TDC 100/200 2014 Vit Catalog COMP4

User Manual: TDC-100/200

Open the PDF directly: View PDF .
Page Count: 72

Download
Open PDF In Browser	View PDF

Controller Enclosure Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Heavy-Duty Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
Light-Duty Cabinets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13
Backflow Cover Size Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
Backflow Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-23
Commercial Service Pedestals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-32
Battery Backup Traffic Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
QuickPad® Enclosure Mounting Pad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Enclosure Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Tree & Sprinkler Support & Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-39
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-67
Technical Information & Trade Warranties . . . . . . . . . . . . . . . . . . . . . . . . . . 68-70

Telephone (800) 729-1314 ■ FAX (888) 310-3946 ■ www.vitproducts.com

Strong box
controller enclosure guide

Stations
Width (in.)
Height (in.)
Depth (in.)
Residential/Commercial
RainBIrd Controllers
EC Controller
ESP-TM
ESP-Modular
ESP-LX Plus / LXi Plus
ESP-LX Modular
ESP-MC
IQ LXM-DTC
MDC (2 wire systems)
TWI (2 wire Interface)
LDI / SDI (Lg/Sm Decoder Interface)
CCU-6 (Cluster Control)
CCU-28 (Cluster Control)
ESP-SAT
ESP-SITE SAT

4-9 stations
4-8 stations
4-13 stations
6-24 stations
8-32 stations
8-40 stations
8-32 stations
1-200 decoders
28 satellites
1-200 decoders
6 satellites
28 satellites
12-40 stations
12-40 stations

6.50
7.00
11.00
9.50
14.50
11.50
14.50
11.00
15.50
9.50
11.50
11.50
11.50
11.50

5.50
8.25
8.00
10.25
12.75
11.50
12.75
12.00
12.50
10.25
11.50
11.50
11.50
11.50

1.75
2.25
4.50
4.50
5.50
6.50
5.50
5.50
6.00
4.50
6.50
6.50
6.50
6.50

R
R
R
R/C
R/C
C
C
C
C
C
C
C
C
C

RME Sentar II SE
SE-B / SE-SB
RME Eagle EG
EG-B / EG-SB
RME Eagle-I central
Egi-B / Egi-SB
RME - DX2 Evolution

6-36 stations
6-36 stations
6-36 stations
6-36 stations
6-36 stations
6-36 stations
6-48 stations

13.25
13.25
13.25
13.25
13.25
13.25
13.25

10.25
18.00
10.25
18.00
10.25
18.00
10.25

4.75
4.50
4.75
4.50
4.75
4.50
4.75

C
C
C
C
C
C
C

RainMaster

Toro

DDC-WP
2-8 stations
5.75
5.00
2.00
R
DDC
4-8 stations
3.50
8.50
7.00
R
TMC-212 outdoor
2-12 stations
13.00
9.50
3.50
R/C
TMC-424
4-24 stations
15.25
10.25
5.25
C
TIS-612
6-12 stations
9.75
7.50
5.75
C
TIS-240
24 stations
11.75
8.50
5.75
C
Custom Command
Plastic 12-24 Station
12-24 stations
11.50
6.00
8.50
C
Metal 12-24 Station
12-24 stations
10.75
9.75
5.75
C
Metal 36-48 Station
36-48 stations
10.75
15.75
5.75
C
TDC-100/200
100, 200 decoders
14.00
13.00
6.00
C
Sentinel WallMount
12-48 stations
10.75
15.75
5.75
C

Irritrol
RainDial Series
Smart Dial
Total Control Series
KwikDial Series
JR Max Series
MC-E Series
IBOC Plus

6-12 stations
6-24 stations
6-24 stations
4-12 stations
4-8 stations
4-48 stations
4-12 stations

7.75
7.75
8.50
9.00
8.00
9.75
9.25

10.75
10.75
10.50
7.00
6.75
10.50
10.75

4.00
4.00
5.00
4.00
4.00
4.25
5.25

R
R
R
R
R
C
C

I-Core-600-PL
6 stations mod.
I-Core-600-M
6 stations mod.
PRO-C Series
3-15 stations
ICC-Series
8-32 stations
ICC-M Series
8-48 stations
ACC Series
12-48 stations
ACC 990
99 stations
ET Module

13.50
15.50
9.00
11.00
12.25
12.50
12.50
6.00

11.00
12.50
10.00
13.25
16.00
15.50
15.50
4.00

6.50
6.50
4.50
4.75
4.75
6.50
6.50
2.00

C
C
C
C
C
C
C
C

ET- 8
ET-16 Series
ULTIMO Series

8-12 stations
16-32 stations
16-66 stations

9.00
9.75
12.00

8.75
10.75
14.25

3.25
4.25
4.75

R
R
R/C

Constellation

Galaxy

8-24 stations
28-48 stations
8-48 stations
28-48 stations

14.00
14.00
14.00
14.00

12.75
18.00
12.75
18.00

4.25
4.25
4.25
4.25

C
C
C
C

ET Plus
WeatherTRAK ET Pro 2
WeatherTRAK ET Pro 2

9-24 stations
12-24 stations
28-48 stations

6.00
9.75
9.75

7.00
10.50
10.50

1.00
4.25
4.25

Hunter

AquaConserve

Signature

HydroPoint

Calsense
ET2000
ET2000e

8-40 stations
8-48 stations

11.15
11.15

11.40
11.40

7.25
7.25

R
R/C
R/C

C
C

LD-18SW Light Duty
Front Entry Wall Mount
18” x 18” x 8”

EC Controller
ESP-TM
ESP-Modular
ESP-LX Plus / LXi Plus
ESP-LX Modular
ESP-MC
IQ LXM-DTC
MDC (2 wire systems)
TWI (2 wire Interface)
LDI / SDI (Lg/Sm Decoder Interface)
CCU-6 (Cluster Control)
CCU-28 (Cluster Control)
ESP-SAT
ESP-SITE SAT

x x x
x x x
x x x
x
x
xx
xx
xx
x
x
x
x
x
xx
xx
xx x
x
x
x
xx
xx
xx
x
x
xx
x
x
x
xx
xx
xx x
x
x
x
x
xx
xx
xx
x
x
x
x
x
x
xx
xx
xx
x
x
x
xx
xx
xx
x
x
x
x
xx
xx
xx
x
x
x
x
x
xx
xx
xx
x
x
x
x
x
xx
xx
xx
x
x
x
x
x
x
xx
xx
xx
x
x
x
x

x
x
x
x

x
x
x

x
x
x
x
x

RME Sentar II SE
SE-B / SE-SB
RME Eagle EG
EG-B / EG-SB
RME Eagle-I central
Egi-B / Egi-SB
RME - DX2 Evolution

x
x
x
x
x
x
x

RainMaster
x
x
x
x
x
x
x

xx
xx
xx
xx
xx
xx
xx

xx
x
xx
xx
x
xx
xx
x
xx
xx
x

x
x
x

DDC-WP
x x x
DDC
x x x
TMC-212 outdoor
x
x
xx
xx
xx
x
x
x
x
TMC-424
x
x
xx
xx
xx x
x
TIS-612
x
x
xx
xx
xx
x
x
x
x
TIS-240
x
x
xx
xx
xx
x
x
x
x
Custom Command
Plastic 12-24 Station
x
x
xx
xx
xx
x
x
x
x
Metal 12-24 Station
x
x
xx
xx
xx
x
x
x
x
Metal 36-48 Station
x
x
xx
xx
xx
TDC-100/200
x
x
xx
xx
xx x
x
x
Sentinel WallMount
x
x
xx
xx
xx x

x
x
x

x
x

RainDial Series
Smart Dial
Total Control Series
KwikDial Series
JR Max Series
MC-E Series
IBOC Plus

x
x
x
x
x
x
x

x x x
x x x
x
x
xx
xx
xx
x
x
x
x
x
x
xx
xx
xx
x
x
x
x
x
x
xx
xx
xx x
x
x
x
xx
xx
xx x
x
x
x
xx
xx
xx x
x
x x x

x
x
x
x

ET- 8 x x
ET-16 Series x x
ULTIMO Series
x
x
xx
xx
xx
x
x
x

x
x

Toro

Irritrol

x x x
x x x
x x x
x x x
x x x
x
x
xx
xx
xx
x
x
x
x
x
x
xx
xx
xx
x
x
x
x

Hunter
SRC-Series
XC-Series
PRO-C Series
ICC-Series
ICC-M Series
ACC Series
ACC 990
ET Module

AquaConserve

Signature
Constellation

Galaxy

x
x
x
x

xx
xx
xx
xx

xx x
xx
xx x
xx

ET Plus
WeatherTRAK ET Pro 2
WeatherTRAK ET Pro 2

x
x
x

xx
xx
xx

x
x
x

xx
xx

x
x

HydroPoint

Calsense
ET2000
ET2000e

x
x

xx
xx

x
xx

LD-16SW Light Duty
Front Entry Wall Mount
16” x 30” x 8”

LD-16S Light Duty
Front Entry Pedestal
16” x 30” x 8”

SB-22SS
Top Entry Pedestal
24” x 38” x 17”

SB-16SS
Top Entry Pedestal
16” x 38” x 15.5”

SB-16SSW
Front Entry Wall Mount
16” x 18” x 12”

SB-24DSS
Front Entry Pedestal
24” x 36” x 24”

SB-18DSS
Front Entry Pedestal
18” x 36” x 24”

SB-36SS
Front Entry Pedestal
36” x 36” x 12”

SB-24SS
Front Entry Pedestal
24” x 36” x 12”

SB-18SS
Front Entry Pedestal
18” x 36” x 12”

RainBIrd Controllers

Room for one controller
Room for two controllers

heavy-duty enclosures
stainless steel
THE ULTIMATE FRONT ENTRY ENCLOSURE
WEATHER RESISTANT—VANDAL RESISTANT
• 100% stainless steel construction assures long-term, rustproof durability and additional strength
• Three point locking mechanism, flush mounted access handle and heavy duty continuous hinge ensures
maximum security
• Removable, predrilled backboard provides for easy installation and an attractive finished product
• Chameleon effect of the natural brushed stainless steel finish provides an unobtrusive quality
• Large door mounted storage area and literature storage pocket provides easy access to plans and
scheduling information
• Filtered side louvers at bottom and top allow passive cross flow ventilation
• Mounting template, stainless steel anchors and instructions
• Ten year limited warranty
• NEMA TYPE 3R rated UL Listed
• All stainless steel enclosures may be powder coated in many colors at an additional charge

SB-18SS
18” Wide Enclosure
•
•
•
•
•

18” Wide, 36” High, 12” Deep
NEMA TYPE 3R Weatherproof
Three point locking door
Padlock security provisions
Mounting template and
J bolt anchors

SPECIFICATION ON PAGE 41

PED-18SS
12” Riser Pedestal
• 18” Wide, 12” High, 10” Deep
• Stainless steel
• Hardware installed

heavy-duty enclosures
stainless steel
SB-1852SS
Service Pedestal
Companion Enclosure
•
•
•
•
•

18” Wide, 52” High, 12” Deep
NEMA TYPE 3R Weatherproof
Three point locking door
Padlock security provisions
Mounting template and
J bolt anchors

SPECIFICATION ON PAGE 41

SB-24SS
24” Wide Enclosure
•
•
•
•
•

24” Wide, 36” High, 12” Deep
NEMA TYPE 3R Weatherproof
Three point locking door
Padlock security provisions
Mounting template and
J bolt anchors
SPECIFICATION ON PAGE 41

PED-24SS
12” Riser Pedestal
• 24” Wide, 12” High, 10” Deep
• Stainless steel
• Hardware installed

SB-36SS
36” Wide Enclosure
•
•
•
•
•

36” Wide, 36” High, 12” Deep
NEMA TYPE 3R Weatherproof
Three point locking door
Padlock security provisions
Mounting template and
J bolt anchors
SPECIFICATION ON PAGE 41

PED-36SS
12” Riser Pedestal
• 36” Wide, 12” High, 10” Deep
• Stainless steel
• Hardware installed

heavy-duty enclosures
stainless steel
SB-18DSS

Service Pedestal
•
•
•
•
•

18” Wide, 36” High, 24” Deep
NEMA TYPE 3R Weatherproof
Three point locking door
Padlock security provisions
Mounting template and
J bolt anchors
SPECIFICATION ON PAGE 41

PED-18DSS

12” Riser Pedestal
• 18” Wide, 12” High, 20” Deep
• Stainless steel
• Hardware installed

SB-24DSS

24” Wide Double Door
Enclosure
•
•
•
•
•

24” Wide, 36” High, 24” Deep
NEMA TYPE 3R Weatherproof
Three point locking door
Padlock security provisions
Mounting template and
J bolt anchors
SPECIFICATION ON PAGE 41

PED-24DSS

12” Riser Pedestal

• 24” Wide, 12” High, 20” Deep
• Stainless steel
• Hardware installed

heavy-duty ENCLOSURES
top entry – stainless steel
THE ULTIMATE TOP ENTRY ENCLOSURE
WEATHER RESISTANT—VANDAL RESISTANT
• 100% stainless steel construction assures long-term, rustproof durability and additional strength
• Three point locking mechanism, flush mounted access handle and heavy duty continuous hinge
ensures maximum security
• Removable, predrilled backboard and trays provide for easy installation of controllers
• Chameleon effect of the natural brushed stainless steel finish provides an unobtrusive quality
• 38” height with flip top access provides ease of viewing and programming
• Filtered side louvers at bottom and top allow passive cross flow ventilation
• Mounting template, stainless steel anchors and instructions
• Ten year limited warranty
• NEMA TYPE 3R rated UL Listed
• All stainless steel enclosures may be powder coated in many colors at an additional charge

SB-16SS

16” Wide Enclosure
•
•
•
•
•

16” Wide, 38” High, 15.5" Deep
NEMA TYPE 3R Weatherproof
Three point locking door
Padlock security provisions
Mounting template and
J bolt anchors
• Standard tray and backboards
included
SPECIFICATION ON PAGE 42

SB-22SS

24” Wide Enclosure
•
•
•
•
•

24” Wide, 38” High, 17” Deep
NEMA TYPE 3R Weatherproof
Three point locking door
Padlock security provisions
Mounting template and
J bolt anchors
• Standard tray and backboards
included
SPECIFICATION ON PAGE 42

heavy-duty enclosures
WALL MOUNT– stainless steel
THE ULTIMATE WALL MOUNT ENCLOSURE
WEATHER RESISTANT – VANDAL RESISTANT
• 100% stainless steel construction assures long-term, rust-proof durability and additional strength
• Wall mount brackets provide strength and security, while bottom plate includes conduit holes
• Three point locking mechanism, flush mounted access handle and heavy duty continuous hinge
ensures maximum security
• Removable, predrilled backboard and trays provide for easy installation of controllers
• Chameleon effect of the natural brushed stainless steel finish provides an unobtrusive quality
• Filtered side louvers at bottom and top allow passive cross flow ventilation
• Mounting template, stainless steel anchors and instructions
• Ten year limited warranty
• NEMA TYPE 3R rated UL Listed
• All stainless steel enclosures may be powder coated in many colors at an additional charge

SB-16SSW

16” Wide Enclosure
• 16” Wide, 18” High, 10” Deep
• Two point locking door
• Padlock security provisions
SPECIFICATION ON PAGE 43

PED-16SSW
4” Riser Pedestal
• 16” Wide, 4” High, 8” Deep

SB-18SSW

18” Wide Enclosure
•
•
•
•
•

18” Wide, 36” High, 12” Deep
NEMA TYPE 3R Weatherproof
Three point locking door
Padlock security provisions
Wall mount brackets and
bottom plate

SPECIFICATION ON PAGE 43

heavy-duty ENCLOSURES
WALL MOUNT– stainless steel
THE ULTIMATE WALL MOUNT ENCLOSURE
WEATHER RESISTANT – VANDAL RESISTANT
• 100% stainless steel construction assures long-term, rust-proof durability and additional strength
• Wall mount brackets provide strength and security, while bottom plate includes conduit holes
• Three Point locking mechanism, flush mounted access handle and heavy duty continuous hinge
ensures maximum security
• Removable, predrilled backboard and trays provide for easy installation of controllers
• Chameleon effect of the natural brushed stainless steel finish provides an unobtrusive quality
• Filtered side louvers at bottom and top allow passive cross flow ventilation
• Mounting template, stainless steel anchors and instructions
• Ten year limited warranty
• NEMA TYPE 3R rated UL Listed
• All stainless steel enclosures may be powder coated in many colors at an additional charge

SB-24SSW

24” Wide Enclosure
• 24” Wide, 36” High, 12” Deep
• NEMA TYPE 3R Weatherproof
• Conduit openings in
bottom plate
• Padlock security provisions
• Wall mount brackets
SPECIFICATION ON PAGE 43

SB-36SSW

36” Wide Enclosure
• 36” Wide, 36” High, 12” Deep
• NEMA TYPE 3R Weatherproof
• Conduit openings in
bottom plate
• Padlock security provisions
• Wall mount brackets
SPECIFICATION ON PAGE 43

heavy-duty enclosures
stainless steel
NEMA 3SX & 4X ENCLOSURES AVAILABLE FOR OEM DESIGN
WEATHER RESISTANT – VANDAL RESISTANT
The StrongBox NEMA TYPE 3SX Series was designed to
operate even in the coldest climates with ice formation
around cabinet. Our 3SX Series is available as wall mount
or pedestal mount. When covering electronics or controllers
and protecting them from the harsh elements like snow and
ice buildup, then we have the enclosure for you.
•
•
•
•
•
•
•

Water tight, dust proof, operable when ice laden
14 gauge 304 stainless steel
Three point locking pad lockable handle
Removable backboard
NEMA rated, UL listed
Ten year limited warranty
Contact us for more information

NEMA Enclosure Types
Type 3R:
Enclosures constructed for either indoor or outdoor use to
provide a degree of protection to personnel against access
to hazardous parts; to provide a degree of protection of the
equipment inside the enclosure against ingress of solid foreign objects (falling dirt); to provide a degree of protection
with respect to harmful effects on the equipment due to the
ingress of water (rain, sleet, snow); and that will be undamaged by the external formation of ice on the enclosure.
Type 3SX:
Enclosures constructed for either indoor or outdoor use to
provide a degree of protection to personnel against access
to hazardous parts; to provide a degree of protection of the
equipment inside the enclosure against ingress of solid
foreign objects (falling dirt and windblown dust); to provide
a degree of protection with respect to harmful effects on the
equipment due to the ingress of water (rain, sleet, snow);
that provides an additional level of protection against
corrosion; and for which the external mechanism(s) remain
operable when ice laden.
Type 4X:
Enclosures constructed for either indoor or outdoor use to
provide a degree of protection to personnel against access
to hazardous parts; to provide a degree of protection of the
equipment inside the enclosure against ingress of solid foreign objects (windblown dust); to provide a degree of protection with respect to harmful effects on the equipment due
to the ingress of water (rain, sleet, snow, splashing water,
and hose directed water); that provides an additional level
of protection against corrosion; and that will be undamaged
by the external formation of ice on the enclosure.

LIGHT DUTY ENCLOSURES
PEDESTAL – stainless steel
THE WEATHER RESISTANT CABINET
• 100% stainless steel construction assures long-term, rustproof durability and additional strength
• Flush mounted removable door with keyed camlock,
• Chameleon effect of the natural brushed stainless steel finish provides an unobtrusive quality
• Filtered side louvers at bottom and top allow passive cross flow ventilation
• Mounting template, stainless steel anchors and instructions
• Ten year limited warranty
• NEMA TYPE 3R rated UL Listed
• All stainless steel enclosures may be powder coated in various colors at an additional charge

LD-16S

17” Wide Enclosure
•
•
•
•

16.75” Wide, 30” High, 8.25" Deep
NEMA TYPE 3R Weatherproof
Drop in keyed locking door
Mounting template and
J bolt anchors

SPECIFICATION ON PAGE 44

LIGHT DUTY ENCLOSURES
wall mount – stainless steel
LD-16SW

16” Wide Light Duty
Enclosure
• 16.75” Wide, 30” High, 8” Deep
• NEMA TYPE 3R Weatherproof
• Hinged keyed lock door
SPECIFICATION ON PAGE 45

LD-18SW
18” Wide Wall Mount
Cabinet
• 18” Wide, 18” High, 8” Deep
• NEMA TYPE 3R Weatherproof
• Hinged keyed lock door
SPECIFICATION ON PAGE 46

BACKFLOW COVER
SIZE CHART
Apollo
4A-200 Series
3/4"
1"
1 1/4"
1 1/2"
2"

FEBCO
825Y & LF860
3/4"
1"
1 1/4"
1 1/2"
2"

LF860
2 1/2"
3"
4"
6"

825YA
3/4"
1"
1 1/2"
2"

LF880V
2 1/2"
3"
4"
6"

Watts
U009AQT
3/4"
1"
1 1/2"
2"

U009QT
3/4"
1"
1 1/4"
1 1/2"
2"

909
2 1/2"
3"
4"
6"

Length
12.75
14.75
18.75
18.75
20.25

Installed
20.00
20.00
22.00
22.00
23.00

nip
3.00
3.00
3.00
3.00
3.00

nip total
5.00
5.00
5.00
5.00
5.00

elbow total
4.00
5.00
5.50
6.00
7.50

Total inches
21.75
24.75
29.25
29.75
32.75

Length
12.00
12.75
16.00
17.00
17.75

Installed
19.00
20.00
22.00
22.00
22.00

nip
3.00
3.00
3.00
3.00
3.00

nip total
5.00
5.00
5.00
5.00
5.00

elbow total
4.00
5.00
5.50
6.00
7.50

Total inches
21.00
22.75
26.50
28.00
30.25

Length
40.75
42.00
46.25
56.00

Installed
38.50
44.25
46.50
53.25

nip
n/a
n/a
n/a
n/a

nip total
n/a
n/a
n/a
n/a

elbow total
17.00
18.50
22.00
27.00

Total inches
57.75
60.50
68.25
83.00

Length
10.00
10.25
14.25
15.00

Installed
17.00
18.00
19.00
20.00

nip
n/a
n/a
n/a
n/a

nip total
n/a
n/a
n/a
n/a

elbow total
n/a
n/a
n/a
n/a

Total inches
10.00
10.25
14.25
15.00

Length
25.50
25.75
28.00
32.25

Installed
32.00
32.00
36.00
39.00

nip
n/a
n/a
n/a
n/a

nip total
n/a
n/a
n/a
n/a

elbow total
n/a
n/a
n/a
n/a

Total inches
25.50
25.75
28.00
32.25

M2AQT
Length
16.25
17.50
20.50
25.50

Installed
22.00
23.00
24.00
24.00

nip
n/a
n/a
n/a
n/a

nip total
n/a
n/a
n/a
n/a

elbow total
n/a
n/a
n/a
n/a

Total inches
16.25
17.25
20.50
25.50

M2QT
Length
13.75
17.50
24.50
25.50
27.50

Installed
22.00
23.00
24.00
24.00
24.00

nip
3.00
3.00
3.00
3.00
3.00

nip total
5.00
5.00
5.00
5.00
5.00

elbow total
4.00
5.00
5.50
6.00
7.50

Total inches
23.00
27.50
35.00
36.50
40.00

RPDA
Length
42.25
42.25
55.25
66.00

Installed
34.00
37.00
41.00
49.00

nip
n/a
n/a
n/a
n/a

nip total
n/a
n/a
n/a
n/a

elbow total
17.00
18.50
22.00
27.00

Total inches
59.25
60.75
77.25
93.00

Alum

Smooth

Expanded

SBBC-30AL
SBBC-30AL
SBBC-45AL
SBBC-45AL
SBBC-45AL

SBBC-30SS & CR
SBBC-30SS & CR
SBBC-45SS & CR
SBBC-45SS & CR
SBBC-45SS & CR

BC-30CR
BC-30CR
BC-45CR
BC-45CR
BC-45CR

Alum

Smooth

Expanded

SBBC-30AL
SBBC-30AL
SBBC-30AL
SBBC-45AL
SBBC-45AL

SBBC-30SS & CR
SBBC-30SS & CR
SBBC-30SS & CR
SBBC-45SS & CR
SBBC-45SS & CR

BC-30CR
BC-30CR
BC-30CR
BC-45CR
BC-45CR

Alum

Smooth

Expanded

SBBC-75ALHP
N/A
N/A
N/A

SBBC-75SS & CR
N/A
N/A
N/A

BC-75CR
N/A
N/A
N/A

Alum

Smooth

Expanded

SBBC-22AL
SBBC-22AL
SBBC-22AL
SBBC-22AL

SBBC-22SS & CR
SBBC-22SS & CR
SBBC-22SS & CR
SBBC-22SS & CR

BC-30CR
BC-30CR
BC-30CR
BC-30CR

Alum

Smooth

Expanded

SBBC-40ALHP
SBBC-40ALHP
SBBC-40ALHP
SBBC-40ALHP

SBBC-40SS & CR
SBBC-40SS & CR
SBBC-40SS & CR
SBBC-40SS & CR

BC-75CR
BC-75CR
BC-75CR
BC-75CR

Alum

Smooth

Expanded

SBBC-22AL
SBBC-22AL
SBBC-30AL
SBBC-30AL

SBBC-22SS & CR
SBBC-22SS & CR
SBBC-30SS & CR
SBBC-30SS & CR

BC-30CR
BC-30CR
BC-30CR
BC-30CR

Alum

Smooth

Expanded

SBBC-30AL
SBBC-30AL
SBBC-45AL
SBBC-45AL
SBBC-45AL

SBBC-30SS & CR
SBBC-30SS & CR
SBBC-45SS & CR
SBBC-45SS & CR
SBBC-45SS & CR

BC-30CR
BC-30CR
BC-45CR
BC-45CR
BC-45CR

Alum

Smooth

Expanded

SBBC-75ALHP
SBBC-75ALHP
N/A
N/A

SBBC-75SS & CR
SBBC-75SS & CR
N/A
N/A

BC-75CR
BC-75CR
BC-75CR
N/A

1 1/4"
1 1/2"
2"

24.50
25.50
27.50

24.00
24.00
24.00

3.00
3.00
3.00

5.00
5.00
5.00

5.50
6.00
7.50

35.00
36.50
40.00

909

RPDA
Length
42.25
42.25
55.25
66.00

Installed
34.00
37.00
41.00
49.00

nip
n/a
n/a
n/a
n/a

nip total
n/a
n/a
n/a
n/a

elbow total
17.00
18.50
22.00
27.00

Total inches
59.25
60.75
77.25
93.00

3/4"
1"
1 1/4"
1 1/2"
2"

XL/VSR
Length
12.75
15.75
20.50
21.75
24.25

Installed
20.00
20.50
22.00
23.00
25.00

nip
3.00
3.00
3.00
3.00
3.00

nip total
5.00
5.00
5.00
5.00
5.00

elbow total
4.00
5.00
5.50
6.00
7.50

Total inches
21.75
25.75
31.00
32.75
36.75

2 1/2"
3"
4"
6"

31.00
32.00
38.00
45.00

33.00
34.00
38.00
44.00

n/a
n/a
n/a
n/a

17.00
18.50
22.00
27.00

48.00
50.50
60.00
72.00

975

XL/XL2V
Length
15.00
16.00
17.00
17.50
18.50

Installed
22.00
23.00
24.00
24.00
24.00

nip
3.00
3.00
3.00
3.00
3.00

nip total
5.00
5.00
5.00
5.00
5.00

elbow total
4.00
5.00
5.50
6.00
7.50

Total inches
24.00
26.00
27.50
28.50
31.00

Installed
34.00
36.00
36.00
38.00

nip
n/a
n/a
n/a
n/a

nip total
n/a
n/a
n/a
n/a

elbow total
n/a
n/a
n/a
n/a

Total inches
34.00
36.00
36.00
38.00

2 1/2"
3"
4"
6"

Wilkins
375

3/4"
1"
1 1/4"
1 1/2"
2"

475
2 1/2"
3"
4"
6"

Length
33.00
34.00
42.00
48.00

Inside Dimensions
SBBC-22SS/CR
SBBC-30SS/CR

Wt.
43
53

Length
20
27

Width
14
14

Height
27
27

SBBC-30AL
SBBC-45AL
SBBC-60AL

51
67
82

27
42
57

14
14
14

27.5
27.5
27.5

SBBC-45SS/CR
61
42
14
27
SBBC-20SS
53
18
14
48.5
SBBC-40SS/CR
80
38
23
37.5
SBBC-75SS/CR
150
72
23
37.5

SBBC-15AL
35
11.75
14
27.5

SBBC-40ALHP
88
38
21.5
37.5
SBBC-60ALHP
118
58
21.5
37.5
SBBC-75ALHP
128
73
21.5
37.5
SBBC-90ALHP
158
88
21.5
37.5

PE-40AL
98
38
36
37.5
PE-60AL
128
58
36
37.5

BC-30CR/CRG
45
27
9
25
BC-45CR/CRG
73
42
15
31
BC-75CR/CRG
160
72
27
43

SBBC-45AL
SBBC-45AL
SBBC-45AL

SBBC-45SS & CR
SBBC-45SS & CR
SBBC-45SS & CR

BC-45CR
BC-45CR
BC-45CR

Alum

Smooth

Expanded

N/A
N/A

BC-75CR
N/A

Alum

Smooth

Expanded

SBBC-30AL
SBBC-30AL
SBBC-45AL
SBBC-45AL
SBBC-45AL

SBBC-30SS & CR
SBBC-30SS & CR
SBBC-45SS & CR
SBBC-45SS & CR
SBBC-45SS & CR

BC-30CR
BC-30CR
BC-45CR
BC-45CR
BC-45CR

SBBC-60ALHP
SBBC-60ALHP
SBBC-75ALHP
SBBC-90ALHP

SBBC-75SS & CR
SBBC-75SS & CR
SBBC-75SS & CR
N/A

BC-75CR
BC-75CR
BC-75CR
N/A

Alum

Smooth

Expanded

SBBC-30AL
SBBC-30AL
SBBC-30AL
SBBC-45AL
SBBC-45AL

SBBC-30SS & CR
SBBC-30SS & CR
SBBC-30SS & CR
SBBC-45SS & CR
SBBC-45SS & CR

BC-30CR
BC-30CR
BC-30CR
BC-45CR
BC-45CR

Alum

Smooth

Expanded

SBBC-40ALHP
SBBC-40ALHP
N/A
N/A

SBBC-40SS & CR
SBBC-40SS & CR
N/A
N/A

BC-75CR
BC-75CR
BC-75CR
N/A

BACKFLOW COVER
SBBC-75ALHP
SBBC-75SS & CR
BC-75CR
SIZE
CHART
SBBC-75ALHP
SBBC-75SS
& CR
BC-75CR

BACKFLOW enclosures
ALUMINUM
VANDAL-RESISTANT EASY ACCESS
BACKFLOW ENCLOSURE
• Marine grade aluminum alloy construction provides lasting durability and strength, with light weight for
ease of handling
• 100% stainless steel hardware assures long-term, rust proof durability and additional strength
• Enclosures secured to mounting hardware providing easy access for service and repair
• Flush-mounted locking mechanism and solid sheet construction ensures maximum security
• Chameleon effect of the natural finish provides an unobtrusive quality
• Five year limited warranty
• All aluminum enclosures may be powder coated in many colors at an extra charge

Low Profile Enclosure
“A” Length Height

Width

SBBC-22AL 22”

30”

16.25”

SBBC-30AL 30”

30”

16.25”

SBBC-45AL 45”

30”

16.25”

Note: For inside dimensions, see Backflow Cover
Sizing Chart on pages 14-15.

•
•
•
•

Marine grade aluminum
Stainless steel hardware
Weather resistant
Patented locking system accepts padlock

Contractor installed
concrete pad

SPECIFICATION ON PAGE 48

High Profile Two Piece
Enclosure
“A” Length Height

Width

SBBC-40ALHP 40”

39”

24”

SBBC-60ALHP 60”

39”

24”

SBBC-75ALHP 75”

39”

24”

SBBC-90ALHP 90”

39”

24”

Note: For inside dimensions, see Backflow Cover
Sizing Chart on pages 14-15.

•
•
•
•

Marine grade aluminum
Stainless steel hardware
Weather resistant
Patented locking system accepts padlock
SPECIFICATION ON PAGE 49

Contractor installed
concrete pad

INSULATED BACKFLOW enclosures
ALUMINUM
ALL WEATHER INSULATED
BACKFLOW ENCLOSURE
• Marine grade aluminum alloy construction provides lasting durability and strength, with light weight for
ease of handling
• 100% stainless steel hardware assures long-term, rust proof durability and additional strength
• Enclosures secured to mounting hardware providing easy access for service and repair
• Flush-mounted locking mechanism and solid sheet construction ensures maximum security
• Chameleon effect of the natural finish provides an unobtrusive quality
• R-19 insulation value Polar Bearier Blanket*
• Flexible rubber skirt provides protection from wind but allows drainage
• Five year limited warranty
• All aluminum enclosures may be powder coated in many colors at an extra charge
*Polar Bearier Blankets for insulating backflow devices included as insulation for insulated enclosures

Low Profile Insulated
Enclosure
“A” Length Height

Width

SBBC-22ALI 22”

30”

16.25”

SBBC-30ALI 30”

30”

16.25”

SBBC-45ALI 45”

30”

16.25”

Note: For inside dimensions, see Backflow Cover
Sizing Chart on pages 14-15.

•
•
•
•

Marine grade aluminum
Stainless steel hardware
Weather resistant
Patented locking system accepts padlock

Contractor installed
concrete pad

SPECIFICATION ON PAGE 50

High Profile Insulated Two
Piece Enclosure
“A” Length Height Width
SBBC-40ALHPI 40”

39”

24”

SBBC-60ALHPI 60”

39”

24”

SBBC-75ALHPI 75”

39”

24”

SBBC-90ALHPI 90”

39”

24”

Note: For inside dimensions, see Backflow Cover
Sizing Chart on pages 14-15.

•
•
•
•

Marine grade aluminum
Stainless steel hardware
Weather resistant
Patented locking system accepts padlock

SPECIFICATION ON PAGE 51
17

Contractor installed
concrete pad

pump & power conditioner
aluminum
VANDAL RESISTANT EASY ACCCESS
PUMP AND POWER CONDITIONERS ENCLOSURE
• Marine grade aluminum alloy construction provides lasting durability and strength, with light weight for
ease of handling
• 100% stainless steel hardware assures long-term rust proof durability and additional strength
• Full release locking mechanism requires no tools and provides easy access for service and repair
• Flush-mounted locking mechanism and sollid sheet construction ensures maximum security
• Chameleon effect of the natural finish provides an unobtrusive quality
• Five year limited warranty
• All aluminum enclosures may be powder coated in many colors at an additional charge

Power Conditioner Enclosure
“A” Length Height Width
SBBC-40ALHPPC 40”

39”

24”

•
•
•
•

Marine grade aluminum
Stainless steel hardware
Weather resistant
Patented locking system
accepts padlock
• Removable without tools

Contractor installed
concrete pad

SPECIFICATION ON PAGE 49

Pump Enclosure
“A” Length

Height

Width

PE-40AL

40”

39”

38”

PE-60AL

60"

39"

38"

•
•
•
•

Marine grade aluminum
Stainless steel hardware
Weather resistant
Patented locking system
accepts padlock
• Removable without tools
SPECIFICATION ON PAGE 47

Contractor installed
concrete pad

BACKFLOW enclosures
COLD ROLLED STEEL
EXPANDED METAL VANDAL RESISTANT
BACKFLOW COVER
• 1½” number 9, flattened expanded metal allows full viewing of backflow preventer
• Cold rolled, formed steel frame provides strength and stability
• Lock tab provides for use of padlock
• Easy lift handles and hinges access provides for service and testing
• Coated with a performance polymer alloy coating to prevent handling injury.
• Open diamond-patterned panels minimizes surface area for graffiti
• One year limited warranty
• Standard colors for powder coated enclosures are dark green and tan. All other colors are available at
an extra charge

Low Profile Expanded
Metal Cover
“A” Length Height Width
BC-30CR

30”

25.5”

12”

BC-45CR

45”

31.5”

18”

Note: For inside dimensions, see Backflow
Cover Sizing Chart on pages 14-15.

•
•
•
•

Plasticote powder coat finish
Accepts padlock
Hinged for easy access
Minimized surface area
for graffiti

Contractor installed
concrete pad

SPECIFICATION ON PAGE 56

High Profile Expanded
Metal Cover
“A” Length Height Width
BC-75CR

75”

43.5”

30”

Note: For inside dimensions, see Backflow
Cover Sizing Chart on pages 14-15.

•
•
•
•

Plasticote powder coat finish
Accepts padlock
Hinged for easy access
Minimized surface area
for graffiti
SPECIFICATION ON PAGE 57

Contractor installed
concrete pad

BACKFLOW enclosures
stainless steel
SMOOTH TOUCH™ VANDAL RESISTANT
BACKFLOW ENCLOSURE
• Tube and wire construction provides a smooth surface to protect against handling injury
• Architectural lines of the enclosure blend beautifully into the landscape environment
• 100% stainless steel construction assures long-term, rustproof durability and additional strength
• Ten year limited warranty
• All stainless steel enclosures may be powder coated in many colors at an extra charge

Low Profile Smooth Touch™
Enclosure
“A” Length Height

Width

SBBC-22SS

23.5”

28”

17.75”

SBBC-30SS

31.5”

28”

17.75”

SBBC-45SS

46.5”

28”

17.75”

Note: For inside dimensions, see Backflow
Cover Sizing Chart on pages 14-15.

•
•
•
•

100% stainless steel
Stainless steel hardware
Weather resistant
Patented locking system
accepts padlock
• Minimal surface area deters graffiti

Contractor installed
concrete pad

SPECIFICATION ON PAGE 52

High Profile Smooth Touch™
Enclosure
“A” Length

Height

Width

SBBC-20SS

20”

46.5”

17.75”

SBBC-40SS

40”

39”

25.5”

39”

25.5”

SBBC-75SS 76.5”

Note: For inside dimensions, see Backflow
Cover Sizing Chart on pages 14-15.

•
•
•
•

100% stainless steel
Stainless steel hardware
Weather resistant
Patented locking system
accepts padlock
• Minimal surface area deters graffiti
SPECIFICATION ON PAGE 53

Contractor installed
concrete pad

BACKFLOW enclosures
COLD ROLLED STEEL
SMOOTH TOUCH™ VANDAL RESISTANT
BACKFLOW ENCLOSURE
• Tube and wire construction provides a smooth surface to protect against handling injury
• Architectural lines of the enclosure blend beautifully into the landscape environment
• Coated with a performance polymer alloy coating to prevent handling injury.
• One year limited warranty
• Standard colors for powder coated enclosures are dark green and tan. All other colors are available at
an extra charge

Low Profile Smooth Touch™
Enclosure
“A” Length

Height

Width

SBBC-22CR 23.5”

28”

17.75”

SBBC-30CR 31.5”

28”

17.75”

SBBC-45CR 46.5”

28”

17.75”

Note: For inside dimensions, see Backflow
Cover Sizing Chart on pages 14-15.

•
•
•
•

100% stainless steel
Stainless steel hardware
Weather resistant
Patented locking system
accepts padlock
• Minimal surface area deters graffiti

Contractor installed
concrete pad

SPECIFICATION ON PAGE 54

High Profile Smooth Touch™
Enclosure
“A” Length Height
SBBC-40CR

40”

SBBC-75CR 76.5”

Width

39”

25.5”

39”

25.5”

Note: For inside dimensions, see Backflow
Cover Sizing Chart on pages 14-15.

•
•
•
•

100% stainless steel
Stainless steel hardware
Weather resistant
Patented locking system
accepts padlock
• Minimal surface area deters graffiti
SPECIFICATION ON PAGE 55

Contractor installed
concrete pad

POLAR BEARIER
SLIP-ON INSULATING COVER
• Polar Bearier helps prevent
freeze damage to backflow
devices.
• Provides vandal resistant
protection to backflow devices.
• Reduces liability by cushioning
backflow devices.
• Reduces time and materials
wasted on annual backflow
wrapping.
• Can be installed inside
existing backflow enclosures.
• Provides an aesthetic
alternative to exposed
backflow devices.

A simple, effective, and stylish
way to insulate backflow devices
to help prevent freezing. The
Polar Bearier is a slip-on insulating cover that installs in seconds
and removes even quicker for
backflow maintenance. This
unique device uses space
age insulation materials to provide R-19 insulation while
maintaining a sleek and
attractive appearance.
The construction materials
include:
1. A heavy-duty, water repellent
exterior cover of acrylic
impregnation coated polyester
fabric. Standard colors is forest green. This marine fabric is
guaranteed for a five year period against excessive loss of
color or strength under normal
exposure conditions. The
cover has been designed to
be removable. Custom exterior
colors as well as silk screened
agency logos are available by
special order.
2. A layer of Radiant Barrier Foil
(RBF) that blocks 97% of radi-

ant heat. This material consists
of a layer of polyethylene bubbles bonded to and sandwiched between two industrial
strength aluminum foil sheets.
This material is impervious to
moisture, does not promote
fungus or bacteria growth and
is unsuitable for pest nesting
material.
3. A 1/4" thick polyolefin foam
layer for added additional
insulation also provides support to the Polar Bearier.
4. R-19 Polar Beariers use a
second layer of RBF to provide
added insulation.
5. A water repellent lining of 200
denier nylon fabric to resist
tears from backflow parts.
6. A Velcro® strip at the base of
the Polar Bearier closes the
system to prevent drafts and
allows water to exit the cover
should the backflow unit develop a leak.
7. Brass grommets at the base of
the Polar Bearier allow for multiple pad lock security.

Why continue to wrap your backflow devices with lumpy fiberglass and tape when you can
simply slip on a Polar Bearier?
Wrapping a backflow device is
expensive and the wrap must be
replaced annually or when the
fiberglass becomes wet in order
to retain the insulating value. In
fact, compression of the fiberglass material during wrapping
significantly reduces the insulating or "R" value. On average a
Polar Bearier can be installed on
a backflow device for about 1½
times the cost of one year’s
wrapping with ineffective fiberglass and tape.

POLAR BEARIER
SPECIFICATIONS

Specification of the correct Polar
Bearier for your project can be
easily accomplished by using the
following product information.
Backflow devices installed in
areas where long freezing periods can be anticipated should
be drained or protected with
backflow heating devices.
Determine the height of the backflow device above finished
grade. Keep in mind that most
local codes require that the bottom of the backflow device be
12" above finished grade. Most
1½" and 2" backflow device
assemblies installed to code will
be between 20" and 24" high.

Part No.
PBB-15
PBB-22
PBB-30
PBB-45
PBB-60
PBB-40HP
PBB-60HP
PBB-75HP
PBB-90HP
PBB-20HP
23

Use a 24" high Polar Bearier for
these applications.
Pressure backflow devices
installed 12" above the highest
head will often require the use
of the larger 34" and 46" high
Polar Beariers.
The length of the backflow
device assembly is the most difficult dimension to determine. The
length of the assembly will be
based on the type of backflow
device used, the size and type of
additional equipment such as
regulators and wye strainers, the
location of the additional equipment on the assembly, and the
length of the nipples between

Dimensions
16"L x 6"D x 24"H
22"L x 6"D x 24"H
28"L x 6"D x 24"H
46"L x 6"D x 24"H
56"L x 6"D x 24"H
40"L x 6"D x 36"H
60"L x 6"D x 36"H
72"L x 6"D x 36"H
90"L x 6"D x 36"H
24"L x 6"D x 46"H

equipment. Field measurement of
the installed equipment will result
in the best determination of
assembly length. Measure the
overall length of the assembly
and add 6" to find the size of the
backflow cover. If the resulting
measurement falls in between
sizes on the Polar Bearier use
the larger of the two sizes to
insure a correct fit.

commercial meter pedestals
stainless steel
COMMERCIAL METER PEDESTAL
WITH CUSTOMER SECTION
• Provides metered power distribution for street lighting, park lighting, private development lighting,
signage, irrigation, pump, and cellular applications
• 100% stainless steel construction assures long term, rustproof durability and additional strength
• Swingside top allows for full exposure of meter compartment
•
•
•
•
•
•

Top is easier to open and control than fliptops, and locks open for safety
All stainless steel enclosures may be powder coated in various colors at an additional charge
Double door design
Mounting template and anchors included
Ten year limited warranty
NEMA TYPE 3R UL Listed

METER SECTION
• 0-200 amp meter sockets; 4, 5, 7 Jaw available
• 120v, 280v, 240v and 480v models available
• NEMA TYPE 3R Rated UL Listed
• E.U.S.E.R.C. 308 compliant commercial meter pedestal

CUSTOMER SECTION
• Unique design provides large electrical customer compartment but maintains a slim, small cabinet profile
• 0-200 amp load centers with up to 32 circuits
• 20” x 30” customer electrical compartment

MPS-A16-10K* Metered Enclosure
• 100 amp meter/100 amp load center
• 16 Circuits with main breaker, Single Phase

MPS-C20-10K* Metered Enclosure
• 200 amp meter/200 amp load center
• 20 Circuits with main breaker, Single Phase

MPS-C32-10K* Metered Enclosure
• 200 amp meter/200 amp load center
• 32 Circuits with main breaker, Single Phase

MPS-D18-10K* Metered Enclosure
• 100 amp meter/100 amp load center
• 18 Circuits with main breaker, Three Phase

MPS-E24-10K* Metered Enclosure
• 200 amp meter/200 amp load center
• 24 Circuits with main breaker, Three Phase
SPECIFICATION ON PAGE 59-60

meter pedestalS WITH ENCLOSURE
stainless steel
COMMERCIAL SERVICE PEDESTAL WITH CUSTOMER
AND ENCLOSURE SECTIONS

• Provides metered power distribution for street lighting, park lighting, private development lighting,
signage, irrigation, pump, and cellular applications
• 100% stainless steel construction assures long term, rustproof durability and additional strength
• Swingside top allows for full exposure of meter compartment
•
•
•
•
•
•

METER SECTION
• 0-200 amp meter sockets; 4, 5, 7 jaw available
• 120v, 280v, 240v and 480v models available
• NEMA TYPE 3R Rated UL Listed
• E.U.S.E.R.C. 308 compliant commercial meter pedestal

CUSTOMER SECTION
• Unique design provides large electrical customer compartment
but maintains a slim, small cabinet profile
• 0-200 amp load centers with up to 32 circuits
• 20” x 30” customer electrical compartment

ENCLOSURE SECTION

• Removable backboards provides for easy installation and an
attractive finished product
• Large door-mounted storage area provides access to plans
and scheduling information
• Side louvers at bottom and top allow cross flow ventilation

MPE-A16-10K* Metered Enclosure

MPE-D18-10K* Metered Enclosure

MPE-C20-10K* Metered Enclosure

MPE-E24-10K* Metered Enclosure

• 100 amp meter/100 amp load center
• 16 Circuits with main breaker, Single Phase
• 200 amp meter/200 amp load center
• 20 Circuits with main breaker, Single Phase

MPE-C32-22K* Metered Enclosure
• 200 amp meter/200 amp load center
• 32 Circuits with main breaker, Single Phase

• 100 amp meter/100 amp load center
• 18 Circuits with main breaker, Three Phase
• 200 amp meter/200 amp load center
• 24 Circuits with main breaker, Three Phase
SPECIFICATION ON PAGE 61-62

* All meter pedestals available with AIC ratings of 22k, 65k and higher.
Photocell, time clocks, lighting contractors and circuit breakers available factory installed.

COMMERCIAL SERVICE PEDESTAL
STAINLESS STEEL
COMMERCIAL SERVICE PEDESTAL
• Provides metered power distribution for street lighting, parking lot lighting, private development lighting,
signage, irrigation, pump stations, and cellular applications
• Caltrans Type III-AF and Caltrans Spec ES-2D compliant
• 100% stainless steel welded construction provides ultimate protection against corrosion and vandalism
• Flip top allows for full exposure of meter compartment
• Top locks accept 5/16 padlock and utility seal
• All stainless steel construction
• Optional colors, standard gray
• Weather and vandal resistant

FEATURES

SPECIFICATIONS

• Standard Voltage 120/240 V, 1
Phase 3W
• Meter Socket: 4 Jaw, 100 Amp
• Main Breaker: 100 Amp, 10K AIC
• Meter Socket with Test Blocks
• Utility Landing Lugs: 200 Amp
• Flip Top Meter Door
• Load Center Panels or Lug Style
Busses Available
• Access Panels Designed for
Padlock & Utility Seal
• Template with Anchor Bolts
• 5 Year Limited Warranty

• Caltrans Type III-AF Compliant
• Caltrans Spec. ES-2D
Compliant
• 16 Gauge Stainless Steel
Welded Construction
• Vandal Resistant Enclosure
• Listed by Underwriters
Laboratories
• Complies with EUSERC 308
• Rainproof Type 3R Rated
• UL 508A Panel Shop
SPECIFICATION ON PAGE 63

OPTIONS

• Meter Socket: 5 Jaw, 100 Amp
• Maximum Voltage: 240 V, 1
Phase, 3W
• Higher AIC Available: 22K, 42K
• Powdercoat Colors Available
• Optional Time Clock, Lighting &
Contact Block

CSP-A Model Numbers & Service Options
Model No.

Amps

Voltage

AIC Rating

Main

CSP-A106-10K*

100A

120/240

10,000

100A

CSP-A106-42K*

100A

120/240

42,000

100A

CSP-A112-10K*

100A

120/240

10,000

100A

CSP-A112-42K*

100A

120/240

42,000

100A

* Series AIC Ratings Available: 10K, 22K, 42K, 65K
#4 at end of part number signifies brushed stainless finish

COMMERCIAL SERVICE PEDESTAL
STAINLESS STEEL
CSP-A SERIES METERED ENCLOSURE

Designed to supply metered power to remote locations. Typical
applications include street lighting, traffic signal circuits, parking
lot lighting, highway and pump stations and cellular applications.

METER SECTION
HOOD ROTATES UP

READING COVER 3/16”
POLYCARB UV PLASTIC
VIEWING WINDOW

METER SOCKET
TEST BYPASS
BLOCKS
METER SECTION
HOOD ROTATES UP

PADLOCK
HASP

LANDING LUGS
#6-250 MCM
AL/CU

READING
COVER 3/16”
UNMETERED
POLYCARB
UV PLASTIC
BRANCH
BREAKERS
VIEWING WINDOW

LANDING
LUGS

MAIN BREAKERS
METER SOCKET

METERED BRANCH
BREAKERS
UTILITY
DOOR

TEST BYPASS
BLOCKSHASP
PADLOCK

REMOVE UTILITY SEALABLE
SIDE DOOR FOR ACCESS TO
LANDING LUGS AND
PADLOCK
TERMINATION SECTION
HASP

SPLIT DEADFRONT
CONTACTORS

LANDING LUGS
#6-250 MCM
GROUNDING
AL/CU LUG
SERVICE CONDUIT
3” MAXIMUM SIZE

FINISHED GRADE

MAIN BREAKERS

2” LOAD CONDUITS
METERED BRANCH
BREAKERS

GROUNDING ROD
SEE STANDARDS
FOR SIZING
UTILITY
DOOR

CONCRETE
FOUNDATION

2”

UNMETERED
BRANCH BREAKERS

LANDING
HINGEDLUGS
DEADFRONT

PADLOCK HASP

REMOVE UTILITY SEALABLE
SIDE DOOR FOR ACCESS TO
LANDING LUGS AND
TERMINATION SECTION

24”

SPLIT DEADFRONT
CONTACTORS

GROUNDING LUG
GALV. ANCHOR BOLTS
5/8” X 16” X 4”
WITH 90 DEGREE BEND
(4 REQUIRED)
2”

SERVICE CONDUIT
3” MAXIMUM SIZE

HINGED DEADFRONT
2” LOAD CONDUITS

GROUNDING ROD
SEE STANDARDS
FOR SIZING

CONCRETE
FOUNDATION
FINISHED GRADE

SIDE VIEW

FRONT VIEW
24”
GALV. ANCHOR BOLTS
5/8” X 16” X 4”
WITH 90 DEGREE BEND
(4 REQUIRED)

S/N

4-JAW
METER

GRD

13/16”

SIDE VIEW
12”

TEST
BLOCKS

METER SPECIFICATIONS

MAIN
BRKR

• 0-100 Amp Load Center with up to
6 Circuits or 12 Circuits
• 120V & 240V 1 Phase Models
Available
WIRING SCHEMATIC
• Test Blocks
• UL Listed, NEMA TYPE 3R Rated
• EUSERC 308 Compliant
Commercial Meter Pedestal
• Cabinet Profile with Removable
Doors
• 12” W x 50” H x 9” D Cabinet
• 12” W x 63” H x 9” D Cabinet
• 5 Year Limited Warranty
N

5.25”

4-JAW
METER

TEST
BLOCKS

7.5”

S/N

8”
GRD

120V/240V
1PH 3 WIRE
SERVICE

FRONT VIEW

GROUNDING
ELECTRODE

MAIN
BRKR

13/16”

MOUNTING SLOTS

BASE FOR SERVICE
EQUIPMENT ENCLOSURE

12”

5.25”

7.5”

8”

120V/240V
1PH 3 WIRE
SERVICE

WIRING SCHEMATIC

GROUNDING
ELECTRODE

MOUNTING SLOTS

BASE FOR SERVICE
EQUIPMENT ENCLOSURE

COMMERCIAL SERVICE PEDESTAL
STAINLESS STEEL
COMMERCIAL SERVICE PEDESTAL
• Provides metered power distribution for street lighting, parking lot lighting, traffic signal circuits, private
development lighting, signage, irrigation, pump stations, and cellular applications
• Caltrans Type III-BF and Caltrans Spec ES-2E compliant
• 100% stainless steel welded construction provides ultimate protection against corrosion and vandalism
• Swingside top allows for full exposure of meter compartment
• Top is easier to open and control than fliptops, and locks out for safety
• All stainless steel construction
• Weather and vandal resistant
• Metered and unmetered available

FEATURES

SPECIFICATIONS

• Standard Voltage 120/240 V, 1
Phase 3W
• Meter Socket: 4 Jaw, 100 Amp
• Main Breaker: 100 Amp,10K AIC
• Meter Socket with Test Blocks
• Utility Landing Lugs: 200 Amp
• Swingside Top Meter Door
• 6-20 Circuit Copper Bussed Interior or Lug Style Busses Available
• Access Panels Designed for
Padlock & Utility Seal
• Template with Anchor Bolts
• 5 Year Limited Warranty

• Caltrans Type III-BF Compliant
• Caltrans Spec. ES-2E Compliant
• 16 Gauge Stainless Steel
Welded Construction
• Vandal Resistant Enclosure
• Listed by Underwriters
Laboratories
• Complies with EUSERC 308
• Rainproof Type 3R Rated
• UL 508A Panel Shop
SPECIFICATION ON PAGE 63

OPTIONS

• Meter Socket: 5 Jaw, 100 or 200 Amp
• Metered & Unmetered Available
• Maximum Voltage: 240 V or 480 V,
1 Phase, 3W or 3 Phase, 4W
• Higher AIC Available: 22K, 42K
• Powdercoat Colors Available
• Optional Time Clock, Lighting &
Contact Block

CSP-B Model Numbers & Service Options
Model No.

Amps

Voltage

AIC Rating

Main

CSP-B188-10K*

100A

120/240

10,000

(2x) 100A

CSP-B108-10K*

100A

120/240

10,000

100A

CSP-B116-10K*

100A

120/240

10,000

100A

CSP-B208-10K*

200A

120/240

10,000

200A

CSP-B216-10K*

200A

120/240

10,000

200A

CSP-B116-42K*

100A

120/240

42,000

100A

* Series AIC Ratings Available: 10K, 22K, 42K, 65K #4 at end of part number signifies
brushed stainless finish

COMMERCIAL SERVICE PEDESTAL
STAINLESS STEEL
CSP-B SERIES METERED ENCLOSURE

Designed to supply metered power to remote locations. Typical applications include street lighting, traffic signal circuits, parking lot lighting,
highway and pump stations and cellular applications.

16.5”

16”

HINGED DEMAND RESET
COVER WITH 3/16” LEXAN
VIEWING WINDOW
TEST BYPASS
BLOCKS

LANDING LUGS AND
FACTORY INSTALLED
CONDUCTORS

48”

12 POSITION
LOAD CENTER(S)

17” MIN.
16.5”

LOAD CONDUITS

16”

HINGED DEMAND RESET
COVER WITH 3/16” LEXAN
VIEWING WINDOW

SERVICE CONDUIT
3” MAXIMUM SIZE
2”

TEST BYPASS
BLOCKS

FINISHED GRADE

LANDING LUGS AND
FACTORY INSTALLED
CONDUCTORS

CONCRETE

12 POSITION FOUNDATION
LOAD CENTER(S)

24”

GALV. ANCHOR BOLTS
5/8” X 18” X 4”
WITH 90 DEGREE BEND
(4 REQUIRED)

17” MIN.

LOAD CONDUITS

SIDE VIEW

SERVICE CONDUIT
3” MAXIMUM SIZE

2”

FRONT VIEW

FINISHED GRADE

TEST
BLOCKS

14.5”

MAIN
BRKR

SIDE VIEW

METER SPECIFICATIONS

GALV. ANCHOR BOLTS
5/8” X 18” X 4”
WITH 90 DEGREE BEND
(4 REQUIRED)

16”

GRD

• 0-200 Amp Load Center with up
to 32 Circuits
N L1 L2
120V/240V
• 120V & 240V
Available
1PH 3 Models
WIRE
SERVICE
WIRING SCHEMATIC
• Test Blocks
• UL Listed, NEMA TYPE 3R Rated
• EUSERC 308 Compliant
Commercial Meter Pedestal
• Small Cabinet Profile with Side
Swinging Doors
• 16” W x 48” H x 16” D Cabinet
• 5 Year Limited Warranty

CONCRETE
FOUNDATION

24”

S/N
4-JAW
METER

FRONT VIEW

LINE

16.25”
12.25”
4-JAW
METER

TEST
BLOCKS

RECOMMENDED
GROUND ROD
LOCATION

S/N

16”

GRD

14.5”

CSP
- BASE FOR SERVICE
MAIN
BRKR
EQUIPMENT
ENCLOSURE

LINE
16.25”
12.25”

120V/240V
1PH 3 WIRE
SERVICE

48”

WIRING SCHEMATIC

CSP - BASE FOR SERVICE
EQUIPMENT ENCLOSURE

RECOMMENDED
GROUND ROD
LOCATION

COMMERCIAL SERVICE DUAL PEDESTAL
STAINLESS STEEL
COMMERCIAL SERVICE PEDESTAL
• Provides separate billing of metered power distribution for street lighting, parking lot lighting, traffic
signal circuits, private development lighting, signage, irrigation, pump stations, and cellular applications
• Caltrans Type III-CF
• 100% stainless steel welded construction provides ultimate protection against corrosion and vandalism
• Lift-up top provides easy access to meter
• All stainless steel construction
• Weather and vandal resistant
• Metered and unmetered available

FEATURES

SPECIFICATIONS

• Standard Voltage 120/240 V,
1 Phase 3W
• Meter Sockets: 4 Jaw, 100 Amp
• Main Breakers: 100 Amp, 10K AIC
• Meter Sockets with Test Blocks
• Utility Landing Lugs: 200 or 400 Amp
• Flip Top Meter Door
• 6-20 Circuit Copper Bussed or Lug
Style Busses Available (Per Meter)
• Access Panels Designed for
Padlock & Utility Seal
• Template with Anchor Bolts
• 5 Year Limited Warranty

• Caltrans Type III-CF
Compliant
• 16 Gauge Stainless Steel
Welded Construction
• Vandal Resistant Enclosure
• Listed by Underwriters
Laboratories
• Complies with EUSERC 308
• Rainproof Type 3R Rated
• UL 508A Panel Shop
SPECIFICATION ON PAGE 63

OPTIONS

CSP-C Model Numbers & Service Options
Model No.

Amps

Voltage

AIC Rating

Main

CSP-C188-10K*

100A

120/240

10,000

(2x) 100A

CSP-C120-10K*

100A

120/240

10,000

100A

CSP-C116-10K*

100A

120/240

10,000

100A

CSP-C208-10K*

200A

120/240

10,000

200A

CSP-C216-10K*

200A

120/240

10,000

200A

CSP-C288-42K*

200A

120/240

42,000

200A

* Series AIC Ratings Availacle: 10K, 22K, 42K, 65K
#4 at end of part number signifies brushed stainless finish

COMMERCIAL SERVICE DUAL PEDESTAL
STAINLESS STEEL
CSP-C SERIES METERED ENCLOSURE

Designed to supply metered power to remote locations. Typical
applications include street lighting, traffic signal circuits, parking
lot lighting, highway and pump stations and cellular applications.

METER COVER

26”

HINGED READING COVER 3/16”
POLYCARBONATE UV RESISTANT
WINDOWS

METER SOCKETS

LIFTING
HANDLE

TEST BLOCKS
PADLOCK HASP

RECESSED
SERVICE DOOR

CONTINUOUS
PIANO HINGE
PEU
WINDOW

LANDING LUGS AND
FACTORY INSTALLED
CONDUCTORS

48”

RECESSED
PADLOCKABLE
T HANDLE
DEADFRONT
PANEL

17” MIN

LOAD CONDUITS

2”
FINISHED GRADE

CONCRETE
FOUNDATION

24”
SERVICE
CONDUIT
3” MAX

GALV. ANCHOR BOLTS
5/8” X 18” X 4”
WITH 90 DEGREE BEND
(4 REQUIRED)

SIDE VIEW

FRONT VIEW

22.25”

METER SPECIFICATIONS
• 0-200 Amp Load Center with up to
20 Circuits Per Meter
• 120V, 240V & 480V Models
Available
• Test Blocks
• UL Listed, NEMA TYPE 3R Rated
• EUSERC 308 Compliant
Commercial Meter Pedestal
• Flip Top Meter Door
• 25” W x 48” H x 16.5” D Cabinet
• 5 Year Limited Warranty

6” MIN.

LINE

RECOMMENDED
GROUND ROD
LOCATION

LOAD

CSP C-SERIES - BASE FOR SERVICE
EQUIPMENT ENCLOSURE

12.25”

COMMERCIAL SERVICE DUAL PEDESTAL
STAINLESS STEEL
COMBINED COMMERCIAL METER SOCKET
WITH THE ULTIMATE ENCLOSURE
•
•
•
•

Compact, double door, front and back design, provides viewing and programming convenience
100% stainless steel construction assures long-term, rust-proof durability and additional strength
Chameleon effect of the natural brushed stainless steel finish provides an unobtrusive quality
All stainless steel enclosures may be powder coated in many colors at an additional charge

METER SECTION
• UL listed, E.U.S.E.R.C. 309 approved commercial meter socket, 100 amp rated, with test block
bypass provision
• Hinged viewing window provides convenient access for metering agency
• 100 amp load center
• 120v and 240v models available

ENCLOSURE SECTION

• Removable, predrilled backboard provides for easy installation and an attractive finished product
• Large door-mounted storage area and literature storage pocket provides easy access to plans
and scheduling information
• Filtered side louvers at bottom and top allow cross flow ventilation
• Mounting template and anchors included
• Ten year limited warranty

SB-24SS/120V
Metered Enclosure
120 Volt
•
•
•
•
•
•
•
•

24” Wide, 48” High, 29” Deep
120 Volt Meter Socket
Test Blocks
8 Position Load Center
Double Door Design
12” Deep Storage on Back Side
100% Stainless Steel
Weather & Vandal Resistant

SB-24SS/240V
Metered Enclosure
240 Volt
•
•
•
•
•
•
•
32

24” Wide, 48” High, 29” Deep
240 Volt Meter Socket
Test Blocks
8 Position Load Center
Double Door Design
12” Deep Storage on Back Side
100% Stainless Steel

• Three-Point Locking System
• Removable, Predrilled
Backboard
• Large Door-Mounted Storage &
Literature Pocket
• Louvered For Ventilation
• Mounting Template & Anchors
• UL Listed
• NEMA TYPE 3R Rated
SPECIFICATION ON PAGE 58

•
•
•
•
•
•
•
•

Weather & Vandal Resistant
Three-Point Locking System
Removable, Predrilled Backboard
Large Door-Mounted Storage & Literature
Pocket
Louvered For Ventilation
Mounting Template & Anchors
UL Listed
NEMA TYPE 3R Rated

SPECIFICATION ON PAGE 58

BBS TRAFFIC ENCLOSURES
STAINLESS STEEL
BBS SERIES BATTERY BACKUP

The StrongBox Battery Backup System Traffic Enclosure is used to conceal batteries for traffic signals.
These cabinets may be mounted to or with the StrongBox MPS Series meter pedestals or used as a stand
alone pedestal. Our enclosures come with passive ventilation or fan with thermostat, louvers with dust filters, rain channel, gasket and a three point compression locking door.
Removable shelves give access to the battery compartments for wiring. The StrongBox BBS enclosure
comes configured to accept most Battery Backup Systems for shelf mounted traffic applications.

SPECIFICATIONS
• Material: 14 ga. 304 stainless steel welded construction
• Certification: NEMA TYPE 3R
• Cooling: Optional thermostatically controlled fan,
louvered door
• Security: Three point lock with padlock provision

FEATURES
• Designed to attach to MPS series pedestal or stand
alone
• Removable shelves for ease of wiring
• 3 point compression latch door
• Stainless piano hinge on entry door
• Integrated rain channel around entry door

BBS-185212

• 18” Wide, 52” High, 12” Deep

QUICKPAD™ ENCLOSURE MOUNTING PAD
for strong box® enclosures
Our new QuickPad™ mounting pad with support base
makes installation and mounting of Strong Box®
enclosures easier than ever. No concrete is needed.
The mounting pad has our unique fastening system
that allows for easy, secure attachment of the pad to
the support base and the enclosure to the pad.
Together, the heavy-duty pad, support base and a
Strong Box® enclosure form a complete unit that is
secure, stable and vandal resistant.
The buried support base provides added stability and
security for the entire assembly.
All mounting hardware is stainless steel to prevent
corrosion and rust.
Patent No 6,321,928.

QuickPad for Strong Box® Controller Enclosures

DIMENSIONS
A
B

QP-16

QuickPad for SB-16

28.5" Wide, 18.5" Deep

QP-18

QuickPad for SB-18

28.5" Wide, 18.5" Deep

QP-18D

QuickPad for SB-18D

28.5" Wide, 28.5" Deep

QP-22

QuickPad for SB-22

28.5" Wide, 28.5" Deep

QP-24

QuickPad for SB-24

28.5" Wide, 18.5" Deep

QP-24D

QuickPad for SB-24D

28.5" Wide, 28.5" Deep

QP-M

QuickPad for Metered Enclosure

28.5" Wide, 28.5" Deep

QP-LD16

QuickPad for Light Duty Cabinets LD-16

28.5" Wide, 18.5" Deep

QP-CSP

QuickPad for CSP-Meters

28.5" Wide, 18.5" Deep

QP-MPE

QuickPad for MPE-Meters

32" Wide, 25" Deep

QP-MPS

QuickPad for MPS-Meters

32" Wide, 25" Deep

QuickPad for Strong Box® Backflow Enclosures

QP-22BF

QuickPad for SBBC-22 Series

28.5” Wide, 19” Deep

QP-20BF

QuickPad for SBBC-20 Series

32" Wide, 19" Deep

QP-30BF

QuickPad for SBBC-30 Series

32" Wide, 19" Deep

QP-45BF

QuickPad for SBBC-45 Series

49” Wide, 19” Deep

SPECIFICATION ON PAGE 40

DIMENSIONS
A
B

ENCLOSURE
OPTIONS
36 & 52 STATION CONTROLLER
SUBASSEMBLY

This package includes 120 volt, 15 amp, ground fault protected
duplex box with receptacle and locking switch: flexible conduit and
condulet; and terminal strips with placards.
CSA
36 Stations
CSA-52 52 Stations

THERMOSTATICALLY CONTROLLED FAN

The fan is easily installed and can be adjusted in the field to help
maintain desired enclosure temperature.
OPT-FAN

OPT-FAN8-120PE
OPT-FAN8-230PE

120V Version
230V Version

SOLAR SYNC COVER

Solar Sync Cover is designed to protect Solar Sync switches from
vandalism and made to attach to StrongBox enclosures with gasket
seal.
SRSE

ENCLOSURE
OPTIONS
RAIN SWITCH ENCLOSURE

The Rain Switch Enclosure is designed to protect WCS and MiniClick Rain Switches from vandalism.
RGVRSS

POLE MOUNT RAIN SWITCH ENCLOSURE
Mounts to 2” galvanized pipe.
RGVRSS-P

StrongBoxTM manufactures high quality irrigation, plumbing
and electrical landscape enclosures for every application. We
also offer an extensive line of meter pedestals, tree tying and
sprinkler support products for the landscape professional.
• Heavy duty stainless steel for durability
• Weather and vandal resistant
• Prompt product availability
• Excellent sales and technical support
Call or visit our website to specify VIT products for your
next project.

VIT Products, Inc.
Makers of the original StrongBox®

www.vitproducts.com

1.800.729.1314

TREE & SPRINKLER SUPPORT
AND PROTECTION PRODUCTS
Cinch-Tie Tree Supports
UV resistant Flexible Vinyl
CT24 24” Long. For Staking of a 5-15 Gallon Tree
CT32 32” Long. For Staking of a 24” Box Tree
Sold in Bundles of 100

Cinch-Belt Tree Support
UV resistant Flexible Vinyl
CB250 250’ Roll For Staking Trees.
Comes with 70 Buckles Per Roll—Extra Buckles Are Available

Twist-Brace Tree Supports
Nail Bracket Style
5/16” round metal rod with a 4 1/2” loop
encased in UV resistant vinyl tubing
TB24

24” long, for staking 5-15 gallon to 24” box trees

Twist-Brace Tree Supports
Bolt Style
1/2” round metal rod with a 4 1/2” loop encased
in UV resistant vinyl tubing
TB36

36” long, for staking 24“-36” box trees

Hose & Wire Tree Supports
12 Gauge galvanized wire encased in 10 1/2”
long UV resistant vinyl tubing
HW27 27” long, for staking 5-15 gallon trees
HW36 36” long, for staking 24” box trees
Sold in Bundles of 100

12 Gauge galvanized wire encased in 16” long
UV resistant vinyl tubing
HW3616 36” long, for staking 24” box trees
HW4816 48” long, for staking 24” box trees
Sold in Bundles of 100

TREE & SPRINKLER SUPPORT
AND PROTECTION PRODUCTS
Trim Guard Tree Trunk Protection
TG4

Protects trees from tree trimmer damage

Pipe Stabilizer
Use between the sprinkler heads to control movement of the pipe
PS12 12” Pipe Stabilizer
PS18 18” Pipe Stabilizer
PS24 24” Pipe Stabilizer
Sold in Bundles of 5

Sprinkler Stabilizer
Use to secure pipe and sprinkler heads to prevent movement,
vandalism and damage
SS18 18” Sprinkler Stabilizer
SS24 24” Sprinkler Stabilizer
Sold in Bundles of 5

STRAIGHT RISER Stabilizer
Use to secure risers to prevent movement, vandalism and damage.
The steel shaft gives additional support and allows good penetration
even in tough soils.
RS12 12” Straight Riser Stabilizer
RS18 18” Straight Riser Stabilizer
RS24 24” Straight Riser Stabilizer

Sprinkler Tie
Use to secure the sprinkler to the Sprinkler Stabilizer
ST9
9” Sprinkler Tie for shrubs
ST12 12” Sprinkler Tie for Pop-ups
Sold in Packs of 50

Ratchet Tool for Sprinkler Ties
RT

Use to install Sprinkler Ties

QUICKPAD
ENCLOSURE MOUNTING PAD

QP Series
Installation Details

Controller Enclosure

Fill inside base with pea gravel

Optional Pedestal

QuickPad fastening bracket (2)

QuickPad– 3/16” min. thickness aluminum
powder coated preformed pad

10. 120 volt service conduit

4.
5.

Direct burial control wires to control valves
PVC long sweep ells

Finish grade 2” below top of QuickPad

QuickPad support base

11. Controller sub-assembly (CSA)
includes terminal strips with placards
12. Automatic controller

Specifications
The controller enclosure mounting pad assembly shall consist of
a reinforced plastic support
base, a three sixteenth inch thick
5052 H32 Marine Grade
Aluminum mounting pad and
stainless steel fastening brackets. The support base shall be

installed and compacted in earth
allowing the top two inches of the
support base to be exposed
above the earth. The 5052 H32
Marine Grade Aluminum mounting pad shall be clamped to the
support base with the stainless
steel fastening brackets. The

controller enclosure shall be bolted from the inside of the enclosure to the mounting pad, thus
preventing outside access to the
mounting bolts.

*QuickPads used for all Strong Box
enclosures.

40 40

STAINLESS STEEL
ENCLOSURE

Front Entry Enclosure
Models: SB-18SS, SB-18DSS, SB-24SS,
SB-24DSS, SB36SS

INSTALLATION DETAILS

12”

24”

36”

12”

4”

Double Door Side View

Single Door Side View

1. Controller enclosure
2. Optional pedestal
3. Poured concrete base—6" min. thickness—
extend concrete 6" beyond outside dimensions
of enclosure with 1/2% slope for drainage
4. PVC long sweep ell—size as required

5. Direct burial control wires to control valves
6. Finish grade
7. Controller sub-assembly (CSA) includes GFI
& terminal strips with placards
8. Automatic controller
9. 120 volt service in conduit

SPECIFICATIONS
The enclosure shall be of a vandal
and weather resistant nature manufactured entirely of stainless
steel. The main housing shall be
louvered upper and lower body
to allow for cross flow ventilation.
Filter screens shall cover all louvers to deflect against water
spray, insects and dust. A stainless steel backboard shall be
provided for the purpose of
mounting electronic and various
other types of equipment. The
backboard shall be mounted on
four stainless steel bolts that will

allow for removal of the backboard. The inside door area shall
provide adequate storage for
plans, operating instructions, and
scheduling information. The
enclosure door shall have a continuous stainless steel piano
hinge, carriage bolted on one
side, and a three point locking
mechanism on the other side.
The edge of the door shall be
hemmed to eliminate any sharp
edges. The handle controlling the
locking mechanism shall be
located at the base of the door

and be concealed within the surface of the door. A stainless steel
cam style lock shall be mounted
in the door and a provision for a
padlock shall be included within
the locking mechanism. The
enclosure shall be manufactured
with a continuous drainage channel which mates with a teardrop
shaped, hollow center, water-tight,
thermoplastic door seal. The
above described product shall
be a NEMA TYPE 3R Rainproof
Enclosure as listed by
Underwriter Laboratories, Inc.

Telephone (800) 729-1314 ■ FAX (888) 310-3946 ■ www.vitproducts.com

STAINLESS STEEL
ENCLOSURE

Top Entry Enclosure
Models: SB-16SS, SB-22SS

INSTALLATION DETAILS

1. Controller enclosure
2. 120 volt service in conduit
3. Poured concrete base—6" min. thickness—
extend concrete 6" beyond outside dimen
sions of enclosure with 1/2% slope for drainage
4. QuickPad mounting base

5. Direct burial control wires to control valves
6. Finish grade
7. Controller sub-assembly (CSA) includes GFI
& terminal strips with placards
8. Automatic controller

Specifications
The enclosure shall be of a vandal and weather resistant nature
manufactured entirely of stainless
steel. The main housing door
shall be louvered at the bottom
and equipped with a tear drop
shaped, hollow center thermoplastic door seal. The entry lid
shall be louvered on the back
side to allow for cross flow ventilation. Filter screens shall cover
all louvers to deflect against
water spray, insects and dust.
The top entry lid shall be assisted by two gas springs for easy

access. The edge of the lid shall
be hemmed to eliminate any
sharp edges. The top entry lid
shall have a continuous stainless
steel piano hinge, carriage bolted on the rear, and a three point
locking mechanism on the front.
A stainless steel cam style lock
shall be mounted in the lid and a
provision for a padlock shall be
included within the locking mechanism. A removable stainless
steel tray shall be provided for
the purpose of mounting electronics and various other types of
equipment. A removable stain-

less steel backboard shall be
provided in the lower body and
mounted on four stainless steel
bolts. The inside door area shall
provide adequate storage for
plans, operating instructions, and
scheduling information. The
above described product shall
be a NEMA TYPE 3R Rainproof
Enclosure as listed by
Underwriter Laboratories, Inc.

STAINLESS STEEL
ENCLOSURE

Wall Mount Enclosure
INSTALLATION DETAILS

1.
2.
3.
4.
5.

Controller enclosure
Wall
Automatic controller
24 volt conduit
120 volt conduit

Models: SB-16SSW, SB-18SSW,
SB-24SSW, SB-36SSW

NOTE: Install controller enclosure to wall as per
manufacturer's installation instructions

Specifications
The enclosure shall be of a vandal and weather resistant nature
manufactured entirely of stainless
steel. The main housing shall be
louvered upper and lower body
to allow for cross flow ventilation.
Filter screens shall cover all louvers to deflect against water
spray, insects and dust. A stainless steel backboard shall be
provided for the purpose of
mounting electronic and various
other types of equipment. The
backboard shall be mounted on
four stainless steel bolts that will
allow for removal of the back-

board. The inside door area shall
provide adequate storage for
plans, operating instructions and
scheduling information. The
enclosure door shall have a continuous stainless steel piano
hinge, carriage bolted on one
side, and a two-point locking
mechanism on the other side.
The edge of the door shall be
hemmed to eliminate any sharp
edges. The handle controlling the
locking mechanism shall be
located at the base of the door
and be concealed within the surface of the door. A stainless steel

cam style lock shall be mounted
in the door and the provision for
a padlock shall be included within the locking mechanism. The
enclosure shall be manufactured
with a continuous drainage channel which mates with a tear-drop
shaped, hollow center, watertight, thermoplastic door seal.
The above described product
shall be a NEMA TYPE 3R
Rainproof Enclosure as listed by
Underwriter Laboratories, Inc.

STAINLESS STEEL
CABINET

Light Duty Cabinet
Model: LD-16S

Installation Details

1. Controller cabinet
2. Poured concrete base – 6"Min. thickness – extend 6"
beyond outside dimensions of enclosure with 1/2%
slope for drainage
3. PVC long sweep ell – use one sweep ell per
controller

4. Ground rod
5. Finish grade
6. Controller sub-assembly (CSA) includes GFI
and terminal strips with placards
7. Automatic controller
8. 120-volt service in conduit

Specifications
The cabinet shall be of a weather
resistant nature manufactured
entirely of stainless steel. The
main housing shall be louvered
upper and lower body to allow
for cross flow ventilation. Filter
screens shall cover all louvers to
deflect against water spray,
insects and dust. A stainless
steel backboard shall be provid-

ed for the purpose of mounting
electronic and various other
types of equipment. The backboard shall be mounted on four
stainless steel bolts that will allow
for remΩoval of the backboard. A
stainless steel cam style lock
shall be mounted in the door. The
cabinet shall be equipped with a
teardrop shaped, hollow center,

watertight, thermoplastic door
seal. The above described product shall be a NEMA TYPE 3R
Rainproof Enclosure as listed by
Underwriter Laboratories, Inc.

STAINLESS STEEL
CABINET

Light Duty Cabinet
Model: LD-16SW

Installation Details

1.
2.
3.
4.
5.

Controller cabinet
Wall
Automatic controller
24-volt conduit
120-volt conduit

Note:
Install controller cabinet to a wall as per
manufacturer’s installation instructions.

Specifications
The cabinet shall be of a weather
resistant nature manufactured
entirely of stainless steel. The
main housing shall be louvered
to deflect against water spray,
insects and dust. A stainless
steel backboard shall be provided for the purpose of mounting
electronic and various other
types of equipment. The backboard shall be mounted on four

stainless steel bolts that will allow
for removal of the backboard.
The cabinet door shall have a
continuous stainless steel piano
hinge on one side with a stainless steel cam style lock mounted in the door. The cabinet shall
be equipped with a teardrop,
hollow center, watertight, thermoplastic door seal. The bottom of
the cabinet shall be prepunched

for electrical conduit. The above
described product shall be a
NEMA TYPE 3R Rainproof
Enclosure as listed by
Underwriter Laboratories, Inc.

STAINLESS STEEL
CABINET

Light Duty Cabinet
Model: LD-18SW

Installation Details

1.
2.
3.
4.
5.

Controller cabinet
Wall
Automatic controller
24-volt conduit
120-volt conduit

Note:
Install controller cabinet to a wall as per
manufacturer’s installation instructions.

Specifications
The cabinet shall be of a weather
resistant nature manufactured
entirely of stainless steel. A stainless steel backboard shall be
provided for the purpose of
mounting electronic and various
types of equipment. The backboard shall be mounted on four
stainless steel bolts that will allow
for removal of the backboard.
The cabinet door shall have a

continuous stainless steel piano
hinge on one side with a stainless steel cam style lock mounted in the door. The cabinet shall
be manufactured with a continuous drainage channel which
mates with a teardrop shaped,
hollow center, watertight, thermoplastic door seal. The bottom of
the cabinet shall be prepunched
for electrical conduit. The above

described product shall be a
NEMA TYPE 3R Rainproof
Enclosure as listed by
Underwriter Laboratories, Inc.

aluminum alloy
pump enclosure

Models PE-40AL
& PE-60AL

INSTALLATION DETAILS

1.
2.
3.
4.

Aluminum pump enclosure
Pump/Filter/Controls+
Anchor Rake brace
Poured concrete base—6" min.
thickness—extended 4" beyond
outside dimensions of enclosure

5.
6.
7.
8.

Water service inlet piping
Water service outlet piping
Finish grade
Enclosure Foot

Specifications
The pump enclosure shall be of a
vandal and weather resistant
nature manufactured entirely of
marine grade aluminum alloy
5052-H32, with a wall thickness
of one eighth inch. The mounting
base shall be manufactured
entirely of stainless steel. The
main housing shall be of solid
sheet construction punched on
the ends with louvers for ventilation. The enclosure shall be a
center split design, having
mounting lips on each end. The
mounting base shall be submerged into the concrete a mini-

mum of two inches, positioning
the enclosure two and one half
inches above the concrete for
drainage purposes. The locking
mechanism shall be of the full
release type which allows for
complete removal of the enclosure from its mounting base without the use of tools. The locking
mechanism shall be a Stainless
Steel Cross Bar style and provide
for a padlock.

ALUMINUM
ENCLOSURE

Backflow Enclosure
Models: SBBC–22AL, SBBC–30AL,
SBBC–45AL

Installation Details

Aluminum Backflow Enclosure

Backflow Preventer

Framed Mounting Base – powder coated polymer with
anchors inset for enclosure and anchor bolts for concrete

Poured Concrete Base – 6” minimum thickness –
extend 4” beyond outside dimensions of enclosure

Water Service Inlet Piping

Water Service Outlet Piping

Finish Grade

Specifications
The backflow enclosure shall be
of a vandal resistant nature manufactured entirely of marine
grade aluminum alloy 5052-H32,
with a wall thickness of one
eighth inch. The mounting base
plate shall be manufactured of
stainless steel and powder coated. The main housing shall be of
solid sheet construction with
stainless carriage bolts used for
assembling enclosure sides top

and ends. The enclosure shall
have a drop down door with
stainless hardware hidden
beneath door frame. The enclosure body shall lift open, pivoting
from the back edge mounted to
base also with hidden stainless
hardware. Enclosure shall stay
secured to mounting base plate
in open and closed positions.
Mounting Base shall have concrete anchor bolts to submerge

into concrete leaving mounting
base flush on concrete surface.
The enclosure door shall have a
recessed handle and provide a
concealed hasp for a padlock.

ALUMINUM
ENCLOSURE

Backflow Enclosure
Installation Details

Models: SBBC–40ALHP, SBBC–40WALHP,
SBBC–60ALHP, SBBC–75ALHP,
SBBC–90ALHP

Aluminum Backflow Enclosure

Backflow Preventer

Anchor Rake Brace

Poured Concrete Base – 6” minimum thickness –
extend 4” beyond outside dimensions of enclosure

Water Service Inlet Piping

Water Service Outlet Piping

Finish Grade

Enclosure Foot

Specifications
The backflow enclosure shall be
of a vandal and weather resistant
nature manufactured entirely of
marine grade aluminum alloy
5052-H32, with a wall thickness
of one eighth inch. The mounting
base shall be manufactured
entirely of stainless steel. The
main housing shall be of solid
sheet construction punched on
the sides with a rectangular pat-

tern for viewing backflow operation. The enclosure shall be a
center split design, having
mounting lips on each end. The
mounting base shall be submerged into the concrete a minimum of two inches, positioning
the enclosure one and one half
inches above the concrete for
drainage purposes. The locking
mechanism shall be of the full

release type which allows for
complete removal of the enclosure from its mounting base without the use of tools. The locking
mechanism shall be a Stainless
Steel Cross Bar style and provide
for a padlock.

INSULATED ALUMINUM
ENCLOSURE

Backflow Enclosure
Models: SBBC–22ALI, SBBC–30ALI,
SBBC–45ALI

Installation Details

Aluminum Backflow Enclosure

Backflow Preventer

Framed Mounting Base – powder coated polymer with
anchors inset for enclosure and anchor bolts for concrete

Poured Concrete Base – 6” minimum thickness –
extend 4” beyond outside dimensions of enclosure

Water Service Inlet Piping

Water Service Outlet Piping

Finish Grade

Specifications
The backflow enclosure shall be
of a vandal resistant nature
manufactured entirely of marine
grade aluminum alloy 5052-H32,
with a wall thickness of one
eighth inch. The mounting base
plate shall be manufactured of
stainless steel and powder coated. The main housing shall be of
solid sheet construction with
stainless carriage bolts used for
assembling enclosure sides top
and ends. The enclosure shall
have a drop down door with
stainless hardware hidden

beneath door frame. The enclosure body shall lift open, pivoting
from the back edge mounted to
base also with hidden stainless
hardware. Enclosure shall stay
secured to mounting base plate
in open and closed positions.
Mounting Base shall have concrete anchor bolts to submerge
into concrete leaving mounting
base flush on concrete surface.
The enclosure door shall have a
recessed handle and provide a
concealed hasp for a padlock.
Insulated Polar Beariers shall be

used to protect backflow devices
from freezing temperatures inside
Strongbox Insulated Aluminum
Enclosures. Polar Beariers protect to a R19 insulation rating
using Radiant Barrier Foil (RBF)
inserted between acrylic polyester and air bubble pack. These
layers forming an insulated bag
shall be impervious to moisture.

INSULATED ALUMINUM
ENCLOSURE

Installation Details

High Profile
Backflow Enclosure

Models: SBBC–40ALHPI, SBBC–40WALHPI,
SBBC–60ALHPI, SBBC–75ALHPI, SBBC–90ALHPI

Aluminum Backflow Enclosure

Water Service Inlet Piping

Backflow Preventer

Water Service Outlet Piping

Anchor Rake Brace

Finish Grade

Poured Concrete Base – 6” minimum thickness –
extend 4” beyond outside dimensions of enclosure

Enclosure Foot

a loop to provide dead air space
shall be installed along the bottom. The enclosure shall be a
center split design, having
mounting lips on each end. The
mounting base shall be submerged into the concrete a minimum of two inches, positioning
the enclosure one and one half
inches above the concrete for
drainage purposes. The locking
mechanism shall be of the full

release type which allows for
complete removal of the enclosure from its mounting base without the use of tools.The locking
mechanism shall be a Stainless
Steel Cross Bar style and provide
for a padlock.

STAINLESS STEEL
ENCLOSURE

Backflow Cover
Models: SBBC–22SS, SBBC–30SS,
SBBC–45SS

Installation Details

Smooth Touch Backflow Cover

Backflow Preventer

Anchor Base Mount

Poured Concrete Base – 6” minimum thickness –
extend 4” beyond outside dimensions of enclosure

Enclosure Locking Swing Door (door mounted to
anchor base)

Padlock Protective Cover

Enclosure Swivel Point – attached to mounting
base. Enclosure secured to base (6 places)

Enclosure Mounting Base Studs. 3/8” x 3/4”

Specifications
The Backflow cage enclosure
shall be of a vandal resistant
nature manufactured of formed
stainless steel tubing and rod,
coated with a performance polymer alloy coating. Special powder coated colors available as
per specified by city. All locking
and mounting hardware shall be
manufactured entirely of stainless
steel. The frame of the enclosure
shall be constructed of one and
one quarter inch tubing as a minimum, including the drop down
door which inserts into the open
end of the frame. The top, sides
and end panels shall be con-

structed of rod forming a one
inch by two and a half inch rectangular pattern as a maximum
opening. The vertical rods shall
be a minimum of three sixteenths
inch thick and the horizontal rods
shall be a minimum of one
eighth. These rods shall be welded together forming grids. These
grids shall be welded into the
tube frames half inch welds not
more than four inches apart. The
enclosure door and enclosure
shall be cleaned and coated
with not less than three mils
powder coat.

Each enclosure shall have a
mounting pad which shall be
used as installation frame.
Enclosure hardware on the
mounting frame shall be stainless
steel. Mounting frame shall be
installed using four each, 3/8” “L”
anchor bolts submerged in concrete a minimum two inches. The
backflow cage enclosure shall
remain bolted to frame in open
and closed positions. Enclosure
and door shall close with concealed locking tab with seven sixteenths hole to accept padlock.

STAINLESS STEEL
ENCLOSURE

Backflow Cover
Models: SBBC–20SS, SBBC–40SS,
SBBC–75SS

Installation Details

SBBC-20SS
1.
2.
3.
4.

SBBC-40SS, SBBC-75SS

5.
6.
7.

Smooth Touch Backflow Cover
Backflow Preventer
Anchor Plates (typical)
Poured Concrete Base – 6” minimum
thickness – extend 4” beyond outside
dimensions of enclosure
Water Service Inlet Piping
Water Service Outlet Piping
Finish Grade

Removable Locking End

1.
2.
3.
4.
5.
6.
7.
8.
9.

Smooth Touch Backflow Cover
Backflow Preventer
Secured Swivel Mounting Plates
Poured Concrete Base – 6” minimum thickness –
extend 4” beyond outside dimensions of enclosure
SBBC Mounting Base – fastened or anchor bolted
to concrete
Water Service Outlet Piping
Water Service Inlet Piping
Padlock Locking Hasp
Finish Grade

Specifications
The backflow enclosure shall be
of a vandal resistant nature manufactured of formed stainless
steel tubing and rod to prevent
handling injury. The locking
mechanism and mounting hardware shall be manufactured
entirely of stainless steel. The
frame of the enclosure shall be
constructed of one and one
quarter inch tubing. The top
sides, and end panels shall be

constructed of rod welded
together forming a one by two
inch rectangular pattern. The vertical rod shall be three sixteenths
and horizontal rod shall be one
eighth inch thick. The SBBC20SS shall have inner door on
one end to provide entry with
covered padlock at top of door
for security. The SBBC-40SS and
SBBC-75SS shall be clam shell
design with padlock hasp on to

where two pieces join in the
closed position. Enclosure ends
shall have a mounting lip on each
side which attaches to mounting
which is submerged into concrete. Enclosure shall be positioned one and one half inches
above concrete to allow for drainage. Vandal proof brackets shall
be installed during installation.

POWDER COATED
ENCLOSURE

Backflow Cover
Models: SBBC–22CR, SBBC–30CR,
SBBC–45CR

Installation Details

Smooth Touch Backflow Cover

Backflow Preventer

Anchor Base Mount

Poured Concrete Base – 6” minimum thickness –
extend 4” beyond outside dimensions of enclosure

Enclosure Locking Swing Door (door mounted to
anchor base)

Padlock Protective Cover

Enclosure Swivel Point – attached to mounting
base. Enclosure secured to base (6 places)

Enclosure Mounting Base Studes 3/8” x 3/4”

Finish Grade

10. Water Service Inlet Piping

Specifications
The Backflow cage enclosure
shall be of a vandal resistant
nature manufactured of formed
cold rolled steel tubing and rod,
coated with a performance polymer alloy coating. Special powder coated colors available as
per specified by city. All locking
and mounting hardware shall be
manufactured entirely of stainless
steel. The frame of the enclosure
shall be constructed of one and
one quarter inch tubing as a minimum, including the drop down
door which inserts into the open
end of the frame. The top, sides
and end panels shall be constructed of rod forming a one
54

inch by two and a half inch rectangular pattern as a maximum
opening. The vertical rods shall
be a minimum of three sixteenths
inch thick and the horizontal
rods shall be a minimum of one
eighth. These rods shall be welded together forming grids. These
grids shall be welded into the
tube frames half inch welds not
more than four inches apart.
The enclosure door and enclosure shall be cleaned and coated
with not less than three mils
powder coat.
Each enclosure shall have a
mounting pad which shall be

used as installation frame.
Enclosure hardware on the
mounting frame shall be
stainless steel. Mounting frame
shall be installed using four
each, 3/8” “L” anchor bolts submerged in concrete a minimum
two inches. The backflow cage
enclosure shall remain bolted to
frame in open and closed positions. Enclosure and door shall
close with concealed locking tab
with seven sixteenths hole to
accept padlock.

POWDER COATED
ENCLOSURE

Backflow Cover
Models: SBBC–40CR, SBBC–75CR

Installation Details

Smooth Touch Backflow Cover

Water Service Outlet Piping

Backflow Preventer

Water Service Inlet Piping

Secured Swivel Mounting Plates

Padlock Locking Hasp

Poured Concrete Base – 6” minimum thickness –
extend 4” beyond outside dimensions of enclosure

Finish Grade

SBBC Mounting Base – fastened or anchor bolted to
concrete

Note: Enclosure shall swivel outward to expose backflow. Backflow cover is secured to base and tools must
be used to remove completely.

Specifications
The backflow enclosure shall be
of a vandal resistant nature manufactured of formed cold rolled
steel tubing and rod to prevent
handling injury. The locking
mechanism and mounting hardware shall be manufactured
entirely of stainless steel. The
frame of the enclosure shall be
constructed of one and one
quarter inch tubing. The top
sides, and end panels shall be

constructed of rod welded
together forming a one by two
inch rectangular pattern. The vertical rod shall be three sixteenths
and horizontal rod shall be one
eighth inch thick. The SBBC40CR and SBBC-75CR shall be
clam shell design with padlock
hasp on to where two pieces join
in the closed position. Enclosure
ends shall have a mounting lip
on each side which attaches to

mounting which is submerged
into concrete. Enclosure shall
be positioned one and one half
inches above concrete to allow
for drainage. Vandal proof
brackets shall be installed
during installation. The cover
shall be covered with a zinc base
powder coat then powder coated
with a polyester TGIC coating
having a minimum thickness
of 2.5 mils.

EXPANDED METAL
BACKFLOW COVER

Backflow Cover
Models: BC–30CR, BC–45CR,

Installation Details

Expanded Metal Backflow Enclosure

Backflow Preventer

Anchor Bracket

Poured Concrete Base – 6” minimum thickness –
extend 4” beyond outside dimensions of enclosure

Water Service Inlet Pipe

Water Service Outlet Pipe

Finish Grade

Specifications
The backflow cover shall be of a
vandal resistant nature manufactured of formed and expanded
metal, coated with a performance polymer alloy coating to
prevent handling injury. The
cover shall have a hinge on one
end and a locking tab on the
other end. The hinge shall be
attached to mounting brackets
with carriage bolts to allow
removal of the cover from the

hinges. The mounting brackets
shall be submerged into the concrete a minimum of two inches,
positioning the cover one and
one half inches above the concrete. The locking tab shall
accept a padlock. Handles shall
be attached to the sides to facilitate raising and lowering of the
cover.
The cover shall be covered with
a zinc base powder coat then

powder coated with a polyester
TGIC coating having a minimum
thickness of 2.5 mils.

EXPANDED METAL
BACKFLOW COVER

High Profile
Backflow Cover

Installation Details

Models: BC–75CR

Expanded Metal Backflow Enclosure

Backflow Preventer

Anchor Bracket

Poured Concrete Base – 6” minimum thickness –
extend 4” beyond outside dimensions of enclosure

Water Service Inlet Pipe

Water Service Outlet Pipe

Finish Grade

Specifications
The backflow cover shall be of a
vandal resistant nature manufactured of formed and expanded
metal, coated with a performance polymer alloy coating to
prevent handling injury. The
cover shall be in two sections
with a hinge on each end and a
locking tab at the center. The
hinges shall be attached to
mounting brackets with carriage
bolts to allow removal of the

cover from the hinges. The
mounting brackets shall be submerged into the concrete a minimum of two inches, positioning
the cover one and one half inches above the concrete. The locking tab shall accept a padlock.
Handles shall be attached to the
sides to facilitate raising and
lowering of the cover.
The cover shall be covered with
a zinc base powder coat then

powder coated with a polyester
TGIC coating having a minimum
thickness of 2.5 mils.

STAINLESS STEEL
ENCLOSURE

Metered Enclosure
INSTALLATION DETAILS

1.
2.
3.
4.
5.

Models: SB-24SS/120V, SB-24SS/240V

Metered controller enclosure
Meter socket with test blocks
Load center
Conduit (not supplied) for line feed into meter
Poured concrete base—6" min. thickness—extend 6"
beyond outside dimensions of enclosure with 1/2% slope
for drainage

6. Finish grade
7. Direct burial control wires to control valves
8. PVC long sweep ell—use one sweep
ell per controller
9. Automatic controller

Specifications
The metered controller enclosure
shall be a double door design
positioned front and back, vandal
and weather resistant, manufactured entirely of stainless steel.
The front section shall house a
UL listed, E.U.S.E.R.C. approved
100 Amp rated commercial meter
socket with test block bypass
provision. The back section shall
be louvered upper and lower
body to allow for cross flow ventilation. Filter screens shall cover
all louvers to deflect against
water spray, insects and dust.
The back section shall have a

stainless steel backboard provided for the purpose of mounting a
controller. The backboard shall
be mounted on four stainless
steel bolts that will allow for
removal of the backboard. The
inside door area shall provide
adequate storage for plans,
operating instructions and
scheduling information. The
enclosure shall have continuous
stainless steel piano hinges on
one side of each door. The edge
of the door shall be hemmed to
eliminate any sharp edges. The
handles controlling the locking

mechanisms shall be located at
the base of the doors and be
concealed within the surface of
the doors. The provision for padlocks shall be included within the
locking mechanisms. The enclosure shall be manufactured with
a continuous drainage channel
which mates with a tear-drop
shaped, hollow center, watertight, thermoplastic door seal.
The above described product
shall be a NEMA TYPE 3R
Rainproof enclosure as listed by
Underwriter Laboratories, Inc.

STAINLESS STEEL
METER PEDESTAL

100 Amp
Installation Details

1.
2.
3.
4.
5.
6.
7.

Models: MPS-A16, MPS-B16, MPS-D18

StrongBox metered enclosure, stainless steel,
NEMA TYPE 3R—18” x 20” x 52” # MPS-XXX-XX
Hinged removable lid
Meter socket with test blocks
Load center
Landing lugs
Landing lug compartment
Load center compartment

Poured concrete base—6" min. thickness—
extend 6" beyond outside dimensions of
enclosure with 1/2% slope for drainage
9. Finish grade
10. Underground service
11. Meter viewing window 5” x 10”
12. 3/8” stainless anchor bolts

Specifications
The meter pedestal shall be made
entirely of stainless steel, #4
brushed finish, utilizing all welded
construction providing superior vandal and weather resistance.
The top shall be a side swing style
that locks out for safety. The side
swing top shall fully expose the
meter compartment for ease of setting the meter and access to the
test blocks. The top shall be supported by 3 large all stainless steel
hinges with 1/4” pins that are “lift
off” style allowing the top to be
completely removed. A replaceable
5” x 10”, 3/16” thick Lexan viewing
window shall be provided.
The meter socket test block compartment shall be equipped with a
watershed drainage channel and

overlapping equipment panels that
ensures a watertight design. Within
the top meter compartment the
meter socket test block assembly
shall be installed. The top shall be
completely padlockable and accept
a utility seal.
The utility compartment shall be
located on the right side and house
the landing lugs. A cover panel that
can accommodate a padlock and
utility seal shall be provided.
The left side of the pedestal shall
house the 20” x 30” customer electrical compartment. This compartment shall be outfitted with a fully
welded and hemmed stainless steel
gasketed door that closes against a
watershed drainage channel. The
door design and all stainless steel

T handle latching system shall
ensure water tightness and vandal
resistance.
The interior portion of this compartment shall house up to a 20 circuit
capable load center with a removable protective panel. A stainless
steel electrical backboard shall
be provided for ease of wiring
and grounding of electrical
components.
The pedestal assembly shall be a
single phase or three phase,
120V/240V or 480V rated unit.
The enclosure shall be rainproof
NEMA TYPE 3R and the assembly
shall be listed by Underwriter
Laboratories, Inc. for service
entrance equipment.

STAINLESS STEEL
METER PEDESTAL

200 Amp
Models: MPS-C20, MPS-E24

Installation Details

1. StrongBox metered enclosure, stainless steel,
NEMA TYPE 3R—18” x 20” x 52” # MPS-XXX-XX
2. Hinged removable lid
3. Meter socket with test blocks
4. Load center
5. Landing lugs
6. Landing lug compartment
7. Load center compartment

8. Poured concrete base—6" min. thickness—extend 6"
beyond outside dimensions of enclosure with 1/2%
slope for drainage
9. Finish grade
10. Underground service
11. Meter viewing window 5” x 10”
12. 3/8” stainless anchor bolts

Specifications
The meter pedestal shall be made
entirely of stainless steel, #4
brushed finish, utilizing all welded
construction providing superior
vandal and weather resistance.
The top shall be a side swing style
that locks out for safety. The side
swing top shall fully expose the
meter compartment for ease of setting the meter and access to the
test blocks. The top shall be supported by 3 large all stainless steel
hinges with 1/4” pins that are “lift
off” style allowing the top to be
completely removed. A replaceable
5” x 10”, 3/16” thick Lexan viewing
window shall be provided.
The meter socket test block compartment shall be equipped with a
watershed drainage channel and

overlapping equipment panels that
ensures a watertight design. Within
the top meter compartment the
meter socket test block assembly
shall be installed. The top shall be
completely padlockable and
accept a utility seal.
The utility compartment shall be
located on the right side and house
the landing lugs. A cover panel that
can accommodate a padlock and
utility seal shall be provided.
The left side of the pedestal shall
house the 20” x 30” customer electrical compartment. This compartment shall be outfitted with a fully
welded and hemmed stainless
steel gasketed door that closes
against a watershed drainage
channel. The door design and all

stainless steel T handle latching
system shall ensure water
tightness and vandal resistance.
The interior portion of this
compartment shall house up to a
20 circuit capable load center with
a removable protective panel. A
stainless steel electrical backboard
shall be provided for ease of
wiring and grounding of electrical
components.
The pedestal assembly shall be a
single phase or three phase,
120V/240V or 480V rated unit.
The enclosure shall be rainproof
NEMA TYPE 3R and the assembly
shall be listed by Underwriter
Laboratories, Inc. for service
entrance equipment.

STAINLESS STEEL
METER PEDESTAL WITH ENCLOSURE

100 Amp
INSTALLATION DETAILS

1. StrongBox metered enclosure,
stainless steel, NEMA TYPE 3R—
# MPE-XX-XXKAIC
2. Hinged removable lid
3. Meter socket with test blocks
4. Load center
5. Landing lugs
6. Landing lug compartment
7. Load center compartment
8. Poured concrete base—6" min.
thickness—extend 6" beyond

Models: MPE-A16, MPE-B16, MPE-D18

outside dimensions of enclosure
with 1/2% slope for drainage
9. Finish grade
10. Underground service
11. Meter viewing window 2” x 4”
12. 3/8” stainless anchor bolts
13. Stainless mounting base in
concrete
14. SB-1852SS stainless customer
enclosure

Specifications
The meter pedestal shall be made entirely of stainless steel, #4 brushed finish, utilizing all welded construction
providing superior vandal and weather resistance.
The top shall be a side swing style
that locks out for safety. The side
swing top shall fully expose the meter
compartment for ease of setting the
meter and access to the test blocks.
The top shall be supported by 3 large
all stainless steel hinges with 1/4”
pins that are “lift off” style allowing
the top to be completely removed.
A replaceable 5” x 10”, 3/16” thick
Lexan viewing window shall
be provided.
The meter socket test block compartment shall be equipped with a watershed drainage channel and overlapping equipment panels that ensures a

watertight design. Within the top
meter compartment the meter socket
test block assembly shall be installed.
The top shall be completely padlockable and accept a utility seal.
The utility compartment shall be located on the right side and house the
landing lugs. A cover panel that can
accommodate a padlock and utility
seal shall be provided.
The left side of the pedestal shall
house the 20” x 30” customer electrical compartment. This compartment
shall be outfitted with a fully welded
and hemmed stainless steel gasketed
door that closes against a watershed
drainage channel. The door design
and all stainless steel T handle latching system shall ensure water tightness and vandal resistance.
The interior portion of this compart-

ment shall house up to a 20 circuit
capable load center with a removable
protective panel. A stainless steel
electrical backboard shall be provided for ease of wiring and grounding
of electrical components.
The pedestal assembly shall be a single phase or three phase, 120V/240V
or 480V rated unit. The enclosure
shall be rainproof NEMA TYPE 3R
and the assembly shall be UL listed
for service entrance equipment.
The enclosure section shall be of a
vandal and weather resistant nature
manufactured entirely of stainless
steel. The main housing shall be louvered upper and lower body to allow
for cross flow ventilation. Filter
screens shall cover all louvers to
deflect against water spray, insects
and dust.
A stainless steel backboard shall be
provided for the purpose of mounting
electronic and various other types of
equipment. The backboard shall be
mounted on six stainless steel bolts
that will allow for removal of the backboard. The inside door area shall
provide adequate storage for plans,
operating instructions, and scheduling information.
The enclosure door shall have a continuous stainless steel piano hinge,
carriage bolted on one side, and a
three point locking mechanism on the
other side. The edge of the door shall
be hemmed to eliminate any sharp
edges. The handle controlling the
locking mechanism shall be located
at the base of the door and be concealed within the surface of the door.
A stainless steel cam style lock shall
be mounted in the door and a provision for a padlock shall be included
within the locking mechanism. The
enclosure shall be manufactured with
a continuous drainage channel which
mates with a teardrop shaped, hollow
center, watertight, thermoplastic
door seal.
The above described product
shall be a NEMA 3R Rainproof
Enclosure as listed by Underwriter
Laboratories, Inc.

STAINLESS STEEL
METER PEDESTAL WITH ENCLOSURE

200 Amp
INSTALLATION DETAILS

Models: MPE-C20, MPE-E24

Specifications
The meter pedestal shall be made
entirely of stainless steel, #4 brushed
finish, utilizing all welded construction
providing superior vandal and
weather resistance.
The top shall be a side swing style
that locks out for safety. The side
swing top shall fully expose the meter
compartment for ease of setting the
meter and access to the test blocks.
The top shall be supported by 3 large
all stainless steel hinges with 1/4”
pins that are “lift off” style allowing
the top to be completely removed.
A replaceable 5” x 10”, 3/16” thick
Lexan viewing window shall
be provided.
The meter socket test block compartment shall be equipped with a watershed drainage channel and overlapping equipment panels that ensures a

ment shall house up to a 20 circuit
capable load center with a removable
protective panel. A stainless steel
electrical backboard shall be provided for ease of wiring and grounding
of electrical components.
The pedestal assembly shall be a single phase or three phase, 120V/240V
or 480V rated unit. The enclosure
shall be rainproof NEMA TYPE 3R
and the assembly shall be UL listed
for service entrance equipment.
The enclosure section shall be of a
vandal and weather resistant nature
manufactured entirely of stainless
steel. The main housing shall be louvered upper and lower body to allow
for cross flow ventilation. Filter
screens shall cover all louvers to
deflect against water spray, insects
and dust.
A stainless steel backboard shall be
provided for the purpose of mounting
electronic and various other types of
equipment. The backboard shall be
mounted on six stainless steel bolts
that will allow for removal of the backboard. The inside door area shall provide adequate storage for plans,
operating instructions, and scheduling information.
The enclosure door shall have a continuous stainless steel piano hinge,
carriage bolted on one side, and a
three point locking mechanism on the
other side. The edge of the door shall
be hemmed to eliminate any sharp
edges. The handle controlling the
locking mechanism shall be located
at the base of the door and be concealed within the surface of the door.
A stainless steel cam style lock shall
be mounted in the door and a provision for a padlock shall be included
within the locking mechanism. The
enclosure shall be manufactured with
a continuous drainage channel which
mates with a teardrop shaped, hollow
center, watertight, thermoplastic
door seal.
The above described product shall
be a NEMA TYPE 3R Rainproof
Enclosure as listed by Underwriter
Laboratories, Inc.

STAINLESS STEEL
METER PEDESTALS

Metered Enclosure
INSTALLATION DETAILS

1. StrongBox metered enclosure,
stainless steel, NEMA TYPE 3R
#CSP-XXX-XX
2. Hinged removable lid
3. Meter socket with test blocks
4. Load center
5. Landing lugs
6. Landing lug compartment
7. Load center compartment

Models: CSP-A, CSP-B, CSP-C

8. Poured concrete base—6” min.
thickness—extend 6” beyond
outside dimensions of enclosure
with 1/2% slope for drainage
9. Finish grade
10. Underground service
11. Meter viewing window 5” x 10”
12. 3/8” stainless anchor bolts

Specifications
The meter pedestal shall be
made entirely of stainless steel,
using welded construction
and finishing.
Pedestals shall be covered by
polyester TGIC powder coating
having a minimum thickness of
2.5 mils.
Top cover shall be a side swing
style that locks out for safety. The
swing top will open 180 degrees
to provide clear access to meter
socket and test blocks. The
swing top shall be supported by
two heavy duty stainless steel
hinges with 3/8” pins and that are
“lift off” style allowing the top to
be completely removed. The
63

Swing top shall also have
hemmed edges to eliminate
sharp edges. A replaceable
3/16” thick lexan window for
viewing shall be installed for
meter reading. Lexan window
shall be hinged and available
with hasps to lock out for safety.
The meter socket and test block
section shall be equipped with
rainwater drainage channel and
overlapping equipment panels to
ensure watertight design. The
meter socket compartment shall
house EUSERC approved commercial meter socket and test
blocks. The meter section shall
accept ring style meter and

meter face be attached to meter
socket so meter face panel may
not be removed without disconnecting meter bulb. Meter section must be padlockable for
safety as well as utility seal.
The Utility landing section shall
be the rear with a removeable
panel for full access to landing
lugs. Landing lugs shall be aluminum type lugs using hexagon
screws for tightening.
A cover panel that will accommodate a padlock and utility seal
shall be provided.
The customer section will be in
the lower front of the pedestal.
The compartment shall be fitted
with a fully welded door with
hemmed edges to eliminate
sharp edges. The door design
shall use a T-handle latching
system to ensure a watertight
seal and vandal resistance. A
continuous piano hinge shall be
used and installed using
carriage bolts.
This compartment will house a
GE load center with main breaker. the internal housing will be
fitted with a protective panel
and shall only expose the
breaker switches.
The meter pedestal assemblies
shall be 0-200Amp, single phase
only 120V/240V rated. The encl
sure shall comply with EUSERC
electrical standards and current
NEC codes. The enclosure shall
be rated NEMA TYPE 3R rainproof and be listed by
Underwriter Laboratories, Inc.

TREE & SPRINKLER SUPPORT
AND PROTECTION PRODUCTS

Cinch-Tie®
Specifications

Tree ties shall be manufactured
of virgin flexible vinyl meeting
ASTM-D-412 standards for
tensile and elongation strength.
Material shall be black for ultraviolet resistance. Tree ties shall be
manufactured with a double back
locking configuration and
secured with one galvanized nail
to prevent slippage. Tree ties
shall elongate with the tree
growth preventing damage to
the tree.

Location Guideline
Step 1. Cut the nursery provided
supports away from the young
tree.
Step 2. To determine the best
place to install Cinch-Tie, hold
the tree trunk at different points
to find the spot where the top
does not bend over. Install
the Cinch-Tie 6” taller than
this height.

MODELS
Cinch-Tie 24”

5-15 gal., single or doubles stakes

Cinch-Tie 32”

20” box and larger for single or double stakes.

How to use Cinch-Ties
Single Stake

A single stake should be placed on the side of the prevailing wind.
The tree should be supported with a minimum of two Cinch-Ties. Use
either the Standard or Figure Eight tying method.

Double Stakes

One stake should be placed on the side of the prevailing wind with
the other stake on the opposite side of the tree. The tree should be
supported with four Cinch-Ties to assure a straight, firm position. Use
either the Standard or Figure Eight tying method.

Standard Tie

Wrap Cinch-Tie around the tree trunk and the stake to form a loop. Tie
with the double-back locking configuration. Secure with a galvanized
nail driven through the Cinch-Tie and into the stake to prevent slippage.

Figure Eight Tie

Wrap Cinch-Tie around the tree trunk and the stake twisting to form a
figure eight. Tie with the double-back locking configuration. Secure
with a galvanized nail driven through the Cinch-Tie and into the stake
to prevent slippage.
64

Step 3. The first Cinch-Tie should
be placed 6” higher than the
spot on the trunk where your
hand previously determined support for the top.
Step 4. Trees should be secured
with at least two Cinch-Ties to
assure a straight, firm hold.

TREE & SPRINKLER SUPPORT
AND PROTECTION PRODUCTS

Cinch-Belt™
Specifications

The tree ties shall be manufactured of virgin flexible vinyl meeting ASTM-D412 standards for
tensile and elongation strength.
Material shall be black for ultraviolet resistance. Tree ties shall be
manufactured with a rounded
backside to protect the tree and
locked into position with a buckle.

The tree tie shall be secured to a
wooden post with one galvanized
nail, or double wrapped around a
metal post to prevent slippage.
Tree ties shall elongate with the
tree growth preventing damage
to the tree.

How to use Cinch-belt
Single Stake

A single stake should be placed on the side of the prevailing wind.
The tree should be supported with a minimum of two Cinch-Belts. Use
either the Standard or Figure Eight tying method.

Double Stakes

One stake should be placed on the side of the prevailing wind with
the other stake on the opposite side of the tree. The tree should be
supported with four Cinch-Belts to assure a straight, firm position. Use
either the Standard or Figure Eight tying method.

Standard Tie

Wrap Cinch-Belt around the tree trunk and the stake to form a loop. Insert
both ends of Cinch-Belt through buckle. Secure with as galvanized nail
driven through the Cinch-Belt and into the stake to prevent slippage.

Figure Eight Tie

Wrap Cinch-Belt around the tree trunk and the stake twisting to form a
figure eight. Insert both ends of Cinch-Belt through buckle. Secure
with a galvanized nail driven through the Cinch-Belt and into the stake
to prevent slippage.

Metal Stake Tie

Wrap Cinch-Belt around the tree trunk and double-wrap the stake to
prevent slippage. Insert both ends of Cinch-Belt through buckle.

TREE & SPRINKLER SUPPORT
AND PROTECTION PRODUCTS

Twist-Brace®
Installation Details
NOTES:

Mounting Methods

•

Stake all trees 24” box and
smaller. Install V.I.T. Products
Model TG-4 Trim Guard on all
trees planted in turf.

•

Refer to specifications for plant
pit size.

•

Install Twist-Brace per
manufacturer’s recommenda
tions.

V.I.T. Twist Brace–secure to
each pole

2” dia. lodge pole pine tree stake

Depressed watering basin
remove from turf areas during
finish grading

Finish grade

Backfill mix per specs.

Pole
Galvanized
Nails

Nail Bracket Style is designed to be
nailed directly to lodge poles or square
stakes. (TB 18, TB 24)

Flat
Washer
Nut
Lock
Washer

Lock
Washer
Nut
Flat
Washer

Bolt Style is designed for through pole
installation using either galvanized pipe
or lodge pole pines. Threaded ends are
inserted through drilled holes and bolted
securely. (TB 36, TB 42)
Model Loop Dia. Overall Length

Compacted backfill mix per
specs.

Tree

Suggested for:

Suggested Pole

4-1/2"

24"

5-15 gal. – 24" box trees

2" x 10’

TB 36

4-1/2"

24" – 30" box trees

2" x 10’

brace to be placed on the tree
by holding it parallel to the tree
trunk with the open part of the
circle on either side of the trunk.
The tree trunk shall be enclosed
in the circle as the brace is twisted at right angles to the trunk.

Specifications–BOLT STYLE
The 1/2" round threaded metal
rod shall be encased in black
U.V. resistant vinyl tubing placed
at the center of the rod. The rod
is to be bent in a 360° circle. The
meeting points of the rod shall be
spread apart permitting the

Plant packets per specs.

TB 24

Specifications–Nail bracket style
The 5/16" round metal rod shall
be encased in black U.V. resistant vinyl tubing placed at the
center of the rod. The 5/16" rod is
to be bent in a 360° circle. The
meeting points of the rod shall be
spread apart permitting the

Mounting plates with nail holes
for either square or round stakes,
shall be welded at each end of
the rod. Exposed metal ends
shall be treated with a rust
inhibiting coating.

ed at right angles to the trunk.
The threaded ends shall be
inserted through drilled holes in
the stakes or poles and secured
with nuts, lock washers and flat
washers.

TREE & SPRINKLER SUPPORT
AND PROTECTION PRODUCTS

Stabilizers and Sprinkler Ties

1.
2.
3.
4.
5.

Specifications

Pipe Stabilizer- Used in between
sprinkler heads to control movement of the pipe. The vertical
striking area provides good penetration in even the toughest soils
and minimizes the above ground
exposure. Since the hammer only
touches the vertical metal the
rounded J hook is untouched
and damage is avoided. Vinyl
covered J hooks shall protect the
pipe from damage.
Sprinkler Stabilizer- Used to

secure pipe and sprinkler heads
to prevent movement, vandalism
and damage. The vertical metal
provides area to drive the stabilizer into the soil. The vinyl covered J hooks secure the pipe to
the ground while the steel shaft
at the top gives the sprinkler
head additional support.
Sprinkler Ties- Used to secure
the sprinkler to the Sprinkler
Stabilizer. The unique design
allows fast installation while producing a strong bond between
the stake and the sprinkler head.

Pipe Stabilizer – 12", 18", 24"
Sprinkler Stabilizer – 18" 24"
ST-9 Sprinkler Tie – 9"
ST-12 Sprinkler Tie – 12"
Ratchet Tool – Automatic Twister

The stainless steel wire and the
vinyl covering produces a secure
solution to attaching sprinklers to
the stakes.
Ratchet Tool- Installation tool providing a solid grip. Attach the
Ratchet Tool hook into the eyelets
of the Sprinkler Tie and pull
back. The twisting action is
unique to the tool. This secures
the sprinkler against the stake.
The Ratchet Tool is designed to
spin wires to tighten.

LIMITED
TRADE WARRANTIES
Stainless Products
V.I.T. Products, Inc. warrants to its trade customers that its Strong Box® products will be free from original
defects in materials and workmanship for a period of ten years from the original date of purchase. It will repair
or replace at its discretion, parts found to be defective under normal use and service within the warranty
period, upon return of such parts at the trade customer’s expense. V.I.T. Products, Inc. will not be responsible
for incidental or consequential damages or for products which have been altered or modified and its liability
under this warranty is limited solely to replacement or repair of defective parts. No agent or representative
has authority to waive, alter, or add to the printed provisions of this warranty, to make any representation or
warranty not contained herein or to extend this warranty to anyone other than the Strong Box® customer. This
warranty is given expressly and in place of all other expressed or implied warranties of merchantability and
fitness for particular purpose and this warranty is the only warranty made by V.I.T. Products, Inc. V.I.T.
Products, Inc. cannot and does not assume liability for defective products, or damage caused by defective
products, not manufactured or supplied by it, even though such products be used in conjunction with Strong
Box® products. V.I.T. Products, Inc. reserves the right to redesign, alter or modify its products without incurring
any liability from anyone’s inventory of such parts or products that may be obsolete.

Cold Rolled Steel Products
V.I.T. Products, Inc. warrants to its trade customers that its Strong Box® products will be free from original
defects in materials and workmanship for a period of one year from the original date of purchase. It will repair
or replace at its discretion, parts found to be defective under normal use and service within the warranty
period, upon return of such parts at the trade customer’s expense. V.I.T. Products, Inc. will not be responsible
for incidental or consequential damages or for products which have been altered or modified and its liability
under this warranty is limited solely to replacement or repair of defective parts. No agent or representative
has authority to waive, alter, or add to the printed provisions of this warranty, to make any representation or
warranty not contained herein or to extend this warranty to anyone other than the Strong Box® customer. This
warranty is given expressly and in place of all other expressed or implied warranties of merchantability and
fitness for particular purpose and this warranty is the only warranty made by V.I.T. Products, Inc. V.I.T.
Products, Inc. cannot and does not assume liability for defective products, or damage caused by defective
products, not manufactured or supplied by it, even though such products be used in conjunction with Strong
Box® products. V.I.T. Products, Inc. reserves the right to redesign, alter or modify its products without incurring
any liability from anyone’s inventory of such parts or products that may be obsolete.

Aluminum Products
V.I.T. Products, Inc. warrants to its trade customers that its Strong Box® products will be free from original
defects in materials and workmanship for a period of five years from the original date of purchase. It will repair
or replace at its discretion, parts found to be defective under normal use and service within the warranty
period, upon return of such parts at the trade customer’s expense. V.I.T. Products, Inc. will not be responsible
for incidental or consequential damages or for products which have been altered or modified and its liability
under this warranty is limited solely to replacement or repair of defective parts. No agent or representative
has authority to waive, alter, or add to the printed provisions of this warranty, to make any representation or
warranty not contained herein or to extend this warranty to anyone other than the Strong Box® customer. This
warranty is given expressly and in place of all other expressed or implied warranties of merchantability and
fitness for particular purpose and this warranty is the only warranty made by V.I.T. Products, Inc. V.I.T.
Products, Inc. cannot and does not assume liability for defective products, or damage caused by defective
products, not manufactured or supplied by it, even though such products be used in conjunction with Strong
Box® products. V.I.T. Products, Inc. reserves the right to redesign, alter or modify its products without incurring
any liability from anyone’s inventory of such parts or products that may be obsolete.

Plastic/
Fiberglass

Carbon
Steel

Stainless
Steel

Teardrop Shaped,
Hollow Center, Water
tight, Thermoplastic
Door Seal
Enhances Lightning
Protection
UL Listed

Concealed Padlock

Graffiti Easily
Removed

Scratch Resistant
Finish

Rain Gutter
Drainage Channel

Resistant To
Corrosion

Finish Easily
Scratched–
Difficult To Repair

Graffiti Removal
Damages Finish

Cam Style Lock Only No Door Seal
No Padlock
Capability

Three-point Locking
System

Impervious To UV
Deterioration

UV
RESISTANCE

Very Slow Heat
Dissipation
Retained Heat Will
Damage Electronic
Components

Permanent Damage
To Material

Poor Reflective
Value Unless Very
Light Color Used

High Reflective
Value, Lowest
Internal
Temperatures
Minimizes Heat
Affect On
Electronics

HEAT
DISSIPATION

Finish Subject To
Fading

Subject To Corrosion Finish Subject To
Requiring Continual Fading
Maintenance

Graffiti Removal
Enhances Lightning
Damages Finish
Protection
Requiring Repainting
Door Gasket
Finish Easily
Scratched

No Cam Style Lock

Exposed Padlock

Three-point Locking
System

NEMA TYPE 3R
Rated

Rain Gutter
Drainage Channel

Three-point Locking
System

Cam Style Lock
Provided

Impervious To
Corrosion

WEATHER
RESISTANCE

High Tensile
Strength

VANDAL
RESISTANCE

No Ventilation
Contributes To
Condensation
Buildup And Heat
Retention

Non-cross flow
Louvered Door

Fan Kit Available

Filtered Cross flow
Ventilation
Minimizes Internal
Condensation
Buildup, Allows
Rapid Heat
Dissipation, Filters
Dust, Dirt & Insects

VENTILATION

Accepts QuickPad

Removable
Predrilled
Backboard Provides
For Easy Installation

Installation Template
Guides Placement
Of Low & High
Voltage Conduit
And Anchor Bolts

CONVENIENCE
OF USE

Difficult To Repaint

Subject To Fading,
Scratching

Color Difficult To
Match To Natural
Environment

Subject To Fading &
Rusting

Painted Finish
Mounting Platform
Difficult To Match To Set In Concrete
Natural Environment

Chameleon Effect
On The Natural
Brushed Stainless
Steel Finish Blends
With It’s Environment
And Provides An
Unobtrusive Quality

AESTHETICS

PRODUCT/MATERIAL
COMPARISON CHART

$1,290.00
400.00
$1,690.00

N/A
N/A
N/A

Enclosure Replacement Cost At End of 10 Years
(Adjusted for 2% annual inflation)

Removal & Reinstallation Cost
(Adjusted for 2% annual inflation)

Scrap Value
(10% of initial value)

$ 82.50

$ 480.00

$ 990.00

$ 825.00

$1,690.00

$3,437.50

Investment Recovery Time: 3.6 Years

(Initial cost plus maintenance, removal and replacement costs)

Savings At The End Of 10 Years Using Stainless Steel
$1,747.50

Total Cost Over 10 Year Period

Total Maintenance, Removal And Replacement Cost
N/A
$2,212.50

N/A

Maintenance Cost Over 10 year Period
(10% per year for cold rolled steel)

$ 465.00

$ 825.00
400.00
$1,225.00

Cold Rolled Steel

Difference In Cost of Initial Investment Using Stainless Steel

Enclosure Cost
Installation Cost
Total Initial Cost

Stainless Steel

Life Cycle Cost = Enclosure Cost + Installation Cost + Maintenance Cost + Removal & Reinstallation Cost - Scrap Value

Model # SB-18SS

Comparison Duration - 10 Years (life of typical cold rolled enclosure)

Stainless Steel vs. Cold Rolled Steel

SUSTAINABILITY & LIFE CYCLE
COST COMPARISON CHART

2063 Wineridge Place
Escondido, California 92029
(800) 729-1314
Fax: (888) 310-3946
http://www.vitproducts.com
E-Mail: sales@vitproducts.com

Area Representatives
Northern California,
Northern Nevada
JPH Group
(916) 714-0061
Southern California
Southern Nevada
Gentile & Associates
(951) 461-0942
(760) 214-5734
(619) 823-9530
Arizona
VPC Sales
(480) 772-0651
Texas
Copeland, O’Neill & Dunbar
(800) 777-9512
(512) 626-1305

Colorado, Wyoming, Montana
RepMasters, Inc.
(303) 286-7575
Idaho, Utah
Inman Interwest, Inc.
(303) 421-7885
(801) 557-4959
Mid West
Warren Thoma & Associates
(815) 477-1814
(847) 224-8843
(314) 495-7667
(507) 458-6414
Northeast
Bartlett Resources, Inc.
(508) 763-8100

Mid-Atlantic, Florida
Warren Thoma Associates
(404) 538-4871
(352) 476-7527
Hawaii
Gentile & Associates
(951) 461-0942
(760) 214-5734
(619) 823-9530
Northwest
RG Sales
(425) 481-1213
East Canada
R. Stephen Ross Associates
(585) 458-7599
10/14

Telephone (800) 729-1314 ■ FAX (888) 310-3946 ■ www.vitproducts.com

PRECISION
QUALITY CONTROLLED
At V.I.T. Products we are committed to manufacturing
the finest quality products available. We continually
evaluate and upgrade our equipment and manufacturing techniques so we can offer you enclosures
with superior fit and finish every time. For example,
our computer controlled Strippit LVD 4000 watt laser
can cut parts with tolerances as close as .003 of an
inch, so each one fits perfectly. And that’s not all.
Superior quality control is evident throughout the
manufacturing and assembly process. The end
result is a product we are proud to manufacture in
the U.S.A., and one that will give you outstanding
performance and durability for many years.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Create Date                     : 2014:12:29 11:09:25-08:00
Metadata Date                   : 2014:12:29 11:11:13-08:00
Modify Date                     : 2014:12:29 11:11:13-08:00
Creator Tool                    : Adobe InDesign CS5 (7.0.4)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 11091 bytes, use -b option to extract), (Binary data 9899 bytes, use -b option to extract)
Instance ID                     : uuid:ee63f50f-8f2c-0043-9764-57fa24d7fa94
Original Document ID            : xmp.did:012AED580B20681188C68F3B3CBE1913
Document ID                     : xmp.did:F47EBE6C2F2068118C148FE491213D04
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:012AED580B20681188C68F3B3CBE1913, xmp.iid:1DC66EA90C20681188C68F3B3CBE1913, xmp.iid:1EC66EA90C20681188C68F3B3CBE1913, xmp.iid:BE8E782B0D20681188C68F3B3CBE1913, xmp.iid:2C04344F2720681188C68F3B3CBE1913, xmp.iid:82D6F8F61B20681192B0A9AD8C81DE1B, xmp.iid:83D6F8F61B20681192B0A9AD8C81DE1B, xmp.iid:2B192174072068118C148861444E2FED, xmp.iid:CD3EA8AB0D206811994C93A312FE4431, xmp.iid:147764650E206811994C93A312FE4431, xmp.iid:167764650E206811994C93A312FE4431, xmp.iid:C5483374072068118A6D9AF3A8823452, xmp.iid:C6483374072068118A6D9AF3A8823452, xmp.iid:C7483374072068118A6D9AF3A8823452, xmp.iid:C8483374072068118A6D9AF3A8823452, xmp.iid:642A1BCE782068118A6D9AF3A8823452, xmp.iid:6F4D3474072068118C14AF627EF75DDA, xmp.iid:704D3474072068118C14AF627EF75DDA, xmp.iid:714D3474072068118C14AF627EF75DDA, xmp.iid:724D3474072068118C14AF627EF75DDA, xmp.iid:E18D3174072068118C14E225C015792D, xmp.iid:E28D3174072068118C14E225C015792D, xmp.iid:D29E0917082068118C14E225C015792D, xmp.iid:D39E0917082068118C14E225C015792D, xmp.iid:5D113274072068118C14F6E633A610E1, xmp.iid:2415368B0B2068118C14A2E8FCC3FC54, xmp.iid:CF95602B0D2068118C14A2E8FCC3FC54, xmp.iid:708394540D2068118C14A2E8FCC3FC54, xmp.iid:84DE9FBF252068118C14A2E8FCC3FC54, xmp.iid:F66942DD2D2068118C14A2E8FCC3FC54, xmp.iid:41C76591302068118C14A2E8FCC3FC54, xmp.iid:FE60F9E9332068118C14A2E8FCC3FC54, xmp.iid:2A222527382068118C14A2E8FCC3FC54, xmp.iid:219A4E74072068118A6DECFEDEE7607F, xmp.iid:67F73C74072068118A6DE9426ACF3DA4, xmp.iid:C4F742E2082068118A6DE9426ACF3DA4, xmp.iid:E2E0D2DE0A2068118A6DE9426ACF3DA4, xmp.iid:4B9C45CD0C2068118A6DE9426ACF3DA4, xmp.iid:D06BF974112068118A6DE9426ACF3DA4, xmp.iid:FAF05239132068118A6DE9426ACF3DA4, xmp.iid:E62198A9192068118A6DE9426ACF3DA4, xmp.iid:E72198A9192068118A6DE9426ACF3DA4, xmp.iid:E82198A9192068118A6DE9426ACF3DA4, xmp.iid:85A80D851D2068118A6DE9426ACF3DA4, xmp.iid:29CC5CD9212068118A6DE9426ACF3DA4, xmp.iid:B845F68F232068118A6DE9426ACF3DA4, xmp.iid:14055A43242068118A6DE9426ACF3DA4, xmp.iid:860966BC282068118A6DE9426ACF3DA4, xmp.iid:4680C9D85D2068118A6DE9426ACF3DA4, xmp.iid:526CCE3B0F2068118DBBBEB932CBD1B7, xmp.iid:19AE4A87132068118DBBBEB932CBD1B7, xmp.iid:4777A630172068118DBBBEB932CBD1B7, xmp.iid:6ADBD45B1D2068118DBBBEB932CBD1B7, xmp.iid:F603C011232068118DBBBEB932CBD1B7, xmp.iid:24B77791292068118DBBBEB932CBD1B7, xmp.iid:79A2A6212A2068118DBBBEB932CBD1B7, xmp.iid:993559782F2068118DBBBEB932CBD1B7, xmp.iid:F7405F62312068118DBBBEB932CBD1B7, xmp.iid:CCFAD1BB322068118DBBBEB932CBD1B7, xmp.iid:9C4AD2DA322068118DBBBEB932CBD1B7, xmp.iid:31D5BA0A342068118DBBBEB932CBD1B7, xmp.iid:4296D18C342068118DBBBEB932CBD1B7, xmp.iid:4396D18C342068118DBBBEB932CBD1B7, xmp.iid:D4C04F74072068118A6DAF41A5ECC421, xmp.iid:9FFE49A8222068118A6DAF41A5ECC421, xmp.iid:A0FE49A8222068118A6DAF41A5ECC421, xmp.iid:EBCAD033282068118A6DAF41A5ECC421, xmp.iid:EC1CC264322068118A6DAF41A5ECC421, xmp.iid:EBF5BD64332068118A6DAF41A5ECC421, xmp.iid:A56D81FC332068118A6DAF41A5ECC421, xmp.iid:5CBF22033A2068118A6DAF41A5ECC421, xmp.iid:CA4AE7583B2068118A6DAF41A5ECC421, xmp.iid:4657F6633D2068118A6DAF41A5ECC421, xmp.iid:6FEE33E13F2068118A6DAF41A5ECC421, xmp.iid:A09CDF23402068118A6DAF41A5ECC421, xmp.iid:9CED3A6F412068118A6DAF41A5ECC421, xmp.iid:13C12F07422068118A6DAF41A5ECC421, xmp.iid:DA5AD037472068118A6DAF41A5ECC421, xmp.iid:ACC62279492068118A6DAF41A5ECC421, xmp.iid:3246CCC34B2068118A6DAF41A5ECC421, xmp.iid:1FE6E9A46A2068118A6DAF41A5ECC421, xmp.iid:B25DFC6C6C2068118A6DAF41A5ECC421, xmp.iid:2E9A611B6D2068118A6DAF41A5ECC421, xmp.iid:9B4272740720681188C6C10FCD146BA0, xmp.iid:E847C0210A20681188C6C10FCD146BA0, xmp.iid:133820F51A20681188C6C10FCD146BA0, xmp.iid:143820F51A20681188C6C10FCD146BA0, xmp.iid:153820F51A20681188C6C10FCD146BA0, xmp.iid:163820F51A20681188C6C10FCD146BA0, xmp.iid:E3781D072420681188C6C10FCD146BA0, xmp.iid:4EF19A572720681188C6C10FCD146BA0, xmp.iid:4FF19A572720681188C6C10FCD146BA0, xmp.iid:50F19A572720681188C6C10FCD146BA0, xmp.iid:8BA63F312A20681188C6C10FCD146BA0, xmp.iid:4FDEE48E2A20681188C6C10FCD146BA0, xmp.iid:69142E63082068118C14FB2BD85F13D6, xmp.iid:741DBCFC0D2068118C14FB2BD85F13D6, xmp.iid:5466FE9E3C2068118C14FB2BD85F13D6, xmp.iid:3C1B9E583F2068118C14FB2BD85F13D6, xmp.iid:3D1B9E583F2068118C14FB2BD85F13D6, xmp.iid:D2B3F000412068118C14FB2BD85F13D6, xmp.iid:3F11F8D5412068118C14FB2BD85F13D6, xmp.iid:B28B32CD422068118C14FB2BD85F13D6, xmp.iid:B38B32CD422068118C14FB2BD85F13D6, xmp.iid:369CCC8D282068118A6DAECA6BA4AE97, xmp.iid:690A33C22C2068118A6DAECA6BA4AE97, xmp.iid:98D07874072068118A6DA62020ED1828, xmp.iid:5A733C7E072068118A6DA62020ED1828, xmp.iid:5B733C7E072068118A6DA62020ED1828, xmp.iid:B07165746F20681192B0AFC0B39CC4EF, xmp.iid:54EFF8B96F20681192B0AFC0B39CC4EF, xmp.iid:A73556D07C20681192B0AFC0B39CC4EF, xmp.iid:750B80097D20681192B0AFC0B39CC4EF, xmp.iid:C7F704D27F20681192B0AFC0B39CC4EF, xmp.iid:AE574F468020681192B0AFC0B39CC4EF, xmp.iid:AF574F468020681192B0AFC0B39CC4EF, xmp.iid:792A9AE58220681192B0AFC0B39CC4EF, xmp.iid:CBB00CBDA320681192B0AFC0B39CC4EF, xmp.iid:FC255874072068118C14E284601E9699, xmp.iid:7A4363900A2068118C14E284601E9699, xmp.iid:7B4363900A2068118C14E284601E9699, xmp.iid:7C4363900A2068118C14E284601E9699, xmp.iid:147D85730D2068118C14E284601E9699, xmp.iid:157D85730D2068118C14E284601E9699, xmp.iid:F02B59D0122068118C14E284601E9699, xmp.iid:F12B59D0122068118C14E284601E9699, xmp.iid:4E9E37571D2068118C14E284601E9699, xmp.iid:C816EA75072068118A6DF9E12BA59857, xmp.iid:051AA2740720681188C68BD5E19DB308, xmp.iid:FAE7479B0720681188C68BD5E19DB308, xmp.iid:19E6F6D90920681188C68BD5E19DB308, xmp.iid:D27AFB460C20681188C68BD5E19DB308, xmp.iid:96A90B750C20681188C68BD5E19DB308, xmp.iid:FA6BC44C0E20681188C68BD5E19DB308, xmp.iid:B8739D800F20681188C68BD5E19DB308, xmp.iid:931697421220681188C68BD5E19DB308, xmp.iid:2B5F9F311320681188C68BD5E19DB308, xmp.iid:3E85A0601320681188C68BD5E19DB308, xmp.iid:8332B19F1420681188C68BD5E19DB308, xmp.iid:E553E4BC1420681188C68BD5E19DB308, xmp.iid:E653E4BC1420681188C68BD5E19DB308, xmp.iid:6DB08B741F20681188C68BD5E19DB308, xmp.iid:5646B2D42020681188C68BD5E19DB308, xmp.iid:F61DE9172120681188C68BD5E19DB308, xmp.iid:F71DE9172120681188C68BD5E19DB308, xmp.iid:43E3BE2A2F20681188C68BD5E19DB308, xmp.iid:44E3BE2A2F20681188C68BD5E19DB308, xmp.iid:C78FF19C2F20681188C68BD5E19DB308, xmp.iid:52E9316A3020681188C68BD5E19DB308, xmp.iid:018AEC1C3720681188C68BD5E19DB308, xmp.iid:3312E774072068118C14AF57228108FE, xmp.iid:3412E774072068118C14AF57228108FE, xmp.iid:493B4E79252068118C14AF57228108FE, xmp.iid:8474BFDE252068118C14AF57228108FE, xmp.iid:8574BFDE252068118C14AF57228108FE, xmp.iid:8674BFDE252068118C14AF57228108FE, xmp.iid:0628588A272068118C14AF57228108FE, xmp.iid:78EA6B74072068118083EE78C579EBC9, xmp.iid:79EA6B74072068118083EE78C579EBC9, xmp.iid:A6BEFB78082068118083EE78C579EBC9, xmp.iid:1689275B1D2068118083EE78C579EBC9, xmp.iid:785742841D2068118083EE78C579EBC9, xmp.iid:795742841D2068118083EE78C579EBC9, xmp.iid:72425567202068118083EE78C579EBC9, xmp.iid:F698CD72222068118083EE78C579EBC9, xmp.iid:4FAD4C52242068118083EE78C579EBC9, xmp.iid:BF42EDB6242068118083EE78C579EBC9, xmp.iid:EAA37846282068118083EE78C579EBC9, xmp.iid:EBA37846282068118083EE78C579EBC9, xmp.iid:D4369E882B2068118083EE78C579EBC9, xmp.iid:DB369E882B2068118083EE78C579EBC9, xmp.iid:641780402C2068118A6DCE8F82F12E1A, xmp.iid:0F97D1BF302068118A6DCE8F82F12E1A, xmp.iid:4F72FF11322068118A6DCE8F82F12E1A, xmp.iid:281FA482322068118A6DCE8F82F12E1A, xmp.iid:66AC27EB352068118A6DCE8F82F12E1A, xmp.iid:873C88CB392068118A6DCE8F82F12E1A, xmp.iid:676F3A963C2068118A6DCE8F82F12E1A, xmp.iid:686F3A963C2068118A6DCE8F82F12E1A, xmp.iid:6AF144A3412068118A6DCE8F82F12E1A, xmp.iid:A09AA6B2422068118A6DCE8F82F12E1A, xmp.iid:9144EFDD422068118A6DCE8F82F12E1A, xmp.iid:2E6856740720681188C6961FD5D39911, xmp.iid:8930559E0B20681188C6961FD5D39911, xmp.iid:1569793D0C20681188C6961FD5D39911, xmp.iid:429A48270E20681188C6961FD5D39911, xmp.iid:B688CF380F20681188C6961FD5D39911, xmp.iid:6D7209491020681188C6961FD5D39911, xmp.iid:6E7209491020681188C6961FD5D39911, xmp.iid:B2035F361220681188C6961FD5D39911, xmp.iid:AB716F601620681188C6961FD5D39911, xmp.iid:7AEE0E0B1720681188C6961FD5D39911, xmp.iid:6CE0BFA71820681188C6961FD5D39911, xmp.iid:11500B291920681188C6961FD5D39911, xmp.iid:12500B291920681188C6961FD5D39911, xmp.iid:E6D64D74072068118C14ACC0CEC7CF0B, xmp.iid:118B85A2082068118C14ACC0CEC7CF0B, xmp.iid:73E1536C092068118C14ACC0CEC7CF0B, xmp.iid:7EED5874072068118C148219D5F15766, xmp.iid:7FED5874072068118C148219D5F15766, xmp.iid:A069C84F0B2068118C148219D5F15766, xmp.iid:70F5D2980C2068118C148219D5F15766, xmp.iid:FB21284F0D2068118C148219D5F15766, xmp.iid:2B3E65FA262068118C14FB34A157CCC8, xmp.iid:4912FB882A2068118C14FB34A157CCC8, xmp.iid:B2A4D42B2B2068118C14FB34A157CCC8, xmp.iid:C45838BE2E2068118C14FB34A157CCC8, xmp.iid:E94D20112F2068118C14FB34A157CCC8, xmp.iid:373189B82F2068118C14FB34A157CCC8, xmp.iid:FC822EED2F2068118C14FB34A157CCC8, xmp.iid:00084602302068118C14FB34A157CCC8, xmp.iid:F5D45A71302068118C14FB34A157CCC8, xmp.iid:F5D75278072068118C149070F01DE558, xmp.iid:5ECE4274072068118C14EB544ADF0386, xmp.iid:E14FB5B1072068118C14EB544ADF0386, xmp.iid:E24FB5B1072068118C14EB544ADF0386, xmp.iid:B6686C03092068118C14EB544ADF0386, xmp.iid:9D134B2A122068118C14EB544ADF0386, xmp.iid:A33F5062122068118C14EB544ADF0386, xmp.iid:F3F06978282068118C14EB544ADF0386, xmp.iid:E4DD629C282068118C14EB544ADF0386, xmp.iid:76924D74072068118C148FE491213D04, xmp.iid:AFED8FB6072068118C148FE491213D04, xmp.iid:5D334DE3072068118C148FE491213D04, xmp.iid:0C56B800082068118C148FE491213D04, xmp.iid:DA03B033082068118C148FE491213D04, xmp.iid:AD0AC76F082068118C148FE491213D04, xmp.iid:75F07893082068118C148FE491213D04, xmp.iid:885808A7082068118C148FE491213D04, xmp.iid:80CF76C0082068118C148FE491213D04, xmp.iid:F4D383F4082068118C148FE491213D04, xmp.iid:F5D383F4082068118C148FE491213D04, xmp.iid:F725164B092068118C148FE491213D04, xmp.iid:58FF0D55092068118C148FE491213D04, xmp.iid:88DC8E77092068118C148FE491213D04, xmp.iid:9B82988C092068118C148FE491213D04, xmp.iid:D75CBEB0092068118C148FE491213D04, xmp.iid:EAA237CF092068118C148FE491213D04, xmp.iid:EBA237CF092068118C148FE491213D04, xmp.iid:6EAB55250A2068118C148FE491213D04, xmp.iid:D6F49A5B0B2068118C148FE491213D04, xmp.iid:2D2FBE970B2068118C148FE491213D04, xmp.iid:398F1FB20B2068118C148FE491213D04, xmp.iid:3A8F1FB20B2068118C148FE491213D04, xmp.iid:3B8F1FB20B2068118C148FE491213D04, xmp.iid:A9552A76202068118C148FE491213D04, xmp.iid:7558FE5E2C2068118C148FE491213D04, xmp.iid:82227A4C2D2068118C148FE491213D04, xmp.iid:681555892E2068118C148FE491213D04, xmp.iid:F70A1BDC2E2068118C148FE491213D04, xmp.iid:F47EBE6C2F2068118C148FE491213D04, xmp.iid:AC803874072068118C14E020BA87CAEA, xmp.iid:09E4E2A3092068118C14E020BA87CAEA
History When                    : 2014:08:11 15:51:22-07:00, 2014:08:11 16:00:15-07:00, 2014:08:11 16:00:15-07:00, 2014:08:11 16:03:53-07:00, 2014:08:11 20:37:52-07:00, 2014:08:14 16:14:51-07:00, 2014:08:14 16:14:51-07:00, 2014:08:15 09:58:16-07:00, 2014:08:15 11:05:51-07:00, 2014:08:15 11:11:03-07:00, 2014:08:15 20:06:18-07:00, 2014:08:18 07:11:07-07:00, 2014:08:18 07:18:22-07:00, 2014:08:18 07:20:31-07:00, 2014:08:18 07:25:51-07:00, 2014:08:18 20:42:32-07:00, 2014:08:19 08:48:56-07:00, 2014:08:19 13:09:26-07:00, 2014:08:19 13:09:26-07:00, 2014:08:19 13:24:29-07:00, 2014:08:20 09:55:19-07:00, 2014:08:20 09:58:45-07:00, 2014:08:20 09:59:52-07:00, 2014:08:20 10:15:31-07:00, 2014:08:27 19:50:09-07:00, 2014:09:03 10:58:25-07:00, 2014:09:03 11:10:03-07:00, 2014:09:03 11:11:12-07:00, 2014:09:03 14:06-07:00, 2014:09:03 15:04:05-07:00, 2014:09:03 15:23:27-07:00, 2014:09:03 15:47:24-07:00, 2014:09:03 16:17:44-07:00, 2014:09:04 19:50:26-07:00, 2014:09:08 10:17:01-07:00, 2014:09:08 10:27:15-07:00, 2014:09:08 10:41:28-07:00, 2014:09:08 10:55:18-07:00, 2014:09:08 11:28:37-07:00, 2014:09:08 11:41:16-07:00, 2014:09:08 12:27:22-07:00, 2014:09:08 12:32:58-07:00, 2014:09:08 12:43:32-07:00, 2014:09:08 12:54:58-07:00, 2014:09:08 13:25:58-07:00, 2014:09:08 13:38:14-07:00, 2014:09:08 13:43:15-07:00, 2014:09:08 14:15:16-07:00, 2014:09:08 20:35:27-07:00, 2014:09:10 11:14:49-07:00, 2014:09:10 11:45:34-07:00, 2014:09:10 12:11:46-07:00, 2014:09:10 12:55:56-07:00, 2014:09:10 13:36:48-07:00, 2014:09:10 14:23:20-07:00, 2014:09:10 14:27:22-07:00, 2014:09:10 15:05:35-07:00, 2014:09:10 15:19:17-07:00, 2014:09:10 15:28:56-07:00, 2014:09:10 15:29:48-07:00, 2014:09:10 15:38:18-07:00, 2014:09:10 15:41:57-07:00, 2014:09:10 15:44-07:00, 2014:09:11 08:15:28-07:00, 2014:09:11 11:30:12-07:00, 2014:09:11 11:40:43-07:00, 2014:09:11 12:09:53-07:00, 2014:09:11 13:22:50-07:00, 2014:09:11 13:30-07:00, 2014:09:11 13:34:14-07:00, 2014:09:11 14:17:23-07:00, 2014:09:11 14:26:56-07:00, 2014:09:11 14:41:34-07:00, 2014:09:11 14:59:23-07:00, 2014:09:11 15:01:15-07:00, 2014:09:11 15:10:30-07:00, 2014:09:11 15:14:45-07:00, 2014:09:11 15:51:55-07:00, 2014:09:11 16:08:03-07:00, 2014:09:11 16:24:27-07:00, 2014:09:11 20:05:30-07:00, 2014:09:11 20:18:16-07:00, 2014:09:11 20:23:08-07:00, 2014:09:12 10:23:48-07:00, 2014:09:12 10:42:58-07:00, 2014:09:12 12:43:25-07:00, 2014:09:12 12:47:12-07:00, 2014:09:12 13:12:51-07:00, 2014:09:12 13:14:12-07:00, 2014:09:12 13:48:20-07:00, 2014:09:12 14:12:04-07:00, 2014:09:12 14:13:47-07:00, 2014:09:12 14:17:43-07:00, 2014:09:12 14:32:28-07:00, 2014:09:12 14:35:05-07:00, 2014:09:15 08:32:22-07:00, 2014:09:15 09:12:27-07:00, 2014:09:15 14:55:56-07:00, 2014:09:15 15:15:27-07:00, 2014:09:15 15:17:30-07:00, 2014:09:15 15:27:18-07:00, 2014:09:15 15:33:16-07:00, 2014:09:15 15:40:11-07:00, 2014:09:15 15:43:09-07:00, 2014:09:16 16:00:59-07:00, 2014:09:16 16:31:05-07:00, 2014:09:18 10:46:19-07:00, 2014:09:18 10:46:35-07:00, 2014:09:18 11:00:51-07:00, 2014:09:25 09:30:02-07:00, 2014:09:25 09:31:58-07:00, 2014:09:25 11:05:40-07:00, 2014:09:25 11:07:16-07:00, 2014:09:25 11:27:11-07:00, 2014:09:25 11:30:26-07:00, 2014:09:25 11:41:07-07:00, 2014:09:25 11:49:12-07:00, 2014:09:25 15:44:18-07:00, 2014:09:30 13:13:34-07:00, 2014:09:30 13:35:50-07:00, 2014:09:30 13:52:50-07:00, 2014:09:30 13:54:18-07:00, 2014:09:30 13:56:30-07:00, 2014:09:30 13:57:07-07:00, 2014:09:30 14:34:53-07:00, 2014:09:30 14:39:41-07:00, 2014:09:30 15:50:14-07:00, 2014:10:01 19:06:31-07:00, 2014:10:21 10:43:35-07:00, 2014:10:21 10:44:40-07:00, 2014:10:21 11:00:44-07:00, 2014:10:21 11:18:06-07:00, 2014:10:21 11:19:23-07:00, 2014:10:21 11:32:34-07:00, 2014:10:21 11:41:11-07:00, 2014:10:21 12:00:55-07:00, 2014:10:21 12:07:36-07:00, 2014:10:21 12:08:55-07:00, 2014:10:21 12:17:51-07:00, 2014:10:21 12:18:40-07:00, 2014:10:21 12:19:07-07:00, 2014:10:21 13:35:23-07:00, 2014:10:21 13:45:14-07:00, 2014:10:21 13:47:06-07:00, 2014:10:21 13:50:10-07:00, 2014:10:21 15:27:51-07:00, 2014:10:21 15:30:17-07:00, 2014:10:21 15:31:03-07:00, 2014:10:21 15:36:47-07:00, 2014:10:21 16:24:44-07:00, 2014:10:22 10:57:38-07:00, 2014:10:22 10:59:43-07:00, 2014:10:22 14:32:31-07:00, 2014:10:22 14:35:21-07:00, 2014:10:22 14:36:46-07:00, 2014:10:22 14:41:11-07:00, 2014:10:22 14:47:18-07:00, 2014:10:23 12:07:24-07:00, 2014:10:23 12:14:40-07:00, 2014:10:23 12:14:41-07:00, 2014:10:23 14:44:10-07:00, 2014:10:23 14:45:19-07:00, 2014:10:23 14:58:26-07:00, 2014:10:23 15:05:59-07:00, 2014:10:23 15:20:38-07:00, 2014:10:23 15:34:02-07:00, 2014:10:23 15:36:51-07:00, 2014:10:23 16:02:20-07:00, 2014:10:23 16:22:11-07:00, 2014:10:23 16:25:40-07:00, 2014:10:23 17:28:43-07:00, 2014:10:24 12:31:29-07:00, 2014:10:24 13:03:40-07:00, 2014:10:24 13:13:08-07:00, 2014:10:24 13:16:17-07:00, 2014:10:24 13:40:40-07:00, 2014:10:24 14:08:25-07:00, 2014:10:24 14:28:24-07:00, 2014:10:24 15:00:34-07:00, 2014:10:24 15:04:34-07:00, 2014:10:24 15:12:09-07:00, 2014:10:24 15:13:22-07:00, 2014:10:26 09:29:41-07:00, 2014:10:26 09:59:30-07:00, 2014:10:26 10:03:57-07:00, 2014:10:26 10:17:39-07:00, 2014:10:26 10:25:17-07:00, 2014:10:26 10:32:54-07:00, 2014:10:26 10:39:57-07:00, 2014:10:26 10:46:42-07:00, 2014:10:26 11:16:31-07:00, 2014:10:26 11:21:17-07:00, 2014:10:26 11:32:49-07:00, 2014:10:26 11:36:26-07:00, 2014:10:26 11:37:51-07:00, 2014:10:26 15:59:06-07:00, 2014:10:26 16:07:33-07:00, 2014:10:26 16:13:11-07:00, 2014:10:27 10:28:47-07:00, 2014:10:27 10:34:32-07:00, 2014:10:27 10:56:24-07:00, 2014:10:27 11:05:36-07:00, 2014:10:27 11:10:42-07:00, 2014:10:29 14:36:40-07:00, 2014:10:29 15:02:07-07:00, 2014:10:29 15:06:41-07:00, 2014:10:29 15:32:15-07:00, 2014:10:29 15:34:34-07:00, 2014:10:29 15:39:15-07:00, 2014:10:29 15:40:43-07:00, 2014:10:29 15:41:18-07:00, 2014:10:29 15:44:25-07:00, 2014:10:29 20:41:24-07:00, 2014:10:30 08:25:36-07:00, 2014:10:30 08:27:19-07:00, 2014:10:30 08:33:44-07:00, 2014:10:30 08:36:46-07:00, 2014:10:30 09:42:16-07:00, 2014:10:30 09:43:50-07:00, 2014:10:30 12:21:56-07:00, 2014:10:30 12:22:57-07:00, 2014:11:04 10:31:03-08:00, 2014:11:04 10:32:54-08:00, 2014:11:04 10:34:09-08:00, 2014:11:04 10:34:59-08:00, 2014:11:04 10:36:24-08:00, 2014:11:04 10:38:05-08:00, 2014:11:04 10:39:05-08:00, 2014:11:04 10:39:38-08:00, 2014:11:04 10:40:21-08:00, 2014:11:04 10:41:48-08:00, 2014:11:04 10:43:32-08:00, 2014:11:04 10:44:13-08:00, 2014:11:04 10:44:30-08:00, 2014:11:04 10:45:28-08:00, 2014:11:04 10:46:03-08:00, 2014:11:04 10:47:04-08:00, 2014:11:04 10:47:55-08:00, 2014:11:04 10:48:57-08:00, 2014:11:04 10:50:19-08:00, 2014:11:04 10:59-08:00, 2014:11:04 11:00:41-08:00, 2014:11:04 11:01:25-08:00, 2014:11:04 11:02:50-08:00, 2014:11:04 11:04:15-08:00, 2014:11:04 14:53:56-08:00, 2014:11:04 14:55:19-08:00, 2014:11:04 15:01:58-08:00, 2014:11:04 15:10:49-08:00, 2014:11:04 15:17:10-08:00, 2014:11:04 15:17:11-08:00, 2014:12:19 09:28-08:00, 2014:12:19 11:38:58-08:00
History Software Agent          : Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /, /metadata, /, /, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata
Derived From Instance ID        : xmp.iid:F70A1BDC2E2068118C148FE491213D04
Derived From Document ID        : xmp.did:A6BEFB78082068118083EE78C579EBC9
Derived From Original Document ID: xmp.did:012AED580B20681188C68F3B3CBE1913
Derived From Rendition Class    : default
Doc Change Count                : 10807
Key Stamp Mp                    : AAAAAA==
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 72
Creator                         : Adobe InDesign CS5 (7.0.4)

EXIF Metadata provided by EXIF.tools

TDC 100/200 2014 Vit Catalog COMP4

Navigation menu

Versions of this User Manual:

Views

Navigation