INDC260IG DC260_installation_guide DC260 Installation Guide
User Manual: DC260_installation_guide
Open the PDF directly: View PDF 
.
Page Count: 6
| Download | |
| Open PDF In Browser | View PDF |
Unit 1, AMC Business Park t : 0208 621 6210 12 Cumberland Avenue e : sales@doorentrydirect.com Park Royal, London, NW10 7QL w : www.doorentrydirect.com Installation Guide DC260 - stand alone access control unit for 2000 users 1 Locating the control unit 2 Connecting the reader The DC260 control unit should be fitted close to the door through which you wish to control access. It should be on the secure side. When programming the unit, you will need access to both the reader and controller, therefore you should arrange them reasonably close together. The DC260 can control access both in and out of the controlled door when using the built-in "EXIT" reader with the external UPR reader. The distance between the UPR reader and the controller can be extended up to 25 meters using BEL9536 cable or equivalent. N/C Orange COM Purple N/O Blue Yellow (Tone) Blue (LED) Black GND Black Red +12V DC Red Brown D_IN Yellow OPEN Grey ALARM White D1 White Green D0 Green OUT - built-in "EXIT" reader IN - external UPR reader 3 Egress button Pressing the egress button (push to make switch) will operate the door opening timer. The timer starts when the button is pressed and released, a time clock may be used for real time door unlocking. N/C Orange COM Purple N/O Blue Black GND Common Red +12V DC Brown D_IN Yellow OPEN Grey ALARM White D1 Green D0 Push to brake Push to make 4 Locking Devices The lock release should match the supply input and have lock suppressor connected directly across its terminals (as shown & supplied). Locking - Fail locked N/C Orange COM Purple N/O Blue Black GND Red +12V DC Brown D_IN Yellow OPEN Grey ALARM White D1 Green D0 Locking - Fail unlocked N/C Orange COM Purple N/O Blue Black GND Red +12V DC Brown D_IN Yellow OPEN Grey ALARM White D1 Green D0 5 Break Glass If the controlled door is on a fire escape route, you should fit fail safe locking devices and a breaking glass unit for emergency exit N/C Orange COM Purple N/O Blue Black GND Red +12V DC Brown D_IN Yellow OPEN Grey ALARM White D1 Green D0 N/O COM N/C N/O COM N/C Note: Use second POLE if available 6 Power Supply With no locks connected, DC260 Access Control Unit power consumption is 12V DC 25mA (quiescent ) and 60mA (operating). Maximum power available for lock (from power supply provided) is 12V DC 1A (continuous). Maximum lock relay contact rating is 24V DC 2A. N/C Orange COM Purple N/O Blue Black GND Red +12V DC Brown D_IN Yellow OPEN Grey ALARM White D1 Green D0 7 Door Monitor Door monitor contact input, if fitted will re-lock the door 2 seconds after door opens. A monitored release or lock may be used in place of the door contact. N/C Orange COM Purple N/O Blue Black GND Red +12V DC Brown D_IN Yellow OPEN Grey ALARM White D1 Green D0 8 Setting the Programming Code You should set your OWN programming code since the factory set code (999999) is easy to guess. a. b. c. d. While power is supplied to the controller, press “*” and enter “999999” followed by “#” to enter programming mode. Press “0” followed by the new programming code between 6 and 8 digits followed by “#”. Re-enter the new programming code entered above at step b. followed again by “#”. The new programming code is set. To exit programming mode press “*”. Appendix contents of kits LOCK RELEASE - 615220 + 615310 BREAK GLASS - RESETTABLE EGRESS BUTTON - PRESS TO EXIT MAGNETIC LOCK - EMU275-01 PROXIMITY TAGS - 260-03 PROXIMITY ISO CARDS - 260-01 BOX POWER SUPPLY 1.0 Amp DIN POWER SUPPLY 1.5 Amp 12V DC PROXIMITY READER - UPR DC260 - CONTROLLER DC260 - stand alone access control unit for 2000 users code KDC260/08 KDC260PC KDC260PT KDC260PCM KDC260PCR
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 6 Trapped : True Author : KonradSamczyk Creator : Serif DrawPlus 11, 0, 3, 23 (Feb 25, 14:12:55) Title : INDC260IG Create Date : 2017:08:02 09:42:59+01:00 Producer : PDFlib+PDI 6.0.0p2 (Win32)EXIF Metadata provided by EXIF.tools