0433 99 555 D119A Probe Catalog Lr

User Manual: 0433

Open the PDF directly: View PDF .
Page Count: 28

Download
Open PDF In Browser	View PDF

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 1

Eddy Current
Probe Catalog

October 2012

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 2

Eddy Current Probe Catalog

Table of Contents
NDTS Services Provided

What We Can Offer You

Warranty/Handling Shipping Damages Information

Connector Identification Chart

Probe Kits

7-11

Sizing Table

HF Surface Probes

Manual Bolt Hole Probes

Rotating Scanner Probes

15-16

Rotating Scanner Countersink Probes

16-17

LF Spot Probes

LF Ring Probes

Moulded Wheel Probes

20-21

Sliding Probes

Blade Probes

Finger Probes

Spring Loaded Probes

Delrin Surface Probes

Specials

Other Eddy Current Products

Copyright Notice - The contents of this catalog are the property of NDT Solutions, Inc. and EC/NDT LLC. Any redistribution or reproduction of part or
all of the contents in any form is prohibited. ©NDTS All rights reserved.

To order: sales@ndts.com / 715.246.0433
2

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 3

NDTS Services Provided

Eddy Current Probe Catalog

INSPECTION SERVICES
• On-site and in-house inspection services
- MAUS® - FlawInspecta® - C-scan
• Validation of Inspection Processes
• Part validation with Certificate of Conformance
• Inspection of customer provided test specimens

CONSULTING SERVICES
• Development of inspection techniques & processes
• Technical writing of procedures and techniques
• Technology transition program
- Develop - Design - Build - Deliver - Transition
• Procedure streamlining
- Increased Efficiency-Simplified Process-Time Savings
Quick Return on Investment
TRAINING SERVICES
• On-site and off-site training
• ASNT and NAS 410 Level I and Level II training
• MAUS system operation training
• MAUS system maintenance training
• MAUS operator refresher training
• On the job training services
QUICKTURN SERVICE & REPAIR
• MAUS maintenance services
• Equipment calibration services
• Evaluation and repair of MAUS equipment
• MAUS equipment lend/lease program
• MAUS logistical spare program
• MAUS replacement parts
• Equipment upgrade program
• System software updates

The MAUS Automated Inspection System

In-house inspection services

Hands on training, inspection and analysis

CUSTOM SCANNING SOLUTIONS
• Development of custom systems to meet specific
inspection needs
• Custom solution development
- Design - Build - Test - Install - Train - Support
SERVICE AND REPAIR PACKAGES AVAILABLE

To order: sales@ndts.com / 715.246.0433

Customized systems developed for specific
NDT requirements

www.ndts.com

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 4

Eddy Current Probe Catalog

What We Can Offer You

Providing you with quality products in a fast and dependable
manner with the service you deserve and need.
• Competitive Pricing

We will meet or beat any competitor price.

• Our Research and Development Team Work for You

We bring the world of specialty design to your fingertips with our experience and knowledge.
You tell us what you need and we design it.

• We have a large selection of probe kits to choose from

NDT Solutions is committed to our customers satisfaction. We design probe kits to meet our
customers inspection needs and budget requirements.

• We have thousands of probes to choose from

If there is a special probe you are looking for you will find it at NDT Solutions. We are ready to
help you find the exact probe you need to get the job done.

Probe and Cable Repair

Re-Certification of Probes and Standards

• We accept all of our competitors and NDTS/EC-NDT probes and cables for repair.

• Probes and cables which need repairs that are not manufactured by EC/NDT
are replaced with EC/NDT probes and cables at repair probe prices.

• What does this mean for you. You receive a new EC/NDT probe or cable for
half the cost.

• Save up to 50% on the cost of a new/repair.

To order: sales@ndts.com / 715.246.0433
4

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 5

Eddy Current Probe Catalog

Warranty/Handling Shipping Damages Information
Warranty Information

All items manufactured and sold by EC/NDT are under warranty for manufacturing defects.
Wear, damage, material deterioration and other defects caused by improper use by the operator are not covered by warranty.
If, however, the above excluded conditions are related to the manufacturing process, design or materials used the item will be replaced
under warranty. Replaced items will be delivered under full warranty.
A one-year warranty is applicable for all eddy current probes and reference standards. The warranty period for probe repairs is 6 months.
The customer will pay all shipping charges and duties if applicable from their facility to:
NDT Solutions Inc.
10-1 Airport Road
New Richmond, WI 54017-2703
NDT Solutions Inc. will cover the return costs via economical shipping methods to the customer’s facilities. This does not include delays
caused by the shipping company, customs, acts of God, which are unforeseen at time of shipping.

Important Notice - For Your Protection
Under U.S. shipping regulation, damage claims must be collected by the consignee. Do not return merchandise which has been damaged
during the shipping process until after your claim has been established.
The carrier who delivers merchandise to your door is responsible for loss and damages. Acceptance of the shipment by the transportation
company is acknowledgement that the articles received by them were in good condition and properly packed.
All claims for loss or damaged orders should be filed immediately with the transportation company making the delivery to your door. After
you have made your claim please notify NDT Solutions Inc. about the problem.We will mark our records accordingly. Should you need
assistance with the claim, we will be glad to help.

Handling Shipping Damages /Shortages
Visible Damage

• Have delivery person note the damage on freight bill noting the nature and extent of damages.
• Notify the transportation company’s office to inspect the merchandise.
• File claim for damages at once. In filing a claim with the transportation company you can do one of the following:
1. Make a cash adjustment for full value
2. Arrange to have repairs made
3. Replace the merchandise

Concealed Damage

• If damage is noticed when merchandise is unpacked notify transportation company immediately and ask to have it inspected.
• Do not destroy packing materials until shipment is inspected and claim is settled.

Shortages

• All shortages must be reported within 5 days of receiving the order.
• Check the number of cartons delivered with the quantity shown on the receipt.
• If quantities do not match the cartons delivered and the quantity shown on the receipt please have delivery person note the shortage.
If missing items do not show up with in a few days of receiving your shipment please contact NDT Solutions Inc. and we will re-ship
your order.

Important Notice on Returning Goods

• Before returning any goods please contact NDT Solutions Inc.
All returned goods must have a return number, which you will receive after contacting
NDT Solutions. All shipments not having this number will be refused.
Warranty Information

Copyright Notice - The contents of this catalog are the property of NDT Solutions and EC-NDT. Any redistribution or reproduction of
part or all of the contents in any form is prohibited. ©NDTS and EC-NDT. All rights reserved.

To order: sales@ndts.com / 715.246.0433

www.ndts.com

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 6

Eddy Current Probe Catalog

Introduction

Every section in this probe catalog begins with a short description of the different eddy current products available.
This section gives a short description on how to build a probe part number. Each eddy current probe available
from NDTS has a unique code. These codes can be used to order the desired probe configuration. When
ordering always indicate the instrument to be used and the preferred connector type. In the “How to Order” section
of each probe page you will find the correct format to use when building you own probe/part number.
If you have questions or concerns please call NDTS at (715) 246-0433.

Connector Identification Chart

Nortec 1000, 2000 & 500 (16 Pin Lemo)

2 Pin Microdot

M12-21 (4 Pin Fischer)

Triax Lemo

Nortec NDT-18 & 19 (8 Pin Burndy)

8 Pin Fischer/Elotest

Differential Reflection

Phasec 2d & 2200 (12 Pin Lemo)

Locator 2 (7 Pin Lemo)

PS-5 Connector
Microdot

To order: sales@ndts.com / 715.246.0433
6

4 Pin Switchcraft

MAUS Connector
3 Pin Din Defectometer

MIZ-20 & 22 (4 Pin Cannon)

Phasec 1.1 (6 Pin Jaeger)

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 7

Probe Kits

Eddy Current Probe Catalog

NDT Solutions Inc. specializes in making custom probe kits which are designed to meet our customers
needs & specifications. We customize each kit/order to meet all budget requirements.

Reference Standards

• Boeing
• Lockheed
• Airbus
• Pratt & Whitney
• Eddy Current
• Custom EDM Notching
• Re-Certify Old Standards
• Sikorsky
• Bell Helicoptor
• General Electric
• Ultrasonic

Interconnecting Cables & Adapters
• Ultrasonic
• Eddy Current

The Last and Only Probe Kit(s) You Will Ever Need!

• Titanium wear surface option for extended durability and life
• Every size, shape, form and fit probe you will need.
• Certified and calibrated for use on aluminum, steel and titanium. Also available in magnesium,
inconel, stainless steel, etc.
• The highest sensitivity and lowest noise ratio available.
• A multitude of frequency ranges.
• Compatible for all Eddy Current testers

HOW TO ORDER

Order on-line at www.ndts.com.
Please contact NDT Solutions at (715) 246-0433 with your inspection requirements and we will
build a custom probe kit to fit your needs, requirements and budgetary goals.

To order: sales@ndts.com / 715.246.0433

www.ndts.com
7

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 8

Eddy Current Probe Catalog

Probe Kits (continued)
Our Most Popular Probe Kits

The following probe kits are custom probe kits which are most popular with our customers and in the
field of NDT. Each of these kits are designed to meet the needs of our customers and their business.
If you are looking for a specialty kit please give us a call and we would be happy to help you design the
kit which will meet your needs and your budget.

Probe Kit SPCK-363/N2K
(Manual Bolt Hole Kit)
QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Part Type
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Cable

Probe Type
MBAB1-.875
MBAB1-.625
MBAB1-.437
MBAB1-.312
MBAB1-.250
MBAB1-.156
MBAB1-.750
MBAB1-.500
MBAB1-.375
MBAB1-.281
MBAB1-.187
MBAB1-.125
EC-N2K-TL-6
Form Fitted Pelican Kit Box

To order: sales@ndts.com / 715.246.0433
8

Probe Kit SPCK-374

(Universal Scanner Probe Kit)
QTY
1
1
1
1
1
1
1
1
1
1
1

Part Type
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe

Probe Type
SO6R4-.156-.187
SO6R4-.187-.250
SO6R4-.250-.312
SO6R4-.312-.375
SO6R4-.375-.437
SO6R4-.437-.500
SO6R4-.500-.625
SO6R4-.625-.750
SO6R4-.750-.875
SO6R4-.875-.1.00
Form Fitted Pelican Kit Box

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 9

Probe Kits (continued)

Eddy Current Probe Catalog

Probe Kit SPCK-135/N2K

(Surface Eddy Current Probe Kit)
QTY
1
1
1
1
1

Part Type
Probe
Probe
Standard
Cable

Probe Type
PAUB30602FX
PAUB90602FX
ECRS-08245-4/4340
EC-N2K-TL-6
Form Fitted Pelican Kit Box

Probe Kit SPCK-228

(Low Frequency Ring Probe Kit)
QTY
1
1
1
1
1
1
1
1
1
1

Part Type
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Cable
Probe

Probe Type
Coil
SPC-365R-.187
Reflection
SPC-365R-.250
Reflection
SPC-365R-.312
Reflection
SPC-365R-.375
Reflection
SPC-365R-.437
Reflection
SPC-365R-.500
Reflection
SPC-365R-.625
Reflection
SPC-365R-.750
Reflection
EC-RN2K-TL-6
Form Fitted Pelican Kit Box

To order: sales@ndts.com / 715.246.0433

Diameter
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4

Size
4.76mm
6.35mm
7.9mm
9.5mm
11.11mm
12.7mm
15.88mm
19mm

Frequency
100Hz-10KHz
100Hz-10KHz
100Hz-10KHz
100Hz-10KHz
100Hz-10KHz
100Hz-10KHz
100Hz-10KHz
100Hz-10KHz

www.ndts.com
9

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 10

Eddy Current Probe Catalog

Probe Kits (continued)
Probe Kit SPCK-367/N2K

(This is a General Purpose Surface Probe Kit)
QTY
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Part Type
Cable
Cable
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe

Probe Type
EC-N2K-TL-6
EC-RN2K-TL-6
PAB0080FX
PAB90602
PAB90601
PABM90402/.072
PAB0050
PAB45605
PAB90605
PAB90602FX
PAB90602FX
PAB0080FX
PAB90602
PAB90601
PABM90402/.072
PAB0050
PAB45605
PAB90605
SO6R2-.750-5FX
SO6R2-.687-5FX
SO6R2-.625-5FX
SO6R2-.562-5FX
SO6R2-.500-5FX
SO6R2-.437-5FX
SO6R2-.375-5FX
SO6R2-.312-5FX
SO6R2-.250-5FX
SO6R2-.750-5FX
SO6R2-.687-5FX
SO6R2-.625-5FX
SO6R2-.562-5FX
SO6R2-.500-5FX
SO6R2-.437-5FX
SO6R2-.375-5FX
SO6R2-.312-5FX
SO6R2-.250-5FX

Frequency

1
1
1

Form Fitted Pelican Kit Box
Scanner Probe SO6R4-.750
100KHz-1MHz
Scanner Probe SO6R4-.687
100KHz-1MHz
Scanner Probe SO6R4-.625
100KHz-1MHz

50-500KHz
50-500KHz
50-500KHz
50-500KHz
50-500KHz
50-500KHz
50-500KHz
50-500KHz
500KHz-2MHz
500KHz-2MHz
500KHz-2MHz
500KHz-2MHz
500KHz-2MHz
500KHz-2MHz
500KHz-2MHz
500KHz-2MHz
100KHz-1MHz
100KHz-1MHz
100KHz-1MHz
100KHz-1MHz
100KHz-1MHz
100KHz-1MHz
100KHz-1MHz
100KHz-1MHz
100KHz-1MHz
500KHz-2MHz
500KHz-2MHz
500KHz-2MHz
500KHz-2MHz
500KHz-2MHz
500KHz-2MHz
500KHz-2MHz
500KHz-2MHz
500KHz-2MHz

Probe Kit SPCK-367/N2K (continued)
(This is a General Purpose Surface Probe Kit)

To order: sales@ndts.com / 715.246.0433
10

QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Part Type
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Scanner Probe
Probe
Spot Probe
Spot Probe
Spot Probe
Spot Probe
Standard
Standard
Standard

Probe Type
Frequency
SO6R4-.562
100KHz-1MHz
SO6R4-.500
100KHz-1MHz
SO6R4-.437
100KHz-1MHz
SO6R4-.375
100KHz-1MHz
SO6R4-.312
100KHz-1MHz
SO6R4-.250
100KHz-1MHz
SO6R4-.750
500KHz-2MHz
SO6R4-.687
500KHz-2MHz
SO6R4-.625
500KHz-2MHz
SO6R4-.562
500KHz-2MHz
SO6R4-.500
500KHz-2MHz
SO6R4-.437
500KHz-2MHz
SO6R4-.375
500KHz-2MHz
SO6R4-.312
500KHz-2MHz
SO6R4-.250
500KHz-2MHz
PAR16-90605
1-20KHz
LFSR-.500/TM
200Hz-2KHz
LFSR-.437/TM
500Hz-5KHz
LFSR-.310/TM
1-50KHz
LFSR-.250/TM
1-50KHz
ECRS-0824/AL
ECRS-0824/Ti
ECRS-0824-S4/4340

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 11

Probe Kits (continued)
Probe Kit SPCK-229
(Manual Bolt Hole Kit)

QTY
Part Type Probe Type
Size
1
Probe
MBA1-10
5/32”
1
Probe
MBA1-12
3/16”
1
Probe
MBA1-14
7/32”
1
Probe
MBA1-16
1/4”
1
Probe
MBA1-18
9/32”
1
Probe
MBA1-20
5/16”
1
Probe
MBA1-22
11/32”
1
Probe
MBA1-24
3/8”
1
Probe
MBA1-26
13/32”
1
Probe
MBA1-28
7/16”
1
Probe
MBA1-30
15/32”
1
Probe
MBA1-32
1/2”
1
Probe
MBA1-34
17/32”
1
Probe
MBA1-36
9/16”
1
Probe
MBA1-38
19/32”
1
Probe
MBA1-40
5/8”
1
Probe
MBA1-42
21/32”
1
Probe
MBA1-44
11/16”
1
Probe
MBA1-46
23/32”
1
Probe
MBA1-48
3/4”
1
Probe
MBA1-50
25/32”
1
Probe
MBA1-52
13/16”
1
Probe
MBA1-54
27/32”
1
Probe
MBA1-56
7/8”
1
Probe
MBA1-58
29/32”
1
Probe
MBA1-60
15/16”
1
Probe
MBA1-62
31/32”
1
Probe
MBA1-64
1”
1
Form Fitted Pelican Kit Box
Add “1” for Universal Bolt Hole Probe Kit
Add “IRA” for RA Scanner Bolt Hole Probe Kit

Eddy Current Probe Catalog
Probe Kit SPCK-218

(General Purpose Surface Probe Kit)
QTY
1
1
1
1
1
1
1
1
1
1
1

Part Type
Probe
Probe
Probe
Probe
Probe
Probe
Ref. Std.
Ref. Std.
Ref. Std.
Cable

Probe Type
PAB0060/AL (50-500K)
PAB90505/AL (50-500K)
PAB90505/Ti (1-3 MHz)
PAB90305/AL (50-500)
PAB0030/Ti (1-3MHz)
PAB0020/AL (50-500K)
ECRS-0824/AL
ECRS-0824/Ti
ECRS-0824/MAG
EC-N2K-TL-6
Form Fitted Pelican Kit Box

Probe Kit SPCK-330

(General Purpose Surface Probe Kit)
QTY
1
1
1
1
1
1
1
1
1
1
1

Part Type
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Probe
Cable
Ref. Std.

Probe Type
PAB0040
PAB0080FX
PAB90605
PAB90602
PAB90C601
PAB45502
PAB90605FX
PAB90802FX
EC-N2K-TL-6
ECRS-0824/AL
Form Fitted Pelican Kit Box

(Kit pictures unavailable at this time)

HOW TO ORDER

Order on-line at www.ndts.com.
Please contact NDT Solutions at (715) 246-0433 with your inspection requirements and we will build a
custom probe kit to fit your needs, requirements and budgetary goals.

To order: sales@ndts.com / 715.246.0433

www.ndts.com
11

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 12

Eddy Current Probe Catalog

Sizing Table
Size
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32

Fraction
1/64
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2

Decimals
.0156
.0312
.0468
.0626
.0781
.0937
.1093
.125
.1406
.1562
.1718
.1875
.2031
.2187
.2343
.250
.2656
.2812
.2968
.3125
.3281
.3437
.3593
.375
.3906
.4062
.4218
.4375
.4531
.4687
.4843
.500

Millimeters
0.396
0.793
1.190
1.587
1.984
2.381
2.778
3.175
3.571
3.968
4.365
4.762
5.159
5.556
5.953
6.350
6.746
7.143
7.540
7.937
8.334
8.731
9.128
9.525
9.921
10.318
10.715
11.112
11.509
11.906
12.303
12.700

To order: sales@ndts.com / 715.246.0433
12

Size
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64

Fraction
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
1

Decimals
.5156
.5312
.5468
.5626
.5781
.5937
.6093
.625
.6406
.6562
.6718
.6875
.7031
.7187
.7343
.750
.7556
.7812
.7968
.8125
.8281
.8437
.8593
.875
.8906
.9062
.9218
.9375
.9531
.9687
.9843
1.000

Millimeters
13.096
13.493
13.890
14.287
14.684
15.081
15.478
15.875
16.271
16.668
17.065
17.462
17.859
18.256
18.653
19.050
19.446
19.843
20.240
20.637
21.034
21.431
21.828
22.225
22.621
23.018
23.415
23.812
24.209
24.606
25.003
25.4

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 13

Eddy Current Probe Catalog

HF Surface Probes

High frequency surface probes are available in various shielded or unshielded designs and frequencies.
These probes are commonly used for surface crack detection.

Probe Configuration
45 Degree

90 Degree

Straight

1. Probe Type

Shielded
Absolute Bridge, Quick Disconnect
For unshielded add U to part number
E.g. Absolute Unshielded
Defectometer (Ferrous)
Defectometer (Non-Ferrous)
Defectometer (Non-Ferrous Shielded)

2. Probe Tip Diameter

P
PAB
PAU
PDF
PDN
PDNS

5. Bend at Handle Angle
Crank

Straight (Default)
Bend (At Handle)
Crank (1” from Coil End Side)

6. Length (WL)

Differential
Reflection
Absolute
Absolute Bridge
Absolute Reflection
Bridge Differential

D
R
A
AB
AR
BD

Straight
45 Degrees
Right Angle

00
45
90

4. Angle

B
C

Probe length is 0.1” from handle end to shaft coil end

7. Probe Drop

Default diameter of HF probes = 0.125
For an unshielded Mini Tip the diameter is from .035 to .072
For a shielded Mini Tip the diameter is from .072 to .125
Add M to front of part # and /0.00 for the diameter you
request at the end of part number

3. Coil

Bend

8. Shaft
Stainless (Default)
Copper (Flexible)

9. Frequency

0.100”
0.200”
0.300”
0.400”
0.500”
0.600”
0.700”
Custom Drop

Probe frequency, either fixed or range 50-500KHz
(Default) 200KHz (Center Frequency)
500KHz - 1MHz, 1-3MHz

10. Protective Tip

Protects the wear on the coil - add TT at end of part #

HOW TO ORDER

Order on-line at www.ndts.com. Construct your part number as described in this section, or contact
NDTS at (715) 246-0433 with a description of your desired probe configuration.
1.Probe 2.Probe Tip 3. Coil 4. Angle 5. Bend at 6. Length 7. Drop 8. Shaft 9. Frequency 10. Protective
Type
Diameter
Handle
Tip

For Example: A shielded surface probe, with an absolute bridge, 90 degrees, cranked, 6 inches long, drops .4 and is copper
- the Part # would be: PAB90C604FX

To order: sales@ndts.com / 715.246.0433

www.ndts.com
13

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 14

Eddy Current Probe Catalog

Manual Bolt Hole Probes

These probes are used for manual testing of bolt holes.

Probe Configuration
1. Probe Type

Manual Bolt Hole Probe
MB
Defectometer Ferrous
MBDF
Defectometer Non-Ferrous Unshielded MBDN
Defectometer Non-Ferrous Shielded MDDNS
4. Diameter (Head Size)

2. Coil
Differential - Quick Disconnect
Reflection
Absolute
Absolute Bridge - Quick Disconnect
Absolute Reflection
Bridge Differential

D
R
A
AB
AR
BD

Default in inches, see Table 1
For metric add M to end of part #
5. Frequency
Default frequency is 100 kHz - 1 MHz
Provide frequency range or desired frequency

3. Probe Shape

6. Working Length (WL)

Split End (Single Sized)
1
Self Expanding (Spread)
2
Screw Adjustable (Spread)
3
Add S to number if depth gage is used Collar default length is 1”

Default = 2 inches or in case of metric = 50mm
Indicate required length if not default in inches
or mm, length measured from probe end to coil

HOW TO ORDER

Order on-line at www.ndts.com. Construct your part number as described in this section, or contact
NDTS at (715) 246-0433 with a description of your desired probe configuration.
1.Probe Type

2.Coil

3. Probe Shape

4. Diameter

/ 5. Frequency

6. Working Length

Metric

For Example: A manual bolt hole probe, differential, split end, .156 head size, 3 inches, the part # would be: MBD1-.156/3WL
Example #2: A manual bolt hole probe, absolute, split end, with a diameter of .156, and 3 inches working length, the part #
would be: MBA1-.156/3WL

To order: sales@ndts.com / 715.246.0433
14

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 15

Rotating Scanner Probes

Eddy Current Probe Catalog

Scanner probes are eddy current probes used in combination with an automated rotator, which is attached
to an eddy current instrument. High speed testing of bolt holes, counter bores, the hole perimeter or around
fasteners heads are a typical application for these types of probes. Several designs and materials are
possible depending on the application the probes are used in. EC/NDT has many different designs available
for all rotating guns on the market. If a standard design does not fit your application we will manufacture
a probe according to your specifications/requirements.

Rotating Scanner Bolt Hole Probes
Bolt hole probes are used to scan the inside of a bore for cracks. Many different designs and coil types
are available to meet your inspection requirements.
3. Scanner Model
45 Degree

Solid
Screw Adjustable
Split End
Self Expanding

Collar Adjustable

Probe Configuration

2. Equipment Manufacturer
Nortec
Zetec
Physical Acoustic
Rohmann
Foerster
Hocking
Uniwest
Gulton

0
1
2
4
5
0
0
0
1
0
1
1
0
0
1

Differential
Reflection
Absolute
Absolute Reflection
Absolute Bridge

D
R
A
AR
AB

4. Coil

1. Probe Type

Rechii Scanner Probe (Plastic Design)
Stainless Steel Scanner Probe
For unshielded design of above probes,
add U
For flexible shaft design probes,
add FX

Nortec RA
Nortec RA2
Nortec PS2/3
Nortec PS4
Nortec PS5
Zetec Standard
Physical Acoustics Standard
Rohmann Standard
Rohmann Mini
Foerster
Foerster
Hocking Mini
Uniwest Standard
Gulton Standard
Universal Mini

S
SS
SU, SSU
SFX,
SUFX, etc.

0
1
2
3
4
5
6
7

To order: sales@ndts.com / 715.246.0433

Default Coil Types Are:
Nortec PS2/3
Nortec RA, RA2, PS4, PS5
Zetec Default
Physical Acoustics Default
Rohmann Default
Foerster Default
Hocking Default
Uniwest Default
Gulton Default
Universal

Differential
Reflection
Differential
Differential
Reflection
Reflection
Reflection
Differential
Absolute
Reflection

www.ndts.com
15

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 16

Eddy Current Probe Catalog

Rotating Scanner Probes (continued)
5. Probe Model

7. Working Length (WL)

Perimeter Probes
Fastener Head Probes
Solid
Split End
Self Expanding
Screw Adjustable
Collar Adjustable Shaft

Default = 2 inches or in case of metric = 50mm
Indicate required length if not default in inches or mm

HP
FP
0
1
2
3
4

6. Diameter

8. Frequency
Probe frequency, either fixed or range

Default in inches, see Table 1
For metric add M to end of part #
In case of fixed diameter e.g. S100/16
In case of diameter range e.g. S102/16-20

HOW TO ORDER

4. Coil

5. Probe / 6. Diameter
Model

7. Working
Length

/ 8. Frequency

For metric sizes add M to end of part #
For Example: A Rechii Scanner Probe, Lemo 1/2 moon connector, Refl., Collar Adjustable Shaft, the part # would be: S00R4

Rotating Scanner Countersink Probes
Scanner countersink probes are used to scan the countersink area of a bore for cracks. Many different
designs and coil types are available to meet your inspection requirements.
2. Equipment Manufacturer

Probe Configuration
1. Probe Type

Scanner Probe (Plastic Design)
Stainless Steel Scanner Probe
For unshielded design of above
probes, add U
For flexible shaft design probes,
add FX

SC
SSC
SCU, SSCU
SCFX,
SCUFX, etc.

To order: sales@ndts.com / 715.246.0433
16

Nortec
Zetec
Physical Acoustic
Rohmann
Foerster
Hocking
Uniwest
Gulton
Universal

0
1
2
3
4
5
6
7
8

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 17

Eddy Current Probe Catalog

Rotating Scanner Countersink Probes (continued)
3. Scanner Model

Nortec RA
Nortec RA2
Nortec PS2/3
Nortec PS4
Nortec PS5
Zetec Standard
Physical Acoustics Standard
Rohmann Standard
Rohmann Mini
Foerster Standard
Foerster Mini
Hocking Mini
Uniwest Standard
Gulton Standard
Universal Mini

Default Coil Types Are:

0
1
2
4
5
0
0
0
1
0
1
1
0
0
1

Nortec PS2/3
Nortec RA, RA2, PS4, PS5
Zetec Default
Physical Acoustics Default
Rohmann Default
Foerster Default
Hocking Default
Uniwest Default
Gulton Default
Universal
5. Angle
Standard (Degrees)

100

6. Diameter

4. Coil
Differential
Reflection
Absolute
Absolute Reflection
Absolute Bridge

Differential
Reflection
Differential
Differential
Reflection
Reflection
Reflection
Differential
Absolute
Reflection

Default in inches, see Table 1
For metric add M to end of part #

D
R
A
AR
AB

7. Working Length (WL)
Default = 2 inches or in case of metric = 50mm
Indicate required length if not default in inches
or mm
8. Frequency
Probe frequency, either fixed or range

HOW TO ORDER

4. Coil

5. Angle

/ 6. Diameter

7. Working
Length

/ 8. Frequency

For metric sizes add M to end of part #
For Example: A Nortec equipment with a Universal Scanner Gun, the part # would be: SC01R100-.312

To order: sales@ndts.com / 715.246.0433

www.ndts.com

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 18

Eddy Current Probe Catalog

LF Spot Probes

The LF Spot Probes are general purpose probes for most applications. They are used for sub-surface
defect detection, fatigue cracks, and metal thinning due to corrosion.

Probe Configuration
1. Probe Type

LF Spot Probe

2. Connector Location
Side Connection (Default)
Top Mount

S
T

5. Metric

3. Coil

When diameter in metric add M

Differential
Reflection
Bridge Differential
Absolute
Absolute Bridge

D
R
BD
A
AB

6. Connector
Lemo Quick Disconnect (Default)
Other connectors available upon request

4. Diameter

7. Frequency

Diameter of probe is 0.1” or when metric in mm

Provide frequency range or desired frequency

HOW TO ORDER

Order on-line at www.ndts.com. Construct your part number as described in this section, or contact
NDTS at (715) 246-0433 with a description of your desired probe configuration.
1.Probe
Type

2.Connector
Location

3. Coil

4. Diameter

5. Metric

6. Connector

For Example: A LF Spot Probe with a top mount, absolute bridge. The part # would be: LFTAB-.54

To order: sales@ndts.com / 715.246.0433
18

7. Frequency

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 19

Eddy Current Probe Catalog

LF Ring Probes

The Ring Probes are used for crack detection around installed fastener heads. These probes are made
to fit various fastener head diameters.

Probe Configuration
1. Probe Type

LF Ring Probe

2. Coil
Differential
Reflection
Bridge Differential
Absolute
Absolute Bridge

D
R
BD
A
AB

6. Connector

3. Connector Location
Side Mounted (Default)
Top Mount

Lemo Quick Disconnect (Default)
Other connectors available upon request
S
T

7. Frequency

4. ID-OD

Provide frequency range or desired frequency
8. Material

Add desired diameters, default in inches
5. Metric

Aluminum
Steal
Titanium

When diameter in metric add M

HOW TO ORDER

Order on-line at www.ndts.com. Construct your part number as described in this section, or contact
NDTS at (715) 246-0433 with a description of your desired probe configuration.
1.Probe
Type

2.Coil

3. Connector
Location

4. ID-OD

5. Metric

6. Connector

7. Frequency

8. Material

(For Example: A LF Ring Probe, Reflection, Top Mount. The part # would be: LFRT)

To order: sales@ndts.com / 715.246.0433

www.ndts.com

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 20

Eddy Current Probe Catalog

Moulded Wheel Probes and Wheel Standards
These probes are designed to scan complex shapes and maintain good contact to surface on large areas.
These probes are, for example, used to scan the bead seat area of aircraft wheels. Complete aircraft
wheel inspection kits are available for many different aircraft types. All other special design moulded probes
will be coded as a special. See section “Special Probes” for more detailed information.
3. Aircraft Type

SPCK-214/T1
T1 Wheel Probe Kit Nose and Main

Wheel Probe Configuration
1. Probe Type

Wheel Probe
Wheel Standard

WP
SS

2. Location

Indicate aircraft manufacturer’s code, if not
available contact NDT Solutions, Inc.
Aerospatial (ATR-1)
E
Airbus
A
Boeing
B
Bombardier
O
British Aerospace
BA
Cessna
C
Dehavilland
D
Embraer
M
Fokker
F
Gulfstream
G
Lockheed
L
McDonnell Douglas
MD
Northrop
C
Pilatus
P
Saab
S
4. Aircraft Type Indication
The aircraft type indication e.g., Dash 8, 737, MD80

Main
Nose
Kit (Kit includes all probes and
reference standards needed for
aircraft type)

M
N
K

5. Connector
Lemo Quick Disconnect (Default)
Other connectors available upon request

HOW TO ORDER

Order on-line at www.ndts.com. Construct your part number as described in this section, or contact
NDTS at (715) 246-0433 with a description of your desired probe configuration.
1.Probe Shape

2.Location

3. Aircraft Type

4. Aircraft Type Indication

For Example: A Moulded Wheel Probe for the nose of a Boeing aircraft. The part # would be: WPN-B737

To order: sales@ndts.com / 715.246.0433
20

5. Connector

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 21

Eddy Current Probe Catalog

Moulded Wheel Probes and Wheel Standards (continued)
The following are examples of wheel probes and wheel standards which we build. However, there are
many different types of aircraft. It is important to know we design wheel probes and wheel standards for
all current aircraft. If there is an aircraft you are looking for but do not see it on this list please contact
us at (715) 246-0433 or through our website at sales@ndts.com. We would be happy to assist you with
your specific request.
Aircraft
B-717
B-727
B-737
B-747
B-757
B-767
A-320
DC-9
DC-10
MD-80
Dash 8
KC-135
B-52
F-15C, D
F-15E
F-16
A-6
A-10
UH-60
B-717
KC-135/CB
Carbon Brake
H46-2/CB
Carbon Brake

Wheel Probe
Placement - Main

Wheel Probe
Placement - Nose

Wheel Standard
Placement - Main

Wheel Standard
Placement - Nose

WPM-B717
WPM-B727
WPM-B737
WPM-B747
WPM-B757
WPM-B767
WPM-A320
WPM-DC9
WPM-DC10
WPM-MD80
WPM-Dash8
WPM-KC135
WPM-B52
WPM-F15CD
WPM-F15E
WPM-F16
WPM-A6
WPM-A10
WPM-UH60
WPM-B717
WPM-KC135/CB

WPN-B717
WPN-B727
WPN-B737
WPN-B747
WPN-B757
WPN-B767
WPN-A320
WPN-DC9
WPN-DC10
WPN-MD80
WPN-Dash8
WPN-KC135
WPN-B52
WPN-F15CD
WPN-F15E
WPN-F16
WPN-A6
WPN-A10
WPN-UH60
WPN-B717
WPN-KC135/CB

WSM-B717
WSM-B727
WSM-B737
WSM-B747
WSM-B757
WSM-B767
WSM-A320
WSM-DC9
WSM-DC10
WSM-MD80
WSM-Dash8
WSM-KC135
WSM-B52
WSM-F15CD
WSM-F15E
WSM-F16
WSM-A6
WSM-A10
WSM-UH60
WSM-B717
WSM-KC135/CB

WSN-B717
WSN-B727
WSN-B737
WSN-B747
WSN-B757
WSN-B767
WSN-A320
WSN-DC9
WSN-DC10
WSN-MD80
WSN-Dash8
WSN-KC135
WSN-B52
WSN-F15CD
WSN-F15E
WSN-F16
WSN-A6
WSN-A10
WSN-UH60
WSN-B717
WSN-KC135/CB

WPM-H462/CB

WPN-H462/CB

WSM-H462/CB

WSN-H462/CB

It is helpful when building a wheel probe and/or reference standard, for our specialists to have a sample
of the wheel you will be using the probe and standard on. If you have a sample please indicate that on
your order or tell one of our representatives when placing your order. Thank you.

To order: sales@ndts.com / 715.246.0433

www.ndts.com

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 22

Eddy Current Probe Catalog

Sliding Probes

Sliding probes provide an easy and quick method of scanning smooth surfaces to detect surface and
subsurface cracks. These probes are mostly used to scan fastener rows. Probes can be designed to meet
your specific inspection requirements.

Probe Configuration
1. Probe Type
Probe Type

2. Shape
Fixed Size
Adjustable Size
Wheel Adjustable

F
A
WA

5. Metric
When ID and OD in metric add M

3. Length

6. Connector

Length of probe, in case of adjustable sliding
probes the minimum size

Lemo Quick Disconnect (Default)
Other connectors available upon request

4. Width
Fixed Size
Adjustable Size
Wheel Adjustable

7. Frequency

F
A
WA

Add frequency range or desired frequency

HOW TO ORDER

Order on-line at www.ndts.com. Construct your part number as described in this section, or contact
NDTS at (715) 246-0433 with a description of your desired probe configuration.
1.Probe Type

2.Shape

3. Length

4. Width

5. Metric

6. Connector

For Example: A Sliding Probe, fixed size, 2 inches long, fixed width. The part # would be: GPF-2F

To order: sales@ndts.com / 715.246.0433
22

7. Frequency

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 23

Eddy Current Probe Catalog

Blade Probes

Blade probes provide an easy access in narrow slots or gaps between structures detect surface anomalies.
Both sides of the probe are sensitive for defects.

Probe Configuration
1. Probe Type

Shielded Blade Probe
BL
For unshielded add U to part #
BLAU
e.g. Absolute Unshielded
Defectometer (Ferrous)
BLDF
Defectometer (Non-Ferrous)
BLDN
Defectometer (Non-Ferrous Shielded) BLDNS
For side mounded coil, change BL into BLS
2. Coil

5. Working Length (WL)

Differential
Reflection
Absolute
Absolute Reflection
Absolute Bridge

D
R
A
AR
AB

Default = 2 inches or in case of metric = 50mm
Indicate required length if not default in inches
or mm
6. Connector

3. Angle

Default connector is Tri-Axial Fischer

7. Frequency

Straight
00
30 Degrees, etc.
30
Right Angle or Indicate Desired Angle 90

Add frequency range or desired frequency

4. Thickness (T)
3 Standard Thickness’s are available:
0.8”, 0.06”, 0.04”

HOW TO ORDER

Order on-line at www.ndts.com. Construct your part number as described in this section, or contact
NDTS at (715) 246-0433 with a description of your desired probe configuration.
1.Probe Type

2.Coil

3. Angle

4. Thickness4

5. Working Length

6. Connector

7. Frequency

For Example: A shielded blade probe, absolute bridge, straight, with .08” thickness. The part # would be: BLAB00-.08

To order: sales@ndts.com / 715.246.0433

www.ndts.com

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 24

Eddy Current Probe Catalog

Finger Probes

Finger probes are surface probes that can be handled by sliding a finger in the handle. This gives the
possibility to scan areas that are difficult to access and remain in good contact with the surface.

Probe Configuration
1. Probe Type

Finger Probe Straight

Finger Probe Shielded
FSPFSP
For unshielded add U to part #
FSPAU
e.g. Absolute Unshielded
Defectometer (Ferrous)
FSPDF
Defectometer (Non-Ferrous)
FSPDN
Defectometer (Non-Ferrous Shielded) FSPDNS
2. Coil
Differential
Reflection
Absolute
Absolute Reflection
Absolute Bridge

D
R
A
AR
AB

Finger Probe Angle

4. Drop or Working Length
In terms of drop
In terms of length

0.1D
1.0D

5. Connector
Microdot (Default)
Indicate connector type if not default

3. Angle
Straight
30 Degrees, etc.
Right Angle

00
30
90

6. Frequency
Add frequency range or desired frequency

HOW TO ORDER

Order on-line at www.ndts.com. Construct your part number as described in this section, or contact
NDTS at (715) 246-0433 with a description of your desired probe configuration.
1.Probe Type

2.Coil

3. Angle

4. Drop

5. Connector

6. Frequency

For Example: A finger probe, absolute bridge, straight, with .1 drop. The part # would be: FSPFSPAB00-.01

To order: sales@ndts.com / 715.246.0433
24

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 25

Eddy Current Probe Catalog

Spring Loaded Probes

Spring loaded probes are used when a constant pressure of the probe on the surface is required. This will
give a high repeatability of your inspection.

Probe Configuration

Length

1. Probe Type

Spring Loaded Probe

Diameter

SLP

2. Coil

Differential
Reflection
Absolute
Absolute Bridge

D
R
A
AB

3. Diameter

5. Metric
If diameter and length are provided in metric add M

6. Connector

Lemo Quick Disconnect (Default)
Other connectors available upon request

Diameter of surface area

4. Length

7. Frequency

Length of holder

Add frequency range or desired frequency

1.Probe Type

2.Coil

3. Diameter

4. Length

5. Metric

6. Connector

7. Frequency

For Example: A spring loaded probe, absolute bridge, with a diameter of .025 and a length of two inches. The part #
would be SLPAB.0252

Delrin Surface Probes

Unshielded “pencil” type probe for surface crack detection.

Probe Configuration
1. Probe Type

Tip Diameter 1/4”
Tip Diameter 1/8”

DSS
DSM

2. Coil

4. Metric
If diameter and length are provided in metric add M

Differential
Reflection
Absolute
Absolute Bridge
Absolute Reflection

5. Connector

D
R
A
AB
AR

3. Length

Lemo Quick Disconnect (Default)
Other connectors available upon request

6. Frequency

Add frequency range or desired frequency

Length of holder, default in inches
1.Probe Type

2.Coil

3. Length

4. Metric

5. Connector

6. Frequency

For Example: A delrin surface probe with a tip diameter of 1/4”, absolute bridge, two inches long. The part # would be DSSAB2

To order: sales@ndts.com / 715.246.0433

www.ndts.com

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:40 PM Page 26

Eddy Current Probe Catalog

Specials

Specially designed probes are available for all your applications. Since the design meets a special
requirement the probe identification will be given by NDT Solutions, Inc. and EC/NDT.

Probe Configuration
1. Probe Type
Special

SPC

2. Number
Scanning Probes
Manual Bolt Hole Probes
HF Surface Probes
LF Spot Probes
LF Ring Probes
Sliding Probes
Moulded Probes
Spring Loaded Probes
Finger Probes
Delrin Probes
Blade probes

1
2
3
4
5
6
7
8
9
10
11

3. Connector

4. Drawing Index

Lemo Quick Disconnect (Default)
Tri Axial Fischer
Microdot
2 Pin Microdot
4 Pin Fisher for Reflection Elotest Type

Added for internal administrative purposes
TF
M
2P
4F

5. Frequency

HOW TO ORDER

Frequency range or desired frequency

Order on-line at www.ndts.com. Contact NDT Solutions at (715) 246-0433 for help constructing your
part number. Have your inspection requirements ready and we will help construct a part number to fit
your needs and budgetary goals.

To order: sales@ndts.com / 715.246.0433
26

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:41 PM Page 27

Eddy Current Probe Catalog

Other Eddy Current Products

NDT Solutions, Inc. is a leading provider of Eddy Current testing equipment for applications requiring surface
and sub-surface crack detection, metal sorting, coating thickness and conductivity measurements.
The hand-held design allows true single hand operation, leaving the operator free to use their other hand
to scan with a probe. The specifications and features will appeal to users in aerospace, offshore oil,
petrochemical, power generation and rail/axle industries.

ETi Series - 100 & 200
Eddy Current Flaw Detector
System Features

• Ability to multiplex four frequencies per channel; meaning up to eight
probes can be used at any one time
• Uses Linux based software and has an EThernet connector for
connection to the client’s local network
• SD storage card on board and USB capability for further data storage
• Housed in a rugged, single piece cast aluminum chassis and is compact
to aid usability

SigmaCheck

Eddy Current Conductivity Meter
System Features

• Easy to use
• Lightweight (350g) and ergonomically designed for comfort in the hand
• Choice of five frequencies _ 60, 120, 240, 480, 960kHz
• Rapid display of conductivity results
• Field exchangeable probes via SD card
• USB PC connectivity for remote control and data logging
• Comes in a moulded UL94-5VA flame retardent ABS case

Vantage

Eddy Current Flaw Detector

System Features

• Perfectly balanced for comfortable single-handed operation
• Lightweight (1.8 lbs.) with rugged housing
• Automatic lift-off setting
• Separate connector for Absolute and Reflection / Bridge Probes
• 3.5” easy to read, bright, high-resolution (115 DPI/0.22mm pixel) display
• PC-based analysis and reporting utility software for easy analysis and
reporting included with the instrument
Individual detailed brochures are available upon request

To order: sales@ndts.com / 715.246.0433

www.ndts.com

99-555-D119A Probe catalogMASTER 62212_Layout 1 10/12/2012 2:41 PM Page 28

Eddy Current Probe Catalog

NDTS Product Line
MAUS
AUTOMATED
INSPECTION
SYSTEM

VARIABLE
AUTOMATIC
COUPLANT AND
RECOVERY SYSTEM

DR11
DOUBLE REVERSE
SCANNING ARM

Diagnostic Sonar Ltd.
FLAWINSPECTA®
HIGH SPEED
ULTRASONIC ARRAY SYSTEM

EDDY CURRENT TESTING EQUIPMENT

NSPECT 210 ROBOTIC
NON-DESTRUCTIVE INSPECTION SYSTEM

SSEC III
REMOTE FIELD
EDDY CURRENT INSTRUMENT

UT COUPLANTS

UT TRANSDUCERS

NON DESTRUCTIVE TESTING SOLUTIONS, INC

NDT Solutions, Inc.
10-1 Airport Rd. • New Richmond, WI 54017-2703
Tel: 715.246.0433 • Fax: 715.246.0466 • Email: sales@ndts.com

www.ndts.com

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : 3.1-702
Create Date                     : 2012:10:12 14:40:21-06:00
Creator Tool                    : QuarkXPress(R) 9.3
Modify Date                     : 2012:10:15 09:48:28-05:00
Metadata Date                   : 2012:10:15 09:48:28-05:00
Producer                        : QuarkXPress(R) 9.3
Format                          : application/pdf
Title                           : Layout 1
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments
Document ID                     : uuid:9018bf6d-31f8-4267-bdf8-8b85a71f6afc
Instance ID                     : uuid:afe5c91e-093e-4219-90c0-6fee476471ba
Page Count                      : 28
Creator                         : QuarkXPress(R) 9.3

EXIF Metadata provided by EXIF.tools

0433 99 555 D119A Probe Catalog Lr

Navigation menu

Versions of this User Manual:

Views

Navigation