Diasonic Technology Co RVM-704I REARVIEW MONITOR User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	1825037
Application ID	SWjvz/vGuv/8LBSB1lD0cg==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	127.59kB (1594878 bits)
Date Submitted	2012-10-29 00:00:00
Date Available	2012-10-29 00:00:00
Creation Date	2012-09-26 10:22:21
Producing Software	Gaaiho PDF
Document Lastmod	2012-09-28 10:53:28
Document Title	Microsoft Word - 문서1
Document Creator	Microsoft Word - 문서1
Document Author:	Dell

FCC TEST REPORT
Report No.: EMC-FCC-R0077
http://www.emc2000.co.kr
Appendix 6.
User manual
EMC compliance Ltd.
480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea
82 31 336 9919 (Main) 82 31 336 4767 (Fax)
This test report shall not be reproduced except in full, Without the written approval.
R
OWNER'S MANUAL
2-DIN, 7"Touch screen vehicle
monitor for allround vision
Model : MXN-7DDT
Design and Specifications are subject to change without notice.
2-DIN, 7"Touch screen Monitor
Model : MXN-7DDT
Instruction Manual (Ver 1.0)
Index
1. Caution
2. Components of the product
3. How to use the product
4. How to install the product
5. Specification
Thank you for purchasing our touchscreen vehicle monitor.
Please read this manual before you use the product.
The product may be different than described in the manual;
depending on renewal and/or upgrade of S/W version and
performance it can be altered without notice.
Caution
For your safe operation, please read this manual before you start to use
the product. We inform you that our company shall not be responsible for
failures and troubles that are occurred due to misuse or neglection of the
cautions written on this manual.
Operating this equipment when driving a vehicle might cause an accident.
Use the equipment after parking or stopping the vehicle in a safe area.
When wiping off the dust, use a soft fabric instead of liquid solvents (thinner,
benzene etc.) solution or a wet rag.
Do not press the liquid crystal screen hard. It might be damaged by hard
pressure.
Do not drop or give shock. It might cause breakdown or damage.
Do not dismantle the product arbitrarily. We do not supply free after service
for an arbitrarily dismantled product.
Touching the power with a wet hand causes electric shock. Caution
required.
For accessories or cables to connect with the product, it is recommended
to use proper goods from our company. We are not responsible for any
problems caused by wrong articles.
Do not disconnect the power cable during using the product. It might
cause damage to the product.
Amplified explanation is as follows.
-Caution: This part informs what to keep in mind or understand and what
caution is required to use the product.
-Ref (reference): Reference is about functional explanation.
Caution : Any changes or modifications in construction of this device
which are not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Components of the product
1 Touch Screen
By touching one of the small pictures during multi screen mode, the concerning small picture
will be enlarged into Full Screen mode.
By touching the screen it is possible to control the equipment or to change the settings.
2 Power On/Off
Press the Power button for 0.5 seconds to turn on the screen.
Press the Power button for 0.5 seconds to turn off the screen when it is tuned on.
3 illuminance Sensor
Behind this window a sensor detects the actual light conditions in the area around the screen.
When activated via the menu settings, this sensor automatically controls the brightness of the
screen.(Day/Night control)
Components of the product
4 Power Input
Connect the Power Cable ( VCC/GND/TRIGGER1~TRIGGER5/Speed Switch )
5 Camera Input
Connect the Camera Cable ( Cam1 ~ Cam4 )
6 AV In/Out
AV IN: AUX1 & AUX2 (RCA), AV Out (RCA)
7 Ext.Speaker output / Mic. input
Connect the external speaker (left side terminal)
Connect the optional microphone (right side terminal)
Package Contents
Please check that you have the correct contents before using this product.
If any items are missing, please contact your dealer.
Monitor
Trim Bracket
Deco Plate A
(Dimensions:187.6 x 121.4mm)
Sunvisor
Deco Plate B
(Dimensions:187.6 x 115.4mm)
Deco Plate C(Optional)
(Dimensions:190.4x 124mm)
Cable Bracket(2EA)
Instruction Manual
Power Cable
Ejection Key(2EA)
Speaker Cable
Tapping Screw
T2 3X6L (4EA)
Tapping Screw
T2 2.3X8L (8EA)
How to use the product
Start Screen
When the booting is ready, the multi screen as below will be displayed
When the small window is
touched, it is enlarged.
When the small windows on the multi screen are touched, the channel is enlarged into full
screen mode. One more touch returns it back to the multi screen mode.
: Controls volume of the speaker
: Settings menu
: Run the Bluetooth Phone (Optional function)
: Change Input signal
: Multi screen mode
How to use the product
Volume Control
Press the button to display Volume Pop-up.
1 Press the button to mute
2 Press the button to increase the volume
3 Press the button to decrease the volume
How to use the product
Input selection
Press the Input button to change Input
Press input button
3 times: Cam
Press input button
once: AUX1
Press input button twice: AUX2
How to use the product
Multi screen
Press the multi screen button to divide the screen.
Press multi screen
button once:
Cam1,Cam2
Press multi screen
button 3 times:
Cam1,2,3,4
Press multi screen button twice: Cam3,Cam4
How to use the product
Setting Mode
Press the setting menu button to open the Setting screen.
CAM : Adjust brightness of Camera input screen
AUX : Adjust brightness of AUX screen
10
How to use the product
Display
Input the name into each channel.
Mirror : Mirror image or normal image
Up : Change up and down of the screen
Shutter : Enable to operate Shutter/Heater Camera
11
How to use the product
Display
Setup screen position of each channel
Caution: Cam1and AUX1 cannot be setup at the same time.
Cam2 and AUX2 cannot be setup at the same time.
Setup the screen on each Trigger
Mirror : Mirror image or normal image
Up : Change up and down of the screen
Shutter : Enable to operate Shutter/Heater Camera
The screen will be showed screen by each Trigger set if input
Trigger.
12
How to use the product
Display
Display the full screen according to each channel
setup when setting up On
Display the dividing lines of the screen
13
How to use the product
Display
Adjust Parking line of each Trigger
Calibration
Front & Rear
Trig.1
14
How to use the product
Function
The screen is turned ON automatically
when starting the vehicle
Automatic brightness adjustment by sensor
in the front housing
Sensitivity of automatic brightness adjustment, level 0 to 10 controlled
by actual light conditions (Day/Night)
15
How to use the product
Function
Keep Trigger activated during setup time after Trigger off
in order to bridge temporary powerloss, e.g. from vehicle's
turnlight signal
Re-adjust center Point of Touch panel
STEP 1 of 3
Click on center of '+' icon
for Touch screen calibration.
16
How to use the product
Function
Detect speed of a vehicle from 10 to 200 Hz
To switch automatically into the screen ON mode,
by detecting a speed signal (tacho signal)
17
How to use the product
System
Set time displaying the Menu screen
Set time displayed on the screen
The screen is turned off when there is no input like touching it or so during
setting up time
18
How to use the product
System
Set a password to lock the Menu button
Support languages for each country ( Option )
19
How to use the product
System
Initializing set points of Menu
Display Firmware Version and Model name
20
How to use the product
Bluetooth Phone (Optional)
Press the button to start Bluetooth
Screen of Bluetooth start
Start-up screen displays the Phone Book list of the phone paired
: Displays call lists during absence
: Displays phone call lists received
: Displays phone call lists sent
: Use for making a call dialing numbers
: Displays a Phonebook list
: Setup of Bluetooth
: Finishes Bluetooth
21
How to use the product
Bluetooth Phone (Optional)
Enter the Paring Mode for Paring with Bluetooth by pressing the
1. Pairing mode is set by pressing the
button
button.
2. Connect Bluetooth to a cell phone you want searching Bluetooth device.
(Enter the Pin code depending on type of cell phones)
3. Message is displayed when it is connected as below.
4. Return to the start-up screen of Bluetooth by pressing the
22
button.
How to use the product
Bluetooth Phone (Optional)
: Displays devices Paired.
Displays devices paired up to 8 devices
Displays devices paired
Deletes devices connected by the
button
Connects devices by pressing the
button
Deletes all devices by pressing the
button
( Devices paired are connected automatically in order )
23
How to use the product
Bluetooth Phone (Optional)
Down load phonebook list after pairing succeed.
Call after press the number in the list.
24
Installation
Pre-Installation
Please make sure to disassemble the monitor and trim bracket before installation.
1. Insert the ejection keys into the monitor along the guides on either sides.
2. Pull the monitor out from the trim bracket.
25
Installation
Installation
Dash Board
Trim Bracket
Deco Plate
Monitor
Sunvisor
4 Power Cable, Cable Bracket, Cameras
Installation Overview
1 Deco Plate + Trim Bracket
26
Installation
Installation
2 Trim Bracket
Dash Board
a. Insert trim bracket into dash board.
b. Fix trim bracket firmly with the supplied screw. ( top and bottom )
c. Bend the taps. ( right and left )
Trim Bracket + Dash Board
Trim Bracket + Screw
3 Sunvisor + Monitor
27
Installation
Installation
4 Power Cable, Cable Bracket, Cameras
Monitor + Cable Bracket
Monitor + Screw
Please make a connection for power cable, camera cables,
cable bracket before installation of monitor and trim bracket.
5 Monitor + Trim Bracket
28
Installation
Disassemble
Please disassemble the unit in reverse of installation.
1 Total Ass'y - Sunvisor
2 Total Ass'y - Ejection Key
29
Installation
System Connection
EXT.Speaker EXT.MIC
VIDEO
AUDIO
B3 RED
(CAM AUDIO)
CAMERA4
CAMERA3
CAMERA2
CAMERA1
AUDIO IN/OUT
VIDEO IN/OUT
B2 BLUE
(CAM+9V)
B4 YEL
(CAM VCC)
B1 WHT
(CAM VIDEO)
B5 GND
(SHX2)
୔Power Cable ( 2M·100mm )
No
Wire Color
Label
RED
Power ( 12~30V DC, via ignition )
GREEN
Trigger1 ( 9~30V DC, via direction light, etc. )
BLUE
Trigger3 ( 9~30V DC, via direction light, etc. )
BROWN
Trigger5 ( 9~30V DC, via direction light, etc. )
BLACK
Ground
WHITE
Trigger2 ( 9~30V DC, via direction light, etc. )
YELLOW
Trigger4 ( 9~30V DC, via direction light, etc. )
ORANGE
Speed Pulse ( via tachograph, 10 ~ 200 Hz )
30
Specification
LCD : Built in 7˟ TFT LCD (WVGA 800x480, with Touch Panel)
Camera : 4Ch input (1 Vp-p, 75˟) /NTSC, PAL ( Video & Audio )
Video Output : CVBS 1 Ch. (1 Vp-p, 75˟) /NTSC, PAL
Audio Output 1Ch (RCA)
External speaker Output ( +,- 2pin / Max 3.1V @ 8 Ohm Speaker )
Video input : AUX1, AUX2 ( RCA )
5 Trigger inputs (Cable Input : 12 ~ 24V)
ALS Sensor (Night & Daytime Brightness detection)
Power : 12~30Vdc (12Vdc 1.3A)
Operating Temp. : -20୅ ~ 60୅
Storage Temp. : -30୅ ~ 85୅
Dimensions (W x H x D) : 178mm x 110mm x 44.6mm
Weight : appx. 640g
31

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Page Mode                       : UseNone
XMP Toolkit                     : 3.1-702
Producer                        : Gaaiho PDF
Creator Tool                    : Microsoft Word - 문서1
Create Date                     : 2012:09:26 10:22:21+09:00
Modify Date                     : 2012:09:28 10:53:28+09:00
Metadata Date                   : 2012:09:28 10:53:28+09:00
Format                          : application/pdf
Title                           : Microsoft Word - 문서1
Creator                         : Dell
Document ID                     : uuid:0511be67-96e0-4876-8e64-f810c96fc791
Instance ID                     : uuid:4a1f7564-958a-4007-b7eb-8546fcce9b27
Has XFA                         : No
Page Count                      : 32
Author                          : Dell

EXIF Metadata provided by EXIF.tools