1c Sitraffic S X Service Manual Controller Technology A001a En
User Manual:
Open the PDF directly: View PDF
Page Count: 152 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- 1. Technical concept
- 1.1. The modular hardware concept
- 1.2. Sitraffic sX
- 1.3. Key data for cabinets
- 1.4. Frame
- 1.6. Structure of Sitraffic sX-H
- 1.7. Basic version sX-H
- 1.8. Additions
- 1.9. Schematic representation of main chassis
- 1.10. Schematic representation of add-on chassis
- 1.11. Switch-off route
- 1.12. 230 -V distribution
- 1.13. Utility compartment
- 1.14. Power distributor
- 1.15. Power consumption of sX-H
- 2. Components
- 2.1. Power connection
- 2.2. Power supplies
- 2.3. CBU
- 2.4. CMD
- 2.5. CTB
- 2.6. CEB
- 2.7. OMC-U
- 2.8. CPDH
- 2.9. LED switch LSHS
- 2.10. CEW module
- 2.11. CDBH
- 2.12. CPA module
- 2.13. sX-Hx device
- 2.14. CLB installation locations
- 2.15. CLB
- 2.16. CLBT module
- 2.17. CLA module
- 2.18. SLD4 loop detector module
- 2.19. IO module CIE//CIO
- 2.20. Wimag activation
- 2.21. Video detectors
- 2.21.1. DIB-E
- 2.21.1.1. Setting DIB-E address in the CLB
- 2.21.1.2. DIB-E Front
- 2.21.1.3. Head connector
- 2.21.1.4. USB port
- 2.21.1.5. Ethernet port
- 2.21.1.6. LED description
- 2.21.1.7. Connection of the SIVICAMs
- 2.21.1.8. Topologies of the networks to be connected to the SIVICAMs
- 2.21.1.9. Power supply of the cameras
- 2.21.1.10. DIB-E activation at the CLB
- 2.21.1.11. DIB-E activation at the CBU
- 2.21.1.12. Additional Information
- 2.21.1. DIB-E
- 2.22. 230 V pedestrian request / pedestrian confirmation CIAC/CIAB
- 2.22.1. Setting CIAB address
- 2.22.2. Structure of CIAB
- 2.22.3. Terminal assignment for CIAB
- 2.22.4. CIAC breakdown
- 2.22.5. CIAC LED meaning
- 2.22.6. CIAC head connector (X2)
- 2.22.7. External input
- 2.22.8. Output
- 2.22.9. CIAB activation internally 230 V
- 2.22.10. Activation button for confirmation devices 230 V
- 2.22.11. CIAB connection, internal for signal heads for the visually impaired
- 2.23. BAZ operating unit
- 2.24. Alternative command device
- 2.25. CCU GPS internal
- 2.26. CCUE GPS External
- 2.27. PT preference (AFD)
- 2.28. Supplementary power supply 24V DC
- 2.29. Supplementary power supply 24V AC
- 2.30. Cabinet heater
- 2.31. Control center activation
- 2.32. UPS (USC is optional)
- 2.33. Special adapter CUA
- 3. Diagnostics
- 4. Technical data
- 5. Part numbers, modules
- 6. Part numbers for installation sets
- 7. Abbreviations
- 8. Index