UV rays
• Aesthetically pleasing design for
almost any door or gate in any
décor
• Single mortise cylinder (sold
separate) provides arming and
dogging
• State of the art electronics offer
reliable security and instantaneous
alarm
• Field selectable key rearm or 2
min. auto rearm
• Accommodates all types of mortise
cylinders with a standard Yale cam
(collar required for 7-pin IC
cylinders)
• Visual and audible arming
indicators
• Tamper-resistant housing protects
electronics, battery and internal
hardware, preventing manipulation
• Delayed arming allows arming
after door closes
• Armed and disarmed field
selectable status indicator
Mechanical Options
• CD - Cylinder Dogging (Std.)
• LD - Less Dogging
• F - 3-Hour Fire Rated
• IC-7 - 7 pin small format
interchangeable cylinder housing
pre-installed at factory
• MC65 - Mortise cylinder preinstalled at factory
• 36 - Fits 36” Door Width (Std.)
• 48 - Fits 48” Door Width
• Available with 628 Base Rail
Extrusion (Std.)
• Available with 711 (Black)
Base Rail Extrusion
Mechanical Options Cont’d and Accessories
• SN1 - Sex Nut Fasteners
• KS - Key Stop - key removed only
when armed
• NSK - Narrow Kit - for 2” narrow
stile glass door applications
Detex Limited Warranty
• Outside Trim (see Value Series
Trim Options)
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
• Optional Cylinder
Nut Wrench
P/N: 103779
Riser Diagram
Remote Signal
Remote Bypass
Electrical Options
• Remote Signal Form C
signaling when alarm sounds and
remote bypass input allows
authorized use without an alarm
(standard feature)
Other Weatherized Detex Products
Include:
• Request to Exit Signalling
Weatherized (EXxW)
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Machine and Sheet Metal Screws
(Std.)
• 2” Aluminum doors need to be
ordered as a narrow stile (NS)
• Optional Sex Nuts or Security
Torx Screws available
• Door Thickness - Fits standard
1-3/4" - 2-1/4" (for other door
thicknesses, contact factory)
• Rail is heavy ribbed aluminum
extrusion
Dimensions
Top
3 1/8” EXTENDED
Bottom
2 3/8” DEPRESSED
18 1/8”
24 1/8”
1 13/16”
2 3/8”
2”
2 3/8”
24 1/8” & 44 7/8”
device dimensions
for 48” door
1 3/4”
6 1/4”
5 1/4”
1 1/2”
8 3/8”
1 13/16”
18 1/8” & 32 7/8”
device dimensions
for 36” door
2 7/8”
Add 2” for NS
32 7/8”
44 7/8”
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
8'x10' pairs of doors
UL1034 - 34 Temperature Section 34
[Temperature Range -31° F (-35° C) to
150° F (+66° C)]
UL1034 - 54 Dust Section 54
Meets ADA requirements
ANSI/BHMA certified A156.3
November 1, 2012
UBC 97, Standard 7-2 and
UL10C for positive pressure
Meets NFPA 80 & 101
for Life Safety
California State Fire Marshall 4140-0127:105 and
3725-0127:108
MIL-STD 810F (G), Method 509.4
(Salt Fog Test)
MIL-STD 810F (G), Method 506.4
(Driving Rain), Procedure 1
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Electric Dogging (V50xED)
The V50xED Electric
Dogging is designed for
pairs of entrance and exit
doors with panic or fire exit
hardware. When energized,
and after a pushpad is
depressed, the pushpad
and the latch bolt remain
retracted, providing pushpull operation. Relocking
all devices is accomplished
by using a single switch or
through a fire alarm input.
V50xED
V50xRCxBG
(Optional Rod Covers and
Bolt Guard shown)
Wide Stile shown, for Narrow Stile, specify NS Option
(for use on 36” and 48” doors with 2” stiles).
Benefits
• Priced to be the best value for
durable and attractive panic
hardware
• Pushpad remains depressed
while latch is retracted, preventing
unnecessary cycling, for quieter
operation
• While dogged, pushpad remains
out of the path of egress,
removing the typical catch point
found with other exit devices
• One-touch operation turns any
secured door or group of doors
into push-pull openings and
releases them as required
• Door remains locked until first
activation of pushpad (exit) allows
remote activation of dogging mode
• Allows remote deactivation of
dogging for instantaneous lockdown mode
• Economical alternative to latch
retraction when only dogging is
required
• Rugged, durable design reduces
maintenance
• Secure installation prevents costly
mistakes and enhances security
• Fits almost any door in any décor
• Simple mounting and wiring provide
quick, trouble-free installation,
saving time and money
Features
• Tamper resistant housing
• Stainless steel 3/4” deadlocking,
Pullman-type top latch bolt
• Maintained latch and pushpad
retraction
• Continuous duty magnet
• Operates on 24VAC or 24VDC
• Handed, field reversible
• Bottom drop bolt, 5/8” dia. x 5-5/8”
long secures into strike plate
Mechanical Options
• F - 3-Hour Fire Rated
• 96 - Fits 8’ Door Height
• 96B - Bottom dustproof strike
• H - Hurricane Rated
• 120 - Fits 10’ Door Height
• V51- Top Rod Only
• RC - Rod Covers (630 Brushed
Stainless)
• NS - Fits 2” Narrow stile glass
door
• 36 - Fits 36” Door Width (std.)
• 48 - Fits 48” Door Width
• 84 - Fits 7’ Door Width
• BG - Bottom bolt and 12” ADA
ramped cover (630 Brushed
Stainless)
• 96 Top Surface Strike (Std.)
• Available with 628 Base Rail
Extrusion (Std.)
• Available with 711 Base Rail
Extrusion
Electrical Options
• EX - Request to Exit Switch
• 80-800 Power Supply - 24VDC
filtered, regulated with fire loop
connection with battery charging
circuit
• PP-5152-2 24VAC transformer
• SN1 - Sex Nut Fasteners
• PT5 - Power Transfer
• FC - Flex Conduit and End Cap
• EWH8-626 - Electric Hinge
• NSK - Narrow Kit - for 2" narrow
stile glass door applications
• 90-800 - 24VDC filtered, regulated
with fire loop connection
Accessories
• Outside Trim (see Value Series
Trim Options)
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Stile - Fits 2" narrow stile
doors - specify NS
• Machine and Self Drilling Screws
(Std.)
• Optional Sex Nuts or Security
Torx Screws available
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Door Stile - Fits 2-1/2" stile doors
(Std.)
Dimensions
3 1/4” EXTENDED
1 3/4”
Top
Bottom
1 13/16”
18 1/8”
24 1/8”
3 1/8” EXTENDED
2 3/8”
8 3/8”
18 1/8”
24 1/8”
2 3/8”
2”
2 1/2” DEPRESSED
2 3/8”
2 3/8” DEPRESSED
32 7/8”
44 7/8”
18 1/8” & 32 7/8” device dimensions for 36” door
2 3/8”
24 1/8” & 44 7/8” device dimensions for 48” door
1 3/4”
6 1/4”
Add 2” for NS
5 1/4”
1 1/2”
8 3/8”
2 7/8”
Detex Limited Warranty
1 13/16”
32 7/8”
10 Year Mechanical/3 Year Electrical
44 7/8”
Limited Manufacturer's Warranty
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
ANSI/BHMA certified A156.3
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable Mullion
Meets NFPA 80 & 101
Meets ADA requirements
State of Florida Approval FL9052
UBC 97, Standard 7-2 and
California State Fire Marshall 4140-0127:105 and 3725-0127:108
UL10C for positive pressure
September 20, 2012
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Delayed Egress Surface Vertical Rod Device (V50xEE)
The V50xEE, designed for primary and secondary exits, provides a secure 15-second delay
and a 100dB alarm when someone attempts to exit. This 15-second delay allows management
time to respond before someone exits and the alarm deters the exit from occurring. Per life safety
requirements, the V50xEE must be provided with a fire alarm input, thus providing a system override
during a fire emergency. The V50xEE provides security while meeting all life safety concerns, offering
an exceptional value.
Power Supply Included
as standard feature
V50xEE
(Shown with factory installed
mortise cylinder - sold separately)
Wide Stile shown, for Narrow Stile, specify NS Option
(for use on 36” and 48” doors with 2” stiles).
Benefits
• Priced to be the best value for
durable and attractive delayed
egress panic hardware
• Secure installation prevents
mistakes, enhances security and
reduces maintenance
• Reduces employee and customer
theft
• Durable design provides years of
trouble-free protection, saving on
replacement costs
• Fast and easy installation
• Fits almost any door in any décor
• Controls foot traffic, deters
unauthorized exits, prevents
loss and meets building code
requirements
Features
• Power supply delivers a constant
24VDC of filtered and regulated
voltage at a rated load of 1A
• Stainless steel, 3/4" deadlocking
Pullman-type latch bolt
• Non-handed, field sizeable
• 100dB alarm
• 1/8 turn cylinder dogging
• Sturdy angled end-cap
• Heavy-duty ribbed aluminum rail
extrusion
• Accommodates all types of mortise
cylinders with a standard Yale cam
• Armed and disarmed field
selectable status indicator
• Patented mounting plate and
strike locator system provide
perfect alignment with door and
frame
• Delayed arming allows arming
after door closes
• Single mortise cylinder provides
arming and dogging - can be
factory installed
• State-of-the-art electronics offer
reliable security and instantaneous
alarm
• Visual and audible arming
indicators
• 9V battery provides alarm function
only in case of power failure
• Remote signal output and remote
bypass input standard
• Alarm triggered by pushpad
movement
• Fire alarm input can be connected
at power supply
• Includes delayed egress panic bar,
24VDC filtered and regulated
power supply, door sign and
3’ conduit loop
Where Trust is Built
Life Safety and Security Door Hardware
Mechanical Options
• MC65 - Factory Installed Mortise
cylinder
• IC7 - Factory Installed IC
Housing
• CD - Cylinder Dogging (Std.)
• Available with 628 Base Rail
Extrusion (Std.)
• LD - Less Dogging
• Available with 711 Base Rail
Extrusion
• KS - Key Stop (Key removed only
when armed)
• 36" Door Width (Std.)
• F - 3-Hour Fire Rated
• 48" Door Width
Electrical Options
• 30 - 30 second delayed egress
available (must have letter from
AHJ)
• AL18 - Surface Armored Loop
(Door/Frame mounted)
• PT5 - Power Transfer
Accessories
• SN1 - Sex Nut Fasteners
• Outside Trim (see Value Series
Trim Options)
• NSK-SVR - Narrow Kit - for 2"
narrow stile glass door
applications
• Foreign Language Signs available
Contact Factory
• Optional Cylinder Nut Wrench
P/N: 103779
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Stile - Fits 4-1/8” stile doors
with 96 surface strike (Std.)
• Machine and Self-Drilling Screws
(Std.)
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Door Stile - Fits 2" narrow stile
doors specify NS
• Optional Sex Nuts or Security
Torx Screws available
Riser Diagram
Dimensions
3 1/8” EXTENDED
To Fire Alarm
System
Filtered and Regulated
Power Supply with
Fire Alarm System Loop
24VDC
(Power Supply
Included Standard)
2 3/8” DEPRESSED
18 1/8”
24 1/8”
1 13/16”
2 3/8”
2”
2 3/8”
1 3/4”
6 1/4”
5 1/4”
1 1/2”
8 3/8”
1 13/16”
2 7/8”
18 1/8” & 32 7/8”
device dimensions
for 36” door
24 1/8” & 44 7/8”
device dimensions
for 48” door
Add 2” for NS
32 7/8”
44 7/8”
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
Where Trust is Built
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
ANSI/BHMA certified
(ANSI A156.3 and ANSI A156.24 Grade 1)
Meets NFPA 80 & 101
UL Listed Fire Exit Hardware
for 3 hours, maximum
for Life Safety
UBC 97, Standard 7-2 and
UL10C for positive pressure
Meets ADA requirements
October 19, 2012
Life Safety and Security Door Hardware
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Alarmed Surface Vertical Rod Device with Remote Signal and Remote Bypass (V50xEHxR)
The V50xEHxR device option is designed for pairs of doors without mullions that require a hardwired, alarmed
panic device with remote signal and bypass. When the alarm sounds a remote signal can be sent to turn on a
remote horn, strobe or other security device. The alarms can also be bypassed using a remote button, keypad,
card reader or other access control device. The alarm, with approximately 100dB will sound when someone
attempts to exit, alerting management that an unauthorized exit has occurred. With electric switching that
monitors the pushpad, the V50xEHxR provides a high level of security while also meeting all life safety concerns.
V50xEHxR
(shown)
V50xEHxRxRCxBG
(Optional Rod Covers and
Bolt Guard shown)
ANSI 156.3 - 2001
Grade 1
Type 2
Benefits
• Priced to be the best value for
durable, attractive loss prevention
panic hardware
• Minimal door prep saves time and
money
• Fits any door in almost any décor
• Secure installation prevents
mistakes, enhances security and
reduces maintenance
• Controls foot traffic, deters
unauthorized exits, prevents
loss and meets building code
requirements
• Durable design provides years of
trouble-free protection, saving on
replacement cost
• Outside trims are easily changed
or rekeyed without removing
device from door
• V50xEHxR- Alarmed exit device
powered by 12V or 24V AC/DC
power, with a 9-volt battery back-up
• Bottom drop bolt, 5/8” dia. x
5-5/8” long secures into strike
plate
• State-of-art electronics offer
reliable security and instantaneous
alarm
• Patented mounting plate and
strike locator system replaces
paper template
• 1/8 turn dogging
• Field selectable key rearm or 2
min. auto rearm
• Reduces employee and customer
theft
• Fast and easy installation
Features
• Handed, field reversible, field
sizeable
• 100 decibel alarm
• Stainless steel, 3/4" deadlocking
Pullman-type top latch bolt
Mechanical Options
• CD - Cylinder Dogging (Std.)
• LD - Less Dogging
• IC7 - 7 pin small format
interchangeable housing
pre-installed at factory
• MC65 - Mortise cylinder preinstalled at factory
• Heavy-duty angled end cap
• Accommodates all types of mortise
cylinders with a standard Yale cam
(collar required for 7-pin IC
cylinders)
• Visual and audible arming
indicators
• Armed and disarmed field
selectable status indicator
• Single mortise cylinder (sold
separate) provides arming and
dogging
• KS - Key Stop (key removed only
when armed)
• Available with 628 Base Rail
Extrusion (Std.)
• 36 - Fits 36” door width (Std)
• Available with 711 Base Rail
Extrusion
• 48 - Fits 48” door width
• F - 3-Hour Fire Rated
Electrical Options
• 1, 5 second arming delay
(15 second - standard)
• 10 or 20 minute auto rearm
( 2 minute - standard)
• SI - Status Indicator LED’s
indicate armed status
• NSK - Narrow Kit for 2" narrow
stile glass door applications
• Outside trim (see Value Series
Trim Options)
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Stile - Fits 2-1/2” with 96
surface strike (Std.)
• Optional Sex Nuts or Security
Torx Screws available
• Door Thickness - Fits standard
1-3/4" - 2-1/4" (for other door
thicknesses contact factory)
• Machine and Sheet Metal Screws
(Std.)
• Rail is heavy ribbed aluminum
extrusion
Accessories
• SN1 - Sex Nut fasteners
• KS - Key Stop - key removed only
when armed
Technical Information
Dimensions
Top
3 1/8” EXTENDED
Bottom
2 3/8” DEPRESSED
18 1/8”
24 1/8”
1 13/16”
2 3/8”
2”
2 3/8”
24 1/8” & 44 7/8”
device dimensions
for 48” door
1 3/4”
6 1/4”
5 1/4”
8 3/8”
1 1/2”
1 13/16”
2 7/8”
Add 2” for NS
32 7/8”
44 7/8”
Listings and Approvals
Riser Diagram
18 1/8” & 32 7/8”
device dimensions
for 36” door
UL Listed
Panic Hardware
Transformer
Bypass/Remote Signal
LISTED
LISTED
Detex Limited Warranty
10 Year Mechanical/3 year Electrical
Limited Manufacturer's Warranty
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
8'x10' pairs of doors
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
October 22, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Electric Latch Retraction Panic Device (V50xER)
The Electric Latch Retraction (V50xER) exit device option is designed for entrance and exit doors with panic or
fire exit hardware where remote unlocking, remote dogging, access control or automatic door operator is desired.
V50xER
(shown)
ANSI 156.3 - 2001
Grade 1
Type 2
Benefits
• Durable design provides years of
trouble free protection, saving on
replacement costs
Features
• Continuous duty motor with no
solenoid
• Patented mounting plate and
strike locator system replaces
paper templates
• Fits almost any door in any décor
V50xERxRCxBG
(Optional Rod Covers and
Bolt Guard shown)
• Provides a means for remote
dogging and lockdown
• Simultaneous latch/rod and
pushpad retraction provides
smooth surface with no catch
points
• Handed, field reversible, field
sizeable
• Low voltage with no high power
in-rush
• Momentary or maintained
retraction of rods and pushpad
• Long term dogging capability
• Requires 81-800, 82-800 or
83-800 controller and power
supply - sold separately
• Switches to monitor pushpad
Mechanical Options
• FC - Flexible 3’ conduit loop and
end cap connector
• PT5 - Power Transfer
• BG - Bottom Bolt and 12” ADA
ramped cover (630 Brushed
Stainless)
• RC - Rod Covers (630 Brushed
Stainless)
• Latch retraction power supply is
required and sold separately
• 81-800 - Power Supply for single
door
• AL18 - Surface armored loop
Electrical Options
• Exit Switch (EX) - Pushpad
monitor switch
• 82-800 - Power Supply for pairs
of doors
• 83-800 - Power Supply of two
independent doors
Accessories
• SN1 - Sex Nut Fasteners
• DX Bolts - Hinge Side Bolts
• NSK - Narrow Stile - for 2" narrow
stile glass door applications
• Outside trim (see Value Series
Trim Options)
Technical Information
• Voltage - 24VDC
Dimensions
Top
3 1/8” EXTENDED
Bottom
2 3/8” DEPRESSED
18 1/8”
24 1/8”
1 13/16”
2 3/8”
2”
2 3/8”
24 1/8” & 44 7/8”
device dimensions
for 48” door
1 3/4”
6 1/4”
5 1/4”
8 3/8”
1 1/2”
1 13/16”
2 7/8”
115VAC
input
Dry Contact
Input
(DTX-2100
Keypad)
Add 2” for NS
32 7/8”
44 7/8”
Riser Diagram
Controller and
Power Supply
(81-800 Shown sold separately)
18 1/8” & 32 7/8”
device dimensions
for 36” door
Detex Limited Warranty
10 Year Mechanical/3 year Electrical
Limited Manufacturer's Warranty
EX - Request to
Exit Switch
Output
(optional)
ER ELECTRIC
LATCH RETRACTION
Listings and Approvals
UL Listed
Panic Hardware
LISTED
LISTED
UL10C for positive pressure
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
8'x10' pairs of doors
Meets ADA requirements
October 22, 2012
UBC 97, Standard 7-2 and
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Weatherized Electric Latch Retraction Panic Device (V50xERxW / V51xERxW)
The Electric Latch Retraction (V50xERxW) exit device option is designed for entrance and exit doors with panic
or fire exit hardware where remote unlocking, remote dogging, access control or automatic door operator
is desired. In addition to listing as UL panic and fire exit hardware device, this device conforms to UL1034-34
Temperature Section 34, UL1034-54 Dust Section 54, MIL-STD 810F, Method 506.4 (driving rain test); MIL-STD
810F, Method 509.4 (salt fog test) and UBC standard 7-2 (positive pressure).
ANSI 156.3 - 2001
Grade 1
Type 2
V50xER
(shown)
Benefits
• Durable design provides years of
trouble free protection, saving on
replacement costs
• Fits almost any door in any décor
V50xERxRCxBG
(Optional Rod Covers and
Bolt Guard shown)
• Provides a means for remote
dogging and lockdown
• Simultaneous latch/rod and
pushpad retraction provides
smooth surface with no catch
points
• Continuous duty motor with no
solenoid
• Handed, field reversible, field
sizeable
• Low voltage with no high power
in-rush
• Patented mounting plate and
strike locator system replaces
paper templates
• Momentary or maintained
retraction of rods and pushpad
• Long term dogging capability
Features
Mechanical Options
• FC-W - Flexible 3’ conduit loop
and end cap connector
• PT-5 - Power Transfer
• BG - Bottom Bolt and 12” ADA
ramped cover (630 Brushed
Stainless)
• RC - Rod Covers (630 Brushed
Stainless)
• AL18 - Surface armored loop
• Requires 81-800, 82-800 or
83-800 controller and power
supply - sold separately
• F - 3-Hour Fire Rated
• Optional switches to monitor push
pad, specify EXxW
• 36 - Fits 36” door widths (std.)
• BG - Bottom bolt and 12” ADA
ramped cover (630 Brushed
Stainless)
• 48 - Fits 48” door widths
• NS - Fits 2” narrow stile glass door
• 84 - Fits 7’ door height (std.)
• 96 Surface top strike top (std.)
• 96 - Fits 8’ door height
• 96B bottom dust proof strike
• 120 - Fits 10’ door height
• Available with 628 aluminum base
rail
• RC - Rod Covers (630 Brushed
Stainless)
• Available with 711 black base rail
• V51 - Top Rod Only
Electrical Options
• 81-800 - Power Supply for single
door
• 82-800 - Power Supply for pairs
of doors
• EXxW - Request to Exit
Weatherized
• Latch retraction power supply is
required and sold separately
• 83-800 - Power Supply of two
independent doors
Accessories
• SN1 - Sex Nut Fasteners
• DX Bolts - Hinge Side Bolts
• NSK - Narrow Stile - for 2" narrow
stile glass door applications
• Outside trim (see Value Series
Trim Options)
Technical Information
• Voltage - 24VDC
Dimensions
Top
3 1/8” EXTENDED
Bottom
2 3/8” DEPRESSED
18 1/8”
24 1/8”
1 13/16”
2 3/8”
2”
2 3/8”
24 1/8” & 44 7/8”
device dimensions
for 48” door
1 3/4”
6 1/4”
5 1/4”
1 1/2”
8 3/8”
1 13/16”
2 7/8”
115VAC
input
Dry Contact
Input
(DTX-2100
Keypad)
Add 2” for NS
32 7/8”
44 7/8”
Riser Diagram
Controller and
Power Supply
(81-800 Shown sold separately)
18 1/8” & 32 7/8”
device dimensions
for 36” door
Detex Limited Warranty
10 Year Mechanical/3 year Electrical
Limited Manufacturer's Warranty
EX - Request to
Exit Switch
Output
(optional)
ER ELECTRIC
LATCH RETRACTION
Listings and Approvals
LISTED
LISTED
UL Listed
Panic Hardware
UBC 97, Standard 7-2 and
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
ANSI/BHMA certified A156.3
8'x10' pairs of doors
Meets NFPA 80 & 101
UL1034 - 34 Temperature Section 34
[Temperature Range from -31°F (-35°C)
Meets ADA requirements
to 150°F (+66°C)]
UL1034 - 54 Dust Section 54
for Life Safety
Meets ADA Requirements
October 22, 2012
UL10C for positive pressure
MIL-STD 810F (G), Method 509.4
(Salt Fog Test)
MIL-STD 810F (G), Method 506.4
(Driving Rain), Procedure 1
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Electric Request to Exit Switching (V50xEX)
The V50xEX Electric Request to Exit Switching device, designed for double door applications where
electric signaling is required, provides the customer with a means of signaling when the pushpad is
depressed. The EX Exit Switching monitors the pushpad and when depressed, will open or close
(SPDT) to signal an alarm, send a remote signal to monitor egress, or commence the cycle in a
separate delayed egress system.
V50xEXxHDx628xBLK
V50xRCxBG
(Optional Rod Covers and
Bolt Guard shown)
V50xEXxHDx711xBLK
Wide Stile shown, for Narrow Stile,
specify NS Option (for use on 36” and
48” doors with 2” stiles).
Benefits
• Priced to be the best value for
panic exit hardware
• Integrates with other loss
prevention equipment
• Provides reliable loss prevention
protection 24 hours a day
• Large, steel reinforced pushpad
with black ABS cover resists
damage
•Rugged, durable design reduces
maintenance
• Fits almost any door in any décor
• Patented back plate and plastic
strike locator designed for perfect
alignment with door and frame
without paper template
• Secure installation prevents costly
mistakes and enhances security
Features
• Stainless steel 3/4” deadlocking,
Pullman-type top latch bolt
• Tamper resistant housing protects
internal switching, preventing
manipulation
• Switch capable of signaling at
low currents for integration to a
central control station
• Standard SPDT (Form C) switch
with three wires, Yellow (N/O),
Brown (Common) & Green (N/C),
creating either a Normally Open or
Closed contact
• Handed, field reversible
• CD - Cylinder Dogging
• 96 - Top Surface Strike (Std.)
• HD - Hex Dogging (Std.)
• 96B - Bottom dustproof strike
• Available with 628 Base Rail
Extrusion (Std.)
• Bottom drop bolt, 5/8” dia. x 5-5/8”
long secures into strike plate
• Heavy-duty angled end cap
• Tamper-resistant switching
electronically monitors pushpad
• To shunt power to an
electromagnetic lock, specify EXV
Mechanical Options
• LD - Less Dogging
• F - 3-Hour Fire Rated
• 36 - Fits 36” Door Width (Std.)
• 48 - Fits 48” Door Width
• 84 - Fits 7’ Door Height (Std.)
• 96 - Fits 8’ Door Height
• 120 - Fits 10’ Door Height
• RC - Rod Covers (630 Brushed
Stainless)
• BG - Bottom bolt and 12” ADA
ramped cover (630 Brushed
Stainless)
• NS - Fits 2” Narrow stile glass
door
• Available with 711 Base Rail
Extrusion
• RWE - Red pushpad with white
lettering
Accessories
• SN1 - Sex Nut Fasteners
• SSK3 - Security Screw Kit
• NSK - Narrow Kit - for 2” narrow
stile glass door applications
• FC - 3’ Flex Conduit Kit, mounts to
end cap device
• Outside Trim (see Value Series
Trim Options)
• GB - Glass Bead Kits
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Stile - Fits 2" narrow stile
doors - specify NS
• Machine and Self Drilling Screws
(Std.)
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Door Stile - Fits 2-1/2” stile doors
with 99 surface strike (Std.)
• Optional Sex Nuts or Security
Torx Screws available
Dimensions
3 1/4” EXTENDED
1 3/4”
Top
Bottom
1 13/16”
18 1/8”
24 1/8”
2 3/8”
8 3/8”
5 1/4”
2 3/8”
18 1/8” & 32 7/8” device dimensions for 36” door
24 1/8” & 44 7/8” device dimensions for 48” door
1 1/2”
1 13/16”
UL Listed
Panic Hardware
Listings
and Approvals
LISTED
LISTED
2 3/8” DEPRESSED
2 3/8”
32 7/8”
44 7/8”
1 3/4”
6 1/4”
LISTED
LISTED
18 1/8”
24 1/8”
2 3/8”
2”
2 1/2” DEPRESSED
3 1/8” EXTENDED
UL Listed Fire Exit Hardware
for 3 hours, maximum
UL Listed
4'x10' single doors and pairs of
Panic Hardware
4'x8' with F90KR key removable Mullion
8 3/8”
2 7/8”
Add 2” for NS
32 7/8”
44 7/8”
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
UL Listed Fire Exit Hardware
Meets
ADA requirements
for 3 hours,
maximum
4’x10’
4'x10' single
single doors
doors and
and 8’x10’
pairs of
pairs
4'x8' 97,
withStandard
F90KR key
Mullion
UBC
7-2removable
and
UL10C for positive pressure
Meets ADA requirements
ANSI/BHMA certified A156.3
UBC 97, Standard 7-2 and
UL10CNFPA
for positive
pressure
Meets
80 & 101
for Life Safety
ANSI/BHMA certified A156.3
Miami-Dade County, Florida
NOA
Meets10-0303.02
NFPA 80 &EXP.
10104/07/15
for Life
State
ofSafety
Florida Approval FL9052
Miami-Dade
County,
Florida California
State
Fire Marshall
04/07/15
NOA 10-0303.02
4140-0127:105
& EXP.
3725-0127:108
State of Florida Approval FL9052
California State Fire Marshall 4140-0127:105 & 3725-0127:108
October 4, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Electric Request to Exit Switching (V50xEXxW)
The V50xEXxW Electric Request to Exit Switching device, designed for double door applications where
electric signaling is required, provides the customer with a means of signaling when the pushpad is
depressed. The EX Exit Switching monitors the pushpad and when depressed, will open or close
(SPDT) to signal an alarm, send a remote signal to monitor egress, or commence the cycle in a
separate delayed egress system.
V50xEXxHDx628xBLK
V50xRCxBG
(Optional Rod Covers and
Bolt Guard shown)
V50xEXxHDx711xBLK
Wide Stile shown, for Narrow Stile,
specify NS Option (for use on 36” and
48” doors with 2” stiles).
Benefits
• Priced to be the best value for
panic exit hardware
• Integrates with other loss
prevention equipment
• Provides reliable loss prevention
protection 24 hours a day
• Large, steel reinforced pushpad
with black ABS cover resists
damage
•Rugged, durable design reduces
maintenance
• Patented back plate and plastic
strike locator designed for perfect
alignment with door and frame
without paper template
• Secure installation prevents costly
mistakes and enhances security
Features
• Stainless steel 3/4” deadlocking,
Pullman-type top latch bolt
• Tamper-resistant switching
electronically monitors pushpad
• Bottom drop bolt, 5/8” dia. x 5-5/8”
long secures into strike plate
• Standard SPDT (Form C) switch
with three wires, Yellow (N/O),
Brown (Common) & Green (N/C),
creating either a Normally Open or
Closed contact
• Heavy-duty angled end cap
• Tamper-resistant housing protects
internal switching, preventing
manipulation
• Switch capable of signaling at
low currents for integration to a
central control station
• Handed, field reversible
• To shunt power to an
electromagnetic lock, specify EXV
Mechanical Options
• V51 - Top Rod Only
• 120 - Fits 10’ Door Height
• CD - Cylinder Dogging
• 96 - Top Surface Strike (Std.)
• HD - Hex Dogging (Std.)
• 96B - Bottom dustproof strike
• Available with 711 Base Rail
Extrusion
• RC - Rod Covers (630 Brushed
Stainless)
• RWE - Red pushpad with white
lettering
• LD - Less Dogging
• F - 3-Hour Fire Rated
• 36 - Fits 36” Door Width (Std.)
• 48 - Fits 48” Door Width
• 84 - Fits 7’ Door Height (Std.)
• 96 - Fits 8’ Door Height
• BG - Bottom bolt and 12” ADA
ramped cover (630 Brushed
Stainless)
• NS - Fits 2” Narrow stile glass
door
• Available with 628 Base Rail
Extrusion (Std.)
Accessories
• SN1 - Sex Nut Fasteners
• SSK3 - Security Screw Kit
• NSK - Narrow Kit - for 2” narrow
stile glass door applications
• FC - 3’ Flex Conduit Kit, mounts to
end cap device
• Outside Trim (see Value Series
Trim Options)
• GB - Glass Bead Kits
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Stile - Fits 2" narrow stile
doors - specify NS
• Machine and Self Drilling Screws
(Std.)
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Door Stile - Fits 2-1/2” stile doors
with 99 surface strike (Std.)
• Optional Sex Nuts or Security
Torx Screws available
Dimensions
3 1/4” EXTENDED
1 3/4”
Top
Bottom
1 13/16”
18 1/8”
24 1/8”
2 3/8”
8 3/8”
5 1/4”
2 3/8”
18-1/8” & 32-7/8” device dimensions for 36” door
24-1/8” & 44-7/8” device dimensions for 48” door
1 1/2”
1 13/16”
UL Listed
Panic Hardware
Listings
and Approvals
LISTED
LISTED
2 3/8” DEPRESSED
2 3/8”
32 7/8”
44 7/8”
1 3/4”
6 1/4”
LISTED
LISTED
18 1/8”
24 1/8”
2 3/8”
2”
2 1/2” DEPRESSED
3 1/8” EXTENDED
UL Listed Fire Exit Hardware
for 3 hours, maximum
UL Listed
4'x10' single doors and pairs of
Panic Hardware
4'x8' with F90KR key removable Mullion
8 3/8”
2 7/8”
Add 2” for NS
32 7/8”
44 7/8”
Detex Limited Warranty
10 Year Mechanical/3 Year Electrical
Limited Manufacturer's Warranty
UL Listed Fire Exit Hardware
Meets
ADA requirements
for 3 hours,
maximum
4’x10’
4'x10' single
single doors
doors and
and 8’x10’
pairs of
pairs
4'x8' 97,
withStandard
F90KR key
Mullion
UBC
7-2removable
and
UL10C for positive pressure
Meets ADA requirements
ANSI/BHMA certified A156.3
UBC 97, Standard 7-2 and
UL10CNFPA
for positive
pressure
Meets
80 & 101
for Life Safety
ANSI/BHMA certified A156.3
Miami-Dade County, Florida
NOA
Meets10-0303.02
NFPA 80 &EXP.
10104/07/15
for Life
State
ofSafety
Florida Approval FL9052
Miami-Dade
County,
Florida California
State
Fire Marshall
04/07/15
NOA 10-0303.02
4140-0127:105
& EXP.
3725-0127:108
State of Florida Approval FL9052
California State Fire Marshall 4140-0127:105 & 3725-0127:108
October 4, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Accessories
List of Accessories
Slide-In Filler Kits
Strikes
Through Bolt Mounting Plate
Cylinders
Cylinder Collars
Cylinder Bracket Kit
Sex Nut Kits
Tools
Security Screw Kits
Narrow Stile Door Kits
Glass Bead Kits
Battery Eliminator
Accessories
Strikes
All required strikes are provided with exit devices. Replacement strikes are available as follows:
99 Surface - non-roller
strike for V40 Series
Rim Devices
98 Semi-Mortise applied strike for V40NS
Series Rim Devices
96 Top Surface - nonroller top strike for
V50/51 Series Surface
Vertical Rod Devices
96 Bottom Dust Proof
Strike - for V50 Series
Surface Vertical Rod
Devices
Through Bolt Mounting Plate Kit for SVR
TMP1 - Through Bolt Mounting Plate Kit for use when replacing surface
vertical rods on doors that are damaged or to cover existing exterior holes
from previous device.
Kit is standard with two 630 finish plates and four 1/4-20 sex bolts.
Contact factory for other finishes.
Cylinders
MC65 Mortise Cylinder - 1-1/8"
6-pin, keyed 5-pin. Available keyed
alike or keyed differently. Finishes
available: 605, 606, 612, 613, 626
RC65 Rim Cylinder - 6-pin, keyed
5-pin. Available keyed alike or
keyed differently. Finishes available:
605, 606, 612, 613, 626
IC7 Interchangeable core cylinder
housing - 7-pin, factory installed
Cylinder Collars
Cylinder Collars for 5 and 6 pin cylinders are provided with all outside trim.
CCS 7/16" Short Cylinder Collar - Cylinder collar for 5 and 6 pin cylinders.
Finishes available: 605, 606, 612, 613, 625, 626
CCL 11/16" Long Cylinder Collar - Cylinder collar for 7 pin
interchangeable core cylinders. Finishes available: 605,
606, 611, 612, 613, 625, 626
Cylinder Bracket Kit
Sex Nut Kit
CBK - Cylinder Bracket Kit consists
of bracket and adjustable tailpiece
assembly for rim cylinder used with
other manufacturer's outside trim
SN1 - Sex Nut Kit 1/4-20 — 2 per
package
Security Screw Kits
Narrow Stile Door Kits
Contains an assortment of screw
sizes and types for securing covers
in place
Tools
HDK - Hex Dogging Key - Heavyduty with overmolded ABS, dogging
key is ergonomically designed to
resist repetitive motion injuries.
Glass Bead Kits
SSK3 - Security Screw Kit contains
all screws and driver bits to secure
the cover, end cap and the strike of
the exit device.
Additional Security Driver Tips:
TT-10 - Driver tip for 6-32 Undercut
FH screws
TT-27 - Driver tip for 1/4-20 and #14
screws
Rod Cover (V50/51 Only)
RC - Rod Covers (630
Stainless Steel)
NSK - Narrow Stile Door Kit
converts standard Value Series
panic device into narrow stile panic
device. Required when Value
Series exit devices are applied
to 36" and 48" glass doors with
minimum 2" stiles.
For use on doors with raised glass
beads. Each kit contains one 1/4"
shim set. Specify Kit number
Kit Number
GB15
For use with:
V40 Series
Bolt Guard (V50 Only)
BG - Bottom Bolt
Guard - 12” ADA
ramped cover
(630 Stainless
Steel)
(Top Rod
cover
shown)
Gate Plate
GTPLV40 - Adjustable gate plate
fits gates 32” - 52” wide. Fits
square or round gate frames.
October 22, 2012
Gate Plate Cylinder Trim
03GS - Optional 03 function
cylinder trim used on gates
(Rim cylinder sold separate)
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Accessories
Slide-In Filler Kits
Slide-In Filler Kits allow changes or additions to the device after initial installation. Specify device series and size.
SIF-VS-EB - Slide-In Filler Kit with 100-plus
decibel directional piezo alarm provides
reliable security and instantaneous alarm.
Requires mortise cylinder with standard Yale
cam (sold separately).
SIF-VS-EBxW - Slide-In Filler Kit provides
weatherized alarm for outdoor or exterior
door applications. Includes both remote
bypass and remote signaling capabilities.
Requires mortise cylinder with standard Yale
cam (sold separately).
SIF-VS-EX - The EX Slide-In Filler provides a
normally-closed or normally-open contact that
can be used for a variety of different uses.
Available in hex dogging (shown), cylinder
dogging or less dogging.
SIF-VS-EX-W - The EX-W Slide-In Filler
provides a normally-closed or normally-open
contact that can be used for a variety of
different uses in moist, outdoor or other such
applications.
SIF-VS-HD - Hex Key Dogging
Slide-In Filler Kit provides 1/8 turn
dogging and includes dogging key
with over-molded, ergonomic grip.
SIF-VS-LD - Less Dogging SlideIn Filler can be used on devices
manufactured with dogging when
this feature may no longer be
required.
August 12, 2008
SIF-VS-CD - Cylinder Dogging
Slide-In Filler Kit provides 1/8 turn
dogging. Requires mortise cylinder
with standard Yale cam (sold
separately.
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EXIT CONTROL LOCKS ACCESSORY
BE-961
Battery Eliminator
The BE-961 Battery Eliminator is designed to power security devices such as the Detex ECL-230D,
ECL-230X Series, ECL-600 battery powered series exit control locks and V40 alarmed rim exit device
without reliance on batteries. Converts AC power to DC for supplying battery-operated devices.
BE-961-1
BE-961-2
(For use with ECL products only)
Benefits
• Powers security devices without
reliance on batteries
• Eliminating the need to annually
change 9 volt batteries, saves
money, prevents unnecessary
battery disposal and creates
a greener process
• May be installed on the wall
adjacent to the protected door
quickly and easily
• 10’ Flexible armored cable
connects the battery eliminator to
the security device without
interfering with door use
• LED provides visual status of
power
• For extra security, the connecting
cable may be concealed in the
door using a continuous electric
hinge
Features
• Available Battery Eliminator Power
Supplies:
BE-961-1 = Converts 120VAC to
9VDC
Note: Powers up to three 9V
battery devices)
BE-961-2 = Converts 120VAC to
9VDC includes secure power /
supervisory loop (cutting 9V
power will sound alarm)
Note: For use with ECL products
only.
BE-961-5 = Converts 12VAC to
9VDC
Note: Conduit and transformer
sold separately
BE-961-6 = Converts 24VAC to
9VDC
Note: Conduit and transformer
sold separately
• The BE-961-2 includes an
internal alarm which sounds at
95dB if the secure power feed
wires are cut or when the ECL
unit sounds (for use with ECL
products only)
Technical Information
• 9VDC or 6VDC outputs, jumper
selectable to the security device
• 12 VAC 25 VA transformer included
- requires 120 VAC
• Line input transient suppression
is a standard feature
Dimensions
Detex Limited Warranty
• 4-5/8" wide x 4-5/8" long x
2" deep
3 Year Limited Manufacturers
Warranty
• Standard cast aluminum case
Riser Diagram
BE-961-2
BE-961-1
BE-961-1
MS-1059/1039/2049
EAX-500
Shown with ECL-230D
October 22, 2012
Shown with V40
Shown with EAX-500
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Technical Information
Technical Information Contents
Fasteners
Security Screws
Sex Bolts
Handing
Minimum Door Widths Chart
Installation
Cylinder Requirements
Mortise Cylinder Lengths
Cylinder Collars
Narrow Stile Door Kits
Technical Information
Fasteners
Door manufacturer should be consulted for proper mounting fasteners. #14 x 1-1/4 PPH sheet metal screws and
1/4-20x 1” PHP machine screws are furnished standard on all devices and strikes. Fasteners of proper length for
door thickness are furnished with devices where trims are through bolted. C and CN Pull trims are furnished with
1/4-20 through bolt for attaching bottom of pull handle.
Security Screws
For added security, pin head screws are available.
SSK3
Security Screw Kit for Rim Devices Contains:
2 MS 10/32, FH, Undercut
4 MS 6/32 FH
2 MS 1/4-20 BH
2 SMS #14 x 1” BH Type AB
4 Tamper Bits required for above
Sex Bolts
If sex bolts are required, see chart below for quantity
required for each device.
SN1 kit contains 2 each 1/4-20 bolts. Specify finish.
Function
or Trim
Rim
Devices
V40
Series
01
4
02, 03
2
08, 09
& 14
2
Handing
Technical Information
** DOOR SHOWN WITH 1/8” CLEARANCE FOR END CAP, SOME WEATHERSTRIP REQUIRES
ADDITIONAL CLEARANCE. ADDITIONAL CLEARANCE WILL REQUIRE WIDER DOORS.
Charts are based upon 5/8” frame stop, 1/8” door/frame end gap, and “99” strike standard
Minimum Door Widths/Cut Down Chart
V40 VALUE SERIES - STANDARD SILE RIM (99 STRIKE)
“X” dimension
DEVICE
CONFIGURATION
3-0 DEVICE
4-0 DEVICE
EB
33”
39”
EH
33”
39”
EI
33”
39”
EM
34-3/4”
40-3/4”
EE
34-3/4”
40-3/4”
ED
34-1/8”
40-1/8”
ER
34-3/4”
40-3/4”
ES
33”
39”
EX
29”
35”
CD
29”
35”
HD
29”
35”
LD
28-3/8”
34-3/8”
1) For single door frames with no stop, subtract 1-1/4” from minimum door width
2) For Mullion application add 7/16” to each door width
3) Standard strike for V40 Series is 99 strike, backset is 2-1/4”
4) Standard strike for V40NS Series is 98 strike with no stop, backset is 1-1/8”
Technical Information
Minimum Door Widths Cont’d
V50 VALUE SERIES - SVR WITH 5/8 STOPS, BACKSET = 1-1/8”
“X” dimension
DEVICE
CONFIGURATION
3-0 DEVICE
4-0 DEVICE
EB
32”
38”
EH
32”
38”
EI
32”
38”
EE
33-3/4”
39-3/4”
ED
33-1/8”
39-1/8”
ER
33-3/4”
39-3/4”
ES
32”
38”
EX
28”
34”
CD
28”
34”
HD
28”
34”
LD
27-3/8”
33-3/8”
1) For double door frames without stops, subtract 5/8”” from minimum door width
Installation
The patented Value Series mounting plate and strike locator system allows:
• Quick and easy installation by one person
• Accurate backset every time
• No paper templates
• Square up to door and frame made easy
Step 1
Step 2
Step 4
Step 5
Step 3
Technical Information
Cylinder Requirements
Product
Rim Cylinder
Mortise Cylinder
All Use Standard (Yale) Cam
Cylinder Dogging
X
Electrified Options
EB, EI, EM
X
All 03 Function Trims
X
X
All 08 & 09 Function Trims
03 Function Detail
Mortise Cylinder Length
All Value Series 03 Function outside trims are supplied
with a self-adjusting tailpiece that correctly fits into the
cam on the mounting plate.
The cylinder assembly in the slide-in filler
used for both the cylinder dogging and
electrified options are supplied with shims to
accommodate cylinder lengths from 7/8” to
1-1/4”.
Mortise cylinder
Tailpiece Used
Door Thickness
1-3/4" and 2" Thick Doors
2-1/4" Thick Doors
Rim cylinder tailpieces are cut to fit into this
tailpiece making the cut less critical.
08 & 09 Function Detail
Lever trims come with the adjustable tailpiece which is
attached to the escutcheon.
Cylinder Collars
See Accessories for Cylinder Collar lengths.
Technical Information
Narrow Stile Door Kits
The Detex Value Series Panic Device (V40 Series) is available in two standard lengths, 36” and 48” and is applicable
to most standard flush, medium and wide stile doors, 3’ to 4’ wide. For 2” narrow stile doors, order V40xNS.
Detex V40 Narrow Stile Door Kits
Part Number
Finish
Description
NSK1
628
Clear Anodized Aluminum
NSK2
711
Black Anodized Aluminum
Kit includes #98 semi-mortise strike, conversion pieces and instructions - See illustration below.
For meeting unexpected needs in the field the Narrow Stile Door Kit or NSK is available and converts a standard
V40 to narrow stile in less than 5 minutes. This is just another example of the flexibility of the Detex product line.
Narrow Stile Mounting Plates
Mounting Plate
V40 Series Functions
BP2
01, 02, 08, 09, 14
BP8
03 only
MULLI
ONS
Mullions
90KR - Non-Fire Rated Keyed Removable Mullion
F90KR - Fire Rated Keyed Removable Mullion
KEYED REMOVABLE MULLION
F90KR & 90KR
The Detex Key Removable Mullions are very durable, low
cost mullions designed for use with rim exit devices on
standard and fire-rated pairs of doors. The unique design
of the latching head allows the mullion to be removed in
seconds with one key turn, and then to be snapped back into
place without needing the key.
Benefits
• Mullion can be removed in
seconds with one key turn, and
easily snaps back into place
without needing the key
• Cylinder located inside the building
to prevent tampering (cylinder sold
separately)
• Simple, user-friendly operation
• Easily adapted to any double door
application
• Provides years of trouble-free
service and protection
• Easy installation, no drilling of the
mullion tube
• Easily cut to fit most any size
application (10' and smaller)
• Standard primer gray coating
allows for easy field painting
• Easy retrofit application
Features
• For use on standard and firerated pairs of doors
• Designed for heavy duty use
• Small profile base plate prevents
interference when moving objects
through doorway
• Locking head mounted to frame,
not mullion
Accessories
• SHK1 - Strike Hook Kit (Std. with
Fire Rated Mullion)
Technical Information
• 11 gauge, 2" x 3" steel mullion
tube
• Base anchors included
• Available for 7', 8' & 10' doors
• Shims provided to insure accurate
fit
Riser Diagram
Top Fitting
1 3/4
(44.5)
3 1/2
(88.9)
1 3/4
(44.5)
3 3/32
(78.7)
Top fitting has a latch that allows the
mullion to be locked back into place
without use of the key.
Cylinder Installation
Top Fitting Sub Assembly
Deadlock
Sill or Bottom Fitting
Cam
Machine Screws 8-32x3/8 PFH 100°
2 3/32
(53.3)
Rim Cylinder Back Plate
1 1/8
(28.7)
Cylinder Housing
3 3/32
(78.8)
Latch
The sill or bottom fitting has a small
footprint and, once installed, all
fasteners are hidden by the mullion
tube.
Fusible
Platform
Strike Hook Installation
DOOR
STRIKE HOOK
Rim Cylinder
STRIKE
MULLION
POST
Listings and Approvals
LISTED
UL and Warnock Hersey Listed
for 3 hour fire rated pairs of
doors up to 8’x8’
Detex Limited Warranty
3 Year Limited Manufacturers
Warranty
WHI labeled for use with other
manufacturers’ fire exit
hardware
(Call for non-Detex product
applications)
October 22, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AUTOMATI
C OPERATORS
AO19
®
AO19-1
Low Energy Automatic Door Operators for Single Doors
The AO19 Series Automatic Operator for single doors is an easy to install, heavy duty product for high
use and high abuse low energy applications. The AO19 Series meets requirements for ANSI/BHMA
A156.19 (American National Standard for Power Assist and Low Energy Power Operated Doors) and
provides standard features that meet the requirements of the American Disabilities Act.
f
AO19-1 RH Push
Shown with 21 Series
Electric Latch
Retraction (ER)
Benefits
• Economical operator provides
safe and easy access in
medium to high-traffic and
security areas
• Provides ADA compliant access
to handicap applications
• Quiet operation
• Hanger plate allows quick
installation
• Reduced service calls due to
heavy-duty construction
• Self-contained unit in an extruded
case allows easy access for
maintenance and adjustments
• 3-way low-voltage ON/OFF/HOLD
switch for ease of service and
setup
• Works with existing access control,
locking and computer signal devices
• 115VAC power plug-in mounted in
header
• Easy manual use
Features
• Available in single, pair (twin) for
independent, simultaneous and
dual egress openings
• Single voltage source required to
operate
• Electric lock switch provides a
small delay before door opens to
unlock an electric strike, maglock
or other types of electric locks
• Adjustable delayed activation for
sequenced vestibule doors
• Reverse on obstruction stalls a
door during closing cycle and
re-activates to open if an
obstruction is sensed anytime
before the latch position. Must be
selected to activate.
• Adjustable closing speed
• Push & Go (Use for Handicap)
activates when door is manually
pushed to open. Must be selected
to activate.
• Power close applies a reverse
power to aid in latch check position.
Must be selected to activate.
Mechanical Options
• LH Push - Left Hand Push
• LH Pull - Left Hand Pull
• 39.5" - Fits above most 36" doors
• RH Push - Right Hand Push
• RH Pull - Right Hand Pull
• 45.5" - Fits above most 42" doors
• 52” - Fits above most 48” doors
Accessories
• 104792 - Wireless Button
Package (includes 2 buttons, box
and receiver)
• PB-2048-3 - Mushroom switch,
hard-wired
• DS-3681-630 - Electric Strike,
cylindrical
Call for available activation
options
• PT5 - Power Transfer
• EWH8-626 - Electric Hinge
Technical Information
Power Requirements • 115VAC 60 HZ 3 amps
Module • Activation input terminals
Enclosure • 7" h x 4 1/2" d
Motor
• 115VDC rectified
• Form C lock switch terminals
• Approximately 50 lbs
• 1/8 hp
• 17 additional features standard
on board
• Safety lock-out built in
• 60:1 gearbox
• Aluminum extrusion
Listings and Approvals -
Finishes
• AL - 204-Ri Clear: Arch. Class II
anodized coating,
AA-M12C22A31
• BZ - 313-Ri Dark Bronze: Arch.
Class II Anodized coating,
AA-M12C22A32
Riser Diagram
Handing Diagram
Cerified to
ANSI/UL 325
Tested - ANSI 156.19
3166451
Meets ADA
requirements
Single Door Pull
Outside
Certified to
CAN/CSA 247-92
Outside
3-Hour Fire
Listed
AO19-1 RH Push
LH
RH
Single Door Push
20207
Detex Limited Warranty
3 Year Mechanical / 1 year Electrical
Limited Manufacturers Warranty
Outside
Outside
LH
RH
J
J-box
(sold separately)
Shown with
10 Series
Electric Latch
Retraction (ER)
Typical Application
October 22, 2012
Detex flexible conduit
with connections
(optional)
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AO19-1 (Single Door)
HINGE
SIDE
HINGE
SIDE
L
R
LS Shown
LS
AO19-1
LEFT HAND PUSH
OPERATOR
AO19-1
RS Shown
AO19-1
RS
RIGHT HAND PUSH
OPERATOR
AO19-1
LP
RP
LEFT HAND PULL
OPERATOR
RIGHT HAND PULL
OPERATOR
AO19
®
AO19-2
Low Energy Automatic Door Operators for Double Doors
The AO19 Series Automatic Operator for double doors is an easy to install, heavy duty product for high
use and high abuse low energy applications. The AO19 Series meets requirements for ANSI/BHMA
A156.19 (American National Standard for Power Assist and Low Energy Power Operated Doors) and
provides standard features that meet the requirements of the American Disabilities Act.
f
AO19-2 Push
Shown with 21 Series
Electric Latch
Retraction (ER)
Benefits
• Economical operator provides
safe and easy access in
medium to high-traffic and
security areas
• Provides ADA compliant access
to handicap applications
• Quiet operation
Features
• Available in single, pair (twin) for
independent, simultaneous and
dual egress openings
• Single voltage source required to
operate
• Electric lock switch provides a
small delay before door opens to
unlock an electric strike, maglock
or other types of electric locks
• Hanger plate allows quick
installation
• Reduced service calls due to
heavy-duty construction
• Self-contained unit in an extruded
case allows easy access for
maintenance and adjustments
• 3-way low-voltage ON/OFF/HOLD
switch for ease of service and
setup
• Works with existing access control,
locking and computer signal devices
• 115VAC power plug-in mounted in
header
• Easy manual use
• Adjustable delayed activation for
sequenced vestibule doors
• Reverse on obstruction stalls a
door during closing cycle and
re-activates to open if an
obstruction is sensed anytime
before the latch position. Must be
selected to activate.
• Adjustable closing speed
• Push & Go (Use for Handicap)
activates when door is manually
pushed to open. Must be selected
to activate.
• Power close applies a reverse
power to aid in latch check position.
Must be selected to activate.
Mechanical Options
• Push
• 75.5" - Fits above most pairs of
36" doors
• Pull
• 92" - Fits above most 44" pairs of
doors
• 100” - Fits above most 48” pairs of
doors
Accessories
• 104792 - Wireless Button
Package (includes 2 buttons, box
and receiver)
Call for available activation
options
• PB-2048-3 - Mushroom switch,
hard-wired
• DS-3681-630 - Electric Strike,
cylindrical
• PT5 - Power Transfer
• EWH8-626 - Electric Hinge
Technical Information
Power Requirements • 115VAC 60 HZ 3 amps
Module • Activation input terminals
Enclosure • 7" h x 4 1/2" d
Motor • 115VDC rectified
• Form C lock switch terminals
• Approximately 50 lbs
• 1/8 hp
• 60:1 gearbox
• 17 additional features standard
on board
Finishes
Handing Diagram
• Safety lock-out built in
• AL - 204-Ri Clear: Arch. Class II
anodized coating,
AA-M12C22A31
Twin Pull
• Aluminum extrusion
Listings and Approvals
Cerified to
ANSI/UL 325
Tested - ANSI 156.19
Outside
3166451
• BZ - 313-Ri Dark Bronze: Arch.
Class II Anodized coating,
AA-M12C22A32
Twin Push
Riser Diagram
Outside
Meets ADA
requirements
Certified to
CAN/CSA 247-92
3-Hour Fire
Listed
20207
Detex Limited Warranty
3 Year Mechanical / 1 year Electrical
Limited Manufacturers Warranty
AO19-2 Push
J-box
(sold separately)
Shown with
21 Series
Electric Latch
Retraction (ER)
Typical Application
October 22, 2012
Detex flexible conduit
with connections
(optional)
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AO19-2 (Pair of Doors)
AO19-2 Push
Shown
P
J-box
(sold separately)
Detex flexible conduit
with connections
(optional)
PS
AO19-2
Twin Push
AO19-2
PP
Twin Pull
AO19
®
AO19-3
Low Energy Automatic Door Operators for Double Egress Doors
The AO19 Series Automatic Operator for double egress doors is an easy to install, heavy duty product
for high use and high abuse low energy applications. The AO19 Series meets requirements for ANSI/
BHMA A156.19 (American National Standard for Power Assist and Low Energy Power Operated
Doors) and provides standard features that meet the requirements of the American Disabilities Act.
f
AO19-3 Dual Egress
Shown with 21 Series
Electric Latch
Retraction (ER)
Benefits
• Economical operator provides
safe and easy access in
medium to high-traffic and
security areas
• Provides ADA compliant access
to handicap applications
• Quiet operation
Features
• Available in single, pair (twin) for
independent, simultaneous and
dual egress openings
• Single voltage source required to
operate
• Electric lock switch provides a
small delay before door opens to
unlock an electric strike, maglock
or other types of electric locks
• Hanger plate allows quick
installation
• Reduced service calls due to
heavy-duty construction
• Self-contained unit in an extruded
case allows easy access for
maintenance and adjustments
• 3-way low-voltage ON/OFF/HOLD
switch for ease of service and
setup
• Works with existing access control,
locking and computer signal devices
• 115VAC power plug-in mounted in
header
• Easy manual use
• Adjustable delayed activation for
sequenced vestibule doors
• Reverse on obstruction stalls a
door during closing cycle and
re-activates to open if an
obstruction is sensed anytime
before the latch position. Must be
selected to activate.
• Adjustable closing speed
• Push & Go (Use for Handicap)
activates when door is manually
pushed to open. Must be selected
to activate.
• Power close applies a reverse
power to aid in latch check position.
Must be selected to activate.
Mechanical Options
• 75.5" - Fits above most pairs of
36" doors
• RH Typical
• LH
Accessories
• 104792 - Wireless Button
Package (includes 2 buttons, box
and receiver)
Call for available activation
options
• PB-2048-3 - Mushroom switch,
hard-wired
• DS-3681-630 - Electric Strike,
cylindrical
• 92" - Fits above most 44" pairs of
doors
• 100” - Fits above most 48” pairs of
doors
• PT5 - Power Transfer
• EWH8-626 - Electric Hinge
Technical Information
Power Requirements • 115VAC 60 HZ 3 amps
Module • Activation input terminals
Enclosure • 7" h x 4 1/2" d
Motor
• 115VDC rectified
• Form C lock switch terminals
• Approximately 50 lbs
• Safety lock-out built in
• Aluminum extrusion
• 1/8 hp
• 60:1 gearbox
• 17 additional features standard
on board
Finishes
Handing Diagram
• AL - 204-Ri Clear: Arch. Class II
anodized coating,
AA-M12C22A31
• BZ - 313-Ri Dark Bronze: Arch.
Class II Anodized coating,
AA-M12C22A32
Listings and Approvals
Cerified to
ANSI/UL 325
Tested - ANSI 156.19
RH Dual
Exterior
3166451
Meets ADA
requirements
LH Dual
Certified to
CAN/CSA 247-92
Riser Diagram
AO19-3
Interior
3-Hour Fire
Listed
20207
RH Dual Egress
Detex Limited Warranty
3 Year Mechanical / 1 year Electrical
Limited Manufacturers Warranty
Typical Application
October 22, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AO19-3 (Double Egress Doors)
HINGES
VISIBLE
AO19-3 RH Push
(Shown)
RHDE
J-box
Shown with
21 Series
Electric Latch
Retraction (ER)
Detex flexible conduit
with connections
(optional)
AO19-3
Right Hand Dual Egress Operator
HINGES
VISIBLE
AO19-3 RH Push
LHDE
J-box
Detex flexible conduit
with connections
(optional)
Shown with
21 Series
Electric Latch
Retraction (ER)
AO19-3
Left Hand Dual Egress Operator
Accessories
List of Accessories
4 1/2” Round Push Plate Switches
6” Round Push Plate Switches
4 1/2” Square Push Plate Switches
Jamb Mount Push Plate
Vestibule Push Plate
Keyswitch Push Plate Combination
Key Switch
Switch Posts
Hand-Held Transmitter
Transmitters
Multi-Mode Receivers
DH97 Presence Sensor
Swing Door Mounted Presence Sensor
AO19 Activation Switches
4 1/2” Round Push Plate Switches
The 104742-X switches combine architectural quality finishes with industrial grade components to provide
attractive and reliable automatic door activation.
-H
-HSS
-P
Benefits
• The 104742 Series push plate
switches are designed to provide
reliable activation of any automatic
door.
• Designed as a universal switch,
the 104742 Series fit single-gang
electrical boxes with no adapters
necessary.
• Durable finishes.
• Each unit is built utilizing heavy
gauge stainless steel, aircraft
quality rivets and screws.
• The most reliable microswitch in
the industry.
Features
• The 104742 Series features 4”
• 4” All Active Face Plate.
round face plates in either stainless
steel or blue powder coated
• H 4 1/2” Formed Stainless Steel
aluminum with etched and paintBack Plate.
filled legends.
• A surface mount box is also
• Includes tamper-resistant screws.
available. 104738-1025
• Rubber “Bellows” increases
weather protection (included).
• Fits single or 2-gang Electrical
Box or #104738-1025 Surface
Mount Box.
Electrical Options
• Radio Control Versions Available
Accessories
• 104738-1025 mounting box
• 104752 CP-RX Receivers
• 104753-R4 Mounting Box with
Transmitter
Where Trust is Built
Life Safety and Security Door Hardware
Technical Information
• 4” All Active Face Plate
• 4 1/2” Formed Stainless Steel Back
Plate
Riser Diagram
• UL Listed Momentary Switch,
SPDT, 15 Amp @ 125V AC
• Rubber “Bellows” increases
weather protection (included)
Listings and Approvals
American National
Standards Institute (ANSI)
Building Hardware Manufacturers
Association (BHMA) - ANSI/BHMA
A156.10 & A156.19
UL Approved Switches
Warranty
1 Year Mechanical Limited Manufacturers Warranty
Dimensions
Where Trust is Built
Life Safety and Security Door Hardware
October 30, 2012
Detex Corporation
302 Detex Drive
New Braunfels, TX 78130
PH (830) 629-2900
(800) 729-3839
FX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AO19 Activation Switches
6” Round Push Plate Switches
The 104743-X switches combine architectural quality finishes with industrial grade components to provide
attractive and reliable automatic door activation.
-H
-HSS
-P
Benefits
• The 104743 Series push plate
switches are designed to provide
reliable activation of any automatic
door.
• Designed as a universal switch,
the 104743 Series fit single-gang
electrical boxes with no adapters
necessary.
• Durable finishes.
• Each unit is built utilizing heavy
gauge stainless steel, aircraft
quality rivets and screws.
• The most reliable microswitch in
the industry.
Features
• The 104742 Series features
5 1/2” round face plates in either
stainless steel or blue powder
coated aluminum with etched and
paint-filled legends.
• Includes tamper-resistant screws.
• 5 1/2” All Active Face Plate.
• H 6” Formed Stainless Steel
Back Plate.
• A surface mount box is also
available. 104738-1030
• Rubber “Bellows” increases
weather protection (included).
• Fits single or 2-gang Electrical
Box or #104738-1030 Surface
Mount Box.
Electrical Options
• Radio Control Versions Available
Accessories
• 104738-1030 mounting box
• 104752 CP-RX Receivers
• 104753-R4 Mounting Box with
Transmitter
• 104753-STX-R6 Mounting Box
with Sequencing Transmitter
Where Trust is Built
Life Safety and Security Door Hardware
Technical Information
• 5 1/2” All Active Face Plate
• 6” Formed Stainless Steel Back
Plate
Riser Diagram
• UL Listed Momentary Switch,
SPDT, 15 Amp @ 125V AC
• Rubber “Bellows” increases
weather protection (included)
Listings and Approvals
American National
Standards Institute (ANSI)
Building Hardware Manufacturers
Association (BHMA) - ANSI/BHMA
A156.10 & A156.19
UL Approved Switches
Warranty
1 Year Mechanical Limited Manufacturers Warranty
Dimensions
Where Trust is Built
Life Safety and Security Door Hardware
October 30, 2012
Detex Corporation
302 Detex Drive
New Braunfels, TX 78130
PH (830) 629-2900
(800) 729-3839
FX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AO19 Activation Switches
4 1/2” Square Push Plate Switches
The 104755-X switches combine architectural quality finishes with industrial grade components to provide
attractive and reliable automatic door activation.
104755
-H
-HSS
-W
-WSS
-P
Benefits
• The 104755 Series push plate
switches are designed to provide
reliable activation of any automatic
door.
• Designed as a universal switch,
the 104755 Series fit single-gang
or 2-gang electrical boxes with no
adapters necessary.
• Durable finishes.
• Each unit is built utilizing heavy
gauge stainless steel, aircraft
quality rivets and screws.
• The most reliable microswitch in
the industry.
Features
• The 104755 Series features 4”
square face plates in either
stainless steel or blue powder
coated aluminum with etched and
paint-filled legends.
• Includes tamper-resistant screws.
• 4” x 4” All Active Face Plate.
• H 4 1/2” x 4 1/2” Formed Stainless
Steel Back Plate.
• A surface mount box is also
available. 104738-1020
• Rubber “Bellows” increases
weather protection (included).
• Fits single or 2-gang Electrical
Box or #104738-1015 Surface
Mount Box.
Electrical Options
• Radio Control Versions Available
Accessories
• 104738-1015 mounting box
• 104792 Complete Wireless Button
Package
•104738-1020 Mounting Box
• 104752 CP-RX Receivers
• 104753 Mounting Box with
Transmitter
• 104786-X Wireless Vestibule
Sequencing Package
Where Trust is Built
Life Safety and Security Door Hardware
Technical Information
• 4” x 4” All Active Face Plate
• 4 1/2” x 4 1/2” Formed Stainless
Steel Back Plate
Riser Diagram
• UL Listed Momentary Switch,
SPDT, 15 Amp @ 125V AC
• Rubber “Bellows” increases
weather protection (included)
Listings and Approvals
American National
Standards Institute (ANSI)
Building Hardware Manufacturers
Association (BHMA) - ANSI/BHMA
A156.10 & A156.19
UL Approved Switches
Warranty
1 Year Mechanical Limited Manufacturers Warranty
Dimensions
Where Trust is Built
Life Safety and Security Door Hardware
October 30, 2012
Detex Corporation
302 Detex Drive
New Braunfels, TX 78130
PH (830) 629-2900
(800) 729-3839
FX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AO19 Activation Switches
Jamb Mount Push Plate
The 104739-X Jamb Mount switches combine architectural quality finishes with industrial grade components to
provide attractive and reliable automatic door activation.
-H
-P
-HSS
-W
-WSS
Benefits
• The 104739 Series push plate
switches are designed to provide
reliable activation of any automatic
door.
• Each unit is built utilizing heavy
gauge stainless steel, aircraft
quality rivets and screws.
• Designed as a universal switch,
the 104739 Series fits 1 3/4”
Frame or 104738-1010,
104753-J Surface Mount Box with
no adapters necessary.
• Durable finishes.
• 1 1/2” x 4 1/2” All Active Face
Plate.
• Rubber “Bellows” Increases
Weather Protection (included).
• The most reliable switch in the
industry.
Features
• The 104739 Series features
1 1/2” x 4 1/2” face plates in either
stainless steel or blue powder
coated aluminum with etched and
paint-filled legends.
• 1 11/16” x 4 1/2” Formed Stainless
Steel Back Plate.
• Includes tamper-resistant screws.
Electrical Options
• Radio Control Versions Available
Accessories
• 104738-1010 mounting box
• 104752 CP-RX Receivers
• 104753-J Mounting Box with
Transmitter
Where Trust is Built
Life Safety and Security Door Hardware
Technical Information
• 1 1/2”x 4 1/2” All Active Face Plate
• 1 11/16” x 4 1/2” Formed Stainless
Steel Back Plate
Riser Diagram
• UL Listed Momentary Switch,
SPDT, Mom., 15 Amp @ 125V AC
• Rubber “Bellows” Increases
Weather Protection (included)
Listings and Approvals
American National
Standards Institute (ANSI)
Building Hardware Manufacturers
Association (BHMA) - ANSI/BHMA
A156.10 & A156.19
UL Approved Switches
Warranty
1 Year Mechanical Limited Manufacturers Warranty
Dimensions
Where Trust is Built
Life Safety and Security Door Hardware
October 30, 2012
Detex Corporation
302 Detex Drive
New Braunfels, TX 78130
PH (830) 629-2900
(800) 729-3839
FX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AO19 Activation Switches
Vestibule Push Plate
The 104744-X Vestibule switches combine architectural quality finishes with industrial grade components to
provide attractive and reliable automatic door activation.
-H
-P
-HSS
Benefits
• The 104744 Series push plate
switches are designed to provide
reliable activation of any automatic
door.
• Designed as a universal switch,
the 104744 Series fits 2-gang
Electrical Box or Surface Mount
Box 104738-1015, 104753-V with
no adapters necessary.
• Durable finishes.
• Each unit is built utilizing heavy
gauge stainless steel, aircraft
quality rivets and screws.
• The most reliable microswitch in
the industry.
Features
• The 104744 Series features
• 2 1 1/2” x 4 1/2” All Active Face
2 1 1/2” x 4 1/2” face plates in
Plates
either stainless steel or blue powder
coated aluminum with etched and
• 4 1/2” x 4 1/2” Formed Stainless
paint filled legends.
Steel Back Plate.
• Rubber “Bellows” increases
weather protection (included).
• Includes tamper-resistant screws.
Electrical Options
• Radio Control Versions Available
Accessories
• 104738-1015 mounting box
• 104752 CP-RX Receivers
• 104753-V Mounting Box with
Transmitter
Where Trust is Built
Life Safety and Security Door Hardware
Technical Information
• 2 1/2” x 4 1/2” All Active Face
Plate.
• UL Listed Momentary Switch,
SPDT, 15 Amp @ 125V AC
• Rubber “Bellows” increases
weather protection (included)
• 4 1/2” x 4 1/2” Formed Stainless
Steel Back Plate
Riser Diagram
Listings and Approvals
American National
Standards Institute (ANSI)
Building Hardware Manufacturers
Association (BHMA) - ANSI/BHMA
A156.10 & A156.19
UL Approved Switches
Warranty
1 Year Mechanical Limited Manufacturers Warranty
Dimensions
Where Trust is Built
Life Safety and Security Door Hardware
October 31, 2012
Detex Corporation
302 Detex Drive
New Braunfels, TX 78130
PH (830) 629-2900
(800) 729-3839
FX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AO19 Activation Switches
Keyswitch Push Plate Combination
The CS-4730 Series heavy-duty keyswitches are used to momentarily activate low-voltage electrical devices or
turn them on/off. They are commonly used to turn an operator or any activation device on and off and provide for
secure activation of an automatic door.
Benefits
• The CS-4730 Series push plate
switches are designed to provide
reliable activation of any automatic
door.
• Rubber bellows included for push
plate switch for weather protection.
• Wiring is made simple with a
pluggable wiring harness.
• The CS-4730 Series fit 2-gang
electrical boxes with no adapters
necessary.
• The keyswitch and push plate
switch can be set up to work
independently, or the cylinder can
be used as an economical way
to secure the push plate switch in
after-hours applications.
Features
• The CS-4730 combo switches
feature a key cylinder along with a
104739 faceplate.
• Includes tamper-resistant screws.
• Operates with 1 1/8”-1 1/4” mortise
cylinder with Adams-Rite cam.
Electrical Options
• Radio Control Versions Available
Accessories
• 104739-HSS Push Plate
•104739-WSS Push Plate
• 104739-H Push Plate
• Fits 2-gang Electrical Box or
104738-1015 Surface Mount Box
Where Trust is Built
Life Safety and Security Door Hardware
Technical Information
• 4” x 4” All Active Face Plate
• 4 1/2” x 4 1/2” Formed Stainless
Steel Back Plate.
• UL Listed Momentary Switch,
SPDT, 15 Amp @ 125V AC
• Rubber “Bellows” increases
weather protection (included)
Listings and Approvals
Riser Diagram
American National
Standards Institute (ANSI)
Building Hardware Manufacturers
Association (BHMA) - ANSI/BHMA
A156.10 & A156.19
UL Approved Switches
Warranty
1 year Limited Manufacturers Warranty
Dimensions
Where Trust is Built
Life Safety and Security Door Hardware
(Mortised Cylinder Not Included)
October 31, 2012
Detex Corporation
302 Detex Drive
New Braunfels, TX 78130
PH (830) 629-2900
(800) 729-3839
FX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AO19 Activation Switches
Keyswitch
When used with automatic doors, the 105369 Series keyswitches can be used to turn an operator or any
activation device on and off. The 105369 keyswitches are a simple way to provide secure activation of any
automatic door.
Benefits
• The 105369 fits Single-gang,
2-gange Electrical Boxes or
Surface Mount Box #104738-1015
and #104738-1035.
• The 105369 Series keyswitches
are available with a
maintained (105369-1) or
momentary (105369-2) contact
switch.
Features
• The heavy duty switch bracket
features a switch activator dead
stop which prevents the key
cylinder from damaging a single
switch.
• Pluggable wiring harness.
• Operates with 1 1/8” to 1 1/4”
mortise cylinder with Adams-Rite
cam (available separately)
• Available in single gang style:
105369-5 maintained, 105369-6
momentary.
• Available in narrow style:
105369-3 maintained,
105369-4 momentary.
Electrical Options
• Radio Control Versions Available
Accessories
• 104738-1015 mounting box
• 104738-1035 2” Deep Mounting
Box
Where Trust is Built
Life Safety and Security Door Hardware
Technical Information
• UL Listed Momentary Switch,
SPDT, 15 Amp @ 125V AC
Dimensions
• Adjustable mounting holes help
“Plumb and Square” key switch
Listings and Approvals
American National
Standards Institute (ANSI)
Building Hardware Manufacturers
Association (BHMA) - ANSI/BHMA
A156.10 & A156.19
UL Approved Switches
Warranty
3 Year Mechanical Limited Manufacturers Warranty
Where Trust is Built
Life Safety and Security Door Hardware
October 30, 2012
Detex Corporation
302 Detex Drive
New Braunfels, TX 78130
PH (830) 629-2900
(800) 729-3839
FX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AO19 Activation Accessories
Post
The 105380-X and 105396-X Series Switch Posts are designed to provide a freestanding self-contained door
activation device that can be installed at any location.
Benefits
• Attractive and built to withstand
the toughest conditions.
• The 105396 Series posts are
made of 5” square tubular steel
that is 1/8” thick.
• The durable LongLife™ Finish
protects against rust and consists
of two coats: a zinc rich base coat
on all surfaces and an industrial
grade exterior powder coat finish.
• The integral plastic cap allows
superior wireless signal range.
• An innovative ABS plastic rust
shield fits under the mounting
shoe to help block the corrosive
action of concrete to steel contact.
• Durable Exterior Grade LongLife™
Finish with Rust Shield in Gray or
Dark Bronze.
Features
• The 105380 Series Posts come
standard with a single switch
cutout.
• Interchangeable Surface and
Inground Mounting Shoes or
External Surface Mounting Foot
available.
• The 105396 Series post is available
• All versions can be ordered
with 2 switch cutouts.
for either hardwired or wireless
operation.
• Microswitch includes Rubber
Bellows for added weather
protection.
Electrical Options
• 104753-P Post Transmitter
• Surface Mount with Internal Shoe.
105380-1: Aluminum Concealed
105380-2: Bronze Concealed
105396-1: Aluminum Concealed
105396-2: Bronze Concealed
• Inground Mount.
105380-3: Aluminum Staked
105380-4: Bronze Staked
• Surface Mount with External Shoe.
105380-5: Aluminum Exposed
105380-6: Bronze Exposed
105396-5: Aluminum Exposed
105396-6: Bronze Exposed
• 104753-STX-P Sequencing Post Transmitter
Where Trust is Built
Life Safety and Security Door Hardware
Technical Information
• Rubber “Bellows” increases
weather protection (included)
• Physical Size 5”W x 5”D x 42”H
Listings and Approvals
Riser Diagram
Building Hardware Manufacturers
Association (BHMA) - ANSI/BHMA
A156.10 & A156.19
Warranty
1 Year Limited Manufacturers Warranty
Dimensions
Where Trust is Built
Life Safety and Security Door Hardware
Surface Mount with
Internal Shoe
October 4, 2012
Surface Mount with
External Shoe
Inground Mount
Detex Corporation
302 Detex Drive
New Braunfels, TX 78130
PH (830) 629-2900
(800) 729-3839
FX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AO19 Activation Accessories
Hand-Held Wireless Transmitter
The 104737 Wireless Transmitter provides the most reliable wireless activation of automatic doors available.
Benefits
• The hand-held micro-transmitters
are small enough to wear as a
necklace, yet have large, easy to
activate buttons.
• The transmitter can also be used
interchangeably with other
Manufacturer’s products that
operate on its frequencies as well.
Features
• Utilizes Proprietary High Definition
Radio Control™ (HDRC™) for
unsurpassed signal transmission
clarity
• Three user selectable frequencies
available in single unit: HDRC™,
300 MHz, 390 MHz.
• FCC license for all three
frequencies.
• SignalLock™ guarantees signal
transmission when push plate is
pressed.
• One 104737-1 (CP/TX-HH1)
and Two 104737-2 (CP/TX-HH2)
buttons available.
• Power saving circuitry extends
battery life.
• Compact overall size with large
activation buttons.
• Integrated signal radiating antenna
boosts signal strength.
• The 104737 CP/TX can transmit
three different frequencies.
Electrical Options
• 104737-1 Hand-held Transmitter - 1 • 104737-2 Hand-held Transmitter - 2
button
button
Accessories
• 104752 Multi-mode Dual Receiver
• 104752-RXM Multi-Mode Receiver
with RXM
Where Trust is Built
Life Safety and Security Door Hardware
Technical Information
• Temperature Range: -4°F to 140°F
(-20°C to 60°C)
• 390 MHz: Compatible with MS
SEDCO and GENIE™ products
• Physical Size 2”W x 3/4”D x 2
3/4”H
• 300 MHz: Compatible with
Multicode™ products
Dimensions
Listings and Approvals
American National
Standards Institute (ANSI)
Building Hardware Manufacturers
Association (BHMA) - ANSI/BHMA
A156.10 & A156.19
FCC
US Patent 7,545,833
Warranty
1 Year Limited Manufacturers Warranty
Where Trust is Built
Life Safety and Security Door Hardware
October 30, 2012
Detex Corporation
302 Detex Drive
New Braunfels, TX 78130
PH (830) 629-2900
(800) 729-3839
FX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AO19 Activation Accessories
Transmitters
The 104753 Transmitter provides the most reliable wireless activation of automatic doors available.
104753 - 4” Box/Transmitter
104753-R4 - 4” Round Box/Transmitter
104753-R6 - 6” Round Box/Transmitter
104753-J Jamb Mount Box/Transmitter
Benefits
• The 104753 transmitter comes
prewired and installed with battery
in a surface mount box, making
installation quick and easy.
• The 104753 can also be used
interchangeably with other
Manufacturer’s products that
operate on its frequencies as well.
• The 104753 can transmit three
different frequencies.
• FCC License for all three
frequencies.
• Radiating antenna boosts signal
strength.
• SignalLock™ guarantees signal
transmission when push plate
switch is pressed.
• Transmitter and battery factory
prewired and installed in mounting
boxes.
• Power saving circuitry extends
battery life.
• Powered by standard 9V battery.
• 104753-Vestibule Dual Transmitter
• 104753-STX 4” Square
Sequencing Transmitter
• 104753-STX-P Sequencing Post
Transmitter
• 104753-STX-R4 Round 4” Box/
Sequencing Transmitter
• 104753-STX-R6 Round 6” Box/
Sequencing Transmitter
Features
• Utilizes Proprietary High Definition
Radio Control™ (HDRC™) for
unsurpassed signal transmission
clarity.
• Three User selectable frequencies
available in single unit: HDRC™,
300 MHz, and 390 MHz.
• Quick battery access.
Electrical Options
• 104737-1 Handheld Transmitter 1 button
• 104737-2 Handheld Transmitter 2 buttons
• 104753-P Post Transmitter
Where Trust is Built
Life Safety and Security Door Hardware
Accessories
• 104752 Multi-Mode Dual Receiver
• 104739 Jamb Mount Push
Plate (used with 104753-J Box/
Transmitter)
• 104752-RXM Multi-Mode Receiver
with RXM
• 104742 4 1/2” Round Push
Plate (used with 104753-R4,
104753-STX-R4)
• 104744 Vestibule Double Push
Plate (used with 104753-V Box/
Transmitter)
• 104743 6” Round Push
Plate (used with 104753-R6,
104753-STX-R6)
• 104755 4 1/2” Square Push Plate
(used with 104753, 104753-STX)
• 300 MHz: Compatible with
Multicode™ products
• Physical Size: 2 1/4”W x 2 1/4”D
x 2”H
• 390 MHz: Compatible with MS
SEDCO and GENIE™ products
• Weight: 1.46 lbs. (663g)
Technical Information
• Power Requirements: 9V Battery
• Temperature Range -4°F to 140°F
(-20°C to 60°C)
Dimensions
Warranty
1 Year Mechanical Limited Manufacturer’s
Warranty
Listings and Approvals
FCC
US patent 7,545,833
104753
Building Hardware Manufacturers
Association (BHMA) - ANSI/BHMA
A156.10 & A156.19
(Pictured with 104755-HSS - Sold Separately)
Where Trust is Built
Life Safety and Security Door Hardware
October 3, 2012
Detex Corporation
302 Detex Drive
New Braunfels, TX 78130
PH (830) 629-2900
(800) 729-3839
FX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AO19 Activation Accessories
Multi-Mode Wireless Receiver
The 104752 Wireless Receiver provides the most reliable wireless activation of automatic doors available.
Benefits
• Utilizes Proprietary High Definition Radio Control™ (HDRC™) for unsurpassed signal transmission clarity.
Features
• The 104752 can also be
used interchangeably with other
manufacturer’s products that
operate on its frequencies.
• The 104752 accepts three
different frequences: HDRC,
300MHz, 390MHz.
• 104752 can be easily programmed
to become a timer, dual receiver
or a sequencing receiver.
• Mode 3*: Dual Channel Receiver
• Mode 5**: Receiver with Ratchet
Relay
Electrical Options
• Mode 1: Standard Receiver
(factory setting)
• Mode 2: Receiver with Adjustable
Time Delay
• Mode 4*: Receiver With
Sequenced Outputs
*Modes 3 & 4 require the RXM Add-On Module. This Module plugs directly onto the CP/RX main circuit board and
provides a second output.
**Mode 5 requires the RXR Add-On Module. The Module plugs directly onto the CP/RX main circuit board and
allows for initial signal to hold relay closed until a second signal is received.
Where Trust is Built
Life Safety and Security Door Hardware
Technical Information
• Power Requirements: 12V to 24V
AC or DC
• Temperature Range: -22°F to
158°F (-30°C to 70°C)
• 390 MHz: Compatible with MS
SEDCO and GENIE™ products
• Relay Contact Rating: 3 amp @
24V AC
• Weight: <0.25 lbs.
• Physical size: 4”L x 2”W x1”H
• 300 MHz: Compatible with
Multicode™ products
Dimensions
Listings and Approvals
American National
Standards Institute (ANSI)
Warranty
1 Year Limited Manufacturers Warranty
Building Hardware Manufacturers
Association (BHMA) - ANSI/BHMA
A156.10 & A156.19
FCC
US patent 7,545,833
October 30, 2012
Where Trust is Built
Life Safety and Security Door Hardware
Detex Corporation
302 Detex Drive
New Braunfels, TX 78130
PH (830) 629-2900
(800) 729-3839
FX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AO19 Safety Presence Sensor
FRM-AI Presence Sensor
The 104790 sensor is a 4-row presence sensor designed to provide safety protection for all types of automatic
doors. The 104790 is based upon the most reliable active infrared (AI) technology available - Floor Reflection
Method (FRM).
Benefits
• One sensor covers any safety
zone application.
• There is no lens or zone masking
required.
• SafePath Maximum Pattern
Infrared (MPI™) sensors
use more beams than other
manufacturers and provide a
level of safety not found in other
standalone infrared sensors.
• The pattern width and depth are
both mechanically adjustable. In
addition the depth can be altered
electronically from 5 to 2 rows.
• All adjustments are available
without the use of proprietary setup devices.
Features
• Mount up to 10’ (3m) high.
• Electronic depth adjustment
from 1 to 4 rows (also 0° to 10° tilt
settings)
• Mechanical width settings (from
36” to over 7’)
• Quick-connect wiring (harness
included)
• Up to 32 detection zones.
• Four Presence Timer and
frequency settings
• Sensitivity Adjustment Variable
(via potentiometer)
Accessories
• Cable: 10 ft. (3m)
• Rain cover available (contact
factory)
Where Trust is Built
Life Safety and Security Door Hardware
Technical Information
• Temperature Range: -4°F to 140°F
(-20°C to 60°C)
• 12V to 24V AC or DC operation
• Form C Dry Relay Contact (N.O.,
COM, N.C.)
• Weight: approx. 0.8 lbs. (0.35 kg)
0.39” (10mm)
Wiring Hole
Dimensions
0.39” (10mm)
Wiring Hole
Listings and Approvals
Mounting Pitch
2.96” (75mm)
American National
Standards Institute (ANSI)
2.96” (75mm)
1.57”
(40mm)
Building Hardware Manufacturers
Association (BHMA) - ANSI/BHMA
A156.10
2.95”
(75mm)
Enclosure Rating IP54 (IEC60529)
6.30” (160mm)
10.24” (260mm)
CE
2.95”
(75mm)
Warranty
1 Year Mechanical Limited Manufacturers Warranty
1.69”
(43mm)
Where Trust is Built
Life Safety and Security Door Hardware
October 30, 2012
Detex Corporation
302 Detex Drive
New Braunfels, TX 78130
PH (830) 629-2900
(800) 729-3839
FX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AO19 Safety Presence Sensor
Swing Door Mounted Presence Sensor
The Detex 105395 is a door-mounted presence sensor designed to provide safety protection for any swing,
bi-fold, revolving and low-energy automatic doors.
Benefits
• The presence sensor mounts
on either side or both sides of a
door panel, depending upon the
application.
• On swing doors, while the door
is opening, the presence sensor
will sense and protect a person in
its path and either slow or stop the
door.
• When the door is closing, the
presence sensor will sense a
person in its path and reopen the
door.
• The presence sensor combines
the most reliable active infrared
technology available with Position
Sensitive Detection (PSD)
technology found in auto-focus
cameras to ensure the precise
pedestrian detection within the
path of a moving door panel.
• The detection area width can be
increased by inserting additional
PSD sensor modules into the
34 1/2” long extruded aluminum
housing.
• The presence sensor mounts near
the top of the door panel out
of harm’s way. PSD sensor
technology automatically focuses
the sensor lenses to dipswitchcontrolled height settings.
• Each sensor module’s
detection zone can be adjusted
independently.
Features
• Detection Method: Active Infrared
with Position Sensitive Detection
(PSD)
• Detection Range: 0’-7’10” (0-2.4m)
• Range Adjustment: 4’7” (1.4m),
5’3” (1.6m), 5’11” (1.8m), 6’7”
• Max. Installation Height: 8’6” (2.6m) (2.0m), 7’3” (2.2m), 7’10” (2.4m)
• Beam Angle Adjustment: 5°, 10°,
15°, 20°, 25°
• Power Supply: 12-24 VAC or VDC
± 10%
• Presence Timer: Infinity
Accessories
• The 105395-1 contains a single
• The 105395-2 contains two PSD
• The 105395-3 contains three PSD
PSD sensor module and is ideal for
sensor modules, doubling detection sensor modules for the highest
low-energy doors.
capability and providing safety for
level of safety.
full energy doors.
Where Trust is Built
Life Safety and Security Door Hardware
Technical Information
• Power Consumption (per sensor
module): AC12V-1.1VA, DC12V60mA, AC24V-1.6VA, DC24V35mA
• Weight: 1.8 lbs. (0.8kg)
Riser Diagram -
• Output contact: Form C Relay;
DC50V 0.1A Non Voltage 1C
• Response time: <50ms
• Temperature Range: -4°F to 140°F
(-20°C to 60°C)
• Delay Hold Time: 0.5, 1, 2, 4.5 sec
Listings and Approvals
American National
Standards Institute (ANSI)
Building Hardware Manufacturers
Association (BHMA) - ANSI/BHMA
A156.10, A156.19, A156.27
Warranty
1 Year Mechanical Limited Manufacturers Warranty
Dimensions
Where Trust is Built
Life Safety and Security Door Hardware
October 31, 2012
Detex Corporation
302 Detex Drive
New Braunfels, TX 78130
PH (830) 629-2900
(800) 729-3839
FX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EXIT CONTROL LOCKS
ECL-230D, ECL-230D-PH
Exit Control Hardware
The ECL-230 is a code compliant, battery alarmed, rugged dead bolt, panic device with steel plate
and photo-luminescent sign providing managed security and a 100 decibel alarm for secondary
exits.
ECL-230D - Short Bar
Also Available in Gray
(Cylinder and bar guard
sold separately)
ECL-230D-PH - Long Bar
Also Available in Gray
(Cylinder and bar guard
sold separately)
Benefits
• Attack resistant design
withstands over 2200 lbs.
of outside pull force
• Proven durability and reliability
at a reasonable price
• Easy to install
• Easy to see if the lights go out
• Time tested construction resists
attack from the inside
• Straightforward operation that
everyone understands
• Accepts 5-pin through 7-pin
standard and interchangeable
core rim cylinders
• Non-handed
• Reduces employee and
customer theft
Features
• Single point, 1" throw dead bolt
• Saw resistant dead bolt
• Corrosion resistant allow lock
body
• 100 decibel alarm, powered by
9-volt battery (included)
Mechanical Options
• Gray Finish (Std.)
• Black Finish (BK)
• English Push Plate Sign (Std.)
• Durable steel plate with photo
luminescent sign absorbs light
to then "glow in the dark" when
lights are dimmed
• Other Languages available
(call factory for details)
• For Panic Hardware on 36" doors
see ECL-230D-PH
• Locking and unlocking the
dead bolt always arms and
disarms the alarm
• Resetting the alarm can only be
accomplished with a control key
• Fire-Rated Option see ECL-600
• ECL-437K - Surface Strike (Std.)
Accessories
• ECL-436K for ECL-230D,
ECL-2100K for ECL-230D-PH Bar Guard Kit - to protect end of
bar, when required by code
• RC65 - Rim Cylinder, Schlage
"C" Keyway with 2 keys
• ECL-1595 - Cylinder Collar
required for 6 or 7 pin cylinders
• BE-961 - Hard wired Conversion
Kit, eliminates battery
• VRA-143 - Vertical Rod Assembly
provides 2 point locking (see
VRA-143 product sheet)
• ECL-435K - Adjustable Surface
Keeper Bracket for some double
door applications
• ECL-475 - Decorative back plate
for use on narrow stile doors
Technical Information
• Door Types - Wood, Hollow Metal
or Aluminum
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Minimum standard door width for
ECL-230D is 20"
• Minimum standard door width for
ECL-230D-PH is 34"
Riser Diagram
• Double Door requirements:
(1) ECL-230
(1) RC65
(1) ECL-435K
or (1) VRA-143
(1) DDH-2250
or
(2) ECL-230D
(2) RC65
(1) 90KR
}
• Door Stile - Fits minimum 5-3/4"
with ECL-437K Strike (Std.)
• Door Stile - Fits minimum 1-7/8"
with ECL-475 Kit
• Machine and Sheet Metal Screws
(Std.)
• Optional Sex Nuts or Security
Torx Screws Available
Dimensions
Front View
<
10 3/8”
10 3/8”
<
Single Door
Listings and Approvals
Double Doors
with DDH-2250
Double Door Holder
Adjustable Keeper (ECL-435K)
LISTED
Meets ADA requirements
{ Only ECL-230D-PH
ANSI/BHMA
requirements for all
Building Codes
California State Fire Marshall 4140-0127:102
October 22, 2012
Detex Limited Warranty
10 Year Limited Manufacturers
Warranty
UL Listed
Panic Hardware
988N-Grade 3
Meets NFPA 101
for Life Safety,
CA Title 19
&
Double Doors
with Key Removable Mullion
Vertical Rod Assemblies also
available (Part #VRA-143)
< 3 3/4”>
>
>
12 7/8”
ECL-230D
24 1/8”
ECL-230D-PH
>
< 5 3/4” ><
Side View
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
NOTE: * = default
Contact factory for availability
of combined options
TRIM PLATE
* “__” =
03T = Trim Plate with OKC / $105
01T = Trim Plate without OKC / $75
03PP = Pull Plate with OKC / $75
01PP = Pull Plate without OKC / $75
Example Order Number
ECL-230X
CYLINDER
DEVICE FINISH
* “__” = Grey
only
DOOR WIDTH
* “__” = Fits 3-0 / 4-0 x 7-0
30 = Fits 30” Wide Door / $65
July 2, 2012
ECL-230D RETROFIT KIT
* “__” =
RK = ECL-230D RetroFit Kit / $32
(End-cap plate and lock-body plate)
ACCESSORIES
* “__” =
SN1 = Sex Nut Kit / $14 per kit
Signage - Language
* “__” =
RWS = Spanish Sign
RWHK = Chinese Sign
(Red & White)
ROD COVERS (TB, TD, TDB ONLY)
* “__” =
RC = Rod Covers / $190
BG = Bottom Bolt Guard / $110
RC-BG = Rod Covers &
Bottom Bolt Guard /$300
COVER SECURITY
* “__” =
CL = Cover Lock / $20
SS = Security Screws / $21
CL-SS = Cover Lock &
Security Screws / $41
STRIKE
* “__” =
96B = Dust Proof Strike (for TB &
TDB only) / $36
DDSK = Double Door Strike Kit / $80
96B-DDS = Dust Proof Stike & Double Door
Strike (for TDB only) / $123
DOOR HEIGHT (TB, TD, TDB ONLY)
* 84” = Fits 6’8” to 7’ Door
96” = Fits 7’ to 8’ Door
120” = Fits 8’ to 10’ Door / $50
* “__” =
IC7 = Interchangeable core housing
installed in Lock & or Trim / $60
IK7 = InstaKey Cylinder installed in
Lock & or Trim / $60
C65 = Cylinder installed in Lock &
or Trim / $60
INSIDE PULL
* “__” =
IP = Inside Pull / $31
HINGE BOLTS
* “__” =
DX1 = Single Hinge Bolt / $44
DX2 = Double Hinge Bolts / $82
DX3 = Triple Hinge Bolts / $116
DEVICE CONFIGURATION
* “__” = Single Point Deadbolt only / $480
-TD = 2 point Top Bolt & Deadbolt / $370 add
-TB = 2 point Top Bolt & Bottom Bolt / $550 add
-TDB = 3 point Top Bolt, Deadbolt & Bottom Bolt / $615 add
W = Weatherized, Single Point Deadbolt only / $200 add
W-TD = Weatherized, 2 point Top Bolt & Deadbolt / $570 add
W-TB = Weatherized, 2 point Top Bolt & Bottom Bolt / $750 add
W-TDB = Weatherized, 3 point Top Bolt, Deadbolt & Bottom Bolt / $815 add
ECL-230X HOW TO ORDER
(Includes Summary Descriptions)
EXIT CONTROL LOCKS
ECL-230X (Dead Bolt)
Exit Control Hardware
The ECL-230X is
a code compliant,
battery alarmed,
rugged dead bolt,
panic device with
photo-luminescent
sign providing
maximum security
and a 100 decibel
alarm for secondary
exits.
ECL-230X
Shown with
Optional
Inside Pull
(specify IP)
4” maximum
projection off face
of door
End Cap
Benefits
• Attack resistant design
for maximum holding force
• Reduces employee and
customer theft
• Proven durability and reliability
at a reasonable price
• Time tested construction resists
attack from the inside
• Easy to install
• One size fits 36”-48” doors for
code compliant acceptance
• Straightforward operation that
everyone understands
• Accepts 5-pin through 7-pin
standard and interchangeable
core rim cylinders without using
cylinder collar
• Non-handed
Features
• Dead bolt lock -1” throw with just
over 3/4” engagement with the
frame
• Saw resistant dead bolt
• Corrosion resistant alloy lock body
• 100 decibel alarm, powered by
9-volt battery (included)
• Durable photo-luminescent sign
absorbs light to then "glow in the
dark" when lights are dimmed
• Surface/flush reversible strike
• Locking and unlocking (dead bolt)
always arms and disarms the alarm
Mechanical Options
• Gray Finish (Std.)
Note: Contact factory for additional
finishes
• DX1 - Add hinge side protection
with one hinge bolt for 2 locking
points (3/4” frame engagement)
• English Push Plate Sign (Std.)
• 30 - Fits 30” wide door
• DX2 - Add hinge side protection
with two hinge side bolts for 3
locking points (3/4” frame
engagement)
• DX3 - For maximum hinge side
protection add three hinge side
bolts for 4 locking points
(3/4” frame engagement)
• For additional security with 4
locking points, specify
ECL-230X-DX3
• Easy to see if the lights go out
• Low profile meets International
Building Code requirement
allowing for 4” maximum projection
off face of door
• Resetting the alarm can only be
accomplished with a control key
• For 9VDC hardwiring add
BE-961-1 or BE-961-2
• RWS - Spanish Sign
• Other Languages available
(call factory for details)
Mechanical Options Continued
• IK7R - InstaKey Cylinder installed
in Lock & or Trim
• 03T - Trim Plate
• 03PP - Pull Plate
Rim cylinder required for 03 Trims
(sold separately)
• RC65 - Rim Cylinder, Schlage
“C” Keyway with 2 keys installed
in Lock & or Trim
• 01T - Trim Plate
• IP - Inside Pull
• 01PP - Pull Plate
• DDSK - Double Door Strike Kit
• IC7R - Interchangeable core
housing installed in Lock & or Trim
• SN1 - Sex Nut Kit
• SS - Security Screws
• CL-SS - Cover Lock & Security
Screws
• RK - ECL-230D RetroFit Kit
(End-cap plate & lock-body plate)
• BE-961 - Hardwired Conversion
Kit, eliminates battery
(Sold Separately)
• CL - Cover Lock (Standard on TB
configuration)
Technical Information
• Door Types - Wood, Hollow Metal
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Standard Device fits 36”-48” door
• Optional Device fits 30”-36” door
• Double Door requirements:
(1) ECL-230X
(1) RC65
(1) DDSK
(1) DDH-2250
or
(2) ECL-230X
(2) RC65
(1) 90KR
• Machine and Sheet Metal Screws
(Std.)
• Optional Sex Nuts or Security
Torx Screws Available
Dimensions
Riser Diagram
24
8
4
2.25
3
33.08
Listings and Approvals
Single door
Single point lock
LISTED
UL Listed
Panic Hardware
988N-Grade 2
Detex Limited Warranty
10 Year Limited Manufacturers
Warranty
Meets ADA requirements
Pair of Doors - (2)
Meets NFPA 101
for Life Safety,
CA Title 19
ANSI/BHMA
requirements for all
Building Codes
California State Fire Marshall 4140-0127:102
Meets International Building Code
Single point lock and double door
Strike - least secure
October 22, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EXIT CONTROL LOCKS
ECL-230X-W (Weatherized Dead Bolt)
Exit Control Hardware
The ECL-230X-W is a
code compliant, battery
alarmed, rugged dead
bolt, panic device with
photo-luminescent sign
providing maximum security
and a 100 decibel alarm for
secondary exits.
ECL-230X-W
Shown with
Optional
Inside Pull
(specify IP)
This device conforms to
UL1034-34 Temperature
Section 34, UL1034-54 Dust
Section 54, MIL-STD 810F,
Method 506.4 (driving rain
test); MIL-STD 810F and
Method 509.4 (salt fog test).
4” maximum
projection off face
of door
End Cap
Benefits
• Attack resistant design
for maximum holding force
• Weather resistant design for use
in outdoor or wet environments
• Proven durability and reliability
at a reasonable price
• Easy to install
• Reduces employee and
customer theft
• Time tested construction resists
attack from the inside
• One size fits 36”-48” doors for
code compliant acceptance
• For additional security with 4
locking points, specify
ECL-230X-W-DX3
• Easy to see if the lights go out
• Straightforward operation that
everyone understands
Features
• Dead bolt lock -1” throw with just
over 3/4” engagement with the
frame
• Saw resistant dead bolt
• Corrosion resistant alloy lock body
• 100 decibel alarm, powered by
9-volt battery (included)
• Accepts 5-pin through 7-pin
standard and interchangeable
core rim cylinders without using
cylinder collar
• Durable photo-luminescent sign
absorbs light to then "glow in the
dark" when lights are dimmed
• Surface/flush reversible strike
• Locking and unlocking (dead bolt)
always arms and disarms the alarm
Mechanical Options
• Gray Finish (Std.)
Note: Contact factory for additional
finishes
• DX1 - Add hinge side protection
with one hinge bolt for 2 locking
points (3/4” frame engagement)
• English Push Plate Sign (Std.)
• 30 - Fits 30” wide door
• DX2 - Add hinge side protection
with two hinge side bolts for 3
locking points (3/4” frame
engagement)
• DX3 - For maximum hinge side
protection add three hinge side
bolts for 4 locking points
(3/4” frame engagement)
• Non-handed
• Low profile meets International
Building Code requirement
allowing for 4” maximum projection
off face of door
• Resetting the alarm can only be
accomplished with a control key
• For 9VDC hardwiring add
BE-961-1 or BE-961-2
• RWS - Spanish Sign
• Other Languages available
(call factory for details)
Mechanical Options Continued
• IK7R - InstaKey Cylinder installed
in Lock & or Trim
• 03T - Trim Plate
• 03PP - Pull Plate
Rim cylinder required for 03 Trims
(sold separately)
• RC65 - Rim Cylinder, Schlage
“C” Keyway with 2 keys installed
in Lock & or Trim
• 01T - Trim Plate
• IP - Inside Pull
• 01PP - Pull Plate
• DDSK - Double Door Strike Kit
• IC7R - Interchangeable core
housing installed in Lock & or Trim
• SN1 - Sex Nut Kit
• CL - Cover Lock (Standard on TB
configuration)
• SS - Security Screws
• CL-SS - Cover Lock & Security
Screws
• RK - ECL-230D RetroFit Kit
(End-cap plate & lock-body plate)
• BE-961 - Hardwired Conversion
Kit, eliminates battery
(Sold Separately)
NOTE: BE-961 is not weatherized,
protect with NEMA enclosure.
Technical Information
• Door Types - Wood, Hollow Metal
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Standard Device fits 36”-48” door
• Optional Device fits 30”-36” door
• Double Door requirements:
(1) ECL-230X-W
(1) RC65
(1) DDSK
(1) DDH-2250
or
(2) ECL-230X-W
(2) RC65
(1) 90KR
• Machine and Sheet Metal Screws
(Std.)
• Optional Sex Nuts or Security
Torx Screws Available
Dimensions
Riser Diagram
24
8
4
2.25
3
33.08
Listings and Approvals
Single door
Single point lock
LISTED
UL Listed
Panic Hardware
988N-Grade 2
Detex Limited Warranty
10 Year Limited Manufacturers
Warranty
UL1034-34 Temperature Section 34
[Temperature Range -31° F (-35° C) to
150° F (+66° C)]
UL 1034-54 Dust Section 54
Meets ADA requirements
Pair of Doors - (2)
Meets NFPA 101
for Life Safety,
CA Title 19
ANSI/BHMA
requirements for all
Building Codes
California State Fire Marshall 4140-0127:102
Single point lock and double door
Strike - least secure
October 22, 2012
Meets International Building Code
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EXIT CONTROL LOCKS
ECL-230X-TB (Top and Bottom Bolt)
Exit Control Hardware (Double Door Application)
The ECL-230X-TB is
a code compliant,
battery alarmed,
rugged 2-point dead
bolt, panic device with
photo-luminescent
sign providing
maximum security
and a 100 decibel
alarm for secondary
exits.
Top Bolt
ECL-230X-TB
Shown with
Optional
Inside Pull
(specify IP)
4” maximum
projection off face
of door
End Cap
Bottom Bolt
Benefits
• Attack resistant design
for maximum holding force
• Reduces employee and
customer theft
• Proven durability and reliability
at a reasonable price
• Time tested construction resists
attack from the inside
• Easy to install
• One size fits 36”-48” doors for
code compliant acceptance
• Straightforward operation that
everyone understands
• Accepts 5-pin through 7-pin
standard and interchangeable
core rim cylinders without using
cylinder collar
• Non-handed
Features
• 2-point, 3/4” throw top and
bottom locks with just over 5/8”
engagement with the strike
• Saw resistant dead bolts
• Corrosion resistant alloy lock
body
• 100 decibel alarm, powered by
9-volt battery (included)
• Surface/flush reversible strike
• Durable photo-luminescent sign
absorbs light to then "glow in the
dark" when lights are dimmed
• Locking and unlocking (dead bolt)
always arms and disarms the
alarm
• For additional security with 5
locking points, specify
ECL-230X-TB-DX3
• Easy to see if the lights go out
• Low profile meets International
Building Code requirement
allowing for 4” maximum projection
off face of door
• Resetting the alarm can only be
accomplished with a control key
• For 9VDC hardwiring add
BE-961-1 or BE-961-2
Mechanical Options
• Gray Finish (Std.)
Note: Contact factory for additional
finishes
• DX1 - Add hinge side protection
with one hinge bolt for 3 locking
points (3/4” frame engagement)
• English Push Plate Sign (Std.)
• DX2 - Add hinge side protection
with two hinge side bolts for 4
locking points (3/4” frame
engagement)
• 84” - Fits 6’8” to 7’ door
• 96” - Fits 7’ to 8’ door
• 120” - Fits 8’ to 10’ door
• 30 - Fits 30” wide door
• DX3 - For maximum hinge side
protection add three hinge side
bolts for 5 locking points
(3/4” frame engagement)
• RWS - Spanish Sign
• Other Languages available
(call factory for details)
Mechanical Options Continued
• 03T - Trim Plate
• 03PP - Pull Plate
Rim cylinder required for 03 Trims
(sold separately)
• 01T - Trim Plate
• RC65 - Rim Cylinder, Schlage
“C” Keyway with 2 keys installed
in Lock & or Trim
• SS - Security Screws
• IP - Inside Pull
• RK - ECL-230D RetroFit Kit
(End-cap plate & lock-body plate)
• RC - Rod Covers
• BG - Bottom Bolt Guard
• CL-SS - Cover Lock & Security
Screws
• 96B - Dust Proof Strike
• DDSK - Double Door Strike Kit
• 01PP - Pull Plate
• IC7R - Interchangeable core
housing installed in Lock & or Trim
• IK7R - InstaKey Cylinder installed
in Lock & or Trim
• 96B-DDS - Dust Proof Strike &
Double Door Strike
• RC-BG - Rod Covers & Bottom
Bolt Guard
• SN1 - Sex Nut Kit
• BE-961 - Hardwired Conversion
Kit, eliminates battery
(Sold Separately)
• CL - Cover Lock (Standard on TB
configuration)
Technical Information
• Door Types - Wood, Hollow Metal
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Standard Device fits 36”-48” door
• Optional Device fits 30”-36” door
• Machine and Sheet Metal Screws
(Std.)
• Double Door requirements:
(1) ECL-230X-TB
(1) RC65
(1) DDSK
(1) DDH-2250
or
(2) ECL-230X-TB
(2) RC65
(1) 90KR
• Optional Sex Nuts or Security
Torx Screws Available
Dimensions
Riser Diagram
1.525
1.79
.935
8
4
1.525
Listings and Approvals
LISTED
Pair of Doors - (2)
2-point locks
UL Listed
Panic Hardware
988N-Grade 2
ANSI/BHMA
requirements for all
Building Codes
California State Fire Marshall 4140-0127:102
Meets International Building Code
October 22, 2012
1.79
Detex Limited Warranty
10 Year Limited Manufacturers
Warranty
Meets ADA requirements
Meets NFPA 101
for Life Safety,
CA Title 19
2-point lock
3
6.25
33.08
Single 2-point lock
4.5
6.25
24
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EXIT CONTROL LOCKS
ECL-230X-W-TB (Weatherized Top and Bottom Bolt)
Exit Control Hardware (Double Door Application)
The ECL-230X-W-TB is a
code compliant, battery
alarmed, rugged 2-point
dead bolt, panic device with
photo-luminescent sign
providing maximum security
and a 100 decibel alarm for
secondary exits.
Top Bolt
ECL-230X-W-TB
Shown with
Optional
Inside Pull
(specify IP)
This device conforms to
UL1034-34 Temperature
Section 34, UL1034-54 Dust
Section 54, MIL-STD 810F,
Method 506.4 (driving rain
test); MIL-STD 810F and
Method 509.4 (salt fog test).
Benefits
• Attack resistant design
for maximum holding force
• Weather resistant design for use
in outdoor or wet environments
• Proven durability and reliability
at a reasonable price
Features
• 2-point, 3/4” throw top and
bottom locks with just over 5/8”
engagement with the strike
• Saw resistant dead bolts
• Corrosion resistant alloy lock body
• 100 decibel alarm, powered by
9-volt battery (included)
• Surface/flush reversible strike
4” maximum
projection off face
of door
Bottom Bolt
• Easy to install
• Reduces employee and
customer theft
• Time tested construction resists
attack from the inside
• One size fits 36”-48” doors for
code compliant acceptance
• Accepts 5-pin through 7-pin
standard and interchangeable
core rim cylinders without using
cylinder collar
• Durable photo-luminescent sign
absorbs light to then "glow in the
dark" when lights are dimmed
• Locking and unlocking (dead bolt)
always arms and disarms the alarm
Mechanical Options
• Gray Finish (Std.)
Note: Contact factory for additional
finishes
• DX1 - Add hinge side protection
with one hinge bolt for 3 locking
points (3/4” frame engagement)
• English Push Plate Sign (Std.)
• DX2 - Add hinge side protection
with two hinge side bolts for 4
locking points (3/4” frame
engagement)
• 84” - Fits 6’8” to 7’ door
• 96” - Fits 7’ to 8’ door
• 120” - Fits 8’ to 10’ door
• 30 - Fits 30” wide door
End Cap
• DX3 - For maximum hinge side
protection add three hinge side
bolts for 5 locking points
(3/4” frame engagement)
• For additional security with 5
locking points, specify
ECL-230X-W-TB-DX3
• Easy to see if the lights go out
• Straightforward operation that
everyone understands
• Non-handed
• Low profile meets International
Building Code requirement
allowing for 4” maximum projection
off face of door
• Resetting the alarm can only be
accomplished with a control key
• For 9VDC hardwiring add
BE-961-1 or BE-961-2
• RWS - Spanish Sign
• Other Languages available
(call factory for details)
Mechanical Options Continued
• 03T - Trim Plate
• 03PP - Pull Plate
Rim cylinder required for 03 Trims
(sold separately)
• 01T - Trim Plate
• RC65 - Rim Cylinder, Schlage
“C” Keyway with 2 keys installed
in Lock & or Trim
• SS - Security Screws
• IP - Inside Pull
• RK - ECL-230D RetroFit Kit
(End-cap plate & lock-body plate)
• RC - Rod Covers
• BG - Bottom Bolt Guard
• CL-SS - Cover Lock & Security
Screws
• 96B - Dust Proof Strike
• DDSK - Double Door Strike Kit
• 01PP - Pull Plate
• IC7R - Interchangeable core
housing installed in Lock & or Trim
• IK7R - InstaKey Cylinder installed
in Lock & or Trim
• 96B-DDS - Dust Proof Strike &
Double Door Strike
• RC-BG - Rod Covers & Bottom
Bolt Guard
• SN1 - Sex Nut Kit
• BE-961 - Hardwired Conversion
Kit, eliminates battery
(Sold Separately)
NOTE: BE-961 is not weatherized,
protect with NEMA enclosure.
• CL - Cover Lock (Standard on TB
configuration)
Technical Information
• Door Types - Wood, Hollow Metal
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Standard Device fits 36”-48” door
• Optional Device fits 30”-36” door
• Machine and Sheet Metal Screws
(Std.)
• Double Door requirements:
(1) ECL-230X-W-TB
(1) RC65
(1) DDSK
(1) DDH-2250
or
(2) ECL-230X-W-TB
(2) RC65
(1) 90KR
• Optional Sex Nuts or Security
Torx Screws Available
Dimensions
Riser Diagram
1.525
1.79
.935
8
4
1.525
Listings and Approvals
LISTED
3
6.25
33.08
Single 2-point lock
4.5
6.25
24
UL Listed
Panic Hardware
988N-Grade 2
1.79
Detex Limited Warranty
10 Year Limited Manufacturers
Warranty
UL1034-34 Temperature Section 34
Pair of Doors - (2)
2-point locks
[Temperature Range -31° F (-35° C) to
150° F (+66° C)]
UL 1034-54 Dust Section 54
Meets ADA requirements
Meets NFPA 101
for Life Safety,
CA Title 19
ANSI/BHMA
requirements for all
Building Codes
2-point lock
California State Fire Marshall 4140-0127:102
October 22, 2012
Meets International Building Code
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EXIT CONTROL LOCKS
ECL-230X-TD (Top and Dead Bolt)
Exit Control Hardware
The ECL-230X-TD is
a code compliant,
battery alarmed,
rugged 2-point dead
bolt, panic device with
photo-luminescent
sign providing
maximum security
and a 100 decibel
alarm for secondary
exits.
Top Bolt
ECL-230X-TD
Shown with
Optional
Inside Pull
(specify IP)
4” maximum
projection off face
of door
End Cap
Benefits
• Attack resistant design
for maximum holding force
• Reduces employee and
customer theft
• Proven durability and reliability
at a reasonable price
• Time tested construction resists
attack from the inside
• Easy to install
• One size fits 36”-48” doors for
code compliant acceptance
• Straightforward operation that
everyone understands
• Surface/flush reversible strike
• Non-handed
• Accepts 5-pin through 7-pin
standard and interchangeable
core rim cylinders without using
cylinder collar
• Low profile meets International
Building Code requirement
allowing for 4” maximum projection
off face of door
• Corrosion resistant alloy lock
body
• Durable photo-luminescent sign
absorbs light to then "glow in the
dark" when lights are dimmed
• Resetting the alarm can only be
accomplished with a control key
• 100 decibel alarm, powered by
9-volt battery (included)
• Locking and unlocking (dead bolt)
always arms and disarms the alarm
Mechanical Options
• Gray Finish (Std.)
Note: Contact factory for additional
finishes
• DX1 - Add hinge side protection
with one hinge bolt for 3 locking
points (3/4” frame engagement)
• For additional security with 5
locking points, specify
ECL-230X-TD-DX3
• Easy to see if the lights go out
Features
• 2-point, 1” throw dead bolt lock
with just over 3/4” engagement
with the frame and a 3/4” throw
top lock with just over 5/8”
engagement with the strike
• Saw resistant dead bolts
• English Push Plate Sign (Std.)
• 84” - Fits 6’8” to 7’ door
• 96” - Fits 7’ to 8’ door
• 120” - Fits 8’ to 10’ door
• 30 - Fits 30” wide door
• DX2 - Add hinge side protection
with two hinge side bolts for 4
locking points (3/4” frame
engagement)
• DX3 - For maximum hinge side
protection add three hinge side
bolts for 5 locking points
(3/4” frame engagement)
• For 9VDC hardwiring add
BE-961-1 or BE-961-2
• RWS - Spanish Sign
• Other Languages available
(call factory for details)
Mechanical Options Continued
• 03T - Trim Plate
• 03PP - Pull Plate
Rim cylinder required for 03 Trims
(sold separately)
• 01T - Trim Plate
• RC65 - Rim Cylinder, Schlage
“C” Keyway with 2 keys installed
in Lock & or Trim
• SS - Security Screws
• IP - Inside Pull
• RK - ECL-230D RetroFit Kit
(End-cap plate & lock-body plate)
• RC - Rod Covers
• BG - Bottom Bolt Guard
• CL-SS - Cover Lock & Security
Screws
• 96B - Dust Proof Strike
• DDSK - Double Door Strike Kit
• 01PP - Pull Plate
• IC7R - Interchangeable core
housing installed in Lock & or Trim
• IK7R - InstaKey Cylinder installed
in Lock & or Trim
• 96B-DDS - Dust Proof Strike &
Double Door Strike
• RC-BG - Rod Covers & Bottom
Bolt Guard
• SN1 - Sex Nut Kit
• BE-961 - Hardwired Conversion
Kit, eliminates battery
(Sold Separately)
• CL - Cover Lock (Standard on TB
configuration)
Technical Information
• Door Types - Wood, Hollow Metal
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Standard Device fits 36”-48” door
• Optional Device fits 30”-36” door
• Machine and Sheet Metal Screws
(Std.)
• Double Door requirements:
(1) ECL-230X-TD
(1) RC65
(1) DDSK
(1) DDH-2250
or
(2) ECL-230X-TD
(2) RC65
(1) 90KR
• Optional Sex Nuts or Security
Torx Screws Available
Dimensions
Riser Diagram
1.525
1.79
.935
24
33.08
Listings and Approvals
Single 2-point lock
4.5
6.25
4
UL Listed
LISTED
Panic Hardware
988N-Grade 2
8
2.25
3
Detex Limited Warranty
10 Year Limited Manufacturers
Warranty
Meets ADA requirements
Pair of Doors - (2)
2-point locks
Meets NFPA 101
for Life Safety,
CA Title 19
ANSI/BHMA
requirements for all
Building Codes
California State Fire Marshall 4140-0127:102
2-point lock and double door
Strike - least secure
October 22, 2012
Meets International Building Code
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EXIT CONTROL LOCKS
ECL-230X-W-TD (Weatherized Top and Dead Bolt)
Exit Control Hardware
The ECL-230X-W-TD is a
code compliant, battery
alarmed, rugged 2-point
dead bolt, panic device with
photo-luminescent sign
providing maximum security
and a 100 decibel alarm for
secondary exits.
Top Bolt
ECL-230X-W-TD
Shown with
Optional
Inside Pull
(specify IP)
This device conforms to
UL1034-34 Temperature
Section 34, UL1034-54 Dust
Section 54, MIL-STD 810F,
Method 506.4 (driving rain
test); MIL-STD 810F and
Method 509.4 (salt fog test).
Benefits
• Attack resistant design
for maximum holding force
• Weather resistant design for use
in outdoor or wet environments
• Proven durability and reliability
at a reasonable price
Features
• 2-point, 1” throw dead bolt lock
with just over 3/4” engagement
with the frame and a 3/4” throw
top lock with just over 5/8”
engagement with the strike
4” maximum
projection off face
of door
• Easy to install
• Reduces employee and
customer theft
• Time tested construction resists
attack from the inside
• One size fits 36”-48” doors for
code compliant acceptance
End Cap
• For additional security with 5
locking points, specify
ECL-230X-W-TD-DX3
• Easy to see if the lights go out
• Straightforward operation that
everyone understands
• Surface/flush reversible strike
• Non-handed
• Accepts 5-pin through 7-pin
standard and interchangeable
core rim cylinders without using
cylinder collar
• Low profile meets International
Building Code requirement
allowing for 4” maximum projection
off face of door
• Durable photo-luminescent sign
absorbs light to then "glow in the
dark" when lights are dimmed
• Resetting the alarm can only be
accomplished with a control key
• Locking and unlocking (dead bolt)
always arms and disarms the alarm
• For 9VDC hardwiring add
BE-961-1 or BE-961-2
• Gray Finish (Std.)
Note: Contact factory for additional
finishes
• DX1 - Add hinge side protection
with one hinge bolt for 3 locking
points (3/4” frame engagement)
• RWS - Spanish Sign
• English Push Plate Sign (Std.)
• DX2 - Add hinge side protection
with two hinge side bolts for 4
locking points (3/4” frame
engagement)
• Saw resistant dead bolts
• Corrosion resistant alloy lock body
• 100 decibel alarm, powered by
9-volt battery (included)
Mechanical Options
• 84” - Fits 6’8” to 7’ door
• 96” - Fits 7’ to 8’ door
• 120” - Fits 8’ to 10’ door
• 30 - Fits 30” wide door
• DX3 - For maximum hinge side
protection add three hinge side
bolts for 5 locking points
(3/4” frame engagement)
• Other Languages available
(call factory for details)
Mechanical Options Continued
• 03T - Trim Plate
• 03PP - Pull Plate
Rim cylinder required for 03 Trims
(sold separately)
• 01T - Trim Plate
• RC65 - Rim Cylinder, Schlage
“C” Keyway with 2 keys installed
in Lock & or Trim
• SS - Security Screws
• IP - Inside Pull
• RK - ECL-230D RetroFit Kit
(End-cap plate & lock-body plate)
• RC - Rod Covers
• BG - Bottom Bolt Guard
• CL-SS - Cover Lock & Security
Screws
• 96B - Dust Proof Strike
• DDSK - Double Door Strike Kit
• 01PP - Pull Plate
• IC7R - Interchangeable core
housing installed in Lock & or Trim
• IK7R - InstaKey Cylinder installed
in Lock & or Trim
• 96B-DDS - Dust Proof Strike &
Double Door Strike
• RC-BG - Rod Covers & Bottom
Bolt Guard
• SN1 - Sex Nut Kit
• BE-961 - Hardwired Conversion
Kit, eliminates battery
(Sold Separately)
NOTE: BE-961 is not weatherized,
protect with NEMA enclosure.
• CL - Cover Lock (Standard on TB
configuration)
Technical Information
• Door Types - Wood, Hollow Metal
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Standard Device fits 36”-48” door
• Optional Device fits 30”-36” door
• Machine and Sheet Metal Screws
(Std.)
• Double Door requirements:
(1) ECL-230X-W-TD
(1) RC65
(1) DDSK
(1) DDH-2250
or
(2) ECL-230X-W-TD
(2) RC65
(1) 90KR
• Optional Sex Nuts or Security
Torx Screws Available
Dimensions
Riser Diagram
1.525
1.79
.935
24
33.08
Listings and Approvals
Single 2-point lock
4.5
6.25
4
UL Listed
LISTED
Panic Hardware
988N-Grade 2
8
2.25
3
Detex Limited Warranty
10 Year Limited Manufacturers
Warranty
UL1034-34 Temperature Section 34
[Temperature Range -31° F (-35° C) to
150° F (+66° C)]
Pair of Doors - (2)
2-point locks
UL 1034-54 Dust Section 54
Meets ADA requirements
Meets NFPA 101
for Life Safety,
CA Title 19
ANSI/BHMA
requirements for all
Building Codes
2-point lock and double door
Strike - least secure
October 22, 2012
California State Fire Marshall 4140-0127:102
Meets International Building Code
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EXIT CONTROL LOCKS
ECL-230X-TDB (Top Bolt, Dead Bolt and Bottom Bolt)
Exit Control Hardware
The ECL-230X-TDB is
a code compliant,
battery alarmed,
rugged 3-point dead
bolt, panic device with
photo-luminescent
sign providing
maximum security
and a 100 decibel
alarm for secondary
exits.
Top Bolt
ECL-230X-TDB
Shown with
Optional
Inside Pull
(specify IP)
4” maximum
projection off face
of door
End Cap
Bottom Bolt
Benefits
• Attack resistant design
for maximum holding force
• Reduces employee and
customer theft
• Proven durability and reliability
at a reasonable price
• Time tested construction resists
attack from the inside
• Easy to install
• One size fits 36”-48” doors for
code compliant acceptance
• Straightforward operation that
everyone understands
• Surface/flush reversible strike
• Non-handed
• Accepts 5-pin through 7-pin
standard and interchangeable
core rim cylinders without using
cylinder collar
• Low profile meets International
Building Code requirement
allowing for 4” maximum projection
off face of door
• Corrosion resistant alloy lock
body
• Durable photo-luminescent sign
absorbs light to then "glow in the
dark" when lights are dimmed
• Resetting the alarm can only be
accomplished with a control key
• 100 decibel alarm, powered by
9-volt battery (included)
• Locking and unlocking the dead bolt
always arms and disarms the alarm
Mechanical Options
• Gray Finish (Std.)
Note: Contact factory for additional
finishes
• DX1 - Add hinge side protection
with one hinge bolt for 4 locking
points (3/4” frame engagement)
Features
• 3-point, 1" throw dead bolt lock
with just over 3/4” engagement
with the frame, and 3/4” throw top
and bottom locks with 5/8”
engagement with the strike
• Saw resistant dead bolts
• English Push Plate Sign (Std.)
• 84” - Fits 6’8” to 7’ door
• 96” - Fits 7’ to 8’ door
• 120” - Fits 8’ to 10’ door
• 30 - Fits 30” wide door
• DX2 - Add hinge side protection
with two hinge side bolts for 5
locking points (3/4” frame
engagement)
• DX3 - For maximum hinge side
protection add three hinge side
bolts for 6 locking points
(3/4” frame engagement)
• For maximum security with 6
locking points, specify
ECL-230X-TDB-DX3
• Easy to see if the lights go out
• For 9VDC hardwiring add
BE-961-1 or BE-961-2
• RWS - Spanish Sign
• Other Languages available
(call factory for details)
Mechanical Options Continued
• 03T - Trim Plate
• 03PP - Pull Plate
Rim cylinder required for 03 Trims
(sold separately)
• 01T - Trim Plate
• RC65 - Rim Cylinder, Schlage
“C” Keyway with 2 keys installed
in Lock & or Trim
• SS - Security Screws
• IP - Inside Pull
• RK - ECL-230D RetroFit Kit
(End-cap plate & lock-body plate)
• RC - Rod Covers
• BG - Bottom Bolt Guard
• CL-SS - Cover Lock & Security
Screws
• 96B - Dust Proof Strike
• DDSK - Double Door Strike Kit
• 01PP - Pull Plate
• IC7R - Interchangeable core
housing installed in Lock & or Trim
• IK7R - InstaKey Cylinder installed
in Lock & or Trim
• 96B-DDS - Dust Proof Strike &
Double Door Strike
• RC-BG - Rod Covers & Bottom
Bolt Guard
• SN1 - Sex Nut Kit
• BE-961 - Hardwired Conversion
Kit, eliminates battery
(Sold Separately)
• CL - Cover Lock (Standard on TB
configuration)
Technical Information
• Door Types - Wood, Hollow Metal
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Standard Device fits 36”-48” door
• Optional Device fits 30”-36” door
• Machine and Sheet Metal Screws
(Std.)
• Double Door requirements:
(1) ECL-230X-TDB
(1) RC65
(1) DDSK
(1) DDH-2250
or
(2) ECL-230X-TDB
(2) RC65
(1) 90KR
• Optional Sex Nuts or Security
Torx Screws Available
Dimensions
Riser Diagram
1.525
1.79
.935
8
4
1.525
Pair of Doors - (2)
3-point locks
Listings and Approvals
UL Listed
LISTED
2.25
3
6.25
33.08
Single 3-point lock
4.5
6.25
24
Panic Hardware
988N-Grade 2
1.79
Detex Limited Warranty
10 Year Limited Manufacturers
Warranty
Meets ADA requirements
(1) 3-point lock and double
door strike - least secure
Meets NFPA 101
for Life Safety,
CA Title 19
ANSI/BHMA
requirements for all
Building Codes
California State Fire Marshall -
(1) 3-point lock with double
door strike and (1) 2-point
lock
October 22, 2012
4140-0127:102
Meets International Building Code
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EXIT CONTROL LOCKS
ECL-230X-W-TDB (Weatherized Top Bolt, Dead Bolt and Bottom Bolt)
Exit Control Hardware
The ECL-230X-W-TDB is
a code compliant,
battery alarmed, rugged
3-point dead bolt, panic
device with photoluminescent sign providing
maximum security
and a 100 decibel alarm for
secondary exits.
Top Bolt
ECL-230X-W-TDB
Shown with
Optional
Inside Pull
(specify IP)
This device conforms to
UL1034-34 Temperature
Section 34, UL1034-54 Dust
Section 54, MIL-STD 810F,
Method 506.4 (driving rain
test); MIL-STD 810F and
Method 509.4 (salt fog test).
Benefits
• Attack resistant design
for maximum holding force
• Weather resistant design for use
in outdoor or wet environments
• Proven durability and reliability
at a reasonable price
Features
• 3-point, 1" throw dead bolt lock
with just over 3/4” engagement
with the frame, and 3/4” throw top
and bottom locks with 5/8”
engagement with the strike
• Saw resistant dead bolts
• Corrosion resistant alloy lock body
• 100 decibel alarm, powered by
9-volt battery (included)
Mechanical Options
• Gray Finish (Std.)
Note: Contact factory for additional
finishes
• English Push Plate Sign (Std.)
• 84” - Fits 6’8” to 7’ door
• 96” - Fits 7’ to 8’ door
• 120” - Fits 8’ to 10’ door
• 30 - Fits 30” wide door
4” maximum
projection off face
of door
End Cap
Bottom Bolt
• Easy to install
• Reduces employee and
customer theft
• Time tested construction resists
attack from the inside
• One size fits 36”-48” doors for
code compliant acceptance
• For maximum security with 6
locking points, specify
ECL-230X-W-TDB-DX3
• Easy to see if the lights go out
• Straightforward operation that
everyone understands
• Surface/flush reversible strike
• Non-handed
• Accepts 5-pin through 7-pin
standard and interchangeable
core rim cylinders without using
cylinder collar
• Low profile meets International
Building Code requirement
allowing for 4” maximum projection
off face of door
• Durable photo-luminescent sign
absorbs light to then "glow in the
dark" when lights are dimmed
• Resetting the alarm can only be
accomplished with a control key
• Locking and unlocking the dead bolt
always arms and disarms the alarm
• DX1 - Add hinge side protection
with one hinge bolt for 4 locking
points (3/4” frame engagement)
• DX2 - Add hinge side protection
with two hinge side bolts for 5
locking points (3/4” frame
engagement)
• DX3 - For maximum hinge side
protection add three hinge side
bolts for 6 locking points
(3/4” frame engagement)
• For 9VDC hardwiring add
BE-961-1 or BE-961-2
• RWS - Spanish Sign
• Other Languages available
(call factory for details)
Mechanical Options Continued
• 03T - Trim Plate
• 03PP - Pull Plate
Rim cylinder required for 03 Trims
(sold separately)
• 01T - Trim Plate
• RC65 - Rim Cylinder, Schlage
“C” Keyway with 2 keys installed
in Lock & or Trim
• SS - Security Screws
• IP - Inside Pull
• RK - ECL-230D RetroFit Kit
(End-cap plate & lock-body plate)
• RC - Rod Covers
• BG - Bottom Bolt Guard
• CL-SS - Cover Lock & Security
Screws
• 96B - Dust Proof Strike
• DDSK - Double Door Strike Kit
• 01PP - Pull Plate
• IC7R - Interchangeable core
housing installed in Lock & or Trim
• IK7R - InstaKey Cylinder installed
in Lock & or Trim
• 96B-DDS - Dust Proof Strike &
Double Door Strike
• RC-BG - Rod Covers & Bottom
Bolt Guard
• SN1 - Sex Nut Kit
• BE-961 - Hardwired Conversion
Kit, eliminates battery
(Sold Separately)
NOTE: BE-961 is not weatherized,
protect with NEMA enclosure.
• CL - Cover Lock (Standard on TB
configuration)
Technical Information
• Door Types - Wood, Hollow Metal
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Standard Device fits 36”-48” door
• Optional Device fits 30”-36” door
• Machine and Sheet Metal Screws
(Std.)
• Double Door requirements:
(1) ECL-230X-W-TDB
(1) RC65
(1) DDSK
(1) DDH-2250
or
(2) ECL-230X-W-TDB
(2) RC65
(1) 90KR
• Optional Sex Nuts or Security
Torx Screws Available
Dimensions
Riser Diagram
1.525
1.79
.935
8
4
1.525
Listings and Approvals
LISTED
2.25
3
6.25
33.08
Single 3-point lock
4.5
6.25
24
UL Listed
Panic Hardware
988N-Grade 2
1.79
Detex Limited Warranty 10 Year Limited Manufacturers
Warranty
UL1034-34 Temperature Section 34
[Temperature Range -31° F (-35° C) to
Pair of Doors - (2)
3-point locks
150° F (+66° C)]
UL 1034-54 Dust Section 54
Meets ADA requirements
Meets NFPA 101
for Life Safety,
CA Title 19
ANSI/BHMA
requirements for all
Building Codes
(1) 3-point lock and double door
Strike - least secure
October 22, 2012
California State Fire Marshall 4140-0127:102
Meets International Building Code
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EXIT CONTROL LOCKS
ECL-600
Exit Control Hardware
The ECL-600 is a fire rated, code-compliant, rugged, dependable relatching exit device with a
steel plate and photo-luminescent sign providing managed security and a 100 decibel alarm for
secondary fire exits.
ECL-600
Also available in Black
(Cylinders and bar
guard sold separately)
ECL-620
Benefits
• Attack resistant design
withstands over 2200 lbs.
of outside pull force
• Proven durability, reliability and
long service life at a reasonable
price
Features
• 1" throw dead bolt and 3/4" dead
locking latch bolt
• Reduces employee and customer
theft
• Easy to Install
• 100 decibel alarm, powered by
9-volt battery (included)
• Saw resistant dead bolt
• Corrosion resistant alloy lockbody
• Durable steel plate with photo
luminescent sign
Mechanical Options
• Gray Finish (Std.)
• English Push Plate Sign (Std.)
• Black Finish (BK)
• F - 3-Hour Fire Rated
• Straightforward operation that
everyone understands
• Time tested construction resists
attack from the inside
• Accepts 5-pin through 7-pin
standard and interchangeable
core rim cylinders
• Relatching for additional security
• Easy to see if the lights go out
• Other Languages available
(call factory for details)
• Non-handed
• Locking and unlocking the
dead bolt always arms and
disarms the alarm
• Resetting the alarm can only be
accomplished with a control key
• For Panic Hardware see
ECL-230D or ECL-230D-PH
Accessories
• ECL-2100K - Bar Guard Kit to protect end of bar, when
required by code
• F90KR - Key Removable Mullion
for pairs of doors. Each leaf will
operate independently.
• ECL-435K Adjustable Surface
Keeper Bracket for some double
door applications
• ECL-445K - Rim Cylinder, 5-pin
with two keys
• BE-961 - Hard wired Conversion
Kit, eliminates battery
• ECL-620 - Outside Lever Trim
(rim cylinder sold separately)
• Double Door requirements:
Fire Rated
(2) ECL-600
(3) ECL-445K Cylinders
(1) F90KR Key Removable
Mullion (3-hour fire rated to
8'0" high)
• Door Stile - Fits minimum 5-3/4"
with ECL-437K Strike (Std.)
• ECL-1595 - Cylinder Collar
required for 6 or 7 pin cylinders
Technical Information
• Door Types - Wood, Hollow Metal
or Aluminum
• Door Thickness - Fits standard
1-3/4" - 2-1/4"
• Minimum standard door width for
ECL-600 is 34"
• Door Stile - Fits maximum 1-7/8"
with ECL-475 Kit
• Machine and Sheet Metal Screws
(Std.)
• Optional Sex Nuts or Security
Torx Screws Available
Riser Diagram
Dimensions
Front View
24 1/8”
<
10 3/8”
10 3/8”
<
Single Door
< 3 3/4”>
>
>
>
< 5 3/4” ><
Side View
Listings and Approvals
Fire Exit Hardware
Detex Limited Warranty
10 Year Limited Manufacturer's
Warranty
Meets ADA requirements
Meets NFPA 80 & 101
for Life Safety,
CA Title 19
&
Double Doors
with
Key Removable
Mullion
ANSI/BHMA
requirements for all
Building Codes
California State Fire Marshall 4140-0127:102
November 1, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EXIT CONTROL LOCKS
ACCESSORIES for ECL-230X SERIES
Detex makes a number of accessories available that allow the Exit Control Locks to be used in a wide range of
applications. Below is a listing and description of these items.
Item Number
BG
RC
(105771-X)
Rod Covers
Protects rods in high use, high
abuse applications. Used with
ECL-230X-TB, TD & TDB.
BG
(103562)
Bottom Bolt Guard
Protects bottom bolt in high use,
high abuse applications. Used with
ECL-230X-TB & TDB.
RC-BG
(105771-X)
Rod Covers & Bottom Bolt Guard
Protects rods & bottom bolt in high
use, high abuse applications. Used
with ECL-230X-TB & TDB.
DX1
One hinge side lock
One hinge side locking point, keeps
door secure even if hinge knuckles
are removed. Used when higher
level of security is required.
DX2
Two hinge side locks
Two hinge side locking points,
keeps door secure even if hinge
knuckles are removed. Used when
higher level of security is required.
DX3
Three singe side locks
Three hinge side locking points,
keeps door secure even if hinge
knuckles are removed. Used when
higher level of security is required.
RC
DX1 shown
Description and Use
IP
Inside Pull
Provides grip handle on inside of
door, assists in pulling door closed
and locking door
EXIT CONTROL LOCKS CONT'D
ACCESSORIES for ECL-230X SERIES
Item Number
Description and Use
DDSK
Double Door Strike Bracket Kit
Mounts on inactive leaf. Typically
used in conjunction with flush bolts
or similar products in double door
applications.
DDH-2250
Double Door Holder
Mounts on inactive leaf. Typically
used on pairs of doors. Locks
inactive leaf, when active leaf
closes, operates similar to
automatic flush bolts.
105059-X
RK
102638
Cover Lock Kit
Provides additional protection for
battery protection. Requires main
operational key and cover lock key
to perform maintenance, change
battery.
ECL-230 Retrofit Plate Kit
Useful when removing an
ECL-230D and installing an
ECL-230X
Rim Cylinder Plate
03 function cylinder trim plate used
on gates
EXIT CONTROL LOCKS CONT'D
ACCESSORIES for ECL-230X SERIES
Item Number
SN1
Description and Use
SN1
(101616-X)
Sex Nuts
Recommended for high use, high
abuse applications
TMP1
Through Bolt Mounting Plate Kit
Recommended for high use, high
abuse applications. Kit is standard
with two plates and four 1/4-20 sex
bolts.
BE-961-1
Battery Eliminator
120VAC to 9VDC - includes 10” flex
conduit (includes 120VAC to 12VAC
transformer)
Battery Eliminator
120VAC to 9VDC - includes 10”
flex conduit with supervisory loop
power, alarm and LED (includes
120VAC to 12VAC transformer)
Battery Eliminator
12VAC to 9VDC - does not include
transformer or flex conduit
Battery Eliminator
24VAC to 9VDC - does not include
transformer or flex conduit
TMP1
BE-961-2
BE-961-1 shown
BE-961-5
BE-961-6
EXIT CONTROL LOCKS CONT'D
ACCESSORIES for ECL-230X SERIES
Item Number
01T
Trim Plate
Does not include outside key
control. Typically used to cover
exterior holes on pull side of door.
01PP
Trim Pull Plate
Does not include outside key
control. Typically used to pull door
open while door is unlocked.
03T
Trim Pull Plate
Requires rim cylinder, provides
outside key control. Pull provided
by others, supplied separately.
03PP
Trim Pull Plate
Requires rim cylinder, provides
outside key control. Typically used
to pull door open while door is
unlocked.
GTPL230X
Gate Plate
Adjustable gate plate fits gates
32” - 52” wide. Fits square or round
gate frames. Comes with holes for
mounting ECL-230X.
03GS
Cylinder Trim
Optional 03 function cylinder trim
used on gates (Rim cylinder sold
separate)
01T
01PP
03T
03PP
October 23, 2012
Description and Use
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EXIT CONTROL LOCKS
ACCESSORIES for ECL-230D SERIES and ECL-600
Detex makes a number of accessories available that allow the Exit Control Locks to be used in a wide range of
applications. Below is a listing and description of these items.
Item Number
ECL-436K
ECL-2100K
ECL-436K shown
Description and Use
Panic Bar Plate Guard Kit
Protects against clothing being
caught on exit bar plate. Used with
ECL-230D.
Panic Bar Plate Guard Kit
Protects against clothing being
caught on exit bar plate. Used with
ECL-230D-PH and ECL-600
(Required)
ECL-475K
Decorative Back Plate Kit
5 19/32" W x 10 3/16" H x .045"
thick. To improve the appearance
of the back of an Exit Control Lock
visible through glass on a narrow
stile glass door.
ECL-498K
Outside Pull and Warning Sign
Mounted on opposite face of door
where conditions or regulations
require that an emergency exit be
openable from both sides. Alarm
sounds when door is opened.
ECL-2105K
Paddle Bar Kit (Retrofit)
Bar extension kit for 3.0' to 4.0'
doors
EXIT CONTROL LOCKS CONT'D
ACCESSORIES for ECL-230D SERIES and ECL-600
ECL-2111K
Optional Captions for Exit Bar
Plates
Item Number
Standard exit bar plate includes
words "EMERGENCY EXIT ONLY".
Do not use this plate where door
does not lead to an exit. For
interior use, order plate 336. When
optional plate 336 is ordered as
an accessory by number (example
ECL-230D x 336), correct plate
is supplied on lock in place of
standard plate at no charge. 3" H x
8 7/8" L - Extends 13" out from the
side of the lock.
ECL-8220
ECL-8220-1
ECL-8220
ECL-336
ECL- 336
ECL-8225-4
ECL-8225-8
Siren/Battery Conversion Kit
For ECL-230C & D. Converts
ECL-230 6 volt lantern battery to 9
volt battery & siren
Description
English Exit Bar Plate
Red (Standard)
Green
English Interior Door Bar Plate
(Red)
Spanish Exit Bar Plate
Green
Red
ECL-8225-6
Chinese/English Exit Bar Plate
(Red)
ECL-8225-7
French Canadian Exit Bar Plate
(Red)
ECL-8225-2
French Exit Bar Plate (Green)
ECL-8225-3
German Exit Bar Plate (Green)
ECL-2109
English Exit Bar Plate for Long Bar ECL-230D-PH (Red)
EXIT CONTROL LOCKS CONT'D
ACCESSORIES for ECL-230D SERIES and ECL-600
Single Door Mechanical Strikes for Inswinging and Outswinging Installations
Description and Use
Item Number
ECL-435K
Adjustable strike bracket, surface
For use on left hand, right hand
inswinging doors or double doors
with one door stationary using flush
bolts or DDH-2250
ECL-439K
Mortise strike
For use on outswinging doors
ECL-437K
Adjustable strike, surface
For use on outswinging doors
INSWINGING DOORS - LH, RH
ECL-435K adjustable strike bracket,
surface
FOR INSWINGING INSTALLATIONS
and
DOUBLE DOOR APPLICATIONS
without a MULLION
Frame
OUTSWINGING DOORS
ECL-439K mortise strike
ECL-437K adjustable strike, surface
* Price of lock includes a kit
containing 439 and 437 strikes
with required mounting screws.
All other strikes must be ordered
separately by number. There is an
extra charge for strikes that are not
included as part of the lock.
FOR OUTSWINGING
INSTALLATIONS
Frame
435K
Strike
Bracket
3/16 Reinforcing
Plate (optional)
Door
3/16 Reinforcing
Plate (optional)
Door
437
Strike
439
Mortise
Strike
All bracket-mounted strikes include unique adjustable feature for proper
installation alignment. All strikes supplied with wood and sheet metal
mounting screws.
November 1, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EXIT CONTROL LOCKS ACCESSORY
BE-961
Battery Eliminator
The BE-961 Battery Eliminator is designed to power security devices such as the Detex ECL-230D,
ECL-230X Series, ECL-600 battery powered series exit control locks and V40 alarmed rim exit device
without reliance on batteries. Converts AC power to DC for supplying battery-operated devices.
BE-961-1
BE-961-2
(For use with ECL products only)
Benefits
• Powers security devices without
reliance on batteries
• Eliminating the need to annually
change 9 volt batteries, saves
money, prevents unnecessary
battery disposal and creates
a greener process
• May be installed on the wall
adjacent to the protected door
quickly and easily
• 10’ Flexible armored cable
connects the battery eliminator to
the security device without
interfering with door use
• LED provides visual status of
power
• For extra security, the connecting
cable may be concealed in the
door using a continuous electric
hinge
Features
• Available Battery Eliminator Power
Supplies:
BE-961-1 = Converts 120VAC to
9VDC
Note: Powers up to three 9V
battery devices)
BE-961-2 = Converts 120VAC to
9VDC includes secure power /
supervisory loop (cutting 9V
power will sound alarm)
Note: For use with ECL products
only.
BE-961-5 = Converts 12VAC to
9VDC
Note: Conduit and transformer
sold separately
BE-961-6 = Converts 24VAC to
9VDC
Note: Conduit and transformer
sold separately
• The BE-961-2 includes an
internal alarm which sounds at
95dB if the secure power feed
wires are cut or when the ECL
unit sounds (for use with ECL
products only)
Technical Information
• 9VDC or 6VDC outputs, jumper
selectable to the security device
• 12 VAC 25 VA transformer included
- requires 120 VAC
• Line input transient suppression
is a standard feature
Dimensions
Detex Limited Warranty
• 4-5/8" wide x 4-5/8" long x
2" deep
3 Year Limited Manufacturers
Warranty
• Standard cast aluminum case
Riser Diagram
BE-961-2
BE-961-1
BE-961-1
MS-1059/1039/2049
EAX-500
Shown with ECL-230D
October 22, 2012
Shown with V40
Shown with EAX-500
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EXIT CONTROL LOCKS ACCESSORY
DDH-2250
Double Door Holder
The DDH-2250, Double Door Holder, is designed for use with Detex Exit Control Locks to provide
locking of the inactive leaf on an outswinging double door. Release of the active leaf disengages the
DDH-2250 allowing the inactive leaf to open freely.
Benefits
• Enables the Detex Exit Control
Locks to be used with any wood,
metal or glass double outswinging
exit door
Features
• Case hardened steel locking bolt
• Interchangeable pin
• Stainless steel spring providing
instant release of lock bolt
• Flexibility for mounting on either
the left or right door
• Simple, easy operation - no
mortise required
• Cast housing of 3/16" durable zinc
alloy
• Reversible for right or left hand
doors
Dimensions
Detex Limited Warranty
• 7 1/8" long x 2 1/4" deep x
2 7/8" high
3 Year Limited Manufacturers
Warranty
October 23, 2012
• Pushing the exit control lock opens
the active leaf and automatically
disengages the DDH-2250,
providing instant emergency exit
with both doors
• 1/4" thick face plate
• Mounting kit contains, screws,
allen wrench, strike plate, door
protection plate and templates
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
DX BOLTS
DX1- Single Hinge Bolt / DX2 - Double Hinge Bolts / DX3 Triple Hinge Bolts
Hinge Side Locking Dead Bolt for Supplementary Protection
Providing hinge-side protection, the DX Bolt is an additional line of defense against break-ins. Even
if the exterior door hinges are compromised the DX Bolts keep your door locked and secure. These
passive deadbolts are easy-to-install and offer another layer of attack resistance. DX Bolts can be
added to most applications, providing code compliant, economical, multipoint locking security. DX Bolts
are available for use with all Detex panic hardware.
Shown here with:
ECL-230X-TDB-DX3
6 point lock
Benefits
• Provides additional line of
defense against break-ins
• Attack-resistant design keeps
door locked and secure to deter
against burglaries
• Adds additional locking points,
improving holding strength to slow
down crowbar attacks
• Easy-to-install design provides
secure and accurate bolt
engagement every time
• Even if the hinges are cut off, the
door remains locked and secure
• Through-bolt mounting installation
improves holding strength
• Add DX bolts to any Detex multipoint lock to create 4 point, 5
point and 6 point locking panic
hardware
• One piece stainless construction
provides superior holding strength
Features
• Can be added to almost any
out-swing door application
• You choose the right level of
protection with kits of 1 bolt, 2
bolts or 3 bolts
• Non-handed
• Kits include through-bolt
mounting hardware
• Excellent for exterior applications
or doors that get wet
Technical Information
• Door Types - Hollow Metal,
Fiberglass or Aluminum
• Door Thickness - Fits standard
1-3/4" - 2-1/4" (for other door
thicknesses contact factory)
Finishes
• Available in Steel Gray (GRY) standard Steel
• Available in Painted Black (BLK)
• Machine Screws with Sex Nut
fasteners (Std.)
Listings and Approvals
Dimensions
Detex Limited Warranty
10 Year Limited Manufacturers
Warranty
DOOR
FOLD
FRAME
Ø5/16
Thru door
Ø3/8
Outside of
door
2 PL
Ø7/8"
3"
1-1/2
3/4
FOLD
1"
October 23, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
VERTICAL ROD ASSEMBLIES
VRA-143 SERIES
for Detex Exit control Lock Systems (230 Series)
A Vertical Rod Assembly (VRA) is used with a Detex Exit Control
Lock (ECL-230) to provide exit control security on an outswinging
double doors. In addition it may be used on a single door
installation to provide top and bottom latching instead of the single
point latching provided by the Exit Control Lock itself.
Benefits
• 2 point locking provides extra
security
• 3 versions to suit most conditions
Features
• Heavy duty 3/8' diameter bolts
• VRA-143B secures a single or a
pair of doors with one ECL-230
Series Lock, allowing outside
access to the active door
Mechanical Options
• Option B (std) - Active leaf opens
both
• Surface applied - no mortise
required for easy installation
• Automatically released when
the ECL-230 device is activated
• 2 VRA-143D assemblies hold a
pair of doors with 2 ECL-230
series locks & permit independent
operation of each leaf
• Non-handed
• Option D - Each leaf independent
• Door Heights - 84" (std)
Special 85" to 96" and over 96"
• ECL-2100K Bar Guard Kit (for use
with ECL-230D-PH)
• ECL-1595 - Standard cylinder
collar for ECL-230D or
ECL-230D-PH
• Sizes accomodate 80" & 120"
doors
• Option C - Active leaf opens first;
Inactive leaf remains locked until
ECL-230D is activated
Accessories
• ECL-230D
• ECL-230D-PH
• ECL-436K Bar Guard Kit (for use
with ECL-230D)
• RC65 - Rim Cylinder
• DX Bolts for hinge locking
Technical Information
• Bolts - case hardened, heat
treated and zinc plated
• Rods - steel, zinc plated
• Housing - steel, zinc plated
Riser Diagram
I = Inactive Leaf
I
A = Active Leaf
A
Type “B”
Listings and Approvals
“U.L. Listed
Exit Hardware”
October 23, 2012
A = Active Leaf
A
I = Inactive Leaf
A = Active Leaf
I
A
Type “C”
A
Type “D”
Detex Limited Warranty
3 Year Limited Manufacturers
Warranty
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
IC7 = 7-pin IC Cylinder Housing
(core not included),
factory installed
* SK1 = Kit allows for wall mounting,
includes (1) MS-1039S door
contact - Add $45
* SK2 = Kit allows for wall mounting,
includes (2) MS-1039S door
contacts - Add $90
* SK3 = Kit allows for wall mounting,
includes (1) MS-1059S door
contact - Add $45
* SK4 = Kit allows for wall mounting,
includes (2) MS-1059S door
contacts - Add $90
* SK5 = Kit allows for wall mounting,
includes (1) MS-2049 door
contact - Add $83
* SK6 = Kit allows for wall mounting,
includes (2) MS-2049 door
contacts - Add $166
Contact factory for other languages
2 = 5 Second Arming Delay
* SK1 thru SK6 Kit Options not
available in Weatherized
GWE = Green w/wht letters English
1 = 1 Second Arming Delay
RWS = Red w/wht letters Spanish
None = Red w/wht letters English
RWC = Red w/wht letters Chinese
* W = Weatherized
KS = Key Stop, factory installed
July 2, 2012
SI = Status Indicator On - Add $5
0 0 x Enhancements x Color x Signage x Cylinders x Miscellaneous x Kits x Other Options
BK = Black
None = Gray (Std.)
MC65 = Mortise Cylinder,
factory installed
HOW TO ORDER
ARMING DELAY
0 = 15 Second Arming Delay
Example Order
Number
EAX-5
TIMED BYPASS
5 = Alarm sounds if door is open after arming
delay. Manual Re-arm only
EXTENDED BYPASS
0 = Alarm must be manually turned off
2 = 2 min. Auto Re-arm
3 = 10 min. Auto Re-arm
4 = 20 min. Auto Re-arm
-500
EXIT ALARMS
EAX-500
Battery Powered Door or Wall Mount Exit Alarm
The Detex EAX-500 Series is designed for applications requiring an alarmed exit device on secured doors. The
alarm, with approximately 100dB, will sound when an unauthorized exit occurs. The EAX-500, with its redesigned
shape and smaller size make it the ideal choice for quick and easy installations on emergency exit and restricted
doors.
Shown with cylinder (cylinder
sold separately)
Benefits
• Low cost, self-contained door
alarm with piezo horn that sounds
to warn unauthorized use of a
door or gate
• Secure, tamper resistant housing
• Quick, easy installation saves
time and money
• Patented plastic template allows
for foolproof alignment of internal
magnetic door contact and
accurate installation
• Patented cam assembly
automatically adjusts for different
sizes of cylinders without use of
spacers
• Modern graphics on cover to
demonstrate key rotation and
operation
• Tapered cover allows for
installation on narrow stile doors,
2" minimum
• Alarm can only be silenced by
proper control key
Features
• Intelligent circuit senses the
external magnet location
automatically and sets the correct
door handing
• Extended bypass (now a standard
feature) allows alarm to remain
bypassed when door is open and
automatically rearm upon door
closing
• 100 dB piezo alarm
• 9VDC battery operated with Low
Battery Alert
• LED visual and audible arming
indicators
• Field selectable 2-minute auto
rearm, if desired
• Field selectable status indicators,
if desired
Mechanical Options
• EAX-500 may be ordered in
several kit configurations:
SK1 Kit allows for wall mounting
and includes (1) white MS-1039S
door contact
SK2 Kit allows for wall mounting
and includes (2) white MS-1039S
door contacts
SK3 Kit allows for wall mounting
and includes (1) brown MS-1059S
door contact
SK4 Kit allows for wall mounting
and includes (2) brown MS-1059S
door contacts
SK5 Kit allows for wall mounting
and includes (1) grey MS-2049S
door contact
SK6 Kit allows for wall mounting
and includes (2) grey MS-2049S
door contacts
• KS - Key Stop (Key removed only
when armed)
• EAX-500SK includes exit alarm
prepped for wall mounting,
mortise cylinder and surface
magnetic door contacts - specify
cover lock # - additional surface
contacts can be ordered separately
• OKC - Outside Key Control (Rim
Cylinder required)
Electrical Options
Other EAX Exit Alarms Include:
• EAX-500W- Weatherized
Battery Powered
• EAX-2500 - AC Powered
• EAX-3500 includes timed bypass
alarm, rechargeable battery
(mortise cylinder sold separately)
Accessories
• IC7 - Interchangeable mortise
cylinder
• EAX-3500FK includes timed
bypass alarm, rechargeable
battery, flush magnetic switch
and plug-in 24VDC transformer
• EAX-3500SK includes timed
bypass alarm, rechargeable
battery, surface magnetic switch
and plug-in 24VDC transformer
• MC65 - Mortise cylinder
Technical Information
• Machine and Self-Drilling Screws
(Std.)
• Optional Sex Nuts or Security
Torx Screws available
Finishes
• GY - Grey
• BK - Black
Dimensions
Riser Diagram
Detex Limited Warranty
Front and Side View
2.10
3 Year Limited Manufacturer's
Warranty
7.70
2.375
Left-side mounting
X
Right-side mounting
X
Listings and Approvals
UL Classified
Miscellaneous Fire
“UL Listed”
Door Accessory
ANSI/BHMA Certified
A156.29
Door switch actuated
Double door application as shown
above available with EAX-500,
EAX-2500 and EAX-3500.
Note: Double door application as
shown above not available with
EAX-500W weatherized alarm.
October 23, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EXIT ALARMS
EAX-500W
Battery Powered Door Mounted Weatherized Exit Alarm
The Detex EAX-500W Weatherized Exit Alarm is designed for applications that require an alarm on secured
doors, particularly emergency exits that open to the outdoors or wet environment. The alarm, with approximately
100dB, will sound when an unauthorized exit occurs. The EAX-500W, with its redesigned shape and smaller
size, make it the choice for quick and easy installations on emergency exit and restricted doors and gates.
Shown with mortise cylinder
(cylinder sold separately)
Benefits
• Low cost, self-contained door
alarm with piezo horn that sounds
to warn unauthorized use of a
door or gate
• Weatherized for outdoor
environments
• Secure, tamper resistant housing
Features
• Patented plastic template allows
for foolproof alignment of internal
magnetic door contact and
accurate installation
• Alarm can only be silenced by
proper control key
• 9VDC battery operated with Low
Battery Alert
• Extended bypass (now a standard
feature) allows alarm to remain
bypassed when door is open and
automatically rearm upon door
closing
• LED visual and audible arming
indicators
• Modern graphics on cover to
demonstrate key rotation and
operation
• Field selectable status indicators,
if desired
• Tapered cover allows for
installation on narrow stile doors,
2" minimum
• Intelligent circuit senses
the external magnet location
automatically and sets the correct
door handing
• Patented cam assembly
automatically adjusts for different
sizes of cylinders without use of
spacers
• 100 dB piezo alarm
Mechanical Options/Accessories
• KS - Key Stop (Key removed only
• MC65 - Detex Mortise Cylinder
when armed)
pre-installed at factory
• OKC - Outside Key Control (Rim
Cylinder required)
• Quick, easy installation saves
time and money
• Field selectable 2-minute auto
rearm, if desired
• Weatherized electronics certified
to Driving Rain and Salt Fog Test
(see Listings and Approvals)
• IC7 - 7 pin interchangeable core
housing, pre-installed at factory
(Compatible with most standard
7 pin IC format cores)
Electrical Options
Other EAX Exit Alarms (non
Weatherized) Include:
• EAX-500 - Battery Powered
• EAX-2500 - AC Powered
• EAX-3500 - Timed Bypass and
Rechargeable Battery
Other Weatherized EAX Exit Alarms
Include:
• Inswinging door applications use
accessory PN 102644 (Inswing
Door Kit)
• Machine and sheet metal screws
(Std.)
• EAX-500W - Battery Powered,
Timed Bypass
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
Finishes
• GY - Grey
• BK - Black
Dimensions
Riser Diagram
Detex Limited Warranty
3 Year Limited Manufacturer's
Warranty
Front and Side View
2.10
7.70
2.375
Left-side mounting
Front View
Right-side mounting
Side View
Listings and Approvals
“UL Listed Miscellaneous
Fire Door Accessory”
MIL-STD 810F, Method 506.4
(Driving Rain Test)
MIL-STD 810F, Method 509.4
(Salt Fog Test)
ANSI/BHMA
A156.29
October 23, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
-2500
HOW TO ORDER
IN = Includes 220 Transformer
EXTENDED BYPASS
0 = Alarm must be manually turned off; or may
be field selected for 2 min. Auto Re-arm
3 = Alarm must be manually turned off; or may
be field selected for 10 min. Auto Re-arm
4 = Alarm must be manually turned off; or may
be field selected for 20 min. Auto Re-arm
EAX-25 0 0
x
277 = Includes 277 Tranformer
MC65 = Mortise Cylinder,
factory installed
None = Gray (Std.)
BK = Black
Color
IC7 = 7-pin IC Cylinder Housing
(core not included),
factory installed
L9 = Remove 9 volt Backup Battery
SI = Status Indicator On
x Signage x Cylinders x Misc. Options x
Example Order
Number
ARMING DELAY
0 = 15 Second Arming Delay
1 = 1 Second Arming Delay
2 = 5 Second Arming Delay
BACK BOX
None = No back box (Std.)
S = Surface Mounting
F = Flush Mounting
SK = Surface Kit: Surface
mount back box, 24 VAC
transformer, surface door
contacts
None = Red w/wht letters English
KS = Key Stop, factory installed
RWS = Red w/wht letters Spanish
RWC = Red w/wht letters Chinese
GWE = Green w/wht letters English
Contact factory for other languages
FK = Flush Kit: Flush mount
back box, 24 VAC
transformer, flush door
contacts
C = Conversion kit for retrofit
from EA-2500F
December 6, 2011
Power
SERIES
EAX-2500
AC/DC External Powered Wall Mount Exit Alarm
The Detex EAX-2500 Series Exit Alarm is designed for applications requiring a hardwired AC/DC alarm on secure
doors. The alarm, with approximately 100dB, will sound when an unauthorized exit occurs. The smaller size
of the EAX-2500, which is designed to fit in a standard 4"x4" outlet box, makes it the choice for quick and easy
installations on emergency exit and restricted doors.
Specify EAX-2500SxMC65
Specify EAX-2500SxBKxMC65
Benefits
• Field selectable features allow
customer to choose status
indicators and auto rearm options
• Easy to install using ordinary tools
to save time and money
• Available in either gray or black
to blend with any décor
• 100dB piezo horn provides
security for restricted doors
• New graphics on cover are easy
to understand and make key
operation simple
Features
• Surface and flush mount available
using 4"x4" double switch/outlet
box
• AC/DC hardwired power with
optional 9VDC backup battery
• Tamper resistant housing and
cover protects electronics
• Low battery alert is field selectable
• Extended bypass allows alarm to
remain silenced when door is
open and automatically rearm
upon closing of door
• Patented cam assembly
automatically adjusts for different
size cylinders without spacers
• Silent arming feature is field
selectable
• Inside Key Control uses mortise
cylinder with standard Yale cam
Mechanical Options
• KS - Key Stop (Key removed only
when armed)
• EAX-2500 Flush or Surface
• Relay output for signaling external
accessories
• EAX-2500FK1 - Complete kit
contains alarm, warning sign,
flush back box, flush magnetic
switch and 24VAC transformer
(add suffix “xMC65 or xIC7” to
include factory installed cylinder)
• EAX-2500SK1 - Complete kit
contains alarm, warning sign,
surface back box, surface
magnetic switch and 24VAC
transformer (add suffix “xMC65
or xIC7” to include factory installed
cylinder)
Other EAX Exit Alarms Include
• EAX-500 - Battery Powered
• EAX-3500 - Timed Bypass and
• EAX-500W - Weatherized
Rechargeable Battery
Battery Powered
Accessories
• IC7 - Interchangeable mortise
cylinder (can be factory installed)
• MC65 - Mortise cylinder (can be
factory installed)
• EAX-300 - Door Prop
• EAX-300W - Weatherized Door
Prop
• Optional Cylinder Nut Wrench
P/N: 103779
• MS-2049, MS-1039, MS-1059 Magnetic Switch
Dimensions
Detex Limited Warranty
Riser Diagram
Front and Side View
T
x
3.00
1.00
3 Year Limited Manufacturers
Warranty
T
x
4.65
4.60
Surface Mount
Side View
Surface Mount
Front View
Surface mounting
Flush mounting
3.11
T
1.00
4.65
4.60
4.00
Flush Mount
Side View
Flush Mount
Front View
Door switch actuated
Double door application as shown
above available with EAX-500,
EAX-300, EAX-2500 and EAX-3500.
Note: Double door application
as shown above not available
with EAX-300W or EAX-500W
weatherized alarms.
October 23, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EXIT ALARMS
EAX-3500
Timed Bypass Exit Alarm and Rechargeable Battery
The Detex EAX-3500 is designed for applications requiring a hard-wired, timed-bypass alarm with rechargeable
backup battery. The 100dB alarm will sound when someone attempts an unauthorized exit. The EAX-3500 can
be temporarily bypassed for deliveries and trash removal, but reminds manager to close and secure the door.
Shown with cylinder (mortise
cylinder sold separately)
Benefits
• Allows manager to temporarily
bypass the alarm, but does not
allow the alarm to be turned off
• Reminds manager to close and
secure the door, minimizing door
prop time
• Minimizing door prop time reduces
exposure to theft and threat of
robbery
• Simple, on-the-cover instructions
make operation easy
• Alarm demands attention even in
noisy environments
• Tamper-resistant housing and
circuits prevent dishonest
employees from defeating alarm
• Minimizing door prop time saves
energy costs
• LEDs illustrate armed status and
bypass time, allowing quick easy
reference
• Mortise cylinder sold separately,
allowing alarm to be keyed to
existing master-key system,
helping to maintain key control
Features
• Hard-wired low voltage power
with rechargeable battery insures
uninterrupted secure power feed
• 100dB alarm, powered by 12
to 24 VAC and rechargeable
backup battery (included)
• Accepts 5, 6 or 7-pin standard and
interchangeable core mortise
cylinders with a standard Yale cam
• Maximum allowable bypass time
can be factory set or fieldadjusted to 5, 10, 20 or 40
minutes
• Low battery alert
• Bypass time is easily set using
two simple slide jumpers, located
inside secured enclosure
• Timed bypass allows alarm to
remain bypassed for allotted
minutes, automatically rearming
upon door closing
• Patented cam assembly
automatically adjusts for different
size/length cylinders without
the use of additional spacers or
cylinder collars
Mechanical Options
• EAX-3500 includes surface
mount timed-bypass alarm,
rechargeable battery
(mortise cylinder sold separately)
• Rechargeable backup battery
provides 72-hours of operation
• EAX-3500SK includes surface
mount timed-bypass alarm,
rechargeable battery, surface
magnetic switch and plug-in
24VAC transformer
(mortise cylinder sold separately)
• Resetting the alarm can only be
accomplished with a control key
• EAX-3500FK includes flush mount
timed-bypass alarm, rechargeable
battery, flush magnetic switch
and plug-in 24VAC transformer
(mortise cylinder sold separately)
Accessories
• IC7 - Interchangeable core
mortise cylinder
• Optional Cylinder Nut Wrench
P/N: 103779
• MC65 - Mortise cylinder
Technical Information
• Machine and Self Drilling Screws
(Std.)
• Amp Draw - .083 Amps @ 24 VDC
(Alarmed)
- .110 Amps @ 24 VDC
(Door Prop)
Dimensions
Back - Side View
Front View
Cover - Side View
.50
8.13
8.13
4.0
Riser Diagram
Transformer
110V Input to transformer
Listings and Approvals
“UL Listed”
Detex Limited Warranty
3 Year Limited Manufacturers
Warranty
ANSI/BHMA Certified
A156.29
DETEX
EAX-3500
October 23, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
BK = Black
* None = Gray (Std.)
SK1 = Kit allows for wall mounting,
includes (1) MS-1039S door
contact - Add $45
SK2 = Kit allows for wall mounting,
includes (2) MS-1039S door
contacts - Add $90
SK3 = Kit allows for wall mounting,
includes (1) MS-1059S door
contact - Add $45
SK4 = Kit allows for wall mounting,
includes (2) MS-1059S door
contacts - Add $80
SK5 = Kit allows for wall mounting,
includes (1) MS-2049 door
contact - Add $83
SK6 = Kit allows for wall mounting,
includes (2) MS-2049 door
contacts - Add $166
NOTE: * = default
W = Weatherized - Add $106
Contact factory for other languages
GWE = Green w/wht letters English
RWC = Red w/wht letters Chinese
RWS = Red w/wht letters Spanish
None = Red w/wht letters English
KS = Key Stop, factory
installed - Add $5
July 2, 2012
SI = Status Indicator On - Add $5
0 0 x Enhancements x Color x Signage x Cylinders x Miscellaneous x Kits x Other Options
DOOR PROP DELAY
0 = 15 seconds
Example Order
Number
EAX-3
MODE
* 0 = Door Prop
1 = Door Chime
HOW TO ORDER
* “__” = No Cylinder
C65 = Mortise Cylinder,
factory installed - Add $60
IC7 = 7-pin IC Cylinder Housing
(core not included),
factory installed - Add $60
IK7 = Cylinder InstaKey Housing
(core not included),
factory installed - Add $80.00
-300
EXIT ALARMS
EAX-300
Battery Powered Door Propped Alarm
The Detex EAX-300 Series is designed for applications where doors may be used for egress or ingress, but
may not be held or propped open. Door open times from 1 second to 4 minutes (15 second default) are field
selectable. The smaller size makes installation quick and easy.
Shown with mortise cylinder
(cylinder sold separately)
Benefits
• Low cost, solution to propped
open doors
• Helps keep energy costs down by
ensuring doors are closed
• Quick, easy installation saves
time and money
• Alarm silences when door is
closed, no waiting for key-holder
to arrive
Features
• Secure, tamper resistant housing
• Patented plastic template assures
accurate installation by providing
foolproof alignment with internal
magnetic door contact
Mechanical Options
• EAX-300 may be ordered in
several kit configurations:
SK1 Kit allows for wall mounting
and includes (1) white MS-1039S
door contact
SK2 Kit allows for wall mounting
and includes (2) white MS-1039S
door contacts
SK3 Kit allows for wall mounting
and includes (1) brown MS-1059S
door contact
• Tapered cover allows for
installation on narrow stile doors,
2” minimum
• Intelligent circuit senses the
external magnet location
automatically and sets the
correct door handing
SK4 Kit allows for wall mounting
and includes (2) brown MS-1059S
door contacts
SK5 Kit allows for wall mounting
and includes (1) grey MS-2049S
door contact
SK6 Kit allows for wall mounting
and includes (2) grey MS-2049S
door contacts
• 100 dB piezo alarm
• 9VDC battery operated with Low
Battery Alert
• LED visual arming indicators
• KS - Key Stop, factory installed
• SI - Status Indicator On
Electrical Options
• Weatherized for use on gates
or doors that are subjected to
inclement weather
Accessories
• MC65 - Mortise Cylinder
• IC7 - 7 pin IC Cylinder Housing
• IK7 - Cylinder InstaKey Housing
Technical Information
• Machine and self-drilling screws
• Optional Cylinder Nut Wrench
P/N: 103779
Finishes
• GY - Grey
• BK - Black
Dimensions
Riser Diagram
Detex Limited Warranty
3 Year Limited Manufacturers
Warranty
Front and Side View
2.10
7.70
2.375
Left-side mounting
X
Right-side mounting
X
.313"
Mortise
Cylinder
(sold
separately) dimensions .715"
approximate
Door switch actuated
Listings and Approvals
“UL Listed Miscellaneous
Fire Door Accessory”
ANSI/BHMA
A156.29
October 23, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EXIT ALARMS
EAX-300W
Battery Powered Weatherized Door Propped Alarm
The Detex EAX-300W Series is designed for applications where doors that open to the outdoors or wet
environments may be used for egress or ingress, but may not be held or propped open. Door open times from 1
second to 4 minutes (15 second default) are field selectable. The smaller size makes installation quick and easy
on doors or gates.
Shown with mortise cylinder
(cylinder sold separately)
Benefits
• Low cost, solution to propped
open doors
• Helps keep energy costs down by
ensuring doors are closed
• Weatherized for use on gates
or doors that are subjected to
inclement weather
• Quick, easy installation saves
time and money
• Alarm silences when door is
closed, no waiting for key-holder
to arrive
Features
• Secure, tamper resistant housing
• Patented plastic template assures
accurate installation by providing
foolproof alignment with internal
magnetic door contact
• Weatherized electronics certified
to driving rain and salt fog test
(see Listings & Approvals)
Mechanical Options
• KS - Key Stop, factory installed
(always armed when key
removed)
• Tapered cover allows for
installation on narrow stile doors,
2” minimum
• Intelligent circuit senses the
external magnet location
automatically and sets the
correct door handing
• 100 dB piezo alarm
• 9VDC battery operated with Low
Battery Alert
• LED visual arming indicators
• SI - Status Indicator On
Accessories
• MC65 - Mortise Cylinder
• Optional Cylinder Nut Wrench
P/N: 103779
• IC7 - 7 pin IC Cylinder Housing
• IK7 - Cylinder InstaKey Housing
Electrical Options
Other EAX Door-Propped Alarms
(non Weatherized) Include:
• EAX-300 - Battery Powered
Other EAX Exit Alarms (non
Weatherized) Include:
• EAX-500 - Battery Powered
• EAX-2500 - AC Powered
• EAX-3500 - Timed Bypass and
Rechargeable Battery
Other Weatherized EAX Exit Alarms
Include:
• EAX-500W - Battery Powered,
Timed Bypass
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Inswinging door/gate applications
use accessory PN 102644
(Inswing Door Kit)
Finishes
• GY - Grey
• BK - Black
Dimensions
Riser Diagram
Detex Limited Warranty
3 Year Limited Manufacturers
Warranty
Front and Side View
2.10
• Machine and self-drilling screws
7.70
2.375
Left-side mounting
Right-side mounting
.313"
Mortise
Cylinder
(sold
separately) dimensions .715"
approximate
“UL Listed Miscellaneous
Fire Door Accessory”
Listings and Approvals
UL1034 - 34 Temperature Section 34
[Temperature Range -31° F (-35° C) to
150° Listed
F (+66° C)]
“UL
Miscellaneous
Fire Door Accessory”
UL1034 - 54 Dust Section 54
UL1034
34 Temperature
MIL-STD-810F,
Method 506.4Section 34
[Temperature Range -31° F (-35° C) to
(Driving Rain Test)
150° F (+66° C)]
MIL-STD 810F, Method 509.4
UL1034
54 Dust Section 54
(Salt Fog- Test)
MIL-STD
810F, Method 506.4
ANSI/BHMA
(Driving
A156.29 Rain Test)
MIL-STD 810F, Method 509.4
(Salt Fog Test)
ANSI/BHMA
A156.29
October 23, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
SERIES
EAX-411SK
Door Prop Alarm
The EAX-411SK AC powered door prop alarm provides a unique solution to the common security
challenge associated with doors that are propped open. Helping to enhance access control systems
and provide additional perimeter security, the EAX-411SK provides a custom fit for each opening with
its 0 to 60 second adjustable “door open” time. When a door is left open longer than the set time, the
alarm will sound. The EAX-411SK will automatically reset when the door is closed.
Specify the EAX-411SK kit which includes the ES-411, finished S1 back box, plug-in transformer and
MS-1039S magnetic switch.
Benefits
• Alarm encourages door users to
keep door closed
• Eliminating door propping helps
save on energy costs
• Localized alarm notifies area
personnel of security breach/ door
prop condition
Features
• Stand alone device
• Integrates into any access control
system
• Kit includes transformer and
magnetic door contact
• Remote relay allows monitoring
of door status from management
office or guard station
• Reduces false alarms
• 90dB alarm easily warns of door
prop status
• Automatic alarm reset/rearm upon
closure of door
• Adjustable alarm delay time 0 to
60 seconds
• Mounts in a 1 gang box (included
in SK Kit)
• Alarm status relay for remote
annunciation (zone monitoring)
• Flush mount, aesthetically
pleasing
Technical Information
• 12 or 24 VAC/VDC @ 70 mA
Finishes
• Input - Normally Closed Door
Contact
• Output - Normally Closed Door
Held Alarm (500mA @ 30VDC)
Riser Diagram
• Painted Beige
Dimensions
DOOR CONTACT
EAX-411SK
2-3/4" Wide x 4-5/8" High x 2" Deep
Detex Limited Warranty
3 Year Limited Manufacturers
Warranty
October 23, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
SERIES
EAX-4200
Door Management Alarm
The EAX-4200 Series Door Management Alarm offers door prop/door held, intrusion/door forced, and
exit alarm detection capabilities to provide complete monitoring of access control points in one easy to
use master unit. The DMA may also be used as a stand-alone device. The unit is typically mounted
near the monitored door.
Specify the EAX-4200SK kit which includes ES4200-K4, RC65 rim cylinder, S3 finished back box,
TP-24 plug-in transformer and MS-1039S mag switch.
Benefits
• Audible warning reduces false
door held alarms
• Flexible interfacing with electric
door locks
• Reduces workload of security
personnel
• Compatible with all access control
systems
• Aesthetically pleasing design
• Tamper resistant
• Encourages employees to
maintain access control
procedures
• Can be used as a stand-alone
product
• Easy installation
Features
• Kit packaging provides all
required accessories in one box
• Automatic alarm reset/rearm upon
closure of door
• Field selectable alarm timing and
alarm delay option
• Mounts in a 3 gang box (included
in kit)
• Alarm status relay for remote
annunciation
• Uses standard rim cylilnder
• Field selectable high or low
level sounder
• Visual Status indicator
• Incorporates form C output relays
• Flush mount
• Reset/bypass keyswitch and
remote input
Mechanical Options
• Key switch for alarm/shunt
override
• Timer settings are field adjustable
Electrical Options
• Voltage sense input
• 4 separate Form C contacts 1Amp @ 30VDC
Technical Information
• 12 to 24VAC/VDC @ 250 mA
• 96 and 103dB field selectable
Finishes
• Painted aluminum
Dimensions
Riser Diagram
EAX-4200SK
EAX-4200SK
• 6.4" w x 4.5" h x 2.32" d
Detex Limited Warranty
3 Year Limited Manufacturers
Warranty
November 1, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
REMOTE ALARMS
CS-940/950F; CS-940/950S; CS-2940/2950F; CS-2940/2950S
The CS-900/2900 Series Remote Alarms are designed to sound an alarm when a signal is sent from
a door switch or another alarm. The piercing 100dB alarm will alert management of a security breach
even in a noisy environment. When the cause of the alarm has been secured, the remote alarm is
automatically silenced.
CS-900/2900F Series
Flush Remote Alarm
Benefits
• No cylinder required
• No cover lock required
CS-900/2900S Series
Surface Mounted
Remote Alarm
• Silencing the main alarm
automatically resets the remote
alarm.
• Saves cost
Features
• LED’s (green and red)
• Installed in a double switch/
outlet box (flush units)
Technical Information
• 9 VDC
• Monitors an open loop
Dimensions
Riser Diagram
Front and Side View
12VAC
3.00
1.00
Remote
Alarm
4.65
4.60
Surface Mount
Side View
Surface Mount
Front View
3.11
1.00
4.65
4.60
4.00
Flush Mount
Side View
November 1, 2012
Flush Mount
Front View
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
MAGNETIC SWITCH
MS-2049F, MS-2049S, MS-2049SC, MS-2049SI
These magnetic switches are designed primarily to serve as sensing devices to detect the opening of a
door or window; to assure that a protected door is securely under surveillance; to serve as a trigger for
a wall-mounted Detex Exit Alarm; to signal that a door has been inadvertently left open; and to be used
as a direct switch to set off many kinds of audio and visual alarms.
MS-2049F Flush
Magnetic Switch
MS-2049S Surface Mounted
Magnetic Switch
Benefits
• Provides assurance that protected
doors are under surveillance
MS-2049SC Surface Mounted
Magnetic Switch
with conduit connector for use
with thin-wall conduit
MS-2049SI Surface Mounted
Magnetic Switch
for In-Swinging Doors
• Serves as a trigger for alarms or
remote monitors
• UL listed for use on fire rated
doors and assemblies
• Easy installation with concealed
wiring and color coded leads
• Wide range of alarm and signal
applications
• Surface mounted units are housed
in a durable high impact ABS
thermoplastic, a UL listed material
used in the manufacture of
telephones, auto bodies, etc.
• Minimizes false signals due to
loosely closed doors
• Maximum contact ratings 24VDC @ .5A
• Overhead (preferred) or latch-stile
mounting available for all models
• For use on steel, aluminum or
wood doors and frames
• Switch - single pole, double throw
(SPDT)
• The flush device (MS-2049F)
should have the switch contact
housed in the door frame and the
magnet mortised in the edge of
the door
Features
• Tamper protection - mounting
screws inaccessible when door
closed
• Components potted to protect
against shock and moisture
• Switch rated for over one million
operations under load
Technical Information
• May be mounted on stiles as
narrow as 1-3/8"
• Wiring leads, 12" long, color
coded, concealed
Dimensions (MS-2049F)
<
>
4 7/8”
<
<
Switch unit in jamb
or header
<
6”
^
<
Magnet unit in
edge of door
Latch edge
mounting
<
<
CL
3 5/16”
4 1/8”
^
1½” min.
1” min.
>
^
6”
Plaster Guard
^
Overhead mounting (preferred)
<
1 ¼”
CL
>
^
^
Riser Diagram
¼ max.
<
>
>
15”
16
Overhead Installation, Side View
Overhead Installation, Front View
Dimensions (MS-2049S)
DOOR
DOOR FRAME
¼” Max.
¼” Max.
^
^
Listings and Approvals
^
LISTED
“UL Listed Miscellaneous
Fire Door Accessories”
“UL Listed Door Position
Switch”
^
<
5 3/16”
>
<
1 17/32”
>
Side View
Front View
Detex Limited Warranty
3 Year Limited Manufacturers
Warranty
October 23, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
MAGNETIC SWITCH
MS-1039F, MS-1039S, MS-1059F, MS-1059S
These magnetic switches are designed primarily to serve as sensing devices to detect the opening of a
door or window; to assure that a protected door is securely under surveillance; to serve as a trigger for
a wall-mounted Detex Exit Alarm; to signal that a door has been inadvertently left open; and to be used
as a direct switch to set off many kinds of audio and visual alarms.
MS-1039F (White) / MS-1059F (Brown)
Flush Magnetic Switch
(MS-1059F Shown)
MS-1039S (White) / MS-1059S (Brown)
Surface Mounted
Magnetic Switch
(MS-1059S Shown)
Benefits
• Anti-Tamper Design
• Serves as a trigger for alarms or
remote monitors
Features
• Polarity selection is non-critical
• Provides assurance that protected
doors are under surveillance
• BMS - Balanced Magnetic Switch
provides improved security
• Simple Installation
• Flush switches are self-locking
• Color selection white/brown
• Durable Magnet
• Wide range of alarm and signal
applications
• Surface switches have Max.
Contact rating 30VDC @ 250mA
• Overhead (preferred) or latch-stile
mounting available for all models
• Flush switches have Max.
Contact rating 28VDC, 0.5A, 10W
• Switch - single pole, single throw
(SPST)
• The MS-1039F (Flush mount)
should have the switch contact
housed in the door frame and the
magnet mortised in the edge of
the door
• For use on steel, aluminum or
wood doors and frames
• Normally closed contact
• Flush switches are solid, onepiece design with no need for
extra donut adapters
Technical Information
Finishes
• MS-1039F/S - White
• MS-1059F/S - Brown
Riser Diagram
Dimensions (MS-1039F/MS-1059F)
Overhead mounting (preferred)
<
<
6”
<
6”
<
Latch edge
mounting
Dimensions (MS-1039S/MS1059S)
Detex Limited Warranty
3 Years Limited Manufacturers
Warranty
November 1, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
REDI
KEY
REDIKEY KEY VAULT
FS-3000 FS-3000S
The RediKey by Detex is a quick access system designed to provide emergency personnel rapid
access to multiple buildings without having to carry numerous keys or change and alter existing locks.
When these personnel arrive at the entry door, they unlock the keysafe with a key designed to open
all building key safes in their area. They then remove the building entry key and unlock the door to
provide the service needed. Featuring the Medeco patented biaxial high-security, drill resistant,
mortise cylinder, the RediKey offers the highest security for your building’s access key.
Benefits
• Around-the-clock, on-the-spot
controlled access for the immediate
security or support requirements of
your business
• One key allows rapid entry to
multiple buildings/facilities
Features
• Pickproof, drill resistant,
MEDECO® mortise cylinder
• Restricted Detex Key Control
level prevents unauthorized key
duplication
Electrical Options
• Maintained, SPDT switch for use
on automatic gates
• Empowers approved services like
fire departments, police
departments, guard service,
janitorial services, armored guard
services to respond quickly and
decisively
• Reduces the costs of managing a
large inventory of building facility
keys
• Burglar-proof, hardened steel
weather-resistant vault casing
• Simple installation usually requires
less than 1 hour of labor for doors
up to 3” thick, walls and free
standing posts
• Tamperproof mounting hardware
• UL rated anti-theft device
• Designed for highest security from
attack and vandalism
Accessories
Dimensions
Detex Limited Warranty
• Padlock with steel shackle resists
cutting or pulling attack
* Dimensions:
4 1/4” long, 1 3/4” diameter
3 Year Limited Manufacturers
Warranty
Cylinder Installation
* Weight: 2 1/2 pounds
TEFLON RING
FS-3057
KEY EXTRACTOR
FS-3046
BUILDING KEY
CYLINDER
FS-3080
FS-3059, KEY,
(NOT SUPPLIED)
FS-3059,
KEY (SOLD
SEPARATELY)
October 23, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
ACCESSCONTROL
STAND ALONE KEYPADS
DTX-2100 Series
Single Door Stand Alone Keypad
The DTX-2100 keypad uses hardened backlit keys and the DTX-2110 uses metal Braille alphanumeric keys to ensure long-term durability and high-quality performance. DTX-2100/2110 keypads
are designed for both indoor and outdoor surface/flush mount applications. The DTX-2120 mounts
directly to mullion door frames or most flat surfaces with no backbox required. The convenience of the
built-in doorbell feature on the DTX-2120 with the sleek design make it an easy choice for entrance
installations. The electronics for each keypad are conformal coated in order to provide excellent
protection from the elements.
DTX-2100
(Backlit
Keypad)
Benefits
• Affordable single-door security
application in new or exisiting
structures
DTX-2120
(Mullion Mount
Backlit Keypad)
DTX-2110
(Durable Metal
Keypad - with
braille)
• Dependable service and security
in most environments
• Multi-user capabilities
• Easy installation
• Controls unauthorized access/
egress
• Flexible programming capable
Features
DTX-2100
DTX-2110
DTX-2120
• 500 users
• 500 users
• 120 users
• Single gang flush mount design
• Single gang flush mount design
• Surface mount - fits on door mullion
• Backlit hardened keys
• Metal braille alpha-numeric keys
• Backlit hardened keys
• Polycarbonate trim
• Brushed metal trim
• Aluminum enclosure
• Conformal coating
• Conformal coating
• Conformal coating
• Light/Medium Duty
• Harsh conditions/Heavy duty
• Light/Medium duty
• Key press feedback via sounder
and yellow LED
• Key press feedback via sounder
and yellow LED
• Door position monitoring
• Built-in assignable sounder
• Bi-color Red/Green LED indicates
relay status
• Indoor/outdoor use
• Keypad programmable
• DTX-4000 Hub Manager
Compatible
• 3 year warranty
• UL 294 Listed
• Built-in assignable sounder
• Door ajar, forced door, alarm shunt
outputs
• Bi-color Red/Green LED indicates
relay status
• Sounder
• Indoor/outdoor use
• Indoor/outdoor use
• Door bell relay
• Keypad programmable
• 3 year warranty
• DTX-4000 Hub Manager
Compatible
• UL 294 Listed
• 3 year warranty
• UL 294 Listed
Features Continued
DTX-2100
DTX-2110
DTX-2120
• Relay Contact Rating 2A @
30VAC/DC (Main & Aux.)
• Relay Contact Rating 2A @
30VAC/DC (Main & Aux.)
• 3 - 1 amp SPDT relays in
controller
• Door Position Inputs
• Door Position Inputs
• Door Position Inputs
• Request to Exit Input
• Request to Exit Input
• Request to Exit Input
• Alarm Shunt
• Alarm Shunt
• Alarm Shunt
• Temperature tolerance: -20F to
130F
• Temperature tolerance: -20F to
130F
• Temperature tolerance: -20F to
130F
• Power Supply - Plug-In
Detex P/N - TFMR12 (12VDC)
90-800
• Electric strike or other locking
device powered at 12 or 24 VAC
up to 2 amps
Technical Information
• 10-30 VDC; 12-24 VAC
auto-adjusting
• 30 mA
• Transformers - Hard Wired
Detex P/N - PP-5152-2 (24 VAC)
PP-5152-3 (12 VAC)
(Contact Factory for additional Power Supply
Options)
Dimensions
Riser Diagram
Power
for strike
12 or 24
VAC / VDC
110 VAC
T
DTX-2100 and DTX-2110
T 10-30 VDC
12-24 VAC
DTX-2120
Backbox
1.89”
DTX-2100
Strike
12 or 24
VAC / VDC
<
^
2.75”
>
U.L. 294 Listed
October 23, 2012
^
1.71”
>
<
> 1.13”
^
^
4.5”
4.5”
^
^
Front View
Listings and Approvals
< > < > .6”
<
Side View
Detex Limited Warranty
3 Year Limited Manufacturers
Warranty
6.48”
6.48”
^
^
Front View
Side View
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Stand-Alone Proximity Reader/Keypad
DTX-2300 Series
Single Door Stand Alone Proximity Reader/Keypad
The DTX-2300 is a stand alone single door access control with a proximity reader and keypad. The DTX-2300,
when used on it’s own, provides cost effective standard access control functionality with the use of it’s two relays
and two inputs for request to exit and door position. The proximity reader is capable of being mounted up to a
maximum of 10 feet away from the DTX-2300 (see image below).
Keypad
Reader
Remove proximity reader
from keypad to mount
reader and wire up to 10
feet away from DTX-2300
keypad.
Reader/Keypad
Features
• Proximity reader and keypad
• Bi-color LED to indicate operation
• Weather resistant design
• 2000 Users
• HID 26 - 40 bit format card
compatibility
• Remote proximity reader mounting
and glass mount option
• Weigand compatible
• No audit trail available in stand
alone unit
• HID Corporate 1000 compatible
•UL 294 Listed
Technical Information
• Dimensions: 2.75” W x 5.25” H x
1.38” D
• Main relay: Form C 2 amp SPDT
controls lock
• Operating voltage: 12 VDC only
• Auxiliary Relay: Form C 1 amp
SPD
• Temperature tolerance: -31F to
150F
•3 year warranty
• Request to Exit Input
• Indoor / outdoor use
Riser Diagram
Power
for strike
12 or 24
VAC / VDC
FROM 120V SOURCE
110 VAC
T
T 12 VDC
J
6 CONDUCTOR
RECOMMEND 18AWG (MINIMUM)
12VDC Transformer
J
DTX-2300
Strike
12 or 24
VAC / VDC
4 CONDUCTOR
RECOMMEND 18AWG (MINIMUM)
Dimensions
DTX-2300 Stand Alone
<
^
2.75”
>
5.25”
Outside Inside
J
^
^
Front View
J
< > 1.38”
5.25”
^
DETEX ALARMED
PANIC HARDWARE
2 CONDUCTOR
RECOMMEND 18AWG
(MINIMUM)
Side View
4 CONDUCTOR
RECOMMEND 18AWG
(MINIMUM)
FLEXIBLE CONDUIT WITH
CONNECTIONS SUPPLIED
WITH DETEX PANIC HARDWARE
ELECTRIC STRIKE
Listings and Approvals
Detex Limited Warranty
3 Year Limited Manufacturers
Warranty
U.L. 294 Listed
November 1, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
4000 SERIES ACCESS CONTROL
-
HOW TO ORDER
0 = Backlit Hardened Keys *
Interface Connection
NDESK = Network (Desktop)
1 = Metal Braille Keys
NCAN = Network (Can)
2 = Mullion
USB = USB Serial*
Design
DTX-4
1
0
2
x
USB
Example Order
Number
SYSTEM (DTX-4XXX)
1 = 1 Door System (4 door capable)
2 = 2 Door System (4 door capable)
3 = 3 Door System (4 door capable)
4 = 4 Door System
5 = 5 Door System (8 door capable)
6 = 6 Door System (8 door capable)
DEVICE
1 = Keypad*
7 = 7 Door System (8 door capable)
3 = Keypad and Card Reader
9 = 9 Door System (12 door capable)
8 = 8 Door System
10 = 10 Door System (12 door capable)
11 = 11 Door System (12 door capable)
12 = 12 Door System
(Specify - Up to 16 door systems)
1M = Single door audit with DTX-4001*
* Default if left blank
August 30, 2012
ACCESS CONTROL SYSTEM
DTX-4100 Series
Multi-Door Access System with Keypad and USB or Network
The Multi-Door access system with software is “access simplified”. The system is powerful and easy to
install and program for small to mid-sized applications. It provides a secure and trusted access control
system that uses proven hardware architecture. System management from a PC can be either over a
LAN/WAN connection or through a RS485 serial connection. All individual door access decisions and
transaction events are stored at the module. Programming is done via LAN, WAN, or RS-485, using
the Hub Manager Professional Software. System expansion is made simple with the modular design
of the two available configurations (DTX-4004 or DTX-4001). The DTX-4004 provides the simplest
expansion of one to four doors per cabinet when the system needs to be installed in a central location.
The DTX-4001 configuration (single door control system) is ideal for applications where the doors are
far apart and/or the control is located at the door.
Cabinet (DTX-4004)
Space for one to four door modules
(3 shown with room for 1 more)
Keypads (3)
Modules (3)
Software
USB Comm
AC
Transformer
Example shown:
DTX-4103xUSB
Benefits
• Affordable multi-door security
application in new or exisiting
structures
• Fast and reliable communications
Features
DTX-410X (X denotes # of doors)
• 2000 users per door
• Network up to 16 doors
• 2000 transaction storage per door
• First-In auto unlock
• 8 time zones per door
• 15 Single date holidays per door
• 15 Block date holidays per door
• Error Lockout
Technical Information
• Relay Contact Rating for
DTX-4100 or DTX-4110: 2A@
30VAC/DC (Main & Aux.)
and Relay Contact Rating for
DTX-4120: 3 - 1 amp
SPDT relays in controller
• Dependable service and security
in all environments
• Multi-user capabilities
• Easy installation
• Controls unauthorized access/
egress
• Flexible programming capable
• Supports adjustable Daylight
Savings Time
• Programmable with Hub Manager
Professional Software 7.2 or
higher
• Serial connection made with
USB to 485 converter
• Single gang flush mount design
• Keypads: Backlit hardened keys,
durable metal (with braille) keys or
mullion mount backlit keys
• Request to Exit Input
• Independent Outputs
• Configurable Outputs
• Wiegand Outputs
• Polycarbonate trim
• Conformal coating
• Key press feedback via sounder
and yellow LED
• Built-in assignable sounder
• Bi-color Red/Green LED indicates
relay status
• Indoor/outdoor use
• 3 year warranty
• UL 294 Listed
Technical Information Continued
• Operating Voltage: 16.5 VAC
40 VA Class 2 Transformer
(Plug-In Transformer included)
• Current Requirements: 100mA
(backplane & 1 module) add 40mA
for each module / DTX-4004 Current Requirements: 120mA
• Alarm shunt, door ajar, forced door
outputs: 12-24 VAC/DC 1mA each
• Temperature tolerance:
-20F to 130F
• DTX-4004 / DTX-4001: Indoor
use only
Riser Diagram
Centralized Configuration
Power
for strike
12 or 24
VAC / VDC
To network/PC
To next DTX-4004
110 VAC
T
T 10-30 VDC
12-24 VAC
DTX-4100
Strike
12 or 24
VAC / VDC
The DTX-4004 cabinet
is placed in a central “secure”
location, and all wiring is run
back from each door to the
DTX-4004
REX
REX
REX
DOOR 02
DOOR 01
DOOR 03
DOOR 04
Dimensions
DTX-4100 and DTX-4110
1.89”
<
^
2.75”
^
4.5”
<
^
< > < > .6”
>
Listings and Approvals
DTX-4120
Backbox
1.71”
<
>
> 1.13”
U.L. 294 Listed
^
6.48”
6.48”
4.5”
^
^
Front View
Front View
DTX-4004
<
^
16.5”
Detex Limited Warranty
^
^
Side View
Side View
DTX-4001
<
>
> 4.25”
<
^
^
19.5”
Front View
>
< > 3.56”
^
^
Front View
Side View
3 Year Limited Manufacturers
Warranty
11.29”
^
^
^
11.31”
11.29”
19.5”
REX
Side View
How to Order
Interface Connection
NDESK = Network (Desktop)
NCAN = Network (Can)
USB = USB Serial
Misc. Options
0 = Backlit Hardened Keys *
1 = Metal Braille Keys
2 = Mullion
DTX-4
Example Order
Number
1
2
Device
1 = Keypad
3 = Keypad/Card Reader
7
x
USB
SYSTEM
1 = 1 Door System (4 door capable)
1 = 1 Door System (4 door capable)
2 = 2 Door System (4 door capable)
3 = 3 Door System (4 door capable)
* Default if left blank
4 = 4 Door System
5 = 5 Door System (8 door capable)
6 = 6 Door System (8 door capable)
7 = 7 Door System (8 door capable)
8 = 8 Door System
(Specify up to 16 door systems)
October 23, 2012
M = Single door audit with DTX-4001
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
ACCESS CONTROL SYSTEM
DTX-4300 Series
Multi-Door Access System with Proximity Reader/Keypad and USB or Network
The DTX-4300 Series is a fully integrated PC managed multi-door access system with a proximity reader and
keypad. The DTX-4300, when used on it’s own, provides standard access control functionality with the use of it’s
two relays and two inputs for request to exit and door position, and enhanced system functionality when used with
Hub Manager Professional software. The software allows the management of people and doors through easy to
create reports and step by step wizard assisted expanded feature functionality. The software can communicate
to the DTX-4300 either through a 485 connection, or on a LAN/WAN using the SEG-1 TCP/IP communication
device. By utilizing the proximity reader and keypad together, a higher level of security is achieved by requiring
both to grant access. The DTX-4300 can be directly mounted to a single gang electrical box or to most flat
surfaces. The proximity reader is capable of being mounted up to a maximum of 10 feet away from the DTX-4300.
USB Comm
Reader/Keypads (2)
Software
Example shown:
DTX-4302xUSB
Features
• Integrated door control, proximity
reader and keypad
• 2000 users
• Weather resistant design
• HID 26 - 40 bit format card
compatibility
• Communication via - SEG-1
(LAN/WAN) or USB to 485
converter
• Weigand compatible
• Remote proximity reader mounting
and glass mount option
• 32 doors per site (when managed
with Hub Manager Professional)
• HID Corporate 1000 compatible
• 3 year warranty
• Bi-color LED to indicate operation
• Fits over a single gang electrical
box
• UL 294 Listed
• 2000 event audit trail
Technical Information
• Dimensions: 2.75” W x 5.25” H x
1.38” D
• Operating voltage: 12 VDC only
• Temperature tolerance: -31F to
150F
• Auxiliary Relay: Form C 1 amp
SPDT
• Main relay: Form C 2 amp SPDT
• Request to Exit Input
Riser Diagram
RS485
To PC
Hub
Manager
RS485
Power
for strike
12 or 24
VAC / VDC
110 VAC
T
T 12 VDC
Power
for strike
12 or 24
VAC / VDC
110 VAC
T
T 12 VDC
DTX-4300
DTX-4300
Strike
Strike
12 or 24
VAC / VDC
12 or 24
VAC / VDC
The Access Control System located at the door, acts as the reader and the controller.
The wire connections are made at each door.
Dimensions
Listings and Approvals
3 Year Limited Manufacturers
Warranty
DTX-4300 Series
<
^
2.75”
< > 1.38”
>
U.L. 294 Listed
^
5.25”
Detex Limited Warranty
5.25”
^
^
Front View
Side View
How to Order
Interface Connection
N
= Network
USB = USB Serial
DTX-4 3 0 2
Example Order
Number
x
USB
SYSTEM
1 = 1 Door System
2 = 2 Door System
3 = 3 Door System
4 = 4 Door System
(Specify - Up to 16 door systems)
October 23, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Tailgate Detection System
AT-5200 Series
The Detex AT-5200 Series Tailgate Detection System assures that only one individual enters a secured
doorway for each authorized card read; compatible with most card reader technologies the AT-5200 is
easy to retrofit. This unique and cost effective optical security system, which uses unique algorithms
and infrared sensor beams to detect tailgating, is perfectly suited for areas requiring tighter security.
The potential applications for the AT-5200 are unlimited, however typical applications include employee
entrances, computer rooms, bank vaults, dorm entrances, and areas with restricted access. Its subtle
design does not distract from interior aesthetics and it mounts easily on standard door frames.
Benefits
• Adds additional security to a
restricted area where
unauthorized entry must be
controlled
• Compatible with most access
control systems and easily
retrofits, providing enhanced
security
• Integrated door prop alarm for
additional security
• High throughput easy entry or
exit for authorized personnel
• Encourages employees, students,
visitors, etc. to maintain access
control procedures
• ADA compliant
• Blends in with architectural styling
Features
• Local control/annunciator;
unauthorized access/egress is
annunciated locally and with the
access control system
• Key switch for local alarm shunt/
override
• Alarm can be reset through an
on-board timer
• Mounts on standard width door
frame or wall
• Spacer mounting kit standard, can
be used as a raceway for wiring
• Field configurable for card in/card
out or card in/free exit operation
• Alarm can be reset by a remote
contact
• Adjustable access period
• Remote annunciator plates, fit in a
single gang box
• Status indicator lights (Wait or
Proceed)
• Alarm status relays for remote
annunciation
• Tamper Switch
Mechanical Options
• Spacer Mounting Kit (order
separately)
• 1 gang Remote Annunciator Plate
(included with AT-5200-R1)
Electrical Options
• MS-1039 Magnetic Door Contacts
(optional)
• 80-800 Power Supply (12VDC
option)
• Mullion Mount Remote Annunciator plate (specify AT-5200-R2)
Technical Information
• 12 VDC @ 500mA
• Direct mounting to doorframe or
wall by using optional spacer
mounting kit
• Alarm Sound Level - 70dB @
10 inches
Listings and Approvals
Detex Limited Warranty
Finishes
• Dark Bronze with IR Plexiglas
cover
Dimensions
2.6"
Meets ADA
Requirements
2.0"
3 Year Limited Manufacturers
Warranty
SECURE
ACCESS
54.7"
October 23, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
KEYSWITCHES
CS-400 Series
The CS-400 series Keyswitches are designed as control devices for use with Access Control Systems,
Delayed Egress, Electric Dogging and Exit Alarms. Other products that require remote input may also
use one of these switches. The 430 and 450 models use momentary switches; the 440 and 460 models
use maintained switches.
CS-432, CS-442, CS-452
and CS-462
(2 LEDs - red and green)
Shown with Cylinder
(Cylinder sold seperately)
Benefits
• Available in eight different
configurations to meet many
different requirements
Features
• Accepts any standard 5, 6 or 7 pin
mortise cylinder with Yale cam
• Maintained, momentary switches
available
Technical Information
• Momentary Switch - Form C
contacts, 5 amp rating (Switch
activated when pushed,
deactivated when released)
November 1, 2012
CS-430, CS-440, CS-450
and CS-460
(No LED)
Shown with Cylinder
(Cylinder sold seperately)
• Easily fits standard switch outlet
box, 1 7/8” deep minimum
• Heavy duty, extruded stainless
steel faceplate
• LED's (green and red) allow 12 or
24 VDC input
• 2-position switch bracket allows
for clockwise and counterclockwise rotation of cylinder
• Maintained Switch - Form C
contacts, 5 amp rating (Switch
activated when pushed,
deactivated when pushed again)
• 2.75" wide x 4.5" high x 1.75" deep
• When used with a 7 pin cylinder,
use collar, Detex p/n 103003
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
ELECTRIC STRIKES
DS-1481 & DS-1581
Rim Strikes
A series of electric strikes for use exclusively on rim panic hardware, these quality products were designed for easy installation and years of trouble-free security. The DS-1581, with its infrared monitoring
capabilities, can send a signal to a remote station, trigger video surveillance, and monitor a local alarm.
DS-1481
DS-1581
Benefits (DS-1481) -
Benefits (DS-1581) -
• Easy surface mounting saves time and money
• Similar to DS-1481 with an added non-contact
monitor for latch bolt
• Stainless steel construction provides years of
reliable service
• Easy surface mounting saves time and money
• Field-selectable fail secure/fail safe design
provides customer selection of security features
• Adaptable wiring schematics allow application
choices
• Quiet operation
• Non-mechanical operation extends life and
decreases maintenance
Features (DS-1481) -
Features (DS-1581) -
• One-piece locking mechanism provides
incredible strength, durability and reliability
• All the features of the DS-1481 plus the sensor
is concealed with the unit
• 3,000 plus pounds of holding force
• Sensor requires no adjustment
• Unique four-pin anchoring system provides
support beyond standard two tapped mounting
holes
• Detects radiant infrared reflections of the latch
and ignores ambient light
• Non-handed
• Accommodates up to 3/4" Pullman latch
• BHMA Grade 1
Technical Information (DS-1481) -
Technical Information (DS-1581) -
• 12/24 VDC
• 12/24 VDC
• Built-in surge and kickback protection
• Built-in surge and kickback protection
• Life-cycle tested to 1.5 million plus
• Life-cycle tested to 1.5 million plus
Dimensions -
• SHARP® Infrared optical sensor
• Normally Open and Normally Closed contact
terminals
• Single pole, double throw, Form "C" relay,
1Amp @ 24VAC or 24VDC
• Sensor Power - 12 through 30VDC only
Detex Limited Warranty 1 Year Limited Manufacturers
Warranty
January 6, 2009
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
MULTI-ZONE ANNUNCIATORS
RP-600 SERIES
The RP-600 multi-zone annunciators are innovative door management products that provide an
efficient means of displaying the condition of security devices throughout a monitored facility. An
RP-600 multi-zone annunciator serves to provide visual and audible indication of alarms as they
occur, giving security personnel the ability to monitor a large complex from a single location.
8 Zone Annunciator
12 Zone Annunciator
Benefits
• State-of-the-art monitoring in
compact package
• Electronics organized into modules
for wide range capabilities
• Provides visual and audible
indications allowing monitoring
of a large complex from a single
location
Features
• Available 8-zone (RP-621) or
12-zone (RP-631)
• Zone shunt allows user to by-pass
any selected zone
• Latch control assures point of
alarm is reset
• Offers standard or optional
controls
• Bi-colored LEDs easily identify
status
• Pushbutton reset
• 12VDC
• Utilizes standard 2 or 4 gang deep
electrical mounting boxes - not
provided
Dimensions
Detex Limited Warranty
• RP-621 - 8 Zone
4.6"W x 4.6"H x 2.5"D
3 Year Limited Manufacturer's
Warranty
• RP-631 - 12 Zone
6.4"W x 4.6"H x 2.5"D
October 24, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
MAGNETIC LOCKS
ML-1548
1500+ lb. Electromagnetic Lock
The Detex ML-1500 Series, Grade 1 Magnetic Lock meets or exceeds 1500 lbs. of holding force to
the separation point. This is powerful enough to hold many doors against a force that will deform or
destroy the door before the ML-1500 can be forced open. Positive, instantaneous failsafe operation is
guaranteed, with no moving parts to bind or wear, the ML-1500 Series will release immediately when
de-energized by Fire Life Safety System or remote controls.
Available in 628 Aluminum Finish
or
711 Black Finish
Benefits
• Easy mounting, time saving
installation
• Physical installation of lock may
be made before or after wiring is
run
• Secure 1500+ lbs of holding force
deters forced entry
• Matches any application or décor
• Maintenance free operation with
no moving parts
Features
• Peel-n-stick paper template
• Non-handed
• Built-in spike protection
• Interlocking slide mounting plate
makes installation easy
• All steel magnetic core
construction
• Plated and anodized surfaces
• 12 / 24 VDC voltage sensing input
• Electronics module provides
numbered terminal block
connections, eliminating wire nuts
Mechanical Options
• ML-1548 - Aluminum 628 finish
• ML-1558 - Black 711 finish
Electrical Options
• RT - Relock Timer - 0-110 seconds
Accessories
• Brackets
Technical Information
• All steel magnetic core
construction
• Housing is heavy aluminum
• .280mA @ 24VDC, .280mA @
12VDC
Finishes
• 628 - Aluminum
• 313 - Dark Bronze
Dimensions
Mounting Diagram
anti-tamper
screw
Listings and Approvals
UL Listed
• Magnetic Lock 10.5" L x 2.875" H x 1.625" D
cavity screw
• Armature 7.4375" L x 2.375" H x .625" D
Detex Limited Warranty
3 Year Limited Manufacturers
Warranty
LISTED
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified
A156.23 - 1992
Meets NFPA 80 & 101
for Life Safety
California State Fire Marshall 3774-0324:100
City of New York
MEA 61-95-E
October 24, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
MAGNETIC LOCKS
ML-1549W
1200+ lb. Weatherized Electromagnetic Lock
The Detex ML-1549W Weatherized Series, Grade 1 Magnetic Locks provide approximately 1200 lbs.
of holding force to the separation point. Positive, instantaneous failsafe operation is guaranteed, with
no moving parts to bind or wear, the ML-1549W Series will release immediately when de-energized by
Fire Life Safety System or remote controls.
Benefits
• Easy mounting, time saving
installation
• Wiring may be run before or after
installation of lock
• Weatherized for use in the
harshest conditions
• 1200 lbs of holding force deters
unauthorized entry
Features
• Stainless Steel Case
• Epoxy filled for weather resistance
• Non-handed
• Threaded couduit fitting
• Built-in bond sensor
• Failsafe operation unlocks in a
power outage
Electrical Options
• Dual 12/24 VDC field selectable
voltage
Accessories
• Various brackets (call factory)
• Floating armature design
compensates for gate/
door misalignment with the
electromagnet
• Maintenance free operation with
no moving parts
Technical Information
• All steel magnetic core
construction
• .225mA @ 24VDC, .450mA @
12VDC
Finishes (Advantex)
• 630 - Stainless Steel
Mounting Diagram
For 1/2” (12.7)
or 3/4” (19.05)
Bond
Sensor
Coil
Dimensions
#1/4-20 x 2”
For 1/2” (12.7)
or 3/4” (19.05)
Coil
• Magnetic Lock 1.61” D x 2.5” W x 8.66” L
Bond
Sensor
#1/4-20 x 1 1/2”
• Armature .63” D x 2.40” W x 7.283” L
Detex Limited Warranty
1 Year Limited Manufacturers
Warranty
TOP MOUNT MODEL
FACE MOUNT MODEL
12VDC and 24VDC Configurations
* ACCESS CONTROL(S)
(+)<
>
To Properly
Fused DC Power
source
(-)<
* ACCESS CONTROL(S)
(+)<
>
To Properly
Fused DC Power
source
(-)<
(+)
BRN
PUR
BLU
YEL
(-)
12VDC CONFIGURATION
ML1549W
12VDC@.48A
(+) 24VDC CONFIGURATION
BRN
BLU
ML1549W
PUR
24VDC@.24A
YEL
(-)
Listings and Approvals
UL Listed
LISTED
October 24, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
MOTION DETECTORS
MN01 & MN02
Passive Infrared Sensors
The MN01 & MN02 provide reliable motion detection for passive "Request-to-Exit" installation. Superior
white-light and RFI immunity and SMD circuitry provide outstanding performance and sensitivity.
MN02
MN01
Benefits
• Hands-free activation
• Reliable detection
Features
• Both offer special circuitry for
superior RFI immunity
• Dual-Pyroelectric detection
elements
Electrical Options
• MN01 requires 12 to 24VDC or
AC
• Choice of fail safe/fail secure
operation
• Single or double door coverage
• Easy to install
• MN01 allows fail safe/fail secure
selection
• MN02 provides fail safe default
• MN02 requires 10.5 to 16 VDC
• Both offer single or double door
coverage
Detection Area - MN01
Detection Area - MN02
28.0
12.0 Meters
8.5
25.0
7.5
0
Wall or Frame Mount
Double door
Adjustable
1.5m
Single Door
Mounting
height
2.5m
8’
5’
35°
0.5m
2.4m
8’
angle 20°
1.5m
5’
20°
0.5m
2.4m
8’
SIDE
Dimensions - MN01
7.5
9.0
10.5
20.0
6.0
4.5
—
2
10.0
3.0
0.8m
1.5
2 2/3’
—
5.0
3
0
4m
Single Door
Mounting
height
2.5m
8’
6.0
1
Ceiling Mount
Double door
4.5
—
FRONT
Adjustable
3.0
15.0
1.2m
4’
SIDE
height
1.5
height
—
1
0.8m
—
2
2 2/3’
—
3
1.2m
4’
FRONT
1.5
10.0
3.0
15.0
4.5
20.0
6.0
25.0
7.5
28.0
FT 0
8.5
0
5.0
0.75 1.5
5.0
10.0
15.0
20.0
25.0
30.0
35.0
8.5
40.0
3.0
4.5
6.0
7.5
9.0
10.5
12.0 Meters
10.0
15.0
20.0
25.0
30.0
35.0
40.0
2.6
4m
0
FT 2.5
0
5.0
Dimensions - MN02
4.0”
2.5”
Depth = 1.7”
Listings and Approvals
Detex Limited Warranty
1 Year Limited Manufacturer's
Warranty
October 24, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
MAGNETIC SWITCH
MS-2049F, MS-2049S, MS-2049SC, MS-2049SI
These magnetic switches are designed primarily to serve as sensing devices to detect the opening of a
door or window; to assure that a protected door is securely under surveillance; to serve as a trigger for
a wall-mounted Detex Exit Alarm; to signal that a door has been inadvertently left open; and to be used
as a direct switch to set off many kinds of audio and visual alarms.
MS-2049F Flush
Magnetic Switch
MS-2049S Surface Mounted
Magnetic Switch
Benefits
• Provides assurance that protected
doors are under surveillance
MS-2049SC Surface Mounted
Magnetic Switch
with conduit connector for use
with thin-wall conduit
MS-2049SI Surface Mounted
Magnetic Switch
for In-Swinging Doors
• Serves as a trigger for alarms or
remote monitors
• UL listed for use on fire rated
doors and assemblies
• Easy installation with concealed
wiring and color coded leads
• Wide range of alarm and signal
applications
• Surface mounted units are housed
in a durable high impact ABS
thermoplastic, a UL listed material
used in the manufacture of
telephones, auto bodies, etc.
• Minimizes false signals due to
loosely closed doors
• Maximum contact ratings 24VDC @ .5A
• Overhead (preferred) or latch-stile
mounting available for all models
• For use on steel, aluminum or
wood doors and frames
• Switch - single pole, double throw
(SPDT)
• The flush device (MS-2049F)
should have the switch contact
housed in the door frame and the
magnet mortised in the edge of
the door
Features
• Tamper protection - mounting
screws inaccessible when door
closed
• Components potted to protect
against shock and moisture
• Switch rated for over one million
operations under load
Technical Information
• May be mounted on stiles as
narrow as 1-3/8"
• Wiring leads, 12" long, color
coded, concealed
Dimensions (MS-2049F)
<
>
4 7/8”
<
<
Switch unit in jamb
or header
<
6”
^
<
Magnet unit in
edge of door
Latch edge
mounting
<
<
CL
3 5/16”
4 1/8”
^
1½” min.
1” min.
>
^
6”
Plaster Guard
^
Overhead mounting (preferred)
<
1 ¼”
CL
>
^
^
Riser Diagram
¼ max.
<
>
>
15”
16
Overhead Installation, Side View
Overhead Installation, Front View
Dimensions (MS-2049S)
DOOR
DOOR FRAME
¼” Max.
¼” Max.
^
^
Listings and Approvals
^
LISTED
“UL Listed Miscellaneous
Fire Door Accessories”
“UL Listed Door Position
Switch”
^
<
5 3/16”
>
<
1 17/32”
>
Side View
Front View
Detex Limited Warranty
3 Year Limited Manufacturers
Warranty
October 23, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
MAGNETIC SWITCH
MS-1039F, MS-1039S, MS-1059F, MS-1059S
These magnetic switches are designed primarily to serve as sensing devices to detect the opening of a
door or window; to assure that a protected door is securely under surveillance; to serve as a trigger for
a wall-mounted Detex Exit Alarm; to signal that a door has been inadvertently left open; and to be used
as a direct switch to set off many kinds of audio and visual alarms.
MS-1039F (White) / MS-1059F (Brown)
Flush Magnetic Switch
(MS-1059F Shown)
MS-1039S (White) / MS-1059S (Brown)
Surface Mounted
Magnetic Switch
(MS-1059S Shown)
Benefits
• Anti-Tamper Design
• Serves as a trigger for alarms or
remote monitors
Features
• Polarity selection is non-critical
• Provides assurance that protected
doors are under surveillance
• BMS - Balanced Magnetic Switch
provides improved security
• Simple Installation
• Flush switches are self-locking
• Color selection white/brown
• Durable Magnet
• Wide range of alarm and signal
applications
• Surface switches have Max.
Contact rating 30VDC @ 250mA
• Overhead (preferred) or latch-stile
mounting available for all models
• Flush switches have Max.
Contact rating 28VDC, 0.5A, 10W
• Switch - single pole, single throw
(SPST)
• The MS-1039F (Flush mount)
should have the switch contact
housed in the door frame and the
magnet mortised in the edge of
the door
• For use on steel, aluminum or
wood doors and frames
• Normally closed contact
• Flush switches are solid, onepiece design with no need for
extra donut adapters
Technical Information
Finishes
• MS-1039F/S - White
• MS-1059F/S - Brown
Riser Diagram
Dimensions (MS-1039F/MS-1059F)
Overhead mounting (preferred)
<
<
6”
<
6”
<
Latch edge
mounting
Dimensions (MS-1039S/MS1059S)
Detex Limited Warranty
3 Years Limited Manufacturers
Warranty
November 1, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
PUSHBUTTON CONTROLS
PB-2000 / 2100 Series
Simple to install and easy to use, the PB-2000 series of push button controls allow for lock or magnetic
lock release in access control and request to exit applications.
PB-2048
Benefits
• Fast and easy installation
PB-2158
PB-2138
• Aesthetically pleasing design fits
any décor
Features
• Fits single switch box - flush or
surface - approximately 2"
Mechanical Options
• Mushroom button (Std.)
• Fits standard 2" switch box (Std.)
• Shrouded button
• Key switch cover
Electrical Options
• Available in Normally Open,
Normally Closed or Form C
• Available in Momentary or
Maintained configurations
• Narrow/Mullion Plate
Technical Information
• 12-24 VAC @ 100 mA
• Switch - UL File #E66677
Finishes
• Painted Aluminum
• Stainless Steel
• Switch - CSA Certified
Riser Diagram
Detex Limited Warranty
1 Year Limited Manufacturers
Warranty
From 120VAC source
J
Detex Logic Controller
and Power Supply
Detex Motion Sensor
(opposite side of door)
J
Detex Maglock
Inside
Inside
J
Detex Push Buttons
Model PB2100
October 24, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
MISCELLANEOUS
Power Transfers
Exposed or concealed, power transfers are used to protect wires that electrify door hardware. Either
transmitting power to a low voltage electric latch retraction exit device or signaling a remote camera, wire
transfers are essential to electrified door hardware.
PT-5 - Power Transfer loops provide a means of running wires
from the frame to doors equipped with electric locks and exit
devices. The PT-5 is a heavy-duty power transfer device,
concealed mortise mount, UL listed miscellaneous fire door
accessory. It is UL 10C positive pressure compliant and
UBC 7-2 Fire Test for Door Assemblies compliant.
Dimensions: 10-1/4” L x 1” W x 3/4” D
EWH8-626 - This five-knuckle energy transfer hinge is ideal for
door that require concealed low voltage transfer of power from
the hinge jamb to the door. With a total of eight (8) wires, there
are two (2) 20AWG for power, two (2) 22AWG for by-pass
inputs and four (4) 28AWG for signaling, the center hole wire
access location makes for easy installation
Hinge Size: 4.5” x 4.5”
FCA - Flex conduit and End Cap gives you 3 feet of flexible
conduit, 10 wires with couplers with pin receptacle connectors
and the Advantex standard end-cap with fittings.
AL18 - Surface Mount Armor Loops - 18 inch long flexible conduit with
two (2) stainless steel ends with two (2) couplers.
JB1 - Junction Box - Flex Conduit
Kit for use with EM Delayed Egress
device. Contains 9-1/2 feet of
flex conduit, wire connectors and
clamps required for installation.
Box Dimensions:
4 5/8” W x 4 5/8” L x 2” D
October 24, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AUXILIARY PRODUCTS
Weatherized Horn/Strobe
For added security in your facility, Detex offers a line of additional horns, strobes and horn/strobe
combinations. When the environment is noisy, or when you need exterior sounders, these weatherized
products will draw your attention to possible breaches in your security.
HR2
Horn Only
Benefits
• Plug-in design speeds installation
Features
• Plastic weatherproof back box
HSR2
Horn / Strobe
• Ample room in backbox prevents
nicked/crushed wires
• Mounting plate shorting spring
tests wiring before installation
• Knock-outs eliminate need for
drilling
• Outdoor horns, strobes and
horn/strobes listed to NEMA 4X
• Resistant to saltwater corrosion
Electrical Options
• HR2 - Horn only, 2-wire,
12/24VDC
• SR2 - Strobe only, 2 wire,
12/24VDC
• HSR2 - Horn/Strobe, 2 wire,
12/24VDC
• HSR4 - Horn/Strobe, 4 wire,
12/24VDC
Technical Information
• Standard operating temperature 32 to 120F (-40 to 66C)
• Strobe flash rate - 1 per second
• Input terminal wire gauge - 12 to
18 AWG
Riser Diagram
Dimensions
Delayed Egress
4.7˝
2.5˝
5.6˝
Wall-mount horn/strobes
2.0˝
5.7˝
5.1˝
Wall weatherproof back box
Listings and Approvals
NOTE: All items above sold separately or in EasyKit DEx10EXx1S-1
October 24, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
8485-
Rearm / Reset
Options
$50 RKO = Rearm using key only
“ “ = Rearm using key or access control *
“ “*
$5 KS = Key stop
$30 SSK = Security screws for RIU
$35 KS x SSK = Key stop and Security screws for RIU
“ “ = Dummy Plug included / not installed *
$60 MC-65 = Mortise cylinder installed
$60 IC7 = Interchangeable core housing installed
“ “ = Surface Mounting *
F = Flush Mounting
“ “ = Gray Remote Indicating Unit *
Blk = Black Remote Indicating Unit
“ “ = Door Signal Module on 85-800 *
$136 M12 = 12VDC Module.
“ “ 3 Chirps Arming *
SA – Silent Arming (no upcharge)
“ “ = English *
RFC = French/Canadian
RWS = Spanish
RWC = Chinese
Signage
ECL-395-1 included in p/s
ECL-395 included with rim
X Misc. X
How To Order
Signage
Arming
Output
RUI
8 0 0 X Language X Options X Options X Color X Mounting X Cylinder
0 = 15 second delayed egress *
3 = 30 second delayed egress
0 = 15 second Arming *
1 = 1 second Arming
2 = xx second Arming
84 = Single EExER*
85 = Pair of EExER*
Note: * indicates default
X
LN = Less Nuisance
X Nuisance
Alt Build
Date: July 2, 2012
EE = Powers (1) EExER
and (1) EE exit device $98
ER = Powers (1) EExER
and (1) ER exit device $98
“ “ * = Powers 2
EExER exit devices
SERIES 800
10-800 / 11-800
Controller
The Detex 10-800 and 11-800 are universal logic and power supply controllers that allow for total control
over all electrified hardware. The controller receives input from a switch, access control or any dry
contact device and processes it into the desired output. One controller can manage applications for
up to two doors, such as standard egress, delayed egress and interlocks. All connections for local or
remote signaling are contained in one box. The 10-800 and 11-800 logic controllers provide at least 2A
of DC power at the door. A battery backup/charging circuit is standard with each controller to deliver an
uninterrupted source of power for up to 4 hours (battery sold separately).
10-800
Shown open
10-800
or
11-800
Shown closed
NOTE: 10-800 and 11-800 available in Black
11-800 same as 10-800 but with added 24 point terminal strip and flip-down tray
Benefits
• Central terminal connections
provide easy wiring
11-800
Shown open
• Designed specifically to support
electric locks, access control
systems and delayed egress
systems
• Multiple fire alarm relay input
options assure compliance to
various life safety codes
Features
• Power supply and controller all in
one box
• Status LED's toggle on or off for
easy troubleshooting
• Other Models include:
• Controls up to 2 separate doors
for standard egress or 2-door
interlock applications
• Connections are labeled with either
numbering scheme or label with
text to identify circuits
• 1 controller required for each
independent delayed egress
application
• Single AC line voltage required to
activate
• Output relays for locks, local
alarm and remote alarms
• 9VDC, 100mA output terminal tap
• Inline fuse protects against power
surges
• Relays may be configured to wet
or dry connections
• Dual voltage selection (12/24VDC)
• Fuse protection
• Battery backup circuit - standard
• On/Off switch allows for easy
service and inspection
30-800* - Surface box - Zinc
plated, lid and Series 800
controller
31-800* - Flat mount plate and
Series 800 controller
40-800* - Same as 11-800 without
transformer
41-800* - Same as 10-800 without
transformer
50-800* - Series 800 controller
only, no box
* Requires low voltage source
Mechanical Options
• Cover lock key
• Battery box extension
• 24 point terminal strip and flip
down tray included with the 11-800
Electrical Options
• Access Control compatible
• Tamper Switch
Technical Information
• Battery backup, 12VDC or 24VDC,
4AH
• Pre-wired terminal strip with labels
for easy identification (11-800)
• 110VAC input
• Remote Relay 2A
• 12 or 24 VDC output, 2A
• Controls 2 doors within 100 feet
using 18ga stranded wires
• Lock Relay 2A
• M12 module provides 12VDC @
400mA for access control
components
• Bolt Position /Door Position
Switches Relay 2A
• Local Alarm Relay 5A
Dimensions (10-800/11-800)
Riser Diagram
From Fire Alarm
From 120VAC source
J
Detex Logic Controller
and Power Supply
(10-800 / 11-800)
Remote Alarm
(sold separately)
Detex
door sign
for
Delayed Egress
(not included)
9 1/4”
12 1/4”
4 1/16”
Outside Inside
Detex Keypad
or Card Readers
(sold separately)
J
J-box
(not included)
Advantex EI
(shown)
Detex flexible conduit
with connections
(optional)
Typical Application Delayed Egress with Access Control
Listings and Approvals
UL Listed
Power Supply
and Special
Locking
Arrangement
(Delayed Egress)
October 24, 2012
Detex Limited Warranty
3 Year Limited Manufacturer's
Warranty
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
SERIES 800
80-800 / 90-800
Power Supply
The Detex 80-800 or 90-800 Power Supply is designed for applications requiring a continuous supply of
a regulated, filtered output voltage. The Detex 80-800 Power Supply includes a battery charging circuit.
Batteries provide backup for uninterrupted service.
80-800
Benefits
• Simplifies installations that do not
require a conduit, Class 2 outputs
standard and may be wired
directly to 115VAC input
90-800
• Provides continuous regulated and
filtered 12VDC or 24VDC
(80-800); 24VDC (90-800)
• Designed specifically to support
electric locks and access control
systems
• Provides individual fused
protection, field reset
• On/Off switch allows for easy
service and inspection
Features
• Fire alarm input provides release
of fail-safe locks in case of
emergency (80-800/90-800)
• Field selectable outputs
(80-800 only)
• Auto-resetting circuit protection
(80-800/90-800)
• Battery charging circuit, PTC
protection (80-800 only)
• Heavy gauge enclosure, 18ga
(80-800/90-800)
• LED system status indicator
(80-800/90-800)
• Class 2 outputs (80-800/90-800)
• Low battery disconnect when
batteries are below 70% capacity
(80-800 only)
• 80-800 (1) Output: 12 or 24VDC,
1A
• Battery Charger: 13.5/27VDC,
500mA (80-800 only)
Accessories
• Batteries (80-800 only)
Technical Information
• Input: 115VAC, 50/60 Hz
• Class 2 Rated
• 90-800 (2) Outputs: 24VDC, 1A
Finishes
• Painted Beige - 80-800
• Painted Black - 90-800
Riser Diagram
Dimensions (80-800)
12.25”
Outside
3.5”
12.25”
Dimensions (90-800)
Listings and Approvals
UL Listed
Detex Limited Warranty
3 Year Limited Manufacturer's
Warranty
October 24, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
SERIES 800
81-800 / 82-800 / 83-800
Logic / Power Supply - Latch Retraction
Detex Series 800 logic and power supplies convert 120VAC into regulated and filtered 24VDC,
providing a secure, consistent, power feed to various electrified door hardware accessories, primarily
access control components, such as Detex latch retraction exit devices.
81-800 / 82-800
83-800
Benefits
• Filtered and regulated 24VDC
power protects circuitry from stray
power surges and spikes
Features
• 81-800 - 1 AMP continuous,
controlling 1 Detex latch retraction
(ER) device for 1 door
• 82-800 - 2 AMP continuous,
controlling 2 Detex latch retraction
(ER) devices for a pair of doors
Mechanical Options
• L - cover lock (cam style) & 2 keys
Electrical Options
• M12 - 12 volt module provides
12VDC power
Accessories
• 70-24B - 24VDC 4 AMP hour
battery pack
• While others require 2 amp power
supplies for single door
applications, Detex allows you to
specify and supply the economical
81-800 for single door latch
retraction applications
• The Series 800 products have
been engineered to provide
superior operation through design
integration with all Detex electric
latch retraction options
• 83-800 - 2 AMP continuous,
controlling 2 Detex latch retraction
(ER) devices for 2 independent
doors
• Design provides enough power to
cycle Detex latch retraction motor,
one time, even if power is lost
while attempting to open the door
and gain access
• Battery charging circuit included
standard (batteries sold separately)
- see accessories
• 81-800, 82-800 and 83-800 have
standard output used to signal
automatic door operators
Technical Information
• 12.25" high x 12.25" wide x 3.5"
deep
• 18 gauge steel
• Machine and Sheet Metal Screws
(Std.)
• Beige with hinged cover
• Knockout holes provided for
conduit connection
Riser Diagram
Dimensions (81-800 and 82-800)
Controller and
Power Supply
(81-800 Shown sold separately)
EX - Request to
Exit Switch
Output
(optional)
115VAC
input
Dry Contact
Input
ER ELECTRIC
LATCH RETRACTION
(sold separately)
Detex Limited Warranty
Dimensions (83-800)
16”
3 Year Limited Manufacturers
Warranty
14”
6.5”
Listings and Approvals
U.L. Listed
Meets NFPA 80 & 101
for Life Safety,
CA Title 19
ANSI/BHMA
requirements for all
Building Codes
October 24, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
SERIES 800
84-800 / 85-800
Logic / Power Supply - Latch Retraction
Detex 84-800 and 85-800 are universal logic and power supply controllers that convert 120VAC into
regulated and filtered 24VDC, providing a secure, consistent, power feed to the Detex electric latch
retraction delayed egress exit devices.
84-800
Benefits
• Power supply and controller all in
one box
• All connections centralized
• Single AC line voltage required
to activate
Features
• 84-800 - 1A continuous,
controls 1 Detex electric latch
retraction, delayed egress
(EExER) device for 1 door
• 85-800 - 2A continuous,
controls 2 Detex electric latch
retraction, delayed egress
(EExER) devices for a pair of
doors
• Fuse protected
Mechanical Options
• Cover lock key
Electrical Options
• 12VDC @ 300mA module in
addition to 24VDC power
85-800
• Allows you to specify and supply
the economical 84-800 for single
door or 85-800 for 2-door latch
retraction, delayed egress
applications
• The Series 84-800 and 85-800
products have been engineered to
provide superior operation through
design integration with electric
latch retraction, delayed egress
options
• Filtered and regulated 24VDC
power protects circuitry from stray
power surges and spikes
• Cable harnesses engineered to
take guesswork out of making
correct point to point connections
• Fire alarm input for life safety
compliance
• Cable harness lengths allow
84/85-800 enclosures to be
located up to 15' from device
• Connections are labeled to
identify circuits
• Status LEDs toggle on or off for
easy troubleshooting
• Output relay for local and remote
alarm
Technical Information
• 12.25" high x 12.25" wide x 3.5"
deep (84-800)
• 14" high x 16" wide x 6.5" deep
(85-800)
• 110VAC input
• 18 gauge steel
• 24VDC output, 1A (84-800) or
2A (85-800)
• Knockout holes provided for
conduit connection
• Machine and Sheet Metal Screws
(Std.)
Dimensions (84-800)
Riser Diagram
Detex Logic Controller
and Power Supply
(84-800 / 85-800)
• Beige with hinged cover
From 120VAC Source
From Fire Alarm
12.25”
Detex door sign
for Delayed Egress
(sold separately)
Detex supplied
cables
Remote
Interface
Advantex
EExER
(shown)
12.25”
3.5”
Dimensions (85-800)
Detex Limited Warranty
16”
3 Year Limited Manufacturers
Warranty
14”
6.5”
Listings and Approvals
U.L. Listed
Meets NFPA 80 & 101
for Life Safety,
CA Title 19
ANSI/BHMA
requirements for all
Building Codes
October 24, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
®
Series 800 Accessories
Batteries
70-02B - Battery Box Extension; Black; Battery sold
separately
70-12B - 12VDC 4AH - 1 battery provided
70-24B - 24VDC 4AH - 2 batteries provided
ACDx10xE5000
ACDx20/21xE5000
Access Controlled Doors
The ACDxE5000 EasyKit offers industry-proven life safety and security hardware for high-use, highabuse doors with a cost-effective access control solution.
®
®
10 Series
(Shown on 10 Series Rim Exit Device - Available with 20/21 Series Surface Vertical Rod Devices)
Benefits
• Cost-effective access control
with panic hardware in one easyto-install kit
• Optional easy-to-use Excel-based
software
• Tough and durable design for
years of trouble-free service in
high-use, high-abuse environments
• No key or cards to manage
• Pin code can be changed in
seconds
• Audit trail provides additional
security management
• Easy-to-replace standard AA
batteries
Features
• E5000 features cast stainless
steel internal drive parts
• Non-handed
• 1/8 turn dogging
• Field sizeable panic device
• Heavy-duty angled end cap
deflects damage away from
panic device
• Stainless steel deadlocking
Pullman-type latch bolt on exit
device
• E5000 offers up to 100 access
codes
• Weatherproof trim requires no
outside gasket
• Minimal door prep with no throughdoor wiring saves time and money
• Battery pack included
For more information on 10/20/21 exit devices, see individual catalog pages
For more information on E5000 visit www.kaba-ilco.com/access_control
Mechanical Options
• CD - Cylinder Dogging
• 36 - Fits 36" door width (Std.)
• H - Hurricane Rated
• HD - Hex Dogging (Std.)
• 48 - Fits 48" door width
• 99 - surface strike (Std.)
• LD - Less Dogging
• F - 3-Hour Fire Rated (both E5000
and panic device)
• 98 - semi mortise strike
• Delayed Egress - Self Contained
(EE)
• Electric Switching (ES)
• Delayed Egress with Latch
Retraction (EExER)
• Request to Exit Weatherized
(EXxW)
Electrical Options
• Exit Alarm (EA)
• Electric Dogging (ED)
• Electric Integration (EI)
• Electric Latch Retraction (ER)
• Delayed Egress - Mag Lock
(EM)
• Request to Exit (EX/EXV)
Refer to Electrified Options section for
more information
Accessories
• SSK1 - Torx Security Screw Kit
• SN1 - Sex Nut Fasteners
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Stile - Fits minimum 5" wide
stile with 99 strike (Std.)
• Door Thickness - Fits standard
1-3/4" - 2-1/4" (for other door
thicknesses, contact factory)
• Machine and Sheet Metal Screws
(Std.)
Finishes (Kaba)
• 626/26D Satin Chrome
• Rail - Heavy Ribbed Aluminum
Extrusion
• E5000 numeric pushbuttons vandal resistant, 12 button,
metal keys
• E5000 construction is solid cast
housing and solid cast zinc levers
• 695/55 Duranodic
• 605/03 Lifetime Bright Brass
• 605 / US3 - Polished Brass
• 612 / US10 - Brushed Bronze
• 606 / US4 - Brushed Brass
• 613 / US10B - Oil Rubbed Bronze
• 629 / US32 - Polished Stainless
Steel
• 606/04 Lifetime Satin Brass
Finishes (Advantex)
• 611 / US9 - Polished Bronze
• 630 / US32D - Brushed Stainless
Steel
Dimensions
Riser Diagram
1 5⁄ 8 "
(41 mm)
Pull/Exterior
Side of Door
7
E-plex 5000
Exit Trim
8 ⁄ 8"
DETEX 10 Series
Device
(222 mm)
3 ⁄8 "
3
(85
Listings and Approvals
Advantex
UL Listed
Panic Hardware
LISTED
LISTED
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
California State Fire Marshall 4140-0127:105 and
3725-0127:108
October 24, 2012
E5000 - 3 year Manufacturers
Warranty
• ANSI/BHMA A156.2-2001
Grade 1
UBC 97, Standard 7-2 and
State of Florida Approval
FL9052
Listings and Approvals
E5000
• Meets ADA requirements
Meets ADA requirements
}
1 7⁄ 8 "
(47mm)
Detex Limited Warranty
Advantex - 10 Year Mechanical /
3 Year Electrical Manufacturers
Limited Warranty
• 3 Hour UL & ULC fire rating
for “A” labeled doors
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable
Mullion
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
mm)
10 Series Dimensions Shown
10 Series
Only
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
ACDx10xS5000
ACDx20/21xS5000
Access Controlled Doors
The ACDxS5000 EasyKit offers industry-proven life safety and security hardware for high-use, highabuse doors with a cost-effective access control solution.
®
®
10 Series
(Shown on 10 Series Rim Exit Device - Available with 20/21 Series Surface Vertical Rod Devices)
Benefits
• Cost-effective access control
with panic hardware in one easyto-install kit
• One easy-to-order/specify catalog
number for this turnkey solution
• One common pin code for all users
• Pin Code can be changed in
seconds
• Tough and durable design for
years of trouble-free service in
high-use, high-abuse environments
• No batteries to replace
• Minimal door prep saves time
and money
• Non-handed
• 1/8 turn dogging
• Field sizeable panic device
• Heavy-duty angled end cap
deflects damage away from
panic device
• No key or cards to manage
Features
• S5000 features cast stainless
steel internal drive parts
• Stainless steel deadlocking
Pullman-type latch bolt on exit
device
For more information on 10/20/21 exit devices, see individual catalog pages
For more information on S5000 visit www.kaba-ilco.com/access_control
Mechanical Options
• CD - Cylinder Dogging
• 36 - Fits 36" door width (Std.)
• H - Hurricane Rated
• HD - Hex Dogging (Std.)
• 48 - Fits 48" door width
• 99 - surface strike (Std.)
• LD - Less Dogging
• F - 3-Hour Fire Rated (both S5000
and panic device)
• 98 - semi mortise strike
• Delayed Egress - Self Contained
(EE)
• Electric Switching (ES)
• Delayed Egress with Latch
Retraction (EExER)
• Request to Exit Weatherized
(EXxW)
Electrical Options
• Exit Alarm (EA)
• Electric Dogging (ED)
• Electric Integration (EI)
• Electric Latch Retraction (ER)
• Delayed Egress - Mag Lock
(EM)
• Request to Exit (EX/EXV)
Refer to Electrified Options section for
more information
Accessories
• SN1 - Sex Nut Fasteners
• SSK1 - Torx Security Screw Kit
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Stile - Fits minimum 5" wide
stile with 99 strike (Std.)
• Door Thickness - Fits standard
1-3/4" - 2-1/4" (for other door
thicknesses, contact factory)
• Machine and Sheet Metal Screws
(Std.)
Finishes (KABA)
• 626/26D Satin Chrome
• Rail is Heavy Ribbed Aluminum
Extrusion
• S5000 numeric pushbuttons
- vandal resistant, anodized
aluminum
• S5000 construction is solid cast
housing and solid cast zinc levers
• 695/55 Duranodic
• 605/03 Lifetime Bright Brass
• 605 / US3 - Polished Brass
• 612 / US10 - Brushed Bronze
• 606 / US4 - Brushed Brass
• 613 / US10B - Oil Rubbed Bronze
• 629 / US32 - Polished Stainless
Steel
• 606/04 Lifetime Satin Brass
Finishes (Advantex)
• 611 / US9 - Polished Bronze
Riser Diagram
• 630 / US32D - Brushed Stainless
Steel
Dimensions
1 5 ⁄8 "
(41 mm)
8 7⁄8 "
18”
32 1/2”
(224 mm)
10 Series Dimensions Shown
Detex Limited Warranty
3 3⁄ 8 "
(85 mm)
Front Exterior
Listings and Approvals
Advantex
UL Listed
Panic Hardware
LISTED
LISTED
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
October 24, 2012
S5000 - 3 year Manufacturers
Warranty
• ANSI/BHMA A156.2-2001
Grade 1
UBC 97, Standard 7-2 and
California State Fire Marshall 4140-0127:105 and
3725-0127:108
Listings and Approvals
S5000
• Meets ADA requirements
Meets ADA requirements
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
(85 mm)
Side Exterior
Advantex - 10 Year Mechanical /
3 Year Electrical Manufacturers
Limited Warranty
• 3 Hour UL & ULC fire rating
for “A” labeled doors
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable
Mullion
State of Florida Approval
FL9052
3 3 ⁄8 "
}
10 Series
Only
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
ACDx10ER ACDx40ER
Access Controlled Doors with Latch Retraction
The ACDx10ER EasyKit offers industry-proven life safety and security hardware for high-use, highabuse doors with innovative, proximity readers and software providing an easy-to-install, access
control solution.
Also Included:
Cards
Outside Trim (Call
Proximity
Reader
Keypad
(Optional)
Factory for Options)
Converter Cable
(1500 Ft. of Module
RS-232 to RS-485
Converter Cable)
Latch Retraction Exit Device
(10 Series Shown)
Power Supply
(81-800 Shown)
Wiring Diagram
Basic Software
(Shown on 10 Series Rim Exit Device - Available with 10/40 Rim, 30 Mortise and 20/21/50/51 Surface Vertical Rod Devices)
Benefits • Innovative, robust proximity
technology allows for heavy
access control applications
• Easy-to-install, heavy-duty hardware provides years of troublefree, heavy access control use
Features • Kit includes, Power supplies,
Controllers, Latch Retraction Exit
Device with trim, 2 proximity
readers, cards and basic software
Mechanical Options -
• Easy-to-manage software tracks
1000's of users and cards
• Easily managed, add or delete
users as needed, when necessary
• EasyKit includes all required hardware, wiring and riser diagrams for
easy to order, easy to install, easy
to use package
• Expandable system allows for up
to 30 total doors
• Stainless steel deadlocking
Pullman-type latch bolt on exit
device
• Each kit is easily configured for
entry read and/or exit read
applications
• Minimal door and frame prep
saves time and money
• Non-handed exit hardware
• Heavy-duty angled end cap
deflects damage away from
panic device
• 36 - Fits 36" door width (Std.)
• F - 3 hour fire rated exit device
• 99 - surface strike (Std.)
• 48 - Fits 48" door width
• H - Hurricane Rated exit device
• 98 - semi mortise strike
• Request to Exit (EX) pushpad
switch for remote signaling upon
exit
• LBM - Latch Bolt Monitor
• EWH8-626 - Electric Hinge
• M12 - Power Supply 12V module
for other low volt accessories
• PT5 - Power Transfer
Electrical Options • FC - Flex Conduit and End Cap
Accessories • SN1 - Sex Nut Fasteners
• Various configurable cylinder trims,
pulls and levers (Call factory for
specific details)
Technical Information • Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Thickness - Fits standard
1-3/4" - 2-1/4" (for other door
thicknesses, contact factory)
• Medium Stile - Wide stile rim and
surface vertical rod fits minimum 5"
stile with 99 strike (Std.)
• Narrow Stile - Narrow stile rim and
surface vertical rod fits minimum 2"
stile with 98 strike (optional)
• Machine and Sheet Metal Screws
(Std.)
• Rail is heavy ribbed aluminum
extrusion
Finishes (Advantex) • 605 / US3 - Polished Brass
• 612 / US10 - Brushed Bronze
• 606 / US4 - Brushed Brass
• 613 / US10B - Oil Rubbed Bronze
• 611 / US9 - Polished Bronze
FROM 277V SOURCE
(IF APPLICABLE)
OPTIONAL
277V/120V, 50VA TRANSFORMER
(IF APPLICABLE)
4 CONDUCTOR
RECOMMEND 22AWG
(MINIMUM**)
2 CONDUCTOR
RECOMMEND 22AWG
(MINIMUM**)
J
J
2 CONDUCTOR
RECOMMEND 22AWG
(MINIMUM**)
OPTIONAL
DETEX EAX2500S
HARDWIRED EXIT
ALARM, INSTALLED
BY ELECTRICAL
CONTRACTOR
32 1/2”
J
* add prefix "H" for Hurricane code
and/or "F" for fire rated
18”
FROM REMOTE SWITCH
2 CONDUCTOR
RECOMMEND 22AWG
(MINIMUM**)
DETEX 81-800 POWER
SUPPLY FOR LATCH
RETRACTION PANIC
INCLUDED
J
6 CONDUCTOR
RECOMMEND 22AWG
(MINIMUM**)
DETEX (*)1003CHxER or
(*)1002CHxER LATCH
RETRACTION PANIC
DEVICE INCLUDED
• 630 / US32D - Brushed Stainless
Steel
Dimensions -
Riser Diagram -
OPTIONAL
DETEX MS2049S
MAGNETIC SWITCH
INSTALLED BY
ELECTRICAL CONTRACTOR
• 629 / US32 - Polished Stainless
Steel
OPTIONAL
DOOR SIGN SUPPLIED
WITH DETEX EAX2500S
OPTIONAL
FLEXIBLE CONDUIT WITH
CONNECTIONS SUPPLIED
WITH DOOR HARDWARE,
INSTALLED BY ELECTRICAL
CONTRACTOR
Listings and Approvals Advantex
** all wire for low voltage
shall be 22AWG stranded
or larger as recommended
by NEC
10 Series Dimensions Shown
Detex Limited Warranty Advantex - 10 Year Mechanical /
3 Year Electrical Manufacturers
Limited Warranty
UL Listed
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable
Mullion
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval
FL9052
California State Fire Marshall 4140-0127:105 and
3725-0127:108
July 27, 2010
Series
} 10
Only
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
ACDxML-1548RT
Access Controlled Doors
The ACDxML-1548RT EasyKit offers industry-proven security hardware for controlled entry or exit
as well as hands free entry or exit. The ACDxML-1548RT is a simple, easy-to-install, access control
solution, which is ideal for selected access lobbies and preferred customer entrances/exits.
Also Included:
Wiring Diagram
(not shown)
Motion Detector
Push Button
Power Supply
Electromagnetic Lock
Benefits
• Easy installation with integrated
components
• Push button unlocks magnetic lock
allowing controlled access
• Motion detector unlocks magnetic
lock allowing controlled access
Features
• Kit includes, Power supplies,
magnetic lock, motion sensor,
push button and point-to-point
drawing
• May be wired to fire alarm for
emergency release compliance
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Magnetic lock is equipped with a
field adjustable timer to control
the amount of time the magnet
remains unlocked once the push
button is activated.
NOTE: When used in a means
of egress, code requires a
minimum of 30 seconds.
• Minimal door and frame prep
saves time and money
Riser Diagram
Detex Limited Warranty
3 Year Limited Manufacturers
Warranty
From 120VAC source
J
To Fire Alarm System
Detex Logic Controller
and Power Supply
Detex
Motion
Sensor
(opposite side of door)
J
Detex Maglock
Inside
Inside
J
Detex Push Buttons
Octoboer 24, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
ACDxEAX-2500Sx1S-X
Access Controlled Doors
The ACDxEAX-2500 EasyKit offers industry-proven security hardware for exit doors. With its 100db
horn and strobe, it is designed for use in environments where loud noises could possibly mask the
sound of the alarm alone, which would sound when an unauthorized use of the exit occurs. The strobe
gives you the visual indication in the event you can not hear the alarm.
Exit Alarm
Magnetic
Switch
Horn/Strobe
Power Supply
ACDxEAX-2500Sx1S-5FXG (shown)
Benefits
• Field selectable features allow
customer to choose status
indicators and auto rearm options
• 100dB piezo horn provides
security for restricted doors
Features
• Surface & Flush mount available
• Easy to install using ordinary tools
• Strobe provides visual indication
when door is violated
• 90-800 power supply provides
power for entire system
• Point to Point Wiring Diagram
• Low battery alert is field selectable
• Horn/Strobe has plastic,
weatherproof back box
• Tamper resistant housing and
cover protects electronics from
manipulation
Mechanical Options
• KS - Key Stop (Key removed only
when armed)
• Additional magnetic switch for
double door applications
• EAX-2500 Flush or Surface
Electrical Options
• Configuration allows the EasyKit
to match your field voltage (277V,
120V)
• Alarm status indicator is field
selectable
Accessories
Detex Limited Warranty
• MC65 - Mortise cylinder installed
at factory
• IC7 - Interchangeable housing
installed at factory
3 Year Manufacturers Limited
Warranty
Finishes
• Grey (Std.)
• Black
Riser Diagram
Listings and Approvals
EAX-2500S
Power
Supply
ANSI/BHMA
A156.29
90-800
UL Listed
Horn/Strobe
Magnetic Switch
Exit
Device
October 24, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
DEx10 DEx20/21 DEx30 DEx40 DEx50/51
Delayed Egress
The DE EasyKits provide a secure 2-point locking system with 15-second delay and 100dB alarm when
someone attempts to exit. The DE EasyKit is ideal for retail stores, healthcare, assisted-living facilities,
childcare, sports arenas and any location where a special locking delayed exit is required to prevent
theft or to protect those trying to exit.
(Shown with 10 Series Rim Exit Device - Available with 10/40 Rim, 30 Mortise and 20/21/50/51 Surface Vertical Rod Devices)
Benefits
• Best-in-class components provide
for fast, easy installation
• All hardware items provided with
one easy-to-order, easy-to-specify
part number
Features
• Configured Delayed Egress
EasyKit includes all hardware,
instructions, riser illustration and
point-to-point wiring diagram
• Factory-programmed, pre-wired
delayed egress controller / power
supply
• Advantex panic device has
stainless steel deadlocking
Pullman-type latch bolt
• 100dB Alarm
• Controls foot traffic, deters
unauthorized exits, reduces
employee and customer theft
while providing a life safety, codecompliant application
• Key switch with LED's and horn
are mounted on the wall,
protecting the electronics from
swinging into the weather
• Electromagnetic lock has 1500+
lbs of holding force
• Remote bypass and signaling
options available
• Form C, momentary key switch
with green and red LEDs, arms,
disarms and resets system
• Heavy-duty angled end cap
deflects damage away from panic
device
• Code-compliant delayed
egress signage
• Available in various configurations,
for single and paired openings
• Hardware is non-handed (10/40)
or reversible
• Easily add various access control
options with or without an antitailgating option
• Fire Alarm override connected at
controller / power supply
Mechanical Options
• F - 3-Hour Fire Rated
• LD - Less Dogging
• 48 - Fits 48" Door Width
• H - Hurricane Rated
• 36 - Fits 36" Door Width (Std.)
• 99 - Surface Strike
• CD - Cylinder Dogging
Electrical Options
• 1 to 3 second adjustable
nuisance alarm
• 98 - Semi Mortise Strike
• 120 Volt in/24 Volt out (Std.)
• Also available 277 Volt and
240 Volt
Accessories
• SN1 – Sex Nut Fasteners
• SSK - Torx Security Screw Kit
• Various brackets/spacers for
Magnetic Lock(s)
• Minimum Stile - Advantex 10, 20
Series: 4-5/8" with surface strike or
4-1/8" with optional semi-mortise
strike
• Minimum Stile - Advantex 40, 50
Series: 2" with standard semimortise strike or 2-1/2" with
optional surface strike
612 / US10 Brushed Bronze
613 / US10B Oil Rubbed Bronze
629 / US32
• GB - Glass Bead Kits
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
Finishes
605 / US3
606 / US4
611 / US9
Polished Brass
Brushed Brass
Polished Bronze
Dimensions - (10 Series Shown)
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Listings and Approvals
Advantex
UL Listed
Panic Hardware
18”
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable
Mullion
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
32 1/2”
ANSI/BHMA certified A156.3
Riser Diagram
Meets NFPA 80 & 101
for Life Safety
Delayed Egress
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
}
10/40
Series Only
State of Florida Approval
FL9052
California State Fire Marshall 4140-0127:105 and
3725-0127:108
Detex Limited Warranty
Advantex - 10 Year Mechanical /
3 Year Electrical Manufacturers
Limited Warranty
October 24, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
WDEx10
Weatherized Delayed Egress
The WDE EasyKits provide a secure 2-point locking system with 15-second delay and 100dB alarm
when someone attempts to exit. The WDE EasyKit is perfect for garden center gates amusement
parks, sports arenas and any location exposed to weather or moisture where delayed exit is required.
Although ideal in helping prevent theft, in applications such as outdoor childcare and assisted living
homes, WDE EasyKit can also be used to help protect those trying to exit.
Shown with 10 Series Rim Exit Device - Available with 10/40 Rim (For Mortise and Vertical Rod Applications contact factory)
Benefits
• Best-in-class components provide
for fast, easy installation
• All hardware items provided with
one easy-to-order, easy-to-specify
part number
Features
• Configured Weatherized Delayed
Egress EasyKit includes all hardware, instructions, riser illustration
and point-to-point wiring diagram
• Factory-programmed, pre-wired,
delayed egress controller/power
supply
• NEMA 4X enclosure protects
controller/power supply from
moisture and corrosive elements
• Advantex Weatherized panic
device has stainless steel deadlocking Pullman-type latch bolt
• Immersion-proof switching and
corrosion resistant components
provide years of trouble-free
service
• Controls foot traffic, deters
unauthorized exits, reduces
employee and customer theft
while providing a life safety, code
compliant application
• 10 ft. flex conduit loop
• Outdoor, code-compliant delayed
egress signage
• Outdoor electromagnetic lock has
1500+ lbs of holding force
• Form C, momentary key switch
with green and red LEDs, arms,
disarms and resets system
• Outdoor protective key switch
cover
• Outdoor horn has various fieldadjustable tone and decibel
settings. Strobe also available.
• All hardware is non-handed
• Fire Alarm override connected at
controller/power supply
• Remote bypass and signaling
options available
• Heavy-duty angled end cap
deflects damage away from panic
device
• Available in various configurations,
for single and paired openings
Mechanical Options
• F - 3-Hour Fire Rated
• HD - Hex Dogging
• 48 - Fits 48" Door Width
• H - Hurricane Rated
• LD - Less Dogging (Std.)
• 99 - Surface Strike (Std.)
• CD - Cylinder Dogging
• 36 - Fits 36" Door Width (Std.)
• 98 - Semi Mortise Strike
Electrical Options
• 1 to 3 second code-compliant
field-adjustable nuisance alarm
• 120V AC (Std.)
• Also available 277V and 240V
logic controller/power supply
Accessories
• SN1 – Sex Nut Fasteners
• SSK - Torx Security Screw Kit
• Z bracket spacers for Magnetic
Lock(s)
• Door Types - Hollow Metal,
Fiberglass or Aluminum
• Stile - Advantex fits minimum
4-5/8" with 99 strike
• Gate plate must accommodate
panic device, see dimensions
• Gate Types - Gate plate must be
at least 32" wide
• 1/4" maximum for vertical gap
between gate and strike post
• GB - Glass Bead Kits
Technical Information
Finishes
605 / US3
606 / US4
611 / US9
Polished Brass
Brushed Brass
Polished Bronze
612 / US10 Brushed Bronze
613 / US10B Oil Rubbed Bronze
629 / US32
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Listings and Approvals
Advantex
Dimensions - (10 Series Shown)
UL Listed
Panic Hardware
LISTED
18”
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable Mullion
Meets ADA requirements
MIL-STD 810F, Method 506.4
(Driving Rain Test)
MIL-STD 810F, Method 509.4
(Salt fog Test)
UBC 97, Standard 7-2 and
32 1/2”
UL10C for positive pressure
Riser Diagram
ANSI/BHMA certified
FROM 120VAC SOURCE
NEMA 4X ENCLOSURE (WEATHERPROOF)
DETEX POWER SUPPLY &
LOGIC CONTROLLER
(INSTALLED INSIDE NEMA 4X
ENCLOSURE)
FROM FIRE ALARM RELAY
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
}
10/40 Series
Only
State of Florida Approval FL9052
California State Fire Marshall 4140-0127:105 & 3725-0127:108
DETEX HORN MOUNTED TO 4x4
WEATHERIZED BACK BOX
Detex Limited Warranty
DETEX
ELECTROMAGNETIC LOCK
(weatherized)
Advantex - 10 Year Mechanical /
3 Year Electrical Manufacturers
Limited Warranty
PROTECTIVE COVER
WITH ADAPTOR PLATE
FOR SURFACE BACK BOX
DETEX KEYSWITCH SPDT WITH LED ON
SINGLE GANG WEATHERIZED BACK
BOX
DETEX WEATHERIZED
FLEX CONDUIT KIT
(TYPICAL EACH GATE LEAF)
OUTDOOR GATE SIGN
NFPA 15 SECOND SIGN
(TYPICAL EACH GATE LEAF)
DETEX PANIC HARDWARE
WITH WEATHERIZED PUSHPAD
SWITCHING
(TYPICAL EACH GATE LEAF)
October 24, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EDx10 EDx20/21 EDx30 EDx40 EDx50/51
Electric Dogging
The Electric Dogging EasyKits are designed for entrance and exit doors that require panic or fire
exit hardware. When energized, and after the pushpad is depressed, the pushpad and the latch bolt
remain retracted, providing push-pull operation. Relocking all devices is accomplished by using a
single switch or through a fire alarm input. All components required for this installation are included in
one easy-to-order kit.
Also Included:
Outside Trim (Call
Factory for Options)
Wiring Diagram
Power Supply
(80-800 Shown)
Electric Dogging Exit Device
(10 Series Shown)
(Shown on 10 Series Rim Exit Device - Available with 10/40 Rim, 30 Mortise and 20/21/50/51 Surface Vertical Rod Devices)
Benefits
• Best-in-class components provide
for fast, easy installation
Features
• Configured Electric Dogging
EasyKit includes all hardware,
instructions, riser illustration and
point-to-point wiring diagram
Mechanical Options
• F - 3-Hour Fire Rated exit device
• All components included in one,
easy-to-specify part number
• Great for locking down large
campuses, using a single switch
• Advantex panic device has
stainless steel deadlocking
Pullman-type latch bolt
• Heavy-duty angled end cap
deflects damage away from
panic device
• Exit hardware (10/40) is nonhanded or reversible
• Available in various configurations,
for single or paired openings
• 36 - Fits 36" door width (Std.)
• 99 - Surface strike (Std.)
• 48 - Fits 48" door width
• 98 - Semi mortise strike
• Various configurable cylinder trims,
pulls and levers (Call factory for
specific details)
• GB# - Glass Bead Kits
• 80-800 Power Supply - 24VDC
filtered, regulated with fire loop
connection
• PP-5152-2 24VAC Transformer
Accessories
• SN1 - Sex Nut Fasteners
Electrical Options
• Request to Exit (EX)
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Stile - Fits Minimum 4-5/8"
with 99 strike (Std.)
• Machine and Sheet Metal Screws
(Std.)
• Door Thickness - Fits standard
1-3/4" - 2-1/4" (for other door
thicknesses, contact factory)
• Door Stile - Fits Minimum 4-1/8"
with 98 strike
• Rail is heavy ribbed aluminum
extrusion
• 605 / US3 - Polished Brass
• 612 / US10 - Brushed Bronze
• 606 / US4 - Brushed Brass
• 613 / US10B - Oil Rubbed Bronze
• 629 / US32 - Polished Stainless
Steel
Finishes (Advantex)
• 611 / US9 - Polished Bronze
Riser Diagram
• 630 / US32D - Brushed Stainless
Steel
Dimensions
EX - Request
to
Exit Switch
Output
(optional)
80-800 Power Supply
(sold separately)
115VAC
input
18”
32 1/2”
10 Series Dimensions Shown
ED ELECTRIC
DOGGING
Activation
Switch
Detex Limited Warranty
Advantex - 10 Year Mechanical /
3 Year Electrical Manufacturers
Limited Warranty
Listings and Approvals(on 10
and 40 Series Devices)
Listings and Approvals(on
20/21/50/51 Series Devices)
UL Listed
UL Listed
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable
Mullion
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
8'x10' pairs of doors
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval
FL9052
California State Fire Marshall 4140-0127:105 and
3725-0127:108
October 24, 2012
for Life Safety
California State Fire Marshall 4140-0127:105 & 3725-1027:108
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
EDKx10 EDKx20/21 EDKx30 EDKx40 EDKx50/51
Electric Dogging for Lockdown
The Electric Dogging EasyKits are designed for any door in any type of building where imminent
danger to occupants requires immediate and simultaneous locking of multiple doors within the facility.
When energized, and after the pushpad is depressed, the pushpad and the latch bolt remain retracted,
providing push-pull operation. On-board key switch provides complete control of each device to
key-holder. Immediate relocking of all devices is accomplished by using an external single switch or
through a fire alarm input. LEDs offer visual indications of system status. All components required for
this installation are included in one easy-to-order kit. For facilities with multiple doors, additional kits,
without the central control switch, can be ordered.
Also Included:
Electric Dogging with Key Control
Exit Device - EDK
(10 Series Shown)
03C
Trim
Outside Trim (Call
Factory for Options)
Transformer
(PP-5152-2
Shown)
Wiring Diagram
Central
Control Switch
(Shown on 10 Series Rim Exit Device - Available with 10/40 Rim, 30 Mortise and 20/21/50/51 Surface Vertical Rod Devices)
Benefits
• Best-in-class components provide
for fast, easy installation
• Red and Green LED’s provide
line-of-sight status indication
• Great for locking down large
campuses, using a single switch
• On board key switch provides
easy on-off switching for individual
door control
• All components included in one,
easy-to-specify part number
Features
• Configured Electric Dogging
EasyKit includes all hardware,
instructions, riser illustration and
point-to-point wiring diagram
• Advantex panic device has
stainless steel deadlocking
Pullman- type latch bolt
• Heavy-duty angled end cap
deflects damage away from
panic device
• Exit hardware (10/40) is nonhanded or reversible
• Available in various configurations,
for single or paired openings
• 36 - Fits 36" door width (Std.)
• 99 - Surface strike (Std.)
• 48 - Fits 48" door width
• 98 - Semi mortise strike
• Various configurable cylinder trims,
pulls and levers (Call factory for
specific details)
• GB# - Glass Bead Kits
• 80-800 Power Supply - 24VDC
filtered, regulated with fire loop
connection
• PP-5152-2 24VAC Transformer
Mechanical Options
• F - 3-Hour Fire Rated exit device
Accessories
• SN1 - Sex Nut Fasteners
Electrical Options
• Request to Exit (EX)
• ED without key control can be
ordered for doors that do not
require individual control
Technical Information
• Door Types - Wood, Hollow
Metal, Fiberglass or Aluminum
• Door Stile - Fits Minimum 4-5/8"
with 99 strike (Std.)
• Machine and Sheet Metal Screws
(Std.)
• Door Thickness - Fits standard
1-3/4" - 2-1/4" (for other door
thicknesses, contact factory)
• Door Stile - Fits Minimum 4-1/8"
with 98 strike
• Rail is heavy ribbed aluminum
extrusion
• 605 / US3 - Polished Brass
• 612 / US10 - Brushed Bronze
• 606 / US4 - Brushed Brass
• 613 / US10B - Oil Rubbed Bronze
• 629 / US32 - Polished Stainless
Steel
Finishes (Advantex)
• 611 / US9 - Polished Bronze
Riser Diagram
• 630 / US32D - Brushed Stainless
Steel
Dimensions
EX - Request to
Exit Switch
Output
(optional)
PP-5152-2 Transformer
115VAC
input
18”
32 1/2”
10 Series Dimensions Shown
ED ELECTRIC
DOGGING
Activation
Switch
Detex Limited Warranty
Advantex - 10 Year Mechanical /
3 Year Electrical Manufacturers
Limited Warranty
Listings and Approvals
(on 10 and 40 Series Devices)
Listings and Approvals
(on 20/21/50/51 Series Devices)
UL Listed
UL Listed
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable
Mullion
Meets ADA requirements
UBC 97, Standard 7-2 and
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and
8'x10' pairs of doors
Meets ADA requirements
UBC 97, Standard 7-2 and
UL10C for positive pressure
UL10C for positive pressure
ANSI/BHMA certified A156.3
ANSI/BHMA certified A156.3
Meets NFPA 80 & 101
Meets NFPA 80 & 101
for Life Safety
for Life Safety
California State Fire Marshall -
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
State of Florida Approval
FL9052
California State Fire Marshall 4140-0127:105 and
3725-0127:108
October 24, 2012
4140-0127:105 & 3725-1027:108
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
AODx10 AODx20/21 AODx30 AODx40 AODx50/51
Automatic Operated Doors
The AOD EasyKits provide a pre-wired Automatic Operated Door system. Ideal ADA access at
healthcare facilities, assisted living homes, main public entrances, places of worship, convention
centers, sports arenas and any location requiring low energy, automatic operated doors with an exit
device. The AOD EasyKit includes the Advantex Latch Retraction exit device, and the AO19 lowenergy door operator, with a built-in, pre-wired power supply.
Shown with 10 Series Rim Exit Device - Available with 10/40 Rim, 30 Mortise and 20/21/50/51 Surface Vertical Rod Devices
Benefits
• Automatic Operator is pre-wired
with the latch retraction power
supply, making installation fast
and easy
• Best-in-class conponents provide
years of trouble-free operation
Features
• AO19 includes adjustable time
delay, push-and-go reverse on
obstruction and sequencing for
vestibule doors
• Stainless steel deadlocking
Pullman type latch bolt
Mechanical Options
• AO19 available Left Hand (LH),
Right Hand (RH), Push or Pull,
Aluminum (AL) or Dark Bronze
(BZ)
Electrical Options
• 120 Volt in / 24 Volt out (Std.)
• The reliable AO19 offers all the
features you expect in an automatic
door operator at no extra cost
• Turnkey, complete with everything
needed, without a complicated
installation job
• Heavy-duty angled end cap deflects
damage away from panic device
• Available in various configurations,
for single and paired openings
• Easily add various access control
options with or without an antitailgating option
• EasyKits available with various
rim, surface vertical rod, and
mortise exit devices to fit various
single, pairs and double egress
applications
• 48 - Fits 48" Door Width
• 36 - Fits 36" Door Width (Std.)
• 98 - Semi Mortise Strike
• Also available 277V and EE Electric Delayed Egress
Accessories
• SN1 – Sex Nut Fasteners
• All hardware items, plus riser and
wiring diagrams provided with
one easy-to-order, easy-to-specify
part number
• GB# - Glass Bead Kits
• F - 3-Hour Fire Rated
• 99 - Surface Strike (Std.)
Technical Information
• Door Types - Wood, Hollow Metal,
Fiberglass or Aluminum
• Minimum Stile - Advantex 10, 20
Series: 4-5/8" with surface strike
or 4-1/8" with optional semi-mortise
strike
• Minimum Stile - Advantex 40, 50
Series: 2" with standard semimortise strike or 2-1/2" with
optional surface strike
Finishes (Advantex Products Only)
605 / US3
606 / US4
611 / US9
Polished Brass
Brushed Brass
Polished Bronze
612 / US10 Brushed Bronze
613 / US10B Oil Rubbed Bronze
Listings and Approvals
Dimensions (10 Series Shown) AO19
Certified to
ANSI/UL 325-2006
Tested - ANSI 156.10
and 156.19
18”
Meets ADA
requirements
629 / US32
Polished Stainless
Steel
630 / US32D Brushed Stainless
Steel
Listings and Approvals
Advantex 10/40 Series
UL Listed
Panic Hardware
LISTED
LISTED
UL Listed Fire Exit Hardware
for 3 hours, maximum
4'x10' single doors and pairs of
4'x8' with F90KR key removable
Mullion
Meets ADA requirements
Certified to
CAN/CSA 247-92
32 1/2”
UBC 97, Standard 7-2 and
UL10C for positive pressure
ANSI/BHMA certified A156.3
3-Hour Fire
Listed
Meets NFPA 80 & 101
for Life Safety
Miami-Dade County, Florida
NOA 10-0303.02 EXP. 04/07/15
Riser Diagram
State of Florida Approval
FL9052
}
10/40 Series
Only
California State Fire Marshall 4140-0127:105 and
3725-0127:108
Detex Limited Warranty
Advantex - 10 Year Mechanical /
3 Year Electrical Manufacturers
Limited Warranty
AO19-1 LH Push
J
Shown with
10 Series
Electric Latch
Retraction (ER)
November 28, 2012
J-box
(sold separately)
Detex flexible conduit
with connections
(optional)
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
PROXI
PEN
ProxiPen
Compact Reader for RFID Tags
In today's rapidly-changing information society, large corporations and small companies alike
increasingly require modern data collection and auto-ID systems. To meet these demands, GCS has
developed an innovative data acquisition unit, the "ProxiPen." The ProxiPen reads radio frequency
identification (RFID) tags and other transponders automatically, and can fully satisfy the data collection
needs of both commercial and industrial applications.
Benefits
• ProxiPen can read RFID tags
even if they are wet, frosty, dirty,
greasy, or painted over
• RFID tags can be concealed behind
wallpaper, wallboard, plaster,
paneling, mirrors or any other
nonmetallic surface - a real plus in
applications where aesthetics or
vandalism are considerations
Features
• Compact, lightweight, simple to
operate
• Tough waterproof polycarbonate
housing
• ProxiPen "autosenses" and reads
RFID tags whenever they come
into its reading range
• Low power consumption - requires
one "AA" commercial alkaline,
lithium or rechargeable battery that
can be replaced by user without
any special tools
• Resists heat, shock and hydrocarbons
• Powered by one "AA" commercial
alkaline, lithium or rechargeable
battery
Applications
• Guard Tour
• Cleaning
• Maintenance
• Attendance
• Recording Service Activities
• High memory capacity (4,063
readings) - can be used for long
periods in the field without the
need for frequent downloading
• Easy to use; no external controls
• Reads RFID proximity tags
• Provides visible and audible
indications to confirm information
has been read
Technical Information
• Dimensions: 6.5"L x 1.26"W x
0.98"H (L165 x W32 x H25mm)
• Weight: 4.94 oz. (142g)
• Operating Temperature Range:
-4°F to +158°F (-20°C to +70°C)
• Approved Tags: World TAG
Unique dia. 1.18" (30mm); World
TAG NOVA brick 0.2" (3mm);
World TAG NOVA dia. 0.79"/1.18"/
1.97" (20/30/50mm); Protag
• Memory Capacity: 4,063 readings
• Internal Protection Grade: IP67
• Time Resolution: 1 minute
• Mechanical Shock Resistance:
Free fall from 5 ft. (1.5m) on
concrete
• Data Transfer: By RFID; 2400 to
57600 Baud
• TAG Frequency: 125 kHz
• Reading Distance: 0.12" to 0.71"
(3-18mm) depending on size of
transponder and condition of
battery. Reads through nonmetallic
materials.
• Download Time: Approx. 1 minute
(full memory)
• Housing: Polycarbonate
• Potting Material: Silicon or
equivalent
• Power Supply: One "AA" cell, 1.5v
• Approved Batteries: Duracell®
Ultra; Energizer® HI Energy lithium;
Duracell Supreme AA 2650 mAH
Rechargeable
• Time Permitted for Battery Change:
3 minutes maximum
• Battery Life in Standby Mode:
Approx. 1 year
• Number of Readings with one
Approved Alkaline Battery:
Approx. 50,000
• EMC: EN 55022, EN 61000 4-3,
EN 61000 4-2
• Accessories: Leather holster with
belt clip
Detex Limited Warranty
3 Year Limited Manufacturers
Warranty
October 24, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
ProxiPen Kit
Proximity-Based Guard Tour Verification System
The GCS® ProxiPen Kit from Detex is the total solution for your guard tour verification requirements
and other data collection tasks. It includes everything you need to quickly and easily set up a complete
guard tour system that features the innovative ProxiPen RFID tag reader and user-friendly TopGuard
Patrol communication and reporting software.
Features and Benefits
• ProxiPen's data points are RFID
tags, which ProxiPen senses and
reads automatically whenever they
come into its reading range
• ProxiPen can read a tag even if it
is wet, frosty, dirty, greasy, or
painted over.
• ProxiPen’s RFID tags may be
concealed behind wallpaper,
sheetrock, plaster, paneling, mirrors
or any other nonmetallic surface;
a real plus in applications where
aesthetics or vandalism are
considerations.
• ProxiPen is compact, lightweight
and easy to use, with no external
controls.
• Correct data readings are
confirmed by visible and audible
signals.
• ProxiPen's electronics are sealed in
a tough polycarbonate housing,
making the reader completely
waterproof and shock-resistant.
• ProxiPen delivers 50,000 data
readings from one “AA” battery,
which is user-changeable
without tools (or loss of data,
which is preserved in non-volatile
memory).
• ProxiPen’s anti-tampering features
discourage unauthorized battery
removal.
• TopGuard Patrol software makes it
easy to set up tours, download and
evaluate collected data and prepare
reports, which may be saved and/
or e-mailed in HTML or PDF format.
• TopGuard Patrol is easily
customized to accommodate any
data collection application, including
maintenance, service, cleaning,
attendance and asset tracking.
Control points, incidents,
personnel, equipment, inventory or
activities can be assigned to an
RFID tag.
• An optional PLUS version of
TopGuard Patrol provides extended
capacity, more reporting options
and other advanced, high-utility
features.
• The TopGuard Patrol software can
be used with other GCS data
acquisition hardware—including
the popular Escorte system—in
combination with the ProxiPen if
so desired.
Kit Contents
Qty.
1
1
1
1
20
Part No.
PROXIPEN-2
GCS-PP-DTU
GCS-PP-DTU-USB
GCS-TGP
GCS-PP-TAG30-U
Description
ProxiPen RFID Tag Reader
Data Transfer Unit (DTU) for ProxiPen (serial or USB port)
USB Data Cable for ProxiPen DTU
TopGuard Patrol Software*
RFID Tag, 30mm diameter
System Requirements
Options & Accessories
Detex Limited Warranty
Minimum System:
• ProxiPen Holster (GCS-PP-HOL)
• Intel® 486 processor (or
compatible)
• 16 MB RAM
• 50 MB hard disk
• Screen resolution 800 x 600
• USB port (for DTU)
• Belt Clips for ProxiPen Holster
(HOLST-PP-CLIP)
1 Year Limited Manufacturers
Warranty (3 years on ProxiPen)
Recommended System:
• Intel® Pentium® Dual-Core E5700
3.0 GHz processor (or
compatible)
• 2 GB RAM
• 500 GB hard disk
• Screen resolution 1024 x 768
• USB port (for DTU)
Works under Windows® 2000, XP,
Vista and Windows 7.
The TopGuard Patrol software can
be used on a stand-alone PC or on
a workstation in a network. There is
not a network version of TopGuard
Patrol; however, multiple workstations having TopGuard Patrol PLUS
installed can be configured to share
downloaded data and produce
reports independently.
NOTE: The optional TopGuard
Patrol PLUS software also requires
that the PC have an additional USB
port, as it includes a copy protection
device that must be attached to a
USB port in order for the software
to operate.
• Serial Data Cable for ProxiPen
DTU (GCS-PP-DTU-CAB)***
• Power Supply for ProxiPen DTU,
120/240 VAC, with USA/UK/EUR
adapters (GCS-PP-DTU-PS)***
• ProxiPen Incident Book, with 20
RFID tags (GCS-PP-INCBK)
• RFID Tag, 50mm diameter
(GCS-PP-TAG50-N)
• RFID Tag, 20mm diameter
(GCS-PP-TAG20-N)
• Wristband RFID Tag
(GCS-PP-WB-U)
• Proximity RFID Card with
Magstripe (GCS-PP-CRD-U)
• Keyfob RFID Tag (GCS-PP-KF-U)
• TopGuard Patrol PLUS
Software** (GCS-TGPLUS)
*** Only required if Data Transfer Unit (DTU) cannot
be connected to a USB port
* TopGuard Patrol has been previously released as “WinDau Standard Edition” and “TopGuard Primo.”
** TopGuard Patrol PLUS has been previously released as “WinDau Enterprise Edition.”
October 24, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Guard Tour Communication and Reporting Software
TopGuard Patrol® is a versatile guard tour software application from GCS. It is a communication tool
for all GCS data acquisition units, combined with a report generator. It includes a Microsoft® Access
database and the most modern programming tools, so it's powerful, yet easy to use. And TopGuard
Patrol* can be quickly configured to display in a variety of languages.
TopGuard Patrol - Report
Summary report
All tours
11/1/2005 12:00:00 AM ... 11/14/2005 11:59:59 PM
Created by TopGuard v1.1.0 - General Control Systems GmbH
Date
Time
DAU: ProxiPen 2001#00000168
Downloaded 11/2/2005 08:33
11/1/2005
23:01
Description
Status
Ann Hannwacker
P.
Personnel
(1) Detex Offices 11/1/2005 23:02 [Personnel: Ann Hannwacker / 11/1/2005 11:01]
11/1/2005
23:02
START - Visitor Entrance
T. Tour Start Control Point
11/1/2005
23:05
Reception Area
*.
Valid
11/1/2005
23:08
Mailroom
*.
Valid
11/1/2005
23:11
Conference Room
*.
Valid
11/1/2005
23:12
LIGHTS ON
I.
Incident
11/1/2005
23:15
Coffee Bar
*.
Valid
11/1/2005
23:18
Copy Room
*.
Valid
11/1/2005
23:22
North Entrance
*.
Valid
11/1/2005
23:22
DOOR NOT SECURED
I.
Incident
11/1/2005
23:25
Tech Support/Repairs
*.
Valid
11/1/2005
23:28
Engineering
*.
Valid
11/1/2005
23:31
South Entrance
*.
Valid
11/1/2005
23:33
Inside Sales
*.
Valid
11/1/2005
23:33
Copy Room
D. Double or multiple
MIS Center
M. Missing
- Incomplete! 1/12 Missing / Time needed 0:31
(1) Detex Offices 11/2/2005 0:02 [Personnel: Ann Hannwacker / 11/1/2005 11:01]
11/2/2005
00:02
START - Visitor Entrance
T. Tour Start Control Point
11/2/2005
00:04
Reception Area
*.
Valid
11/2/2005
00:07
Mailroom
*.
Valid
11/2/2005
00:10
Conference Room
*.
Valid
11/2/2005
00:12
Coffee Bar
*.
Valid
11/2/2005
00:15
Copy Room
*.
Valid
Benefits
• TopGuard Patrol software makes
it easy to set up tours, download
and evaluate collected data and
prepare reports, which may be
saved and/or e-mailed in HTML or
PDF format
• PLUS Version provides extended
capacity, more reporting options
and other advanced, high-utility
features
Features
• Uses Microsoft® Access database
• PP-Modem utility allows modem
transfer of data from remote sites
• Built-in utility communicates with
GCS data acquisition and transfer
units - checks battery status, sets
date/time, defines dialing
parameters for modem transfer
*TopGuard Patrol has been previously released
as "WinDAU Standard Edition" and "TopGuard
Primo." TopGuard Patrol PLUS has been previously
released as "WinDAU Enterprise Edition."
• With fully user-editable text fields,
TopGuard Patrol can be customized
to accommodate any data collection
application, including maintenance,
service, cleaning, attendance or
asset tracking
• Can be used on a stand-alone PC
or on a workstation in a network
• TopGuard Patrol - Basic Version:
Up to 1,750 data media (magnetic
data strips, RFID tags or optical
bar codes can be programmed as
incidents, personnel or control
points in up to 16 rounds. Includes
one comprehensive evaluation
report format.
• TopGuard Patrol PLUS Enhanced Version: Up to 7,500
data media (magnetic data strips,
RFID tags or optical bar codes can
be programmed as incidents,
personnel or control points in up to
250 rounds. Includes six different
report formats with four report
options.
• Password requested on startup
prevents unauthorized access to
master files and configuration of
data acquisition units.
• Data is also protected by a CRC
checksum to prevent manipulation
• TopGuard Patrol PLUS - Ability to
create maps of tours using
imported JPG or BMP images
Reports (TopGuard Patrol PLUS only)
• Six (6) Report Formats:
• Summary Report
• Personnel Report
• Control Point Report
• Incident Report
• Break Report
• Database History Report
System Requirements
Minimum System:
• Intel® 486 processor (or
compatible)
• 16 MB RAM
• 50 MB hard disk
• Screen resolution 800 x 600
• USB port (for DTU)
• Four (4) Report Options
(Summary and Personnel Report
only)
• Print missing control points
• Print Exceptions
• Print missing control points
• Summary only
Recommended System:
• Intel® Pentium® Dual-Core E5700
3.0 GHz processor (or
compatible)
• 2 GB RAM
• 500 GB hard disk
• Screen resolution 1024 x 768
• USB port (for DTU)
Works under Windows® 2000, XP,
Vista and Windows 7
NOTE: In addition, TopGuard Patrol
PLUS includes a copy protection
device that must be attached to a
USB data port on the PC in order
for the software to operate.
TopGuard Patrol can be used on a stand-alone PC or on a workstation in a network. There is not a network
version of TopGuard Patrol; however, multiple workstations having TopGuard Patrol PLUS installed can be
configured to share downloaded data and produce reports independently.
Password Protection
Each time TopGuard Patrol is
started, the password is requested.
You may log in as the administrator
or a user, as required. This
prevents unauthorized access
to master files and configuration
of data acquisition units. The
downloaded data is also protected
by a CRC checksum to prevent
manipulation.
Programming and
Downloading
Tours are easily defined by
manually entering or downloading
control points from a data
acquisition unit into a control point
“pool.” Collected data is evaluated
immediately after downloading it to
the computer, and within seconds
you can view the report on the
screen. GCS magnetic data strips,
RFID tags and bar codes can
be used as control points or for
predefined incidents or personnel
identification. Reports may be
printed, saved to a file or sent by
e-mail in native TopGuard Patrol
format or as an HTML or Adobe
Acrobat® PDF file.
November 1, 2012
Configuration of
Data Acquisition and
Transfer Units
The built-in utility function
communicates with all GCS
ProxiPen and Escorte data
acquisition units and the ProxiPen
data transfer unit. It can be used
to check the battery status, set
the date and time, define dialing
parameters for data transfer by
modem and other tasks.
Detex Limited Warranty
1 Year Limited Manufacturers
Warranty
Modem Transfer
Data transfer by modem allows
recorded data to be downloaded
from different remote sites to a
central station for creating and
evaluating reports at one central
site. The recorded data stays in
the memory of the data acquisition
unit until the local modem confirms
correct receipt of all data. The
PP-Modem utility, included with
TopGuard Patrol, communicates
with and downloads the remote
devices.
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Guardsman Watchclock System
GDS-12
Mechanical Watchclock
The Guardsman provides unique, unbroken, mechanical supervision of your security officers on
weekends and during holidays and extended plant closings, as well as on weeknights. The system is
simple, reliable and inexpensive.
Unlike most other watchclocks, the Guardsman operates on a continuous roll of tape. This records
your security officer's activities for up to 120 hours, if need be, without changing the tape. Good
practice forbids the officer from changing the tape himself; insurance regulations prohibit it. Thus, a
firm using a watchclock system of lesser recording capacity must have a supervisor return to the plant
to change the recording dial every 24 hours. For this, the supervisor often must be paid at overtime
rates. The Guardsman's extra capacity eliminates this problem.
OBSOLETE AS OF
DECEMBER 31, 2011
Benefits • Provides motivation for security
officers to perform their assigned
rounds, plus conclusive documentation that they have done so
• Easy to install using simple tools a drill and a screwdriver
• Helps reduce the risk of fire,
burglary, vandalism and industrial
mishaps thus saving money on
reduced insurance premiums
• Highly accurate eight-day shock
resistant movement with 11jeweled escapement
• Requires winding only once per
week
Features • Uninterrupted time-keeping for
up to 120 hours
• Embossed record made directly
from raised numerals on recording keys without ribbon, carbons,
or inking devices
• Accommodates up to 40 stations
• Tampering detector indicates if
clock has been opened or closed
• Rugged construction, including a
die-cast aluminum housing, heattreated crystal, and a riveted and
reinforced case of harness leather
• The recording tape has a ruled
space for each of the 24 hours
of every day. Since the tape is
synchronized with the clock
mechanism, each time a station
is registered, its embossed record
follows the previous registration.
Any omission by the officer shows
up as a prominent white space on
the tape.
• To extract the daily - or weekend record, simply push the tape
cutter. You have in your hand a
strip of tape which shows instantly
where the officer was throughout
his tour.
Operation • Install a key station at each
control point that the officer is to
visit during his rounds
• As the officer visits each control
point, he removes the recording
key from the station, inserts it into
the clock and turns the key. This
registers the station number on the
recording tape in the clock at the
correct time of day.
• Tapes are virtually impossible to
counterfeit, alter or tamper with
• When the tape is inspected, any
stations missed or rounds not
performed can be readily seen.
Key Stations • Key station models that meet
the requirements of every setting
• Easily and quickly installed by
plant or office maintenance
personnel, with only a screwdriver
and drill
• Each key station installed with
aluminum seals
• Any attempt by security personnel
to collect the keys causes damage
to seals, which is readily detected
by routine inspection
All- Purpose Indoor/
Outdoor Key Stations • Models SDC and SDA - surface
mounted with simple lift-up covers
for easy access
• Easily and quickly installed by
plant or office maintenance
personnel, with only a screwdriver
and drill
• Suitable for indoor or outdoor
factory and office locations
• SDC is molded from high-impact
Cycolac® (ABS) thermoplastic
Institutional Key Stations • Models SSK and SSKL - surface
mounted, recommended for
schools and other institutions
• Housing of drawn steel
• SSKL comes with cover lock to
discourage tampering
Replacement Stations • When ordering key stations, be
sure to state whether station
should include keys and chains
• Chain holding key made from
continuous links of stainless steel
• SDA is durable, powder coated
cast aluminum
• Specify key station identification
number desired and key station
model
• Chain is anchored such that any
attempt to detach it from the station
will create noticeable damage
Dimensions
Replacement Keys -
• Case - 6-1/2" Dia. x 2-3/4" Thick
• K2K-22 - state quantity and
station identification numbers
System Requirements• Guardsman Watchclock - GDS-12
• Key Stations Indoor/outdoor - SDC-90
(Cycolac® thermoplastic),
SDA-90 (Powder-coated cast
aluminum)
Institutional - SSKL-90
(drawn steel with cover lock) or
SSK-90 (drawn steel)
• Tapes - BX-Tapes
October 17, 2012
• Clock Dial - 1-7/8" Dia.
• Shoulder Strap - 55" Long
Detex Service
Factory regional sales and service
office in New Braunfels Texas operated under our supervision by
authorized distributors worldwide,
assure Detex users prompt and
convenient service everywhere.
Emergency loan equipment is
available.
• Key package includes - key, chain,
key shackle, seals, seal holders,
anchor and screws
Detex Limited Warranty
1 Year Limited Manufacturers
Warranty
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Newman Watchclock System
N-24
Mechanical Watchclock
The Newman was the first portable watchclock of American design to be sold in this country. Built to
a high standard of quality, ruggedly constructed, completely modernized and up-to-date, it is simple in
operation and provides maximum service with minimum wear.
OBSOLETE AS OF
DECEMBER 31, 2011
Benefits • Provides motivation for security
officers to perform their assigned
rounds, plus conclusive documentation that they have done so
Features • 24-hour record
• Embossed record made directly
from raised numerals on
recording keys without ribbon,
carbons, or inking devices
• Highly accurate eight-day shock
resistant movement with 11jeweled escapement
• Easy to install using simple tools a drill and a screwdriver
• Helps reduce the risk of fire,
burglary, vandalism and industrial
mishaps thus saving money on
reduced insurance premiums
• Accommodates up to 40 stations
• Dials are virtually impossible to
counterfeit, alter or tamper with
• Tampering detector indicates if
clock has been opened or closed
• Requires winding only once per
week
• Rugged construction, including a
die-cast aluminum housing, heattreated crystal, and a riveted and
reinforced case of harness leather
Operation • Install a key station at each
control point that the officer is to
visit during his rounds
• Insert a new record dial into the
clock, set the time and give the
clock to the security officer
• As the officer visits each control
point, he removes the recording
key from the station, inserts it into
the clock and turns the key. This
registers the station number on the
recording dial in the clock at the
correct time of day.
• The recording dial has a ruled
space for each of the 24 hours of
the day. The advancement of the
dial is synchronized with the clock
mechanism, so that each time a
station is registered, its number is
embossed at the correct time of
day and follows the previous
registration. The recording keys
are designed such that a missed
station causes a conspicuous gap
on the dial.
• The daily record is removed by
simply unsnapping the locknut
and removing the dial, and
inserting a new one.
• When the dial is inspected, any
stations missed or rounds not
performed can be readily seen.
Key Stations • Key station models that meet
the requirements of every setting
• Easily and quickly installed by
plant or office maintenance
personnel, with only a screwdriver
and drill
• Each key station installed with
aluminum seals
• Any attempt by security personnel
to collect the keys causes damage
to seals, which is readily detected
by routine inspection
• Chain holding key made from
continuous links of stainless steel
• Chain is anchored such that any
attempt to detach it from the station
will create noticeable damage
Complete System
Requirements• Newman Watchclock - N24
• Key Stations Indoor/outdoor - SDC-90
(Cycolac® thermoplastic),
SDA-90 (Powder-coated cast
aluminum)
Institutional - SSKL-90
(drawn steel with cover lock) or
SSK-90 (drawn steel)
All- Purpose Indoor/
Outdoor Key Stations • Models SDC and SDA - surface
mounted with simple lift-up covers
for easy access
• Easily and quickly installed by
plant or office maintenance
personnel, with only a screwdriver
and drill
• Suitable for indoor or outdoor
factory and office locations
• SDC is molded from high-impact
Cycolac® (ABS) thermoplastic
• SDA is durable, powder coated
cast aluminum
Watchclock Dimensions
• Case - 5-5/8" Dia. x 2-3/8" Thick
• Clock Dial - 2-3/16" Dia.
• Shoulder Strap - 55" Long
Detex Service
Factory regional sales and service
office in New Braunfels Texas operated under our supervision by
authorized distributors worldwide,
assure Detex users prompt and
convenient service everywhere.
Emergency loan equipment is
available.
Institutional Key Stations • Models SSK and SSKL - surface
mounted, recommended for
schools and other institutions
• Housing of drawn steel
• SSKL comes with cover lock to
discourage tampering
Replacement Stations • When ordering key stations, be
sure to state whether station
should include keys and chains
• Specify key station identification
number desired and model
Replacement Keys • K2K-22 - state quantity and
station identification numbers
• Key package includes - key, chain,
key shackle, seals, seal holders,
anchor and screws
Detex Limited Warranty
1 Year Limited Manufacturers
Warranty
• Dials - BX-3924
October 17, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Newman Quartz Watchclock System
Mechanical Watchclock
Our battery-operated Newman Quartz watchclock delivers all the dependability you'd expect from a
Newman, but with a reliable quartz movement. Like its famed mechanical counterpart, the Newman
Quartz watchclock provides a 24-hour record directly embossed on a paper time dial by means of
raised numerals on the recording keys. The Newman Quartz watchclock is lightweight and is built to
withstand rugged use with a die-cast aluminum housing and a tough, nylon case. And it never needs
winding.
OBSOLETE AS OF
DECEMBER 31, 2011
Benefits • Provides motivation for security
officers to perform their assigned
rounds, plus conclusive documentation that they have done so
• Helps reduce the risk of fire,
burglary, vandalism and industrial
mishaps thus saving money on
reduced insurance premiums
• Easy to install using simple tools a drill and a screwdriver
• Produces a secure, tamperresistant record with dials that are
virtually impossible to counterfeit,
alter or tamper with
• Economical - ideal for users with
restricted security budgets or sites
with up to 40 control points
• Never needs winding; one "AA"
battery provides one year of
trouble-free operation
Features • Lightweight and easy to carry
• Built to withstand rugged use with
a die-cast aluminum case
• Cover is secured by a lock
• The entire clock is enclosed in a
rugged nylon pouch
• 24-hour record embossed directly
on dials from raised numerals on
recording keys without ribbon,
carbons, or inking devices
• Highly accurate precision quartz
movement
• Accommodates up to 40 stations
• Tampering detector indicates the
exact time the case cover is
opened or closed
• A shoulder strap allows the clock
to be carried in a protected position
Operation • Install a key station at each
control point that the officer is to
visit during his rounds
• Insert a new record dial into the
clock, set the time and give the
clock to the security officer
• As the officer visits each control
point, he removes the recording
key from the station, inserts it into
the clock and turns the key. This
registers the station number on the
recording dial in the clock at the
correct time of day.
• The recording dial has a ruled
space for each of the 24 hours of
the day. The advancement of the
dial is synchronized with the clock
mechanism, so that each time a
station is registered, its number is
embossed at the correct time of
day and follows the previous
registration. The recording keys
are designed such that a missed
station causes a conspicuous gap
on the dial.
• The daily record is removed by
simply unsnapping the locknut
and removing the dial, and
inserting a new one.
• When the dial is inspected, any
stations missed or rounds not
performed can be readily seen.
Key Stations • Key station models that meet
the requirements of every setting
• Easily and quickly installed by
plant or office maintenance
personnel, with only a screwdriver
and drill
• Each key station installed with
aluminum seals
• Any attempt by security personnel
to collect the keys causes damage
to seals, which is readily detected
by routine inspection
• Chain holding key made from
continuous links of stainless steel
• Chain is anchored such that any
attempt to detach it from the station
will create noticeable damage
Complete System
Requirements• Newman Quartz Watchclock
• Key Stations Indoor/outdoor - SDC-90
(Cycolac® thermoplastic),
SDA-90 (Powder-coated cast
aluminum)
Institutional - SSKL-90
(drawn steel with cover lock) or
SSK-90 (drawn steel)
All- Purpose Indoor/
Outdoor Key Stations • Models SDC and SDA - surface
mounted with simple lift-up covers
for easy access
• Easily and quickly installed by
plant or office maintenance
personnel, with only a screwdriver
and drill
• Suitable for indoor or outdoor
factory and office locations
• SDC is molded from high-impact
Cycolac® (ABS) thermoplastic
• SDA is durable, powder coated
cast aluminum
Watchclock Dimensions
• Case - 5-5/8" Dia. x 2-3/8" Thick
• Clock Dial - 2-3/16" Dia.
• Shoulder Strap - 55" Long
Detex Service
Factory regional sales and service
office in New Braunfels Texas operated under our supervision by
authorized distributors worldwide,
assure Detex users prompt and
convenient service everywhere.
Emergency loan equipment is
available.
Institutional Key Stations • Models SSK and SSKL - surface
mounted, recommended for
schools and other institutions
• Housing of drawn steel
• SSKL comes with cover lock to
discourage tampering
Replacement Stations • When ordering key stations, be
sure to state whether station
should include keys and chains
• Specify key station identification
number desired and model
Replacement Keys • K2K-22 - state quantity and
station identification numbers
• Key package includes - key, chain,
key shackle, seals, seal holders,
anchor and screws
Detex Limited Warranty
1 Year Limited Manufacturers
Warranty
• Dials - BX-3924
October 17, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
RELI
ANT
Guard Tour Verification System Kit
Reliant PLUS from DETEX provides a complete, simple-to-use solution for guard tour verification and other datacollection tasks. The Reliant PLUS Kit includes everything you need to quickly and easily set up a complete
guard tour system that features the rugged Reliant data acquisition unit, stainless steel iButton® touch-memory
checkpoints and the user-friendly Reliant PLUS communication and reporting software.
Reliant Data Acquisition Unit
The Reliant Data Acquisition Unit (DAU) is a rugged, portable device with
no external controls that records and stores readings from the iButton
checkpoints, along with the time and date of each reading. The device
is protected by an enclosure of glass-reinforced polycarbonate (Lexan®).
Successful readings are confirmed both by audible and visible indicators.
The Reliant stores 5,460 readings in nonvolatile RAM. The unit will operate
for one year or 500,000 readings on three "AAA" batteries, which are userchangeable. The Reliant measures 3.88" x 1.9" x 1.36" (98.5mm x 48mm x
34.5mm) and weighs 5.3 oz. (150g).
REL-DAU
Reliant Data Transfer Unit
Touch-Memory iButton®
Checkpoints
Reliant Incident Book
REL-INCBK
REL-CKP
REL-DTU
The Reliant Data Transfer Unit (DTU)
transfers checkpoint readings from the
Reliant DAU to a PC for processing
into reports. The REL-DTU connects
to the PC via an RS-232 (serial) port
or a USB port.
The Reliant checkpoints use stainlesssteel touch-memory iButtons. Each
iButton has a unique 16-digit ID
number that identifies the checkpoint,
security officer, supervisor, etc. to
which it is assigned. The iButtons
are assembled into checkpoints
using clear polycarbonate shells
and mounted with the self-threading
screws provided.
Incidents may be recorded using the
Reliant Incident Book. Incidents are
pre-defined and assigned numeric
codes in the Reliant PLUS software.
Incidents observed by the officer are
recorded during a tour by entering
the incident's code, using the touchmemory keypad.
Reliant PLUS Software
Mobile Data Transfer Unit
Contents of Kit
1 - Reliant Data Acquisition Unit
1 - Nylon Holster
1 - Reliant Data Transfer Unit
1 - Reliant PLUS Software CD,
including User Manual (PDF)
2 - iButton® ID Keys
10 - Checkpoints (including
iButtons)
1 - Incident Book
REL-MDTU
Reliant PLUS is an easy-to-use
software application for communicating
with and configuring the Reliant
DAU, transferring and analyzing
tour data and producing reports
of officers' activities. Its Paradox
database provides powerful and
flexible reporting features, including:
• Filtered reports
• Performance/Exceptions report
• Missed Stations reports
The Reliant Mobile Data Transfer Unit,
with a capacity of 21,842 readings, can
collect the data from several Reliant
DAUs. This makes it unnecessary to
take a portable PC to several sites or
to bring the DAUs to a central location
for downloading.
iButton Mounting Options
Other options for mounting iButtons
include one-piece mounts in ABS
plastic or aluminum.
ABS Mount
(REL-CKP-MNT2)
iButtons for Officer &
Supervisor ID
iButton ID Badges and Keys are used
to identify officers or supervisors in
the reports, so that responsibility
for performance of tasks may be
assigned.
Aluminum Mount
(REL-CKP-MNT3)
Reliant PLUS also includes archiving
and database management and repair
functions.
ID Badge
(REL-BDG)
Detex Limited Warranty
2-Year Limited Manufacturers
Warranty
ID Keys
(REL-KF)
October 24, 2012
Detex Corporation
302 Detex Drive
New Braunfels, Texas 78130-3045 USA
PH. (830) 629-2900
(800) 729-3839
FAX (830) 620-6711
(800) 653-3839
http://www.detex.com
USA Sales:
marketing@detex.com
International Sales:
export@detex.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Create Date : 2008:11:21 09:14:23-06:00 Creator : Adobe InDesign CS2 (4.0.4) Modify Date : 2017:04:13 10:10:43-04:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Instance ID : uuid:54bb1fea-2f84-724b-8490-5c343a1d2c04 Document ID : adobe:docid:indd:8a1c3572-a75a-11dd-90c6-d287a6ff325f Rendition Class : proof:pdf Derived From Instance ID : bbba91b3-9f84-11dd-b284-813ec0d1d4c7 Derived From Document ID : adobe:docid:indd:5ddcd7a9-9aeb-11dd-80b4-dfe7b125666d Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Y Resolution : 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:511823C954A7DD11B8EBCE9FCECEBE3D, uuid:760d8cd6-bdb3-4d45-b509-7bb1315ade41, uuid:167A41162D2E11DCB00CB03D95D856D8, uuid:186C1F982D2F11DCB00CB03D95D856D8, uuid:7059EEE377D211DC962A87A3DEA41483, uuid:8F05929D2D2A11DCB00CB03D95D856D8, uuid:ADE8BDF3D7B7DD1192FCE13E65C3053D, uuid:A7E8BDF3D7B7DD1192FCE13E65C3053D Manifest Reference Document ID : uuid:84D273E7839FDD118DF0EC1F385154FC, uuid:679EA3B28426DD11AE0BE0EBC0BC1249, uuid:167A41152D2E11DCB00CB03D95D856D8, uuid:186C1F972D2F11DCB00CB03D95D856D8, uuid:7059EEE277D211DC962A87A3DEA41483, uuid:8F05929C2D2A11DCB00CB03D95D856D8, uuid:7A8B05FED5B7DD1192FCE13E65C3053D, uuid:5FD6DB4CD7B7DD1192FCE13E65C3053D Metadata Date : 2017:04:13 10:10:43-04:00 Creator Tool : Adobe InDesign CS2 (4.0.4) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 18196 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 334EXIF Metadata provided by EXIF.tools