14462 6 10 14 GAS CADDY OWNERS MANUAL Handy_GAS_CADDY_OWNERS_MANUAL Handy

User Manual: Handy_GAS_CADDY_OWNERS_MANUAL

Open the PDF directly: View PDF PDF.
Page Count: 2

Download14462 6-10-14 GAS CADDY OWNERS MANUAL Handy_GAS_CADDY_OWNERS_MANUAL Handy
Open PDF In BrowserView PDF
GC-30 GAS CADDY
INSTRUCTIONS

●

PARTS DRAWING

●

PARTS LIST

ITEM # 12652

ASSEMBLY
1. Remove all packaging and check carefully
for concealed shipping damage.
2. Take the handle arm and place on pump with slot end
on pump shaft. The use supplied nut and tighten secure
ly. Take the black handle and bolt, and thread into handle
and arm far enough that there is thread sticking through
the backside and use supplied nut on backside of handle
arm to lock black handle in place. Remove the red plugs
from pump and insert steel hex bushing into bottom side of
pump. Be sure to apply teflon tape to the threads of hex
bushing.
3. Slide wheels onto axle and snap on the retaining rings.
4. Install pump and hose. Refer to parts illustration.
5. If desired, mount caddy identification label (Unleaded,
Gasoline, Diesel or Mixed Fuels) on front or side of caddy.
6. Always have ground wire clamp attached to a known
ground.

OPERATION

Note: Decals included to label
contents of caddy. Cut and apply.

1. This pump is furnished with a hose to transfer fuel.
2. Rotate pump handle briskly to obtain initial prime.
3. Rotate pump handle clockwise to draw from the caddy - counterclockwise rotation for suction.
NOTE: The arrow which is on base plate inside gauge, must point to opposite corner of gas caddy.
This is necessary to prevent gauge float arm from binding against tank sides.
HANDY, DIVISION OF JANCO INDUSTRIES, INC.
401 South 2nd. Marshalltown, IA 50158 Ph: 855-752-5446

Fax 641-752-1205

www.handyindustries.com

GC-30 GAS CADDY
PARTS LIST

10416

5 - PACK DECALS FOR TANK

GAUGE ASSEMBLY & VENT DOME DETAIL
10409

10409 GAUGE REPAIR KIT (GAUGE ONLY)
10366

10366 GAUGE ASSEMBLY
10337 DOME (NOT INCLUDED IN GAUGE ASSEMBLY KIT)

10337

HANDY LIMITED WARRANTY
Handy, Division of Janco Industries, Inc. warrants to the original purchaser of this product, all parts to be free
from defects in manufacture for a period of one (1) year from date of delivery. Notice of a defective part must
be received in writing at Handy Industries within one (1) year of purchase. All defective parts must be
returned to Handy Industries and which, upon our examination any parts which are defective in manufacture
or workmanship, will be replaced or put in good operating condition. This warranty does not apply to damage resulting from accident, improper installation, repair, operation or maintenance, negligence or neglect.
THE COST OF SUCH REPLACEMENT OR REPAIR SHALL BE EXCLUSIVE REMEDY FOR ANY BREACH OF ANY WARRANTY AND HANDY JANCO DIVISION SHALL NOT BE LIABLE TO ANY PERSON FOR CONSEQUENTIAL DAMAGE, OR
INJURY, OR COMMERCIAL LOSS RESULTING FROM ANY BREACH OF WARRANTY. HANDY DIV. JANCO INDUSTRIES
MAKES NO WARRANTY OR MERCHANTABILITY, MAKES NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE
AND MAKES NO OTHER WARRANTY EXPRESSED OR IMPLIED, INCLUDING IMPLIED WARRANTY ARISING FROM THE
COURSE OR DEALING OR USAGE OF THE TRADE.

6-10-14 14462
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2014:06:10 09:55:07
Modify Date                     : 2014:06:10 09:55:07
Title                           : 14462 6-10-14 GAS CADDY OWNERS MANUAL.qxd
Creator                         : PScript5.dll Version 5.2.2
Author                          : eschuler
EXIF Metadata provided by EXIF.tools

Navigation menu