4695_RevBA 2_cd 4695
User Manual: 4695
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
Product Data Sheet 00813-0100-4695, Rev BA Catalog 2002 – 2003 Model 580 Model 580 Digital Process Indicators Series • Economical and Flexible • Accepts Thermocouple, RTD, Current, or Voltage Input • Front Panel Alarm Capability • Configures Easily Content Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page Accessories-34 Dimensional Drawings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page Accessories-36 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page Accessories-38 www.rosemount.com Product Data Sheet 00813-0100-4695, Rev BA Catalog 2002 – 2003 Model 580 This product data sheet discusses the features, benefits, and specifications of Rosemount® Model 580 digital process indicators. Two types of Model 580 process indicator are available: The pressure indicating Model 580D, and the temperature indicating Model 580T. For information about other Rosemount process indicators, see the Other Rosemount Digital Process Indicators section of this product data sheet. Following the Rosemount Inc. philosophy of economically tiered pressure and temperature product lines, we now offer an economical alternative for control room digital process indication. The Model 580 series of digital process indicators are flexible, user-configurable units. They offer a reliable and cost-effective solution to your digital process indication needs, without compromising the performance that is characteristic of other Rosemount process indicators. In addition, these units are always readily available for shipment. MODEL 580D FEATURES The Model 580D Process Indicator is a dc input indicator that combines flexible scaling with four-digit resolution and high accuracy. This indicator accepts either 0–20 mA or 0–10 mV full scale input. You can scale these ranges, or any subset (4–20 mA, 1–5 V) of these ranges, and calibrate the indicator to display engineering units from the dc input. The Model 580D can be scaled to any range between –999 to 9999 using two push buttons located behind the snap-off lens. These buttons also set zero (low), full-scale (high), and the decimal point. In addition to flexible scaling, the microprocessor-based Model 580D provides excellent measurement stability, one digit repeatability, and 0.02 percent accuracy. Another feature of the Model 580D is its ability to power transmitters directly through an optional, built-in dc power supply. When Option Code E is specified, the Model 580D provides 24 V dc at 30 mA. This power supply replaces more expensive external power supplies and is electrically floating, allowing it to be grounded anywhere. As shown in the wiring diagrams on page Accessories-37, wiring the power supply is easy because all connections (four-wire and two-wire) are made to the removable rear terminal block. Accessories-32 MODEL 580T FEATURES The Model 580T supports 0.1° resolution for temperature measurements below 1000°, and for temperature measurements above 1000°, the Model 580T automatically switches to a 1° resolution. It also supports seven thermocouple sensor types: J, K, T, E, R, S, and B, and two 100 Ω three-wire, Platinum RTDs, either 0.00385 or 0.00392α. Select any one of these input types using a rotary switch located behind the snap-off lens. A DIP switch located in the same area enables you to display either degrees Fahrenheit or Celsius. MODEL 580 OPTIONS Model 580 process indicators are rack mountable onto standard 19-inch instrument racks, and support either an alarm setpoint or a multiple input option. To order either option, refer to the ordering information table. If not ordered originally with the indicator, either option can be installed easily in the field. Alarm Setpoint Easily set a single or dual alarm at any point within the display range with the Model 580 alarm option. Digitally set the setpoints using the two buttons on the front panel, and specify the high or low alarm selection by moving a jumper on the option card. If the indicator is set to dual alarm, you must set each alarm independently. A front panel LED clearly illuminates to indicate alarms. The alarm setpoint option card includes a Form C, 0.5 A relay connection for external alarms or contact elements. For normally open or normally closed operation, relay terminals are provided at the rear of the indicator. Multiple Inputs The multiple inputs option enables a Model 580 to receive up to six commonly scaled inputs. A rotary switch on the front panel allows convenient selection of the desired input type, and a removable terminal strip promotes easy sensor wiring. In addition, both voltage and current inputs are acceptable, however they cannot be combined in a single unit. Product Data Sheet 00813-0100-4695, Rev BA Catalog 2002 – 2003 Model 580 Rack Adaptor Plates For mounting Model 580 process indicators on standard 19-inch instrument racks, we provide optional adaptor plates. Four types of adaptors are available for mounting one to four indicators. OTHER ROSEMOUNT DIGITAL PROCESS INDICATORS In addition to the Model 580 process indicators, Rosemount Inc. offers the Model 751 Digital or Analog Process Indicator. Refer to the Model 751 product data sheet, document number 00813-0100-4378. MODEL 580T 10-M INDICATOR WITH 6 CHANNEL INPUT MODEL 580D 10-A INPUT WITH ALARM MODEL 580T 10-A TEMPERATURE INPUT WITH ALARM 580--73a FIGURE 1. Model 580 Process Indicators Accessories-33 Product Data Sheet 00813-0100-4695, Rev BA Catalog 2002 – 2003 Model 580 Specifications MODEL 580D SPECIFICATIONS Performance Specifications Functional Specifications Environmental Ranges Repeatability ±1 count Operating Range 40 to 110 °F (5 to 45 °C) Storage Stability with Temperature –40 to 150 °F (–40 to 65 °C) Zero Humidity µ V/°C Less than or equal to 80% RH non-condensing Span 0.01% rdg/°C Stability with Time Alarm Relay Contact Rating 0.5 A @ 120 V ac (non-inductive load) Form C 10 counts/year maximum Power Noise Rejection 115/230 V ac ±10%, 50/60 Hz, 400 Hz NMRR Warranty 60 dB @ 50/60 Hz, ±0.1 Hz One year CMRR Physical Specifications 120 dB @ 50/60 Hz, ±0.1 Hz with 250 Ω unbalance Overload Protection Power Lead to Ground 1,500 V dc or V ac rms Case Construction One piece black plastic Dimensions See “Model 580 Dimensional Drawings” on page 36 Across Inputs, Voltage Up to 250 V dc or V ac for one minute, V+ to V– Weight 1 lb. (454 g) Current Up to 150 mA dc or mA ac for one minute, I+ to I– Input Impedance MODEL 580T SPECIFICATIONS Functional Specifications Voltage 1 MΩ Current 5Ω Repeatability ±1 count Stability with Temperature Read Rate Zero 2 per second nominal 1 µ V/°C Display Span 7-segment red/orange LED. 0.56 in. H (14.2) 0.01% rdg/°C Thermocouple Reference Junction, Internal, Automatic 0.03 °C/°C, 40 to 110 °F (5 to 45 °C) Break Detection Upscale approximately 50 nA Accessories-34 Product Data Sheet 00813-0100-4695, Rev BA Catalog 2002 – 2003 Model 580 Stability with Time Display 1°/year 7-segment red/orange LED 0.56 in. H (14.2) Noise Rejection Performance Specifications NMRR Environmental Ranges 60 dB @ 50/60 Hz, ±0.1 Hz Operating range CMRR 40 to 110 °F (5 to 45 °C) 120 dB @ 50/60 Hz, ±0.1 Hz. with 250 Ω unbalance Storage Overload Protection –40 to 150 °F (–40 to 65 °C) Power Lead to Ground Humidity 1500 V dc or V ac rms Less than or equal to 80% RH non-condensing Across Inputs, Thermocouple Model, T/C Multi-input Option Accuracy Up to 250 V dc or V ac for one minute, V+ to V– Add ±0.5 °C/±1 °F to instrument accuracy specification RTD Alarm Relay Contact Rating Up to 62 V dc or V ac for one minute, V+ to V– 0.5 A @ 120 V ac (non-inductive load) Form C Input Impedance Power Thermocouple 115/230 V ac ±10%, 50/60 Hz, 400 Hz 20 MΩ, exclusive of break detect current effects Warranty RTD One year 16.9 kΩ, V+ input. 16.9 kΩ, I input Physical Specifications RTD Lead Wire Error at 150 µ A excitation current 40 mΩ per ohm of equal resistance in V+ and V– leads 1 Ω per ohm of unbalance in V+ and V– leads Case Construction One piece black plastic Dimensions Point Update Rate See “Model 580 Dimensional Drawings” on page 36 2 per second Nominal Weight 1° readings 1 lb. (454 g) 1 per second nominal 0.1° readings TABLE 1. dc Range INPUT RANGE(1) 0–20 mA 0–10 mV DISPLAY RANGE(1) ACCURACY User scalable between –999 and 9999 User scalable between –999 and 9999 0.02% rdg, ±1 count 0.02% rdg, ±1 count (1) Maximum sensitivity: 200 µ V/count; 0/4 µ A/count. Minimum sensitivity: 1 count. TABLE 2. Thermocouple Ranges 1° RESOLUTION SENSOR TYPE Iron-Constantan J Chromel-Alumel K Copper-Constantan T Chromel-Constantan E RANGE/DISPLAY –337 to 1403 °F –205 to 762 °C –331 to 2510 °F –202 to 1377 °C –346 to 755 °F –210 to 401 °C –338 to 1835 °F –205 to 1002 °C ACCURACY (±) 1°, +0.03% 1°, +0.03% 1°, +0.03% 1°, +0.03% 1°, +0.03% 1°, +0.03% 1°, +0.03% 1°, +0.03% 1° RESOLUTION (1) RANGE/DISPLAY –99.9 to 999.9 °F –99.9 to 761.8 °C –99.9 to 999.9 °F –99.9 to 999.9 °C –99.9 to 754.6 °F –99.9 to 401.1 °C –99.9 to 999.9 °F –99.9 to 999.9 °C ACCURACY (±) 0.9° 0.5° 0.9° 0.5° 0.9° 0.5° 0.9° 0.5° Accessories-35 Product Data Sheet 00813-0100-4695, Rev BA Catalog 2002 – 2003 Model 580 TABLE 2. Thermocouple Ranges 1° RESOLUTION SENSOR TYPE RANGE/DISPLAY Platinum- Platinum 13%, Rhodium R 32 to 3216 °F 0 to 1769 °C 32 to 3218 °F 0 to 1770 °C 601 to 3325 °F 316 to 1829 °C Platinum- Platinum 10%, Rhodium S Platinum 30%, Rhodium- Platinum 6%, Rhodium B 1° RESOLUTION ACCURACY (±)(1) RANGE/DISPLAY ACCURACY (±) 1°, +0.05% 1°, +0.05% 1°, +0.05% 1°, +0.05% 1°, +0.05% 1°, +0.05% (1) Accuracy percentage is of reading, ±1 digit. TABLE 3. RTD Range 1° RESOLUTION SENSOR TYPE Platinum 100 Ω 3-wire α 0.00385 Platinum 100 Ω 3-wire α 0.00392 1° RESOLUTION ACCURACY (±)(1) RANGE/DISPLAY –329 to 1585 °F –200 to 863 °C –332 to 1563 °F –202 to 851 °C 1°, +0.03% 1°, +0.03% 1°, +0.03% 1°, +0.03% RANGE/DISPLAY –99.9 to 999.9 °F –99.9 to 862.6 °C –99.9 to 999.9 °F –99.9 to 850.8 °C ACCURACY (±) 0.9° 0.5° 0.9° 0.5° (1) Accuracy percentage is of reading, ±1 digit. Dimensional Drawings Model 580 Dimensional Drawings 0.27 (7) 3.62 (92) 4.92 (125) 1.69 (43) 1.77 (45) PANEL CUTOUT DIMENSIONS ½ DIN STANDARD 5.63 (143) 1.89 (48) 580 Series 3.44 (87) 3.72 (94) 3.72 (94) FACE DIMENSIONS TOP DIMENSIONS NOTE Dimensions are in inches (millimeters). (1) Character height is 0.56 (14.2). Accessories-36 580-0090A, 0091A, 0093A, 0092A SIDE DIMENSIONS 2 (51) 0.94(1) (24) 0.38 (95) Product Data Sheet 00813-0100-4695, Rev BA Catalog 2002 – 2003 Model 580 Models 580D and 580T Wiring Diagrams 30 mA @ 24 V dc Excitation V dc –V +V + + T/C ac Power ac Power + – – – Neutral Gnd (White) (Green) Neutral (White) RTD Gnd (Green) Hot (Black) Hot (Black) MODEL 580D MODEL 580T 580-0086A, 0089A mA dc 4- and 2-Wire Excitation Wiring Diagrams ac Power ac Power Jumper Line Gnd Neu Line Gnd Neu –V – I Voltage Input +I Current Input + – 30 mA @ 24 V dc Excitation From Transducer/Transmitter + Power Supply 4-WIRE MODE To Transducer/Transmitter – Power Supply 2-WIRE CURRENT LOOP MODE 580-0094A, 0095A +V Accessories-37 Product Data Sheet 00813-0100-4695, Rev BA Catalog 2002 – 2003 Model 580 Ordering Information Model 580 Code D T Code 10 20 Code A B M E Product Description Digital Process Indicator Input dc Input Temperature Sensor Input Line Voltage Set for 115 V ac Set for 230 V ac Options Single Alarm Dual Alarm Six Channel Selection 30 mA @ 24 V dc Excitation (Model 580D only) Typical Model Number: 580 D 10 A Spare Parts List Part Number Description R580D-HBK1 R580T-HBK1 RKS1 RKS2 RKS3 RKS4 Owner’s Manual Owner’s Manual 19-in. Rack Mount Adapter 19-in. Rack Mount Adapter 19-in. Rack Mount Adapter 19-in. Rack Mount Adapter Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc. PlantWeb is a registered trademark of one of the Emerson Process Management group of companies. All other marks are the property of their respective owners. Emerson Process Management Rosemount Inc. 8200 Market Boulevard Chanhassen, MN 55317 USA T (U.S.) 1-800-999-9307 T (International) (952) 906-8888 F (952) 949-7001 Fisher-Rosemount GmbH & Co. Shipping Address: Argelsrieder Feld 3 82234 Wessling Germany Tel 49 (8153) 9390 Fax 49 (8153) 939172 www.rosemount.com ¢00813-0100-4695u¤ © 2002 Rosemount Inc. All rights reserved. Fisher-Rosemount Singapore Pte Ltd. 1 Pandan Crescent Singapore 128461 Tel (65) 777-8211 Fax (65) 777-0947 AP.RMT-Specialist@emersonprocess.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Modify Date : 2002:05:17 15:24:21-04:00 Create Date : 1999:02:04 16:49:40Z Page Count : 8 Creation Date : 1999:02:04 16:49:40Z Mod Date : 2002:05:17 15:24:21-04:00 Producer : Acrobat Distiller 5.0 (Windows) Author : kellrus Metadata Date : 2002:05:17 15:24:21-04:00 Creator : kellrus Title : 4695_RevBA-2_cd.fm Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools