Diasonic Technology Co RVM-704I REARVIEW MONITOR User Manual 1

Diasonic Technology Co Ltd REARVIEW MONITOR 1

USERS MANUAL

http://www.emc2000.co.krFCC TEST REPORTReport No.: EMC-FCC-R0077EMC compliance Ltd.480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea82 31 336 9919 (Main) 82 31 336 4767 (Fax)This test report shall not be reproduced except in full, Without the written approval.Appendix 6.User manual
OWNER'S MANUALR2-DIN, 7"Touch screen vehiclemonitor for allround visionModel : MXN-7DDTDesign and Specifications are subject to change without notice.
2-DIN, 7"Touch screen MonitorModel : MXN-7DDTInstruction Manual (Ver 1.0)Index1. Caution2. Components of the product3. How to use the product4. How to install the product5. SpecificationThank you for purchasing our touchscreen vehicle monitor.Please read this manual before you use the product. The product may be different than described in the manual;depending on renewal and/or upgrade of S/W version andperformance it can be altered without notice.
Caution3For your safe operation, please read this manual before you start to usethe product. We inform you that our company shall not be responsible forfailures and troubles that are occurred due to misuse or neglection of thecautions written on this manual. Operating this equipment when driving a vehicle might cause an accident.Use the equipment after parking or stopping the vehicle in a safe area.When wiping off the dust, use a soft fabric instead of liquid solvents (thinner,benzene etc.) solution or a wet rag.Do not press the liquid crystal screen hard. It might be damaged by hardpressure.Do not drop or give shock. It might cause breakdown or damage.Do not dismantle the product arbitrarily. We do not supply free after servicefor an arbitrarily dismantled product. Touching the power with a wet hand causes electric shock. Cautionrequired.For accessories or cables to connect with the product, it is recommendedto use proper goods from our company. We are not responsible for anyproblems caused by wrong articles.Do not disconnect the power cable during using the product. It mightcause damage to the product.Amplified explanation is as follows.-Caution: This part informs what to keep in mind or understand and what caution is required to use the product.-Ref (reference): Reference is about functional explanation.Caution : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Components of the product42365741123Touch ScreenBy touching one of the small pictures during multi screen mode, the concerning small picturewill be enlarged into Full Screen mode. By touching the screen it is possible to control the equipment or to change the settings.Power On/OffPress the Power button for 0.5 seconds to turn on the screen.Press the Power button for 0.5 seconds to turn off the screen when it is tuned on.illuminance SensorBehind this window a sensor detects the actual light conditions in the area around the screen.When activated via the menu settings, this sensor automatically controls the brightness of thescreen.(Day/Night control)
Components of the product54567Power InputConnect the Power Cable ( VCC/GND/TRIGGER1~TRIGGER5/Speed Switch )Camera InputConnect the Camera Cable ( Cam1 ~ Cam4 )AV In/OutAV IN: AUX1 & AUX2 (RCA), AV Out (RCA)Ext.Speaker output / Mic. inputConnect the external speaker (left side terminal) Connect the optional microphone (right side terminal)Please check that you have the correct contents before using this product.If any items are missing, please contact your dealer.Package ContentsMonitor Trim Bracket Deco Plate A(Dimensions:187.6 x 121.4mm)Sunvisor Deco Plate B(Dimensions:187.6 x 115.4mm)Deco Plate C(Optional)(Dimensions:190.4x 124mm)Cable Bracket(2EA) Power Cable Speaker CableEjection Key(2EA)Instruction Manual Tapping ScrewT2 3X6L (4EA)Tapping ScrewT2 2.3X8L (8EA)
How to use the product6Start ScreenWhen the booting is ready, the multi screen as below will be displayedWhen the small windows on the multi screen are touched, the channel is enlarged into fullscreen mode. One more touch returns it back to the multi screen mode. : Controls volume of the speaker: Settings menu: Run the Bluetooth Phone (Optional function): Change Input signal: Multi screen modeWhen the small window istouched, it is enlarged.
How to use the product7Volume ControlPress the button to display Volume Pop-up.11232 3Press the button to mutePress the button to increase the volumePress the button to decrease the volume
How to use the product8Input selection Press the Input button to change InputPress input buttononce: AUX1Press input button twice: AUX2Press input button3 times: Cam
How to use the product9Multi screenPress multi screenbutton once:Cam1,Cam2Press multi screen button twice: Cam3,Cam4Press multi screenbutton 3 times:Cam1,2,3,41122334411223344Press the multi screen button to divide the screen.
How to use the product10Setting ModePress the setting menu button to open the Setting screen.CAM : Adjust brightness of Camera input screenAUX : Adjust brightness of AUX screen
How to use the product11DisplayInput the name into each channel.Mirror : Mirror image or normal imageUp : Change up and down of the screenShutter : Enable to operate Shutter/Heater Camera
How to use the product12DisplaySetup screen position of each channelSetup the screen on each TriggerMirror : Mirror image or normal imageUp : Change up and down of the screenShutter : Enable to operate Shutter/Heater CameraCaution: Cam1and AUX1 cannot be setup at the same time. Cam2 and AUX2 cannot be setup at the same time.The screen will be showed screen by each Trigger set if inputTrigger.
How to use the product13DisplayDisplay the full screen according to each channelsetup when setting up On Display the dividing lines of the screen
How to use the product14DisplayAdjust Parking line of each TriggerTrig.1Calibration Front & Rear
How to use the product15FunctionThe screen is turned ON automaticallywhen starting the vehicleSensitivity of automatic brightness adjustment, level 0 to 10 controlledby actual light conditions (Day/Night)Automatic brightness adjustment by sensorin the front housing
How to use the product16FunctionKeep Trigger activated during setup time after Trigger offin order to bridge temporary powerloss, e.g. from vehicle'sturnlight signalRe-adjust center Point of Touch panelSTEP 1 of 3Click on center of '+' iconfor Touch screen calibration.
How to use the product17FunctionDetect speed of a vehicle from 10 to 200 Hz To switch automatically into the screen ON mode,by detecting a speed signal (tacho signal)
How to use the product18SystemSet time displaying the Menu screen Set time displayed on the screenThe screen is turned off when there is no input like touching it or so duringsetting up time
How to use the product19SystemSet a password to lock the Menu buttonSupport languages for each country ( Option )
How to use the product20SystemInitializing set points of Menu Display Firmware Version and Model name
How to use the product21Start-up screen displays the Phone Book list of the phone paired: Displays call lists during absence: Displays phone call lists received: Displays phone call lists sent: Use for making a call dialing numbers: Displays a Phonebook list: Setup of Bluetooth: Finishes BluetoothBluetooth Phone (Optional) Press the button to start BluetoothScreen of Bluetooth start
How to use the product22Bluetooth Phone (Optional) Enter the Paring Mode for Paring with Bluetooth by pressing the button1. Pairing mode is set by pressing the button.2. Connect Bluetooth to a cell phone you want searching Bluetooth device. (Enter the Pin code depending on type of cell phones)3. Message is displayed when it is connected as below.4. Return to the start-up screen of Bluetooth by pressing the button.
How to use the product23Bluetooth Phone (Optional) : Displays devices Paired. Displays devices paired up to 8 devicesDisplays devices pairedDeletes devices connected by the buttonConnects devices by pressing the buttonDeletes all devices by pressing the button( Devices paired are connected automatically in order )
How to use the product24Bluetooth Phone (Optional) Down load phonebook list after pairing succeed.Call after press the number in the list.
Installation25Pre-InstallationPlease make sure to disassemble the monitor and trim bracket before installation.1. Insert the ejection keys into the monitor along the guides on either sides.2. Pull the monitor out from the trim bracket.
Installation26InstallationInstallation Overview13512Deco Plate + Trim Bracket Sunvisor4Power Cable, Cable Bracket, CamerasMonitorDeco PlateTrim BracketDash Board
Installation27Installation2Trim Bracket Dash Board a. Insert trim bracket into dash board. b. Fix trim bracket firmly with the supplied screw. ( top and bottom ) c. Bend the taps. ( right and left )3Sunvisor + MonitorTrim Bracket + Dash BoardTrim Bracket + Screwabc
Installation28Installation4Power Cable, Cable Bracket, Cameras5Monitor + Trim BracketMonitor + Cable Bracket Monitor + ScrewPlease make a connection for power cable, camera cables,cable bracket before installation of monitor and trim bracket.
Installation29Disassemble1Total Ass'y - Sunvisor2Total Ass'y - Ejection KeyPlease disassemble the unit in reverse of installation.
Installation30System Connection1 2 3 412345678VIDEOVIDEO IN/OUTREDGREENBLUEBROWNBLACKWHITEYELLOWORANGEPower ( 12~30V DC, via ignition )Trigger1 ( 9~30V DC, via direction light, etc. )Trigger3 ( 9~30V DC, via direction light, etc. )Trigger5 ( 9~30V DC, via direction light, etc. )GroundTrigger2 ( 9~30V DC, via direction light, etc. )Trigger4 ( 9~30V DC, via direction light, etc. )Speed Pulse ( via tachograph, 10 ~ 200 Hz )AUDIO IN/OUTCAMERA1EXT.Speaker୔Power Cable ( 2M·100mm )EXT.MICCAMERA2CAMERA3CAMERA4AUDIO152346781B3 RED(CAM AUDIO)B2 BLUE(CAM+9V)B4 YEL(CAM VCC)B1 WHT(CAM VIDEO)B5 GND(SHX2)No Wire Color Label2345678
Specification31LCD : Built in 7˟ TFT LCD (WVGA 800x480, with Touch Panel)Camera : 4Ch input (1 Vp-p, 75˟) /NTSC, PAL ( Video & Audio )Video Output : CVBS 1 Ch. (1 Vp-p, 75˟) /NTSC, PALAudio Output 1Ch (RCA) External speaker Output ( +,- 2pin / Max 3.1V @ 8 Ohm Speaker )Video input : AUX1, AUX2 ( RCA )5 Trigger inputs (Cable Input : 12 ~ 24V)ALS Sensor (Night & Daytime Brightness detection)Power : 12~30Vdc (12Vdc 1.3A)Operating Temp. : -20୅ ~ 60୅Storage Temp. : -30୅ ~ 85୅Dimensions (W x H x D) : 178mm x 110mm x 44.6mmWeight : appx. 640g

Navigation menu