Formula TRE 04 041
User Manual: Formula TRE
Open the PDF directly: View PDF 
.
Page Count: 204
| Download | |
| Open PDF In Browser | View PDF |
Parts Catalog Issued: Feb 19, 2018 Formula™ TRE Powered Seating TDX® Power Wheelchairs Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service parts for Form No. 04-041. If you have any questions regarding this catalog, please contact one of our Customer Service Representatives. For Customer Service Support Call: 1-800-333-6900 For Faxed In Orders Call: 1-800-678-4682 or 1-440-366-0709 For Technical Service Call: 1-800-832-4707 Literature Can Be Found at: www.invacare.com or 1-800-828-6272 SYMBOL DEFINITION Throughout this catalog you will notice letters to draw your attention to specific footnotes which are located at the bottom of the page or below specified charts. Examples: A,B,C etc. = NOTE: = NLA = Special Comments General information pertaining to that specific page No Longer Available HARDWARE MEASUREMENTS The measurements for the hardware will be listed as follows: Screws, Bolts Diameter X Thread Count/Pitch X Length Washers Inside Diameter X Outside Diameter X Thickness Spacers Inside Diameter X Outside Diameter X Length For your convenience, we have supplied an area for you to list your Invacare Representatives. Name Phone Numbers © 2018 Invacare Corporation. Elyria, Ohio. Invacare, Yes, you can., the Blue Medallion Design, SureStep, Storm Series, TDX are registered trademarks and Formula, Contoura, Personal Back 10, DualFlex, MKIV, MK5, EX, and TCD are trademarks of Invacare Corporation. Otto Bock is a registered trademark owned by Otto Bock Orthopaedische Industrie GMBH & Co.. JAY Back is a registered trademark of Sunrise Medical HHG, Inc. Corporation. 1 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com TABLE of CONTENTS Page Number Description A: READ THIS FIRST (THIS CATALOG IS DIFFERENT!) ...................................................... 7 Accessories - Arm Pads - Otto Bock ........................................................................................ 154 Accessories - Back Cane Push Handle Attachments - Contoura Seating ............................... 158 Accessories - Back Cane Push Handle Attachments - Conventional Tilt & Tilt w/ BPO Option 156 Accessories - Headrest Support Assembly - Matrx Elan MEHSP-10,14 .................................. 164 Accessories - Headrest Support Assembly - Stealth CP175/CP275/CP180/CP280 ................ 162 Accessories - Headrest Supports - Tarsys ............................................................................... 160 Accessories - Lateral Supports - Stealth - Contoura Seating TWB-CPR/TWB-CPRL ............. 175 Accessories - Lateral Supports - Stealth - Conventional Recline - T/R & Recline w/ BPO Option TWB-TPR/TWB-TPRL 171 Accessories - Lateral Supports - Stealth - Conventional Tilt & Tilt w/ BPO Option TWB-RPR/TWB-RPRL 168 Accessories - Lateral Supports - Tarsys - Contoura Seating CSLM/CSLL .............................. 172 Accessories - Lateral Supports - Tarsys - Conventional Recline - T/R & Recline w/ BPO Option TMSLM/TMSLL 169 Accessories - Lateral Supports - Tarsys - Conventional Tilt & Tilt w/ BPO Option TMSLM/TMSLL 165 Accessories - Miscellaneous .................................................................................................... 202 Accessories - Personal Back10 (TALL Regular/TALL Plus) Mtg. Hdwr. - Conventional Recline w/ BPO Option 198 Accessories - Power Wheelchair Tool Kit ................................................................................ 200 Accessories - Seat & Chest Positioning Strap Mounting Hardware ......................................... 196 Accessories - Seat & Chest Positioning Straps without Mounting Hardware ........................... 194 Accessories - Vent Tray Assembly without Mounting Hardware .............................................. 186 Accessories - Vent Tray Kits .................................................................................................... 177 Accessories - Vent Tray Mounting Hardware - Conventional & Contoura Recline Only .......... 190 2 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com TABLE of CONTENTS Page Number Description Accessories - Vent Tray Mounting Hardware - Conventional Tilt & BPO Option ..................... 188 Accessories - Vent Tray Mounting Hdwr. - Conventional Tilt/Recline - (Contoura Tilt & T/R) & All T/R w/ BPO Option 192 Actuator Module - Elevate Integrated (EIAM) - For Elevate Actuator Motor w/ MK6i Electronics 57 Actuator Module - Recline Integrated Actuator Module (RIAM) For Recline & Tilt/Recline ...... 59 Actuator Motor - Elevate & Mounting Hardware ....................................................................... 55 Actuator Motor - Recline & Mounting Hardware ....................................................................... 53 Actuator Motor - Tilt & Mounting Hardware .............................................................................. 51 Arms - Mounting Hardware - Conventional & Contoura - Recline & Tilt/Recline Seating ........ 135 Arms - Mounting Hardware - Conventional & Contoura Tilt Seating ........................................ 138 Arms - Mounting Swingaway Hardware - Elevate Only For ASBA/ADJASBA Seating ............ 131 Arms - Mtg. Front/Rear Arm Socket Asbly. & Hdwr. - Elevate Only For ADJASBA Seat (16" 22" W) (After 7/4/05) 133 Arms - w/o Mounting Hardware - Adjustable Height - Elevate Only or Tilt Seating .................. 126 Arms - w/o Mounting Hardware - Fixed Height - Elevate Only or Tilt Seating .......................... 122 Arms - w/o Mounting Hardware - Recline & Tilt/Recline .......................................................... 129 Backs - Contoura without Mounting Hardware - Before 5/15/09 .............................................. 74 Backs - Conventional without Mounting Hardware ................................................................... 69 Backs - Curve Contoura without Mounting Hardware - After 5/14/09 ...................................... 78 Backs - Mounting Hardware - Contoura - ADJASBA Only - Before 5/15/09 ............................ 89 Backs - Mounting Hardware - Contoura Recline & Tilt/Recline - Before 5/15/09 ..................... 91 Backs - Mounting Hardware - Contoura Tilt - Before 5/15/09 .................................................. 87 Backs - Mounting Hardware - Conventional Recline & Tilt/Recline - Before 5/15/09 ............... 85 3 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com TABLE of CONTENTS Page Number Description Backs - Mounting Hardware - Conventional Tilt - Before 5/15/09 ............................................ 83 Backs - Mounting Hardware - Curve Contoura - After 5/14/09 ................................................. 93 Backs - Prop Rod Assembly - Contoura Tilt ............................................................................. 95 Backs - Recline Shear Link Assemblies ................................................................................... 97 Battery Box Hdwr. - Door Asbly. - Elevate Actuator Motor - Elevate For ASBA/ADJASBA Conv. & Contoura Seating 18 Battery Box Hdwr. & Door Asbly. - Non-Elevate Conv. & Contoura Seating ............................ 15 Battery Support Bracket Assembly TRBKTS Option ................................................................ 20 Battery Tray Asbly. & Wire Harnesses For Vent Tray (3) 22NF Batteries ................................ 22 Battery Wire Harnesses - Sensor Proximity Switch - Extension Cables & Energy Chain - All Elevate Systems 24 Canes - Back - Back Frame - Slide Blocks & Sleeves - Contoura Seating .............................. 111 Canes - Back - Slide Blocks & Sleeves - Conventional Recline - BPO Recline & Tilt/Recline . 109 Canes - Back - Solid Straight w/o Push Handle & Mtg. Hdwr. - Conventional Tilt & Tilt w/ BPO Option 107 Canes - Back - Spreader Bars & Hdwr. (16" - 22" W) - Elevate Only For ASBA Seating (Before 7/5/05) 99 Canes - Back & Spreader Bars (16" - 22" W) - Elevate Only For ADJASBA Seating (After 7/4/05) 102 Canes - Back Att. Hdwr. (16" - 22" W) Elevate Only For ADJASBA Seating (After 7/4/05) ..... 105 Cushions - Seat - Contoura Seating ......................................................................................... 64 Electronics - MK5 ~PLEASE READ THIS FIRST~ .................................................................. 152 Electronics - MK6i ~PLEASE READ THIS PAGE~ .................................................................. 151 Frame - Tilt & Mounting Hardware ........................................................................................... 47 Frame Finishes - Touch-Up Paints & Upholstery Options ........................................................ 8 Frames - Seat & Hardware (16" - 22" W) - Elevate Only For ASBA Seating (Before 7/5/05) .. 27 4 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com TABLE of CONTENTS Page Number Description Frames - Seat & Seat Pan w/ Hdwr. (16" - 20" W x 16" - 22" D Conventional) & (16", 18", 20" W x 16" - 22" D Contoura) Stg. 33 Frames - Seat & Seat Pan w/ Hdwr. (16" - 20" W x 16" - 22" D) - Elevate Only For ADJASBA Seating (After 7/4/05) 29 Frames - Seat & Seat Pan w/ Hdwr. (20" - 22" W x 16" - 22" D) - Elevate Only For ADJASBA Seating (After 7/4/05) 31 Frames - Seat & Seat Pan w/ Hdwr. (20" - 24" W x 16" - 22" D Conventional) & (20", 22", 24" W x 16" - 22" D Contoura) Stg. 35 Frames - Seat Mounting Hardware - Elevate Only For ADJASBA Seating (After 7/4/05) ........ 39 Frames - Seat Mounting Hardware - Elevate Only For ADJASBA Seating with TRBKTS Option 41 Frames - Seat Mounting Hardware - Elevate Only For ASBA Seating (Before 7/5/05) ........... 37 Frames - Seat Mounting Hardware - Recline Only For Conventional & Contoura Seating ...... 43 Frames - Seat Mounting Hardware - Tilt or Tilt/Recline For Conventional & Contoura Seating 45 Front Riggings ~PLEASE READ THIS FIRST~ ....................................................................... 153 Label Locations For TRBKTS Option ....................................................................................... 12 Packaging & Literature ............................................................................................................. 10 RETROFIT KITS FOR FORMULA TRE POWERED SEATING ............................................... 14 Seat Pans & Mounting Hardware - Elevate Only For ASBA Seating (Before 7/5/05) .............. 61 Shroud Cover - Conventional Seating ...................................................................................... 142 Shroud Cover - Conventional Tilt, Tilt w/ BPO or Tilt-Elevate w/ MK6i Electronics (After 2/28/07) 147 Shroud Covers - Contoura Seating .......................................................................................... 140 Shroud Covers - Conventional Tilt, Tilt w/ BPO or Tilt-Elevate w/ MK6i Electronics (Before 3/1/07) 144 Shroud Covers - Recline & Tilt/Recline Conventional or Contoura Seating w/ MK6i Electronics 149 Spreader Bar Assembly - Contoura Tilt - Recline & Tilt/Recline .............................................. 117 Spreader Bar Assembly - Conventional Recline & Tilt/Recline ................................................ 119 5 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com TABLE of CONTENTS Page Number Description Spreader Bar Assembly - Conventional Tilt w/o Vent .............................................................. 115 Spreader Bar Assembly - Double For Conventional Tilt w/ Vent & Tilt w/ BPO Option ............ 113 Spring - Seat Frame Balance & Tilt Spring Assist Assemblies For Tilt & Tilt/Recline .............. 49 TRBKTS Option Clarification Reference .................................................................................. 13 Upholstery - Back Nylon - Elevate Only For ASBA/ADJASBA Seating .................................... 67 6 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com A: READ THIS FIRST (THIS CATALOG IS DIFFERENT!) 7 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Frame Finishes, Touch-Up Paints and Upholstery Options Frame Finishes and Touch-Up Paint Color Number 08P 17P 22P 24P 33P 34P 61P 62P 66P 69P 71P 84P 101P 102P 104P 105P 115P 116P 117P 118P 119P 120P 121P 122P 123P 124P 125P 126P 127P Part Number 1031456-NLA 1046319-NLA 1033376-NLA 1031450-NLA 1031455-NLA 1046327-NLA 1046321-NLA 1046320-NLA 1046322-NLA 1101320-NLA N/A 1073896-NLA 1101325-NLA 1101327-NLA 1101316-NLA 1101326-NLA N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Bottle Size .6 oz. .6 oz. .6 oz. .6 oz. .6 oz. .6 oz. .6 oz. .6 oz. .6 oz. .6 oz. N/A .6 oz. .6 oz. .6 oz. .6 oz. .6 oz. N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 8 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Frame Finish Deep Purple Cobalt Blue Anthracite Wet Black Red Flat Black Electric Red Electric Blue Electric Purple Teflon Black Silver Vein Lavender Jeweled Green Denim Blue Electric Teal MIdnight Blue Black Prism Sunkissed Orange Tangerine Red Fruit Fusion Bubblegum Pink Grape Madness Lolly Pop Blue Cosmic Blue Celestial Purple Vivid Violet Emerald Green Shamrock Green Grasshopper Green Frame Finishes, Touch-Up Paints and Upholstery Options Sparkle Frame Finishes Color Number 88P Frame Finish Wet Black with Twilight Sparkle Upholstery Options For A.S.B.A. Seating Nylon Color U240 Black 9 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Packaging and Literature 10 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Packaging and Literature Item Number Note 1 2 3 4 5 6 7 8 C A A A,B NOTE: Quantity Per Part Number 1036028 40131X161 40131X011 1015592 1043198-NLA 1012001-NLA 1036027 1129590-NLA 00077X031-NLA 1114809-NLA 1122170-NLA Description Package Assembly Carton, Cover Insert, Plain Pad Carton, Front Riggings Bag, Poly (72" L x 35" W x 19" D) NLA - Tube, Paper NLA - Carton, Joystick Carton, Tray Carton, Corner Reinforcement NLA - Warranty Card NLA - Owner's Manual, TDX w/ MK5 Electronics NLA - Owner's Manual, Formula TRE w/ MK6i Electronics 1 1 1 1 1 1 1 1 1 1 1 A - Not Shown B - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. C - Order part #40131X011 to use as a replacement Joystick Carton also. When adjusting or replacing parts, please refer to your Owner's Manual for assistance. 11 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 2 1 1 1 1 2 4 1 1 1 Label Locations For TRBKTS Option 12 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com TRBKTS Option Clarification Reference TRBKTS Option was introduced 12/19/05 as an On-Chair option only. 13 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com RETROFIT KITS FOR FORMULA TRE POWERED SEATING 14 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Battery Box Hardware and Door Assembly Non-Elevate For Formula Conventional and Contoura Seating The Battery Boxes are non-serviceable parts in the field. Wheelchair must be returned to Invacare for repair. Call Technical Services for assistance (1-800-832-4707) 15 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Battery Box Hardware and Door Assembly Non-Elevate For Formula Conventional and Contoura Seating The Battery Boxes are non-serviceable parts in the field. Wheelchair must be returned to Invacare for repair. Call Technical Services for assistance (1-800-832-4707) Item Number Note Quantity Per 1 2 3 4 5 E F E Part Number 1128731 1124725 1125639 1124668-NLA 1128729-NLA 5 E 1128730 6 A 1125738 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 15 16 18 19 20 21 22 15 B,D,G 1113357 B,D 1113127-NLA C,D 1121072-NLA 16 17 18 19 20 Description Package Assembly Bracket, Frame Stiffener, Black Shroud, Battery Box Isolation Block, Side Support NLA - Shroud, Front Battery Box NLA - Bracket, Seat Frame Mounting, Black LOW 0° = 18" STF; 5° = (19-3/4" STF For 16-19" Deep) or (21-1/4" STF For 20-22" Deep) Bracket, Seat Frame Mounting, Black TALL 0° = 19-1/4" STF; 5° = (21" STF For 16-19" Deep) or (21-1/4" STF For 20-22" Deep) NLA - Kit, Non-Elevate Battery Box Assembly Hardware Tie Wrap (5-5/8" L) Locknut (5/16-18) Washer, Steel (5/16 x 3/4 x 1/16") Bolt, Hex Head Cap (1/4-20 x 3/4") Washer (1/4 x 1/2 x 1/16") NLA - Screw, Hex Head w/ Patch (5/16-18 x 7/8") Locknut (1/4-20) Screw, Phillips Pan Head Tap (#10-32 x 1/2") NLA - Kit, Battery Box Door Assembly, 22NF Short NLA - Label, 22NF Terminal Configuration Warning NLA - Decal, Blank Logo NLA - Decal, Invacare Medallion - Large Locknut (1/4-20) NLA - Sleeve, Door Pivot NLA - Label, 22NF Battery Install/Remove NLA - Kit, Battery Box Door Assembly, GP24 Short NLA - Label, Terminal Configuration Warning, GP24 NLA - Decal, Blank Logo NLA - Decal, Invacare Medallion - Large Locknut (1/4-20) NLA - Sleeve, Door Pivot Label, Battery Install/Remove, GP24 Kit, Battery Box Door Assembly, 22NF Long (For Vent) NLA - Label, 22NF Terminal Configuration Warning NLA - Label, 3 Battery Configuration Warning NLA - Decal, Blank Logo NLA - Decal, Invacare Medallion - Large Locknut (1/4-20) 16 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 9 2 2 9 2 2 1 1 1 1 2 2 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 2 Battery Box Hardware and Door Assembly Non-Elevate For Formula Conventional and Contoura Seating The Battery Boxes are non-serviceable parts in the field. Wheelchair must be returned to Invacare for repair. Call Technical Services for assistance (1-800-832-4707) Item Number Note 21 NOTE: Quantity Per Part Number Description Package Assembly NLA - Sleeve, Door Pivot 1 2 A - Includes Battery Box Door along w/ Items 7-14. B - Includes Battery Box Door along w/ Items 16 and 18-22. C - Includes Battery Box Door along w/ Items 16-21. D - Blank Logo Decal is no longer available and no longer required for item number 19 Invacare Medallion Decal. E - Chairs manufactured before 8/30/04 must have items 1 and 5 ordered together in order for the mounting holes to line up properly F - No longer available as a service part. G - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. 17 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Battery Box Hardware, Door Assembly, Elevate Actuator Motor Elevate For ASBA/ADJASBA, Conventional and Contoura Seating The Battery Boxes are non-serviceable parts in the field. Wheelchair must be returned to Invacare for repair. Call Technical Services for assistance (1-800-832-4707) 18 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Battery Box Hardware, Door Assembly, Elevate Actuator Motor Elevate For ASBA/ADJASBA, Conventional and Contoura Seating The Battery Boxes are non-serviceable parts in the field. Wheelchair must be returned to Invacare for repair. Call Technical Services for assistance (1-800-832-4707) Item Number Note 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 A Part Number 1122258-NLA 1124653-NLA 1124670 1124721-NLA 1079203 1124668-NLA 1125739 B,C 1125776 23 24 25 26 27 28 NOTE: Quantity Per Description Package Assembly NLA - Elevating Actuator Assembly NLA - Bracket, Elevate, Black Plate, Battery Box Bottom NLA - Shroud w/ Decals, Elevate, Battery Box Decal, Warning Pinch Point NLA - Shroud, Front Battery Box NLA - Kit, Battery Box Assembly Hardware Elevate NLA - Screw, Hex Head w/ Patch (5/16-18 x 7/8") Washer, Flat (21/64 x 53/64 x 7/64") Screw, Socket Flat Head (1/4-20 x 3/4") Bolt, Hex Head Cap (1/4-20 x 3/4") Washer (1/4 x 1/2 x 1/16") Screw, Hex Head (1/4-20 x 1-5/8") Screw, Phillips Pan Head (#10-32 x 5/8") NLA - Bracket, Upper Seat, Front, Black NLA - Bracket, Lower Seat, Front, Black Screw, Hex Head w/ Patch (5/16-18 x 3/4") Package, Tie Wrap (5-5/8" L) Locknut (1/4-20) Washer, Flat (3/16 x 5/8 x 1/16") Screw, Phillips Pan Head Tap (#10-32 x 1/2") Kit, Battery Box Door Elevate Assembly, 22NF Short NLA - Label, 22NF Terminal Configuration Warning NLA - Decal, Blank Logo NLA - Decal, Invacare Medallion - Large Locknut (1/4-20) NLA - Sleeve, Door Pivot NLA - Decal, Warning, Battery Install 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 2 3 3 3 4 4 1 1 2 2 6 4 2 1 1 1 1 1 1 1 1 1 1 2 2 1 A - Includes items 8-21 B - Includes items 23-28 C - Blank Logo Decal is no longer available and no longer required for item number 25 Invacare Medallion Decal. 19 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Battery Support Bracket Assembly For TRBKTS Option 20 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Battery Support Bracket Assembly For TRBKTS Option Item Number Note 1 2 3 4 1 2 3 4 1 4 5 1 2 3 4 1 4 5 1 A A B A B B Quantity Per Part Number 1139537-NLA 1139538-NLA 1139539-NLA 1139540-NLA 1139541 1139867-NLA 4 5 NOTE: Description Package Assembly NLA - Kit, Battery Support Bracket Assembly - For 22NF Batteries Screw, Hex Head w/ Patch (1/4-20 x 1/2") Locknut (1/4-20) Bracket, Battery Support, Black NLA - Kit, Battery Support Bracket Assembly - For GP24 Batteries Screw, Hex Head w/ Patch (1/4-20 x 1/2") Locknut (1/4-20) Bracket, Battery Support, Black NLA - Kit, Battery Support Bracket Assembly - For Invisible Super Low Tilt System w/ 22NF Batteries Bracket, Battery Support, Black Screw, Hex Head w/ Patch (1/4-20 x 1/2") Kit, Battery Support Bracket Assembly - For Vent "Ready" System w/ 22NF Batteries Screw, Hex Head w/ Patch (1/4-20 x 5/8") Locknut (1/4-20) Bracket, Battery Support, Black NLA - Kit, Battery Support Bracket Assembly - For Vent "Option" System w/ 22NF Batteries Bracket, Battery Support, Black Screw, Hex Head w/ Patch (1/4-20 x 1/2") Kit, Battery Support Bracket Assembly - For Elevate "Option" System w/ 22NF Batteries Bracket, Battery Support, Black Screw, Hex Head w/ Patch (1/4-20 x 1/2") A - Includes items 2-4 B - Includes items 4 and 5 21 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 4 4 1 1 1 1 1 1 4 4 1 1 1 1 1 1 4 1 1 1 1 1 4 4 1 1 1 1 1 1 4 1 1 1 1 4 Battery Tray Assembly and Wire Harnesses For Vent Tray (3) 22NF Batteries 22 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Battery Tray Assembly and Wire Harnesses For Vent Tray (3) 22NF Batteries Item Number Note Quantity Per 1 A,B Part Number 1120363 2 A,B 1120362 3 A,B 1121143 C D 16721X000 1095502-NLA 1096799-NLA 1121124-NLA 1121125-NLA 1117186-NLA 90017X000 1121142-NLA 1121029-NLA 4 5 6 7 8 9 10 11 12 13 14 15 16 17 12 D 13 14 15 16 17 16 17 17 NOTE: 1139531 1095503 1055747-NLA 1137236-NLA Description Package Assembly Battery Wire Harness with Terminal Hardware, 22NF - Rear Battery Wire Harness with Terminal Hardware, 22NF - Front Harness, Battery Wire with Terminal Hardware, 22NF Vent Locknut (1/4-20) NLA - Package, Tie Wrap (11-1/2" L) NLA - Screw, Hex Flange Whiz Lock (1/4-20 x 7/8") NLA - Battery Strap Assembly, 22NF and GP24 NLA - Battery Strap Assembly For Vent, 22NF NLA - Bracket, Battery Tray Stop, Black Screw, Phillips Pan Head (#10-32 x 5/16") NLA - Battery Tray Assembly, TDX 22NF For Vent NLA - Kit, Vent Battery Harness Assembly with Hardware Harness, Vent Battery NLA - Harness, Vent Battery Extension Screw, Phillips Pan Head (#8-16 x 5/8") Tie Wrap (5-5/8" L) NLA - Grommet, Rubber Kit, Vent Battery Harness Assembly with Hardware For TRBKTS Option Harness, Vent Battery Harness, Vent Battery Extension, TRBKTS Option Screw, Phillips Pan Head (#8-16 x 5/8") Tie Wrap (5-5/8" L) NLA - Grommet, Rubber For TRBKTS Option Package, Tie Wrap (5-5/8" L) NLA - Grommet, Rubber NLA - Grommet, Rubber For TRBKTS Option A - Individual components are not available for the battery wire harnesses B - Includes items 4-6 C - Includes items 7-10 D - Includes items 13-17 23 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 10 1 1 1 1 1 1 1 6 1 4 2 1 1 2 1 1 1 1 1 1 1 1 1 1 2 4 1 1 1 1 1 1 1 10 1 1 1 1 2 4 1 1 1 1 Battery Wire Harnesses, Sensor Proximity Switch, Extension Cables and Energy Chain For All Elevate Systems 24 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Battery Wire Harnesses, Sensor Proximity Switch, Extension Cables and Energy Chain For All Elevate Systems Item Number Note Quantity Per 1 2 3 Part Number 1124657-NLA 1114308 1124654-NLA 4 1124655-NLA 5 6 7 8 9 10 11 12 13 14 15 16 18 19 14 15 16 17 18 19 20 21 22 23 24 25 A 1122586 1125742 F 1125745 B 1024001 1123277-NLA 1125743-NLA C D E 26 27 28 29 1141968 See Note 16721X000 1095502-NLA 1096799-NLA 1125741-NLA 1126173 Description Package Assembly NLA - Bracket, Wire Harness Mounting, Black Screw, Phillips Pan Head Tap (#10-32 x 1/2") NLA - Bracket, Upper Energy Chain Mounting, Black NLA - Bracket, Lower Energy Chain Mounting, Black Sensor, Proximity Switch (30 1/4" L) NLA - Kit, Sensor Proximity/Actuator Switch Mounting Hardware Nut, Hex Keps (#4-40) NLA - Washer, Plain (1/8 x 5/16 x 1/32") NLA - Screw, Phillips Pan Head (#4-40 x 3/8") Kit, Energy Chain with Mounting Hardware Screw, Phillips Pan Head Tap (#10-32 x 1/2") Sensor, Actuator Switch NLA - Cable, Joystick Extension (48") Kit, Battery Harness with Mounting Hardware, Elevate Nut, Keps (#6-32) NLA - Screw, Phillips Pan Head (#6-32 x 7/8") Tie Wrap (5-5/8" L) Washer (1/4 x 1/2 x 1/16") NLA - Kit, Battery Harness with Mounting Hardware, Elevate with TRBKTS option Nut, Keps (#6-32) NLA - Screw, Phillips Pan Head (#6-32 x 7/8") Screw, Phillips Pan Head (#6-32 x 1-1/8") Tie Wrap (5-5/8" L) Washer (1/4 x 1/2 x 1/16") Spacer (1/4 x 5/8 x 3/8") See Footnote Locknut (1/4-20) NLA - Package, Tie Wrap (11-1/2" L) NLA - Screw, Hex Flange Whiz Lock (1/4-20 x 7/8") NLA - Kit, Front Battery Harness with Terminal Hardware Locknut (1/4-20) Tie Wrap (11-1/2" L) NLA - Screw, Hex Flange Whiz Lock (1/4-20 x 7/8") Harness, Elevate Actuator Extension 25 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 2 1 1 1 1 1 1 1 1 6 6 3 4 1 1 1 1 1 1 1 1 1 10 1 1 6 4 2 3 4 2 1 2 1 1 1 1 1 1 1 2 4 2 1 Battery Wire Harnesses, Sensor Proximity Switch, Extension Cables and Energy Chain For All Elevate Systems NOTE: A - Includes items 7-9 B - Includes the Battery Harness and items 15, 16, 18 and 19 C - Includes the Battery harness and items 15-20 D - Rear Battery Harness Kit that included the Rear Battery Harness is no longer available as a service part. E - Includes the Front Battery Harness and items 26-28 F - Includes the Energy Chain and item 11 26 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Seat Frame and Hardware (16"-22" Wide) Elevate Only For ASBA Seating (Before 7/5/05) #1 Seat Frame with Hardware Chair Width 16" Wide 17" Wide 18" Wide 19" Wide 20" Wide 21" Wide 22" Wide 16"-17" Deep 1118313-NLA 1118314-NLA 1118315-NLA 1118316-NLA 1118317-NLA 1118318-NLA 1118319-NLA 18" - 19" Deep 1118322-NLA 1118323-NLA 1118324-NLA 1118325-NLA 1118326-NLA 1118327-NLA 1118328-NLA 20" - 21" Deep 1118331-NLA 1118332-NLA 1118333-NLA 1118334-NLA 1118335-NLA 1118336-NLA 1118337-NLA NOTE: Seat frame includes items 2-5 27 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 22" Deep 1118340-NLA 1118341-NLA 1118342-NLA 1118343-NLA 1118344-NLA 1118345-NLA 1118346-NLA Seat Frame and Hardware (16"-22" Wide) Elevate Only For ASBA Seating (Before 7/5/05) Item Number Note 1 2 3 4 5 Quantity Per Part Number See Chart 1029501 1090768 47471X074 1028594 Description Package Assembly #1 Seat Frame with Hardware Plug Button, Black (1") Kit, Lock Handle w/Rivets (Pair) Spring, Arm Lock Pin, Arm Lock, Black 28 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 2 1 1 1 2 1 2 2 ADJASBA Seat Frame, Seat Pan and Hardware (16"-20" Wide) x (16"-22" Deep) After 7/4/05 29 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com ADJASBA Seat Frame, Seat Pan and Hardware (16"-20" Wide) x (16"-22" Deep) After 7/4/05 Item Number Note 1 2 3 D Quantity Per Part Number 1120288 1122475 1122647 3 1122677 4 1124386 4 1124666 5 5 5 5 6 7 8 9 10 11 12 NOTE: A A B B C 1043082 1044580 1043084 1044584 1135501 1114823 Description Package Assembly Frame, Center Seat, Black Crossbar, Seat Frame (16" - 20" W) Rail, Seat Frame (16 - 20" D For Formula TRE and 16 - 19" D For ADJASBA) Rail, Seat Frame (20 - 22" D Formula TRE) (19 22" D ADJASBA) Pan, Seat with Hook and Loop Fasteners (16 - 20" W) x (16 - 20" D For Formula TRE) & (16 - 19" D For ADJASBA) Pan, Seat, with Hook and Loop Fasteners (16 - 20" W) x (20 - 22" D For Formula TRE) & (19 - 22" D For ADJASBA) Hook Fastener with Adhesive Back (2" W x 18" L) Loop Fastener with Adhesive Back (2" W x 18" L) Hook Fastener with Adhesive back (2" W x 22" L) Loop Fastener with Adhesive back (2" W x 22" L) Kit, Seat Frame Assembly Hardware Screw, Hex Head w/ Patch (1/4-20 x 3/4") Washer (1/4 x 1/2 x 1/16") Spacer, Coved (1/4 x 11/16 x 1/2") Screw, Socket Button (1/4-20 x 3/4") Pin, Roll (3/16 x 1") Decal, Seat Adjustment Warning A - For 16"-19" deep seats B - For 19"-22" deep seats C - Includes items 7-11 D - When ordering Center Seat Frame (item 1), also order 2 ea. Seat Adjustment Warning Decal (item 12). 30 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 4 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 8 2 4 2 2 2 ADJASBA Seat Frame, Seat Pan and Hardware (20"-22" Wide) x (16"-22" Deep) After 7/4/05 31 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com ADJASBA Seat Frame, Seat Pan and Hardware (20"-22" Wide) x (16"-22" Deep) After 7/4/05 Item Number Note 1 2 3 D Quantity Per Part Number 1120288 1120283 1122647 3 1122677 4 1124388 4 1124667 5 5 5 5 6 7 8 9 10 11 12 NOTE: A A B B C 1043082 1044580 1043084 1044584 1135501 1114823 Description Package Assembly Frame, Center Seat, Black Crossbar, Seat Frame (20" - 24" W) Rail, Seat Frame (16 - 20" D For Formula TRE and 16 - 19" D For ADJASBA) Rail, Seat Frame (20 - 22" D Formula TRE) (19 22" D ADJASBA) Pan, Seat, with Hook and Loop Fasteners (20 - 24" W) x (16 - 20" D For Formula TRE) & (16 - 19" D For ADJASBA) Pan, Seat with Hook and Loop Fasteners (20 - 24" W) x (20 - 22" D For Formula TRE) & (19 - 22" D For ADJASBA) Hook Fastener with Adhesive Back (2" W x 18" L) Loop Fastener with Adhesive Back (2" W x 18" L) Hook Fastener with Adhesive back (2" W x 22" L) Loop Fastener with Adhesive back (2" W x 22" L) Kit, Seat Frame Assembly Hardware Screw, Hex Head w/ Patch (1/4-20 x 3/4") Washer (1/4 x 1/2 x 1/16") Spacer, Coved (1/4 x 11/16 x 1/2") Screw, Socket Button (1/4-20 x 3/4") Pin, Roll (3/16 x 1") Decal, Seat Adjustment Warning A - For 16"-19" deep seats B - For 19"-22" deep seats C - Includes items 7-11 D - When ordering Center Seat Frame (item 1), also order 2 ea. Seat Adjustment Warning Decal (item 12). 32 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 4 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 8 2 4 2 2 2 Seat Frame, Seat Pan and Hardware (16"-20" Wide x 16"-22" Deep Conventional) and (16", 18", 20" Wide x 16"-22" Deep Contoura) Seating 33 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Seat Frame, Seat Pan and Hardware (16"-20" Wide x 16"-22" Deep Conventional) and (16", 18", 20" Wide x 16"-22" Deep Contoura) Seating Item Number Note Quantity Per 1 Part Number 1122676 2 3 A 1122475 1122647 3 B 1122677 4 A 1124386 4 B 1124666 5 5 5 5 6 7 8 9 10 11 12 12 A A B B D,E 1043082 1044580 1043084 1044584 1125737 NOTE: Description Package Assembly Frame, Center Seat, Black For Conventional and Contoura Seating Crossbar, Seat Frame (16" - 20" W) Rail, Seat Frame (16 - 20" D For Formula TRE and 16 - 19" D For ADJASBA) Rail, Seat Frame (20 - 22" D Formula TRE) (19 22" D ADJASBA) Pan, Seat with Hook and Loop Fasteners (16 - 20" W) x (16 - 20" D For Formula TRE) & (16 - 19" D For ADJASBA) Pan, Seat, with Hook and Loop Fasteners (16 - 20" W) x (20 - 22" D For Formula TRE) & (19 - 22" D For ADJASBA) Hook Fastener with Adhesive Back (2" W x 18" L) Loop Fastener with Adhesive Back (2" W x 18" L) Hook Fastener with Adhesive back (2" W x 22" L) Loop Fastener with Adhesive back (2" W x 22" L) Kit, Seat Frame Assembly Hardware Screw, Hex Head w/ Patch (1/4-20 x 3/4") Washer (1/4 x 1/2 x 1/16") Pin, Roll (3/16 x 1") Spacer, Coved (1/4 x 11/16 x 1/2") Locknut (1/4-20) Screw, Socket Button Head (1/4-20 x 1-1/2") Screw, Socket Button (1/4-20 x 3/4") 1 1 1 1 4 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 8 4 2 6 2 2 2 A - For 16"-20" deep Conventional and 16"-18" deep Contoura Seating B - For 20"-22" deep Conventional and 19"-21" deep Contoura Seating D - Includes items 7-12 E - After 7/4/05 Threaded Inserts were added to the Center Seat Frame. Items 10 and 11 were no longer needed for item 12 screw. Item 12 was shortened to 3/4" long. 34 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Seat Frame, Seat Pan and Hardware (20"-24" Wide x 16"-22" Deep Conventional) and (20", 22", 24" Wide x 16"-22" Deep Contoura) Seating 35 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Seat Frame, Seat Pan and Hardware (20"-24" Wide x 16"-22" Deep Conventional) and (20", 22", 24" Wide x 16"-22" Deep Contoura) Seating Item Number Note 1 Quantity Per Part Number 1122676 2 3 A 1120283 1122647 3 B 1122677 3 4 C A 1131445-NLA 1124388 4 B 1124667 4 C 1131448-NLA 5 5 5 5 6 7 8 9 10 11 12 12 A A B,C B,C D,E 1043082 1044580 1043084 1044584 1125737 NOTE: Description Package Assembly Frame, Center Seat, Black For Conventional and Contoura Seating Crossbar, Seat Frame (20" - 24" W) Rail, Seat Frame (16 - 20" D For Formula TRE and 16 - 19" D For ADJASBA) Rail, Seat Frame (20 - 22" D Formula TRE) (19 22" D ADJASBA) NLA - Rail, Seat Frame (22" D) Pan, Seat, with Hook and Loop Fasteners (20 - 24" W) x (16 - 20" D For Formula TRE) & (16 - 19" D For ADJASBA) Pan, Seat with Hook and Loop Fasteners (20 - 24" W) x (20 - 22" D For Formula TRE) & (19 - 22" D For ADJASBA) NLA - Pan, Seat, with Hook and Loop Fasteners (20 - 24" W x 22" D) Hook Fastener with Adhesive Back (2" W x 18" L) Loop Fastener with Adhesive Back (2" W x 18" L) Hook Fastener with Adhesive back (2" W x 22" L) Loop Fastener with Adhesive back (2" W x 22" L) Kit, Seat Frame Assembly Hardware Screw, Hex Head w/ Patch (1/4-20 x 3/4") Washer (1/4 x 1/2 x 1/16") Pin, Roll (3/16 x 1") Spacer, Coved (1/4 x 11/16 x 1/2") Locknut (1/4-20) Screw, Socket Button Head (1/4-20 x 1-1/2") Screw, Socket Button (1/4-20 x 3/4") 1 1 1 1 4 2 1 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 8 4 2 6 2 2 2 A - For 16"-20" deep Conventional and 16"-18" deep Contoura Seating B - For 20"-22" deep Conventional and 19"-21" deep Contoura Seating C - 22" deep Contoura Seating D - Includes items 7-12 E - After 7/4/05 Threaded Inserts were added to the Center Seat Frame. Items 10 and 11 were no longer needed for item 12 screw. Item 12 was shortened to 3/4" long. 36 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Seat Frame Mounting Hardware Elevate Only For ASBA Seating (Before 7/5/05) 37 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Seat Frame Mounting Hardware Elevate Only For ASBA Seating (Before 7/5/05) Item Number Note 1 2 3 4 5 5 6 7 8 9 10 NOTE: A Quantity Per Part Number 1125777-NLA Description Package Assembly Kit, A.S.B.A. Seat Frame Mounting Hardware NLA - Screw, Hex Head w/ Patch (5/16-18 x 1-1/2") NLA - Screw, Hex Head w/ Patch (5/16-18 x 7/8") Washer, Flat (21/64 x 53/64 x 7/64") NLA - Bracket, Seat Frame Mounting, Black - Right NLA - Bracket, Seat Frame Mounting, Black - Left Locknut (5/16-18) Screw, Hex Head w/ Patch (5/16-18 x 1-1/4") NLA - Plate, A.S.B.A. Seat Frame Mounting NLA - Nut, Strap Decal, Seat Adjustment Warning A - Includes items 2-10 38 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 4 6 6 1 1 10 4 1 2 2 Seat Frame Mounting Hardware Elevate Only For ADJASBA Seating (After 7/4/05) 39 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Seat Frame Mounting Hardware Elevate Only For ADJASBA Seating (After 7/4/05) Item Number Note 1 2 3 4 5 5 6 7 8 9 10 NOTE: A Quantity Per Part Number 1133804-NLA Description Package Assembly Kit, ADJASBA Seat Frame Mounting Hardware NLA - Screw, Socket Head (5/16-18 x 3/4") NLA - Screw, Hex Head w/ Patch (5/16-18 x 7/8") Washer, Flat (21/64 x 53/64 x 7/64") NLA - Bracket, Seat Frame Mounting, Black - Right NLA - Bracket, Seat Frame Mounting, Black - Left Locknut (5/16-18) Screw, Hex Head w/ Patch (5/16-18 x 1-1/4") NLA - Plate, A.S.B.A. Seat Frame Mounting NLA - Nut, Strap Decal, Seat Adjustment Warning A - Includes items 2-10 40 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 4 6 6 1 1 10 4 1 2 2 Seat Frame Mounting Hardware Elevate Only For ADJASBA Seating with TRBKTS Option 41 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Seat Frame Mounting Hardware Elevate Only For ADJASBA Seating with TRBKTS Option Item Number Note 1 A Quantity Per Part Number 1134945-NLA 2 3 4 5 5 6 7 8 9 10 11 12 NOTE: Description Package Assembly Kit, ADJASBA Seat Frame Mounting Hardware For TRBKTS Option Screw, Socket Head w/ Patch (5/16-18 x 7/8") NLA - Screw, Hex Head w/ Patch (5/16-18 x 7/8") Washer, Flat (21/64 x 53/64 x 7/64") NLA - Bracket, Seat Frame Mounting, Black - Right NLA - Bracket, Seat Frame Mounting, Black - Left Locknut (5/16-18) Screw, Hex Head w/ Patch (5/16-18 x 1-1/4") NLA - Plate, A.S.B.A. Seat Frame Mounting NLA - Nut, Strap Decal, Seat Adjustment Warning Plate, Nut (5/16-18) NLA - Washer, Ground (11/32 x 13/16 x 1/8") A - Includes items 2-12 42 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 6 6 1 1 8 4 1 2 2 2 6 Seat Frame Mounting Hardware Recline Only For Conventional and Contoura Seating 43 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Seat Frame Mounting Hardware Recline Only For Conventional and Contoura Seating Item Number Note 1 2 A Quantity Per Part Number 1125646-NLA 1125751 3 4 5 6 NOTE: Description Package Assembly NLA - Plate, Recline Only Seat Frame Mounting Kit, Seat Frame Mounting Hardware, Recline Only Non-Elevate Screw, Hex Head (5/16-18 x 1") Screw, Hex Head w/ Patch (5/16-18 x 1-1/4") Spacer (5/16 x 7/16 x 3/8") Locknut (5/16-18) A - Includes items 3-6 44 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 4 4 2 8 Seat Frame Mounting Hardware Tilt or Tilt/Recline For Conventional & Contoura Seating 45 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Seat Frame Mounting Hardware Tilt or Tilt/Recline For Conventional & Contoura Seating Item Number Note 1 2 A Quantity Per Part Number 1125749 3 4 NOTE: Description Package Assembly NLA - Kit, Seat Frame Mounting Hardware NLA - Screw, Shoulder Hex Socket Head (1/2 x 3-1/4", 3/8-16) Washer, Flat (3/8 x 11/16 x 1/16") Locknut, Low Profile (3/8-16) A - Includes items 2-4 46 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 2 1 1 2 2 Tilt Frame and Mounting Hardware 47 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Tilt Frame and Mounting Hardware Item Number Note 1 2 3 4 5 6 7 NOTE: A Quantity Per Part Number 1122656 1122598-NLA 1079203 1125748-NLA 1125747 Description Package Assembly Frame with Warning Decals, Tilt, Black NLA - Decal, Warning Actuator/Spring Assist Hardware Decal, Warning Pinch Point NLA - Kit, Bumper Assembly NLA - Kit, Tilt Frame Mounting Hardware Screw, Hex Head w/ Patch (5/16-18 x 1-1/4") Locknut (5/16-18) A - Includes items 6-7 48 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 2 1 1 1 2 1 1 4 4 Balance Spring and Tilt Spring Assist Assemblies For Tilt and Tilt/Recline 49 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Balance Spring and Tilt Spring Assist Assemblies For Tilt and Tilt/Recline Item Number Note 1 2 3 4 5 6 7 8 9 10 A B Quantity Per Part Number 1125750 1124673 11 12 13 14 NOTE: Description Package Assembly NLA - Kit, Balance Spring Assembly Locknut (1/4-20) NLA - Guide, Rod NLA - Spring, Compression (1 x 5-1/2 x 1/4") NLA - Rod, Balance Spring NLA - Plate, Slide Support NLA - Screw, Socket Flat Head w/ Patch (#10-32 x 3/8") Pin, Roll (1/8 x 3/4") NLA - Bracket, Balance Spring, Black Kit, Spring Assist Hardware 400 Lb. Limit Non-Elevate NLA - Screw, Shoulder Hex Socket Head (5/16" x 1-3/4", 1/4-20) Spring, Cylinder Assist Locknut (1/4-20) Spacer, Spring Assist (5/16 x 5/8 x 9/16") A - Includes items 2-9 B - Includes items 11-14 50 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 4 4 1 1 1 1 1 1 1 2 1 1 1 2 2 2 Tilt Actuator Motor and Mounting Hardware 51 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Tilt Actuator Motor and Mounting Hardware Item Number Note Quantity Per 1 C Part Number 1122691 1 B 1146351 2 3 4 5 6 A 1125746 7 8 9 10 11 12 13 NOTE: Description Package Assembly Motor, Tilt Actuator without Mounting Hardware MK5 Motor, Tilt Actuator without Mounting Hardware MK6i Kit, Tilt Actuator Motor Mounting Hardware NLA - Ring, Retaining Rod, Reinforcing Stand-Off, Actuator Motor Screw, Shoulder Hex Socket Head (3/8 x 1-3/4", 5/16-18) NLA - Bracket, Adjustable Clevis, Black Washer, Steel (5/16 x 3/4 x 1/16") Locknut (5/16-18) Screw, Hex Head w/ Patch (5/16-18 x 5/8") Washer, Flat (5/16 x 5/8 x 1/16") NLA - Nut, Hex Jam (1/2-20) Locknut (1/2-20) 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 A - Includes items 3-13 B - For MK6i Electronics only. Includes the Actuator Motor, Bushings and the Integrated Actuator Module (IAM) attached to the motor. The IAM is not available separately. NOTE: Part # 1140033 referenced on the motor is not available, refer to part # 1146351. C - Includes the Actuator Motor and Bushings. NOTE: Part # 1134695 referenced on the motor is not available, refer to part # 1122691. 52 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Recline Actuator Motor and Mounting Hardware 53 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Recline Actuator Motor and Mounting Hardware Item Number Note 1 1 2 D C A Quantity Per Part Number 1125635-NLA 1146350-NLA 1125752 3 4 5 6 7 8 9 B 10 11 12 13 14 NOTE: 1125753 Description Package Assembly NLA - Motor, Recline Actuator - MK5 NLA - Motor, Recline Actuator - MK6i Kit, Recline Actuator Motor Mounting Hardware Conventional NLA - Screw, Shoulder Hex Socket Head (3/8 x 2-3/4", 5/16-18) Washer, Flat (5/16 x 5/8 x 1/16") Locknut (5/16-18) Spacer (3/8 x 1 x 1/2") NLA - Bushing, Actuator Motor (3/8 x 3/4 x 5/32") Screw, Shoulder Hex Socket Head (3/8 x 1-3/4", 5/16-18) NLA - Kit, Recline Actuator Motor Mounting Hardware Contoura Screw, Shoulder Hex Socket (3/8 x 2", 5/16-18) Washer, Flat (5/16 x 5/8 x 1/16") Locknut (5/16-18) NLA - Bushing, Actuator Motor (3/8 x 3/4 x 5/32") Screw, Shoulder Hex Socket Head (3/8 x 1-3/4", 5/16-18) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 1 1 1 1 1 1 1 1 2 2 1 A - Includes items 3-8 B - Includes items 10-14 C - Used with MK6i Electronics only. Includes the Actuator Motor and Bushings. NOTE: Part # 1136915 referenced on the motor is not available, refer to part # 1146350. D - Includes the Actuator Motor and Bushings. NOTE: Part # 1122257 referenced on the motor is not available, refer to part # 1125635. 54 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Elevate Actuator Motor and Mounting Hardware Elevate For ASBA/ADJASBA, Conventional and Contoura Seating 55 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Elevate Actuator Motor and Mounting Hardware Elevate For ASBA/ADJASBA, Conventional and Contoura Seating Item Number Note 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 A Part Number 1122258-NLA 1124653-NLA 1124670 1124721-NLA 1079203 1124668-NLA 1125739 B,C 1125776 F 23 24 25 26 27 28 NOTE: Quantity Per Description Package Assembly NLA - Elevating Actuator Assembly NLA - Bracket, Elevate, Black Plate, Battery Box Bottom NLA - Shroud w/ Decals, Elevate, Battery Box Decal, Warning Pinch Point NLA - Shroud, Front Battery Box NLA - Kit, Battery Box Assembly Hardware Elevate NLA - Screw, Hex Head w/ Patch (5/16-18 x 7/8") Washer, Flat (21/64 x 53/64 x 7/64") Screw, Socket Flat Head (1/4-20 x 3/4") Bolt, Hex Head Cap (1/4-20 x 3/4") Washer (1/4 x 1/2 x 1/16") Screw, Hex Head (1/4-20 x 1-5/8") Screw, Phillips Pan Head (#10-32 x 5/8") NLA - Bracket, Upper Seat, Front, Black NLA - Bracket, Lower Seat, Front, Black Screw, Hex Head w/ Patch (5/16-18 x 3/4") Package, Tie Wrap (5-5/8" L) Locknut (1/4-20) Washer, Flat (3/16 x 5/8 x 1/16") Screw, Phillips Pan Head Tap (#10-32 x 1/2") Kit, Battery Box Door Elevate Assembly, 22NF Short NLA - Label, 22NF Terminal Configuration Warning NLA - Decal, Blank Logo NLA - Decal, Invacare Medallion - Large Locknut (1/4-20) NLA - Sleeve, Door Pivot NLA - Decal, Warning, Battery Install 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 2 3 3 3 4 4 1 1 2 2 6 4 2 1 1 1 1 1 1 1 1 1 1 2 2 1 A - Includes items 8-21 B - Includes items 23-28 C - Blank Logo Decal is no longer available and no longer required for item number 25 Invacare Medallion Decal. F - Elevate Actuator Motor uses the Elevate Integrated Actuator Module (EIAM) when MK6i Electronics are used 56 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Elevate Integrated Actuator Module (EIAM) For Elevate Actuator Motor w/ MK6i Electronics 57 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Elevate Integrated Actuator Module (EIAM) For Elevate Actuator Motor w/ MK6i Electronics Item Number Note 1 2 3 4 5 NOTE: A Quantity Per Part Number 1140036 1125685 Description Package Assembly Module, Elevate Integrated Actuator (EIAM) - MK6i (54" L) Kit, MK5 SAC-E/ MK6i EIAM Mounting Hardware Screw, Phillips Pan Head Tap (#10-32 x 1/2") NLA - Bracket, Mounting, Black Stud Plate, Quad Link A - Includes items 3-5 58 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 2 1 2 Recline Integrated Actuator Module (RIAM) For Formula Recline and Tilt/Recline 59 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Recline Integrated Actuator Module (RIAM) For Formula Recline and Tilt/Recline Item Number Note 1 A Quantity Per Part Number 1145415-NLA 2 3 4 5 6 7 2 1140034 3 1145403-NLA 4 5 6 7 1021742 1025195 1160374 1009838 NOTE: Description Package Assembly NLA - Kit, MK6i Recline Integrated Actuator Module (RIAM) w/ Mtg. Hardware Module, Recline Integrated Actuator (RIAM) - MK6i (36" L) NLA - Bracket, MK6i Recline Integrated Actuator Module, Black (RIAM) Screw, Phillips Pan Head (#4-40 x 1/2") Locknut (1/4-20) Bracket, MK6i Connector, Black Screw, Socket Button (1/4-20 x 3/4") Module, Recline Integrated Actuator (RIAM) - MK6i (36" L) NLA - Bracket, MK6i Recline Integrated Actuator Module, Black (RIAM) Screw, Phillips Pan Head (#4-40 x 1/2") Locknut (1/4-20) Bracket, MK6i Connector, Black Screw, Socket Button (1/4-20 x 3/4") A - Includes items 2-7. Kit is used for Conventional and Contoura Seating 60 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 4 2 1 2 1 1 1 1 1 1 1 1 2 1 2 Seat Pan and Mounting Hardware Elevate Only For ASBA Seating (Before 7/5/05) 61 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Seat Pan and Mounting Hardware Elevate Only For ASBA Seating (Before 7/5/05) #1 Seat Pan 16" Deep - 18" Deep Chair Width 16" W 17" W 18" W 19" W 20" W 21" W 22" W 16" Deep 1066013-NLA 1066014 1066015 1066016-NLA 1066017 1066018-NLA 1066019-NLA 17" Deep 1066024 1066025-NLA 1066026 1066027-NLA 1066028-NLA 1066029-NLA 1066030-NLA 18" Deep 1066035 1066036 1066037 1066038 1066039 1066040 1066041 #1 Seat Pan 19" Deep - 22" Deep Chair Width 16" W 17" W 18" W 19" W 20" W 21" W 22" W 19" Deep 1066046 1066047 1066048 1066049-NLA 1066050 1066051 1066052 20" Deep 1066057-NLA 1066058-NLA 1066059-NLA 1066060 1066061-NLA 1066062-NLA 1066063 21" Deep 1066068-NLA 1066069 1066070 1066071 1066072 1066073-NLA 1066074-NLA 62 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 22" Deep 1066079-NLA 1066080-NLA 1066081-NLA 1066082-NLA 1066083 1066084-NLA 1066085-NLA Seat Pan and Mounting Hardware Elevate Only For ASBA Seating (Before 7/5/05) Item Number Note 1 1 6 2 3 4 5 Quantity Per Part Number See Chart See Chart 1070459 Description Package Assembly #1 Seat Pan 16"-18" Depth #1 Seat Pan 19"-22" Depth Kit, Seat Pan Mounting Hardware Screw, Hex Head (1/4-20 x 1-5/8") Screw, Hex Head (1/4-20 x 1-1/2") Spacer (1/4 x 3/8 x 3/16") Locknut (1/4-20) 63 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 2 4 4 6 Seat Cushion Assembly Contoura Seating #1 Contoura Seat Cushion Assembly NOTE: To order a Mesh Contoura Seat Cushion Assembly, please use quote # SM-100908010838 when placing your order. Chair Width 16" Wide 18" Wide 20" Wide 16" Deep 1132982 17" Deep 1132983 18" Deep 1132984 19" Deep 1132985 20" Deep 1132986 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A 1132987 1132988 1132989 1132990 1132991 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A 1132992 1132993 1132994 1132995 See Note(s) A See Note(s) A See Note(s) A 1132999 See Note(s) A 22" Wide N/A N/A 24" Wide N/A N/A NOTE: 1133004 See Note(s) A A - Cushion Foam is not available separately. 21" Deep 22" Deep N/A N/A N/A N/A 1132996 1132997 1132998 See Note(s) A See Note(s) A See Note(s) A See Note(s) A 1133000 1133001 1133002 1133003 See Note(s) A See Note(s) A See Note(s) A See Note(s) A 1133005 1133006 1133007 1133008 See Note(s) A See Note(s) A See Note(s) A See Note(s) A 64 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Seat Cushion Assembly Contoura Seating #2 Contoura Seat Cushion Cover Before 12/16/10 Chair Width 16" Deep 17" Deep 18" Deep 19" Deep 20" Deep 21" Deep 22" Deep 16" Wide 1132953-NLA 1132954-NLA 1132955-NLA 1132956-NLA 1132957-NLA N/A N/A 18" Wide 1132958-NLA 1132959-NLA 1132960-NLA 1132961-NLA 1132962-NLA N/A N/A 20" Wide 1132963-NLA 1132964-NLA 1132965-NLA 1132966-NLA 1132967-NLA 1132968-NLA 1132969-NLA 22" Wide N/A N/A 1132970-NLA 1132971-NLA 1132972-NLA 1132973-NLA 1132974-NLA 24" Wide N/A N/A 1132975-NLA 1132976-NLA 1132977-NLA 1132978-NLA 1132979-NLA Contoura Seat Cushion Covers listed on this chart are No Longer Available. Refer to the Contoura Seat Cushion Covers dated after 12/15/10 as a direct replacement. 65 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Seat Cushion Assembly Contoura Seating #2 Contoura Seat Cushion Cover After 12/15/10 Chair Width 16" Wide 18" Wide 20" Wide 22" Wide 24" Wide 16" Deep 1167372 1167377 1167382 N/A N/A 17" Deep 1167373 1167378 1167383 N/A N/A 18" Deep 1167374 1167379 1167384 1167389 1167394 19" Deep 1167375 1167380 1167385 1167390 1167395 20" Deep 1167376 1167381 1167386 1167391 1167396 21" Deep N/A N/A 1167387 1167392 1167397 22" Deep N/A N/A 1167388 1167393 1167398 #2 Contoura Seat Cushion Cover, Mesh (CTBMSH) Chair Width 16" Wide 18" Wide 20" Wide 22" Wide 24" Wide 16" Deep 1164208 1164213 1164218 N/A N/A 17" Deep 1164209 1164214 1164219 N/A N/A 18" Deep 1164210 1164215 1164220 1164225 1164230 19" Deep 1164211 1164216 1164221 1164226 1164231 20" Deep 1164212 1164217 1164222 1164227 1164232 66 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 21" Deep N/A N/A 1164223 1164228 1164233 22" Deep N/A N/A 1164224 1164229 1164234 Back Upholstery, Nylon Elevate Only For ASBA/ADJASBA Seating Single Liners Width 16" W 17" W 18" W 16"-17" High 1045175 1045176 1045177 18"-19" High 1045207 1045208 1045209 20" High 1068947 1068948 1068949 21"-22" High 1045159 1045160 1045161 67 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 23"-24" High 1054529 1054530 1054531 Back Upholstery, Nylon Elevate Only For ASBA/ADJASBA Seating Dual Liners 16"-17" High 1045180 1045181 1045182 1045183 1045184 1045185 1045186 Width 16" W 17" W 18" W 19" W 20" W 21" W 22" W 18" - 19" High 1045212 1045213 1045214 1045215 1045216 1045217 1045218 20" High 1068952 1068953 1068954 1068955 1068956 1068957 1068958 21" - 22" High 1045164 1045165 1045166 1045167 1045168 1045169 1045170 23" - 24" High 1054534 1054535 1054536 1054537 1054538 1054539 1054540 NOTE: Dual liner back upholstery is used with chairs that have a seat deeper than 17" or back wider than 18". Back Upholstery Hardware Item Number Note A A A NOTE: Quantity Per Part Number See Chart See Chart 1026298 Description Package Assembly Single Liners Dual Liners - Nylon Package, Screw with Washer (#10 x 7/8") (Pair) A - Not Shown 68 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 2 1 1 1 Conventional Back without Mounting Hardware NOTE: Extruded back canes come in one back height only. Back cane material height for extruded back canes measure approximately 20-1/2". Overall back height from the seat pan to top of the extruded back cane is approximately 22-1/2". Only the Back Assembly needs to be replaced when changing back heights. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. 69 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Conventional Back without Mounting Hardware NOTE: Extruded back canes come in one back height only. Back cane material height for extruded back canes measure approximately 20-1/2". Overall back height from the seat pan to top of the extruded back cane is approximately 22-1/2". Only the Back Assembly needs to be replaced when changing back heights. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. Item Number Note 1 1 2 2 3 3 4 5 A NOTE: Quantity Per Part Number See Chart See Chart See Chart See Chart See Chart See Chart 1125723 1125724-NLA Description Package Assembly #1 Back Assembly without Hardware 16"-20" Wide #1 Back Assembly without Hardware 21"-24" Wide #2 Back Pan with Vinyl Edge Trim 16"-20" Wide #2 Back Pan with Vinyl Edge Trim 21"-24" Wide #3 Back Cushion Assembly 16"-20" Wide #3 Back Cushion Assembly 21"-24" Wide Kit, Hook Fastener w/ Adhesive Back NLA - Trim, Edge, Cut-To-Length, Vinyl Black (96" L) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 A - Hook Fastener Adhesive kit is used to attach the Back Cover to the Back Pan and must be ordered when a new Back Pan or Back Assembly is requested. #1 Back Assembly without Hardware 16"-20" Wide Overall Back Height 20" 21" 22" 23" 24" 25" 26" Material Back Height 15" 16" 17" 18" 19" 20" 21" 16" Wide 17" Wide 18" Wide 19" Wide 20" Wide 1125564 1125573 1125582 1125591 1125600 1125609 1125618 1125565 1125574 1125583 1125592 1125601 1125610 1125619 1125566 1125575 1125584 1125593 1125602 1125611 1125620 1125567 1125576 1125585 1125594 1125603 1125612 1125621 1125568 1125577 1125586 1125595 1125604 1125613 1125622 #1 Back Assembly without Hardware 21"-24" Wide Overall Back Height 20" 21" 22" Material Back Height 15" 16" 17" 21" Wide 22" Wide 23" Wide 24" Wide 1125569 1125578 1125587 1125570 1125579 1125588 1125571 1125580 1125589 1125572 1125581 1125590 70 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Conventional Back without Mounting Hardware NOTE: Extruded back canes come in one back height only. Back cane material height for extruded back canes measure approximately 20-1/2". Overall back height from the seat pan to top of the extruded back cane is approximately 22-1/2". Only the Back Assembly needs to be replaced when changing back heights. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. #1 Back Assembly without Hardware 21"-24" Wide Overall Back Height 23" 24" 25" 26" Material Back Height 18" 19" 20" 21" 21" Wide 22" Wide 23" Wide 24" Wide 1125596 1125605 1125614 1125623 1125597 1125606 1125615 1125624 1125598 1125607 1125616 1125625 1125599 1125608 1125617 1125626 71 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Conventional Back without Mounting Hardware NOTE: Extruded back canes come in one back height only. Back cane material height for extruded back canes measure approximately 20-1/2". Overall back height from the seat pan to top of the extruded back cane is approximately 22-1/2". Only the Back Assembly needs to be replaced when changing back heights. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. #2 Back Pan with Vinyl Edge Trim 16"-20" Wide Overall Back Height 20" 21" 22" 23" 24" 25" 26" Material Back Height 15" 16" 17" 18" 19" 20" 21" 16" Wide 17" Wide 18" Wide 19" Wide 20" Wide 1124578 1124579 1124580 1124581 1124582 1124583 1124584 1124585 1124586 1124587 1124588 1124589 1124590 1124591 1124592 1124593 1124594 1124595 1124596 1124597 1124598 1124599 1124600 1124601 1124602 1124603 1124604 1124605 1124606 1124607 1124608 1124609 1124610 1124611 1124612 #2 Back Pan with Vinyl Edge Trim 21"-24" Wide Overall Back Height 20" 21" 22" 23" 24" 25" 26" Material Back Height 15" 16" 17" 18" 19" 20" 21" 21" Wide 22" Wide 23" Wide 24" Wide 1124613 1124614 1124615 1124616 1124617 1124618 1124619 1124620 1124621 1124622 1124623 1124624 1124625 1124626 1124627 1124628 1124629 1124630 1124631 1124632 1124633 1124634 1124635 1124636 1124637 1124638 1124639 1124640 Hook Adhesive is not included with the Back Pan 72 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Conventional Back without Mounting Hardware NOTE: Extruded back canes come in one back height only. Back cane material height for extruded back canes measure approximately 20-1/2". Overall back height from the seat pan to top of the extruded back cane is approximately 22-1/2". Only the Back Assembly needs to be replaced when changing back heights. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. #3 Back Cushion Assembly 16"-20" Wide Overall Back Height 20" 21" 22" 23" 24" 25" 26" Material Back Height 15" 16" 17" 18" 19" 20" 21" 16" Wide 17" Wide 18" Wide 19" Wide 20" Wide 1097397 1097404 1097411 1097418 1097425 1097432 1097439 1097398 1097405 1097412 1097419 1097426 1097433 1097440 1097399 1097406 1097413 1097420 1097427 1097434 1097441 1097400 1097407 1097414 1097421 1097428 1097435 1097442 1097401 1097408 1097415 1097422 1097429 1097436 1097443 Back cover and foam are sold as a back cushion assembly only. Chart reflects chair width and the actual back cushion width will be 1" wider than the chair width. #3 Back Cushion Assembly 21"-24" Wide Overall Back Height 20" 21" 22" 23" 24" 25" 26" Material Back Height 15" 16" 17" 18" 19" 20" 21" 21" Wide 22" Wide 23" Wide 24" Wide 1097402 1097409 1097416 1097423 1097430 1097437 1097444 1125543 1125546 1125549 1125552 1125555 1125558 1125561 1125544 1125547 1125550 1125553 1125556 1125559 1125562 1125545 1125548 1125551 1125554 1125557 1125560 1125563 Back cover and foam are sold as a back cushion assembly only. Chart reflects chair width and the actual back cushion width will be 1" wider than the chair width. 73 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Contoura Back without Mounting Hardware - Before 5/15/09 NOTE: When changing seat width on any system that has Recline and Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-100628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. NOTE: Extruded back canes come in one back height only. Back cane material height for the contoura extruded back canes measure approximately 20-1/2". Overall back height from the seat pan to top of the extruded back cane is approximately 23". Only the Back Assembly needs to be replaced when changing back heights. Contoura Backs for ADJASBA Seating do not use the 24" wide selection 74 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Contoura Back without Mounting Hardware - Before 5/15/09 NOTE: When changing seat width on any system that has Recline and Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-100628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. NOTE: Extruded back canes come in one back height only. Back cane material height for the contoura extruded back canes measure approximately 20-1/2". Overall back height from the seat pan to top of the extruded back cane is approximately 23". Only the Back Assembly needs to be replaced when changing back heights. Contoura Backs for ADJASBA Seating do not use the 24" wide selection 75 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Contoura Back without Mounting Hardware - Before 5/15/09 NOTE: When changing seat width on any system that has Recline and Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-100628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. NOTE: Extruded back canes come in one back height only. Back cane material height for the contoura extruded back canes measure approximately 20-1/2". Overall back height from the seat pan to top of the extruded back cane is approximately 23". Only the Back Assembly needs to be replaced when changing back heights. Contoura Backs for ADJASBA Seating do not use the 24" wide selection Item Number Note Quantity Per 1 Part Number See Chart 2 See Chart 3 See Chart 4 1125725-NLA 5 1125724-NLA Description Package Assembly #1 Back Assembly without Hardware 16", 18", 20", 22", 24" Wide #2 Back Pan with Vinyl Edge Trim 16", 18", 20", 22", 24" Wide #3 Back Cushion Assembly 16", 18", 20", 22", 24" Wide NLA - Hook Fastener w/ Adhesive Back (1" W x 48" L) NLA - Trim, Edge, Cut-To-Length, Vinyl Black (96" L) 76 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 Contoura Back without Mounting Hardware - Before 5/15/09 NOTE: When changing seat width on any system that has Recline and Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-100628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. NOTE: Extruded back canes come in one back height only. Back cane material height for the contoura extruded back canes measure approximately 20-1/2". Overall back height from the seat pan to top of the extruded back cane is approximately 23". Only the Back Assembly needs to be replaced when changing back heights. Contoura Backs for ADJASBA Seating do not use the 24" wide selection #1 Back Assembly without Hardware 16", 18", 20", 22", 24" Wide Overall Back Height 25" 29" Material Back Height 20" 24" 16" Wide 18" Wide 20" Wide 22" Wide 24" Wide 1132828-NLA 1132825-NLA 1132829-NLA 1124733 1132830-NLA 1124734 1132831-NLA 1132826-NLA 1132832-NLA 1132827-NLA NOTE: When changing seat width on any system that has Recline and Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-100628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. #2 Back Pan with Vinyl Edge Trim 16", 18", 20", 22", 24" Wide Overall Back Height Material Back Height 16" Wide 18" Wide 20" Wide 25" 20" 1131405-NLA 1131406-NLA 1131407-NLA 29" 24" 1131410-NLA 1122454-NLA 1122453-NLA NOTE: 22" Wide 1131408-NLA See Note(s) A 1131411-NLA 24" Wide 1131409-NLA 1131412-NLA A - Item is No Longer Available. Back Assembly, part # 1132831 must be purchased for replacement. #3 Back Cushion Assembly 16", 18", 20", 22", 24" Wide Overall Back Height Material Back Height 16" Wide 18" Wide 20" Wide 22" Wide 25" 20" 1132820-NLA 1132821-NLA 1132822-NLA 1132823-NLA 29" NOTE: 24" 1132817-NLA 1125641 1125642 1132818-NLA A - Item is No Longer Available. Back Assembly, part # 1132827 must be purchased for replacement. B - Item is No Longer Available. Back Assembly, part # 1132832 must be purchased for replacement. 77 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 24" Wide 1132824-NLA See Note(s) B 1132819-NLA See Note(s) A Curve Contoura Back w/o Mounting Hardware - After 5/14/09 NOTE: When changing seat width on any system that has Recline and Curve Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-100628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. NOTE: Extruded back canes come in one back height only. Back cane material height for the contoura extruded back canes measure approximately 20-1/2". Overall back height from the seat pan to top of the extruded back cane is approximately 23". Only the Back Assembly needs to be replaced when changing back heights. 78 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Curve Contoura Back w/o Mounting Hardware - After 5/14/09 NOTE: When changing seat width on any system that has Recline and Curve Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-100628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. NOTE: Extruded back canes come in one back height only. Back cane material height for the contoura extruded back canes measure approximately 20-1/2". Overall back height from the seat pan to top of the extruded back cane is approximately 23". Only the Back Assembly needs to be replaced when changing back heights. 79 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Curve Contoura Back w/o Mounting Hardware - After 5/14/09 NOTE: When changing seat width on any system that has Recline and Curve Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-100628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. NOTE: Extruded back canes come in one back height only. Back cane material height for the contoura extruded back canes measure approximately 20-1/2". Overall back height from the seat pan to top of the extruded back cane is approximately 23". Only the Back Assembly needs to be replaced when changing back heights. Item Number Note Quantity Per 1 1 3 3 A A B B Part Number See Chart See Chart See Chart See Chart 6 C 1166151 6 7 8 6 7 8 9 C 1163130 C 1163131 NOTE: 1084410-NLA Description Package Assembly #1 Curved Contoura Back Kit #1 Mesh Curved Contoura Back Kit (CTBMSH) #3 Curve Contoura Back Cushion Assembly #3 Mesh Curve Contoura Back Cushion Assembly (CTBMSH) Kit, Lateral Support, Contoura Back (22" H) (Pair) Screw, Socket, Button (1/4-20 x 3/8") Support, Lateral (22" H) Kit, Lateral Support, Contoura Back (25" H) (Pair) Screw, Socket, Button (1/4-20 x 3/8") Support, Lateral (25" H) Kit, Lateral Support, Contoura Back (28" H) (Pair) Screw, Socket, Button (1/4-20 x 3/8") Support, Lateral (28" H) NLA - Support, Lumbar - Large 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 1 4 2 1 4 2 1 A - Includes Items 2 thru 9. B - Includes Items 4 and 5. Back Cover and Foam are sold as a Back Cushion Assembly only. C - Included Items 7 and 8. Item #2 is a non-saleable part. Refer to item #1 Kit when ordering. #1 Curved Contoura Back Kit Overall Back Height Material Back Height 22" High 17" High 25" High 20" High 28" High 23" High NOTE: 16" Wide 18" Wide 20" Wide 22" Wide 24" Wide 1165846 1165847 1165848 1165849 1165850 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A 1161480 1161482 1161484 1161486 1161488 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A 1161481 1161483 1161485 1161487 1161489 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A A - Includes items 2-9 NOTE: When changing seat width on any system that has Recline and Curve Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-100628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. Overall Back Height includes the spacing gap dimension from the bottom of the Back Assembly to the Seat Pan 80 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Curve Contoura Back w/o Mounting Hardware - After 5/14/09 NOTE: When changing seat width on any system that has Recline and Curve Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-100628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. NOTE: Extruded back canes come in one back height only. Back cane material height for the contoura extruded back canes measure approximately 20-1/2". Overall back height from the seat pan to top of the extruded back cane is approximately 23". Only the Back Assembly needs to be replaced when changing back heights. #1 Mesh Curved Contoura Back Kit (CTBMSH) Overall Back Height Material Back Height 22" High 17" High 25" High 20" High 28" High 23" High NOTE: 16" Wide 18" Wide 20" Wide 22" Wide 24" Wide 1165837 1165842 1165843 1165844 1165845 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A 1164235 1164237 1164239 1164241 1164243 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A 1164236 1164238 1164240 1164242 1164244 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A A - Includes items 2-9 NOTE: When changing seat width on any system that has Recline and Curve Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-100628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. 81 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Curve Contoura Back w/o Mounting Hardware - After 5/14/09 NOTE: When changing seat width on any system that has Recline and Curve Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-100628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. NOTE: Extruded back canes come in one back height only. Back cane material height for the contoura extruded back canes measure approximately 20-1/2". Overall back height from the seat pan to top of the extruded back cane is approximately 23". Only the Back Assembly needs to be replaced when changing back heights. #3 Curve Contoura Back Cushion Assembly Overall Back Height Material Back Height 22" High 17" High 25" High 20" High 28" High 23" High NOTE: 16" Wide 18" Wide 20" Wide 22" Wide 24" Wide 1166146 1166147 1166148 1166149 1166150 See Note(s) B See Note(s) B See Note(s) B See Note(s) B See Note(s) B 1163248 1163250 1163252 1163254 1163256 See Note(s) B See Note(s) B See Note(s) B See Note(s) B See Note(s) B 1163249 1163251 1163253 1163255 See Note(s) B See Note(s) B See Note(s) B See Note(s) B B - Includes items 4 and 5. Back Cover and Foam are sold as a Back Cushion Assembly only. 1163257 See Note(s) B Overall Back Height includes the spacing gap dimension from the bottom of the Back Assembly to the Seat Pan #3 Mesh Curve Contoura Back Cushion Assembly (CTBMSH) Dimensions 22" High 25" High 28" High NOTE: 16" Wide 1166141 18" Wide 1166142 20" Wide 1166143 22" Wide 1166144 24" Wide 1166145 See Note(s) B See Note(s) B See Note(s) B See Note(s) B See Note(s) B 1171642 1171644 1171646 1171648 1171650 See Note(s) B See Note(s) B See Note(s) B See Note(s) B See Note(s) B 1171643 1171645 1171647 1171649 See Note(s) B See Note(s) B See Note(s) B See Note(s) B B - Includes items 4 and 5. Back Cover and Foam are sold as a Back Cushion Assembly only. Overall Back Height includes the spacing gap dimension from the bottom of the Back Assembly to the Seat Pan 82 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1171651 See Note(s) B Back Mounting Hardware Conventional Tilt - Before 5/15/09 83 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Mounting Hardware Conventional Tilt - Before 5/15/09 Item Number Note 1 2 3 4 5 6 NOTE: A Quantity Per Part Number 1125757 Description Package Assembly Kit, Back Mounting Hardware For Conventional Tilt Locknut (1/4-20) Washer (1/4 x 23/32 x 1/16") Spacer, Coved (1/4 x 7/8 x 7/16") Spacer (1/4 x 5/8 x 3/8") Screw, Socket Button Head (1/4-20 x 2") A - Includes items 2-6 84 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 4 8 4 4 4 Back Mounting Hardware Conventional Recline and Tilt/Recline - Before 5/15/09 85 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Mounting Hardware Conventional Recline and Tilt/Recline - Before 5/15/09 Item Number Note 1 A Quantity Per Part Number 1125756 2 3 4 5 6 7 8 NOTE: Description Package Assembly Kit, Back Mounting Hardware For Conventional Recline and Tilt/Recline T-Nut (1/4-20) Locknut (1/4-20) NLA - Bracket, Angled Back, Black Washer (1/4 x 1/2 x 1/16") Screw, Hex Head w/ Patch (1/4-20 x 1/2") Washer (1/4 x 23/32 x 1/16") Screw, Socket Button (1/4-20 x 3/4") A - Includes items 2-8 86 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 8 4 4 8 8 4 4 Back Mounting Hardware Contoura Tilt - Before 5/15/09 87 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Mounting Hardware Contoura Tilt - Before 5/15/09 Item Number Note 1 2 3 4 5 6 7 8 9 NOTE: A Quantity Per Part Number 1125755 Description Package Assembly Kit, Back Mounting Hardware For Contoura Tilt T-Nut (1/4-20) Locknut (1/4-20) Washer (1/4 x 1/2 x 1/16") NLA - Bracket, Back Mounting, Black Screw, Hex Head w/ Patch (1/4-20 x 1/2") Washer (1/4 x 23/32 x 1/16") Screw, Socket Button (1/4-20 x 3/4") NLA - Bracket, Contoura Shear Lock Out, Black A - Includes items 2-9 88 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 16 4 16 4 16 4 4 2 Contoura Back Mounting Hardware ADJASBA Only - Before 5/15/09 89 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Contoura Back Mounting Hardware ADJASBA Only - Before 5/15/09 Item Number Note 1 2 3 4 5 6 7 NOTE: A Quantity Per Part Number 1140945 Description Package Assembly Kit, Contoura Back Mounting Hdwr. - Round Canes Bracket, Back Mounting, Front, Black Screw, Phillips Oval Head (#10-16 x 7/8") Screw, Socket Button (1/4-20 x 3/4") Washer (1/4 x 23/32 x 1/16") Locknut (1/4-20) Bracket, Back Mounting, Rear, Black A - Includes items 2-7 90 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 4 2 8 8 8 4 Back Mounting Hardware Contoura Recline and Tilt/Recline - Before 5/15/09 91 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Mounting Hardware Contoura Recline and Tilt/Recline - Before 5/15/09 Item Number Note 1 A Quantity Per Part Number 1125754 2 3 4 5 6 7 8 NOTE: Description Package Assembly Kit, Back Mounting Hardware For Contoura Recline and Tilt/Recline T-Nut (1/4-20) NLA - Bracket, Back Mounting, Black Washer (1/4 x 1/2 x 1/16") Screw, Hex Head w/ Patch (1/4-20 x 1/2") Locknut (1/4-20) Washer (1/4 x 23/32 x 1/16") Screw, Socket Button (1/4-20 x 3/4") A - Includes items 2-8 92 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 4 2 4 4 6 6 6 Curve Contoura Mounting Back Hardware - After 5/14/09 93 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Curve Contoura Mounting Back Hardware - After 5/14/09 Item Number Note 1 A Quantity Per Part Number 1157925 2 3 4 5 6 7 NOTE: Description Package Assembly Kit, Metal Curved and Curve Contoura Back Mounting Hardware Spacer, Back Pan, Black Hook, Back Assembly Mounting Screw, Socket Button Head (1/4-20 x 1") Washer (1/4 x 23/32 x 1/16") Screw, Phillips Oval Head (#10-16 x 7/8") Locknut (1/4-20) A - Includes Items 2 thru 7. 94 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 4 4 4 8 2 4 Prop Rod Assembly Contoura Tilt 95 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Prop Rod Assembly Contoura Tilt Item Number Note 1 2 3 4 5 6 7 8 9 10 B,C,A 11 12 NOTE: Quantity Per Part Number 1125764 Description Package Assembly Kit, Prop Rod Assembly Contoura Tilt Screw, Shoulder Hex Socket (3/8 x 2", 5/16-18) Washer, Flat (5/16 x 5/8 x 1/16") Locknut (5/16-18) NLA - Kit, Top Prop Rod with Bushings NLA - Tube, Middle Prop Rod, Black NLA - Kit, Bottom Prop Rod Tube with Bushings Screw, Socket Head w/ Patch (3/8-16 x 1-1/2") Locknut, Low Profile (3/8-16) Screw, Shoulder Hex Socket Head (3/8 x 1-3/4", 5/16-18) NLA - Bushing, Actuator Motor (3/8 x 3/4 x 5/32") Spacer (3/8 x 1 x 1/2") 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 2 1 1 1 2 1 A - Includes items 2-12 B - When a vent tray is present, item 11 located on the top side of the prop rod is replaced with item 12 C - Relocation of holes were made 7/5/05 for items 5, 6 and 7. Item 1 must be ordered for chairs manufactured before 7/5/05. 96 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Recline Shear Link Assemblies 97 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Recline Shear Link Assemblies Item Number Note 1 2 3 4 5 6 7 8 8 9 10 11 12 13 14 15 16 16 17 18 18 18 18 18 18 18 18 18 18 NOTE: A B C C C C C D D D D D Quantity Per Part Number 1125758 1168997 1131413 1122580 1122623 1131414 1131415 1161800 1161653 1161658 1161959 1161823 Description Package Assembly Kit, Recline Shear Link Assembly Conventional (Pair) Screw, Hex Head w/ Patch (1/4-20 x 5/8") Washer (1/4 x 1/2 x 1/16") Plate, Shear Adapter T-Nut (1/4-20) Locknut, Low Profile (3/8-16) Washer, Flat (3/8 x 11/16 x 1/16") Link, Recline Shear, Black - Right Link, Recline Shear, Black - Left Stand-Off, Recline Shear Link Kit, Recline Shear Link Assembly, Contoura/Curve Contoura (Pair) Screw, Hex Head w/ Patch (1/4-20 x 5/8") Washer (1/4 x 1/2 x 1/16") T-Nut (1/4-20) Locknut, Low Profile (3/8-16) Washer, Flat (3/8 x 11/16 x 1/16") Link, Recline Shear, Black - Right Link, Recline Shear, Black - Left Stand-Off, Recline Shear Link Adapter, Recline Shear Contoura (16" W) Adapter, Recline Shear Contoura (18" W) Adapter, Recline Shear Contoura (20" W) Adapter, Recline Shear Contoura (22" W) Adapter, Recline Shear Contoura (24" W) Adapter, Recline Shear, Curve Contoura (16" W) Adapter, Recline Shear, Curve Contoura (18" W) Adapter, Recline Shear, Curve Contoura (20" W) Adapter, Recline Shear, Curve Contoura (22" W) Adapter, Recline Shear, Curve Contoura (24" W) 1 1 1 1 1 1 1 1 1 1 1 1 4 4 2 4 4 4 1 1 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 4 4 4 1 1 4 2 2 2 2 2 2 2 2 2 2 A - Includes items 2-9. The Recline Shear Link and Recline Shear Link Stand-Off were revised as of 6/28/10. The Shear Link is now made of thicker material and the Stand-Off is thinner. The kit is backward compatible to all chairs in the field. B - Includes items 11-17. The Recline Shear Link and Recline Shear Link Stand-Off were revised as of 6/28/10. The Shear Link is now made of thicker material and the Stand-Off is thinner. The kit is backward compatible to all chairs in the field. C - Not used for Curve Contoura. For use on Contoura only. D - Not used for Contoura. For use on Curve Contoura only. 98 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Canes, Spreader Bars and Attaching Hardware Elevate Only For ASBA Seating (Before 7/5/05) NOTE: Chairs manufactured with a seat width, seat depth or back height of 20" and greater including all heavy duty packages will be equipped with a spreader bar standard. 99 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Canes, Spreader Bars and Attaching Hardware Elevate Only For ASBA Seating (Before 7/5/05) NOTE: Chairs manufactured with a seat width, seat depth or back height of 20" and greater including all heavy duty packages will be equipped with a spreader bar standard. Item Number Note 1 2 3 4 5 6 7 8 9 10 11 12 5 6 7 8 A B 9 10 11 12 NOTE: Quantity Per Part Number See Chart See Chart 1135506 1134426 1070457 1070458 Description Package Assembly #1 Back Cane Assemblies #2 Spreader Bar Package, Foam Hand Grip (9" L) Package, Plug Button, Black (3/4") Kit, Back Cane Attaching Hardware Locknut (5/16-24) Screw w/ Lug (5/16-24 x 1-3/8") Insert, Non-Threaded Back Cane (For Back Heights 20" and Lower) Screw, Hex Head (1/4-20 x 1-5/8") Washer (1/4 x 23/32 x 1/16") Locknut (1/4-20) Spacer, Coved (1/4 x 11/16 x 1/2") Kit, Back Cane Attaching Hardware Locknut (5/16-24) Screw w/ Lug (5/16-24 x 1-3/8") NLA - Insert, Non-Threaded Back Cane (For Back Heights 21" and Higher) Screw, Hex Head (1/4-20 x 1-5/8") Washer (1/4 x 23/32 x 1/16") Locknut (1/4-20) Spacer, Coved (1/4 x 11/16 x 1/2") A - Includes items 6-12 and used for 16"-20" High Back canes B - Includes items 6-12 and used for 21"-24" High Back canes 100 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com -1 10 10 2 1 1 1 -1 1 1 1 2 2 2 1 1 1 1 2 1 1 1 4 4 4 4 1 2 2 2 1 1 1 1 4 4 4 4 Back Canes, Spreader Bars and Attaching Hardware Elevate Only For ASBA Seating (Before 7/5/05) NOTE: Chairs manufactured with a seat width, seat depth or back height of 20" and greater including all heavy duty packages will be equipped with a spreader bar standard. #1 Back Cane Assemblies Back CaneNo Push Handle 10 Deg. Bend 1048992-NLA 1048993-NLA 1048994-NLA 1048995-NLA 1048996-NLA N/A N/A N/A N/A Back Height 16" 17" 18" 19" 20" 21" 22" 23" 24" Back CanePush Handle Straight 1048558 1048559 1048560 1048561 1048562 N/A N/A N/A N/A Back CanePush Handle 10 Deg. Bend 1045575 1045576 1045577 1045578 1045579-NLA 1052227-NLA 1052230 1054521 1054524 NOTE: Back Cane Assemblies include Foam Grips and Plug Buttons where shown #2 Spreader Bar Chair Width 16" 17" 18" 19" 20" 21" 22" Part Number 1043873 1043874 1043875 1043876 1043877 1043878 1043879 101 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Canes and Spreader Bars For ADJASBA Seat (16"-22" Wide) After 7/4/05 Contoura, Curve Contoura, Conventional Backs 16"-22" Wide for ADJASBA Seating do not utilize a Spreader Bar Assembly. 102 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Canes and Spreader Bars For ADJASBA Seat (16"-22" Wide) After 7/4/05 Contoura, Curve Contoura, Conventional Backs 16"-22" Wide for ADJASBA Seating do not utilize a Spreader Bar Assembly. Item Number Note 1 2 3 4 5 6 7 8 9 10 4 5 6 7 8 9 10 11 12 Quantity Per A Part Number See Chart 1135506 1134426 1125709 A 1125710 1025730 1031026 NOTE: Description Package Assembly #1 Back Cane Assemblies Package, Foam Hand Grip (9" L) Package, Plug Button, Black (3/4") Kit, Spreader Bar Assembly (16"-20" Wide) NLA - Handle, Spreader Bar, Black Screw, Hex Head (1/4-20 x 1-1/2") Spacer, Coved (1/4 x 11/16 x 1/2") Anti-Rattle (1") Tube, Spreader Bar, Adjustable, Black (16 - 20" W) Locknut (1/4-20) Kit, Spreader Bar Assembly 20"-24" Wide NLA - Handle, Spreader Bar, Black Screw, Hex Head (1/4-20 x 1-1/2") Spacer, Coved (1/4 x 11/16 x 1/2") Anti-Rattle (1") Tube, Spreader Bar, Adjustable, Black (20 - 24" W) Locknut (1/4-20) Locknut (5/16-24) Screw w/ Lug (5/16-24 x 1-3/8") 1 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 2 1 2 1 2 2 4 2 1 2 2 2 A - Includes items 5-10 #1 Back Cane Assemblies 16" 17" Back CaneNo Push Handle 10 Deg. Bend Right 1134066 1134068 Back CaneNo Push Handle 10 Deg. Bend Left 1134067 1134069 18" 1134070 1134071 19" 1134072 1134073 20" 1134074 1134075 21" 1134076 1134077 22" 1134078 1134079 23" 1134080 1134081 Back Height Back CanePush Handle Straight Right Back CanePush Handle Straight Left Back CanePush Handle 10 Deg. Bend Right Back CanePush Handle 10 Deg. Bend Left 1133793 1133795 1143334 1133794 1133796 1143335 1133822 1133824 1133823 1133825 See Note(s) B See Note(s) B 1133826 1133827 1133799 1133801 1133800 1133802 1133828 1133829 See Note(s) C See Note(s) C 1133830 1133831 1136011 1136012 See Note(s) A See Note(s) A 1133832 1133833 1133834 1133835 1133837 1133838 1136013 1136014 See Note(s) A See Note(s) A 1136015 1136016 See Note(s) A See Note(s) A 103 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Canes and Spreader Bars For ADJASBA Seat (16"-22" Wide) After 7/4/05 Contoura, Curve Contoura, Conventional Backs 16"-22" Wide for ADJASBA Seating do not utilize a Spreader Bar Assembly. #1 Back Cane Assemblies Back Height Back CaneNo Push Handle 10 Deg. Bend Right Back CaneNo Push Handle 10 Deg. Bend Left 24" 1134082 1134083 NOTE: Back CanePush Handle Straight Right Back CanePush Handle Straight Left 1136017 1136018 Back CanePush Handle 10 Deg. Bend Right Back CanePush Handle 10 Deg. Bend Left 1133839 1133840 See Note(s) A See Note(s) A A - 21"-24" High Straight Back Canes with Push Handles are only offered On-Chair when the Back Upholstery is omitted B - Wheelchairs manufactured before 5/15/09 with a Contoura Back 25" or 29" high and wheelchairs manufactured after 5/14/09 with a Curve Contoura Back 22" high will use the 18" high Straight Back Cane w/ Push Handle. C - Wheelchairs manufactured after 5/14/09 with a Curve Contoura Back 25" or 28" high will use the 20" high Straight Cane w/ Push Handle. NOTE: Back Cane Assemblies include Foam Grips and Plug Buttons where shown 104 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Cane Attaching Hardware For ADJASBA Seat (16"-22" Wide) After 7/4/05 105 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Cane Attaching Hardware For ADJASBA Seat (16"-22" Wide) After 7/4/05 Item Number Note 1 2 3 4 5 6 NOTE: A Quantity Per Part Number 1133755 Description Package Assembly Kit, Back Cane Mounting Hardware (Pair) Screw, Hex Head (5/16-18 x 1") Washer, Flat (21/64 x 53/64 x 7/64") Locknut (5/16-18) Locknut (5/16-24) Screw w/ Lug (5/16-24 x 1-3/8") A - Includes items 2-6 106 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 2 1 1 1 1 1 1 4 4 4 2 2 Solid Straight Back Canes w/o Push Handles and Mounting Hardware Conventional Tilt and Tilt w/ BPO Option 107 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Solid Straight Back Canes w/o Push Handles and Mounting Hardware Conventional Tilt and Tilt w/ BPO Option Item Number Note Quantity Per 1 A,B Part Number 1128394-NLA 1 A,B 1128395-NLA 1 A 1128396-NLA C 1027097 1125733 2 3 4 5 6 4 5 6 NOTE: 1079247 1028478 1026158 Description Package Assembly NLA - Kit, Back Cane w/o Push Handle, Solid Straight w/ Plug Button - Right NLA - Kit, Back Cane w/o Push Handle, Solid Straight w/ Plug Button - Left NLA - Kit, Back Canes w/o Push Handle, Solid Straight w/ Plug Button (Pair) Plug Button, Black (3/4") Kit, Solid Straight Back Cane w/o Push Handle, Mounting Hardware Washer, Flat (21/64 x 53/64 x 7/64") Screw, Hex Head (5/16-18 x 1") Locknut (5/16-18) Washer, Flat (21/64 x 53/64 x 7/64") Screw, Hex Head (5/16-18 x 1-1/4") Locknut (5/16-18) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 A - Back height from the seat pan to the top of the back cane will measure approximately 20-1/2" high. B - After 4/3/05 ALL Solid Straight Back Canes have a hole bored out to accommodate a Push Handle Attachment Option. For chairs manufactured before 4/4/05 it is recommended to order back canes in pairs to match. C - Includes items 4-6 108 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Canes, Slide Blocks and Sleeves For Conventional Recline, BPO Recline & Tilt/Recline Extruded Back Cane material comes in one height only and measures approximately 20-1/2" and the overall back height from the seat pan to the top of the extruded cane measures approximately 22-1/2" high. Only the Back Assembly needs to be replaced when changing back heights. 109 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Canes, Slide Blocks and Sleeves For Conventional Recline, BPO Recline & Tilt/Recline Extruded Back Cane material comes in one height only and measures approximately 20-1/2" and the overall back height from the seat pan to the top of the extruded cane measures approximately 22-1/2" high. Only the Back Assembly needs to be replaced when changing back heights. Item Number Note Quantity Per 1 1 2 3 4 5 Part Number 1122263 1124693 1000212 1122464 1119847 1122560 6 7 8 1062604 1025704 1026158 Description Package Assembly Block, Slide Back - Left Block, Slide Back - Right Screw, Shoulder Hex Socket (1/4 x 1-1/4", #10-24) Sleeve, Back Slide (15-1/4" L) Pin, Roll (1/8 x 1") Cane, Back, Extruded Conventional, Black Right/Left Screw, Shoulder Hex Socket (3/8 x 1-1/4", 5/16-18) Washer, Flat (5/16 x 5/8 x 1/16") Locknut (5/16-18) 110 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 2 2 2 2 1 1 1 2 2 2 Back Frame, Slide Blocks and Sleeves For Contoura Seating Back Cane material height measures approximately 20-1/2" and the overall back height from the seat pan to the top of the extruded cane measures approximately 23" high. Only the Back Assembly needs to be replaced when changing back heights. 111 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Frame, Slide Blocks and Sleeves For Contoura Seating Back Cane material height measures approximately 20-1/2" and the overall back height from the seat pan to the top of the extruded cane measures approximately 23" high. Only the Back Assembly needs to be replaced when changing back heights. Item Number Note 1 1 2 3 4 5 5 5 5 5 6 7 8 Quantity Per Part Number 1122263 1124693 1000212 1122464 1119847 1131422 1122459 1122463 1131423 1131424 1062604 1025704 1026158 Description Package Assembly Block, Slide Back - Left Block, Slide Back - Right Screw, Shoulder Hex Socket (1/4 x 1-1/4", #10-24) Sleeve, Back Slide (15-1/4" L) Pin, Roll (1/8 x 1") Frame, Back, Contoura, Black (16" W) Frame, Back, Contoura, Black (18" W) Frame, Back, Contoura, Black (20" W) Frame, Back, Contoura, Black (22" W) Frame, Back, Contoura, Black (24" W) Screw, Shoulder Hex Socket (3/8 x 1-1/4", 5/16-18) Washer, Flat (5/16 x 5/8 x 1/16") Locknut (5/16-18) 112 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 1 1 1 2 2 2 Spreader Bar Assembly, Double For Conventional Tilt w/ Vent and Tilt w/ BPO Option 113 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Spreader Bar Assembly, Double For Conventional Tilt w/ Vent and Tilt w/ BPO Option Item Number Note 1 1 1 1 1 1 1 1 1 2 3 4 5 Quantity Per Part Number 0013602 0013702 0013802 0013902 0014002 0014102 0014202 0284202-NLA 0284302-NLA 1125761 Description Package Assembly Bar, Push, Black (16" W) Bar, Push, Black (17" W) Bar, Push, Black (18" W) Bar, Push, Black (19" W) Bar, Push, Black (20" W) Bar, Push, Black (21" W) Bar, Push, Black (22" W) NLA - Bar, Push, Black (23" W) NLA - Bar, Push, Black (24" W) Kit, Double Spreader Bar Mounting Hardware Screw, Socket Head (1/4-20 x 5/8") Half Clamp, Threaded Holes (7/8" Dia. Back Canes) Half Clamp, Un-Threaded Holes (7/8" Dia. Back Canes) 114 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 2 1 2 Spreader Bar Assembly Conventional Tilt without Vent 115 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Spreader Bar Assembly Conventional Tilt without Vent Item Number Note 1 2 3 4 5 6 7 1 2 3 4 5 6 7 8 9 NOTE: Quantity Per A Part Number 1125709 A 1125710 1025730 1031026 Description Package Assembly Kit, Spreader Bar Assembly (16"-20" Wide) NLA - Handle, Spreader Bar, Black Screw, Hex Head (1/4-20 x 1-1/2") Spacer, Coved (1/4 x 11/16 x 1/2") Anti-Rattle (1") Tube, Spreader Bar, Adjustable, Black (16 - 20" W) Locknut (1/4-20) Kit, Spreader Bar Assembly 20"-24" Wide NLA - Handle, Spreader Bar, Black Screw, Hex Head (1/4-20 x 1-1/2") Spacer, Coved (1/4 x 11/16 x 1/2") Anti-Rattle (1") Tube, Spreader Bar, Adjustable, Black (20 - 24" W) Locknut (1/4-20) Locknut (5/16-24) Screw w/ Lug (5/16-24 x 1-3/8") A - Includes items 2-7 116 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 2 1 2 1 2 2 4 2 1 2 2 2 Spreader Bar Assembly Contoura Tilt, Recline and Tilt/Recline 117 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Spreader Bar Assembly Contoura Tilt, Recline and Tilt/Recline Item Number Note 1 1 2 A Quantity Per Part Number 1122469 1125788-NLA 1125765 3 4 5 NOTE: Description Package Assembly Spreader Bar Assembly, Contoura w/o Vent NLA - Spreader Bar Assembly, Contoura w/ Vent Kit, Spreader Bar Mounting Hardware For Extruded Back Canes Screw, Hex Head w/ Patch (1/4-20 x 1/2") Washer (1/4 x 1/2 x 1/16") T-Nut (1/4-20) A - Includes items 3-5 118 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 8 8 8 Spreader Bar Assembly Conventional Recline and Tilt/Recline 119 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Spreader Bar Assembly Conventional Recline and Tilt/Recline Item Number Note 1 2 3 4 5 A B Quantity Per Part Number 1125765 1125766 6 7 8 9 10 10 5 B 1125767-NLA 6 7 8 9 10 10 5 B 1125768 6 7 8 9 10 10 5 B 6 7 1125769-NLA Description Package Assembly Kit, Spreader Bar Mounting Hardware For Extruded Back Canes Screw, Hex Head w/ Patch (1/4-20 x 1/2") Washer (1/4 x 1/2 x 1/16") T-Nut (1/4-20) Kit, Spreader Bar Assembly For Conventional Recline, T/R, 16"-20" Wide w/o Vent NLA - Center Spreader Bar Assembly w/o Vent (16 20" W) Screw, Socket Head (5/16-18 x 1-1/2") Washer, Flat (5/16 x 5/8 x 1/16") Locknut (5/16-18) NLA - Bracket, Straight Outer Spreader Bar - Right For 16"-20" Wide NLA - Bracket, Straight Outer Spreader Bar, Black Left (16-20" W) Kit, Spreader Bar Assembly For Conventional Recline, T/R, 16"-20" Wide w/ Vent NLA - Center Spreader Bar Assembly w/ Vent (16 20" W) Screw, Socket Head (5/16-18 x 1-1/2") Washer, Flat (5/16 x 5/8 x 1/16") Locknut (5/16-18) NLA - Bracket, Straight Outer Spreader Bar - Right For 16"-20" Wide NLA - Bracket, Straight Outer Spreader Bar, Black Left (16-20" W) NLA - Kit, Spreader Bar Assembly For Conventional Recline, T/R, 20"-24" Wide w/o Vent NLA - Center Spreader Bar Assembly w/o Vent (20 24" W) Screw, Socket Head (5/16-18 x 1-1/2") Washer, Flat (5/16 x 5/8 x 1/16") Locknut (5/16-18) NLA - Bracket, Straight Outer Spreader Bar, Black Right (20-24" W) NLA - Bracket, Straight Outer Spreader Bar, Black Left (20-24" W) Kit, Spreader Bar Assembly For Conventional Recline, T/R, 20"-24" Wide w/ Vent NLA - Center Spreader Bar Assembly w/ Vent (20 24" W) Screw, Socket Head (5/16-18 x 1-1/2") 120 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 8 8 8 1 1 1 1 1 1 1 4 4 4 1 1 1 1 1 1 1 1 1 1 1 4 4 4 1 1 1 1 1 1 1 1 1 1 1 4 4 4 1 1 1 1 1 1 1 1 4 Spreader Bar Assembly Conventional Recline and Tilt/Recline Item Number Note Quantity Per Part Number 8 9 10 Package Assembly Washer, Flat (5/16 x 5/8 x 1/16") Locknut (5/16-18) NLA - Bracket, Straight Outer Spreader Bar, Black Right (20-24" W) NLA - Bracket, Straight Outer Spreader Bar, Black Left (20-24" W) 10 NOTE: Description A - Includes items 2-4 B - Includes items 6-10 121 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 4 4 1 1 1 Fixed Height Arms without Mounting Hardware Elevate Only or Tilt Seating 122 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Fixed Height Arms without Mounting Hardware Elevate Only or Tilt Seating #1 Arms Less Pad 16-19" Deep Seat Frames Arm Style Desk Length Full Length Right 1068566-NLA 1068559-NLA Left 1068567-NLA 1068560-NLA #1 Arms Less Pad 20" and Deeper Seat Frames Arm Style Desk Length Full Length Right 1068540-NLA 1068528-NLA 123 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Left 1068541-NLA 1068529-NLA Fixed Height Arms without Mounting Hardware Elevate Only or Tilt Seating Item Number Note 1 1 2 A C 2 2 Quantity Per Part Number See Chart See Chart 1117328 1110818 C 2 1117327 1110817 2 B 1082910 2 B 1082911 2 B 1090190 2 B 1082912 2 B 1082913 2 B 1090191 3 3 1068564 1068565-NLA 3 A 1068414-NLA 3 A 1068415-NLA 3 3 1068490 1068491-NLA 3 A 1068473-NLA 3 A 1068474-NLA A 1032244 1025729 1035472-NLA 1044572-NLA 1044005-NLA 4 5 6 6 6 7 1035065 Description Package Assembly Arms Less Pad, 16-19" Deep Seat Frames Arms Less Pad, 20" and Deeper Seat Frames Kit, Arm Pad w/ Screws, Full Length, Urethane Waterfall, Black (13" L x 2-5/8" W) Kit, Arm Pad w/ Screws, Full Length, Urethane Waterfall, Black (13" L x 2-5/8" W) (Pair) Kit, Arm Pad w/ Screws, Desk Length, Urethane Waterfall, Black (9" L x 2-5/8" W) Kit, Arm Pad w/ Screws, Desk Length, Urethane Waterfall, Black (9" L x 2-5/8" W) (Pair) Pad, Arm w/ Elbow Stop, Desk Length, Urethane, Black - Right (13" L x 3" W) Pad, Arm w/ Elbow Stop, Desk Length, Urethane, Black - Left (13" L x 3" W) Kit, Arm Pad w/ Screws and Elbow Stop, Desk Length, Urethane, Black (13" L x 3" W) (Pair) Pad, Arm w/ Elbow Stop, Full Length, Urethane, Black - Right (17" L x 3" W) Pad, Arm w/ Elbow Stop, Full Length, Urethane, Black - Left (17" L x 3" W) Kit, Arm Pad w/ Screws and Elbow Stop, Full Length, Urethane, Black (17" L x 3" W) (Pair) Tube, Arm, Desk Length, Black - Right (16-19" D) NLA - Tube, Arm, Desk Length, Black - Left (16-19" D) NLA - Tube, Arm, Desk Length, Long, Black - Right (20" and Deeper) NLA - Tube, Arm, Desk Length, Long, Black - Left (20" and Deeper) Tube, Arm, Full Length, Black - Right (16-19"D) NLA - Tube, Arm, Full Length, Black - Left (16 19"D) NLA - Tube, Arm, Full Length, Long, Black - Right (20" and Deeper) NLA - Tube, Arm, Full Length, Long, Black - Left (20" and Deeper) Grip, Foam Hand (9" L) Screw, Phillips Pan Head Tap (#8-32 x 3/8") NLA - Guard, Clothing, Desk Length NLA - Guard, Clothing, Full Length (16 - 19" D) NLA - Guard, Clothing, Full Length (20" and Deeper) Cover, Clothing Guard w/ Pocket, FXDESK & ADJFULL/ADJDESK 124 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 2 1 1 1 2 1 1 1 1 1 2 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 1 1 1 1 1 Fixed Height Arms without Mounting Hardware Elevate Only or Tilt Seating Item Number Note 7 A Quantity Per Part Number 1044588 8 1094270 9 10 1065936 1067734 NOTE: Description Package Assembly Cover, Clothing Guard with Pocket Fixed Height Full Length (20" and Deeper) Package, Screw, Phillips Pan Head (#10-32 x 1-1/4") Plug, Pivot Plug Button, Black (5/8") 1 1 2 1 1 1 2 2 A - The ADJASBA seat frame for 19-22" depths including the Tilt Only System must use the 16-19" deep arms only. B - Arm Pads w/ Elbow Stop is used for Formula Tilt Only systems C - After 7/9/07 Invacare recommends ordering armpads in pairs to assure uniform appearance on chair 125 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Adjustable Height Arms without Mounting Hardware Elevate Only or Tilt Seating 126 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Adjustable Height Arms without Mounting Hardware Elevate Only or Tilt Seating Item Number Note Quantity Per 1 Part Number 1117328 1 1110818 1 1117327 1 1110817 1 B 1082910 1 B 1082911 1 B 1090190 1 B 1082912 1 B 1082913 1 B 1090191 2 1071253 2 1070859 3 4 1027095 1094270 5 6 7 8 9 10 11 12 13 13 13 13 13 1064130 47471X074 1028594 1032244 1090768 1028645 1065936 1067734 1068416 1068417 1068418 1068419 1067761 A A 13 1067762 Description Package Assembly Kit, Arm Pad w/ Screws, Full Length, Urethane Waterfall, Black (13" L x 2-5/8" W) Kit, Arm Pad w/ Screws, Full Length, Urethane Waterfall, Black (13" L x 2-5/8" W) (Pair) Kit, Arm Pad w/ Screws, Desk Length, Urethane Waterfall, Black (9" L x 2-5/8" W) Kit, Arm Pad w/ Screws, Desk Length, Urethane Waterfall, Black (9" L x 2-5/8" W) (Pair) Pad, Arm w/ Elbow Stop, Desk Length, Urethane, Black - Right (13" L x 3" W) Pad, Arm w/ Elbow Stop, Desk Length, Urethane, Black - Left (13" L x 3" W) Kit, Arm Pad w/ Screws and Elbow Stop, Desk Length, Urethane, Black (13" L x 3" W) (Pair) Pad, Arm w/ Elbow Stop, Full Length, Urethane, Black - Right (17" L x 3" W) Pad, Arm w/ Elbow Stop, Full Length, Urethane, Black - Left (17" L x 3" W) Kit, Arm Pad w/ Screws and Elbow Stop, Full Length, Urethane, Black (17" L x 3" W) (Pair) Arm Tube Assembly w/ Plug Buttons, Full Length, Black - Right/Left Arm Tube Assembly w/ Plug Buttons, Desk Length, Black - Right/Left Plug Button, Black (7/8") Package, Screw, Phillips Pan Head (#10-32 x 1-1/4") Guard, Clothing Spring, Arm Lock Pin, Arm Lock, Black Grip, Foam Hand (9" L) Kit, Lock Handle w/Rivets (Pair) Rivet Plug, Pivot Plug Button, Black (5/8") Arm Base Assembly, Black - Right (16-19" D) Arm Base Assembly, Black - Left (16-19" D) Arm Base Assembly, Black - Right (20" and Deeper) Arm Base Assembly, Black - Left (20" and Deeper) Arm Base Assembly, 1" Lower, Black - Right (16-19" D) Arm Base Assembly, 1" Lower, Black - Left (16-19" D) 127 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 2 1 1 1 2 1 1 1 1 1 2 1 1 1 1 1 2 1 1 1 1 1 1 2 2 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 6 2 2 1 1 1 1 1 1 1 Adjustable Height Arms without Mounting Hardware Elevate Only or Tilt Seating Item Number Note Quantity Per 13 A Part Number 1067755 13 A 1067756 14 NOTE: 1035065 Description Package Assembly Arm Base Assembly, 1" Lower, Black - Right (20" and Deeper) Arm Base Assembly, 1" Lower, Black - Left (20" and Deeper) Cover, Clothing Guard w/ Pocket, FXDESK & ADJFULL/ADJDESK 1 1 1 1 1 1 A - The ADJASBA seat frame for 19-22" depths including the Tilt Only System must use the 16-19" deep arms only. B - Arm Pads w/ Elbow Stop is used for Formula Tilt Only systems 128 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Recline and Tilt/Recline Arms without Mounting Hardware 129 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Recline and Tilt/Recline Arms without Mounting Hardware Item Number Note Quantity Per 1 Part Number 1082910 1 1082911 1 1090190 1 1082912 1 1082913 1 1090191 2 A,F 1086992 2 A,F 1086993 2 B,F 1087012 2 B,F 1087013 3 4 5 6 7 8 8 9 10 11 12 13 14 15 16 17 C D G E NOTE: 1008432 1026103 0028202 1027095 1107155 1028755 1107155 1079203 1115392 1115393-NLA 1082842 7930333 1082927 1091870 1095437 1165484-NLA 1119268-NLA Description Package Assembly Pad, Arm w/ Elbow Stop, Desk Length, Urethane, Black - Right (13" L x 3" W) Pad, Arm w/ Elbow Stop, Desk Length, Urethane, Black - Left (13" L x 3" W) Kit, Arm Pad w/ Screws and Elbow Stop, Desk Length, Urethane, Black (13" L x 3" W) (Pair) Pad, Arm w/ Elbow Stop, Full Length, Urethane, Black - Right (17" L x 3" W) Pad, Arm w/ Elbow Stop, Full Length, Urethane, Black - Left (17" L x 3" W) Kit, Arm Pad w/ Screws and Elbow Stop, Full Length, Urethane, Black (17" L x 3" W) (Pair) Arm Assembly w/o Arm Pad, Desk Length, Black Right Arm Assembly w/o Arm Pad, Desk Length, Black Left Arm Assembly w/o Arm Pad, Full Length, Black Right Arm Assembly w/o Arm Pad, Full Length, Black Left Screw, Socket Button Head (1/4-20 x 1-1/4") Washer, Nylon (1/4 x 1/2 x 1/32") Tube, Extension, Full Length Plug Button, Black (7/8") Screw, Phillips Pan Head Tap (#10-32 x 1-1/4") Screw, Phillips Pan Head (#10-32 x 5/8") Screw, Phillips Pan Head Tap (#10-32 x 1-1/4") Decal, Warning Pinch Point Tube, Arm, Support, Black NLA - Tube, Slide, Adjustable, Black Plug, Arm, Black Locknut (1/4-20) Tube, Arm, Black Screw, Socket Button Head w/ Patch (1/4-20 x 3/4") Arm Pivot Assembly NLA - Washer, Nylon (1/4 x 1/2 x 1/32") NLA - Kit, Slide Tube w/ Arm Support (Pair) 1 1 1 1 2 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 25 1 1 1 1 2 3 2 1 1 2 1 1 1 1 1 1 3 1 1 1 2 1 A - Includes Items 3,4,6, and 9-17. B - Includes Items 3-6 and 8-17. C - Used for full length arms only D - Used for desk length arms only E - Not Shown. Assembly includes 2 ea. of item numbers 9, 10 and 11 F - When placing an order for item 2, you must specify as a note "For Tarsys 2GTR seating" or "For Formula TRE seating". G - The Arm Pivot Assembly Pin faces down for Tarsys 2GTR and faces up for the Formula TRE powered seating 130 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Arm Mounting Swingaway Hardware Elevate Only For ASBA/ADJASBA Seating 131 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Arm Mounting Swingaway Hardware Elevate Only For ASBA/ADJASBA Seating Item Number Note 1 2 3 4 5 NOTE: A Quantity Per Part Number 1068488 1019590 1068025 1025195 1068039 Description Package Assembly Kit, Swingaway Armrest Mounting Hardware Screw, Socket Button Head (1/4-20 x 1-5/8") Clevis, Pivot Locknut (1/4-20) Pin, Pull A - Includes items 2-5 132 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 Front/Rear Arm Socket Assembly and Hardware Elevate Only For ADJASBA Seat (16"-22" Wide) (After 7/4/05) 133 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Front/Rear Arm Socket Assembly and Hardware Elevate Only For ADJASBA Seat (16"-22" Wide) (After 7/4/05) Item Number Note 1 A 2 3 4 5 6 6 7 7 NOTE: Quantity Per Part Number 1125734 1122619 1122620 1125478 1125479 Description Package Assembly Kit, Front/Rear Arm Socket Assembly Mounting Hardware Screw, Hex Head w/ Patch (5/16-18 x 3/4") Washer, Steel (5/16 x 3/4 x 1/16") T-Nut (5/16-18) Screw, Hex Head w/ Patch (5/16-18 x 5/8") Socket, Arm, Front - Right Socket, Arm, Front - Left Bracket, Arm Socket/Cane, Rear - Right Bracket, Arm Socket/Cane, Rear - Left A - Includes items 2-5 134 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 2 4 4 2 1 1 1 1 Arm Mounting Hardware Conventional and Contoura Recline and Tilt/Recline Seating 135 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Arm Mounting Hardware Conventional and Contoura Recline and Tilt/Recline Seating #1 Adapter, Contoura Recline Upper Arm - Before 5/15/09 Adapter Side Contoura - Right Contoura - Left 16" Wide 1131416 1131417 18" Wide 1122582 1125807 20" Wide 1122625 1125808 22" Wide 1131418 1131419 24" Wide 1131420 1131421 #1 Adapter, Curve Contoura Recline Upper Arm - After 5/14/09 Adapter Side Curve Contoura Right Curve Contoura Left 16" Wide 18" Wide 20" Wide 22" Wide 24" Wide 1161802 1161655 1161660 1161796 1161820 1161803 1161656 1161661 1161797 1161821 136 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Arm Mounting Hardware Conventional and Contoura Recline and Tilt/Recline Seating Item Number Note Quantity Per 1 Part Number See Chart 1 See Chart 1 1 2 3 1122595 1125809 1006490 1124682 3 4 5 6 7 A A B 8 9 10 11 12 13 14 15 NOTE: 1124683 1028594 47471X074 1090768 1125735 Description Package Assembly #1 Adapter, Contoura Recline Upper Arm - Before 5/15/09 #1 Adapter, Curve Contoura Recline Upper Arm After 5/14/09 Adapter, Conventional Recline Upper Arm - Right Adapter, Conventional Recline Upper Arm - Left Tip, Plastic, Black Recline Arm Socket Bracket Assembly, Black Right Recline Arm Socket Bracket Assembly, Black - Left Pin, Arm Lock, Black Spring, Arm Lock Kit, Lock Handle w/Rivets (Pair) Kit, Recline Arm Socket Assembly and Upper Arm Adapter Mounting Hardware Screw, Hex Head w/ Patch (1/4-20 x 5/8") Washer (1/4 x 1/2 x 1/16") T-Nut (1/4-20) T-Nut (5/16-18) T-Nut (5/16-18) Screw, Hex Head w/ Patch (5/16-18 x 3/4") Washer, Steel (5/16 x 3/4 x 1/16") NLA - Screw, Socket Flat Head w/ Patch (1/4-20X1/2") A - Includes Recline Arm Socket Bracket and items 4-6. B - Includes items 8-15. 137 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 2 2 2 Arm Mounting Hardware Conventional and Contoura Tilt Seating 138 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Arm Mounting Hardware Conventional and Contoura Tilt Seating Item Number Note 1 1 2 3 4 5 6 7 7 8 9 10 11 12 13 14 15 16 17 NOTE: A B B C Quantity Per Part Number 1125478 1125479 1125734 1122619 1122620 1028594 47471X074 1090768 1125736 Description Package Assembly Bracket, Arm Socket/Cane, Rear - Right Bracket, Arm Socket/Cane, Rear - Left Kit, Front/Rear Arm Socket Assembly Mounting Hardware Screw, Hex Head w/ Patch (5/16-18 x 3/4") Washer, Steel (5/16 x 3/4 x 1/16") T-Nut (5/16-18) Screw, Hex Head w/ Patch (5/16-18 x 5/8") Socket, Arm, Front - Right Socket, Arm, Front - Left Pin, Arm Lock, Black Spring, Arm Lock Kit, Lock Handle w/Rivets (Pair) Kit, Swingaway Armrest Mounting Hardware Pin, Pull Screw, Hex Head w/ Patch (1/4-20 x 3/4") Locknut (1/4-20) Screw, Socket Button Head (1/4-20 x 1-5/8") Clevis, Pivot Washer (1/4 x 1/2 x 1/16") A - Includes items 3-6 B - Includes Front Arm Socket and items 8-10 C - Includes items 12-17 139 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 4 4 2 1 1 1 1 1 1 1 1 2 1 1 1 Contoura Seating Shroud Covers 140 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Contoura Seating Shroud Covers Item Number Note 1 2 4 5 6 7 8 8 9 10 3 4 5 6 7 8 8 9 10 9 11 NOTE: A Quantity Per Part Number 1125705 B 1125728-NLA C 1125704-NLA 1090197 1114308 Description Package Assembly NLA - Kit, Controller and Seat Frame Shroud Covers with Hardware NLA - Cover, Back, Controller Shroud Screw, Button Head w/ Patch (1/4-20 x 1/2") T-Nut (1/4-20) Screw, Phillips Pan Head (#6-32 x 1-1/8") Nut, Hex Lock (#6-32) NLA - Bracket, Shroud, Black - Right NLA - Bracket, Shroud, Black - Left Fastener, Dual Lock (1/2" W x 7/8" L) NLA - Cover Assembly, Seat Frame Shroud Kit, Controller Shroud Mounting Hardware Screw, Button Head w/ Patch (1/4-20 x 1/2") T-Nut (1/4-20) Screw, Phillips Pan Head (#6-32 x 1-1/8") Nut, Hex Lock (#6-32) NLA - Bracket, Shroud, Black - Right NLA - Bracket, Shroud, Black - Left Fastener, Dual Lock (1/2" W x 7/8" L) NLA - Cover Assembly, Seat Frame Shroud Fastener, Dual Lock (1/2" W x 7/8" L) Screw, Phillips Pan Head Tap (#10-32 x 1/2") A - Includes items 2, 4-10 B - Includes items 4-9 C - Includes Shroud Cover, items 9 and 11 141 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 2 2 1 1 8 1 1 4 2 2 2 1 1 4 1 4 2 Conventional Shroud Cover 142 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Conventional Shroud Cover Item Number Note 1 2 3 NOTE: A Quantity Per Part Number 1125704-NLA 1114308 1090197 Description Package Assembly NLA - Cover Assembly, Seat Frame Shroud Screw, Phillips Pan Head Tap (#10-32 x 1/2") Fastener, Dual Lock (1/2" W x 7/8" L) A - Includes the Shroud Cover and items 2-3 143 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 2 8 Shroud Covers Before 3/1/07 Conventional Tilt, Tilt w/ BPO or Tilt-Elevate w/ MK6i Electronics NOTE: MK6i connectors are bundled and cable-tied to the MK6i Connector Shroud Mounting Tray Assembly item #11 144 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Shroud Covers Before 3/1/07 Conventional Tilt, Tilt w/ BPO or Tilt-Elevate w/ MK6i Electronics NOTE: MK6i connectors are bundled and cable-tied to the MK6i Connector Shroud Mounting Tray Assembly item #11 Item Number Note 1 A Quantity Per Part Number 1140266-NLA 2 2 3 4 6 7 8 9 10 11 1 B 1140267-NLA 2 2 3 4 5 6 7 8 9 10 11 12 C 2 2 3 4 6 7 8 9 10 11 1140268 Description Package Assembly NLA - Kit, TRECM/TAC/MK6i Connector Shroud Mtg. Hdwr. 16-20" Wide For Conventional Tilt Only Bracket, Spreader Bar, Black - Right Bracket, Spreader Bar, Black - Left Screw, Hex Head (1/4-20 x 1-1/2") Spacer, Coved (1/4 x 11/16 x 1/2") Tube, Spreader Bar, Black (16 - 20" W) Collar, Anti-Rattle (7/8") Screw, Hex Head (1/4-20 x 5/8") Locknut (1/4-20) Plate, Mounting NLA - TRECM/SAC/TAC/MK6i Connector Shroud Mounting Tray Assembly NLA - Kit, TRECM/TAC/MK6i Connector Shroud Mtg. Hdwr. 20-24" Wide For Conventional Tilt Only Bracket, Spreader Bar, Black - Right Bracket, Spreader Bar, Black - Left Screw, Hex Head (1/4-20 x 1-1/2") Spacer, Coved (1/4 x 11/16 x 1/2") Locknut (1/4-20) Tube, Spreader Bar, Black (20 - 24" W) Collar, Anti-Rattle (7/8") Screw, Hex Head (1/4-20 x 5/8") Locknut (1/4-20) Plate, Mounting NLA - TRECM/SAC/TAC/MK6i Connector Shroud Mounting Tray Assembly NLA - Kit, TRECM/TAC/MK6i Connector Shrouds and Mtg. Hdwr. 16-20" Wide For Conventional Tilt Only NLA - Screw, Phillips Pan Head w/ Patch (#10-32 x 3/8") Bracket, Spreader Bar, Black - Right Bracket, Spreader Bar, Black - Left Screw, Hex Head (1/4-20 x 1-1/2") Spacer, Coved (1/4 x 11/16 x 1/2") Tube, Spreader Bar, Black (16 - 20" W) Collar, Anti-Rattle (7/8") Screw, Hex Head (1/4-20 x 5/8") Locknut (1/4-20) Plate, Mounting NLA - TRECM/SAC/TAC/MK6i Connector Shroud Mounting Tray Assembly 145 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 1 2 2 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 8 2 1 2 2 4 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 4 1 2 2 4 1 1 Shroud Covers Before 3/1/07 Conventional Tilt, Tilt w/ BPO or Tilt-Elevate w/ MK6i Electronics NOTE: MK6i connectors are bundled and cable-tied to the MK6i Connector Shroud Mounting Tray Assembly item #11 Item Number Note 13 14 15 16 12 D Quantity Per Part Number 1140269 2 2 3 4 5 6 7 8 9 10 11 13 14 15 16 E NOTE: 1095502-NLA Description Package Assembly Screw, Thumb (#10-32 x 1/2") NLA - Shroud, Cover Shroud, Back Screw, Phillips Pan Head Tap (#10-32 x 1/2") NLA - Kit, TRECM/TAC/MK6i Connector Shrouds and Mtg. Hdwr. 20-24" Wide For Conventional Tilt Only NLA - Screw, Phillips Pan Head w/ Patch (#10-32 x 3/8") Bracket, Spreader Bar, Black - Right Bracket, Spreader Bar, Black - Left Screw, Hex Head (1/4-20 x 1-1/2") Spacer, Coved (1/4 x 11/16 x 1/2") Locknut (1/4-20) Tube, Spreader Bar, Black (20 - 24" W) Collar, Anti-Rattle (7/8") Screw, Hex Head (1/4-20 x 5/8") Locknut (1/4-20) Plate, Mounting NLA - TRECM/SAC/TAC/MK6i Connector Shroud Mounting Tray Assembly Screw, Thumb (#10-32 x 1/2") NLA - Shroud, Cover Shroud, Back Screw, Phillips Pan Head Tap (#10-32 x 1/2") NLA - Package, Tie Wrap (11-1/2" L) 1 1 1 1 1 1 1 1 4 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 4 8 2 1 2 2 4 1 1 1 1 1 1 10 1 1 1 4 1 A - Includes items 2-4 and 6-11 B - Includes items 2-12 C - Includes (part #1079316 Screw - Not Shown and not used for MK6i application) and items 2-4, 6-11 and 13-16 D - Includes (part #1079316 Screw - Not Shown and not used for MK6i application) and items 2-11 and 13-16 E - Not Shown 146 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Shroud Cover After 2/28/07 Conventional Tilt, Tilt w/ BPO or Tilt-Elevate w/ MK6i Electronics 147 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Shroud Cover After 2/28/07 Conventional Tilt, Tilt w/ BPO or Tilt-Elevate w/ MK6i Electronics Item Number Note 1 2 2 3 4 6 7 8 9 10 11 12 1 2 2 3 4 5 6 7 8 9 10 11 12 12 13 14 15 NOTE: C,A C,B C Quantity Per Part Number 1148231 1148232 1154125 1117240 1148151 1095502-NLA Description Package Assembly Kit, MK6i Connector Shroud Mtg. Hdwr. 16-20" Wide For Conventional Tilt Only Bracket, Spreader Bar, Black - Right Bracket, Spreader Bar, Black - Left Screw, Hex Head (1/4-20 x 1-1/2") Spacer, Coved (1/4 x 11/16 x 1/2") Tube, Spreader Bar, Black (16 - 20" W) Collar, Anti-Rattle (7/8") Screw, Hex Head (1/4-20 x 5/8") Locknut (1/4-20) Plate, Mounting Tray, MK6i Connector Shroud Mounting Bracket, MK6i Connector, Black Kit, MK6i Connector Shroud Mtg. Hdwr. 20-24" Wide For Conventional Tilt Only Bracket, Spreader Bar, Black - Right Bracket, Spreader Bar, Black - Left Screw, Hex Head (1/4-20 x 1-1/2") Spacer, Coved (1/4 x 11/16 x 1/2") Locknut (1/4-20) Tube, Spreader Bar, Black (20 - 24" W) Collar, Anti-Rattle (7/8") Screw, Hex Head (1/4-20 x 5/8") Locknut (1/4-20) Plate, Mounting Tray, MK6i Connector Shroud Mounting Bracket, MK6i Connector, Black Kit, MK6i Connector Bracket and Threaded Insert Screw, Thumb (#10-32 x 1/2") Shroud, MK6i Connector NLA - Package, Tie Wrap (11-1/2" L) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 1 2 4 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 1 1 4 8 2 1 2 4 6 1 1 1 1 1 1 1 A - Includes items 2-4 and 6-12 B - Includes items 2-12 C - Item 12 MK6i Connector Bracket was revised 4/28/08 and is backward compatible. When a new MK6i Connector Bracket is requested, order service part # 1154125. 148 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Shroud Covers Recline & Tilt/Recline Conventional or Contoura Seating w/ MK6i Electronics 149 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Shroud Covers Recline & Tilt/Recline Conventional or Contoura Seating w/ MK6i Electronics Item Number Note 1 1 1 2 3 Quantity Per Part Number 1146501-NLA 1146502-NLA 1146503-NLA 1090147-NLA 1117240 Description Package Assembly NLA - Cover with Decal, Contoura (16 - 24" W) NLA - Cover with Decal, Conventional (16 - 20" W) NLA - Cover with Decal, Conventional (20 - 24" W) NLA - Decal, Invacare Medallion - Large Screw, Thumb (#10-32 x 1/2") 150 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 MK6i Electronics 151 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com MK5 Electronics 152 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Front Riggings 153 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Arm Pads Otto Bock Channel Forearm Pads include all hardware and Instructions for attaching to a wheelchair or Elevating Swivel Unit. Hardware to attach a Hand Pad to the Channel Forearm Pad comes with the Channel Forearm Pad only. The Channel Forearm Pad hardware is not sold separately. 154 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Arm Pads Otto Bock Channel Forearm Pads include all hardware and Instructions for attaching to a wheelchair or Elevating Swivel Unit. Hardware to attach a Hand Pad to the Channel Forearm Pad comes with the Channel Forearm Pad only. The Channel Forearm Pad hardware is not sold separately. Item Number Note 1 2 3 4 5 6 7 7 8 9 10 10 NOTE: A Quantity Per Part Number 0020700 0023000 0021700 0020600 0023300 0020500 0021600 0021500 1166835 0020400 0164900 0164800 Description Package Assembly Pad, Small Channel Forearm Pad, Flat Hand - Large Kit, Hand/ Forearm Pad Strap Pad, Medium Channel Forearm Pad, Flat Hand - Medium Pad, Large Channel Forearm Pad, Palm Extensor Hand - Right Pad, Palm Extensor Hand - Left Unit, Elevating Swivel - Right/Left (7/8") Pad, One Piece Channel Forearm Pad, Cone Hand - Right Pad, Cone Hand - Left 1 1 1 1 1 1 1 1 1 1 1 1 A - 0021400 Unit, Elevating Swivel - Right (7/8") and 0021300 Unit, Elevating Swivel - Left (7/8") are replaced with part number 1166835. The new Unit can be used on the right or left side of the wheelchair. 155 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 Back Cane Push Handle Attachments Conventional Tilt and Tilt w/ BPO Option 156 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Cane Push Handle Attachments Conventional Tilt and Tilt w/ BPO Option Item Number Note 1 2 3 4 5 6 7 NOTE: A Quantity Per Part Number 1133259 Description Package Assembly Kit, Back Cane Push Handle Attachments (Pair) Grip, Foam, Hand (4-1/2" L) Plug Button, Black (7/8") Attachment, Back Cane Push Handle Screw, Hex Head (1/4-20 x 1-1/4") Spacer (1/4 x 3/8 x 3/16") Locknut (1/4-20) 1 1 1 1 1 1 1 A - Includes items 2-7. For chairs manufactured before 4/4/05, new back canes may be required. See page titled "Back Canes, Solid Straight and Mounting Hardware, Conventional Tilt and Tilt w/ BPO Option" 157 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 2 2 2 4 4 4 Back Cane Push Handle Attachments Contoura Seating 158 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Back Cane Push Handle Attachments Contoura Seating Item Number Note 1 2 3 4 5 NOTE: A Quantity Per Part Number 1125706 Description Package Assembly Kit, Back Cane Push Handle Attachments (Pair) Attachment, Back Cane Push Handle Locknut (1/4-20) Spacer (1/4 x 3/8 x 3/16") Screw, Hex Head (1/4-20 x 1-1/4") A - Includes items 2-5 159 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 2 4 4 4 Headrest Support Assembly, Tarsys 160 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Headrest Support Assembly, Tarsys Item Number Note Quantity Per 1 1 1 Part Number 0127700 0128000-NLA 0022600 1 0022400 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 NOTE: A B C,E D D 0197024 0271524-NLA 1077076-NLA 0271124-NLA 0288606 0271224 0271324 1027268 0271424-NLA 0283724 0067006-NLA 1124686 0273100 0237422-NLA 0237522-NLA 1072439-NLA 0288706 1025736 Description Package Assembly Headrest, Curved (6" W x 7" H) NLA - Headrest, Two-Step (8-1/2" W x 5-1/2" H) Kit, Headrest w/ Screws, Adjustable, Small, Otto Bock (9" W x 3-1/2" H) Kit, Headrest w/ Screws, Adjustable, Large, Otto Bock (12" W x 6" H) Fixture Assembly, Offset Support NLA - Tube, Offset Fixture, Black NLA - Plug Button, Square (1/2") NLA - Collar, Offset Fixture Tube Screw, Set Socket Cup Point (#10-24 x 3/16") Half Clamp, Non-Threaded Holes Half Clamp, Threaded Holes Screw, Allen Head (1/4-20 x 1") NLA - Tube, Fixture Adjustment Ring, Fixture Clamp NLA - Screw, Cap, Socket Head (#10-32 x 1/2") Kit, Headrest Mounting Hardware Kit, Headrest Clamp, Lever Style NLA - Clamp, Small Bottom Half NLA - Clamp, Small Top Half NLA - Knob, Adjustment, Black (3/4" L Threads) Screw, Socket, Flat Head (1/4-20 x 1") Locknut (1/4-20) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 3 1 1 3 1 1 1 1 1 2 2 A - Includes items 3-12 B - Individual components are not available. The Headrest Mounting Hardware Kit was revised to include a Wire Guard Bracket and is used for Conventional and Contoura Backs. The Headrest Mounting Hardware Kit is also backward compatible in the field. C - Includes items 15-19. Item 17 Adjustment Knob was replaced with an Adjustment Lever. The Lever is not available as a separate part. The knob Part # 1072439 is interchangeable with the Lever. D - Clamp is no longer available individually. See item 14 Clamp Assembly part number 0273100. E - Hardware can also be used with an Invacare Personal Back. 161 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Headrest Support Assembly, Stealth CP175/CP275/CP180/CP280 162 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Headrest Support Assembly, Stealth CP175/CP275/CP180/CP280 Item Number Note Quantity Per 1 A,H Part Number 1127408-NLA 1 A,H 1127409-NLA 1 A,H 1127410-NLA 1 A 1127411-NLA 2 3 4 5 6 7 8 9 B B,C D,F,G E E 1124686 1127414 0273100 0237422-NLA 0237522-NLA 1072439-NLA 0288706 1025736 NOTE: Description Package Assembly NLA - Kit, Headrest 10" TWB Comfort Plus Stealth (CP280) NLA - Kit, Headrest 14" TWB Comfort Plus Stealth (CP180) NLA - Kit, Headrest 10" Multi-Axis Comfort Plus Stealth (CP275) NLA - Kit, Headrest 14" Multi-Axis Comfort Plus Stealth (CP175) Kit, Headrest Mounting Hardware Kit, Link Extension Stealth Kit, Headrest Clamp, Lever Style NLA - Clamp, Small Bottom Half NLA - Clamp, Small Top Half NLA - Knob, Adjustment, Black (3/4" L Threads) Screw, Socket, Flat Head (1/4-20 x 1") Locknut (1/4-20) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 A - The mounting hardware will contain a lever and star knob tightening device. Disregard the lever that is provided standard by stealth and use the star knob designed for the Formula TRE systems. B - Individual components are not available. The Headrest Mounting Hardware Kit was revised to include a Wire Guard Bracket and is used for Conventional and Contoura Backs. The Headrest Mounting Hardware Kit is also backward compatible in the field. C - The Stealth Link Extension used on the Stealth Comfort Plus TWB models only D - Includes items 5-9. Item 7 Adjustment Knob was replaced with an Adjustment Lever. The Lever is not available as a separate part. The knob Part # 1072439 is interchangeable with the Lever. E - Clamp is no longer available individually. See item 4 Clamp Assembly part number 0273100. F - Hardware can also be used with an Invacare/Matrx Personal Back, Matrx PB Posture Back and Matrx Elite Backs. G - For Matrx Elite Backs, item #4 Headrest Clamp Kit attaches to an Adapter Plate that is only included with the Adapter Plate Kit model numbers EHRA-S, EHRA-M or EHRA-L. Refer to the Matrx Rehab Seating and Postioning Pricelist for additional information. H - Stealth Headrest No Longer Available. See page titled "Headrest Support Assembly - Matrx Elan MEHSP-10, 14" for replacement. 163 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Headrest Support Assembly - Matrx Elan (MEHSP-10,14) Item Number Note 1 1 2 NOTE: A B C Quantity Per Part Number 60102830 60102833 60102826 Description Package Assembly Kit, Matrx Elan Standard Headrest Pad (10" W) Kit, Matrx Elan Standard Headrest Pad (14" W) Kit, Elan Multi-Axis Articulating Headrest Mounting Hardware A - For model MEHSP-10 B - For model MEHSP-14 C - For model MEMAH 164 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 Lateral Support Assembly, Tarsys TMSLM/TMSLL Conventional Tilt and Tilt w/ BPO Option 165 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Lateral Support Assembly, Tarsys TMSLM/TMSLL Conventional Tilt and Tilt w/ BPO Option Item Number Note 1 3 4 5 6 7 7 8 9 11 12 13 14 15 1 3 4 5 6 7 7 8 9 11 12 13 14 15 2 3 4 5 6 7 8 9 11 12 13 2 A A B B Quantity Per Part Number 1107298 1107299 1107245 1107246 Description Package Assembly Kit, Swingaway Lateral Support Assemblies w/ Medium Pads (Pair) Bracket, Extension Offset, Black (2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (1/2") Bracket, Flush Mount, Black Bracket, Swingaway, Cane Clamp, Black - Right Bracket, Swingaway, Cane Clamp, Black - Left Screw, Socket Flat Head (#10-32 x 1/2") Bracket, Mounting, Black NLA - Screw, Hex Head (1/4-20 x 1-1/8") Half Clamp, Non-Threaded Holes NLA - Half Clamp, Threaded Holes Screw, Socket Flat Head (1/4-20 x 1/2") Pad, Lateral Support - Medium (6" W x 4" H) Kit, Swingaway Lateral Support Assembies w/ Large Pads (Pair) Bracket, Extension Offset, Black (2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (1/2") Bracket, Flush Mount, Black Bracket, Swingaway, Cane Clamp, Black - Right Bracket, Swingaway, Cane Clamp, Black - Left Screw, Socket Flat Head (#10-32 x 1/2") Bracket, Mounting, Black NLA - Screw, Hex Head (1/4-20 x 1-1/8") Half Clamp, Non-Threaded Holes NLA - Half Clamp, Threaded Holes Screw, Socket Flat Head (1/4-20 x 1/2") Pad, Lateral Support - Large (6" W x 5" H) Kit, Swingaway Bracket Assembly with Offset Brackets, Cane Clamp - Right Bracket, Extension Offset, Black (2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (1/2") Bracket, Flush Mount, Black Bracket, Swingaway, Cane Clamp, Black - Right Screw, Socket Flat Head (#10-32 x 1/2") Bracket, Mounting, Black NLA - Screw, Hex Head (1/4-20 x 1-1/8") Half Clamp, Non-Threaded Holes NLA - Half Clamp, Threaded Holes Kit, Swingaway Bracket Assembly with Offset Brackets, Cane Clamp - Left 166 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 1 12 2 6 2 2 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 1 12 2 6 2 2 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1 3 1 1 1 Lateral Support Assembly, Tarsys TMSLM/TMSLL Conventional Tilt and Tilt w/ BPO Option Item Number Note 3 4 5 6 7 8 9 11 12 13 10 11 12 13 NOTE: C Quantity Per Part Number 1107117 Description Package Assembly Bracket, Extension Offset, Black (2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (1/2") Bracket, Flush Mount, Black Bracket, Swingaway, Cane Clamp, Black - Left Screw, Socket Flat Head (#10-32 x 1/2") Bracket, Mounting, Black NLA - Screw, Hex Head (1/4-20 x 1-1/8") Half Clamp, Non-Threaded Holes NLA - Half Clamp, Threaded Holes Kit, Lateral Support Mounting Hardware NLA - Screw, Hex Head (1/4-20 x 1-1/8") Half Clamp, Non-Threaded Holes NLA - Half Clamp, Threaded Holes A - Includes items 3-9 and 11-15 B - Includes items 3-9 and 11-13 C - Includes items 11-13 167 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1 3 1 1 1 3 1 1 Lateral Support Assembly, Stealth TWB-RPR/TWB-RPRL Conventional Tilt & Tilt w/ BPO Option Item Number Note Quantity Per 1 A Part Number 1125826 1 A 1125823 NOTE: Description Package Assembly Kit, Swingaway Lateral Support Assemblies w/ Medium Pads (5" W x 3" H), Stealth (TWB-RPR) (Pair) Kit, Swingaway Lateral Support Assemblies w/ Large Pads (6" W x 4" H), Stealth (TWB-RPRL) (Pair) A - Individual components are not available 168 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 Lateral Support Assembly, Tarsys TMSLM/TMSLL For Conventional Recline, Tilt/Recline & Recline w/ BPO Option 169 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Lateral Support Assembly, Tarsys TMSLM/TMSLL For Conventional Recline, Tilt/Recline & Recline w/ BPO Option Item Number Note 1 2 3 4 6 7 8 9 10 10 11 1 2 3 4 6 7 8 9 10 10 11 5 6 7 8 9 10 11 5 A A B B Quantity Per Part Number 1090200 1090201 1090198 1090199 6 7 8 9 10 11 NOTE: Description Package Assembly Kit, Swingaway Lateral Support Assembly w/ Medium Pads (Pair) Pad, Lateral Support - Medium (6" W x 4" H) T-Nut (1/4-20) Screw, Socket Flat Head (1/4-20 x 1/2") Bracket, Extension Offset, Black (1/2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (2") Bracket, Flush Mount, Black Bracket, Swingaway - Right NLA - Bracket, Swingaway - Left Screw, Socket Flat Head (#10-32 x 1/2") Kit, Swingaway Lateral Support Assembly w/ Large Pads (Pair) Pad, Lateral Support - Large (6" W x 5" H) T-Nut (1/4-20) Screw, Socket Flat Head (1/4-20 x 1/2") Bracket, Extension Offset, Black (1/2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (2") Bracket, Flush Mount, Black Bracket, Swingaway - Right NLA - Bracket, Swingaway - Left Screw, Socket Flat Head (#10-32 x 1/2") Kit, Swingaway Bracket Assembly w/ Offset Brackets - Right Bracket, Extension Offset, Black (1/2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (2") Bracket, Flush Mount, Black Bracket, Swingaway - Right Screw, Socket Flat Head (#10-32 x 1/2") Kit, Swingaway Bracket Assembly w/ Offset Brackets - Left Bracket, Extension Offset, Black (1/2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (2") Bracket, Flush Mount, Black NLA - Bracket, Swingaway - Left Screw, Socket Flat Head (#10-32 x 1/2") A - Includes items 2-4 and 6-11 B - Includes items 6-11 170 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 2 1 1 1 1 1 1 1 1 1 1 1 2 2 4 8 2 2 2 4 1 1 8 1 1 1 1 1 1 1 1 1 1 1 1 2 4 8 2 2 2 4 1 1 8 1 1 1 1 1 1 1 1 1 1 1 2 1 4 1 1 1 1 1 1 1 1 1 1 2 1 4 Lateral Support Assembly, Stealth TWB-TPR/TWB-TPRL Conventional Recline, Tilt/Recline & Recline w/ BPO Option Item Number Note Quantity Per 1 A Part Number 1125825 1 A 1125821 NOTE: Description Package Assembly Kit, Swingaway Lateral Support Assembly w/ Medium Pads (5" W x 3" H), Stealth (TWB-TPR) (Pair) Kit, Swingaway Lateral Support Assembly w/ Large Pads (6" W x 4" H), Stealth (TWB-TPRL) (Pair) A - Individual components are not available 171 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 2 1 2 1 Lateral Support Assembly, Tarsys CSLM/CSLL Contoura Seating 172 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Lateral Support Assembly, Tarsys CSLM/CSLL Contoura Seating Item Number Note 1 2 4 5 6 7 8 9 10 12 13 13 14 15 16 17 18 1 2 4 5 6 7 8 9 10 12 13 13 14 15 16 17 18 3 4 5 6 7 8 9 A A B Quantity Per Part Number 1128353 1128354 1125780 Description Package Assembly Kit, Lateral Support Assemblies w/ Medium Pads (Pair) Pad, Lateral Support - Medium (6" W x 4" H) Screw, Socket Button (1/4-20 x 3/4") Washer (1/4 x 1/2 x 1/16") Locknut (#10-32) Bracket, Positioning Strap, Black Locknut (1/4-20) Screw, Socket Flat Head (#10-32 x 1/2") Bracket, Mounting, Black Screw, Socket Flat Head (#10-32 x 1/2") Bracket, Swingaway - Right NLA - Bracket, Swingaway - Left Bracket, Flush Mount, Black Bracket, Extension Offset, Black (1/2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (2") Screw, Socket Flat Head (1/4-20 x 1/2") Kit, Lateral Support Assemblies w/ Large Pads (Pair) Pad, Lateral Support - Large (6" W x 5" H) Screw, Socket Button (1/4-20 x 3/4") Washer (1/4 x 1/2 x 1/16") Locknut (#10-32) Bracket, Positioning Strap, Black Locknut (1/4-20) Screw, Socket Flat Head (#10-32 x 1/2") Bracket, Mounting, Black Screw, Socket Flat Head (#10-32 x 1/2") Bracket, Swingaway - Right NLA - Bracket, Swingaway - Left Bracket, Flush Mount, Black Bracket, Extension Offset, Black (1/2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (2") Screw, Socket Flat Head (1/4-20 x 1/2") Kit, Lateral Support Mounting Hardware (Pair) Screw, Socket Button (1/4-20 x 3/4") Washer (1/4 x 1/2 x 1/16") Locknut (#10-32) Bracket, Positioning Strap, Black Locknut (1/4-20) Screw, Socket Flat Head (#10-32 x 1/2") 173 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 4 4 2 4 4 2 4 1 1 2 2 2 2 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 4 4 2 4 4 2 4 1 1 2 2 2 2 4 1 4 4 4 2 4 4 Lateral Support Assembly, Tarsys CSLM/CSLL Contoura Seating Item Number Note 10 12 13 13 14 15 16 17 18 11 12 13 14 15 16 17 11 C C 12 13 14 15 16 17 NOTE: Quantity Per Part Number 1090198 1090199 Description Package Assembly Bracket, Mounting, Black Screw, Socket Flat Head (#10-32 x 1/2") Bracket, Swingaway - Right NLA - Bracket, Swingaway - Left Bracket, Flush Mount, Black Bracket, Extension Offset, Black (1/2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (2") Screw, Socket Flat Head (1/4-20 x 1/2") Kit, Swingaway Bracket Assembly w/ Offset Brackets - Right Screw, Socket Flat Head (#10-32 x 1/2") Bracket, Swingaway - Right Bracket, Flush Mount, Black Bracket, Extension Offset, Black (1/2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (2") Kit, Swingaway Bracket Assembly w/ Offset Brackets - Left Screw, Socket Flat Head (#10-32 x 1/2") NLA - Bracket, Swingaway - Left Bracket, Flush Mount, Black Bracket, Extension Offset, Black (1/2") Bracket, Extension Offset, Black (1") Bracket, Extension Offset, Black (2") A - Includes items 2, 4-10 and 12-18 B - Includes items 4-10 and 12-18 C - Includes items 12-17 174 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 1 1 2 4 1 1 2 2 2 2 4 1 1 1 1 1 1 1 1 4 1 2 1 1 1 1 1 1 1 1 1 1 4 1 2 1 1 1 Lateral Support Assembly, Stealth TWB-CPR/TWB-CPRL Contoura Seating 175 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Lateral Support Assembly, Stealth TWB-CPR/TWB-CPRL Contoura Seating Item Number Note 1 A Quantity Per Part Number 1128734 2 4 5 6 7 8 1 A 1128735 2 4 5 6 7 8 3 B 1128733 4 5 6 7 8 NOTE: Description Package Assembly Kit, Swingaway Lateral Support Assemblies w/ Medium Pads (5" W x 3" H), Stealth (Pair) Support, Swingaway Lateral w/ Medium Pads (5" W x 3" H), Stealth (TWB-CPR) Screw, Socket Button (1/4-20 x 3/4") Locknut (1/4-20) Bracket, Positioning Strap, Black Washer (1/4 x 1/2 x 1/16") Screw, Socket Button Head (1/4-20 x 1/2") Kit, Swingaway Lateral Support Assemblies w/ Large Pads (6" W x 4" H), Stealth (Pair) Support, Swingaway Lateral w/ Large Pads (6" W x 4" H), Stealth (TWB-CPRL) Screw, Socket Button (1/4-20 x 3/4") Locknut (1/4-20) Bracket, Positioning Strap, Black Washer (1/4 x 1/2 x 1/16") Screw, Socket Button Head (1/4-20 x 1/2") Kit, Swingaway Lateral Support Mounting Hardware, Stealth (Pair) Screw, Socket Button (1/4-20 x 3/4") Locknut (1/4-20) Bracket, Positioning Strap, Black Washer (1/4 x 1/2 x 1/16") Screw, Socket Button Head (1/4-20 x 1/2") A - Includes items 2 and 4-8 B - Includes items 4-8 176 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 2 1 1 1 1 1 1 1 4 8 2 4 4 1 2 1 1 1 1 1 1 1 4 8 2 4 4 1 1 1 1 1 1 4 8 2 4 4 Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option 177 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option Conventional Tilt w/ Conventional Back 16, 17, 18, 19, 20" Wide Item # 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Description Conv. Tilt w/ Conv. Tilt w/ Conv. Tilt w/ Conv. Tilt w/ Conv. Tilt w/ Conv. Back Conv. Back Conv. Back Conv. Back Conv. Back 16" Wide 17" Wide 18" Wide 19" Wide 20" Wide Vent Tray Kit 1142994-NLA 1142995-NLA 1142996-NLA 1142997-NLA 1142998-NLA & Service Manual See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A Kit, Vent Tray Assembly without 1125708 1125708 1125708 1125708 1125708 Mounting Hardware Kit, Vent Tray Mounting 1125805 1125805 1125805 1125805 1125805 Hardware Spreader Bar 0013602 0013702 0013802 0013902 0014002 Assembly Spreader Bar Mounting 1125761 1125761 1125761 1125761 1125761 Hardware Battery Wire Harness with Terminal 1120363 1120363 1120363 1120363 1120363 Hardware, 22NF Rear Battery Wire Harness with Terminal 1120362 1120362 1120362 1120362 1120362 Hardware, 22NF Front Battery Wire Harness with Terminal 1121143 1121143 1121143 1121143 1121143 Hardware, 22NF Vent Battery Tray Assembly, 1121142-NLA 1121142-NLA 1121142-NLA 1121142-NLA 1121142-NLA TDX 22NF For Vent Kit, Vent Battery Harness 1121029-NLA 1121029-NLA 1121029-NLA 1121029-NLA 1121029-NLA Assembly with Hardware 178 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Qty. Per Asbly. 1 1 1 1 1 1 1 1 1 1 Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option Conventional Tilt w/ Conventional Back 16, 17, 18, 19, 20" Wide Item # 11. 12. Description Conv. Tilt w/ Conv. Tilt w/ Conv. Tilt w/ Conv. Tilt w/ Conv. Tilt w/ Conv. Back Conv. Back Conv. Back Conv. Back Conv. Back 16" Wide 17" Wide 18" Wide 19" Wide 20" Wide Kit, Vent Battery Harness Assembly 1139531 1139531 1139531 1139531 1139531 with Hardware For TRBKTS Option Kit, Battery Support Bracket Assembly For Vent 1139541-NLA 1139541-NLA 1139541-NLA 1139541-NLA 1139541-NLA "Option" System w/ 22NF Batteries Qty. Per Asbly. 1 1 See Note(s) B 13. Kit, Battery Box Door Assembly, 1121072-NLA 1121072-NLA 1121072-NLA 1121072-NLA 1121072-NLA 22NF Long (For Vent) 1 See Note(s) B 14. 15. NOTE: Spring, Dark Yellow; 1125645 1125645 1125645 1125645 1125645 EXTRA Heavy Duty See Note(s) C See Note(s) C See Note(s) C See Note(s) C See Note(s) C Instruction Sheet, 1143185-NLA 1143185-NLA 1143185-NLA 1143185-NLA 1143185-NLA Formula TRE Vent Tray Kit 2 1 A - Vent Tray Kit includes items 2-15. B - Includes Battery Box Door. C - Spring color changed from Sunny Yellow to Dark Yellow 3/22/10. It is recommended to order springs in pairs to match color and maintain equal spring tension on both sides of the wheelchair 179 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option (Conventional Tilt w/ Conventional Back 21, 22, 23, 24" Wide) & (Conventional Tilt w/ BPO Option) Item # 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Description Conv. Tilt w/ Conv. Tilt w/ Conv. Tilt w/ Conv. Tilt w/ Conv. Tilt w/ Conv. Back Conv. Back Conv. Back Conv. Back BPO Option 21" Wide 22" Wide 23" Wide 24" Wide Vent Tray Kit 1142999-NLA 1143000-NLA 1143001-NLA 1143002-NLA 1143003-NLA & Service Manual See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A Kit, Vent Tray Assembly without 1125708 1125708 1125708 1125708 1125708 Mounting Hardware Kit, Vent Tray Mounting 1125805 1125805 1125805 1125805 1125805 Hardware Spreader Bar 0014102 0014202 0284202-NLA 0284302-NLA N/A Assembly Spreader Bar Mounting 1125761 1125761 1125761 1125761 N/A Hardware Battery Wire Harness with Terminal 1120363 1120363 1120363 1120363 1120363 Hardware, 22NF Rear Battery Wire Harness with Terminal 1120362 1120362 1120362 1120362 1120362 Hardware, 22NF Front Battery Wire Harness with Terminal 1121143 1121143 1121143 1121143 1121143 Hardware, 22NF Vent Battery Tray Assembly, 1121142-NLA 1121142-NLA 1121142-NLA 1121142-NLA 1121142-NLA TDX 22NF For Vent Kit, Vent Battery Harness 1121029 1121029 1121029 1121029 1121029 Assembly with Hardware 180 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Qty. Per Asbly. 1 1 1 1 1 1 1 1 1 1 Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option (Conventional Tilt w/ Conventional Back 21, 22, 23, 24" Wide) & (Conventional Tilt w/ BPO Option) Item # 11. 12. Description Conv. Tilt w/ Conv. Tilt w/ Conv. Tilt w/ Conv. Tilt w/ Conv. Tilt w/ Conv. Back Conv. Back Conv. Back Conv. Back BPO Option 21" Wide 22" Wide 23" Wide 24" Wide Kit, Vent Battery Harness Assembly 1139531 1139531 1139531 1139531 1139531 with Hardware For TRBKTS Option Kit, Battery Support Bracket Assembly For Vent 1139541-NLA 1139541-NLA 1139541-NLA 1139541-NLA 1139541-NLA "Option" System w/ 22NF Batteries Qty. Per Asbly. 1 1 See Note(s) B 13. Kit, Battery Box Door Assembly, 1121072-NLA 1121072-NLA 1121072-NLA 1121072-NLA 1121072-NLA 22NF Long (For Vent) 1 See Note(s) B 14. 15. NOTE: Spring, Dark Yellow; 1125645 1125645 1125645 1125645 1125645 EXTRA Heavy Duty See Note(s) C See Note(s) C See Note(s) C See Note(s) C See Note(s) C Instruction Sheet, 1143185-NLA 1143185-NLA 1143185-NLA 1143185-NLA 1143185-NLA Formula TRE Vent Tray Kit 2 1 A - Vent Tray Kit includes items 2-15. The Conventional Tilt w/ BPO Option omits items 2 and 3. B - Includes Battery Box Door. C - Spring color changed from Sunny Yellow to Dark Yellow 3/22/10. It is recommended to order springs in pairs to match color and maintain equal spring tension on both sides of the wheelchair 181 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option Conventional Recline, Tilt/Recline 16-24" Wide Item # 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Description Vent Tray Kit & Service Manual Kit, Vent Tray Assembly without Mounting Hardware Kit, Vent Tray Mounting Hardware Spreader Bar Assembly Spreader Bar Mounting Hardware Battery Wire Harness with Terminal Hardware, 22NF Rear Battery Wire Harness with Terminal Hardware, 22NF Front Battery Wire Harness with Terminal Hardware, 22NF Vent Battery Tray Assembly, TDX 22NF For Vent Kit, Vent Battery Harness Assembly with Hardware Kit, Vent Battery Harness Assembly with Hardware For TRBKTS Option 1143004-NLA 1143005-NLA Conv. Tilt/Recline 16-20" Wide 1143006-NLA See Note(s) A See Note(s) A See Note(s) A 1125708 1125708 1125708 1125708 1 1125819-NLA 1125819-NLA 1125800 1125800 1 1125767-NLA 1125769-NLA 1125767-NLA 1125769-NLA 1 1125765 1125765 1125765 1125765 1 1120363 1120363 1120363 1120363 1 1120362 1120362 1120362 1120362 1 1121143 1121143 1121143 1121143 1 1121142-NLA 1121142-NLA 1121142-NLA 1121142-NLA 1 1121029 1121029 1121029 1121029 1 1139531 1139531 1139531 1139531 1 Conv. Recline Conv. Recline 16-20" Wide 20-24" Wide Conv. Tilt/Recline Qty. Per Asbly. 20-24" Wide 1143007-NLA 1 See Note(s) A 182 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option Conventional Recline, Tilt/Recline 16-24" Wide Item # 12. Description Conv. Tilt/Recline 16-20" Wide Conv. Tilt/Recline 20-24" Wide Qty. Per Asbly. 1139541-NLA 1139541-NLA 1139541-NLA 1 1121072-NLA 1121072-NLA 1121072-NLA 1 1125645 1125645 1125645 See Note(s) C See Note(s) C See Note(s) C 1143185-NLA 1143185-NLA 1143185-NLA Conv. Recline Conv. Recline 16-20" Wide 20-24" Wide Kit, Battery Support Bracket Assembly - For Vent "Option" 1139541-NLA System w/ 22NF Batteries See Note(s) B 13. Kit, Battery Box Door Assembly, 22NF Long (For 1121072-NLA Vent) See Note(s) B 14. 15. NOTE: Spring, Dark 1125645 Yellow; EXTRA Heavy Duty See Note(s) C Instruction Sheet, Formula 1143185-NLA TRE Vent Tray Kit 2 1 A - Vent Tray Kit includes items 2-15 B - Includes Battery Box Door. C - Spring color changed from Sunny Yellow to Dark Yellow 3/22/10. It is recommended to order springs in pairs to match color and maintain equal spring tension on both sides of the wheelchair 183 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option Contoura Tilt, Tilt/Recline and Recline Item # 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Description Contoura Tilt & T/R Vent Tray Kit & 1143008-NLA Service Manual See Note(s) A Kit, Vent Tray Assembly without 1125708 Mounting Hardware Kit, Vent Tray 1125800-NLA Mounting Hardware Spreader Bar 1125788-NLA Assembly Spreader Bar 1125765 Mounting Hardware Battery Wire Harness with Terminal 1120363 Hardware, 22NF Rear Battery Wire Harness with Terminal 1120362 Hardware, 22NF Front Battery Wire Harness with Terminal 1121143 Hardware, 22NF Vent Battery Tray Assembly, TDX 22NF 1121142-NLA For Vent Kit, Vent Battery Harness Assembly 1121029 with Hardware Kit, Vent Battery Harness Assembly 1139531 with Hardware For TRBKTS Option Kit, Battery Support Bracket Assembly For Vent "Option" 1139541-NLA System w/ 22NF Batteries Contoura Recline 1143009-NLA See Note(s) A Qty. Per Asbly. 1 1125708 1 1125819-NLA 1 1125788-NLA 1 1125765 1 1120363 1 1120362 1 1121143 1 1121142-NLA 1 1121029 1 1139531 1 1139541-NLA 1 1121072-NLA 1 See Note(s) B 13. Kit, Battery Box Door Assembly, 22NF Long (For Vent) 1121072-NLA See Note(s) B 14. 15. Spring, Dark Yellow; EXTRA Heavy Duty Instruction sheet, Formula TRE Vent Tray Kit 1125645 1125645 See Note(s) C See Note(s) C 1143185-NLA 1143185-NLA 184 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 2 1 Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option NOTE: A - Vent Tray Kit includes items 2-15 B - Includes Battery Box Door. C - Spring color changed from Sunny Yellow to Dark Yellow 3/22/10. It is recommended to order springs in pairs to match color and maintain equal spring tension on both sides of the wheelchair 185 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Assembly without Mounting Hardware NOTE: When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories, Vent Tray Kits" 186 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Assembly without Mounting Hardware NOTE: When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories, Vent Tray Kits" Item Number Note 1 2 3 4 5 6 7 8 9 10 11 12 13 A 14 15 16 NOTE: Quantity Per Part Number 1125708 Description Package Assembly Vent Tray Assembly NLA - Vent Tray Hanger Assembly NLA - Strap and Buckle Assembly NLA - Tray, Vent Screw, Socket Button Head (1/4-20 x 2") Lockwasher, Split (1/4") Nut, Hex with Nylon Cap (1/4-20) Spacer, Coved (1/4 x 3/4 x 11/32") Screw, Socket Button Head (1/4-20 x 1/2") NLA - Spacer NLA - Plug, Slide Tube Screw, Socket Button Head (1/4-20 x 1-1/4") NLA - Decal, Warning, Approved Charger and Harness NLA - Bracket, Vent Tray, Black Locknut (1/4-20) Frame, Vent Tray, Upper Support, Black 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 4 4 2 2 2 1 1 1 1 1 4 1 A - Includes items 2-16. When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories, Vent Tray Kits" 187 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Mounting Hardware Conventional Tilt and BPO Option NOTE: When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories, Vent Tray Kits" 188 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Mounting Hardware Conventional Tilt and BPO Option NOTE: When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories, Vent Tray Kits" Item Number Note 1 A,A1 2 3 4 5 6 7 8 9 10 11 12 13 13 14 15 16 17 18 19 NOTE: Quantity Per Part Number 1125805-NLA Description Package Assembly Kit, Vent Tray Mounting Hardware For Conventional Tilt & Conventional Tilt w/ BPO Option NLA - Locknut (#10-24) NLA - Washer, Steel (7/8 x 3/8 x 1/16") Vent Pivot Tube Assembly, Bent NLA - Vent Pivot Tube Assembly, Lower Spacer, Nylon (1/4 x 2 x 3/4") NLA - Spacer NLA - Screw, Shoulder Hex Socket Head (1/4 x 1", #10-24) NLA - Screw, Shoulder Hex Socket Head (1/4 x 1-3/4", #10-24) NLA - Spacer (1/4 x 1/2 x 5/32") Screw, Hex Head w/ Patch (1/4-20 x 3/4") Washer (1/4 x 1/2 x 1/16") NLA - Bracket, Lower Vent Pivot, Black - Right NLA - Bracket, Lower Vent Pivot, Black - Left Washer, Nylon (25/64 x 7/8 x 1/32") Screw, Socket Button (1/4-20 x 3/4") Locknut (1/4-20) NLA - Bracket, Vent Tray Hanger, Black Washer, Flat (21/64 x 53/64 x 7/64") Screw, Shoulder Hex Socket Head (5/16" x 3", 1/4-20) 1 1 1 1 1 1 1 1 1 8 8 2 2 2 4 6 1 2 1 1 1 1 1 1 1 1 1 1 1 4 2 6 1 1 2 4 5 1 1 1 A - Includes items 2-19. Vent Tray Mounting Hardware was revised after 4/2/06 and replaces all hardware used before 4/3/06 also. Sold as a hardware kit only. A1 - To know when the hardware kit has been replaced, one of the hardware components (item 4) was revised from a Straight Pivot Tube to a Bent Pivot Tube assembly. 189 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Mounting Hardware Conventional & Contoura Recline Only NOTE: When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories, Vent Tray Kits" 190 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Mounting Hardware Conventional & Contoura Recline Only NOTE: When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories, Vent Tray Kits" Item Number Note 1 A,A1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 NOTE: Quantity Per Part Number 1125819-NLA Description Package Assembly NLA - Kit, Vent Tray Mounting Hardware For Conventional & Contoura Recline Only Screw, Shoulder Hex Socket Head (5/16" x 3", 1/4-20) Washer, Flat (21/64 x 53/64 x 7/64") Washer, Nylon (25/64 x 7/8 x 1/32") Locknut (1/4-20) NLA - Screw, Hex Head (3/8-16 x 1-1/4") NLA - Spacer (3/8 x 3/4 x 3/8") Locknut, Low Profile (3/8-16) NLA - Screw, Shoulder Hex Socket Head (1/4 x 1", #10-24) NLA - Spacer NLA - Screw, Shoulder Hex Socket Head (1/4 x 1-3/4", #10-24) NLA - Screw, Shoulder Hex Socket Head (1/2 x 2-3/4", 3/8-16) Spacer, Nylon (1/4 x 7/16 x 1/8") NLA - Washer, Steel (7/8 x 3/8 x 1/16") NLA - Locknut (#10-24) Spacer, Nylon (1/4 x 2 x 3/4") NLA - Bracket, Lower Vent Mounting, Black NLA - Vent Pivot Tube Assembly, Lower Vent Pivot Tube Assembly, Bent 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 2 4 6 1 1 4 2 1 2 1 1 1 1 1 1 1 4 8 8 2 2 2 2 A - Includes items 2-19. Vent Tray Mounting Hardware was revised after 4/2/06 and replaces all hardware used before 4/3/06 also. Sold as a hardware kit only. A1 - To know when the hardware kit has been replaced, one of the hardware components (item 19) was revised from a Straight Pivot Tube to a Bent Pivot Tube assembly. 191 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Mounting Hardware Conventional Tilt/Recline, (Contoura Tilt & T/R) & All T/R w/ BPO Option NOTE: When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories, Vent Tray Kits" 192 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Vent Tray Mounting Hardware Conventional Tilt/Recline, (Contoura Tilt & T/R) & All T/R w/ BPO Option NOTE: When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories, Vent Tray Kits" Item Number Note 1 A,A1 2 3 4 5 6 7 8 9 10 11 12 13 15 15 16 17 18 NOTE: Quantity Per Part Number 1125800-NLA Description Package Assembly Kit, Vent Tray Mounting Hardware For Conventional T/R, (Contoura Tilt & T/R) & All T/R w/ BPO Option Screw, Shoulder Hex Socket Head (5/16" x 3", 1/4-20) Washer, Flat (21/64 x 53/64 x 7/64") Washer, Nylon (25/64 x 7/8 x 1/32") Locknut (1/4-20) NLA - Screw, Shoulder Hex Socket Head (1/4 x 1", #10-24) NLA - Screw, Shoulder Hex Socket Head (1/4 x 1-3/4", #10-24) NLA - Spacer NLA - Spacer (1/4 x 1/2 x 5/32") Spacer, Nylon (1/4 x 2 x 3/4") NLA - Washer, Steel (7/8 x 3/8 x 1/16") NLA - Locknut (#10-24) Washer (1/4 x 1/2 x 1/16") Screw, Hex Head w/ Patch (1/4-20 x 3/4") NLA - Bracket, Lower Vent Pivot, Black - Right NLA - Bracket, Lower Vent Pivot, Black - Left Vent Pivot Tube Assembly, Bent NLA - Vent Pivot Tube Assembly, Lower 1 1 1 1 1 1 1 1 1 2 1 6 1 2 1 1 1 1 1 1 1 1 1 1 1 4 4 2 8 8 2 2 1 1 2 2 A - Includes items 2-17. Vent Tray Mounting Hardware was revised after 4/2/06 and replaces all hardware used before 4/3/06 also. Sold as a hardware kit only. A1 - To know when the hardware kit has been replaced, one of the hardware components (item 15) was revised from a Straight Pivot Tube to a Bent Pivot Tube assembly. 193 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Seat and Chest Positioning Straps without Mounting Hardware 194 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Seat and Chest Positioning Straps without Mounting Hardware Positioning Straps Description Auto Style Push Button 16"-19" Wide 20"-22" Wide 23"-24" Wide 1034622-NLA 1004310 1034625 NLA - Strap, Positioning, Strap, Positioning, Strap, Positioning, Seat/Chest w/ Auto Style Seat/Chest w/ Auto Style Seat/Chest w/ Auto Style Push Button Buckle (Eyelet Push Button Buckle (Eyelet Push Button Buckle (Eyelet to Eyelet Length 69") to Eyelet Length 48") to Eyelet Length 61") See Note(s) B Airline Style Hook and Loop NOTE: 1034753 Strap, Positioning, 1034751 1034752 Seat/Chest w/Airline Style Strap, Positioning, Strap, Positioning, Buckle Seat/Chest w/ Airline Style Seat/Chest w/ Airline Style (Eyelet to Eyelet Length Buckle (Eyelet to Eyelet Buckle (Eyelet to Eyelet 70") Length 46") Length 61") 1034745 1034745 1034745 Strap, Positioning, Strap, Positioning, Strap, Positioning, Seat/Chest w/ Hook and Seat/Chest w/ Hook and Seat/Chest w/ Hook and Loop Style Buckle (Eyelet to Loop Style Buckle (Eyelet to Loop Style Buckle (Eyelet to Eyelet Length 61") Eyelet Length 61") Eyelet Length 61") See Note(s) A See Note(s) A A - Hook and Loop style positioning strap for power chairs is used for chest positioning only B - For replacement contact The Aftermarket Group (TAG). 195 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com See Note(s) A Seat and Chest Positioning Straps Mounting Hardware 196 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Seat and Chest Positioning Straps Mounting Hardware Item Number Note 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 NOTE: A B C D E Quantity Per Part Number 1124385 1037610 1025736 1090212 1026298 1125798 1128732 Description Package Assembly Kit, Seat Positioning Strap Mounting Hardware (both LT & RT sides) Screw, Hex Head w/ Patch (1/4-20 x 3/4") Washer (1/4 x 1/2 x 1/16") Locknut (1/4-20) Screw, Hex Head (1/4-20 x 1-5/8") Locknut (1/4-20) Kit, Chest Positioning Strap Mounting Hardware For Conventional Seating T-Nut (1/4-20) Washer (1/4 x 23/32 x 1/16") Screw, Hex Head w/ Patch (1/4-20 x 1/2") Package, Screw with Washer (#10 x 7/8") (Pair) Kit, Chest Positioning Strap's Mounting Hardware For Contoura Seating (both LT & RT sides) Screw, Socket Button (1/4-20 x 3/4") Washer (1/4 x 1/2 x 1/16") Bracket, Positioning Strap, Black Locknut (1/4-20) Package, Screw, Socket Button Head (1/4-20 x 2") (Pair) A - Includes items 2-4 B - Includes items 8-10 C - The back upholstery and chest positioning strap share the same mounting hardware D - Includes items 13-16 E - Used for mounting chest positioning straps to solid straight back canes 197 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 1 1 1 1 1 1 2 2 2 2 2 1 1 1 1 2 1 2 2 2 1 1 1 1 1 1 2 6 6 2 6 1 Personal Back10 (TALL Regular/TALL Plus) Mounting Hardware Conventional Recline w/ BPO Option 198 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Personal Back10 (TALL Regular/TALL Plus) Mounting Hardware Conventional Recline w/ BPO Option Item Number Note 1 A Quantity Per Part Number 1132748 2 3 4 5 1 A 2 3 4 5 NOTE: 1133122 Description Package Assembly Kit, Personal Back10 Tall Back Mounting Hardware For Conventional Recline 16-20" Wide Washer (1/4 x 1/2 x 1/16") Screw, Hex Head w/ Patch (1/4-20 x 1/2") Bracket, Personal Back10 Tall, For Conventional Recline, Black (16 - 20" W) T-Nut (1/4-20) Kit, Personal Back10 Tall Back Mounting Hardware For Conventional Recline 20-24" Wide Washer (1/4 x 1/2 x 1/16") Screw, Hex Head w/ Patch (1/4-20 x 1/2") Bracket, Personal Back10 Tall, For Conventional Recline, Black (20 - 24" W) T-Nut (1/4-20) A - Includes items 2-5 and is used for a Personal Back10 Tall (Regular or Plus) model only 199 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 2 1 1 1 1 4 4 2 1 2 4 1 1 1 1 4 4 2 1 4 Power Wheelchair Tool Kit 200 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com Power Wheelchair Tool Kit Item Number Note 1 Quantity Per Part Number 1125222-NLA Description Package Assembly NLA - Kit, Power Wheelchair Tool Includes: 1 ea. Multimeter with Leads 1 ea. Locator, Protractor/Angle Magnetic Base 1 ea. Instructions, MKIV Programmer 1 ea. Wire, Grounding with Hand Strap and Clip 1 ea. Leads, 1" Test 1 ea. Light, Pen with Invacare Logo 1 ea. Tape Measure, Compact with Invacare Logo 1 ea. Screwdriver, Pen-Size Phillips/Flat Head 1 ea. Cable, Virtual Service Charger/Modem 201 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 1 Miscellaneous Accessories Item Number Note A NOTE: Quantity Per Part Number 40176X010 Description Package Assembly Pump, Tire 1 A - Not Shown 202 Form No. 04-041 To order call toll free 1-800-333-6900, or www.invacare.com 1 Invacare Corporation One Invacare Way Elyria, Oh USA 44036-2125 800-333-6900 Technical Support 800-832-4707 Florida Technical Support 407-321-5630 www.invacare.com Customer Service 800-333-6900 © 2018 Invacare Corporation. All rights reserved. Republication, duplication or modification in whole or in part is prohibited without prior written permission from Invacare. Trademarks are identified by ™ and ®. All trademarks are owned by or licensed to Invacare Corporation or its subsidiaries unless otherwise noted. (Revised 2/16/18) Form No. 04-041
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Modify Date : 2018:02:19 09:19:59-05:00 Create Date : 2018:02:19 09:19:59-05:00 Metadata Date : 2018:02:19 09:19:59-05:00 Format : application/pdf Document ID : uuid:4ea57f24-679a-4edc-9ad0-ce4e923fe6b0 Instance ID : uuid:c5b89d71-2d1a-4505-b2cd-748249685c22 Page Count : 204EXIF Metadata provided by EXIF.tools