Digital Device LL500H 15 inch LCD Monitor User Manual UserManual
Digital Device Inc. 15 inch LCD Monitor UserManual
users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 161439 |
| Application ID | +ejMnZPd4Weez1CWjCZhzA== |
| Document Description | users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 3.06kB (38297 bits) |
| Date Submitted | 2001-07-25 00:00:00 |
| Date Available | 2001-07-24 00:00:00 |
| Creation Date | 0000-00-00 00:00:00 |
| Producing Software | Acrobat PDFWriter 3.0 for Windows |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | UserManual.PDF |
| Document Creator | Microsoft Word |
| Document Author: | sgkim |
User’s Manual 1.Setup for Operation Once the circuit has been connected, a setup procedure for optimal operation is required some time. The following instructions are likely to form the basis of the finished product operation manual. PC Settings The PC needs to be set to an appropriate graphics mode that has the same resolution with the LCD panel to have clear screen image. And the vertical refresh rate should be set to one of 56-75Hz, non-interlaced. LCD Display System Settings The OSD(On Screen Display) provides certain functions to have clear image and others. This board supports 4 buttons OSD operation as a standard. The control functions defined on OSD operation are as below. 1) Functions on OSD Menu OSD Menu Descriptions Auto Adjustment Auto Geometry & Auto Color Balance Auto Geometry Auto Color Balance Automatically adjust the Horizontal position, Vertical position, Horizontal size, and Phase. In order to have good Auto Adjustment operation, You would better have full screen Window’s background or characters on the screen prior to proceeding this function. Auto adjust the color balance of the screen Horizontal Position Adjust the horizontal position of the screen’s image. Vertical Position Adjust the Vertical position of the screen’s image. Horizontal Size Adjust the horizontal size of the screen’s image. Phase Adjust the focus of the screen’s image. Brightness Adjust the brightness of the screen. Contrast Color Adjust the contrast of the screen. Temperature, Red, Green & Blue Language Select one of the five language(English, French, German, Italian, Spanish) Advanced Factory Preset, Sharpness, DOS/GFX, OSD Horizontal / Vertical Position Cancel Ignore current changes and keep the pervious data. Digital Device, Inc. 2) Hotkey Function Definition OSD KEY Functions DOWN Brightness control UP Contrast control SEL Auto Geometry Adjustment 2.Applicable Graphic Mode The microprocessor measure the H-sync, V-sync and V-sync/H-sync polarity for RGB inputs, and uses this timing information to control all of the display operation to get the proper image on a screen. This board can detect all VESA standard Graphic modes shown on the table below and provide more clear and stable image on a screen. Spec Pixel Freq. Mode Horizontal Timing Sync Polar MHz Vertical Timing Freq Total Active KHz Pixel Pixel Sync Polar Freq Total Active Hz Line Line 640x350 @70Hz 25.144 31.430 800 640 70.000 449 350 640x480 @70Hz 28.287 31.430 800 640 70.000 449 400 720x400 @70Hz 28.287 31.430 900 720 70.000 449 400 640x480 @60Hz 25.175 31.469 800 640 59.940 525 480 640x480 @72Hz 31.500 37.861 832 640 72.809 520 480 640x480 @75 31.500 37.500 840 640 75.000 500 480 800x600 @56Hz 36.000 35.156 1024 800 56.250 625 600 800x600 @60Hz 40.000 37.879 1056 800 60.317 628 600 800x600 @72Hz 50.000 48.077 1040 800 72.188 666 600 800x600 @75Hz 1024x768 @60Hz 49.500 46.875 1056 800 75.000 625 600 65.000 48.363 1344 1024 60.005 806 768 1024x768 @70Hz 75.000 56.476 1328 1024 70.070 806 768 1024x768 @75Hz 78.750 60.023 1312 1024 75.030 800 768 Digital Device, Inc. FCC RF INTERFERENCE STATEMENT NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio, TV technical for help. Only shielded interface cable should be used. Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacturer could void the users authority to operate such equipment. Digital Device, Inc. HQ/R&D: 4th FL, Hanhwa B/D 78-1 Karakbondong Songpagu Seoul, Korea Tel 82-2-431-8581 Fax 82-2-431-8472 Factory : 1358, Jangwon Industrial Zone juksanmyun Ansungsi Kyonggi, Korea Tel 82-31-675-8471 Fax 82-31-675-8461 Digital Device, Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 3 Creator : Microsoft Word Create Date : Monday, June 25, 2001 10:20:12 PM Title : UserManual.PDF Author : sgkim Producer : Acrobat PDFWriter 3.0 for Windows Subject :EXIF Metadata provided by EXIF.tools