Cisco TelePresence MX300 G2 Wall Mounting Installation Sheet Tele Presence 78 100147 01 Wallmount For Web

User Manual: TelePresence MX300

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

Installing Cisco TelePresence MX300 G2 - Wall Mount

This installation guide covers MX300 G2 with a wall-mount bracket.

Dimensions
Height: 948 mm / 37.4 in.
Width: 1278 mm / 50.4 in.
Depth: 200 mm / 7.9 in.
Weight total: 40 kg / 88 lb

Manpower
Two people working together are required to mount
the system.

Room setup
Explore the Cisco Project Workplace website to
find inspiration and guidelines when preparing your
office or meeting room for video conferencing,
http://www.cisco.com/go/projectworkplace

Documentation
Cisco Spark: Visit the Cisco Spark help site to find
more information about Spark registered room
systems, http://help.ciscospark.com
Other services: Visit the Cisco web site to find user
guides and compliance and safety information for
the video system, http://www.cisco.com/go/mx-docs

78-101186-01A0 | JUNE 2017 | © 2017 Cisco Systems, Inc. All rights reserved.

1

Installing Cisco TelePresence MX300 G2 - Wall Mount

B

Monitor

Accessories:

C

• Microphones
• Cables
• Screws for mounting
the bottom adapter
• Gloves

D

Touch controller

A

•
•
•
•
78-101186-01A0 | JUNE 2017 | © 2017 Cisco Systems, Inc. All rights reserved.

Wall and monitor brackets
Bottom adapter
Back cover
Screwdrivers

The packaging may be slightly
different for some shipments.

2

Installing Cisco TelePresence MX300 G2 - Wall Mount

1

Mounting the monitor bracket

1

Use gloves when
handling the monitor.

Lay the monitor gently face
down on a steady, soft surface.
Take care not to subject the camera
for any stress (turn it parallel to the
monitor).
Unscrew these four screws. You will reuse them when fastening the bracket.

2

Fasten the bracket with the four
screws that you just removed.
78-101186-01A0 | JUNE 2017 | © 2017 Cisco Systems, Inc. All rights reserved.

3

Installing Cisco TelePresence MX300 G2 - Wall Mount

2

Mounting the bottom adapter

2 × M6x16

Remove the cable
channel lid for now.
You need it in step 4.

78-101186-01A0 | JUNE 2017 | © 2017 Cisco Systems, Inc. All rights reserved.

4

Installing Cisco TelePresence MX300 G2 - Wall Mount

3

Connecting the cables
Touch
controller

**

LAN **

DVI-I

HDMI
Thread the cables up through
the hole in the bracket before
you connect them.

Video output
(e.g. 2nd display *)

Video input
(e.g. PC *)

Audio line input
Power switch

Power (100-240 VAC,
50/60 Hz)
Always use the provided power cable.
The wall socket outlet must be easily
accessible after installation.
78-101186-01A0 | JUNE 2017 | © 2017 Cisco Systems, Inc. All rights reserved.

Audio line output

Microphones

USB, for future use
For maintenance only
Reset to factory settings

*

Optional

**
Use the cable that is labeled
with
for the Touch controller;
use the cable that is labeled
for the LAN
with

5

Installing Cisco TelePresence MX300 G2 - Wall Mount

4

Snapping on the cable channel lid

Snap on the cable
channel lid for strain relief.

78-101186-01A0 | JUNE 2017 | © 2017 Cisco Systems, Inc. All rights reserved.

5

Mounting the back cover

Lift this handle to lock/
unlock the back cover. Use
both hands if required.

6

Installing Cisco TelePresence MX300 G2 - Wall Mount

6

Mounting the monitor to the wall
Due to the size and mass of this product, it is
important that the wall-mounted system is safely
installed according to these installation instructions.
The wall and mounting hardware must be able to
safely support the product.

Use gloves when
handling the monitor.
40 kg / 88 lb
(including brackets)

The wall-mounted system must be installed by
qualified personnel, in accordance with state and
local building regulations.

Tighten the upper
setting screw to
lock the monitor to
the bracket.

Fix the bracket to the wall
with four screws. Use screws
and anchors suiting your
type of wall (not provided).
Verify that the bracket is level
before securing it to the wall.

Recommended distance
for regular meeting rooms:

78-101186-01A0 | JUNE 2017 | © 2017 Cisco Systems, Inc. All rights reserved.

0.76 m
(30 in.)

Tighten the lower
setting screw to
fix the monitor
parallel to the wall.

7

Installing Cisco TelePresence MX300 G2 - Wall Mount

7

Starting up the system
• Connect to power and LAN/Ethernet.
• Switch on the system.
The power switch is placed next to the power
connector and can be accessed through the
back cover.
Wait while the unit starts up.
Normally this takes a few minutes. It may
include automatic software upgrade and restart
of the Touch controller.

EMC Class A declaration
WARNING: This is a class A product. In a domestic environment
this product may cause radio interference in which case the
user may be required to take adequate measures.

声 明
此为A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种
情况下，可能需要用户对其干扰采取切实可行的措施。
WARNING: This is a class A product. In a domestic environment
this product may cause radio interference in which case the user
may be required to take adequate measures.

• Follow the instructions on the Touch controller.
Cisco Spark: To find more information on how to get started with
Spark registered systems, visit http://help.ciscospark.com and look
for Getting Started articles for room systems.
Other services: For further information on set-up and configuration,
download the Getting Started Guide from the Cisco web site,
http://www.cisco.com/go/mx-docs
Never move the camera manually when power is switched on;
always use the camera control function on the Touch controller to
change the camera position.

On our web site you will find an overview of the
worldwide Cisco contacts.
Go to: http://www.cisco.com/go/offices
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Dr.
San Jose, CA 95134 USA

78-101186-01A0 | JUNE 2017 | © 2017 Cisco Systems, Inc. All rights reserved.

8



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Language                        : en-US
Page Count                      : 8
Access Level                    : Customer,Guest,Partner
Secondary Concept               : 
Content Type                    : cisco.com#US#postSales
Auto Play                       : 
Ia Path                         : cisco.com#Products#Cisco Products#Collaboration Endpoints#Collaboration Room Endpoints#Cisco TelePresence MX Series#Cisco TelePresence MX300 G2
Modify Date                     : 2017:11:23 03:24:45-08:00
Entitlement Expression          : contains( "0,1,2,3,4,7" , $profileField[3] )
Title                           : Cisco TelePresence MX300 G2 Wall Mounting Installation Sheet
Secondary Doctype               : 
Doc Type                        : TSD Products Installation Guide
Document Id                     : 1483369956102187
Down Loadable                   : 
View Able                       : 
Producer                        : Adobe PDF Library 15.0; modified using iText 2.1.7 by 1T3XT
Description                     : This document describes how to install the Cisco TelePresence MX300 G2 with a wall mount.
Fire Wall                       : 
Trapped                         : False
Alfresco Doc Version            : 
Creator                         : Adobe InDesign CC 2017 (Windows)
Campaigns                       : 
Country                         : US
Alfresco Trace ID               : 
Topics                          : 
Concept                         : Cisco TelePresence MX300 G2
Date                            : 2017-01-02T07:12:36.226-08:00
Create Date                     : 2017:06:24 10:00:24+02:00

EXIF Metadata provided by EXIF.tools