Dialoc ID MR50-0001 MR50 Industrial Reader RFID User Manual manual

Download:
Mirror Download [FCC.gov]
Document ID	1083818
Application ID	gbw15t0s+XdOfCSNLLvTHw==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.69kB (133590 bits)
Date Submitted	2009-03-23 00:00:00
Date Available	2009-03-23 00:00:00
Creation Date	2009-03-09 10:17:40
Producing Software	Acrobat Distiller 8.0.0 (Windows)
Document Lastmod	2009-03-09 10:17:40
Document Title	Microsoft Word - MR5x Industrial Reader - Product Manual _v1.2_.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Rico

Product Manual
Version 1.2
MR50 Industrial Reader — Product Manual
v1.2
© 2009 Dialoc ID. All rights reserved.
Dialoc ID makes no warranty of any kind with regard to this material, including, but not
limited to, the implied warranties of merchantability and fitness for a particular purpose.
Dialoc ID shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this material.
Dialoc ID assumes no responsibility for the use or reliability of its equipment on equipment
that is not furnished by Dialoc ID.
Dialoc ID reserves the right to modify the software and hardware described in this manual at
any time without prior notice.
Trademarks:
This manual covers the following items:
•
MR50 Industrial Reader with external antenna
Last version date:
March 2009
Manual versions:
Version 1.0: first version
Version 1.1: external antenna added
Version 1.2: FCC approval
Page 2 of 12
MR50 Industrial Reader — Product Manual
v1.2
Table Of Contents
Introduction--------------------------------------------------------------------------------- 4
Regulatory information ----------------------------------------------------------------- 5
2.1
2.2
2.3
3.1
3.2
3.3
3.4
3.5
FCC Information to User------------------------------------------------------------------------------------5
FCC Electronic Emission Notices ------------------------------------------------------------------------5
FCC Radio Frequency Interference statement--------------------------------------------------------5
Installation guide ------------------------------------------------------------------------- 6
Mounting--------------------------------------------------------------------------------------------------------6
External antenna mounting --------------------------------------------------------------------------------6
Power supply --------------------------------------------------------------------------------------------------6
Connections ---------------------------------------------------------------------------------------------------7
Led control -----------------------------------------------------------------------------------------------------7
Appendix A
Reader specifications --------------------------------------------------- 8
Appendix B
External antenna specifications ------------------------------------10
Appendix C
Declaration of Conformity --------------------------------------------11
Page 3 of 12
MR50 Industrial Reader — Product Manual
v1.2
1 Introduction
The MR50 Industrial Reader is a general purpose 13.56 MHz RFID reader. The MR50
Industrial Reader is fully sealed in epoxy to protect the electronics from a harsh environment.
There are no user serviceable parts inside the reader.
The MR50 Industrial Reader communicates via the RS232/EIA-232 interface. The use of this
standard communication interface makes it easy to connect the MR50 Industrial Reader to a
host system. The MR50 Industrial Reader also contains a bi-color LED which can be
hardware-controlled by means of two inputs.
Controlling the MR50 Industrial Reader is done by the T=0 protocol which is not a part of
this manual. For more information about the T=0 protocol we refer to the Inside Contactless
manual M220H.
Remark: the T=0 protocol is a worldwide standardized protocol. Although, it is possible that
Inside Contactless also integrated custom made commands into this T=0 protocol. When T=0
protocol is written in this manual, the Inside Contactless T=0 protocol is meant.
See also: http://www.insidecontactless.com
Attention
This manual describes the MR50 Industrial Reader with external reader.
The MR51 Industrial Reader has the same functionality and specification but comes with an
internal antenna. Ask your dealer for more information.
Page 4 of 12
MR50 Industrial Reader — Product Manual
v1.2
2 Regulatory information
2.1 FCC Information to User
This product does not contain any user serviceable components and is to be used with
approved antennas only. Any product changes or modifications will invalidate all applicable
regulatory certifications and approvals
2.2 FCC Electronic Emission Notices
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause
undesired operation.
2.3 FCC Radio Frequency Interference statement
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
Operation of this equipment in a residential area may cause harmful interference, in which
case the user will be required to correct the interference at his own expense.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
• Consult the dealer or an experienced radio/TV technician for help
Page 5 of 12
MR50 Industrial Reader — Product Manual
v1.2
3 Installation guide
3.1 Mounting
The MR50 Industrial Reader can be mounted on a flat surface with two 4 mm screws.
Metal constructions close to the reader-antenna can absorb energy from the reader excite field
and can detune the antenna. The read range of the internal antenna will therefore be reduced if
the reader-antenna is located on metal surfaces or in close vicinity of metal objects. The
amount of reduction will be a factor of the amount of metal and the distance the readerantenna is from the metal. Please check carefully if metal constructions in your operational
environment allow for enough margin to guarantee proper operation of the reader.
3.2 External antenna mounting
The external antenna can be mounted on a flat surface with five 3 mm screws and five 3 mm
nylon spacers (not supplied). Do not over tighten the screws!
As mentioned in chapter 3.1, the read range of the internal antenna will therefore be reduced
if the reader-antenna is located on metal surfaces or in close vicinity of metal objects.
Note
The trimmer (C5) on the external antenna is factory adjusted; please do not touch this
trimmer.
If the operational situation requires large metal constructions close to the antenna, part of the
detuning can be compensated for by readjusting C5. In that case please contact Dialoc ID for
more instructions.
3.3 Power supply
The recommended power supply for the MR50 Industrial Reader is 13,8Vdc up to 24Vdc.
The maximum power consumption at 13,8Vdc is 120mA.
Page 6 of 12
MR50 Industrial Reader — Product Manual
v1.2
3.4 Connections
The MR50 Industrial Reader has one connector for power connection, serial communication
and led-control. The layout of the connector is as follows:
Pin number
Function
Ground (GND)
TX (transmit data)
RX (receive data)
Led A
Not connected
Not connected
Led B
Power (+13,8 – 24Vdc)
3.5 Led control
The MR50 Industrial Reader has a bi-color LED which can be controlled from the inputs of
the reader. The following table shows how the colors are generated:
Led A
Led B
Color
Remarks
Low
High
Green
High level equals +13,8 – 24Vdc
High
Low
Red
Low level equals GND
High
High
Orange
Page 7 of 12
MR50 Industrial Reader — Product Manual
Appendix A
A.1
Reader specifications
Power
Input voltage
13,8 - 24Vdc +/-5%
Current consumption
max. 120 mA @ 13,8V dc
Power down option
Coupler power down (via software)
Overvoltage protection
No
Polarity protection
Yes
A.2
Connection
Connector type
8 way Wieland PCB connector
Contra part
Supplied
Antenna connection
400 mm lead with a MCX connector
A.3
v1.2
Hardware
Read distance
Up to 15 cm (depending on the type of tag)
Labels
See the Inside Contactless manual M220H for more details
Operating temperature
-20 / +50° C
A.4
In/outputs
Led A and B input voltage
A.5
13,8 - 24V dc (current consumption max. 25 mA @ 24V dc)
Communication interface / protocol
ISO standards
14443 A/B, 15693, FeliCa™
Interface
RS232 / EIA-232
Baud rate
Default 9600 bps (up to 115.2 kbps)
Coupler
M220-G2 of Inside Contactless
Protocol
T=0 of Inside Contactless
A.6
Housing
Type, color
PVC casing, light gray
Waterproof
Front side IP67, back side open connector
Dimensions
see below
Page 8 of 12
MR50 Industrial Reader — Product Manual
Side view
Back view
4mm
8mm
Front view
v1.2
90mm
400 mm lead to
antenna
(MR50 Industrial
Reader only)
MCX connector
4mm
8mm
48mm
127mm
110mm
Bi-color LED
25mm
2mm
50mm
38mm
4 mm mounting holes
(2x)
Page 9 of 12
MR50 Industrial Reader — Product Manual
Appendix B
B.1
v1.2
External antenna specifications
Power
Impedance
50 ohm @ 13.56 MHz
Over voltage protection
No
Polarity protection
No
B.2
Connection
Connector type
B.3
MCX connector
Hardware
Read distance
Up to 15 cm (depending on the type of tag)
Operating temperature
-20 / +50° C
B.4
Antenna housing
Type
Printed circuit board
Waterproof
No
Dimensions
see below
Front view
Side view
Holes (2x) for wire
retention
C5 trimmer
3 mm
mounting hole (5x)
additional 3 mm
nylon spacer (5x)
10mm
69mm
50mm
100mm
90mm
MCX chassis
connector
2mm
10mm
46mm
10mm
50mm
90mm
100mm
Page 10 of 12
MR50 Industrial Reader — Product Manual
Appendix C
v1.2
Declaration of Conformity
Page 11 of 12
MR50 Industrial Reader — Product Manual
v1.2
NOTES
DIALOC ID
DALTONSTRAAT 42-44
3846 BX HARDERWIJK
TEL +31 (0) 341 42 09 40
FAX +31 (0) 341 42 50 33
www.dialocid.com
support-rfid@dialocid.com
Page 12 of 12

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 8.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:03:09 10:17:40+01:00
Create Date                     : 2009:03:09 10:17:40+01:00
Format                          : application/pdf
Title                           : Microsoft Word - MR5x Industrial Reader - Product Manual _v1.2_.doc
Creator                         : Rico
Document ID                     : uuid:61ac170b-bd32-43b2-ba81-afed28bb272a
Instance ID                     : uuid:a70388be-d9ce-45d1-be8a-44968ea48aa4
Page Count                      : 12
Author                          : Rico

EXIF Metadata provided by EXIF.tools