Main 525 Series Delta Power Unit A C
User Manual: 525 Series
Open the PDF directly: View PDF 
.
Page Count: 20
| Download | |
| Open PDF In Browser | View PDF |
PUMP AND MOTOR COMBINATIONS Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 A Series CW Series C Series INDEX A Series Units Description Page 49 C Series Units 51 CW Series Units 53 WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Phone: (815) 397-6628 Fax: (815) 397-2526 Page 47 E-mail: delta@delta-power.com Page 48 PUMP AND MOTOR COMBINATIONS Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 A Series Units A1 thru A8 Pump/Motor A21 thru A27 Pump/Motor “A” Series pump/motor combinations are high quality pre-engineered packages designed to satisfy medium service, steady load and/or intermittent duty applications: hi-flow, low pressure, lube transfer, recirculation, scavenge and filtration. As shown below, a variety of performance characteristics are available through the combination of several pump configurations with single and/or three phase TEFC heavy-duty ball bearing motors. All combinations are bi-directional. The pumps, also available separately, feature high strength cast iron bodies with precision machined internal trapping grooves, hardened alloy gears and shafts, leaded bronze sleeve bearings and Buna-N seals and o-rings to provide long, quiet, trouble-free performance. Pump / Motor Specifications Data shown is for continuous duty. For intermittent peaking duty, 30 seconds at peak load, pressure as high as 150% is attainable, limited to 3000 PSI maximum. Pump Motor A154 ½ HP .1725 RPM 1 PHASE TEFC A354 ½ HP .1725 RPM 3 PHASE TEFC A174 ¾ HP .1725 RPM 1 PHASE TEFC A374 ¾ HP .1725 RPM 3 PHASE TEFC A1104 1 HP .1725 RPM 1 PHASE TEFC A3104 1 HP .1725 RPM 3 PHASE TEFC A1154 1½ HP .1725 RPM 1 PHASE TEFC A3154 1½ HP .1725 RPM 3 PHASE TEFC A1 .00028 GPR .31 GPM 1500 PSI A1+A154 .31 GPM 1500 PSI A1+A354 .25 GPM 2250 PSI A1+A174 .25 GPM 2250 PSI A1+A374 .25 GPM 2250 PSI A1+A1104 .25 GPM 2250 PSI A1+A3104 A2 .00047 GPR .70 GPM 900 PSI A2+A154 .70 GPM 900 PSI A2+A354 .65 GPM 1350 PSI A2+A174 .65 GPM 1350 PSI A2+A374 .58 GPM 1800 PSI A2+A1104 .58 GPM 1800 PSI A2+A3104 A4 .00081 GPR 1.33 GPM 525 PSI A4+A154 1.33 GPM 525 PSI A4+A354 1.28 GPM 775 PSI A4+A174 1.28 GPM 775 PSI A4+A374 1.25 GPM 1050 PSI A4+A1104 1.25 GPM 1050 PSI A4+A3104 1.17 GPM 1550 PSI A4+A1154 1.17 GPM 1550 PSI A4+A3154 A6 .00137 GPR 2.32 GPM 300 PSI A6+A154 2.32 GPM 300 PSI A6+A354 2.28 GPM 450 PSI A6+A174 2.28 GPM 450 PSI A6+A374 2.25 GPM 625 PSI A6+A1104 2.25 GPM 625 PSI A6+A3104 2.18 GPM 925 PSI A6+A1154 2.18 GPM 925 PSI A6+A3154 A8 .00202 GPR 3.46 GPM 200 PSI A8+A154 3.46 GPM 200 PSI A8+A354 3.44 GPM 300 PSI A8+A174 3.44 GPM 300 PSI A8+A374 3.40 GPM 425 PSI A8+A1104 3.40 GPM 425 PSI A8+A3104 3.34 GPM 625 PSI A8+A1154 3.34 GPM 625 PSI A8+A3154 A21 .00178 GPR 3.0 GPM 225 PSI A21+A154 3.0 GPM 225 PSI A21+A354 3.0 GPM 350 PSI A21+A174 3.0 GPM 350 PSI A21+A374 2.9 GPM 475 PSI A21+A1104 2.9 GPM 475 PSI A21+A3104 2.8 GPM 70 PSI A21+A1154 2.8 GPM 700 PSI A21+A3154 A23 .00304 GPR 5.3 GPM 150 PSI A23+A154 5.3 GPM 150 PSI A23+A354 5.2 GPM 200 PSI A23+A174 5.2 GPM 200 PSI A23+A374 5.2 GPM 275 PSI A23+A1104 5.2 GPM 275 PSI A23+A3104 5.1 GPM 425 PSI A23+A1154 5.1 GPM 425 PSI A23+A3154 A25 .00425 GPR 7.4 GPM 100 PSI A25+A154 7.4 GPM 100 PSI A25+A354 7.3 GPM 150 PSI A25+A174 7.3 GPM 150 PSI A25+A374 7.3 GPM 200 PSI A25+A1104 7.3 GPM 200 PSI A25+A3104 7.2 GPM 300 PSI A25+A1154 7.2 GPM 300 PSI A25+A3154 A27 .00633 GPR 10.9 GPM 75 PSI A27+A154 10.9 75 PSI A27+A354 11.0 GPM 100 PSI A27+A174 11.0 GPM 100 PSI A27+A374 11.0 GPM 125 PSI A27+A1104 11.0 GPM 125 PSI A27+A3104 10.9 GPM 200 PSI A27+A1154 10.9 GPM 200 PSI A27+A3154 WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Phone: (815) 397-6628 Fax: (815) 397-2526 Page 49 E-mail: delta@delta-power.com PUMP AND MOTOR COMBINATIONS Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 A1 thru A8 Pump/Motor A21 thru A27 Pump/Motor Pump Part No. A1 A2 A4 A6 A8 A21 A23 A25 A27 Dim. "D" 2.48 2.57 2.74 3.02 3.34 4.24 4.54 4.76 5.32 Motor Part No. A154 A354 A174 A374 A1104 A3104 A1154 A3154 Dim. "A" 9.62 9.00 1.62 10.50 11.25 10.00 12.25 10.00 Note: Motor and Bracket dimensions subject to change due to availability of inventory. Performance Data WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Phone: (815) 397-6628 Fax: (815) 397-2526 Page 50 E-mail: delta@delta-power.com PUMP AND MOTOR COMBINATIONS Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 C Series Units C1 thru C8 Pump/Motor Combinations All “C” Series pump/motor units are bi-directional. The precision alignment of the motor to “C” Series is assured by a machined adaptor bracket. The ½ to 1 ½ H.P. electric motors are frame 56, continuous duty, ball-bearing, totally enclosed, fan cooled units of the highest quality. The motors are offered as standard in either single phase 115, 230 volt, 1750 RPM, or 208 , 230, 460 volt, 1750 RPM, 50/60 cycle. Pump / Motor Specifications Data shown is for continuous duty. For intermittent peaking duty 30 seconds at peak load, pressure as high as 150% is attainable, limited to 3000 PSI maximum. Pump C1 C2 C4 C6 C8 .00028 GPR .00047 GPR .00081 GPR .00137 GPR .00202 GPR Motor C154 .31 GPM .70 GPM 1.33 GPM 2.32 GPM 3.46 GPM ½ HP .1725 RPM 1500 PSI 900 PSI 525 PSI 300 PSI 200 PSI 1 PHASE TEFC C1+C154 C2+C154 C4+C154 C6+C154 C8+C154 C354 .31 GPM .70 GPM 1.33 GPM 2.32 GPM 3.46 GPM ½ HP .1725 RPM 1500 PSI 900 PSI 525 PSI 300 PSI 200 PSI 3 PHASE TEFC C1+C354 C2+C354 C4+C354 C6+C354 C8+C354 C174 .25 GPM .65 GPM 1.28 GPM 2.28 GPM 3.44 GPM ¾ HP .1725 RPM 2250 PSI 1350 PSI 775 PSI 450 PSI 300 PSI 1 PHASE TEFC C1+C174 C2+C174 C4+C174 C6+C174 C8+C174 C374 .25 GPM .65 GPM 1.28 GPM 2.28 GPM 3.44 GPM ¾ HP .1725 RPM 2250 PSI 1350 PSI 775 PSI 450 PSI 300 PSI 3 PHASE TEFC C1+C374 C2+C374 C4+C374 C6+C374 C8+C374 C1104 .25 GPM .58 GPM 1.25 GPM 2.25 GPM 3.40 GPM 1 HP .1725 RPM 2250 PSI 1800 PSI 1050 PSI 625 PSI 425 PSI 1 PHASE TEFC C1+C1104 C2+C1104 C4+C1104 C6+C1104 C8+C1104 C3104 .25 GPM .58 GPM 1.25 GPM 2.25 GPM 3.40 GPM 1 HP .1725 RPM 2250 PSI 1800 PSI 1050 PSI 625 PSI 425 PSI 3 PHASE TEFC C1+C3104 C2+C3104 C4+C3104 C6+C3104 C8+C3104 C1154 1.17 GPM 2.18 GPM 3.34 GPM 1½ HP .1725 RPM 1550 PSI 925 PSI 625 PSI 1 PHASE TEFC C4+C1154 C6+C1154 C8+C1154 C3154 1.17 GPM 2.18 GPM 3.34 GPM 1½ HP .1725 RPM 1550 PSI 925 PSI 625 PSI 3 PHASE TEFC C4+C3154 C6+C3154 C8+C3154 WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Phone: (815) 397-6628 Fax: (815) 397-2526 Page 51 E-mail: delta@delta-power.com PUMP AND MOTOR COMBINATIONS Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 Pump Part C1 C2 C4 C6 C8 Dim. "D" 2.48 2.57 2.74 3.02 3.34 Motor Part C154 C354 C174 C374 C1104 C3104 C1154 C3154 Dim. "A" 9.62 9.25 10.62 10.50 11.25 10.00 12.25 10.25 Note: Motor and Bracket dimensions subject to change due to availability of inventory. Performance Data WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Phone: (815) 397-6628 Fax: (815) 397-2526 Page 52 E-mail: delta@delta-power.com PUMP AND MOTOR COMBINATIONS Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 CW Series Units CW21 thru CW27 Pump/Motor Combination CW41 thru CW49 Pump/Motor Combination All “CW” Series pump/motor units are bi-directional. The precision alignment of the motor to “CW” Series is assured by a machined adaptor bracket. The 3 to 20 H.P. electric motors are frame 182TC to 256TC, continuous duty, ball-bearing, totally enclosed, fan cooled units of the highest quality. The motors are offered as standard in either three phase 115, 230 volt, 1750 RPM, or 208, 230, 460 volt, 1750 RPM, 50/60 cycle. Pump / Motor Specifications Data shown is for continuous duty. For intermittent peaking duty, 30 seconds at peak load, pressure as high as 150% is attainable, limited to 3000 PSI maximum. Motor (All 1750 RPM, 3 Phase, TEFC) 3304 3 HP 182TC Frame 3504 5 HP 184TC Frame 3754 7 ½ HP 213TC Frame 31004 10 HP 215TC Frame 31504 15 HP 254TC Frame 32004 20 HP 256TC Frame CW21 .00178 GPR CW21-3304 2.4 GPM 1400 PSI CW21-3504 2.1 GPM 2350 PSI CW23 .00304 GPR CW23-3304 4.8 GPM 825 PSI CW23-3504 4.5 GPM 1375 PSI CW23-3754 4.1 GPM 2050 PSI CW25 .00425 GPR CW25-3304 7.1 GPM 600 PSI CW25-3504 6.6 GPM 1000 PSI CW25-3754 6.2 GPM 1475 PSI CW25-31004 6.0 GPM 1875 PSI CW27 .00633 GPR CW27-3304 10.8 GPM 400 PSI CW27-3504 10.3 GPM 650 PSI CW27-3754 10.2 GPM 1000 PSI CW27-31004 9.9 GPM 1325 PSI Pump CW41 .0068 GPR CW41-3304 11.4 GPM 375 PSI CW41-3504 11.2 GPM 625 PSI CW41-3754 11.0 GPM 925 PSI CW41-31004 10.9 GPM 1225 PSI CW41-31504 9.7 GPM 1850 PSI CW43 .0102 GPR CW43-3304 17.2 GPM 250 PSI CW43-3504 17.0 GPM 400 PSI CW43-3754 16.9 GPM 625 PSI CW43-31004 16.8 GPM 825 PSI CW43-31504 16.5 GPM 1225 PSI CW43-32004 16.25 GPM 1650 PSI CW45 .0132 GPR CW45-3304 22.5 GPM 200 PSI CW45-3504 22.2 GPM 325 PSI CW45-3754 22.0 GPM 475 PSI CW45-31004 21.8 GPM 625 PSI CW45-31504 21.0 GPM 950 PSI CW45-32004 19.8 GPM 1275 PSI CW47 .0169 GPR CW47-3304 28.8 GPM 150 PSI CW47-3504 28.4 GPM 250 PSI CW47-3754 28.2 GPM 375 PSI CW47-31004 28.0 GPM 500 PSI CW47-31504 27.9 GPM 750 PSI CW47-32004 27.8 GPM 1000 PSI CW49 .0192 GPR CW49-3304 32.8 GPM 125 PSI CW49-3504 32.5 GPM 225 PSI CW49-3754 32.3 GPM 325 PSI CW49-31004 32.0 GPM 425 PSI CW49-31504 31.8 GPM 650 PSI CW49-32004 31.6 GPM 875 PSI WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Phone: (815) 397-6628 Fax: (815) 397-2526 Page 53 E-mail: delta@delta-power.com PUMP AND MOTOR COMBINATIONS Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 CW21 thru CW27 Pump/Motor Combinations CW41 thru CW49 Pump/Motor Combinations MOTOR MODEL 3304 3504 3754 31004 31504 32004 A 13.13 14.13 15.81 17.31 18.91 20.66 B C 9.47 9.47 10.86 10.86 12.56 1.56 12.56 1.56 D 7.19 7.19 8.66 8.66 9.44 9.44 E 4.73 4.73 5.43 5.43 6.28 6.28 F 5.69 5.69 6.66 6.66 7.44 7.44 Dimensions G H 3.75 9.23 3.75 9.23 4.25 10.69 4.25 10.69 5.00 12.56 5.00 12.56 I 7.25 7.75 8.56 9.31 9.78 10.66 J K 2.25 5.50 2.75 6.50 2.75 6.50 3.25 8.00 4.13 9.50 5.00 11.25 L 3.38 3.38 4.00 4.00 4.50 4.50 M 3.87 3.87 4.34 4.34 5.09 5.09 Note: Motor and Bracket dimensions subject to change due to availability of inventory. Pump Model CW21 CW23 CW25 CW27 CW41 CW43 CW45 CW47 CW49 M 0.63 0.63 0.63 0.63 0.91 0.91 0.91 0.91 0.91 N 3.2 3.5 3.78 4.27 5.41 5.72 6.06 6.47 6.72 Dimensions P R 1.75 1.75 1.75 1.75 4.22 5.38 4.59 5.38 4.94 5.38 5.41 5.38 5.59 5.38 S 3/4 NPTF (2) 3/4 NPTF (2) 3/4 NPTF (2) 3/4 NPTF (2) 1 1/4 NPTF (2) 1 1/4 NPTF (2) 1 1/4 NPTF (2) 1 1/4 NPTF (2) 1 1/4 NPTF (2) Performance Data WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Phone: (815) 397-6628 Fax: (815) 397-2526 Page 54 E-mail: delta@delta-power.com PUMP, MOTOR AND TANK COMBINATIONS Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 B Series CT Series BCV Series INDEX Description Page 57 B Series Units CT and CX Series Units 59 BCV Series Units 61 WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Phone: (815) 397-6628 Fax: (815) 397-2526 Page 55 E-mail: delta@delta-power.com Page 56 PUMP, MOTOR AND TANK COMBINATIONS Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 B Series Power Packages B Series Power Unit with 1 Gallon Tank B Series Power Unit with 5 Gallon Tank . Caution: Relief valves must be set prior to installation. They are not factory preset. Relief valves will include springs which will allow relief valves settings to the pressures indicated on the chart. With the 1, 1 ½ or 2 ½ gallon tank and TEFC 56 frame motors, B models are one of the most compact, utilized power packages available today. The 1 and 1 ½ gallon tank unit includes a custom heat dissipating aluminum tank and an externally adjustable relief valve. Units can be mounted horizontally (foot down) or vertically (tank down). TEFC motors are 56 frame specially configured for Delta Power B units, 4 pole motors run at the highly desirable speed of 1725 RPM rather than the 3450 version normally used on competitor’s units. While each unit is a complete power unit, their scope is radically increased by adapting to valve accessories like 85005677 found in section 9 of this catalog. Please refer to Section 9 for other adaptations. Pump / Motor Specifications Data shown is for continuous duty. For intermittent peaking duty, 30 seconds at peak load, pressure as high as 150% is attainable, limited to 3000 PSI maximum. Note: 3 phase motors can run on 50/60 cycles but flow at 50 cycles will be reduced to 5/6 of noted flow since the motor will run at 5/6 of the RPM. Pump Motor B154 1/2 H.P. 1725 RPM 1 Phase TEFC B354 1/2 H.P. 1725 RPM 3 Phase TEFC B174 3/4 H.P. 1725 RPM 1 Phase TEFC B374 3/4 H.P. 1725 RPM 3 Phase TEFC B1104 1 H.P. 1725 RPM 1 Phase TEFC B3104 1 H.P. 1725 RPM 3 Phase TEFC B1154 1-1/2 H.P. 1725 RPM 1 Phase TEFC B3154 1-1/2 H.P. 1725 RPM 3 Phase TEFC B3204 2 H.P. 1725 RPM 3 Phase TEFC B3304 3 H.P. 1725 RPM 3 Phase TEFC Intermittent Duty B1 B2 .00028 GPR .00047 GPR .31 GPM .70 GPM 1500 PSI 900 PSI B1+B154 B2+B154 .31 GPM .70 GPM 1500 PSI 900 PSI B1+B354 B2+B354 .25 GPM .65 GPM 2250 PSI 1350 PSI B1+B174 B2+B174 .25 GPM .65 GPM 2250 PSI 1350 PSI B1+B374 B2+B374 .25 GPM .58 GPM 2250 PSI 1800 PSI B1+B1104 B2+B1104 .25 GPM .58 GPM 2250 PSI 1800 PSI B1+B3104 B2+B3104 B4 B6 B8 .0081 GPR .00137 GPR .00202 GPR 1.33 GPM 2.32 GPM 3.46 GPM 525 PSI 300 PSI 200 PSI B4+B154 B6+B154 B8+B154 1.33 GPM 2.32 GPM 3.46 GPM 525 PSI 300 PSI 200 PSI B4+B354 B6+B354 B8+B354 1.28 GPM 2.28 GPM 3.44 GPM 775 PSI 450 PSI 300 PSI B4+B174 B6+B174 B8+B174 1.28 GPM 2.28 GPM 3.44 GPM 775 PSI 450 PSI 300 PSI B4+B374 B6+B374 B8+B374 1.25 GPM 2.25 GPM 3.40 GPM 1050 PSI 625 PSI 425 PSI B4+B1104 B6+B1104 B8+B1104 1.25 GPM 2.25 GPM 3.40 GPM 1050 PSI 625 PSI 425 PSI B4+B3104 B6+B3104 B8+B3104 1.17 GPM 2.18 GPM 3.34 GPM 1550 PSI 925 PSI 625 PSI B4+B1154 B6+B1154 B8+B1154 1.17 GPM 2.18 GPM 3.34 GPM 1550 PSI 925 PSI 625 PSI B4+B3154 B6+B3154 B8+B3154 2.06 GPM 3.26 GPM 1225 PSI 850 PSI B6+B3204 B8+B3204 1.90 GPM 3.12 GPM 1850 PSI 1250 PSI B6+B3304 B8+B3304 B6+B174 Pump/Motor/1 Gal. Tank To order Power unit with 1-1/2 gallon tank, specify as follows B6+B174-1-1/2 TK Pump/Motor/1-1/2 Gal. Tank To order Power unit with 2-1/2 gallon tank, specify as follows B6+B174-2-1/2 TK Pump/Motor/2-1/2 Gal. Tank To order Power unit with 5 gallon tank, (add letter T), as follows BT6+B174 Pump/Motor/5 Gal. Tank To order Power unit with 5 gallon tank, (add letter X), as follows BX6+B174 Pump/Motor/10 Gal. Tank WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Phone: (815) 397-6628 Fax: (815) 397-2526 Page 57 E-mail: delta@delta-power.com PUMP, MOTOR AND TANK COMBINATIONS Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 B Series Power Unit with 1 Gallon Tank Dimension A B C MOTOR B154 11.13 19.69 19.38 10.50 19.06 18.75 B354 B174 12.00 19.06 18.75 10.50 19.06 18.75 B374 12.13 20.69 20.38 B1104 B3104 11.13 19.56 19.25 13.01 21.06 20.75 B1154 B3154 11.00 19.56 19.25 B3204 12.13 20.69 20.38 B3304 13.00 21.44 21.13 Note: Motor dimensions are approximate dependent on current availability B Series Power Unit with 5 Gallon Tank E 9.88 9.25 10.75 9.25 10.88 9.88 11.76 9.75 10.88 11.75 Ordering - Service Parts Performance Data WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Phone: (815) 397-6628 Fax: (815) 397-2526 Page 58 E-mail: delta@delta-power.com PUMP, MOTOR AND TANK COMBINATIONS Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 CT and CX Series Power Packages Pump motor combinations are offered with 5 or 10 gallon tanks to form complete hydraulic power packages. When ordering, specify pump, motor, and tank sizes. Adding a “T” to the model numbers of pump and motor in the chart designates a 5 gallon tank. Using an “X” in the number instead of the “T”, designates a 10 gallon tank. For example, CT6 + C354 would specify a complete unit: pump C6, motor size C354, 5 gallon tank “T”. To order a 10 gallon tank combination, the number would be CX6 + C354. All tanks include the following: suction strainer (100 mesh); breather (40 micron); oil sight level glass; motor mounting holes drilled and tapped. Pump-motor-tank combinations include piping to the suction side of the pump. The precision alignment of the motor to the “C” Series pump is assured by a machined adaptor bracket. The ½ to 1 ½ H.P. electric motors are frame 56C, continuous duty, ball-bearing, totally enclosed, fan cooled units of the highest quality. The motors are offered as standard in either single phase, 115 and 230 volt, 1750 RPM or three phase, 208, 230 and 460 volt, 1750 RPM, 50/60 cycle current. Pump / Motor Specifications Data shown is for continuous duty. For intermittent peaking duty, 30 seconds at peak load, pressure as high as 150% is attainable, limited to 3000 PSI maximum. Note: 3 phase motors can run on 50/60 cycles but flow at 50 cycles will be reduced to 5/6 of noted flow since the motor will run at 5/6 of the RPM. Pump Motor C154 1/2 H.P. 1725 RPM 1 Phase TEFC C354 1/2 H.P. 1725 RPM 3 Phase TEFC C174 3/4 H.P. 1725 RPM 1 Phase TEFC C374 3/4 H.P. 1725 RPM 3 Phase TEFC C1104 1 H.P. 1725 RPM 1 Phase TEFC C3104 1 H.P. 1725 RPM 3 Phase TEFC C1154 1-1/2 H.P. 1725 RPM 1 Phase TEFC C3154 1-1/2 H.P. 1725 RPM 3 Phase TEFC C1 C2 .00028 GPR .00047 GPR .31 GPM .70 GPM 1500 PSI 900 PSI C1+C154 C2+C154 .31 GPM .70 GPM 1500 PSI 900 PSI C1+C354 C2+C354 .25 GPM .65 GPM 2250 PSI 1350 PSI C1+C174 C2+C174 .25 GPM .65 GPM 2250 PSI 1350 PSI C1+C374 C2+C374 .25 GPM .58 GPM 2250 PSI 1800 PSI C1+C1104 C2+C1104 .25 GPM .58 GPM 2250 PSI 1800 PSI C1+C3104 C2+C3104 C4 C6 C8 .0081 GPR .00137 GPR .00202 GPR 1.33 GPM 2.32 GPM 3.46 GPM 525 PSI 300 PSI 200 PSI C4+C154 C6+C154 C8+C154 1.33 GPM 2.32 GPM 3.46 GPM 525 PSI 300 PSI 200 PSI C4+C354 C6+C354 C8+C354 1.28 GPM 2.28 GPM 3.44 GPM 775 PSI 450 PSI 300 PSI C4+C174 C6+C174 C8+C174 1.28 GPM 2.28 GPM 3.44 GPM 775 PSI 450 PSI 300 PSI C4+C374 C6+C374 C8+C374 1.25 GPM 2.25 GPM 3.40 GPM 1050 PSI 625 PSI 425 PSI C4+C1104 C6+C1104 C8+C1104 1.25 GPM 2.25 GPM 3.40 GPM 1050 PSI 625 PSI 425 PSI C4+C3104 C6+C3104 C8+C3104 1.17 GPM 2.18 GPM 3.34 GPM 1550 PSI 925 PSI 625 PSI C4+C1154 C6+C1154 C8+C1154 1.17 GPM 2.18 GPM 3.34 GPM 1550 PSI 925 PSI 625 PSI C4+C3154 C6+C3154 C8+C3154 WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Phone: (815) 397-6628 Fax: (815) 397-2526 Page 59 E-mail: delta@delta-power.com PUMP, MOTOR AND TANK COMBINATIONS Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 CT Series Power Unit with 5 Gallon Tank CX Series Power Unit with 10 Gallon Tank MOTOR DIMENSION C154 13.38 C354 12.75 C174 14.25 C374 12.75 C1104 14.43 C3104 13.43 C31154 15.25 C3154 13.38 PUMP C1 C2 C4 C6 C8 DIMENSION 2.48 2.57 2.74 3.02 3.34 Note: Motor and bracket dimensions subject to change due to availability of inventory. Performance Data WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Phone: (815) 397-6628 Fax: (815) 397-2526 Page 60 E-mail: delta@delta-power.com PUMP, MOTOR AND TANK COMBINATIONS Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 BCV Series Power Packages Vertical Pump Motor, combinations 3.5 to 10.5GPM with 3 to 20 HP, C face, TEFC motors (Pressures to 3000 PSI). Available on 15, 20 and 30 gallon non JIC reservoirs. Each unit features a fixed displacement gear pump submerged below oil level for assured pump filling and quiet operation. Filler breather assembly, suction strainer, sight level and temperature gauge standard. Optional valve systems result in a complete custom hydraulic Power Unit. These units use the PH series pumps noted in the pump section of the catalog. Accessories/Options • Relief valve • Pressure gauge and shutoff • Return line filter • Directional control valves • Single-phase motors • Explosion-proof motors • Custom manifolds • Pressure switch Pump / Motor Specifications Data shown is for continuous duty. For intermittent peaking duty 30 seconds at peak load, pressure as high as 150% is attainable, limited to 3000 PSI maximum. Pump Motor 3304 3 H.P. 1725 RPM 182TC Frame 3 Phase TEFC 3504 5 H.P. 1725 RPM 184TC Frame 3 Phase TEFC 3754 7.5 H.P. 1725 RPM 213TC Frame 3 Phase TEFC 31004 10 H.P. 1725 RPM 215TC Frame 1 Phase TEFC 31504 15 H.P. 1725 RPM 254TC Frame 3 Phase TEFC 32004 20 H.P. 1725 RPM 256TC Frame 3 Phase TEFC BCV312 .499 CIR BCV313 .589 CIR BCV314 .677 CIR BCV315 .860 CIR BCV318 1.220 CIR BCV319 1.403 CIR 1225 PSI 1000 PSI 3.7 GPM 4.4 GPM BCV312-3304 BCV313-3304 900 PSI 5.0 GPM BCV314-3304 700 PSI 6.4 GPM BCV315-3304 500 PSI 9.1 GPM BCV318-3304 425 PSI 10.4 GPM BCV319-3304 2050 PSI 1725 PSI 3.7 GPM 4.4 GPM BCV312-3504 BCV313-3504 1500 PSI 5.0 GPM BCV314-3504 1200 PSI 6.4 GPM BCV315-3504 825 PSI 9.1 GPM BCV318-3504 725 PSI 10.4 GPM BCV319-3504 3000 PSI 2600 PSI 3.6 GPM 4.3 GPM BCV312-3754 BCV313-3754 2250 PSI 4.9 GPM BCV314-3754 1725 PSI 6.4 GPM BCV315-3754 1250 PSI 9.1 GPM BCV318-3754 1100 PSI 10.3 GPM BCV319-3754 3000 PSI 3000 PSI 2325 PSI 1675 PSI 1450 PSI 4.3 GPM 4.9 GPM 6.3 GPM 9.0 GPM 10.3 GPM BCV313-31004 BCV314-31004 BCV315-31004 BCV318-31004 BCV319-31004 3000 PSI 2500 PSI 2200 PSI 6.3 GPM 9.0 GPM 10.2 GPM BCV315-31504 BCV318-31504 BCV319-31504 2850 PSI 2500 PSI 9.0 GPM 10.2 GPM BCV318-32004 BCV319-32004 Note: 3 phase motors can run on 50/60 cycles but flow at 50 cycles will be reduced to 5/6 of noted flow since the motor will run at 5/6 of the RPM. WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Phone: (815) 397-6628 Fax: (815) 397-2526 Page 61 E-mail: delta@delta-power.com PUMP, MOTOR AND TANK COMBINATIONS Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 BCV Series 15, 20, and 30 Gallon Tanks TANK T-15V T-20V T-30V MOTOR "A" "B" "B" "B" 12.96 25.52 29.52 37.52 3304 13.96 26.52 30.52 38.52 3504 13.99 26.92 29.92 38.92 3754 16.49 29.05 33.05 41.05 31004 31504 17.87 30.43 34.43 42.43 32004 19.63 32.19 36.19 44.19 12.56 16.56 24.56 "C" Note: Motor and Flange dimensions are approximate dependent on current availability Performance Data WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Phone: (815) 397-6628 Fax: (815) 397-2526 Page 62 E-mail: delta@delta-power.com PUMP, MOTOR, VALVE AND TANK COMBINATIONS Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 BV Series INDEX Description BV Series Units Page 65 WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Phone: (815) 397-6628 Fax: (815) 397-2526 Page 63 E-mail: delta@delta-power.com Page 64 PUMP, MOTOR, VALVE AND TANK COMBINATIONS Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 BV Series Power Packages BV Series with Valve and 1 Gallon Tank BV Series with Valve and 10 Gallon Tank Caution: Relief valves must be set prior to installation. They are not factory preset. Relief valves will include springs which will allow relief valves settings to the pressures indicated on the chart. Delta BV models provide increased flexibility by incorporating a standard 4way 3position valve directly to the power unit. In all, over 100 standard model and combinations to choose from. Satisfy many custom circuit requirements through use of standard Delta valves, manifolds and stack modules illustrated. Pump / Motor Specifications Data shown is for continuous duty. For intermittent peaking duty, 30 seconds at peak load, pressure as high as 150% is attainable, limited to 3000 PSI maximum. Note: 3 phase motors can run on 50/60 cycles but flow at 50 cycles will be reduced to 5/6 of noted flow since the motor will run at 5/6 of the RPM. Pump BV1 BV2 BV4 .00028 GPR .00047 GPR .0081 GPR B154 .31 GPM .70 GPM 1.33 GPM 1/2 H.P. 1725 RPM 1500 PSI 900 PSI 525 PSI 1 Phase TEFC BV1+B154 BV2+B154 BV4+B154 B354 .31 GPM .70 GPM 1.33 GPM 1/2 H.P. 1725 RPM 1500 PSI 900 PSI 525 PSI 3 Phase TEFC BV1+B354 BV2+B354 BV4+B354 B174 .25 GPM .65 GPM 1.28 GPM 3/4 H.P. 1725 RPM 2250 PSI 1350 PSI 775 PSI 1 Phase TEFC BV1+B174 BV2+B174 BV4+B174 B374 .25 GPM .65 GPM 1.28 GPM 3/4 H.P. 1725 RPM 2250 PSI 1350 PSI 775 PSI 3 Phase TEFC BV1+A374 BV2+B374 BV4+B374 B1104 .25 GPM .58 GPM 1.25 GPM 1 H.P. 1725 RPM 2250 PSI 1800 PSI 1050 PSI 1 Phase TEFC BV1+B1104 BV2+B1104 BV4+B1104 B3104 .25 GPM .58 GPM 1.25 GPM 1 H.P. 1725 RPM 2250 PSI 1800 PSI 1050 PSI 3 Phase TEFC BV1+B3104 BV2+B3104 BV4+B3104 B1154 1.17 GPM 1-1/2 H.P. 1725 RPM 1550 PSI 1 Phase TEFC BV4+B1154 B3154 1.17 GPM 1-1/2 H.P. 1725 RPM 1550 PSI 3 Phase TEFC BV4+B3154 B3204 2 H.P. 1725 RPM 3 Phase TEFC B3304 3 H.P. 1725 RPM 3 Phase TEFC Intermittent Duty Motor BV6 .00137 GPR 2.32 GPM 300 PSI BV6+B154 2.32 GPM 300 PSI BV6+B354 2.28 GPM 450 PSI BV6+B174 2.28 GPM 450 PSI BV6+B374 2.25 GPM 625 PSI BV6+B1104 2.25 GPM 625 PSI BV6+B3104 2.18 GPM 925 PSI BV6+B1154 2.18 GPM 925 PSI BV6+B3154 2.06 GPM 1225 PSI BV6+B3204 1.90 GPM 1850 PSI BV6+B3304 BV8 .00202 GPR 3.46 GPM 200 PSI BV8+B154 3.46 GPM 200 PSI BV8+B354 3.44 GPM 300 PSI BV8+B174 3.44 GPM 300 PSI BV8+B374 3.40 GPM 425 PSI BV8+B1104 3.40 GPM 425 PSI BV8+B3104 3.34 GPM 625 PSI BV8+B1154 3.34 GPM 625 PSI BV8+B3154 3.26 GPM 850 PSI BV8+B3204 3.12 GPM 1250 PSI BV8+B3304 BV6+B174 Pump/Motor/Valve/1 Gal. Tank To order Power unit with 1-1/2 gallon tank, specify as follows BV6+B174-1-1/2 TK Pump/Motor/Valve/1-1/2 Gal. Tank To order Power unit with 2-1/2 gallon tank, specify as follows BV6+B174-2-1/2 TK Pump/Motor/Valve/2-1/2 Gal. Tank To order Power unit with 5 gallon tank, (add letter T), as follows BVT6+B174 Pump/Motor/Valve/5 Gal. Tank To order Power unit with 5 gallon tank, (add letter X), as follows BVX6+B174 Pump/Motor/Valve/10 Gal. Tank Pump No. B1 B2 B4 B6 B8 Slip GPM / 100 PSI 0.015 0.017 0.020 0.025 0.030 GPM @ 0.PSI 1725 RPM 0.48 0.81 1.40 2.36 3.49 WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Phone: (815) 397-6628 Fax: (815) 397-2526 Page 65 E-mail: delta@delta-power.com PUMP, MOTOR, VALVE AND TANK COMBINATIONS Delta Power Company 4484 Boeing Drive - Rockford, IL 61109 BV Series Power Unit with 1 Gallon Tank Motor B154 B354 B174 B374 B1104 B3104 B1154 B3154 B3204 B3304 A 11.13 10.50 10.50 10.50 12.13 11.00 12.50 11.00 12.13 12.88 B 19.69 19.06 19.06 19.06 20.69 19.56 21.06 19.56 20.69 21.44 C 19.38 18.75 18.75 18.75 20.38 19.25 20.75 19.25 20.38 21.13 D 9.75 9.13 9.13 9.13 10.75 9.63 11.13 9.63 10.75 11.50 BVT Series with Valve and 5 Gallon Tank BVX Series with Valve and 10 Gallon Tank Directional Control Valves and Stack Modules Accessory Options SYMBOL DESCRIPTION Pressure gauge & shut off including installation with B or BV power units Part Number 110 VAC 220 VAC 4W3P Tandem Center 22020116 22020117 4W3P Open Center 22020118 22020119 4W3P Closed Center 22020120 22020121 4W3P Figure Four 22020122 22020123 2 1/2" Dia. Std. 2 1/2" Dia.Glyc. Pressure switch including installation Return line filter including installation (10 micron) nominal; 20 GPM maximum E 9.88 9.25 9.25 9.25 10.88 9.75 11.25 9.75 10.88 11.63 21001003 21001007 21002001 21004001 Stack Modules SYMBOL Performance Data DESCRIPTION Flow Control Meter In/Out Dual Pilot Operated Check (4:1 Ratio) Part No. 3000 PSI 85004206 3000 PSI 85004025 Bolt Kit No. BK-7 BK-7 WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability. Phone: (815) 397-6628 Fax: (815) 397-2526 Page 66 E-mail: delta@delta-power.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Modify Date : 2007:11:15 11:22:20-05:00 Create Date : 2007:11:15 11:20:51-05:00 Metadata Date : 2007:11:15 11:22:20-05:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - Main Index.doc Creator : Lehman Document ID : uuid:1cb6c92f-3856-47c5-b24e-0deec1d95f1f Instance ID : uuid:e2bdaaa4-5218-41f2-9717-579787d0139c Producer : Acrobat Distiller 7.0.5 (Windows) Has XFA : No Page Count : 20 Author : LehmanEXIF Metadata provided by EXIF.tools